* [PATCH] media: vimc: fla: Add virtual flash subdevice
@ 2019-09-01 21:11 Lucas A. M. Magalhães
2019-09-02 12:04 ` Hans Verkuil
0 siblings, 1 reply; 4+ messages in thread
From: Lucas A. M. Magalhães @ 2019-09-01 21:11 UTC (permalink / raw)
To: linux-media
Cc: hverkuil, linux-kernel, helen.koike, edusbarretto,
Lucas A . M . Magalhaes
From: Lucas A. M. Magalhaes <lucmaga@gmail.com>
Add a virtual subdevice to simulate the flash control API.
Those are the supported controls:
v4l2-ctl -d /dev/v4l-subdev6 -L
Flash Controls
led_mode 0x009c0901 (menu) : min=0 max=2 default=0 value=0
0: Off
1: Flash
2: Torch
strobe_source 0x009c0902 (menu) : min=0 max=1 default=0 value=0
0: Software
1: External
strobe 0x009c0903 (button) : flags=write-only, execute-on-write
stop_strobe 0x009c0904 (button) : flags=write-only, execute-on-write
strobe_status 0x009c0905 (bool) : default=0 value=0 flags=read-only
strobe_timeout 0x009c0906 (int) : min=1 max=10 step=1 default=10 value=10
intensity_flash_mode 0x009c0907 (int) : min=0 max=255 step=1 default=255 value=255
intensity_torch_mode 0x009c0908 (int) : min=0 max=255 step=1 default=255 value=255
intensity_indicator 0x009c0909 (int) : min=0 max=255 step=1 default=255 value=255
faults 0x009c090a (bitmask): max=0x00000002 default=0x00000000 value=0x00000000
Co-authored-by: Eduardo Barretto <edusbarretto@gmail.com>
Signed-off-by: Eduardo Barretto <edusbarretto@gmail.com>
Signed-off-by: Lucas A. M. Magalhães <lucmaga@gmail.com>
---
Hi,
This patch depends on the patch series
"Collapse vimc into single monolithic driver" version 3.
I tested it using the v4l2-ctl and the v4l2-compliance. Apparently the compliance
doesn't test any of the standard flash controls. However I got this error:
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
fail: v4l2-test-controls.cpp(830): subscribe event for control 'Flash Controls' failed
Is it really mandatory to implement the event mechanism?
Here is the full output of the v4l2-compliance
root@(none):/# /usr/local/bin/v4l2-compliance -d /dev/v4l-subdev6
v4l2-compliance SHA: b393a5408383b7341883857dfda78537f2f85ef6, 64 bits
Compliance test for vimc device /dev/v4l-subdev6:
Media Driver Info:
Driver name : vimc
Model : VIMC MDEV
Serial :
Bus info : platform:vimc
Media version : 5.3.0
Hardware revision: 0x00000000 (0)
Driver version : 5.3.0
Interface Info:
ID : 0x03000039
Type : V4L Sub-Device
Entity Info:
ID : 0x0000001c (28)
Name : Flash Controller
Function : Flash Controller
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
Allow for multiple opens:
test second /dev/v4l-subdev6 open: OK
test for unlimited opens: OK
Debug ioctls:
[ 342.293254] Flash Controller: ================= START STATUS ================
[ 342.293945] Flash Controller: ================== END STATUS ==================
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
fail: v4l2-test-controls.cpp(830): subscribe event for control 'Flash Controls' failed
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
ontrols: 11 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test VIDIOC_EXPBUF: OK (Not Supported)
test Requests: OK (Not Supported)
Total for vimc device /dev/v4l-subdev6: 41, Succeeded: 40, Failed: 1, Warnings: 0
drivers/media/platform/vimc/Makefile | 2 +-
drivers/media/platform/vimc/vimc-common.c | 2 +
drivers/media/platform/vimc/vimc-common.h | 3 +
drivers/media/platform/vimc/vimc-core.c | 6 +
drivers/media/platform/vimc/vimc-flash.c | 173 ++++++++++++++++++++++
5 files changed, 185 insertions(+), 1 deletion(-)
create mode 100644 drivers/media/platform/vimc/vimc-flash.c
diff --git a/drivers/media/platform/vimc/Makefile b/drivers/media/platform/vimc/Makefile
index a53b2b532e9f..e759bbb04b14 100644
