Re: Linux Kernel 5.2.8 (uvc or i915?)

linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* Re: Linux Kernel 5.2.8 (uvc or i915?)
       [not found] <CAONH+Jm-O6=DQ+K2n5pNTNMg2Sq1KcVNFLuweVh6W82OPEFJoQ@mail.gmail.com>
@ 2019-08-16  1:53 ` Randy Dunlap
       [not found]   ` <CAONH+JnZpbpdiwdajP7ke7X7wQGU7m4YoyZRDbLHKmRufkD6mQ@mail.gmail.com>
  2019-08-16 13:47   ` [Intel-gfx] Linux Kernel 5.2.8 (uvc or i915?) Jani Nikula
  0 siblings, 2 replies; 7+ messages in thread
From: Randy Dunlap @ 2019-08-16  1:53 UTC (permalink / raw)
  To: Nathaniel Russell, linux-kernel, dri-devel, intel-gfx
  Cc: Laurent Pinchart, linux-media

On 8/15/19 6:15 PM, Nathaniel Russell wrote:
> I would really like help with the kernel error with my uvcvideo driver.
> 

Hi again.

What makes you think that the problem is related to the uvcvideo driver?
Does some previous kernel version work correctly?  If so, what version(s)?

Does this warning message only happen when the uvcvideo driver is being loaded?
Can you suppress loading of the uvcvideo driver to find out?

Most of the problems/errors/warnings that I see are related to the i915 driver:

[   13.032341] timed out waiting for port C ready: got 0x20, expected 0xe0
[   13.032872] WARNING: CPU: 1 PID: 239 at drivers/gpu/drm/i915/intel_display.c:1597 vlv_wait_port_ready+0x99/0xe0 [i915]
[   13.033632] RIP: 0010:vlv_wait_port_ready+0x99/0xe0 [i915]

although there are a few uvcvideo warnings:
[   13.039305] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[   13.039318] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[   13.039330] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[   13.039339] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!

Laurent, do you see any uvc issues here?  Any ideas/suggestions?

@intel-gfx:  any ideas about what is going on here with the i915 driver?

Original message to lkml:
https://lore.kernel.org/lkml/CAONH+Jm-O6=DQ+K2n5pNTNMg2Sq1KcVNFLuweVh6W82OPEFJoQ@mail.gmail.com/T/#u

Previous message for 5.1.21 kernel:
https://lore.kernel.org/lkml/CAONH+JkTFujY9vEyNNuem+9rJ2qBKkf-PbKk9=DBSVEp6kW=yw@mail.gmail.com/

thanks.
-- 
~Randy

^ permalink raw reply	[flat|nested] 7+ messages in thread

[parent not found: <CAONH+JnZpbpdiwdajP7ke7X7wQGU7m4YoyZRDbLHKmRufkD6mQ@mail.gmail.com>]

* Re: Linux Kernel 5.2.8 (uvc or i915? <<<)
       [not found]   ` <CAONH+JnZpbpdiwdajP7ke7X7wQGU7m4YoyZRDbLHKmRufkD6mQ@mail.gmail.com>
@ 2019-08-16  3:10     ` Randy Dunlap
  2019-08-16  9:58       ` Laurent Pinchart
  0 siblings, 1 reply; 7+ messages in thread
From: Randy Dunlap @ 2019-08-16  3:10 UTC (permalink / raw)
  Cc: Nathaniel Russell, LKML, linux-media, Laurent Pinchart,
	dri-devel, intel-gfx

[adding mailing lists etc. with Nathaniel's test info]


On 8/15/19 7:21 PM, Nathaniel Russell wrote:
> Well i surpressed the uvcvideo driver and you are right Randy it
> definitely is not the uvcvideo driver. There is something going on in
> the i915 driver.
> 
> 
> On 8/15/19, Randy Dunlap <rdunlap@infradead.org> wrote:
>> On 8/15/19 6:15 PM, Nathaniel Russell wrote:
>>> I would really like help with the kernel error with my uvcvideo driver.
>>>
>>
>> Hi again.
>>
>> What makes you think that the problem is related to the uvcvideo driver?
>> Does some previous kernel version work correctly?  If so, what version(s)?
>>
>>
>> Does this warning message only happen when the uvcvideo driver is being
>> loaded?
>> Can you suppress loading of the uvcvideo driver to find out?
>>
>> Most of the problems/errors/warnings that I see are related to the i915
>> driver:
>>
>> [   13.032341] timed out waiting for port C ready: got 0x20, expected 0xe0
>> [   13.032872] WARNING: CPU: 1 PID: 239 at
>> drivers/gpu/drm/i915/intel_display.c:1597 vlv_wait_port_ready+0x99/0xe0
>> [i915]
>> [   13.033632] RIP: 0010:vlv_wait_port_ready+0x99/0xe0 [i915]
>>
>> although there are a few uvcvideo warnings:
>> [   13.039305] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not
>> initialized!
>> [   13.039318] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not
>> initialized!
>> [   13.039330] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not
>> initialized!
>> [   13.039339] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not
>> initialized!
>>
>>
>> Laurent, do you see any uvc issues here?  Any ideas/suggestions?
>>
>>
>> @intel-gfx:  any ideas about what is going on here with the i915 driver?
>>
>>
>>
>> Original message to lkml:
>> https://lore.kernel.org/lkml/CAONH+Jm-O6=DQ+K2n5pNTNMg2Sq1KcVNFLuweVh6W82OPEFJoQ@mail.gmail.com/T/#u
>>
>> Previous message for 5.1.21 kernel:
>> https://lore.kernel.org/lkml/CAONH+JkTFujY9vEyNNuem+9rJ2qBKkf-PbKk9=DBSVEp6kW=yw@mail.gmail.com/
>>
>>
>> thanks.
>> --
>> ~Randy
>>


-- 
~Randy

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Linux Kernel 5.2.8 (uvc or i915? <<<)
  2019-08-16  3:10     ` Linux Kernel 5.2.8 (uvc or i915? <<<) Randy Dunlap
@ 2019-08-16  9:58       ` Laurent Pinchart
  2019-08-16 21:35         ` Nathaniel Russell
  0 siblings, 1 reply; 7+ messages in thread
From: Laurent Pinchart @ 2019-08-16  9:58 UTC (permalink / raw)
  To: Randy Dunlap; +Cc: Nathaniel Russell, LKML, linux-media, dri-devel, intel-gfx

Hi Randy,

On Thu, Aug 15, 2019 at 08:10:03PM -0700, Randy Dunlap wrote:
> [adding mailing lists etc. with Nathaniel's test info]
> 
> On 8/15/19 7:21 PM, Nathaniel Russell wrote:
> > Well i surpressed the uvcvideo driver and you are right Randy it
> > definitely is not the uvcvideo driver. There is something going on in
> > the i915 driver.
> > 
> > On 8/15/19, Randy Dunlap <rdunlap@infradead.org> wrote:
> >> On 8/15/19 6:15 PM, Nathaniel Russell wrote:
> >>> I would really like help with the kernel error with my uvcvideo driver.
> >>
> >> Hi again.
> >>
> >> What makes you think that the problem is related to the uvcvideo driver?
> >> Does some previous kernel version work correctly?  If so, what version(s)?
> >>
> >>
> >> Does this warning message only happen when the uvcvideo driver is being
> >> loaded?
> >> Can you suppress loading of the uvcvideo driver to find out?
> >>
> >> Most of the problems/errors/warnings that I see are related to the i915
> >> driver:
> >>
> >> [   13.032341] timed out waiting for port C ready: got 0x20, expected 0xe0
> >> [   13.032872] WARNING: CPU: 1 PID: 239 at
> >> drivers/gpu/drm/i915/intel_display.c:1597 vlv_wait_port_ready+0x99/0xe0
> >> [i915]
> >> [   13.033632] RIP: 0010:vlv_wait_port_ready+0x99/0xe0 [i915]
> >>
> >> although there are a few uvcvideo warnings:
> >> [   13.039305] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not
> >> initialized!
> >> [   13.039318] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not
> >> initialized!
> >> [   13.039330] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not
> >> initialized!
> >> [   13.039339] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not
> >> initialized!
> >>
> >> Laurent, do you see any uvc issues here?  Any ideas/suggestions?

No, uvcvideo seems completely reunlated.

> >> @intel-gfx:  any ideas about what is going on here with the i915 driver?
> >>
> >> Original message to lkml:
> >> https://lore.kernel.org/lkml/CAONH+Jm-O6=DQ+K2n5pNTNMg2Sq1KcVNFLuweVh6W82OPEFJoQ@mail.gmail.com/T/#u
> >>
> >> Previous message for 5.1.21 kernel:
> >> https://lore.kernel.org/lkml/CAONH+JkTFujY9vEyNNuem+9rJ2qBKkf-PbKk9=DBSVEp6kW=yw@mail.gmail.com/

-- 
Regards,

Laurent Pinchart

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Linux Kernel 5.2.8 (uvc or i915? <<<)
  2019-08-16  9:58       ` Laurent Pinchart
@ 2019-08-16 21:35         ` Nathaniel Russell
  0 siblings, 0 replies; 7+ messages in thread
From: Nathaniel Russell @ 2019-08-16 21:35 UTC (permalink / raw)
  To: Laurent Pinchart; +Cc: Randy Dunlap, LKML, linux-media, dri-devel, intel-gfx

[-- Attachment #1: Type: text/plain, Size: 2506 bytes --]

Kernel is the dmesg from the kernel I run on a daily basis.

On 8/16/19, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote:
> Hi Randy,
>
> On Thu, Aug 15, 2019 at 08:10:03PM -0700, Randy Dunlap wrote:
>> [adding mailing lists etc. with Nathaniel's test info]
>>
>> On 8/15/19 7:21 PM, Nathaniel Russell wrote:
>> > Well i surpressed the uvcvideo driver and you are right Randy it
>> > definitely is not the uvcvideo driver. There is something going on in
>> > the i915 driver.
>> >
>> > On 8/15/19, Randy Dunlap <rdunlap@infradead.org> wrote:
>> >> On 8/15/19 6:15 PM, Nathaniel Russell wrote:
>> >>> I would really like help with the kernel error with my uvcvideo
>> >>> driver.
>> >>
>> >> Hi again.
>> >>
>> >> What makes you think that the problem is related to the uvcvideo
>> >> driver?
>> >> Does some previous kernel version work correctly?  If so, what
>> >> version(s)?
>> >>
>> >>
>> >> Does this warning message only happen when the uvcvideo driver is
>> >> being
>> >> loaded?
>> >> Can you suppress loading of the uvcvideo driver to find out?
>> >>
>> >> Most of the problems/errors/warnings that I see are related to the
>> >> i915
>> >> driver:
>> >>
>> >> [   13.032341] timed out waiting for port C ready: got 0x20, expected
>> >> 0xe0
>> >> [   13.032872] WARNING: CPU: 1 PID: 239 at
>> >> drivers/gpu/drm/i915/intel_display.c:1597
>> >> vlv_wait_port_ready+0x99/0xe0
>> >> [i915]
>> >> [   13.033632] RIP: 0010:vlv_wait_port_ready+0x99/0xe0 [i915]
>> >>
>> >> although there are a few uvcvideo warnings:
>> >> [   13.039305] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was
>> >> not
>> >> initialized!
>> >> [   13.039318] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was
>> >> not
>> >> initialized!
>> >> [   13.039330] uvcvideo 1-5:1.0: Entity type for entity Processing 2
>> >> was not
>> >> initialized!
>> >> [   13.039339] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was
>> >> not
>> >> initialized!
>> >>
>> >> Laurent, do you see any uvc issues here?  Any ideas/suggestions?
>
> No, uvcvideo seems completely reunlated.
>
>> >> @intel-gfx:  any ideas about what is going on here with the i915
>> >> driver?
>> >>
>> >> Original message to lkml:
>> >> https://lore.kernel.org/lkml/CAONH+Jm-O6=DQ+K2n5pNTNMg2Sq1KcVNFLuweVh6W82OPEFJoQ@mail.gmail.com/T/#u
>> >>
>> >> Previous message for 5.1.21 kernel:
>> >> https://lore.kernel.org/lkml/CAONH+JkTFujY9vEyNNuem+9rJ2qBKkf-PbKk9=DBSVEp6kW=yw@mail.gmail.com/
>
> --
> Regards,
>
> Laurent Pinchart
>

[-- Attachment #2: kernel --]
[-- Type: application/octet-stream, Size: 49883 bytes --]

