From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
To: linux-media@vger.kernel.org
Subject: Re: [PATCHv2 00/19] saa7146: convert to vb2
Date: Fri, 24 Mar 2023 11:18:42 +0100 [thread overview]
Message-ID: <8d39dc5d-8831-c12d-7126-3934d52d1108@xs4all.nl> (raw)
In-Reply-To: <e4f657a5-589b-62bb-142f-ff5c90535b32@xs4all.nl>
On 23/03/2023 18:23, Hans Verkuil wrote:
> On 23/03/2023 16:53, Hans Verkuil wrote:
>> This series converts the saa7146 driver to vb2.
>>
>> Tested with my mxb board, Hexium Orion and Gemini boards and av7110 boards
>> (DVB-C and DVB-T).
>>
>> I don't have a av7110 card with analog video capture, so that remains
>> untested.
>>
>> Note that the first patch fixes a regression that the removal of overlay
>> support introduced.
>>
>> Regards,
>>
>> Hans
>
> Just ignore this series, something is still wrong.
No, it's fine after all.
I noticed that the Hexium Gemini card swaps the U and V components, but I discovered
that it was like that for a long time, even in kernel 5.10.
I can make it work by changing a h_offset value, but I will have to do a bit more
testing later.
It's independent of this work, so I leave this series as-is.
Regards,
Hans
>
> Regards,
>
> Hans
>
>>
>> Hans Verkuil (19):
>> media: common: saa7146: disable clipping
>> common/saa7146: fix VFL direction for vbi output
>> media: pci: saa7146: hexium_orion: initialize input 0
>> media: saa7146: drop 'dev' and 'resources' from struct saa7146_fh
>> media: common: saa7146: drop 'fmt' from struct saa7146_buf
>> media: common: saa7146: replace BUG_ON by WARN_ON
>> staging: media: av7110: replace BUG_ON by WARN_ON
>> media: common: saa7146: fix broken V4L2_PIX_FMT_YUV422P support
>> media: common: saa7146: use for_each_sg_dma_page
>> media: saa7146: convert to vb2
>> media: common: saa7146: fix compliance problems with field handling
>> media: common: saa7146: check minimum video format size
>> media: common: saa7146: fall back to V4L2_PIX_FMT_BGR24
>> media: common: saa7146: allow S_STD(G_STD)
>> media: mxb: update the tvnorms when changing input
>> media: common: saa7146: add support for missing
>> .vidioc_try_fmt_vbi_cap
>> media: mxb: allow tuner/input/audio ioctls for vbi
>> media: pci: saa7146: advertise only those TV standard that are
>> supported
>> staging: media: av7110: fix VBI output support
>>
>> drivers/media/common/saa7146/Kconfig | 2 +-
>> drivers/media/common/saa7146/saa7146_core.c | 40 +-
>> drivers/media/common/saa7146/saa7146_fops.c | 349 +++-------
>> drivers/media/common/saa7146/saa7146_hlp.c | 61 +-
>> drivers/media/common/saa7146/saa7146_vbi.c | 287 ++++-----
>> drivers/media/common/saa7146/saa7146_video.c | 642 ++++++-------------
>> drivers/media/pci/saa7146/hexium_gemini.c | 23 +-
>> drivers/media/pci/saa7146/hexium_orion.c | 24 +-
>> drivers/media/pci/saa7146/mxb.c | 53 +-
>> drivers/media/pci/ttpci/budget-av.c | 4 +-
>> drivers/staging/media/av7110/av7110.c | 6 +-
>> drivers/staging/media/av7110/av7110_hw.c | 3 +-
>> drivers/staging/media/av7110/av7110_v4l.c | 116 ++--
>> include/media/drv-intf/saa7146_vv.h | 44 +-
>> 14 files changed, 598 insertions(+), 1056 deletions(-)
>>
>
prev parent reply other threads:[~2023-03-24 10:18 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-23 15:53 [PATCHv2 00/19] saa7146: convert to vb2 Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 01/19] media: common: saa7146: disable clipping Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 02/19] common/saa7146: fix VFL direction for vbi output Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 03/19] media: pci: saa7146: hexium_orion: initialize input 0 Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 04/19] media: saa7146: drop 'dev' and 'resources' from struct saa7146_fh Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 05/19] media: common: saa7146: drop 'fmt' from struct saa7146_buf Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 06/19] media: common: saa7146: replace BUG_ON by WARN_ON Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 07/19] staging: media: av7110: " Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 08/19] media: common: saa7146: fix broken V4L2_PIX_FMT_YUV422P support Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 09/19] media: common: saa7146: use for_each_sg_dma_page Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 10/19] media: saa7146: convert to vb2 Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 11/19] media: common: saa7146: fix compliance problems with field handling Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 12/19] media: common: saa7146: check minimum video format size Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 13/19] media: common: saa7146: fall back to V4L2_PIX_FMT_BGR24 Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 14/19] media: common: saa7146: allow S_STD(G_STD) Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 15/19] media: mxb: update the tvnorms when changing input Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 16/19] media: common: saa7146: add support for missing .vidioc_try_fmt_vbi_cap Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 17/19] media: mxb: allow tuner/input/audio ioctls for vbi Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 18/19] media: pci: saa7146: advertise only those TV standard that are supported Hans Verkuil
2023-03-23 15:53 ` [PATCHv2 19/19] staging: media: av7110: fix VBI output support Hans Verkuil
2023-03-23 17:23 ` [PATCHv2 00/19] saa7146: convert to vb2 Hans Verkuil
2023-03-24 10:18 ` Hans Verkuil [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8d39dc5d-8831-c12d-7126-3934d52d1108@xs4all.nl \
--to=hverkuil-cisco@xs4all.nl \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).