--- a/drivers/media/platform/vimc/Makefile
+++ b/drivers/media/platform/vimc/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
vimc-y := vimc-core.o vimc-common.o vimc-streamer.o vimc-capture.o \
- vimc-debayer.o vimc-scaler.o vimc-sensor.o
+ vimc-debayer.o vimc-scaler.o vimc-sensor.o vimc-flash.o
obj-$(CONFIG_VIDEO_VIMC) += vimc.o
diff --git a/drivers/media/platform/vimc/vimc-common.c b/drivers/media/platform/vimc/vimc-common.c
index a3120f4f7a90..cb786de75573 100644
--- a/drivers/media/platform/vimc/vimc-common.c
+++ b/drivers/media/platform/vimc/vimc-common.c
@@ -203,6 +203,8 @@ struct media_pad *vimc_pads_init(u16 num_pads, const unsigned long *pads_flag)
struct media_pad *pads;
unsigned int i;
+ if (!num_pads)
+ return NULL;
/* Allocate memory for the pads */
pads = kcalloc(num_pads, sizeof(*pads), GFP_KERNEL);
if (!pads)
diff --git a/drivers/media/platform/vimc/vimc-common.h b/drivers/media/platform/vimc/vimc-common.h
index 5b2282de395c..af35169753f1 100644
--- a/drivers/media/platform/vimc/vimc-common.h
+++ b/drivers/media/platform/vimc/vimc-common.h
@@ -159,6 +159,9 @@ void vimc_sca_rm(struct vimc_device *vimc, struct vimc_ent_config *vcfg);
int vimc_sen_add(struct vimc_device *vimc, struct vimc_ent_config *vcfg);
void vimc_sen_rm(struct vimc_device *vimc, struct vimc_ent_config *vcfg);
+int vimc_fla_add(struct vimc_device *vimc, struct vimc_ent_config *vcfg);
+void vimc_fla_rm(struct vimc_device *vimc, struct vimc_ent_config *vcfg);
+
/**
* vimc_pads_init - initialize pads
*
diff --git a/drivers/media/platform/vimc/vimc-core.c b/drivers/media/platform/vimc/vimc-core.c
index 3749bfa88e40..019a52b0d4e6 100644
--- a/drivers/media/platform/vimc/vimc-core.c
+++ b/drivers/media/platform/vimc/vimc-core.c
@@ -100,6 +100,12 @@ static struct vimc_ent_config ent_config[] = {
.add = vimc_cap_add,
.rm = vimc_cap_rm,
},
+ {
+ .name = "Flash Controller",
+ .ved = NULL,
+ .add = vimc_fla_add,
+ .rm = vimc_fla_rm,
+ }
};
static const struct vimc_ent_link ent_links[] = {
diff --git a/drivers/media/platform/vimc/vimc-flash.c b/drivers/media/platform/vimc/vimc-flash.c
new file mode 100644
index 000000000000..ee15fcb4aa8f
--- /dev/null
+++ b/drivers/media/platform/vimc/vimc-flash.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * vimc-flash.c Virtual Media Controller Driver
+ *
+ * Copyright (C) 2019
+ * Contributors: Lucas A. M. Magalhães <lamm@lucmaga.dev>
+ * Eduardo Barretto <edusbarretto@gmail.com>
+ *
+ */
+
+#include <linux/vmalloc.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+
+#include "vimc-common.h"
+
+struct vimc_fla_device {
+ struct vimc_ent_device ved;
+ struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
+ int led_mode;
+ int indicator_intensity;
+ int torch_intensity;
+ int brightness;
+};
+
+static int vimc_fla_g_volatile_ctrl(struct v4l2_ctrl *c)
+{
+ struct vimc_fla_device *vfla =
+ container_of(c->handler, struct vimc_fla_device, hdl);
+
+ switch (c->id) {
+ case V4L2_CID_FLASH_TORCH_INTENSITY:
+ return vfla->torch_intensity;
+ case V4L2_CID_FLASH_INDICATOR_INTENSITY:
+ return vfla->indicator_intensity;
+ case V4L2_CID_FLASH_INTENSITY:
+ return vfla->brightness;
+ case V4L2_CID_FLASH_STROBE_STATUS:
+ case V4L2_CID_FLASH_FAULT:
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+/* Flash Controls */
+static const struct v4l2_ctrl_config vimc_fla_ctrl_class = {
+ .flags = V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY,
+ .id = VIMC_CID_VIMC_CLASS,
+ .name = "VIMC Flash Controls",
+ .type = V4L2_CTRL_TYPE_CTRL_CLASS,
+};
+
+static int vimc_fla_s_ctrl(struct v4l2_ctrl *c)
+{
+ struct vimc_fla_device *vfla =
+ container_of(c->handler, struct vimc_fla_device, hdl);
+