[    0.000000] Linux version 4.20.17 (root@reddog.example.net) (gcc version 8.3.0 (GCC)) #1 SMP Mon Mar 25 16:39:44 CDT 2019
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz root=/dev/sda1 ro vga = normal psmouse.synaptics_intertouch=1
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007a7e7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a7e8000-0x000000007a869fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a86a000-0x000000007a87bfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007a87c000-0x000000007b5aafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007b5ab000-0x000000007ba3afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ba3b000-0x000000007bc06fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bc07000-0x000000007bfc4fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007bfc5000-0x000000007bffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Dell Inc. Inspiron 15-3552/001T3K, BIOS 4.4.0 03/06/2018
[    0.000000] tsc: Detected 1600.000 MHz processor
[    0.003415] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.003418] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.003432] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.003439] MTRR default type: uncachable
[    0.003440] MTRR fixed ranges enabled:
[    0.003443]   00000-9FFFF write-back
[    0.003444]   A0000-BFFFF uncachable
[    0.003446]   C0000-FFFFF write-protect
[    0.003448] MTRR variable ranges enabled:
[    0.003450]   0 base 000000000 mask F80000000 write-back
[    0.003453]   1 base 07C800000 mask FFF800000 uncachable
[    0.003455]   2 base 07D000000 mask FFF000000 uncachable
[    0.003457]   3 base 07E000000 mask FFE000000 uncachable
[    0.003459]   4 base 100000000 mask F80000000 write-back
[    0.003460]   5 disabled
[    0.003461]   6 disabled
[    0.003462]   7 disabled
[    0.003730] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.004004] e820: update [mem 0x7c800000-0xffffffff] usable ==> reserved
[    0.004016] last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[    0.010697] found SMP MP-table at [mem 0x000fdad0-0x000fdadf] mapped at [(____ptrval____)]
[    0.011251] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.011262] BRK [0x56401000, 0x56401fff] PGTABLE
[    0.011266] BRK [0x56402000, 0x56402fff] PGTABLE
[    0.011269] BRK [0x56403000, 0x56403fff] PGTABLE
[    0.011320] BRK [0x56404000, 0x56404fff] PGTABLE
[    0.011327] BRK [0x56405000, 0x56405fff] PGTABLE
[    0.011444] BRK [0x56406000, 0x56406fff] PGTABLE
[    0.011452] BRK [0x56407000, 0x56407fff] PGTABLE
[    0.011585] BRK [0x56408000, 0x56408fff] PGTABLE
[    0.011600] BRK [0x56409000, 0x56409fff] PGTABLE
[    0.011673] ACPI: Early table checksum verification disabled
[    0.011749] ACPI: RSDP 0x00000000000F0580 000024 (v02 DELL  )
[    0.011757] ACPI: XSDT 0x000000007A86D0A0 0000C4 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.011769] ACPI: FACP 0x000000007A877618 00010C (v05 DELL   WN09     01072009 AMI  00010013)
[    0.011780] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20181003/tbfadt-569)
[    0.011788] ACPI: DSDT 0x000000007A86D1F8 00A41B (v02 DELL   WN09     01072009 INTL 20120913)
[    0.011796] ACPI: FACS 0x000000007B5A8E80 000040
[    0.011803] ACPI: APIC 0x000000007A877728 000068 (v03 DELL   WN09     01072009 AMI  00010013)
[    0.011810] ACPI: FPDT 0x000000007A877790 000044 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.011818] ACPI: FIDT 0x000000007A8777D8 00009C (v01 DELL   WN09     01072009 AMI  00010013)
[    0.011826] ACPI: MCFG 0x000000007A877878 00003C (v01 DELL   WN09     01072009 MSFT 00000097)
[    0.011833] ACPI: BOOT 0x000000007A8778B8 000028 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.011841] ACPI: SLIC 0x000000007A8778E0 000176 (v01 ALWARE ALIENWRE 01072009 AMI  00010013)
[    0.011848] ACPI: SLIC 0x000000007A877A58 000176 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.011856] ACPI: HPET 0x000000007A877BD0 000038 (v01 DELL   WN09     01072009 AMI. 00000006)
[    0.011863] ACPI: SSDT 0x000000007A877C08 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.011871] ACPI: SSDT 0x000000007A878370 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
[    0.011879] ACPI: SSDT 0x000000007A878600 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
[    0.011887] ACPI: UEFI 0x000000007A878780 000042 (v01 DELL   WN09     00000000      00000000)
[    0.011894] ACPI: SSDT 0x000000007A8787C8 000427 (v01 Intel_ Tpm2Tabl 00001000 INTL 20061109)
[    0.011902] ACPI: TPM2 0x000000007A878BF0 000034 (v03                 00000000      00000000)
[    0.011910] ACPI: MSDM 0x000000007A878C28 000055 (v03 DELL   WN09     01072009 AMI  00010013)
[    0.011917] ACPI: LPIT 0x000000007A878C80 000104 (v01 DELL   WN09     00000005 MSFT 0100000D)
[    0.011925] ACPI: CSRT 0x000000007A878D88 00014C (v00 INTEL  LANFORDC 00000005 MSFT 0100000D)
[    0.011932] ACPI: SSDT 0x000000007A878ED8 000545 (v01 CpuDpf CpuDptf  00001000 INTL 20061109)
[    0.011940] ACPI: SSDT 0x000000007A879420 001ED7 (v01 DptfTb DptfTab  00001000 INTL 20061109)
[    0.011961] ACPI: Local APIC address 0xfee00000
[    0.012214] No NUMA configuration found
[    0.012218] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[    0.012226] NODE_DATA(0) allocated [mem 0x17fff9000-0x17fffdfff]
[    0.012278] Zone ranges:
[    0.012281]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.012286]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.012289]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
[    0.012293]   Device   empty
[    0.012296] Movable zone start for each node
[    0.012299] Early memory node ranges
[    0.012302]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.012305]   node   0: [mem 0x0000000000100000-0x000000003fffffff]
[    0.012308]   node   0: [mem 0x0000000040200000-0x000000007a7e7fff]
[    0.012311]   node   0: [mem 0x000000007ba3b000-0x000000007bc06fff]
[    0.012314]   node   0: [mem 0x000000007bfc5000-0x000000007bffffff]
[    0.012317]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.013369] Zeroed struct page in unavailable ranges: 22645 pages
[    0.013374] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.013381] On node 0 totalpages: 1025931
[    0.013384]   DMA zone: 64 pages used for memmap
[    0.013386]   DMA zone: 21 pages reserved
[    0.013388]   DMA zone: 3996 pages, LIFO batch:0
[    0.013663]   DMA32 zone: 7776 pages used for memmap
[    0.013665]   DMA32 zone: 497647 pages, LIFO batch:63
[    0.053473]   Normal zone: 8192 pages used for memmap
[    0.053476]   Normal zone: 524288 pages, LIFO batch:63
[    0.087588] Reserving Intel graphics memory at [mem 0x7ce00000-0x7edfffff]
[    0.088397] ACPI: PM-Timer IO Port: 0x408
[    0.088402] ACPI: Local APIC address 0xfee00000
[    0.088414] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.088418] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.088439] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.088444] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.088449] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.088453] ACPI: IRQ0 used by override.
[    0.088455] ACPI: IRQ9 used by override.
[    0.088458] Using ACPI (MADT) for SMP configuration information
[    0.088463] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.088475] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.088518] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.088524] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.088527] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.088529] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.088532] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.088537] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.088542] PM: Registered nosave memory: [mem 0x7a7e8000-0x7a869fff]
[    0.088545] PM: Registered nosave memory: [mem 0x7a86a000-0x7a87bfff]
[    0.088547] PM: Registered nosave memory: [mem 0x7a87c000-0x7b5aafff]
[    0.088550] PM: Registered nosave memory: [mem 0x7b5ab000-0x7ba3afff]
[    0.088555] PM: Registered nosave memory: [mem 0x7bc07000-0x7bfc4fff]
[    0.088560] PM: Registered nosave memory: [mem 0x7c000000-0x7cdfffff]
[    0.088563] PM: Registered nosave memory: [mem 0x7ce00000-0x7edfffff]
[    0.088566] PM: Registered nosave memory: [mem 0x7ee00000-0xe00f7fff]
[    0.088568] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.088571] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[    0.088574] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.088576] PM: Registered nosave memory: [mem 0xfed02000-0xfed07fff]
[    0.088579] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.088582] PM: Registered nosave memory: [mem 0xfed09000-0xff97ffff]
[    0.088585] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[    0.088590] [mem 0x7ee00000-0xe00f7fff] available for PCI devices
[    0.088593] Booting paravirtualized kernel on bare hardware
[    0.088602] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.560370] random: get_random_bytes called from start_kernel+0x8f/0x500 with crng_init=0
[    0.560394] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.561272] percpu: Embedded 43 pages/cpu @(____ptrval____) s139264 r8192 d28672 u1048576
[    0.561293] pcpu-alloc: s139264 r8192 d28672 u1048576 alloc=1*2097152
[    0.561295] pcpu-alloc: [0] 0 1 
[    0.561342] Built 1 zonelists, mobility grouping on.  Total pages: 1009878
[    0.561346] Policy zone: Normal
[    0.561351] Kernel command line: BOOT_IMAGE=/vmlinuz root=/dev/sda1 ro vga = normal psmouse.synaptics_intertouch=1
[    0.618667] Memory: 3934792K/4103724K available (16389K kernel code, 1780K rwdata, 4868K rodata, 1708K init, 3524K bss, 168932K reserved, 0K cma-reserved)
[    0.619089] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.619103] Kernel/User page tables isolation: enabled
[    0.619140] ftrace: allocating 50689 entries in 199 pages
[    0.659164] rcu: Hierarchical RCU implementation.
[    0.659172] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.659174] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.659177] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.659181] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.659184] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.659948] NR_IRQS: 16640, nr_irqs: 512, preallocated irqs: 16
[    0.660262] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.660350] spurious 8259A interrupt: IRQ7.
[    0.663117] Console: colour VGA+ 80x25
[    0.679928] printk: console [tty0] enabled
[    0.680110] ACPI: Core revision 20181003
[    0.680643] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.680834] hpet clockevent registered
[    0.680845] APIC: Switch to symmetric I/O mode setup
[    0.682725] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.687850] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    0.688026] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=1600000)
[    0.688201] pid_max: default: 32768 minimum: 301
[    0.688408] LSM: Security Framework initializing
[    0.690705] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.691929] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.692123] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.692292] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.692903] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.693032] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.693168] mce: CPU supports 6 MCE banks
[    0.693297] process: using mwait in idle threads
[    0.693423] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.693540] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.693665] Spectre V2 : Mitigation: Full generic retpoline
[    0.693789] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.694028] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.694156] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.695340] Freeing SMP alternatives memory: 48K
[    0.696224] TSC deadline timer enabled
[    0.696230] smpboot: CPU0: Intel(R) Celeron(R) CPU  N3060  @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x4)
[    0.696948] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.697035] ... version:                3
[    0.697276] ... bit width:              40
[    0.697516] ... generic registers:      2
[    0.697755] ... value mask:             000000ffffffffff
[    0.697996] ... max period:             0000007fffffffff
[    0.698029] ... fixed-purpose events:   3
[    0.698269] ... event mask:             0000000700000003
[    0.698608] rcu: Hierarchical SRCU implementation.
[    0.699096] random: crng done (trusting CPU's manufacturer)
[    0.699433] smp: Bringing up secondary CPUs ...
[    0.699941] x86: Booting SMP configuration:
[    0.700036] .... node  #0, CPUs:      #1
[    0.700175] smp: Brought up 1 node, 2 CPUs
[    0.700513] smpboot: Max logical packages: 1
[    0.700753] smpboot: Total of 2 processors activated (6400.00 BogoMIPS)
[    0.702032] devtmpfs: initialized
[    0.702397] x86/mm: Memory block size: 128MB
[    0.704067] PM: Registering ACPI NVS region [mem 0x7a87c000-0x7b5aafff] (13824000 bytes)
[    0.705131] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.705554] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.705928] xor: measuring software checksum speed
[    0.716029]    prefetch64-sse:  6628.000 MB/sec
[    0.726028]    generic_sse:  5868.000 MB/sec
[    0.726269] xor: using function: prefetch64-sse (6628.000 MB/sec)
[    0.726522] pinctrl core: initialized pinctrl subsystem
[    0.727292] NET: Registered protocol family 16
[    0.727817] audit: initializing netlink subsys (disabled)
[    0.728104] audit: type=2000 audit(1565971765.045:1): state=initialized audit_enabled=0 res=1
[    0.728481] cpuidle: using governor ladder
[    0.728481] cpuidle: using governor menu
[    0.729176] Simple Boot Flag at 0x47 set to 0x1
[    0.729448] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.729851] ACPI: bus type PCI registered
[    0.730031] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.730432] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.730841] PCI: not using MMCONFIG
[    0.731030] PCI: Using configuration type 1 for base access
[    0.737299] cryptd: max_cpu_qlen set to 1000
[    0.755048] raid6: sse2x1   gen()  1179 MB/s
[    0.772035] raid6: sse2x1   xor()  1628 MB/s
[    0.789044] raid6: sse2x2   gen()  2117 MB/s
[    0.806030] raid6: sse2x2   xor()  1984 MB/s
[    0.823040] raid6: sse2x4   gen()  3050 MB/s
[    0.840039] raid6: sse2x4   xor()  1750 MB/s
[    0.840281] raid6: using algorithm sse2x4 gen() 3050 MB/s
[    0.840522] raid6: .... xor() 1750 MB/s, rmw enabled
[    0.840764] raid6: using ssse3x2 recovery algorithm
[    0.841151] ACPI: Added _OSI(Module Device)
[    0.841393] ACPI: Added _OSI(Processor Device)
[    0.841634] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.841875] ACPI: Added _OSI(Processor Aggregator Device)
[    0.842036] ACPI: Added _OSI(Linux-Dell-Video)
[    0.842278] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.859385] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.863543] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.870135] ACPI: Dynamic OEM Table Load:
[    0.870392] ACPI: SSDT 0xFFFFA07EBA94A800 0005F2 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.871653] ACPI: Dynamic OEM Table Load:
[    0.871905] ACPI: SSDT 0xFFFFA07EBAA3F000 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.873051] ACPI: Dynamic OEM Table Load:
[    0.873301] ACPI: SSDT 0xFFFFA07EBA9B2000 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.874189] ACPI: Dynamic OEM Table Load:
[    0.874439] ACPI: SSDT 0xFFFFA07EBA965F00 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.876489] ACPI: Interpreter enabled
[    0.876783] ACPI: (supports S0 S3 S4 S5)
[    0.877024] ACPI: Using IOAPIC for interrupt routing
[    0.877114] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.879557] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.880000] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.880821] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.884568] ACPI: Power Resource [USBC] (on)
[    0.903089] ACPI: Power Resource [FN00] (off)
[    0.904739] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.904995] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.905125] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.906235] PCI host bridge to bus 0000:00
[    0.906481] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.906726] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.906972] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.907032] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.907278] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.907680] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.908030] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.908432] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.908835] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.909042] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.909303] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.909330] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.909344] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.909354] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.909612] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[    0.909640] pci 0000:00:0b.0: reg 0x10: [mem 0x91317000-0x91317fff 64bit]
[    0.909942] pci 0000:00:10.0: [8086:2294] type 00 class 0x080501
[    0.909973] pci 0000:00:10.0: reg 0x10: [mem 0x91316000-0x91316fff]
[    0.910080] pci 0000:00:10.0: PME# supported from D0 D3hot
[    0.910349] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[    0.910416] pci 0000:00:13.0: reg 0x20: [io  0xf060-0xf07f]
[    0.910429] pci 0000:00:13.0: reg 0x24: [mem 0x91315000-0x913157ff]
[    0.910495] pci 0000:00:13.0: PME# supported from D3hot
[    0.910706] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.910744] pci 0000:00:14.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[    0.910842] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.911093] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.911121] pci 0000:00:1a.0: reg 0x10: [mem 0x91100000-0x911fffff]
[    0.911134] pci 0000:00:1a.0: reg 0x14: [mem 0x91000000-0x910fffff]
[    0.911225] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.911436] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.911473] pci 0000:00:1b.0: reg 0x10: [mem 0x91310000-0x91313fff 64bit]
[    0.911578] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.911951] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.913606] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.914240] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.914574] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    0.914644] pci 0000:00:1f.3: reg 0x10: [mem 0x91314000-0x9131401f]
[    0.914760] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.915834] pci 0000:01:00.0: [8086:3165] type 00 class 0x028000
[    0.916108] pci 0000:01:00.0: reg 0x10: [mem 0x91200000-0x91201fff 64bit]
[    0.916928] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.917510] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.917841] pci 0000:00:1c.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.918876] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.919170] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.919716] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.920108] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.920497] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.920884] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.921168] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.921555] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.925548] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.925548] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.926040] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.926284] vgaarb: loaded
[    0.926820] SCSI subsystem initialized
[    0.927127] libata version 3.00 loaded.
[    0.927127] ACPI: bus type USB registered
[    0.927350] usbcore: registered new interface driver usbfs
[    0.927617] usbcore: registered new interface driver hub
[    0.927895] usbcore: registered new device driver usb
[    0.928065] pps_core: LinuxPPS API ver. 1 registered
[    0.928307] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.928716] PTP clock support registered
[    0.929059] EDAC MC: Ver: 3.0.0
[    0.929551] PCI: Using ACPI for IRQ routing
[    0.940932] PCI: pci_cache_line_size set to 64 bytes
[    0.941092] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.941096] e820: reserve RAM buffer [mem 0x7a7e8000-0x7bffffff]
[    0.941099] e820: reserve RAM buffer [mem 0x7bc07000-0x7bffffff]
[    0.941365] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.941468] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.944061] clocksource: Switched to clocksource tsc-early
[    0.998779] VFS: Disk quotas dquot_6.6.0
[    0.999085] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.999418] pnp: PnP ACPI init
[    0.999791] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.000179] system 00:01: [io  0x0680-0x069f] has been reserved
[    1.000426] system 00:01: [io  0x0400-0x047f] has been reserved
[    1.000671] system 00:01: [io  0x0500-0x05fe] has been reserved
[    1.000923] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.001006] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.001109] pnp 00:03: Plug and Play ACPI device, IDs SYN060c PNP0f13 (active)
[    1.001210] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    1.001459] system 00:04: [mem 0xfe900000-0xfe902fff] has been reserved
[    1.001712] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.002908] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.003004] system 00:06: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.003262] system 00:06: [mem 0xfea00000-0xfeafffff] has been reserved
[    1.003509] system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
[    1.003761] system 00:06: [mem 0xfed03000-0xfed03fff] has been reserved
[    1.004007] system 00:06: [mem 0xfed06000-0xfed06fff] has been reserved
[    1.004261] system 00:06: [mem 0xfed08000-0xfed09fff] could not be reserved
[    1.004507] system 00:06: [mem 0xfed80000-0xfedbffff] could not be reserved
[    1.004753] system 00:06: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    1.004999] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[    1.005257] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.013881] pnp: PnP ACPI: found 7 devices
[    1.022791] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.023353] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.023663] pci 0000:00:1c.0:   bridge window [mem 0x91200000-0x912fffff]
[    1.024042] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    1.024046] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    1.024050] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    1.024053] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    1.024056] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    1.024059] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    1.024062] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    1.024066] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    1.024069] pci_bus 0000:01: resource 1 [mem 0x91200000-0x912fffff]
[    1.024293] NET: Registered protocol family 2
[    1.024873] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    1.025343] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.025900] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.026342] TCP: Hash tables configured (established 32768 bind 32768)
[    1.026705] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.026993] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.027527] NET: Registered protocol family 1
[    1.028118] RPC: Registered named UNIX socket transport module.
[    1.028364] RPC: Registered udp transport module.
[    1.028605] RPC: Registered tcp transport module.
[    1.028845] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.029100] NET: Registered protocol family 44
[    1.029368] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.042034] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x683 took 11946 usecs
[    1.042538] PCI: CLS 0 bytes, default 64
[    1.042652] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.042899] software IO TLB: mapped [mem 0x767e8000-0x7a7e8000] (64MB)
[    1.046781] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    1.047229] clocksource: Switched to clocksource tsc
[    1.050569] Initialise system trusted keyrings
[    1.050845] Key type blacklist registered
[    1.051172] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.054768] zbud: loaded
[    1.056052] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.056786] NFS: Registering the id_resolver key type
[    1.057067] Key type id_resolver registered
[    1.057308] Key type id_legacy registered
[    1.057553] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.057801] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.058483] ntfs: driver 2.1.32 [Flags: R/W].
[    1.058825] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.059215] JFS: nTxBlock = 8192, nTxLock = 65536
[    1.062494] SGI XFS with ACLs, security attributes, scrub, no debug enabled
[    1.063864] ocfs2: Registered cluster interface o2cb
[    1.064243] OCFS2 User DLM kernel interface loaded
[    1.078420] async_tx: api initialized (async)
[    1.078677] Key type asymmetric registered
[    1.078918] Asymmetric key parser 'x509' registered
[    1.079234] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.079726] io scheduler noop registered
[    1.079968] io scheduler deadline registered
[    1.080324] io scheduler cfq registered (default)
[    1.080567] io scheduler mq-deadline registered
[    1.080869] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    1.082465] intel_idle: MWAIT substates: 0x33000020
[    1.082467] intel_idle: v0.4.1 model 0x4C
[    1.082706] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.121682] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.395529] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.402824] Floppy drive(s): fd0 is 1.44M
[    1.416087] brd: module loaded
[    1.416999] fnic: Cisco FCoE HBA Driver, ver 1.6.0.34
[    1.417328] fnic: Successfully Initialized Trace Buffer
[    1.417705] fnic: Successfully Initialized FC_CTLR Trace Buffer
[    1.419436] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[    1.419684] Detecting Adaptec I2O RAID controllers...
[    1.420007] Adaptec aacraid driver 1.2.1[50877]-custom
[    1.420287] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    1.420635] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[    1.420960] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.1
[    1.421328] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    1.421803] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    1.422103] megasas: 07.706.03.00-rc1
[    1.422373] mpt3sas version 26.100.00.00 loaded
[    1.422748] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    1.423062] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    1.423327] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    1.423753] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    1.424183] ipr: IBM Power RAID SCSI Device Driver version: 2.6.4 (March 14, 2017)
[    1.424607] RocketRAID 3xxx/4xxx Controller driver v1.10.0
[    1.424874] stex: Promise SuperTrak EX Driver version: 6.02.0000.01
[    1.425273] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[    1.426550] ahci 0000:00:13.0: version 3.0
[    1.426969] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.427400] ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm apst 
[    1.428732] scsi host0: ahci
[    1.430227] scsi host1: ahci
[    1.430653] ata1: SATA max UDMA/133 abar m2048@0x91315000 port 0x91315100 irq 115
[    1.431093] ata2: SATA max UDMA/133 abar m2048@0x91315000 port 0x91315180 irq 115
[    1.433833] scsi host2: pata_legacy
[    1.434236] ata3: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    1.737289] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.737626] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.741358] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A5LH, 6D1M, max UDMA/133
[    1.752475] ata2.00: configured for UDMA/133
[    1.790335] ata1.00: ATA-8: TOSHIBA MQ01ABF050, AM0P2D, max UDMA/100
[    1.790640] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.794104] ata1.00: configured for UDMA/100
[    4.428145] floppy0: no floppy controllers found
[    4.429456] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABF0 2D   PQ: 0 ANSI: 5
[    4.430531] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.430989] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.431316] sd 0:0:0:0: [sda] Write Protect is off
[    4.431567] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.431623] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.434500] scsi 1:0:0:0: CD-ROM            PLDS     DVD+-RW DU-8A5LH 6D1M PQ: 0 ANSI: 5
[    4.491108] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    4.491523] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.492086] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.532412]  sda: sda1
[    4.534223] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.545425] scsi host2: pata_legacy
[    4.545833] ata4: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    4.712943] Fusion MPT base driver 3.04.20
[    4.713232] Copyright (c) 1999-2008 LSI Corporation
[    4.713503] Fusion MPT SPI Host driver 3.04.20
[    4.713828] Fusion MPT FC Host driver 3.04.20
[    4.714139] Fusion MPT SAS Host driver 3.04.20
[    4.714435] Fusion MPT misc device (ioctl) driver 3.04.20
[    4.714786] mptctl: Registered with Fusion MPT base driver
[    4.715065] mptctl: /dev/mptctl @ (major,minor=10,220)
[    4.715327] Fusion MPT LAN driver 3.04.20
[    4.715778] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.720978] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.721260] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.721789] mousedev: PS/2 mouse device common for all mice
[    4.722216] rtc_cmos 00:00: RTC can wake from S4
[    4.722776] rtc_cmos 00:00: registered as rtc0
[    4.723095] rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    4.724203] device-mapper: uevent: version 1.0.3
[    4.724927] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    4.726350] intel_pstate: Intel P-state driver initializing
[    4.727420] input: Speakup as /devices/virtual/input/input1
[    4.728101] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[    4.729277] speakup 3.1.6: initialized
[    4.729773] synth name on entry is: (null)
[    4.731299] Initializing XFRM netlink socket
[    4.731633] NET: Registered protocol family 17
[    4.733144] 9pnet: Installing 9P2000 support
[    4.733558] Key type dns_resolver registered
[    4.736109] microcode: sig=0x406c4, pf=0x1, revision=0x410
[    4.736629] microcode: Microcode Update Driver: v2.2.
[    4.736712] SSE version of gcm_enc/dec engaged.
[    4.746899] sched_clock: Marking stable (4724165662, 22716450)->(4792603338, -45721226)
[    4.747479] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    4.748276] registered taskstats version 1
[    4.748518] Loading compiled-in X.509 certificates
[    4.748801] zswap: loaded using pool lzo/zbud
[    4.749576] Btrfs loaded, crc32c=crc32c-generic
[    4.751572] Key type encrypted registered
[    4.753201] md: Waiting for all devices to be available before autodetect
[    4.753459] md: If you don't use raid, use raid=noautodetect
[    4.754016] md: Autodetecting RAID arrays.
[    4.754282] md: autorun ...
[    4.754526] md: ... autorun DONE.
[    4.845196] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.845638] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[    4.888593] devtmpfs: mounted
[    4.896074] Freeing unused decrypted memory: 2040K
[    4.897339] Freeing unused kernel image memory: 1708K
[    4.899668] Write protecting the kernel read-only data: 24576k
[    4.901674] Freeing unused kernel image memory: 2028K
[    4.903104] Freeing unused kernel image memory: 1276K
[    4.903731] rodata_test: all tests were successful
[    4.904167] Run /sbin/init as init process
[    6.355565] loop: module loaded
[    8.104732] udevd[622]: starting eudev-3.2.8
[    8.601405] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    8.601849] ACPI: Lid Switch [LID0]
[    8.602173] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    8.602587] ACPI: Power Button [PWRB]
[    8.602892] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[    8.603317] ACPI: Sleep Button [SLPB]
[    8.603632] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    8.604052] ACPI: Power Button [PWRF]
[    8.622931] proc_thermal 0000:00:0b.0: Creating sysfs group for PROC_THERMAL_PCI
[    8.693970] ACPI Warning: \_SB.DPTF._ART: Return Package has no elements (empty) (20181003/nsprepkg-96)
[    8.914131] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    8.918085] ACPI: AC Adapter [AC] (off-line)
[    9.074749] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    9.160174] battery: ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    9.160602] battery: ACPI: Battery Slot [BAT0] (battery present)
[    9.164710] thermal LNXTHERM:00: registered as thermal_zone4
[    9.164965] ACPI: Thermal Zone [THM] (39 C)
[    9.165832] thermal LNXTHERM:01: registered as thermal_zone5
[    9.166087] ACPI: Thermal Zone [TZ01] (39 C)
[    9.168930] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    9.364226] hidraw: raw HID events driver (C) Jiri Kosina
[    9.392591] sdhci: Secure Digital Host Controller Interface driver
[    9.392861] sdhci: Copyright(c) Pierre Ossman
[    9.559144] input: DELL Wireless hotkeys as /devices/virtual/input/input8
[    9.559172] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    9.569340] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.684871] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    9.685275] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    9.686809] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
[    9.687229] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    9.687564] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[    9.687969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.688378] usb usb1: Product: xHCI Host Controller
[    9.688621] usb usb1: Manufacturer: Linux 4.20.17 xhci-hcd
[    9.688864] usb usb1: SerialNumber: 0000:00:14.0
[    9.689306] hub 1-0:1.0: USB hub found
[    9.689568] hub 1-0:1.0: 7 ports detected
[    9.691470] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    9.691774] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    9.692241] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    9.692556] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
[    9.692960] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.693370] usb usb2: Product: xHCI Host Controller
[    9.693612] usb usb2: Manufacturer: Linux 4.20.17 xhci-hcd
[    9.693855] usb usb2: SerialNumber: 0000:00:14.0
[    9.694276] hub 2-0:1.0: USB hub found
[    9.694536] hub 2-0:1.0: 6 ports detected
[    9.729578] sdhci-pci 0000:00:10.0: SDHCI controller found [8086:2294] (rev 35)
[    9.730580] mmc0: SDHCI controller on PCI [0000:00:10.0] using ADMA
[    9.783292] Intel(R) Wireless WiFi driver for Linux
[    9.783546] Copyright(c) 2003- 2015 Intel Corporation
[   10.013340] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[   10.015561] Linux agpgart interface v0.103
[   10.063800] intel_rapl: Found RAPL domain package
[   10.064179] intel_rapl: Found RAPL domain core
[   10.146349] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
[   10.147087] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   10.147354] usb 1-2: Product: USB2.0 Hub
[   10.149151] hub 1-2:1.0: USB hub found
[   10.149916] hub 1-2:1.0: 4 ports detected
[   10.151444] usb: port power management may be unreliable
[   10.155956] iwlwifi 0000:01:00.0: Found debug destination: EXTERNAL_DRAM
[   10.156247] iwlwifi 0000:01:00.0: Found debug configuration: 0
[   10.157373] iwlwifi 0000:01:00.0: loaded firmware version 29.1654887522.0 op_mode iwlmvm
[   10.195837] psmouse serio1: synaptics: queried max coordinates: x [..5662], y [..4700]
[   10.225085] psmouse serio1: synaptics: queried min coordinates: x [1322..], y [1240..]
[   10.225518] psmouse serio1: synaptics: Trying to set up SMBus access
[   10.240462] psmouse serio1: synaptics: SMbus companion is not ready yet
[   10.272053] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[   10.272813] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[   10.287947] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[   10.289916] iwlwifi 0000:01:00.0: Allocated 0x00400000 bytes for firmware monitor.
[   10.298301] iwlwifi 0000:01:00.0: base HW address: 0c:54:15:01:6d:64
[   10.308957] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf40123/0x840300/0x12e800/0x0, board id: 3096, fw id: 2019836
[   10.348991] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   10.360086] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   10.361309] thermal thermal_zone6: failed to read out thermal zone (-61)
[   10.464050] usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
[   10.469230] usb 1-5: New USB device found, idVendor=0c45, idProduct=6710, bcdDevice=55.04
[   10.469648] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[   10.469900] usb 1-5: Product: Integrated_Webcam_HD
[   10.470162] usb 1-5: Manufacturer: CN0CVRNRLOG0083HA9W5A02
[   10.544452] usb 1-2.1: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[   10.544922] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   10.603241] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[   10.620053] usb 1-2.2: new high-speed USB device number 5 using xhci_hcd
[   10.696374] usb 1-2.2: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[   10.696791] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   10.697203] usb 1-2.2: Product: USB2.0-CRW
[   10.697451] usb 1-2.2: Manufacturer: Generic
[   10.697692] usb 1-2.2: SerialNumber: 20100201396000000
[   10.765056] usb 1-2.4: new full-speed USB device number 6 using xhci_hcd
[   10.849299] usb 1-2.4: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.34
[   10.849715] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   10.850127] usb 1-2.4: Product: Microsoft® Nano Transceiver v2.0
[   10.850372] usb 1-2.4: Manufacturer: Microsoft
[   11.091898] VFIO - User Level meta-driver version: 0.3
[   11.475370] [drm] Replacing VGA console driver
[   11.479808] Console: switching to colour dummy device 80x25
[   11.480216] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.480224] [drm] Driver supports precise vblank timestamp query.
[   11.481940] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   11.504713] [drm] Initialized i915 1.6.0 20180921 for 0000:00:02.0 on minor 0
[   11.506769] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   11.507061] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[   11.507373] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   11.658451] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10
[   11.743427] fbcon: inteldrmfb (fb0) is primary device
[   12.751992] usbcore: registered new interface driver rtsx_usb
[   13.044907] usbcore: registered new interface driver usbhid
[   13.044910] usbhid: USB HID core driver
[   13.047536] videodev: Linux video capture interface: v2.00
[   13.063104] Bluetooth: Core ver 2.22
[   13.063152] NET: Registered protocol family 31
[   13.063153] Bluetooth: HCI device and connection manager initialized
[   13.063161] Bluetooth: HCI socket layer initialized
[   13.063168] Bluetooth: L2CAP socket layer initialized
[   13.063175] Bluetooth: SCO socket layer initialized
[   13.115506] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6710)
[   13.121759] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:045E:0745.0001/input/input11
[   13.141618] usbcore: registered new interface driver btusb
[   13.143725] Console: switching to colour frame buffer device 170x48
[   13.159574] Bluetooth: hci0: read Intel version: 370810011003110e32
[   13.159581] Bluetooth: hci0: Intel device is already patched. patch num: 32
[   13.171784] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   13.172304] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12
[   13.175708] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:14.0-2.4/input0
[   13.176274] usbcore: registered new interface driver uvcvideo
[   13.176406] USB Video Class driver (1.1.1)
[   13.181906] input: Microsoft Microsoft® Nano Transceiver v2.0 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:045E:0745.0002/input/input13
[   13.182463] input: Microsoft Microsoft® Nano Transceiver v2.0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:045E:0745.0002/input/input14
[   13.239296] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:14.0-2.4/input1
[   13.242723] input: Microsoft Microsoft® Nano Transceiver v2.0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:045E:0745.0003/input/input15
[   13.301765] input: Microsoft Microsoft® Nano Transceiver v2.0 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:045E:0745.0003/input/input17
[   13.315993] hid-generic 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:14.0-2.4/input2
[   13.318982] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   13.322019] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.324963] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   13.327886] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   13.330803] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   13.345288] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[   13.348238] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[   13.351078] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   13.451871] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   13.458575] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   14.726056] hpet1: lost 9600 rtc interrupts
[   15.018371] EXT4-fs (sda1): re-mounted. Opts: (null)
[   15.745915] Adding 1048572k swap on /swapfile.  Priority:1 extents:1 across:1048572k FS
[   26.729392] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.729395] Bluetooth: BNEP filters: protocol multicast
[   26.729402] Bluetooth: BNEP socket layer initialized
[   31.315134] NET: Registered protocol family 10
[   31.336512] Segment Routing with IPv6
[   33.606971] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   33.621873] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[   33.710188] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[   33.712067] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[   33.720004] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   33.748580] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[   33.829734] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[   33.831424] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[   33.839121] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   35.200576] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   48.049138] FS-Cache: Loaded
[   48.079466] FS-Cache: Netfs 'cifs' registered for caching
[   48.080824] Key type cifs.spnego registered
[   48.080836] Key type cifs.idmap registered
[   48.082064] CIFS: Attempting to mount //10.7.0.45/SYS
[   48.097206] CIFS: Attempting to mount //10.7.0.45/MOM
[   48.113809] CIFS: Attempting to mount //10.7.0.45/KIDS
[   48.255968] CIFS: Attempting to mount //10.7.0.45/ROKU
[   48.293471] CIFS: Attempting to mount //10.7.0.45/MUSIC
[  112.268229] Bluetooth: RFCOMM TTY layer initialized
[  112.268241] Bluetooth: RFCOMM socket layer initialized
[  112.268259] Bluetooth: RFCOMM ver 1.11
[  165.546419] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  168.791745] wlan0: authenticate with 60:38:e0:94:04:16
[  168.798125] wlan0: send auth to 60:38:e0:94:04:16 (try 1/3)
[  168.800724] wlan0: authenticated
[  168.801256] wlan0: associate with 60:38:e0:94:04:16 (try 1/3)
[  168.803569] wlan0: RX AssocResp from 60:38:e0:94:04:16 (capab=0x411 status=0 aid=4)
[  168.805476] wlan0: associated
[  168.891831] wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by 60:38:e0:94:04:16
[  168.891851] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  169.036856] 8021q: 802.1Q VLAN Support v1.8
[  181.599392] fuse init (API version 7.28)

