* Pinnacle 320cx -- /dev/video ?
@ 2014-05-29 12:38 Marek Kozlowski
2014-05-29 13:04 ` Devin Heitmueller
0 siblings, 1 reply; 2+ messages in thread
From: Marek Kozlowski @ 2014-05-29 12:38 UTC (permalink / raw)
To: linux-media
:-)
According to:
http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_RC
Pinnacle Expresscard 320cx ✔ Yes, in kernel since 2.6.26 2304:022e
USB2.0 dvb-usb-dib0700-1.20.fw
I've just bought this card and it is correctly recognized and
initialized, however it doesn't work. Precisely: tvtime and similar
applications say: `no video device' and no /dev/video0 nor similar
device files are created. Does the _analog_ part work? Am I missing sth?
/m
May 29 14:06:32 localhost kernel: [ 35.839778] dvb-usb: found a
'Pinnacle Expresscard 320cx' in cold state, will try to load a firmware
May 29 14:06:32 localhost kernel: [ 35.857310] dvb-usb: downloading
firmware from file 'dvb-usb-dib0700-1.20.fw'
May 29 14:06:33 localhost kernel: [ 36.058772] dib0700: firmware
started successfully.
May 29 14:06:33 localhost kernel: [ 36.560345] dvb-usb: found a
'Pinnacle Expresscard 320cx' in warm state.
May 29 14:06:33 localhost kernel: [ 36.560485] dvb-usb: will pass the
complete MPEG2 transport stream to the software demuxer.
May 29 14:06:33 localhost kernel: [ 36.560671] DVB: registering new
adapter (Pinnacle Expresscard 320cx)
May 29 14:06:33 localhost kernel: [ 36.803166] usb 2-2: DVB:
registering adapter 0 frontend 0 (DiBcom 7000PC)...
May 29 14:06:33 localhost kernel: [ 36.865296] xc2028 9-0061: creating
new instance
May 29 14:06:33 localhost kernel: [ 36.865300] xc2028 9-0061: type set
to XCeive xc2028/xc3028 tuner
May 29 14:06:33 localhost kernel: [ 36.884811] xc2028 9-0061: Loading
80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
May 29 14:06:33 localhost kernel: [ 36.906762] Registered IR keymap
rc-dib0700-rc5
May 29 14:06:33 localhost kernel: [ 36.907126] input: IR-receiver
inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1a.7/usb2/2-2/rc/rc0/input15
May 29 14:06:33 localhost kernel: [ 36.908238] rc0: IR-receiver inside
an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb2/2-2/rc/rc0
May 29 14:06:33 localhost kernel: [ 36.908411] dvb-usb: schedule
remote query interval to 50 msecs.
May 29 14:06:33 localhost kernel: [ 36.908419] dvb-usb: Pinnacle
Expresscard 320cx successfully initialized and connected.
May 29 14:06:33 localhost kernel: [ 36.908603] usbcore: registered new
interface driver dvb_usb_dib0700
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Pinnacle 320cx -- /dev/video ?
2014-05-29 12:38 Pinnacle 320cx -- /dev/video ? Marek Kozlowski
@ 2014-05-29 13:04 ` Devin Heitmueller
0 siblings, 0 replies; 2+ messages in thread
From: Devin Heitmueller @ 2014-05-29 13:04 UTC (permalink / raw)
To: Marek Kozlowski; +Cc: Linux Media Mailing List
> According to:
> http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_RC
>
> Pinnacle Expresscard 320cx ✔ Yes, in kernel since 2.6.26 2304:022e
> USB2.0 dvb-usb-dib0700-1.20.fw
>
> I've just bought this card and it is correctly recognized and
> initialized, however it doesn't work. Precisely: tvtime and similar
> applications say: `no video device' and no /dev/video0 nor similar
> device files are created. Does the _analog_ part work? Am I missing sth?
There is no Linux support for the analog video capture with the
dib0700 driver. Hence you will only be able to use that device for
digital reception.
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-05-29 13:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-05-29 12:38 Pinnacle 320cx -- /dev/video ? Marek Kozlowski
2014-05-29 13:04 ` Devin Heitmueller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).