+ switch (c->id) {
+ case V4L2_CID_FLASH_LED_MODE:
+ vfla->led_mode = c->val;
+ return 0;
+ case V4L2_CID_FLASH_STROBE_SOURCE:
+ return 0;
+ case V4L2_CID_FLASH_STROBE:
+ return 0;
+ case V4L2_CID_FLASH_STROBE_STOP:
+ return 0;
+ case V4L2_CID_FLASH_TIMEOUT:
+ return 0;
+ case V4L2_CID_FLASH_INTENSITY:
+ vfla->brightness = c->val;
+ return 0;
+ case V4L2_CID_FLASH_TORCH_INTENSITY:
+ vfla->torch_intensity = c->val;
+ return 0;
+ case V4L2_CID_FLASH_INDICATOR_INTENSITY:
+ vfla->indicator_intensity = c->val;
+ return 0;
+ }
+ return 0;
+}
+
+static const struct v4l2_ctrl_ops vimc_fla_ctrl_ops = {
+ .g_volatile_ctrl = vimc_fla_g_volatile_ctrl,
+ .s_ctrl = vimc_fla_s_ctrl,
+};
+
+/* initialize device */
+static const struct v4l2_subdev_ops vimc_fla_ops = {
+ .core = NULL,
+};
+
+int vimc_fla_add(struct vimc_device *vimc, struct vimc_ent_config *vcfg)
+{
+ struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
+ struct vimc_fla_device *vfla;
+ int ret;
+
+ /* Allocate the vfla struct */
+ vfla = kzalloc(sizeof(*vfla), GFP_KERNEL);
+ if (!vfla)
+ return -ENOMEM;
+
+ v4l2_ctrl_handler_init(&vfla->hdl, 4);
+
+ v4l2_ctrl_new_std_menu(&vfla->hdl, &vimc_fla_ctrl_ops,
+ V4L2_CID_FLASH_LED_MODE,
+ V4L2_FLASH_LED_MODE_TORCH, ~0x7,
+ V4L2_FLASH_LED_MODE_NONE);
+ v4l2_ctrl_new_std_menu(&vfla->hdl, &vimc_fla_ctrl_ops,
+ V4L2_CID_FLASH_STROBE_SOURCE, 0x1, ~0x3,
+ V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
+ v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
+ V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
+ v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
+ V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
+ v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
+ V4L2_CID_FLASH_TIMEOUT, 1, 10, 1, 10);
+ v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
+ V4L2_CID_FLASH_TORCH_INTENSITY, 0, 255, 1, 255);
+ v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
+ V4L2_CID_FLASH_INTENSITY, 0, 255, 1, 255);
+ v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
+ V4L2_CID_FLASH_INDICATOR_INTENSITY, 0, 255, 1, 255);
+ v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
+ V4L2_CID_FLASH_STROBE_STATUS, 0, 0, 0, 0);
+ v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
+ V4L2_CID_FLASH_FAULT, 0,
+ V4L2_FLASH_FAULT_TIMEOUT, 0, 0);
+ vfla->sd.ctrl_handler = &vfla->hdl;
+ if (vfla->hdl.error) {
+ ret = vfla->hdl.error;
+ goto err_free_vfla;
+ }
+
+ /* Initialize ved and sd */
+ ret = vimc_ent_sd_register(&vfla->ved, &vfla->sd, v4l2_dev,
+ vcfg->name,
+ MEDIA_ENT_F_FLASH, 0, NULL,
+ NULL, &vimc_fla_ops);
+ if (ret)
+ goto err_free_hdl;
+
+ /* Initialize standard values */
+ vfla->indicator_intensity = 0;
+ vfla->torch_intensity = 0;
+ vfla->brightness = 0;
+ vfla->led_mode = V4L2_FLASH_LED_MODE_NONE;
+
+ vcfg->ved = &vfla->ved;
+ return 0;
+
+err_free_hdl:
+ v4l2_ctrl_handler_free(&vfla->hdl);
+err_free_vfla:
+ kfree(vfla);
+
+ return ret;
+}
+
+void vimc_fla_rm(struct vimc_device *vimc, struct vimc_ent_config *vcfg)
+{
+ struct vimc_ent_device *ved = vcfg->ved;
+ struct vimc_fla_device *vfla;
+
+ if (!ved)
+ return;
+
+ vfla = container_of(ved, struct vimc_fla_device, ved);
+ vimc_ent_sd_unregister(ved, &vfla->sd);
+}
--
2.23.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] media: vimc: fla: Add virtual flash subdevice
2019-09-01 21:11 [PATCH] media: vimc: fla: Add virtual flash subdevice Lucas A. M. Magalhães
@ 2019-09-02 12:04 ` Hans Verkuil
2019-09-09 23:00 ` Lucas Magalhães
0 siblings, 1 reply; 4+ messages in thread
From: Hans Verkuil @ 2019-09-02 12:04 UTC (permalink / raw)
To: Lucas A. M. Magalhães, linux-media
Cc: linux-kernel, helen.koike, edusbarretto
Hi Lucas, Eduardo,
Thank you for the patch!