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Intel-gfx] Linux Kernel 5.2.8 (uvc or i915?)
  2019-08-16  1:53 ` Linux Kernel 5.2.8 (uvc or i915?) Randy Dunlap
       [not found]   ` <CAONH+JnZpbpdiwdajP7ke7X7wQGU7m4YoyZRDbLHKmRufkD6mQ@mail.gmail.com>
@ 2019-08-16 13:47   ` Jani Nikula
  2019-08-16 21:08     ` Nathaniel Russell
  1 sibling, 1 reply; 7+ messages in thread
From: Jani Nikula @ 2019-08-16 13:47 UTC (permalink / raw)
  To: Randy Dunlap, Nathaniel Russell, linux-kernel, dri-devel, intel-gfx
  Cc: Laurent Pinchart, linux-media

On Thu, 15 Aug 2019, Randy Dunlap <rdunlap@infradead.org> wrote:
> On 8/15/19 6:15 PM, Nathaniel Russell wrote:
>> I would really like help with the kernel error with my uvcvideo driver.
>> 
>
> Hi again.
>
> What makes you think that the problem is related to the uvcvideo driver?
> Does some previous kernel version work correctly?  If so, what version(s)?
>
>
> Does this warning message only happen when the uvcvideo driver is being loaded?
> Can you suppress loading of the uvcvideo driver to find out?
>
> Most of the problems/errors/warnings that I see are related to the i915 driver:
>
> [   13.032341] timed out waiting for port C ready: got 0x20, expected 0xe0
> [   13.032872] WARNING: CPU: 1 PID: 239 at drivers/gpu/drm/i915/intel_display.c:1597 vlv_wait_port_ready+0x99/0xe0 [i915]
> [   13.033632] RIP: 0010:vlv_wait_port_ready+0x99/0xe0 [i915]
>
> although there are a few uvcvideo warnings:
> [   13.039305] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
> [   13.039318] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
> [   13.039330] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
> [   13.039339] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
>
>
> Laurent, do you see any uvc issues here?  Any ideas/suggestions?
>
>
> @intel-gfx:  any ideas about what is going on here with the i915 driver?

Please file a bug over at [1], add drm.debug=14 module parameter, attach
dmesg to the bug, all the way from boot to reproducing the issue.


BR,
Jani.

[1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI&component=DRM/Intel




>
>
>
> Original message to lkml:
> https://lore.kernel.org/lkml/CAONH+Jm-O6=DQ+K2n5pNTNMg2Sq1KcVNFLuweVh6W82OPEFJoQ@mail.gmail.com/T/#u
>
> Previous message for 5.1.21 kernel:
> https://lore.kernel.org/lkml/CAONH+JkTFujY9vEyNNuem+9rJ2qBKkf-PbKk9=DBSVEp6kW=yw@mail.gmail.com/
>
>
> thanks.