Some comments below:
On 9/1/19 11:11 PM, Lucas A. M. Magalhães wrote:
> From: Lucas A. M. Magalhaes <lucmaga@gmail.com>
>
> Add a virtual subdevice to simulate the flash control API.
> Those are the supported controls:
> v4l2-ctl -d /dev/v4l-subdev6 -L
> Flash Controls
>
> led_mode 0x009c0901 (menu) : min=0 max=2 default=0 value=0
> 0: Off
> 1: Flash
> 2: Torch
> strobe_source 0x009c0902 (menu) : min=0 max=1 default=0 value=0
> 0: Software
> 1: External
> strobe 0x009c0903 (button) : flags=write-only, execute-on-write
> stop_strobe 0x009c0904 (button) : flags=write-only, execute-on-write
> strobe_status 0x009c0905 (bool) : default=0 value=0 flags=read-only
> strobe_timeout 0x009c0906 (int) : min=1 max=10 step=1 default=10 value=10
> intensity_flash_mode 0x009c0907 (int) : min=0 max=255 step=1 default=255 value=255
> intensity_torch_mode 0x009c0908 (int) : min=0 max=255 step=1 default=255 value=255
> intensity_indicator 0x009c0909 (int) : min=0 max=255 step=1 default=255 value=255
> faults 0x009c090a (bitmask): max=0x00000002 default=0x00000000 value=0x00000000
>
> Co-authored-by: Eduardo Barretto <edusbarretto@gmail.com>
> Signed-off-by: Eduardo Barretto <edusbarretto@gmail.com>
> Signed-off-by: Lucas A. M. Magalhães <lucmaga@gmail.com>
>
> ---
> Hi,
>
> This patch depends on the patch series
> "Collapse vimc into single monolithic driver" version 3.
>
> I tested it using the v4l2-ctl and the v4l2-compliance. Apparently the compliance
> doesn't test any of the standard flash controls. However I got this error:
>
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> fail: v4l2-test-controls.cpp(830): subscribe event for control 'Flash Controls' failed
>
> Is it really mandatory to implement the event mechanism?
>
> Here is the full output of the v4l2-compliance
>
> root@(none):/# /usr/local/bin/v4l2-compliance -d /dev/v4l-subdev6
> v4l2-compliance SHA: b393a5408383b7341883857dfda78537f2f85ef6, 64 bits
>
> Compliance test for vimc device /dev/v4l-subdev6:
>
> Media Driver Info:
> Driver name : vimc
> Model : VIMC MDEV
> Serial :
> Bus info : platform:vimc
> Media version : 5.3.0
> Hardware revision: 0x00000000 (0)
> Driver version : 5.3.0
> Interface Info:
> ID : 0x03000039
> Type : V4L Sub-Device
> Entity Info:
> ID : 0x0000001c (28)
> Name : Flash Controller
> Function : Flash Controller
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
>
> Allow for multiple opens:
> test second /dev/v4l-subdev6 open: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> [ 342.293254] Flash Controller: ================= START STATUS ================
> [ 342.293945] Flash Controller: ================== END STATUS ==================
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> fail: v4l2-test-controls.cpp(830): subscribe event for control 'Flash Controls' failed
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>
> ontrols: 11 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK (Not Supported)
> test VIDIOC_TRY_FMT: OK (Not Supported)
> test VIDIOC_S_FMT: OK (Not Supported)
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> test VIDIOC_EXPBUF: OK (Not Supported)
> test Requests: OK (Not Supported)
>
> Total for vimc device /dev/v4l-subdev6: 41, Succeeded: 40, Failed: 1, Warnings: 0
>
> drivers/media/platform/vimc/Makefile | 2 +-
> drivers/media/platform/vimc/vimc-common.c | 2 +
> drivers/media/platform/vimc/vimc-common.h | 3 +
> drivers/media/platform/vimc/vimc-core.c | 6 +
> drivers/media/platform/vimc/vimc-flash.c | 173 ++++++++++++++++++++++
> 5 files changed, 185 insertions(+), 1 deletion(-)
> create mode 100644 drivers/media/platform/vimc/vimc-flash.c
>
> diff --git a/drivers/media/platform/vimc/Makefile b/drivers/media/platform/vimc/Makefile
> index a53b2b532e9f..e759bbb04b14 100644
> --- a/drivers/media/platform/vimc/Makefile
> +++ b/drivers/media/platform/vimc/Makefile
> @@ -1,6 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0
> vimc-y := vimc-core.o vimc-common.o vimc-streamer.o vimc-capture.o \
> - vimc-debayer.o vimc-scaler.o vimc-sensor.o
> + vimc-debayer.o vimc-scaler.o vimc-sensor.o vimc-flash.o
>
> obj-$(CONFIG_VIDEO_VIMC) += vimc.o
>
> diff --git a/drivers/media/platform/vimc/vimc-common.c b/drivers/media/platform/vimc/vimc-common.c
> index a3120f4f7a90..cb786de75573 100644
> --- a/drivers/media/platform/vimc/vimc-common.c
> +++ b/drivers/media/platform/vimc/vimc-common.c
> @@ -203,6 +203,8 @@ struct media_pad *vimc_pads_init(u16 num_pads, const unsigned long *pads_flag)
> struct media_pad *pads;
> unsigned int i;
>
> + if (!num_pads)
> + return NULL;
> /* Allocate memory for the pads */
> pads = kcalloc(num_pads, sizeof(*pads), GFP_KERNEL);
> if (!pads)
> diff --git a/drivers/media/platform/vimc/vimc-common.h b/drivers/media/platform/vimc/vimc-common.h
> index 5b2282de395c..af35169753f1 100644
> --- a/drivers/media/platform/vimc/vimc-common.h
> +++ b/drivers/media/platform/vimc/vimc-common.h
> @@ -159,6 +159,9 @@ void vimc_sca_rm(struct vimc_device *vimc, struct vimc_ent_config *vcfg);
> int vimc_sen_add(struct vimc_device *vimc, struct vimc_ent_config *vcfg);
> void vimc_sen_rm(struct vimc_device *vimc, struct vimc_ent_config *vcfg);
>
> +int vimc_fla_add(struct vimc_device *vimc, struct vimc_ent_config *vcfg);
> +void vimc_fla_rm(struct vimc_device *vimc, struct vimc_ent_config *vcfg);
> +
> /**
> * vimc_pads_init - initialize pads
> *
> diff --git a/drivers/media/platform/vimc/vimc-core.c b/drivers/media/platform/vimc/vimc-core.c
> index 3749bfa88e40..019a52b0d4e6 100644
> --- a/drivers/media/platform/vimc/vimc-core.c
> +++ b/drivers/media/platform/vimc/vimc-core.c
> @@ -100,6 +100,12 @@ static struct vimc_ent_config ent_config[] = {
> .add = vimc_cap_add,
> .rm = vimc_cap_rm,
> },
> + {
> + .name = "Flash Controller",
> + .ved = NULL,
> + .add = vimc_fla_add,
> + .rm = vimc_fla_rm,
> + }
> };
>
> static const struct vimc_ent_link ent_links[] = {
> diff --git a/drivers/media/platform/vimc/vimc-flash.c b/drivers/media/platform/vimc/vimc-flash.c
> new file mode 100644
> index 000000000000..ee15fcb4aa8f
> --- /dev/null
> +++ b/drivers/media/platform/vimc/vimc-flash.c
> @@ -0,0 +1,173 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * vimc-flash.c Virtual Media Controller Driver
> + *
> + * Copyright (C) 2019
> + * Contributors: Lucas A. M. Magalhães <lamm@lucmaga.dev>
> + * Eduardo Barretto <edusbarretto@gmail.com>
> + *
> + */
> +
> +#include <linux/vmalloc.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-subdev.h>
> +
> +#include "vimc-common.h"
> +
> +struct vimc_fla_device {
> + struct vimc_ent_device ved;
> + struct v4l2_subdev sd;
> + struct v4l2_ctrl_handler hdl;
> + int led_mode;
> + int indicator_intensity;
> + int torch_intensity;
> + int brightness;
Please call this flash_intensity or something like that. 'brightness'
is confusing since that's the name used for the CID_USER_BRIGHTNESS
control.