-- 
Jani Nikula, Intel Open Source Graphics Center

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Intel-gfx] Linux Kernel 5.2.8 (uvc or i915?)
  2019-08-16 13:47   ` [Intel-gfx] Linux Kernel 5.2.8 (uvc or i915?) Jani Nikula
@ 2019-08-16 21:08     ` Nathaniel Russell
  2019-08-21 11:48       ` Jani Nikula
  0 siblings, 1 reply; 7+ messages in thread
From: Nathaniel Russell @ 2019-08-16 21:08 UTC (permalink / raw)
  To: Jani Nikula
  Cc: Randy Dunlap, linux-kernel, dri-devel, intel-gfx,
	Laurent Pinchart, linux-media

[-- Attachment #1: Type: text/plain, Size: 2215 bytes --]

Here is the file you requested with the debug information

On 8/16/19, Jani Nikula <jani.nikula@linux.intel.com> wrote:
> On Thu, 15 Aug 2019, Randy Dunlap <rdunlap@infradead.org> wrote:
>> On 8/15/19 6:15 PM, Nathaniel Russell wrote:
>>> I would really like help with the kernel error with my uvcvideo driver.
>>>
>>
>> Hi again.
>>
>> What makes you think that the problem is related to the uvcvideo driver?
>> Does some previous kernel version work correctly?  If so, what
>> version(s)?
>>
>>
>> Does this warning message only happen when the uvcvideo driver is being
>> loaded?
>> Can you suppress loading of the uvcvideo driver to find out?
>>
>> Most of the problems/errors/warnings that I see are related to the i915
>> driver:
>>
>> [   13.032341] timed out waiting for port C ready: got 0x20, expected
>> 0xe0
>> [   13.032872] WARNING: CPU: 1 PID: 239 at
>> drivers/gpu/drm/i915/intel_display.c:1597 vlv_wait_port_ready+0x99/0xe0
>> [i915]
>> [   13.033632] RIP: 0010:vlv_wait_port_ready+0x99/0xe0 [i915]
>>
>> although there are a few uvcvideo warnings:
>> [   13.039305] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was
>> not initialized!
>> [   13.039318] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was
>> not initialized!
>> [   13.039330] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was
>> not initialized!
>> [   13.039339] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not
>> initialized!
>>
>>
>> Laurent, do you see any uvc issues here?  Any ideas/suggestions?
>>
>>
>> @intel-gfx:  any ideas about what is going on here with the i915 driver?
>
> Please file a bug over at [1], add drm.debug=14 module parameter, attach
> dmesg to the bug, all the way from boot to reproducing the issue.
>
>
> BR,
> Jani.
>
> [1]
> https://bugs.freedesktop.org/enter_bug.cgi?product=DRI&component=DRM/Intel
>
>
>
>
>>
>>
>>
>> Original message to lkml:
>> https://lore.kernel.org/lkml/CAONH+Jm-O6=DQ+K2n5pNTNMg2Sq1KcVNFLuweVh6W82OPEFJoQ@mail.gmail.com/T/#u
>>
>> Previous message for 5.1.21 kernel:
>> https://lore.kernel.org/lkml/CAONH+JkTFujY9vEyNNuem+9rJ2qBKkf-PbKk9=DBSVEp6kW=yw@mail.gmail.com/
>>
>>
>> thanks.
>
> --
> Jani Nikula, Intel Open Source Graphics Center
>

[-- Attachment #2: debug --]
[-- Type: application/octet-stream, Size: 127914 bytes --]