> +};
> +
> +static int vimc_fla_g_volatile_ctrl(struct v4l2_ctrl *c)
> +{
> + struct vimc_fla_device *vfla =
> + container_of(c->handler, struct vimc_fla_device, hdl);
> +
> + switch (c->id) {
> + case V4L2_CID_FLASH_TORCH_INTENSITY:
> + return vfla->torch_intensity;
> + case V4L2_CID_FLASH_INDICATOR_INTENSITY:
> + return vfla->indicator_intensity;
> + case V4L2_CID_FLASH_INTENSITY:
> + return vfla->brightness;
> + case V4L2_CID_FLASH_STROBE_STATUS:
> + case V4L2_CID_FLASH_FAULT:
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
Just drop this function. None of the controls are volatile, so by default
the control framework just returns the last set value, which is what you do
here.
> +
> +/* Flash Controls */
> +static const struct v4l2_ctrl_config vimc_fla_ctrl_class = {
> + .flags = V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY,
> + .id = VIMC_CID_VIMC_CLASS,
> + .name = "VIMC Flash Controls",
> + .type = V4L2_CTRL_TYPE_CTRL_CLASS,
> +};
Huh? Just drop this, this duplicates V4L2_CID_FLASH_CLASS which is added
automatically.
> +
> +static int vimc_fla_s_ctrl(struct v4l2_ctrl *c)
> +{
> + struct vimc_fla_device *vfla =
> + container_of(c->handler, struct vimc_fla_device, hdl);
> +
> + switch (c->id) {
> + case V4L2_CID_FLASH_LED_MODE:
> + vfla->led_mode = c->val;
> + return 0;
> + case V4L2_CID_FLASH_STROBE_SOURCE:
> + return 0;
> + case V4L2_CID_FLASH_STROBE:
> + return 0;
> + case V4L2_CID_FLASH_STROBE_STOP:
> + return 0;
> + case V4L2_CID_FLASH_TIMEOUT:
> + return 0;
> + case V4L2_CID_FLASH_INTENSITY:
> + vfla->brightness = c->val;
> + return 0;
> + case V4L2_CID_FLASH_TORCH_INTENSITY:
> + vfla->torch_intensity = c->val;
> + return 0;
> + case V4L2_CID_FLASH_INDICATOR_INTENSITY:
> + vfla->indicator_intensity = c->val;
> + return 0;
> + }
> + return 0;
> +}
> +
> +static const struct v4l2_ctrl_ops vimc_fla_ctrl_ops = {
> + .g_volatile_ctrl = vimc_fla_g_volatile_ctrl,
> + .s_ctrl = vimc_fla_s_ctrl,
> +};
> +
> +/* initialize device */
> +static const struct v4l2_subdev_ops vimc_fla_ops = {
> + .core = NULL,
> +};
You do need core events:
static const struct v4l2_subdev_core_ops vimc_fla_core_ops = {
.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
};
The reason for the compliance fail is that this is missing.
> +
> +int vimc_fla_add(struct vimc_device *vimc, struct vimc_ent_config *vcfg)
> +{
> + struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
> + struct vimc_fla_device *vfla;
> + int ret;
> +
> + /* Allocate the vfla struct */
> + vfla = kzalloc(sizeof(*vfla), GFP_KERNEL);
> + if (!vfla)
> + return -ENOMEM;
> +
> + v4l2_ctrl_handler_init(&vfla->hdl, 4);
> +
> + v4l2_ctrl_new_std_menu(&vfla->hdl, &vimc_fla_ctrl_ops,
> + V4L2_CID_FLASH_LED_MODE,
> + V4L2_FLASH_LED_MODE_TORCH, ~0x7,
> + V4L2_FLASH_LED_MODE_NONE);
> + v4l2_ctrl_new_std_menu(&vfla->hdl, &vimc_fla_ctrl_ops,
> + V4L2_CID_FLASH_STROBE_SOURCE, 0x1, ~0x3,
> + V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
> + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
> + V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
> + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
> + V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
> + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
> + V4L2_CID_FLASH_TIMEOUT, 1, 10, 1, 10);
> + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
> + V4L2_CID_FLASH_TORCH_INTENSITY, 0, 255, 1, 255);
> + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
> + V4L2_CID_FLASH_INTENSITY, 0, 255, 1, 255);
> + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
> + V4L2_CID_FLASH_INDICATOR_INTENSITY, 0, 255, 1, 255);
> + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
> + V4L2_CID_FLASH_STROBE_STATUS, 0, 0, 0, 0);
It would be nice if this would actually reflect the actual strobe status.
There are more things that can be done to make this a more realistic module,
e.g. STROBE_FLASH can only be set if V4L2_CID_FLASH_LED_MODE is set to
V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE is set to
V4L2_FLASH_STROBE_SOURCE_SOFTWARE.
Regards,
Hans
> + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
> + V4L2_CID_FLASH_FAULT, 0,
> + V4L2_FLASH_FAULT_TIMEOUT, 0, 0);
> + vfla->sd.ctrl_handler = &vfla->hdl;
> + if (vfla->hdl.error) {
> + ret = vfla->hdl.error;
> + goto err_free_vfla;
> + }
> +
> + /* Initialize ved and sd */
> + ret = vimc_ent_sd_register(&vfla->ved, &vfla->sd, v4l2_dev,
> + vcfg->name,
> + MEDIA_ENT_F_FLASH, 0, NULL,
> + NULL, &vimc_fla_ops);
> + if (ret)
> + goto err_free_hdl;
> +
> + /* Initialize standard values */
> + vfla->indicator_intensity = 0;
> + vfla->torch_intensity = 0;
> + vfla->brightness = 0;
> + vfla->led_mode = V4L2_FLASH_LED_MODE_NONE;
> +
> + vcfg->ved = &vfla->ved;
> + return 0;
> +
> +err_free_hdl:
> + v4l2_ctrl_handler_free(&vfla->hdl);
> +err_free_vfla:
> + kfree(vfla);
> +
> + return ret;
> +}
> +
> +void vimc_fla_rm(struct vimc_device *vimc, struct vimc_ent_config *vcfg)
> +{
> + struct vimc_ent_device *ved = vcfg->ved;
> + struct vimc_fla_device *vfla;
> +
> + if (!ved)
> + return;
> +
> + vfla = container_of(ved, struct vimc_fla_device, ved);
> + vimc_ent_sd_unregister(ved, &vfla->sd);
> +}
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] media: vimc: fla: Add virtual flash subdevice
2019-09-02 12:04 ` Hans Verkuil
@ 2019-09-09 23:00 ` Lucas Magalhães
2019-09-10 6:57 ` Hans Verkuil
0 siblings, 1 reply; 4+ messages in thread
From: Lucas Magalhães @ 2019-09-09 23:00 UTC (permalink / raw)
To: Hans Verkuil; +Cc: linux-media, linux-kernel, Helen Koike, edusbarretto
Hi Hans,
Thanks for the review. I fixed most of the issues you found. Just have
the question below.
On Mon, Sep 2, 2019 at 9:04 AM Hans Verkuil <hverkuil@xs4all.nl> wrote:
>
> > +
> > +int vimc_fla_add(struct vimc_device *vimc, struct vimc_ent_config *vcfg)
> > +{
> > + struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
> > + struct vimc_fla_device *vfla;
> > + int ret;
> > +
> > + /* Allocate the vfla struct */
> > + vfla = kzalloc(sizeof(*vfla), GFP_KERNEL);
> > + if (!vfla)
> > + return -ENOMEM;
> > +
> > + v4l2_ctrl_handler_init(&vfla->hdl, 4);
> > +
> > + v4l2_ctrl_new_std_menu(&vfla->hdl, &vimc_fla_ctrl_ops,
> > + V4L2_CID_FLASH_LED_MODE,
> > + V4L2_FLASH_LED_MODE_TORCH, ~0x7,
> > + V4L2_FLASH_LED_MODE_NONE);
> > + v4l2_ctrl_new_std_menu(&vfla->hdl, &vimc_fla_ctrl_ops,
> > + V4L2_CID_FLASH_STROBE_SOURCE, 0x1, ~0x3,
> > + V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
> > + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
> > + V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
> > + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
> > + V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
> > + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
> > + V4L2_CID_FLASH_TIMEOUT, 1, 10, 1, 10);
> > + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
> > + V4L2_CID_FLASH_TORCH_INTENSITY, 0, 255, 1, 255);
> > + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
> > + V4L2_CID_FLASH_INTENSITY, 0, 255, 1, 255);
> > + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
> > + V4L2_CID_FLASH_INDICATOR_INTENSITY, 0, 255, 1, 255);
> > + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
> > + V4L2_CID_FLASH_STROBE_STATUS, 0, 0, 0, 0);
>
> It would be nice if this would actually reflect the actual strobe status.