[    0.000000] Linux version 5.2.8 (root@Dad.example.net) (gcc version 9.1.0 (GCC)) #1 SMP Wed Aug 14 19:23:52 CDT 2019
[    0.000000] Command line: BOOT_IMAGE=/bzImage root=/dev/sda1 ro vga = normal psmouse.synaptics_intertouch=1 drm.debug=14
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007a7e7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a7e8000-0x000000007a869fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a86a000-0x000000007a87bfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007a87c000-0x000000007b5aafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007b5ab000-0x000000007ba3afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ba3b000-0x000000007bc06fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bc07000-0x000000007bfc4fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007bfc5000-0x000000007bffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Dell Inc. Inspiron 15-3552/001T3K, BIOS 4.4.0 03/06/2018
[    0.000000] tsc: Detected 1600.000 MHz processor
[    0.003348] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.003351] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.003364] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.003370] MTRR default type: uncachable
[    0.003371] MTRR fixed ranges enabled:
[    0.003374]   00000-9FFFF write-back
[    0.003375]   A0000-BFFFF uncachable
[    0.003377]   C0000-FFFFF write-protect
[    0.003379] MTRR variable ranges enabled:
[    0.003381]   0 base 000000000 mask F80000000 write-back
[    0.003383]   1 base 07C800000 mask FFF800000 uncachable
[    0.003386]   2 base 07D000000 mask FFF000000 uncachable
[    0.003388]   3 base 07E000000 mask FFE000000 uncachable
[    0.003390]   4 base 100000000 mask F80000000 write-back
[    0.003391]   5 disabled
[    0.003392]   6 disabled
[    0.003393]   7 disabled
[    0.003670] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003910] e820: update [mem 0x7c800000-0xffffffff] usable ==> reserved
[    0.003921] last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[    0.010612] found SMP MP-table at [mem 0x000fdad0-0x000fdadf]
[    0.011175] BRK [0x58601000, 0x58601fff] PGTABLE
[    0.011180] BRK [0x58602000, 0x58602fff] PGTABLE
[    0.011183] BRK [0x58603000, 0x58603fff] PGTABLE
[    0.011343] BRK [0x58604000, 0x58604fff] PGTABLE
[    0.011347] BRK [0x58605000, 0x58605fff] PGTABLE
[    0.012096] BRK [0x58606000, 0x58606fff] PGTABLE
[    0.012106] BRK [0x58607000, 0x58607fff] PGTABLE
[    0.012343] BRK [0x58608000, 0x58608fff] PGTABLE
[    0.012459] BRK [0x58609000, 0x58609fff] PGTABLE
[    0.012637] ACPI: Early table checksum verification disabled
[    0.012714] ACPI: RSDP 0x00000000000F0580 000024 (v02 DELL  )
[    0.012722] ACPI: XSDT 0x000000007A86D0A0 0000C4 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.012733] ACPI: FACP 0x000000007A877618 00010C (v05 DELL   WN09     01072009 AMI  00010013)
[    0.012743] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20190509/tbfadt-564)
[    0.012751] ACPI: DSDT 0x000000007A86D1F8 00A41B (v02 DELL   WN09     01072009 INTL 20120913)
[    0.012759] ACPI: FACS 0x000000007B5A8E80 000040
[    0.012765] ACPI: APIC 0x000000007A877728 000068 (v03 DELL   WN09     01072009 AMI  00010013)
[    0.012772] ACPI: FPDT 0x000000007A877790 000044 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.012779] ACPI: FIDT 0x000000007A8777D8 00009C (v01 DELL   WN09     01072009 AMI  00010013)
[    0.012786] ACPI: MCFG 0x000000007A877878 00003C (v01 DELL   WN09     01072009 MSFT 00000097)
[    0.012794] ACPI: BOOT 0x000000007A8778B8 000028 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.012801] ACPI: SLIC 0x000000007A8778E0 000176 (v01 ALWARE ALIENWRE 01072009 AMI  00010013)
[    0.012808] ACPI: SLIC 0x000000007A877A58 000176 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.012815] ACPI: HPET 0x000000007A877BD0 000038 (v01 DELL   WN09     01072009 AMI. 00000006)
[    0.012822] ACPI: SSDT 0x000000007A877C08 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.012829] ACPI: SSDT 0x000000007A878370 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
[    0.012837] ACPI: SSDT 0x000000007A878600 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
[    0.012844] ACPI: UEFI 0x000000007A878780 000042 (v01 DELL   WN09     00000000      00000000)
[    0.012851] ACPI: SSDT 0x000000007A8787C8 000427 (v01 Intel_ Tpm2Tabl 00001000 INTL 20061109)
[    0.012859] ACPI: TPM2 0x000000007A878BF0 000034 (v03                 00000000      00000000)
[    0.012866] ACPI: MSDM 0x000000007A878C28 000055 (v03 DELL   WN09     01072009 AMI  00010013)
[    0.012873] ACPI: LPIT 0x000000007A878C80 000104 (v01 DELL   WN09     00000005 MSFT 0100000D)
[    0.012880] ACPI: CSRT 0x000000007A878D88 00014C (v00 INTEL  LANFORDC 00000005 MSFT 0100000D)
[    0.012887] ACPI: SSDT 0x000000007A878ED8 000545 (v01 CpuDpf CpuDptf  00001000 INTL 20061109)
[    0.012895] ACPI: SSDT 0x000000007A879420 001ED7 (v01 DptfTb DptfTab  00001000 INTL 20061109)
[    0.012915] ACPI: Local APIC address 0xfee00000
[    0.013169] No NUMA configuration found
[    0.013173] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[    0.013181] NODE_DATA(0) allocated [mem 0x17fff9000-0x17fffdfff]
[    0.013233] Zone ranges:
[    0.013236]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.013240]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.013243]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
[    0.013246]   Device   empty
[    0.013248] Movable zone start for each node
[    0.013251] Early memory node ranges
[    0.013254]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.013256]   node   0: [mem 0x0000000000100000-0x000000003fffffff]
[    0.013259]   node   0: [mem 0x0000000040200000-0x000000007a7e7fff]
[    0.013262]   node   0: [mem 0x000000007ba3b000-0x000000007bc06fff]
[    0.013264]   node   0: [mem 0x000000007bfc5000-0x000000007bffffff]
[    0.013267]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.013756] Zeroed struct page in unavailable ranges: 22645 pages
[    0.013760] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.013767] On node 0 totalpages: 1025931
[    0.013770]   DMA zone: 64 pages used for memmap
[    0.013771]   DMA zone: 21 pages reserved
[    0.013773]   DMA zone: 3996 pages, LIFO batch:0
[    0.013911]   DMA32 zone: 7776 pages used for memmap
[    0.013913]   DMA32 zone: 497647 pages, LIFO batch:63
[    0.036279]   Normal zone: 8192 pages used for memmap
[    0.036281]   Normal zone: 524288 pages, LIFO batch:63
[    0.052857] Reserving Intel graphics memory at [mem 0x7ce00000-0x7edfffff]
[    0.053672] ACPI: PM-Timer IO Port: 0x408
[    0.053676] ACPI: Local APIC address 0xfee00000
[    0.053689] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.053692] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.053713] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.053719] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.053723] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.053727] ACPI: IRQ0 used by override.
[    0.053729] ACPI: IRQ9 used by override.
[    0.053732] Using ACPI (MADT) for SMP configuration information
[    0.053736] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.053749] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.053795] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.053800] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.053803] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.053805] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.053807] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.053812] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.053817] PM: Registered nosave memory: [mem 0x7a7e8000-0x7a869fff]
[    0.053819] PM: Registered nosave memory: [mem 0x7a86a000-0x7a87bfff]
[    0.053821] PM: Registered nosave memory: [mem 0x7a87c000-0x7b5aafff]
[    0.053824] PM: Registered nosave memory: [mem 0x7b5ab000-0x7ba3afff]
[    0.053828] PM: Registered nosave memory: [mem 0x7bc07000-0x7bfc4fff]
[    0.053833] PM: Registered nosave memory: [mem 0x7c000000-0x7cdfffff]
[    0.053836] PM: Registered nosave memory: [mem 0x7ce00000-0x7edfffff]
[    0.053838] PM: Registered nosave memory: [mem 0x7ee00000-0xe00f7fff]
[    0.053840] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.053843] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[    0.053845] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.053847] PM: Registered nosave memory: [mem 0xfed02000-0xfed07fff]
[    0.053850] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.053852] PM: Registered nosave memory: [mem 0xfed09000-0xff97ffff]
[    0.053854] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[    0.053859] [mem 0x7ee00000-0xe00f7fff] available for PCI devices
[    0.053862] Booting paravirtualized kernel on bare hardware
[    0.053870] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.451903] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.452815] percpu: Embedded 51 pages/cpu s172032 r8192 d28672 u1048576
[    0.452836] pcpu-alloc: s172032 r8192 d28672 u1048576 alloc=1*2097152
[    0.452839] pcpu-alloc: [0] 0 1 
[    0.452888] Built 1 zonelists, mobility grouping on.  Total pages: 1009878
[    0.452892] Policy zone: Normal
[    0.452897] Kernel command line: BOOT_IMAGE=/bzImage root=/dev/sda1 ro vga = normal psmouse.synaptics_intertouch=1 drm.debug=14
[    0.517179] Memory: 3932680K/4103724K available (18436K kernel code, 1875K rwdata, 4888K rodata, 1788K init, 3180K bss, 171044K reserved, 0K cma-reserved)
[    0.517619] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.517652] Kernel/User page tables isolation: enabled
[    0.517692] ftrace: allocating 51432 entries in 201 pages
[    0.556384] rcu: Hierarchical RCU implementation.
[    0.556391] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.556393] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.556396] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.556399] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.556402] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.557200] NR_IRQS: 16640, nr_irqs: 512, preallocated irqs: 16
[    0.557525] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.557714] random: crng done (trusting CPU's manufacturer)
[    0.557764] spurious 8259A interrupt: IRQ7.
[    0.560533] Console: colour VGA+ 80x25
[    0.577183] printk: console [tty0] enabled
[    0.577361] ACPI: Core revision 20190509
[    0.577886] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.578076] hpet clockevent registered
[    0.578085] APIC: Switch to symmetric I/O mode setup
[    0.579969] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.585088] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    0.585264] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=1600000)
[    0.585438] pid_max: default: 32768 minimum: 301
[    0.585650] LSM: Security Framework initializing
[    0.587951] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.589183] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.589361] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.589531] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.590319] process: using mwait in idle threads
[    0.590453] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.590578] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.590705] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.590875] Spectre V2 : Mitigation: Full generic retpoline
[    0.590999] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.591166] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.591268] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.591438] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.591886] Freeing SMP alternatives memory: 48K
[    0.592465] TSC deadline timer enabled
[    0.592470] smpboot: CPU0: Intel(R) Celeron(R) CPU  N3060  @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x4)
[    0.593649] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.594074] ... version:                3
[    0.594267] ... bit width:              40
[    0.594507] ... generic registers:      2
[    0.594746] ... value mask:             000000ffffffffff
[    0.594987] ... max period:             0000007fffffffff
[    0.595227] ... fixed-purpose events:   3
[    0.595267] ... event mask:             0000000700000003
[    0.595606] rcu: Hierarchical SRCU implementation.
[    0.596064] smp: Bringing up secondary CPUs ...
[    0.596542] x86: Booting SMP configuration:
[    0.596785] .... node  #0, CPUs:      #1
[    0.596925] smp: Brought up 1 node, 2 CPUs
[    0.597512] smpboot: Max logical packages: 1
[    0.597753] smpboot: Total of 2 processors activated (6400.00 BogoMIPS)
[    0.598944] devtmpfs: initialized
[    0.599393] x86/mm: Memory block size: 128MB
[    0.600804] PM: Registering ACPI NVS region [mem 0x7a87c000-0x7b5aafff] (13824000 bytes)
[    0.601920] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.602280] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.602677] xor: measuring software checksum speed
[    0.612267]    prefetch64-sse:  6724.000 MB/sec
[    0.622266]    generic_sse:  5940.000 MB/sec
[    0.622507] xor: using function: prefetch64-sse (6724.000 MB/sec)
[    0.622760] pinctrl core: initialized pinctrl subsystem
[    0.623551] NET: Registered protocol family 16
[    0.624090] audit: initializing netlink subsys (disabled)
[    0.624342] audit: type=2000 audit(1565971343.044:1): state=initialized audit_enabled=0 res=1
[    0.624510] cpuidle: using governor ladder
[    0.624528] cpuidle: using governor menu
[    0.625426] Simple Boot Flag at 0x47 set to 0x1
[    0.625695] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.626098] ACPI: bus type PCI registered
[    0.626270] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.626669] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.627077] PCI: not using MMCONFIG
[    0.627269] PCI: Using configuration type 1 for base access
[    0.627981] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.637407] cryptd: max_cpu_qlen set to 1000
[    0.662346] raid6: sse2x4   gen()   710 MB/s
[    0.679286] raid6: sse2x4   xor()   964 MB/s
[    0.696329] raid6: sse2x2   gen()   839 MB/s
[    0.713280] raid6: sse2x2   xor()  2089 MB/s
[    0.730291] raid6: sse2x1   gen()  1449 MB/s
[    0.747273] raid6: sse2x1   xor()  1808 MB/s
[    0.747514] raid6: using algorithm sse2x1 gen() 1449 MB/s
[    0.747755] raid6: .... xor() 1808 MB/s, rmw enabled
[    0.747997] raid6: using ssse3x2 recovery algorithm
[    0.748415] ACPI: Added _OSI(Module Device)
[    0.748658] ACPI: Added _OSI(Processor Device)
[    0.748898] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.749138] ACPI: Added _OSI(Processor Aggregator Device)
[    0.749278] ACPI: Added _OSI(Linux-Dell-Video)
[    0.749520] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.749762] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.766721] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.770788] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.777406] ACPI: Dynamic OEM Table Load:
[    0.777662] ACPI: SSDT 0xFFFFA0137A959000 0005F2 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.778926] ACPI: Dynamic OEM Table Load:
[    0.779177] ACPI: SSDT 0xFFFFA0137AAA1800 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.780316] ACPI: Dynamic OEM Table Load:
[    0.780565] ACPI: SSDT 0xFFFFA0137A9BF600 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.781455] ACPI: Dynamic OEM Table Load:
[    0.781704] ACPI: SSDT 0xFFFFA0137A97DF00 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.783835] ACPI: Interpreter enabled
[    0.784130] ACPI: (supports S0 S3 S4 S5)
[    0.784273] ACPI: Using IOAPIC for interrupt routing
[    0.784604] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.787115] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.787307] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.788526] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.792416] ACPI: Power Resource [USBC] (on)
[    0.811404] ACPI: Power Resource [FN00] (off)
[    0.813070] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.813278] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.813780] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.814891] PCI host bridge to bus 0000:00
[    0.815137] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.815271] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.815517] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.815762] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.816008] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.816269] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.816672] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.817073] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.817269] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.817525] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.818024] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.818293] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.818551] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.818959] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.819460] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[    0.819729] pci 0000:00:0b.0: reg 0x10: [mem 0x91317000-0x91317fff 64bit]
[    0.820277] pci 0000:00:10.0: [8086:2294] type 00 class 0x080501
[    0.820552] pci 0000:00:10.0: reg 0x10: [mem 0x91316000-0x91316fff]
[    0.820902] pci 0000:00:10.0: PME# supported from D0 D3hot
[    0.821413] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[    0.821723] pci 0000:00:13.0: reg 0x20: [io  0xf060-0xf07f]
[    0.821977] pci 0000:00:13.0: reg 0x24: [mem 0x91315000-0x913157ff]
[    0.822286] pci 0000:00:13.0: PME# supported from D3hot
[    0.822744] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.823022] pci 0000:00:14.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[    0.823367] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.823878] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.824150] pci 0000:00:1a.0: reg 0x10: [mem 0x91100000-0x911fffff]
[    0.824280] pci 0000:00:1a.0: reg 0x14: [mem 0x91000000-0x910fffff]
[    0.824614] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.825075] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.825304] pci 0000:00:1b.0: reg 0x10: [mem 0x91310000-0x91313fff 64bit]
[    0.825654] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.826262] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.828156] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.828907] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.829480] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    0.829793] pci 0000:00:1f.3: reg 0x10: [mem 0x91314000-0x9131401f]
[    0.830151] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.831340] pci 0000:01:00.0: [8086:3165] type 00 class 0x028000
[    0.831842] pci 0000:01:00.0: reg 0x10: [mem 0x91200000-0x91201fff 64bit]
[    0.832958] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.833784] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.834112] pci 0000:00:1c.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.835346] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.835741] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.836296] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.836692] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.837087] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.837410] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.837805] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.838199] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.841802] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.841802] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.842280] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.842524] vgaarb: loaded
[    0.843086] SCSI subsystem initialized
[    0.843315] libata version 3.00 loaded.
[    0.843315] ACPI: bus type USB registered
[    0.843595] usbcore: registered new interface driver usbfs
[    0.843857] usbcore: registered new interface driver hub
[    0.844131] usbcore: registered new device driver usb
[    0.844317] pps_core: LinuxPPS API ver. 1 registered
[    0.844560] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.844970] PTP clock support registered
[    0.845301] EDAC MC: Ver: 3.0.0
[    0.845762] PCI: Using ACPI for IRQ routing
[    0.857171] PCI: pci_cache_line_size set to 64 bytes
[    0.857331] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.857335] e820: reserve RAM buffer [mem 0x7a7e8000-0x7bffffff]
[    0.857338] e820: reserve RAM buffer [mem 0x7bc07000-0x7bffffff]
[    0.857576] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.857735] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.860298] clocksource: Switched to clocksource tsc-early
[    1.239232] VFS: Disk quotas dquot_6.6.0
[    1.239530] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.239866] pnp: PnP ACPI init
[    1.240246] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.240664] system 00:01: [io  0x0680-0x069f] has been reserved
[    1.240913] system 00:01: [io  0x0400-0x047f] has been reserved
[    1.241158] system 00:01: [io  0x0500-0x05fe] has been reserved
[    1.241420] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.241512] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.241608] pnp 00:03: Plug and Play ACPI device, IDs SYN060c PNP0f13 (active)
[    1.241719] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    1.241969] system 00:04: [mem 0xfe900000-0xfe902fff] has been reserved
[    1.242222] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.243531] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.243638] system 00:06: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.243888] system 00:06: [mem 0xfea00000-0xfeafffff] has been reserved
[    1.247601] system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
[    1.247849] system 00:06: [mem 0xfed03000-0xfed03fff] has been reserved
[    1.248094] system 00:06: [mem 0xfed06000-0xfed06fff] has been reserved
[    1.248347] system 00:06: [mem 0xfed08000-0xfed09fff] could not be reserved
[    1.248594] system 00:06: [mem 0xfed80000-0xfedbffff] could not be reserved
[    1.248841] system 00:06: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    1.249087] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[    1.249346] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.258967] pnp: PnP ACPI: found 7 devices
[    1.267720] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.268151] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.268469] pci 0000:00:1c.0:   bridge window [mem 0x91200000-0x912fffff]
[    1.268843] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    1.269087] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    1.269338] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    1.269584] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    1.269829] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    1.270075] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    1.270326] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    1.270573] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    1.270820] pci_bus 0000:01: resource 1 [mem 0x91200000-0x912fffff]
[    1.271313] NET: Registered protocol family 2
[    1.271912] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    1.272389] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.272958] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.273408] TCP: Hash tables configured (established 32768 bind 32768)
[    1.273780] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.274079] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.274605] NET: Registered protocol family 1
[    1.275200] RPC: Registered named UNIX socket transport module.
[    1.275467] RPC: Registered udp transport module.
[    1.275709] RPC: Registered tcp transport module.
[    1.275950] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.276195] NET: Registered protocol family 44
[    1.276472] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.289135] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x621 took 11942 usecs
[    1.289637] PCI: CLS 0 bytes, default 64
[    1.289991] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.290238] software IO TLB: mapped [mem 0x767e8000-0x7a7e8000] (64MB)
[    1.290678] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    1.291113] clocksource: Switched to clocksource tsc
[    1.294893] Initialise system trusted keyrings
[    1.295163] Key type blacklist registered
[    1.295520] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.299349] zbud: loaded
[    1.300732] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.301478] NFS: Registering the id_resolver key type
[    1.301736] Key type id_resolver registered
[    1.301977] Key type id_legacy registered
[    1.302222] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.302500] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.303167] ntfs: driver 2.1.32 [Flags: R/W].
[    1.303530] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.303919] JFS: nTxBlock = 8192, nTxLock = 65536
[    1.307237] SGI XFS with ACLs, security attributes, scrub, no debug enabled
[    1.308552] ocfs2: Registered cluster interface o2cb
[    1.308919] OCFS2 User DLM kernel interface loaded
[    1.310622] async_tx: api initialized (async)
[    1.310872] Key type asymmetric registered
[    1.311114] Asymmetric key parser 'x509' registered
[    1.311394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.311887] io scheduler mq-deadline registered
[    1.312187] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    1.314171] intel_idle: MWAIT substates: 0x33000020
[    1.314174] intel_idle: v0.4.1 model 0x4C
[    1.314425] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.321377] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.596880] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.600450] Floppy drive(s): fd0 is 1.44M
[    1.613355] brd: module loaded
[    1.614188] fnic: Cisco FCoE HBA Driver, ver 1.6.0.47
[    1.614507] fnic: Successfully Initialized Trace Buffer
[    1.614868] fnic: Successfully Initialized FC_CTLR Trace Buffer
[    1.617469] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[    1.617731] Detecting Adaptec I2O RAID controllers...
[    1.618053] Adaptec aacraid driver 1.2.1[50877]-custom
[    1.618334] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    1.618690] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[    1.619012] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.1
[    1.619369] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    1.620439] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    1.620794] megasas: 07.707.51.00-rc1
[    1.621096] mpt3sas version 28.100.00.00 loaded
[    1.622931] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    1.623321] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    1.623607] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    1.624071] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    1.624541] ipr: IBM Power RAID SCSI Device Driver version: 2.6.4 (March 14, 2017)
[    1.625009] RocketRAID 3xxx/4xxx Controller driver v1.10.0
[    1.625300] stex: Promise SuperTrak EX Driver version: 6.02.0000.01
[    1.625692] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[    1.627603] ahci 0000:00:13.0: version 3.0
[    1.638503] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.638962] ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm apst 
[    1.641334] scsi host0: ahci
[    1.642703] scsi host1: ahci
[    1.643211] ata1: SATA max UDMA/133 abar m2048@0x91315000 port 0x91315100 irq 116
[    1.643650] ata2: SATA max UDMA/133 abar m2048@0x91315000 port 0x91315180 irq 116
[    1.646466] scsi host2: pata_legacy
[    1.646915] ata3: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    1.954562] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.954890] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.959345] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A5LH, 6D1M, max UDMA/133
[    1.971636] ata2.00: configured for UDMA/133
[    2.007857] ata1.00: ATA-8: TOSHIBA MQ01ABF050, AM0P2D, max UDMA/100
[    2.008151] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.012578] ata1.00: configured for UDMA/100
[    4.644719] floppy0: no floppy controllers found
[    4.645026] work still pending
[    4.645975] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABF0 2D   PQ: 0 ANSI: 5
[    4.646983] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.647468] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.647761] sd 0:0:0:0: [sda] Write Protect is off
[    4.648008] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.648055] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.656377] scsi 1:0:0:0: CD-ROM            PLDS     DVD+-RW DU-8A5LH 6D1M PQ: 0 ANSI: 5
[    4.707319] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    4.707760] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.708579] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.749307]  sda: sda1
[    4.751022] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.757180] scsi host2: pata_legacy
[    4.757642] ata4: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    4.930201] Fusion MPT base driver 3.04.20
[    4.930494] Copyright (c) 1999-2008 LSI Corporation
[    4.930745] Fusion MPT SPI Host driver 3.04.20
[    4.931047] Fusion MPT FC Host driver 3.04.20
[    4.931330] Fusion MPT SAS Host driver 3.04.20
[    4.931618] Fusion MPT misc device (ioctl) driver 3.04.20
[    4.932297] mptctl: Registered with Fusion MPT base driver
[    4.932544] mptctl: /dev/mptctl @ (major,minor=10,220)
[    4.932787] Fusion MPT LAN driver 3.04.20
[    4.933633] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.938322] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.938575] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.939419] mousedev: PS/2 mouse device common for all mice
[    4.939809] rtc_cmos 00:00: RTC can wake from S4
[    4.940908] rtc_cmos 00:00: registered as rtc0
[    4.941252] rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    4.942189] device-mapper: uevent: version 1.0.3
[    4.943122] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[    4.943778] intel_pstate: Intel P-state driver initializing
[    4.944689] input: Speakup as /devices/virtual/input/input1
[    4.945822] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[    4.946388] speakup 3.1.6: initialized
[    4.946683] synth name on entry is: (null)
[    4.948341] Initializing XFRM netlink socket
[    4.948674] NET: Registered protocol family 17
[    4.949604] 9pnet: Installing 9P2000 support
[    4.949989] Key type dns_resolver registered
[    4.952408] mce: Using 6 MCE banks
[    4.952942] microcode: sig=0x406c4, pf=0x1, revision=0x410
[    4.954173] microcode: Microcode Update Driver: v2.2.
[    4.954335] SSE version of gcm_enc/dec engaged.
[    4.961146] sched_clock: Marking stable (4938425862, 22691938)->(5013647600, -52529800)
[    4.962088] registered taskstats version 1
[    4.962337] Loading compiled-in X.509 certificates
[    4.962628] zswap: loaded using pool lzo/zbud
[    4.963780] Btrfs loaded, crc32c=crc32c-generic
[    4.964106] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    4.966076] Key type encrypted registered
[    4.971229] md: Waiting for all devices to be available before autodetect
[    4.971492] md: If you don't use raid, use raid=noautodetect
[    4.972633] md: Autodetecting RAID arrays.
[    4.972878] md: autorun ...
[    4.973116] md: ... autorun DONE.
[    5.067505] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.067956] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[    5.116768] devtmpfs: mounted
[    5.137443] Freeing unused decrypted memory: 2040K
[    5.138878] Freeing unused kernel image memory: 1788K
[    5.139369] Write protecting the kernel read-only data: 26624k
[    5.141465] Freeing unused kernel image memory: 2028K
[    5.142743] Freeing unused kernel image memory: 1256K
[    5.143213] rodata_test: all tests were successful
[    5.143680] Run /sbin/init as init process
[    6.568543] loop: module loaded
[    8.515319] udevd[643]: starting eudev-3.2.8
[    8.968795] proc_thermal 0000:00:0b.0: Creating sysfs group for PROC_THERMAL_PCI
[    9.090981] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    9.091387] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    9.092936] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
[    9.093365] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    9.094673] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    9.095085] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.095502] usb usb1: Product: xHCI Host Controller
[    9.095746] usb usb1: Manufacturer: Linux 5.2.8 xhci-hcd
[    9.095990] usb usb1: SerialNumber: 0000:00:14.0
[    9.096493] hub 1-0:1.0: USB hub found
[    9.096762] hub 1-0:1.0: 7 ports detected
[    9.103945] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    9.104324] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    9.104732] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    9.105041] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
[    9.105460] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.105864] usb usb2: Product: xHCI Host Controller
[    9.106108] usb usb2: Manufacturer: Linux 5.2.8 xhci-hcd
[    9.106213] ACPI Warning: \_SB.DPTF._ART: Return Package has no elements (empty) (20190509/nsprepkg-94)
[    9.106355] usb usb2: SerialNumber: 0000:00:14.0
[    9.106580] hub 2-0:1.0: USB hub found
[    9.107314] hub 2-0:1.0: 6 ports detected
[    9.122830] sdhci: Secure Digital Host Controller Interface driver
[    9.123051] sdhci: Copyright(c) Pierre Ossman
[    9.163289] input: DELL Wireless hotkeys as /devices/virtual/input/input3
[    9.165879] sdhci-pci 0000:00:10.0: SDHCI controller found [8086:2294] (rev 35)
[    9.167167] mmc0: SDHCI controller on PCI [0000:00:10.0] using ADMA
[    9.210317] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    9.211536] ACPI: Lid Switch [LID0]
[    9.211887] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    9.212327] ACPI: Power Button [PWRB]
[    9.212629] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[    9.213041] ACPI: Sleep Button [SLPB]
[    9.213364] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    9.213927] ACPI: Power Button [PWRF]
[    9.285506] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    9.297515] hidraw: raw HID events driver (C) Jiri Kosina
[    9.319234] battery: ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    9.319688] battery: ACPI: Battery Slot [BAT0] (battery present)
[    9.344069] thermal LNXTHERM:00: registered as thermal_zone4
[    9.344341] ACPI: Thermal Zone [THM] (33 C)
[    9.345342] thermal LNXTHERM:01: registered as thermal_zone5
[    9.345589] ACPI: Thermal Zone [TZ01] (33 C)
[    9.361648] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    9.422357] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    9.506032] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    9.506527] ACPI: AC Adapter [AC] (off-line)
[    9.544078] Linux agpgart interface v0.103
[    9.554015] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
[    9.554446] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    9.554669] usb 1-2: Product: USB2.0 Hub
[    9.561111] hub 1-2:1.0: USB hub found
[    9.561702] hub 1-2:1.0: 4 ports detected
[    9.562581] usb: port power management may be unreliable
[    9.681340] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    9.874299] usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
[    9.879208] usb 1-5: New USB device found, idVendor=0c45, idProduct=6710, bcdDevice=55.04
[    9.879623] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    9.879870] usb 1-5: Product: Integrated_Webcam_HD
[    9.880111] usb 1-5: Manufacturer: CN0CVRNRLOG0083HA9W5A02
[    9.955286] usb 1-2.1: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[    9.955715] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   10.028298] usb 1-2.2: new high-speed USB device number 5 using xhci_hcd
[   10.085160] [drm:i915_driver_load [i915]] No PCH found.
[   10.085213] [drm:i915_driver_load [i915]] WOPCM size: 1024KiB
[   10.085273] [drm:intel_uc_init_early [i915]] enable_guc=0 (submission:no huc:no)
[   10.085350] [drm:i915_driver_load [i915]] guc_log_level=0 (enabled:no, verbose:no, verbosity:0)
[   10.085404] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00
[   10.085695] i915 0000:00:02.0: Disabling error capture for VT-d workaround
[   10.086024] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 2048M
[   10.086078] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
[   10.086132] [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M
[   10.086135] i915 0000:00:02.0: vgaarb: deactivate vga console
[   10.090125] Console: switching to colour dummy device 80x25
[   10.090291] [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ed00007
[   10.090358] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K
[   10.090707] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
[   10.090768] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7aea1000
[   10.090837] [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0
[   10.090895] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
[   10.090953] [drm:intel_opregion_setup [i915]] ASLE supported
[   10.091012] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
[   10.091015] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.091022] [drm] Driver supports precise vblank timestamp query.
[   10.091085] [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz
[   10.091143] [drm:intel_bios_init [i915]] VBT signature "$VBT CHERRYVIEW     ", BDB version 190
[   10.091203] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[   10.091261] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
[   10.091333] [drm:intel_opregion_get_panel_type [i915]] Failed to get panel details from OpRegion (-19)
[   10.091391] [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
[   10.091449] [drm:intel_bios_init [i915]] DRRS supported mode is seamless
[   10.091508] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
[   10.091538] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[   10.091596] [drm:intel_bios_init [i915]] VBT initial LVDS value 0
[   10.091655] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 260 Hz, active high, min brightness 15, level 255, controller 0
[   10.091714] [drm:intel_bios_init [i915]] DRRS State Enabled:1
[   10.091773] [drm:intel_bios_init [i915]] Skipping SDVO device mapping
[   10.091832] [drm:intel_bios_init [i915]] Port C VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 TCUSB:0 TBT:0
[   10.091890] [drm:intel_bios_init [i915]] Port C is internal DP
[   10.091949] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 0
[   10.092007] [drm:intel_bios_init [i915]] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 TCUSB:0 TBT:0
[   10.092066] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 0
[   10.092144] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
[   10.092210] [drm:i915_driver_load [i915]] rawclk rate: 200000 kHz
[   10.092278] [drm:intel_power_domains_init_hw [i915]] Initial PHY_CONTROL=0x150007fd
[   10.092405] [drm:intel_power_well_enable [i915]] enabling always-on
[   10.092465] [drm:intel_power_well_enable [i915]] enabling display
[   10.092538] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
[   10.092725] [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY0 (PHY_CONTROL=0x150007fd)
[   10.092791] [drm:intel_power_well_enable [i915]] enabling dpio-common-d
[   10.093052] [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY1 (PHY_CONTROL=0x150007ff)
[   10.094103] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0
[   10.094163] [drm:intel_modeset_init [i915]] 3 display pipes available.
[   10.094317] [drm:intel_modeset_init [i915]] CZ clock rate: 320000 kHz
[   10.094403] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 266667 kHz, VCO 1600000 kHz, ref 0 kHz, bypass 0 kHz, voltage level 11
[   10.094462] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 320000 kHz
[   10.094520] [drm:intel_modeset_init [i915]] Max dotclock rate: 304000 kHz
[   10.094527] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   10.094912] [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (platform default)
[   10.094973] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B
[   10.095048] [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (platform default)
[   10.095106] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B
[   10.095167] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT)
[   10.095244] [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (VBT)
[   10.095305] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port C
[   10.095384] [drm:intel_dp_pps_init [i915]] initial power sequencer for port C: pipe B
[   10.095448] [drm:intel_pps_dump_state [i915]] cur t1_t3 2000 t8 250 t9 2000 t10 500 t11_t12 7000
[   10.095507] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 250 t9 2000 t10 500 t11_t12 7000
[   10.095566] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 700
[   10.095624] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 25, off delay 200
[   10.095686] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f07
[   10.095752] [drm:edp_panel_vdd_on [i915]] Turning eDP port C VDD on
[   10.095814] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[   10.096299] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 81 41 00 00 01 00 02 02 06 00 00 0b 00
[   10.096715] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[   10.097088] [drm:intel_dp_init_connector [i915]] eDP DPCD: 01 13 47
[   10.100957] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[   10.100978] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   10.101018] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   10.101088] [drm:intel_panel_edid_fixed_mode [i915]] [CONNECTOR:92:eDP-1] using preferred mode from EDID: 
[   10.101109] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 70120 1366 1414 1446 1485 768 771 777 787 0x48 0x9
[   10.101168] [drm:intel_dp_init_connector [i915]] Downclock mode is not found. DRRS not supported
[   10.101229] [drm:intel_dp_init_connector [i915]] using pipe B for initial backlight setup
[   10.101292] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 6009/6009
[   10.101387] [drm:intel_bios_port_aux_ch [i915]] using AUX D for port D (platform default)
[   10.101448] [drm:intel_dp_init_connector [i915]] Adding DP connector on port D
[   10.101518] [drm:intel_bios_port_aux_ch [i915]] using AUX D for port D (platform default)
[   10.101576] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port D
[   10.101637] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x3 for port D (platform default)
[   10.101701] [drm:vlv_dsi_init [i915]] 
[   10.101773] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:46:pipe A] hw state readout: disabled
[   10.102000] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:63:pipe B] hw state readout: enabled
[   10.102063] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe C] hw state readout: disabled
[   10.102124] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:30:primary A] hw state readout: disabled, pipe A
[   10.102184] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:sprite A] hw state readout: disabled, pipe A
[   10.102245] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:38:sprite B] hw state readout: disabled, pipe A
[   10.102306] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:cursor A] hw state readout: disabled, pipe A
[   10.102382] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:primary B] hw state readout: disabled, pipe B
[   10.102443] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:50:sprite C] hw state readout: disabled, pipe B
[   10.102504] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:sprite D] hw state readout: disabled, pipe B
[   10.102565] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:cursor B] hw state readout: disabled, pipe B
[   10.102625] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:primary C] hw state readout: disabled, pipe C
[   10.102686] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:sprite E] hw state readout: disabled, pipe C
[   10.102746] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:72:sprite F] hw state readout: disabled, pipe C
[   10.102807] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor C] hw state readout: disabled, pipe C
[   10.102869] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:81:DP B] hw state readout: disabled, pipe A
[   10.102930] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:86:HDMI B] hw state readout: disabled, pipe A
[   10.102999] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:91:DP C] hw state readout: enabled, pipe B
[   10.103060] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP D] hw state readout: disabled, pipe A
[   10.103121] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:99:HDMI D] hw state readout: disabled, pipe A
[   10.103182] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:92:eDP-1] hw state readout: enabled
[   10.103243] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:82:DP-1] hw state readout: disabled
[   10.103304] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:87:HDMI-A-1] hw state readout: disabled
[   10.103373] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:97:DP-2] hw state readout: disabled
[   10.103435] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:100:HDMI-A-2] hw state readout: disabled
[   10.103510] [drm:intel_dump_pipe_config [i915]] [CRTC:46:pipe A][setup_hw_state]
[   10.103575] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
[   10.103634] [drm:intel_dump_pipe_config [i915]] output format: RGB
[   10.103693] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 0, dithering: 0
[   10.103751] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[   10.103809] [drm:intel_dump_pipe_config [i915]] infoframes enabled: 0x0
[   10.103867] [drm:intel_dump_pipe_config [i915]] requested mode:
[   10.103893] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   10.103951] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[   10.103971] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   10.104030] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[   10.104089] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
[   10.104148] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[   10.104206] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[   10.104265] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
[   10.104334] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[   10.104393] [drm:intel_dump_pipe_config [i915]] [PLANE:30:primary A] disabled, scaler_id = -1
[   10.104452] [drm:intel_dump_pipe_config [i915]] [PLANE:33:sprite A] disabled, scaler_id = -1
[   10.104511] [drm:intel_dump_pipe_config [i915]] [PLANE:38:sprite B] disabled, scaler_id = -1
[   10.104570] [drm:intel_dump_pipe_config [i915]] [PLANE:43:cursor A] disabled, scaler_id = -1
[   10.104631] [drm:intel_dump_pipe_config [i915]] [CRTC:63:pipe B][setup_hw_state]
[   10.104690] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
[   10.104748] [drm:intel_dump_pipe_config [i915]] output format: RGB
[   10.104807] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 18, dithering: 0
[   10.104866] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 4901743, gmch_n: 8388608, link_m: 136159, link_n: 524288, tu: 64
[   10.104924] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[   10.104983] [drm:intel_dump_pipe_config [i915]] infoframes enabled: 0x0
[   10.105041] [drm:intel_dump_pipe_config [i915]] requested mode:
[   10.105062] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 70119 720 1414 1446 1485 400 771 777 787 0x40 0x9
[   10.105120] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[   10.105140] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 70119 1366 1414 1446 1485 768 771 777 787 0x40 0x9
[   10.105200] [drm:intel_dump_pipe_config [i915]] crtc timings: 70119 1366 1414 1446 1485 768 771 777 787, type: 0x40 flags: 0x9
[   10.105258] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 720x400, pixel rate 70119
[   10.105317] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0xa0000000, ratios: 0x0855086f, lvds border: 0x00000000
[   10.105383] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[   10.105442] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: dpll: 0xb0006000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
[   10.105500] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[   10.105560] [drm:intel_dump_pipe_config [i915]] [PLANE:47:primary B] disabled, scaler_id = -1
[   10.105618] [drm:intel_dump_pipe_config [i915]] [PLANE:50:sprite C] disabled, scaler_id = -1
[   10.105677] [drm:intel_dump_pipe_config [i915]] [PLANE:55:sprite D] disabled, scaler_id = -1
[   10.105735] [drm:intel_dump_pipe_config [i915]] [PLANE:60:cursor B] disabled, scaler_id = -1
[   10.105794] [drm:intel_dump_pipe_config [i915]] [CRTC:80:pipe C][setup_hw_state]
[   10.105852] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
[   10.105911] [drm:intel_dump_pipe_config [i915]] output format: RGB
[   10.105969] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
[   10.106028] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[   10.106086] [drm:intel_dump_pipe_config [i915]] infoframes enabled: 0x0
[   10.106144] [drm:intel_dump_pipe_config [i915]] requested mode:
[   10.106165] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   10.106223] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[   10.106242] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   10.106301] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[   10.106366] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
[   10.106425] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[   10.106483] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[   10.106542] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
[   10.106600] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[   10.106659] [drm:intel_dump_pipe_config [i915]] [PLANE:64:primary C] disabled, scaler_id = -1
[   10.106718] [drm:intel_dump_pipe_config [i915]] [PLANE:67:sprite E] disabled, scaler_id = -1
[   10.106777] [drm:intel_dump_pipe_config [i915]] [PLANE:72:sprite F] disabled, scaler_id = -1
[   10.106835] [drm:intel_dump_pipe_config [i915]] [PLANE:77:cursor C] disabled, scaler_id = -1
[   10.107274] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15
[   10.107354] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15
[   10.107408] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe C, plane=15, cursor=15, sprite0=15, sprite1=15
[   10.107467] [drm:intel_modeset_setup_hw_state [i915]] Initial watermarks: SR plane=127, SR cursor=0 level=2 cxsr=0
[   10.107475] usb 1-2.2: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[   10.107488] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   10.107496] usb 1-2.2: Product: USB2.0-CRW
[   10.107500] usb 1-2.2: Manufacturer: Generic
[   10.107505] usb 1-2.2: SerialNumber: 20100201396000000
[   10.124094] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1000, 80000000]
[   10.124320] [drm:intel_engine_init_ctx_wa [i915]] Initialized 9 context workarounds
[   10.124621] [drm:i915_gem_contexts_init [i915]] logical context support initialized
[   10.126037] [drm:intel_init_gt_powersave [i915]] PCBR: 0x7edf8001
[   10.126173] [drm:intel_init_gt_powersave [i915]] GPLL reference freq: 40000 kHz
[   10.126301] [drm:intel_init_gt_powersave [i915]] DDR speed: 1600 MHz
[   10.126449] [drm:intel_init_gt_powersave [i915]] max GPU freq: 600 MHz (60)
[   10.126578] [drm:intel_init_gt_powersave [i915]] RPe GPU freq: 320 MHz (32)
[   10.126706] [drm:intel_init_gt_powersave [i915]] RP1(Guar) GPU freq: 320 MHz (32)
[   10.126834] [drm:intel_init_gt_powersave [i915]] min GPU freq: 200 MHz (20)
[   10.127221] [drm:intel_enable_gt_powersave [i915]] GPLL enabled? yes
[   10.127346] [drm:intel_enable_gt_powersave [i915]] GPU status: 0x00002010
[   10.128243] [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping
[   10.128383] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
[   10.128539] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
[   10.128678] [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config
[   10.129868] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
[   10.130034] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-eDP-1
[   10.130473] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1
[   10.130960] [drm:intel_dp_connector_register [i915]] registering DPDDC-D bus for card0-DP-2
[   10.131203] [drm] Initialized i915 1.6.0 20190417 for 0000:00:02.0 on minor 0
[   10.131673] [drm:intel_opregion_resume [i915]] 5 outputs detected
[   10.133328] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.133766] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[   10.134035] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   10.134079] [drm:drm_setup_crtcs [drm_kms_helper]] 
[   10.134091] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:eDP-1]
[   10.134152] [drm:intel_dp_detect [i915]] [CONNECTOR:92:eDP-1]
[   10.134215] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000
[   10.134273] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
[   10.134353] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
[   10.134430] [drm:intel_power_well_disable [i915]] disabling dpio-common-d
[   10.134538] [drm:chv_dpio_cmn_power_well_disable [i915]] Disabled DPIO PHY1 (PHY_CONTROL=0x150007fd)
[   10.134588] i915 device info: pciid=0x22b1 rev=0x35 platform=CHERRYVIEW (subplatform=0x0) gen=8
[   10.134590] i915 device info: is_mobile: no
[   10.134591] i915 device info: is_lp: yes
[   10.134592] i915 device info: is_alpha_support: no
[   10.134593] i915 device info: has_64bit_reloc: yes
[   10.134594] i915 device info: gpu_reset_clobbers_display: no
[   10.134595] i915 device info: has_reset_engine: yes
[   10.134596] i915 device info: has_fpga_dbg: no
[   10.134597] i915 device info: has_guc: no
[   10.134598] i915 device info: has_guc_ct: no
[   10.134599] i915 device info: has_l3_dpf: no
[   10.134600] i915 device info: has_llc: no
[   10.134601] i915 device info: has_logical_ring_contexts: yes
[   10.134602] i915 device info: has_logical_ring_elsq: no
[   10.134603] i915 device info: has_logical_ring_preemption: no
[   10.134604] i915 device info: has_pooled_eu: no
[   10.134605] i915 device info: has_rc6: yes
[   10.134606] i915 device info: has_rc6p: no
[   10.134607] i915 device info: has_runtime_pm: yes
[   10.134608] i915 device info: has_snoop: yes
[   10.134609] i915 device info: has_coherent_ggtt: no
[   10.134610] i915 device info: unfenced_needs_alignment: no
[   10.134611] i915 device info: hws_needs_physical: no
[   10.134612] i915 device info: cursor_needs_physical: no
[   10.134613] i915 device info: has_csr: no
[   10.134614] i915 device info: has_ddi: no
[   10.134615] i915 device info: has_dp_mst: no
[   10.134616] i915 device info: has_fbc: no
[   10.134617] i915 device info: has_gmch: yes
[   10.134618] i915 device info: has_hotplug: yes
[   10.134619] i915 device info: has_ipc: no
[   10.134620] i915 device info: has_overlay: no
[   10.134621] i915 device info: has_psr: no
[   10.134622] i915 device info: overlay_needs_physical: no
[   10.134623] i915 device info: supports_tv: no
[   10.134624] i915 device info: slice total: 1, mask=0001
[   10.134626] i915 device info: subslice total: 2
[   10.134627] i915 device info: slice0: 2 subslices, mask=0003
[   10.134628] i915 device info: EU total: 12
[   10.134629] i915 device info: EU per subslice: 6
[   10.134630] i915 device info: has slice power gating: no
[   10.134631] i915 device info: has subslice power gating: yes
[   10.134632] i915 device info: has EU power gating: yes
[   10.134633] i915 device info: CS timestamp frequency: 12500 kHz
[   10.134899] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[   10.134963] [drm:intel_dp_detect [i915]] MST support? port C: no, sink: no, modparam: yes
[   10.135290] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:eDP-1] status updated from unknown to connected
[   10.135329] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   10.135357] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[   10.135376] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   10.135432] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:eDP-1] probed modes :
[   10.135453] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 70120 1366 1414 1446 1485 768 771 777 787 0x48 0x9
[   10.135472] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 48 60500 1366 1414 1446 1551 768 771 777 813 0x40 0x9
[   10.135483] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-1]
[   10.135555] [drm:intel_dp_detect [i915]] [CONNECTOR:82:DP-1]
[   10.135568] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-1] status updated from unknown to disconnected
[   10.135577] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-1] disconnected
[   10.135588] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-1]
[   10.135647] [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-1]
[   10.135888] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[   10.135946] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[   10.136166] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[   10.136193] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   10.136251] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   10.136310] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[   10.136962] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   10.137021] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[   10.137244] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[   10.137303] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[   10.137532] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[   10.137548] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   10.137560] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-1] status updated from unknown to disconnected
[   10.137574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-1] disconnected
[   10.137585] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:97:DP-2]
[   10.137651] [drm:intel_dp_detect [i915]] [CONNECTOR:97:DP-2]
[   10.137704] [drm:intel_power_well_enable [i915]] enabling dpio-common-d
[   10.138057] [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY1 (PHY_CONTROL=0x150007ff)
[   10.141440] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.143967] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.146472] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.148974] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.151478] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.153984] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.156865] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.159378] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.161882] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.164389] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.166895] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.169398] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.171910] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.174415] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.175286] usb 1-2.4: new full-speed USB device number 6 using xhci_hcd
[   10.176922] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.179558] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.182065] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.184570] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.187320] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.189900] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.192413] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.194917] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.197832] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.200351] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.202857] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.215029] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.219668] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.221106] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   10.222412] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.225011] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.231289] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.233876] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.236421] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   10.236446] [drm:drm_dp_dpcd_access [drm_kms_helper]] Too many retries, giving up. First error: -110
[   10.236501] [drm:intel_power_well_disable [i915]] disabling dpio-common-d
[   10.236655] [drm:chv_dpio_cmn_power_well_disable [i915]] Disabled DPIO PHY1 (PHY_CONTROL=0x150007fd)
[   10.236682] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:97:DP-2] status updated from unknown to disconnected
[   10.236692] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:97:DP-2] disconnected
[   10.236708] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2]
[   10.236768] [drm:intel_hdmi_detect [i915]] [CONNECTOR:100:HDMI-A-2]
[   10.248301] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   10.256499] usb 1-2.4: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.34
[   10.256517] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   10.256525] usb 1-2.4: Product: Microsoft® Nano Transceiver v2.0
[   10.256530] usb 1-2.4: Manufacturer: Microsoft
[   10.288063] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[   10.304337] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel
[   10.304421] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   10.304481] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
[   10.320345] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel
[   10.320421] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
[   10.372381] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[   10.388318] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   10.388333] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2] status updated from unknown to disconnected
[   10.388343] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2] disconnected
[   10.388358] [drm:drm_setup_crtcs [drm_kms_helper]] connector 92 enabled? yes
[   10.388367] [drm:drm_setup_crtcs [drm_kms_helper]] connector 82 enabled? no
[   10.388377] [drm:drm_setup_crtcs [drm_kms_helper]] connector 87 enabled? no
[   10.388387] [drm:drm_setup_crtcs [drm_kms_helper]] connector 97 enabled? no
[   10.388396] [drm:drm_setup_crtcs [drm_kms_helper]] connector 100 enabled? no
[   10.388412] [drm:drm_setup_crtcs [drm_kms_helper]] Not using firmware configuration
[   10.388423] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 92
[   10.388433] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 92 0
[   10.388442] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1366x768
[   10.388451] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config
[   10.388465] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 46 (0,0)
[   10.388555] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
[   10.389822] [drm:intelfb_create [i915]] allocated 1366x768 fb: 0x00020000
[   10.389940] fbcon: i915drmfb (fb0) is primary device
[   10.390170] [drm:intel_atomic_check [i915]] [CONNECTOR:92:eDP-1] Limiting display bpp to 18 instead of EDID bpp 18, requested bpp 30, max platform bpp 30
[   10.390234] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 18 pixel clock 70120KHz
[   10.390292] [drm:intel_dp_compute_config [i915]] Force DSC en = 0
[   10.390368] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18
[   10.390426] [drm:intel_dp_compute_config [i915]] DP link rate required 157770 available 270000
[   10.390486] [drm:intel_atomic_check [i915]] hw max bpp: 18, pipe bpp: 18, dithering: 1
[   10.390547] [drm:pipe_config_err [i915]] mismatch in lane_count (expected 0, found 1)
[   10.390608] [drm:pipe_config_err [i915]] mismatch in dp_m_n (expected tu 0 gmch 0/0 link 0/0, or tu 0 gmch 0/0 link 0/0, found tu 64, gmch 2450871/4194304 link 136159/524288)
[   10.390667] [drm:pipe_config_err [i915]] mismatch in output_types (expected 0x00000000, found 0x00000100)
[   10.390725] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_hdisplay (expected 0, found 1366)
[   10.390783] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_htotal (expected 0, found 1485)
[   10.390842] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_hblank_start (expected 0, found 1366)
[   10.390900] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_hblank_end (expected 0, found 1485)
[   10.390959] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_hsync_start (expected 0, found 1414)
[   10.391017] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_hsync_end (expected 0, found 1446)
[   10.391076] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_vdisplay (expected 0, found 768)
[   10.391134] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_vtotal (expected 0, found 787)
[   10.391193] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_vblank_start (expected 0, found 768)
[   10.391251] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_vblank_end (expected 0, found 787)
[   10.391309] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_vsync_start (expected 0, found 771)
[   10.391386] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_vsync_end (expected 0, found 777)
[   10.391444] [drm:pipe_config_err [i915]] mismatch in pixel_multiplier (expected 0, found 1)
[   10.391504] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.flags (1) (expected 0, found 1)
[   10.391562] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.flags (8) (expected 0, found 8)
[   10.391623] [drm:pipe_config_err [i915]] mismatch in pipe_bpp (expected 0, found 18)
[   10.391682] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_clock (expected 0, found 70120)
[   10.391740] [drm:pipe_config_err [i915]] mismatch in port_clock (expected 0, found 270000)
[   10.391800] [drm:intel_dump_pipe_config [i915]] [CRTC:46:pipe A][modeset]
[   10.391859] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
[   10.391917] [drm:intel_dump_pipe_config [i915]] output format: RGB
[   10.391975] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 1
[   10.392035] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 2450871, gmch_n: 4194304, link_m: 136159, link_n: 524288, tu: 64
[   10.392093] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[   10.392151] [drm:intel_dump_pipe_config [i915]] infoframes enabled: 0x0
[   10.392209] [drm:intel_dump_pipe_config [i915]] requested mode:
[   10.392244] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 70120 1366 1414 1446 1485 768 771 777 787 0x48 0x9
[   10.392302] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[   10.392329] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 70120 1366 1414 1446 1485 768 771 777 787 0x48 0x9
[   10.392389] [drm:intel_dump_pipe_config [i915]] crtc timings: 70120 1366 1414 1446 1485 768 771 777 787, type: 0x48 flags: 0x9
[   10.392448] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1366x768, pixel rate 70120
[   10.392507] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[   10.392565] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[   10.392624] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
[   10.392682] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[   10.392741] [drm:intel_dump_pipe_config [i915]] [PLANE:30:primary A] disabled, scaler_id = -1
[   10.392799] [drm:intel_dump_pipe_config [i915]] [PLANE:33:sprite A] disabled, scaler_id = -1
[   10.392858] [drm:intel_dump_pipe_config [i915]] [PLANE:38:sprite B] disabled, scaler_id = -1
[   10.392916] [drm:intel_dump_pipe_config [i915]] [PLANE:43:cursor A] disabled, scaler_id = -1
[   10.392981] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 266667 kHz, actual 266667 kHz
[   10.393040] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 11, actual 11
[   10.393106] [drm:vlv_compute_pipe_wm [i915]] primary A watermarks: PM2=86, PM5=86, DDR DVFS=171
[   10.393594] [drm:intel_edp_backlight_off [i915]] 
[   10.522921] intel_rapl: Found RAPL domain package
[   10.522923] intel_rapl: Found RAPL domain core
[   10.546161] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.546164] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.546167] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   10.546168] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   10.546170] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   10.546173] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[   10.546175] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[   10.546177] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   10.552250] Intel(R) Wireless WiFi driver for Linux
[   10.552251] Copyright(c) 2003- 2015 Intel Corporation
[   10.597363] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
[   10.599426] [drm:intel_edp_panel_off.part.0 [i915]] Turn eDP port C panel power off
[   10.599549] [drm:intel_edp_panel_off.part.0 [i915]] Wait for panel power off time
[   10.599678] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status e0000002 control abcd0000
[   10.617362] iwlwifi 0000:01:00.0: Found debug destination: EXTERNAL_DRAM
[   10.617365] iwlwifi 0000:01:00.0: Found debug configuration: 0
[   10.618220] iwlwifi 0000:01:00.0: loaded firmware version 29.1654887522.0 op_mode iwlmvm
[   10.638379] [drm:wait_panel_status [i915]] Wait complete
[   10.638454] [drm:intel_disable_pipe [i915]] disabling pipe B
[   10.641175] [drm:i9xx_crtc_disable [i915]] disabling pfit, current: 0xa0000000
[   10.641285] [drm:intel_dp_link_down.isra.0 [i915]] 
[   10.683031] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
[   10.687131] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.687243] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.694643] [drm:chv_phy_powergate_lanes [i915]] Power gating DPIO PHY0 CH1 lanes 0x0 (PHY_CONTROL=0x050007fd)
[   10.694756] [drm:intel_atomic_commit_tail [i915]] [ENCODER:81:DP B]
[   10.694829] [drm:intel_atomic_commit_tail [i915]] [ENCODER:86:HDMI B]
[   10.694902] [drm:intel_atomic_commit_tail [i915]] [ENCODER:91:DP C]
[   10.694975] [drm:intel_atomic_commit_tail [i915]] [ENCODER:96:DP D]
[   10.695047] [drm:intel_atomic_commit_tail [i915]] [ENCODER:99:HDMI D]
[   10.695126] [drm:chv_phy_powergate_lanes [i915]] Power gating DPIO PHY0 CH1 lanes 0xe (PHY_CONTROL=0x150707fd)
[   10.696439] [drm:vlv_detach_power_sequencer [i915]] detaching pipe B power sequencer from port C
[   10.696514] [drm:intel_enable_dp [i915]] initializing pipe A power sequencer for port C
[   10.696591] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f07
[   10.696664] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
[   10.696741] [drm:edp_panel_vdd_on [i915]] Turning eDP port C VDD on
[   10.696815] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
[   10.705554] [drm:i9xx_hpd_irq_handler [i915]] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040, long 0x00000040
[   10.705615] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - long
[   10.705675] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 6 - cnt: 10
[   10.705838] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port C
[   10.725476] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[   10.762703] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[   10.770202] psmouse serio1: synaptics: queried max coordinates: x [..5662], y [..4700]
[   10.776192] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[   10.777756] iwlwifi 0000:01:00.0: Allocated 0x00400000 bytes for firmware monitor.
[   10.791701] iwlwifi 0000:01:00.0: base HW address: 0c:54:15:01:6d:64
[   10.814849] psmouse serio1: synaptics: queried min coordinates: x [1322..], y [1240..]
[   10.814852] psmouse serio1: synaptics: Trying to set up SMBus access
[   10.829849] psmouse serio1: synaptics: SMbus companion is not ready yet
[   10.859973] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   10.860443] thermal thermal_zone6: failed to read out thermal zone (-61)
[   10.886787] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf40123/0x840300/0x12e800/0x0, board id: 3096, fw id: 2019836
[   10.922958] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   11.372423] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control abcd0002
[   11.372506] [drm:wait_panel_status [i915]] Wait complete
[   11.372589] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd000a
[   11.372669] [drm:edp_panel_vdd_on [i915]] eDP port C panel power wasn't enabled
[   11.520434] [drm:i9xx_hpd_irq_handler [i915]] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040, long 0x00000040
[   11.522348] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - long
[   11.522421] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 6 - cnt: 20
[   11.522663] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port C
[   11.580678] [drm:edp_panel_on [i915]] Turn eDP port C panel power on
[   11.580998] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
[   11.581325] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control abcd000a
[   11.581683] [drm:wait_panel_status [i915]] Wait complete
[   11.581988] [drm:edp_panel_on [i915]] Wait for panel power on