>
Regarding the strobe status I was reading the code and find out that
V4L2_CID_FLASH_STROBE_STATUS is a V4L2_CTRL_FLAG_READ_ONLY
but it's not a V4L2_CTRL_FLAG_VOLATILE. I found this intriguing. How an
I suppose to get it if its not volatile? As I understood it changes over time
if the strobe starts and the timeout expire, isn't it? Shouldn't it be volatile
if so?
I've already made a simple implementation were V4L2_CID_FLASH_STROBE_STATUS
returns after calling V4L2_CID_FLASH_STROBE and becomes false after the timeout
time passes.
Thanks!
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] media: vimc: fla: Add virtual flash subdevice
2019-09-09 23:00 ` Lucas Magalhães
@ 2019-09-10 6:57 ` Hans Verkuil
0 siblings, 0 replies; 4+ messages in thread
From: Hans Verkuil @ 2019-09-10 6:57 UTC (permalink / raw)
To: Lucas Magalhães; +Cc: linux-media, linux-kernel, Helen Koike, edusbarretto
On 9/10/19 1:00 AM, Lucas Magalhães wrote:
> Hi Hans,
> Thanks for the review. I fixed most of the issues you found. Just have
> the question below.
>
> On Mon, Sep 2, 2019 at 9:04 AM Hans Verkuil <hverkuil@xs4all.nl> wrote:
>>
>>> +
>>> +int vimc_fla_add(struct vimc_device *vimc, struct vimc_ent_config *vcfg)
>>> +{
>>> + struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
>>> + struct vimc_fla_device *vfla;
>>> + int ret;
>>> +
>>> + /* Allocate the vfla struct */
>>> + vfla = kzalloc(sizeof(*vfla), GFP_KERNEL);
>>> + if (!vfla)
>>> + return -ENOMEM;
>>> +
>>> + v4l2_ctrl_handler_init(&vfla->hdl, 4);
>>> +
>>> + v4l2_ctrl_new_std_menu(&vfla->hdl, &vimc_fla_ctrl_ops,
>>> + V4L2_CID_FLASH_LED_MODE,
>>> + V4L2_FLASH_LED_MODE_TORCH, ~0x7,
>>> + V4L2_FLASH_LED_MODE_NONE);
>>> + v4l2_ctrl_new_std_menu(&vfla->hdl, &vimc_fla_ctrl_ops,
>>> + V4L2_CID_FLASH_STROBE_SOURCE, 0x1, ~0x3,
>>> + V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
>>> + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
>>> + V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
>>> + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
>>> + V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
>>> + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
>>> + V4L2_CID_FLASH_TIMEOUT, 1, 10, 1, 10);
>>> + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
>>> + V4L2_CID_FLASH_TORCH_INTENSITY, 0, 255, 1, 255);
>>> + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
>>> + V4L2_CID_FLASH_INTENSITY, 0, 255, 1, 255);
>>> + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
>>> + V4L2_CID_FLASH_INDICATOR_INTENSITY, 0, 255, 1, 255);
>>> + v4l2_ctrl_new_std(&vfla->hdl, &vimc_fla_ctrl_ops,
>>> + V4L2_CID_FLASH_STROBE_STATUS, 0, 0, 0, 0);
>>
>> It would be nice if this would actually reflect the actual strobe status.
>>
> Regarding the strobe status I was reading the code and find out that
> V4L2_CID_FLASH_STROBE_STATUS is a V4L2_CTRL_FLAG_READ_ONLY
> but it's not a V4L2_CTRL_FLAG_VOLATILE. I found this intriguing. How an
> I suppose to get it if its not volatile? As I understood it changes over time
> if the strobe starts and the timeout expire, isn't it? Shouldn't it be volatile
> if so?
A non-volatile read-only control is set deterministically by the the driver.
So the driver calls v4l2_ctrl_s_ctrl() to change the controls value.
A volatile read-only control is one where the value is read from a hardware
register that is continuously changing. E.g. if autogain is on, then the gain
register in a device contains the currently calculated gain, but that might be
changed the next time the register is read.
Regards,
Hans
>
> I've already made a simple implementation were V4L2_CID_FLASH_STROBE_STATUS
> returns after calling V4L2_CID_FLASH_STROBE and becomes false after the timeout
> time passes.
>
> Thanks!
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-09-10 6:57 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-01 21:11 [PATCH] media: vimc: fla: Add virtual flash subdevice Lucas A. M. Magalhães
2019-09-02 12:04 ` Hans Verkuil
2019-09-09 23:00 ` Lucas Magalhães
2019-09-10 6:57 ` Hans Verkuil
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).