[   11.582322] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control abcd000b
[   11.606721] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input12
[   11.733671] [drm:wait_panel_status [i915]] Wait complete
[   11.733985] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port C VDD off
[   11.734324] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
[   12.417043] Bluetooth: Core ver 2.22
[   12.417077] NET: Registered protocol family 31
[   12.417078] Bluetooth: HCI device and connection manager initialized
[   12.417085] Bluetooth: HCI socket layer initialized
[   12.417089] Bluetooth: L2CAP socket layer initialized
[   12.417095] Bluetooth: SCO socket layer initialized
[   12.631794] usbcore: registered new interface driver btusb
[   12.648384] Bluetooth: hci0: read Intel version: 370810011003110e00
[   12.736290] ------------[ cut here ]------------
[   12.736296] timed out waiting for port C ready: got 0x20, expected 0xe0
[   12.736561] WARNING: CPU: 0 PID: 29 at drivers/gpu/drm/i915/intel_display.c:1597 vlv_wait_port_ready+0x99/0xe0 [i915]
[   12.736563] Modules linked in: btusb btrtl btbcm btintel joydev bluetooth ecdh_generic ecc dell_wmi sparse_keymap wmi_bmof intel_xhci_usb_role_switch roles dell_smm_hwmon dell_laptop iwlmvm dell_smbios dell_wmi_descriptor dcdbas mac80211 snd_hda_codec_hdmi coretemp hwmon iwlwifi intel_rapl snd_hda_codec_realtek intel_powerclamp kvm_intel snd_hda_codec_generic ledtrig_audio kvm irqbypass cfg80211 i915 crct10dif_pclmul crc32_pclmul crc32c_intel evdev psmouse ghash_clmulni_intel cec serio_raw rc_core intel_cstate drm_kms_helper snd_hda_intel drm snd_hda_codec intel_gtt agpgart ac snd_hda_core snd_hwdep i2c_algo_bit fb_sys_fops syscopyarea snd_pcm sysfillrect sysimgblt wmi tpm_crb fan thermal tpm_tis battery i2c_hid hid i2c_i801 tpm_tis_core i2c_core video button tpm sdhci_pci dell_rbtn cqhci sdhci mei_txe int3400_thermal snd_timer snd acpi_thermal_rel xhci_pci mmc_core pinctrl_cherryview lpc_ich mei soundcore xhci_hcd processor_thermal_device rfkill int340x_thermal_zone intel_soc_dts_iosf
[   12.736661]  pcc_cpufreq loop
[   12.736670] CPU: 0 PID: 29 Comm: kworker/u4:1 Not tainted 5.2.8 #1
[   12.736673] Hardware name: Dell Inc. Inspiron 15-3552/001T3K, BIOS 4.4.0 03/06/2018
[   12.736683] Workqueue: events_unbound async_run_entry_fn
[   12.736827] RIP: 0010:vlv_wait_port_ready+0x99/0xe0 [i915]
[   12.736832] Code: 01 00 00 00 49 8b 87 68 08 00 00 e8 01 19 a5 c2 8b 73 74 44 89 ea 44 89 e1 21 c2 48 c7 c7 30 db 86 c0 83 c6 41 e8 86 01 92 c1 <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 8b 87 c0 06 00 00 41 c1 e4
[   12.736835] RSP: 0018:ffffbef580747898 EFLAGS: 00010282
[   12.736840] RAX: 0000000000000000 RBX: ffffa01376d67000 RCX: 000000000000003b
[   12.736842] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffffffff843086f0
[   12.736845] RBP: 0000000000186014 R08: 00000002f724781b R09: ffffffff843086f4
[   12.736847] R10: 000000000000044d R11: 000000000002988c R12: 00000000000000e0
[   12.736850] R13: 00000000000000f0 R14: ffffa01376768808 R15: ffffa01376768000
[   12.736856] FS:  0000000000000000(0000) GS:ffffa0137ba00000(0000) knlGS:0000000000000000
[   12.736859] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   12.736861] CR2: 00007ff9d4152200 CR3: 000000017324a000 CR4: 00000000001006f0
[   12.736865] Call Trace:
[   12.737017]  intel_enable_dp+0x261/0x330 [i915]
[   12.737160]  chv_pre_enable_dp+0x26/0x40 [i915]
[   12.737301]  intel_encoders_pre_enable.isra.0+0x65/0x80 [i915]
[   12.737443]  valleyview_crtc_enable+0xe8/0x210 [i915]
[   12.737587]  intel_update_crtc+0x5c/0x370 [i915]
[   12.737618]  ? release_crtc_commit+0x12/0x30 [drm_kms_helper]
[   12.737759]  intel_update_crtcs+0x4e/0x70 [i915]
[   12.737901]  intel_atomic_commit_tail+0x3aa/0x1300 [i915]
[   12.737914]  ? flush_workqueue+0x193/0x420
[   12.738055]  intel_atomic_commit+0x272/0x2b0 [i915]
[   12.738082]  restore_fbdev_mode_atomic+0x170/0x1e0 [drm_kms_helper]
[   12.738109]  drm_fb_helper_restore_fbdev_mode_unlocked+0x49/0xa0 [drm_kms_helper]
[   12.738134]  drm_fb_helper_set_par+0x2c/0x50 [drm_kms_helper]
[   12.738273]  intel_fbdev_set_par+0x16/0x50 [i915]
[   12.738285]  fbcon_init+0x4bd/0x600
[   12.738295]  visual_init+0xce/0x130
[   12.738305]  do_bind_con_driver+0x1b8/0x2b0
[   12.738312]  do_take_over_console+0x115/0x180
[   12.738320]  do_fbcon_takeover+0x58/0xb0
[   12.738327]  notifier_call_chain+0x4c/0x70
[   12.738333]  blocking_notifier_call_chain+0x48/0x60
[   12.738341]  register_framebuffer+0x20e/0x320
[   12.738368]  __drm_fb_helper_initial_config_and_unlock+0x2ee/0x430 [drm_kms_helper]
[   12.738509]  intel_fbdev_initial_config+0x14/0x30 [i915]
[   12.738516]  async_run_entry_fn+0x37/0xe0
[   12.738526]  process_one_work+0x1b4/0x3d0
[   12.738534]  worker_thread+0x4a/0x3c0
[   12.738544]  kthread+0xf9/0x130
[   12.738551]  ? trace_event_raw_event_workqueue_execute_start+0xb0/0xb0
[   12.738555]  ? kthread_park+0x80/0x80
[   12.738563]  ret_from_fork+0x35/0x40
[   12.738573] ---[ end trace 2110e46a1a3c504a ]---
[   12.738772] [drm:edp_panel_vdd_on [i915]] Turning eDP port C VDD on
[   12.738919] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[   12.739273] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a
[   12.740217] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
[   12.740356] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[   12.740528] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
[   12.741379] [drm:intel_dp_start_link_train [i915]] clock recovery OK
[   12.741539] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
[   12.742647] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
[   12.742724] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:92:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 1
[   12.742984] [drm:intel_enable_pipe [i915]] enabling pipe A
[   12.743085] [drm:intel_edp_backlight_on [i915]] 
[   12.743160] [drm:intel_panel_enable_backlight [i915]] pipe A
[   12.743237] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 6009
[   12.759883] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is enabled (was disabled)
[   12.760025] [drm:verify_connector_state.isra.0 [i915]] [CONNECTOR:92:eDP-1]
[   12.760172] [drm:intel_atomic_commit_tail [i915]] [CRTC:46:pipe A]
[   12.760553] [drm:intel_atomic_commit_tail [i915]] [CRTC:63:pipe B]
[   12.760672] Console: switching to colour frame buffer device 170x48
[   12.765204] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[   12.817063] media: Linux media interface: v0.10
[   12.819055] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[   12.867513] usbcore: registered new interface driver usbhid
[   12.884731] usbcore: registered new interface driver rtsx_usb
[   12.886247] usbhid: USB HID core driver
[   12.991470] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:045E:0745.0001/input/input13
[   12.992642] [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] 
[   12.997564] [drm:drm_setup_crtcs [drm_kms_helper]] 
[   12.997628] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:eDP-1]
[   12.997716] [drm:intel_dp_detect [i915]] [CONNECTOR:92:eDP-1]
[   12.997764] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000
[   12.997807] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
[   12.997851] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
[   12.998470] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[   12.998534] [drm:intel_dp_detect [i915]] MST support? port C: no, sink: no, modparam: yes
[   12.999053] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   12.999252] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[   12.999272] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   12.999362] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:eDP-1] probed modes :
[   12.999383] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 70120 1366 1414 1446 1485 768 771 777 787 0x48 0x9
[   12.999402] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 48 60500 1366 1414 1446 1551 768 771 777 813 0x40 0x9
[   12.999414] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-1]
[   12.999487] [drm:intel_dp_detect [i915]] [CONNECTOR:82:DP-1]
[   12.999506] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-1] disconnected
[   12.999517] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-1]
[   12.999561] [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-1]
[   13.000569] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[   13.000630] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[   13.000848] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[   13.000888] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   13.000931] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   13.000975] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[   13.001910] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   13.001953] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[   13.002181] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[   13.002224] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[   13.002431] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[   13.002449] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   13.002461] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-1] disconnected
[   13.002476] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:97:DP-2]
[   13.002521] [drm:intel_dp_detect [i915]] [CONNECTOR:97:DP-2]
[   13.002560] [drm:intel_power_well_enable [i915]] enabling dpio-common-d
[   13.002705] [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY1 (PHY_CONTROL=0x150707ff)
[   13.005868] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.008435] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.010999] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.020477] videodev: Linux video capture interface: v2.00
[   13.021211] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.024931] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.027498] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.030092] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.032657] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.035222] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.037789] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.040353] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.042915] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.045478] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.048041] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.049626] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:14.0-2.4/input0
[   13.053206] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.053858] input: Microsoft Microsoft® Nano Transceiver v2.0 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:045E:0745.0002/input/input14
[   13.055786] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.058568] input: Microsoft Microsoft® Nano Transceiver v2.0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:045E:0745.0002/input/input15
[   13.058856] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.065292] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.067868] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.070534] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.073124] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.075688] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.078253] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.080829] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.083392] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.086136] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.088705] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.091269] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.093869] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.096059] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[   13.096438] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.100738] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.103300] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.103330] [drm:drm_dp_dpcd_access [drm_kms_helper]] Too many retries, giving up. First error: -110
[   13.103370] [drm:intel_power_well_disable [i915]] disabling dpio-common-d
[   13.103437] [drm:chv_dpio_cmn_power_well_disable [i915]] Disabled DPIO PHY1 (PHY_CONTROL=0x150707fd)
[   13.103474] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:97:DP-2] disconnected
[   13.103489] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2]
[   13.103534] [drm:intel_hdmi_detect [i915]] [CONNECTOR:100:HDMI-A-2]
[   13.114067] Bluetooth: hci0: Intel firmware patch completed and activated
[   13.116710] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:14.0-2.4/input1
[   13.127116] input: Microsoft Microsoft® Nano Transceiver v2.0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:045E:0745.0003/input/input16
[   13.154405] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[   13.170337] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel
[   13.170401] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   13.170444] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
[   13.186318] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel
[   13.186362] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
[   13.189530] input: Microsoft Microsoft® Nano Transceiver v2.0 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:045E:0745.0003/input/input18
[   13.196703] hid-generic 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:14.0-2.4/input2
[   13.238374] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[   13.254890] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   13.254905] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2] disconnected
[   13.254922] [drm:drm_setup_crtcs [drm_kms_helper]] connector 92 enabled? yes
[   13.254931] [drm:drm_setup_crtcs [drm_kms_helper]] connector 82 enabled? no
[   13.254941] [drm:drm_setup_crtcs [drm_kms_helper]] connector 87 enabled? no
[   13.254951] [drm:drm_setup_crtcs [drm_kms_helper]] connector 97 enabled? no
[   13.254960] [drm:drm_setup_crtcs [drm_kms_helper]] connector 100 enabled? no
[   13.254977] [drm:drm_setup_crtcs [drm_kms_helper]] Not using firmware configuration
[   13.254988] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 92
[   13.254998] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 92 0
[   13.255007] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1366x768
[   13.255017] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1366x768 config
[   13.255033] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 46 (0,0)
[   13.260497] [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] 
[   13.260513] [drm:drm_setup_crtcs [drm_kms_helper]] 
[   13.260531] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:eDP-1]
[   13.260621] [drm:intel_dp_detect [i915]] [CONNECTOR:92:eDP-1]
[   13.260693] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000
[   13.260760] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
[   13.260827] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
[   13.261320] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[   13.261392] [drm:intel_dp_detect [i915]] MST support? port C: no, sink: no, modparam: yes
[   13.261805] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   13.261835] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[   13.261854] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   13.261924] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:eDP-1] probed modes :
[   13.261945] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 70120 1366 1414 1446 1485 768 771 777 787 0x48 0x9
[   13.261964] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 48 60500 1366 1414 1446 1551 768 771 777 813 0x40 0x9
[   13.261975] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-1]
[   13.262036] [drm:intel_dp_detect [i915]] [CONNECTOR:82:DP-1]
[   13.262050] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-1] disconnected
[   13.262060] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-1]
[   13.262104] [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-1]
[   13.262338] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[   13.262381] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[   13.262609] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[   13.262638] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   13.262681] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   13.262730] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[   13.263632] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   13.263676] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[   13.263895] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[   13.263946] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[   13.264164] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[   13.264182] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   13.264196] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-1] disconnected
[   13.264211] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:97:DP-2]
[   13.264264] [drm:intel_dp_detect [i915]] [CONNECTOR:97:DP-2]
[   13.264319] [drm:intel_power_well_enable [i915]] enabling dpio-common-d
[   13.264514] [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY1 (PHY_CONTROL=0x150707ff)
[   13.267797] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.270373] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.273136] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.275712] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.278273] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.280840] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.283742] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.286681] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.289256] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.291836] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.294397] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.296961] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.299522] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.302083] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.304784] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.307350] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.309910] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.312471] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.315032] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.317595] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.320156] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.322718] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.325277] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.329893] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.332482] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.332655] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6710)
[   13.337441] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.340004] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.342570] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.345133] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.347701] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.350750] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.353465] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   13.353567] [drm:drm_dp_dpcd_access [drm_kms_helper]] Too many retries, giving up. First error: -110
[   13.353610] [drm:intel_power_well_disable [i915]] disabling dpio-common-d
[   13.353763] [drm:chv_dpio_cmn_power_well_disable [i915]] Disabled DPIO PHY1 (PHY_CONTROL=0x150707fd)
[   13.353801] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:97:DP-2] disconnected
[   13.353817] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2]
[   13.353861] [drm:intel_hdmi_detect [i915]] [CONNECTOR:100:HDMI-A-2]
[   13.390673] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[   13.395046] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[   13.399320] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[   13.403595] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[   13.406328] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[   13.417098] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19
[   13.422326] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel
[   13.428739] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   13.428783] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
[   13.430640] usbcore: registered new interface driver uvcvideo
[   13.433579] USB Video Class driver (1.1.1)
[   13.444332] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel
[   13.444397] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
[   13.495800] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[   13.511323] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   13.511337] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2] disconnected
[   13.511352] [drm:drm_setup_crtcs [drm_kms_helper]] connector 92 enabled? yes
[   13.511362] [drm:drm_setup_crtcs [drm_kms_helper]] connector 82 enabled? no
[   13.511371] [drm:drm_setup_crtcs [drm_kms_helper]] connector 87 enabled? no
[   13.511381] [drm:drm_setup_crtcs [drm_kms_helper]] connector 97 enabled? no
[   13.511390] [drm:drm_setup_crtcs [drm_kms_helper]] connector 100 enabled? no
[   13.511409] [drm:drm_setup_crtcs [drm_kms_helper]] Not using firmware configuration
[   13.511420] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 92
[   13.511430] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 92 0
[   13.511440] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1366x768
[   13.511449] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1366x768 config
[   13.511465] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 46 (0,0)
[   14.507108] hpet1: lost 9600 rtc interrupts
[   15.157732] EXT4-fs (sda1): re-mounted. Opts: (null)
[   16.496761] Adding 1048572k swap on /swapfile.  Priority:1 extents:1 across:1048572k FS
[   16.804468] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port C VDD off
[   16.804610] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[   26.788963] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.788967] Bluetooth: BNEP filters: protocol multicast
[   26.788980] Bluetooth: BNEP socket layer initialized
[   31.430541] NET: Registered protocol family 10
[   31.456068] Segment Routing with IPv6
[   33.726499] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[   33.807667] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[   33.810581] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[   33.847633] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[   33.927404] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[   33.929004] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[   52.919765] FS-Cache: Loaded
[   53.109690] FS-Cache: Netfs 'cifs' registered for caching
[   53.111349] Key type cifs.spnego registered
[   53.111358] Key type cifs.idmap registered
[   53.111844] CIFS: Attempting to mount //10.7.0.45/SYS
[   53.128246] CIFS: Attempting to mount //10.7.0.45/MOM
[   53.144986] CIFS: Attempting to mount //10.7.0.45/KIDS
[   53.205109] CIFS: Attempting to mount //10.7.0.45/ROKU
[   53.332658] CIFS: Attempting to mount //10.7.0.45/MUSIC
[   57.017162] [drm:drm_mode_addfb2 [drm]] [FB:102]
[   57.018357] [drm:intel_framebuffer_init [i915]] No Y tiling for legacy addfb
[   57.018386] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer
[   57.018455] [drm:intel_framebuffer_init [i915]] unsupported pixel format XR24 little-endian (0x34325258) / modifier 0x100000000000002
[   57.018475] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer
[   57.706215] [drm:drm_mode_addfb2 [drm]] [FB:102]
[   59.033602] [drm:drm_mode_setcrtc [drm]] [CRTC:46:pipe A]
[   59.033636] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:92:eDP-1]
[   59.084616] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:eDP-1]
[   59.084714] [drm:intel_dp_detect [i915]] [CONNECTOR:92:eDP-1]
[   59.084786] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000
[   59.084853] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
[   59.084920] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
[   59.085001] [drm:edp_panel_vdd_on [i915]] Turning eDP port C VDD on
[   59.085081] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[   59.085756] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[   59.085827] [drm:intel_dp_detect [i915]] MST support? port C: no, sink: no, modparam: yes
[   59.086513] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   59.086542] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[   59.086562] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   59.086620] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:eDP-1] probed modes :
[   59.086641] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 70120 1366 1414 1446 1485 768 771 777 787 0x48 0x9
[   59.086660] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 48 60500 1366 1414 1446 1551 768 771 777 813 0x40 0x9
[   59.087253] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-1]
[   59.087318] [drm:intel_dp_detect [i915]] [CONNECTOR:82:DP-1]
[   59.087362] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-1] disconnected
[   59.087386] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:97:DP-2]
[   59.087431] [drm:intel_dp_detect [i915]] [CONNECTOR:97:DP-2]
[   59.087469] [drm:intel_power_well_enable [i915]] enabling dpio-common-d
[   59.087667] [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY1 (PHY_CONTROL=0x150707ff)
[   59.090895] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.093531] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.096113] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.098678] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.101243] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.103889] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.106457] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.109022] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.111587] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.114151] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.116717] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.119284] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.121878] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.124442] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.127006] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.129572] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.132137] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.134700] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.137265] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.139873] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.142439] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.145003] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.147567] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.150130] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.152698] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.155262] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.157870] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.160435] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.162999] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.165563] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.168128] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.170693] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   59.170714] [drm:drm_dp_dpcd_access [drm_kms_helper]] Too many retries, giving up. First error: -110
[   59.170755] [drm:intel_power_well_disable [i915]] disabling dpio-common-d
[   59.170912] [drm:chv_dpio_cmn_power_well_disable [i915]] Disabled DPIO PHY1 (PHY_CONTROL=0x150707fd)
[   59.170951] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:97:DP-2] disconnected
[   59.171002] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-1]
[   59.171051] [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-1]
[   59.171271] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[   59.171326] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[   59.171595] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[   59.171636] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   59.171682] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   59.171725] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[   59.172723] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   59.172771] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[   59.172987] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[   59.173030] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[   59.173236] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[   59.173253] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   59.173265] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-1] disconnected
[   59.173487] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2]
[   59.173543] [drm:intel_hdmi_detect [i915]] [CONNECTOR:100:HDMI-A-2]
[   59.224649] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[   59.240328] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel
[   59.240374] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   59.240418] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
[   59.256315] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel
[   59.256361] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
[   59.307660] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[   59.323317] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   59.323331] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2] disconnected
[   59.324284] [drm:vlv_compute_pipe_wm [i915]] cursor A watermarks: PM2=63, PM5=63, DDR DVFS=63
[   62.628394] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port C VDD off
[   62.628475] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[   67.214140] [drm:vlv_compute_pipe_wm [i915]] cursor A watermarks: PM2=0, PM5=0, DDR DVFS=0
[   96.030269] [drm:vlv_compute_pipe_wm [i915]] cursor A watermarks: PM2=63, PM5=63, DDR DVFS=63
[   96.276077] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:eDP-1]
[   96.276156] [drm:intel_dp_detect [i915]] [CONNECTOR:92:eDP-1]
[   96.276205] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000
[   96.276248] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
[   96.276291] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
[   96.276364] [drm:edp_panel_vdd_on [i915]] Turning eDP port C VDD on
[   96.276418] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[   96.277255] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[   96.277315] [drm:intel_dp_detect [i915]] MST support? port C: no, sink: no, modparam: yes
[   96.277725] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   96.277755] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[   96.277774] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   96.277837] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:eDP-1] probed modes :
[   96.277858] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 70120 1366 1414 1446 1485 768 771 777 787 0x48 0x9
[   96.277877] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 48 60500 1366 1414 1446 1551 768 771 777 813 0x40 0x9
[   96.278237] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-1]
[   96.278301] [drm:intel_dp_detect [i915]] [CONNECTOR:82:DP-1]
[   96.278347] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-1] disconnected
[   96.278369] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:97:DP-2]
[   96.278413] [drm:intel_dp_detect [i915]] [CONNECTOR:97:DP-2]
[   96.278452] [drm:intel_power_well_enable [i915]] enabling dpio-common-d
[   96.279350] [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY1 (PHY_CONTROL=0x150707ff)
[   96.282642] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.285234] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.287861] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.290526] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.293097] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.295710] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.298286] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.301043] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.303618] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.306186] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.308764] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.311444] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.314032] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.316605] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.319174] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.321743] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.324317] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.326955] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.329555] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.332128] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.334794] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.337521] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.340145] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.342783] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.345542] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.348229] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.350833] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.353436] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.356019] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.358595] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.361168] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.363741] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450064
[   96.363763] [drm:drm_dp_dpcd_access [drm_kms_helper]] Too many retries, giving up. First error: -110
[   96.363803] [drm:intel_power_well_disable [i915]] disabling dpio-common-d
[   96.363871] [drm:chv_dpio_cmn_power_well_disable [i915]] Disabled DPIO PHY1 (PHY_CONTROL=0x150707fd)
[   96.363909] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:97:DP-2] disconnected
[   96.363979] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-1]
[   96.364024] [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-1]
[   96.364242] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[   96.364284] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[   96.364501] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[   96.364535] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   96.364582] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   96.364626] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[   96.365527] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   96.365571] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[   96.365962] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[   96.366005] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[   96.366218] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[   96.366233] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   96.366244] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:HDMI-A-1] disconnected
[   96.366297] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2]
[   96.366343] [drm:intel_hdmi_detect [i915]] [CONNECTOR:100:HDMI-A-2]
[   96.418222] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[   96.434329] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel
[   96.434374] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   96.434418] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
[   96.451341] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel
[   96.451430] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
[   96.502368] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[   96.531730] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   96.531746] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2] disconnected
[   99.812375] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port C VDD off
[   99.812430] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[  117.764586] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
[  119.561333] Bluetooth: RFCOMM TTY layer initialized
[  119.561345] Bluetooth: RFCOMM socket layer initialized
[  119.561361] Bluetooth: RFCOMM ver 1.11
[  160.517729] wlan0: authenticate with 60:38:e0:94:04:16
[  160.524969] wlan0: send auth to 60:38:e0:94:04:16 (try 1/3)
[  160.526907] wlan0: authenticated
[  160.528507] wlan0: associate with 60:38:e0:94:04:16 (try 1/3)
[  160.533162] wlan0: RX AssocResp from 60:38:e0:94:04:16 (capab=0x411 status=0 aid=4)
[  160.535339] wlan0: associated
[  160.608294] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  160.613958] wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by 60:38:e0:94:04:16
[  160.736693] 8021q: 802.1Q VLAN Support v1.8

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Intel-gfx] Linux Kernel 5.2.8 (uvc or i915?)
  2019-08-16 21:08     ` Nathaniel Russell
@ 2019-08-21 11:48       ` Jani Nikula
  0 siblings, 0 replies; 7+ messages in thread
From: Jani Nikula @ 2019-08-21 11:48 UTC (permalink / raw)
  To: Nathaniel Russell
  Cc: Randy Dunlap, linux-kernel, dri-devel, intel-gfx,
	Laurent Pinchart, linux-media

On Fri, 16 Aug 2019, Nathaniel Russell <naterussell83@gmail.com> wrote:
> Here is the file you requested with the debug information

Please attach it to the bug you've hopefully created.

BR,
Jani.

-- 
Jani Nikula, Intel Open Source Graphics Center

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2019-08-21 11:48 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <CAONH+Jm-O6=DQ+K2n5pNTNMg2Sq1KcVNFLuweVh6W82OPEFJoQ@mail.gmail.com>
2019-08-16  1:53 ` Linux Kernel 5.2.8 (uvc or i915?) Randy Dunlap
     [not found]   ` <CAONH+JnZpbpdiwdajP7ke7X7wQGU7m4YoyZRDbLHKmRufkD6mQ@mail.gmail.com>
2019-08-16  3:10     ` Linux Kernel 5.2.8 (uvc or i915? <<<) Randy Dunlap
2019-08-16  9:58       ` Laurent Pinchart
2019-08-16 21:35         ` Nathaniel Russell
2019-08-16 13:47   ` [Intel-gfx] Linux Kernel 5.2.8 (uvc or i915?) Jani Nikula
2019-08-16 21:08     ` Nathaniel Russell
2019-08-21 11:48       ` Jani Nikula

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).