From: Dave Stevenson <dave.stevenson@raspberrypi.com>
To: Jacopo Mondi <jacopo@jmondi.org>
Cc: paul.j.murphy@intel.com, daniele.alessandrelli@intel.com,
linux-media@vger.kernel.org
Subject: Re: [PATCH 07/16] media: i2c: ov9282: Reduce vblank_min values based on testing
Date: Thu, 6 Oct 2022 14:02:54 +0100 [thread overview]
Message-ID: <CAPY8ntAJuNDfb5UozD22qzBBcecQEJqWh2qTf+85yLonn6kS5Q@mail.gmail.com> (raw)
In-Reply-To: <20221006115610.zwyocdduhexusfyb@uno.localdomain>
Hi Jacopo
On Thu, 6 Oct 2022 at 12:56, Jacopo Mondi <jacopo@jmondi.org> wrote:
>
> Hi Dave,
>
> On Wed, Oct 05, 2022 at 04:28:00PM +0100, Dave Stevenson wrote:
> > The configured vblank_min setting of 250 (meaning VTS of
>
> Do you mean 151 ?
I did. Misread hblank for vblank.
Dave
> > 720 + 250 = 970) is far higher than the setting that works on
> > the sensor, and there are no obvious restrictions stated in the
> > datasheet.
> >
> > Reduce the vblank_min to allow for faster frame rates.
> >
> > Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> > ---
> > drivers/media/i2c/ov9282.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
> > index 1cd6cb4addfb..abb1223c0260 100644
> > --- a/drivers/media/i2c/ov9282.c
> > +++ b/drivers/media/i2c/ov9282.c
> > @@ -268,7 +268,7 @@ static const struct ov9282_mode supported_modes[] = {
> > .height = 720,
> > .hblank = 250,
> > .vblank = 1022,
> > - .vblank_min = 151,
> > + .vblank_min = 41,
> > .vblank_max = 51540,
> > .link_freq_idx = 0,
> > .reg_list = {
> > --
> > 2.34.1
> >
next prev parent reply other threads:[~2022-10-06 13:03 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-05 15:27 [PATCH 00/16] Updates to ov9282 sensor driver Dave Stevenson
2022-10-05 15:27 ` [PATCH 01/16] media: i2c: ov9282: Remove duplication of registers Dave Stevenson
2022-10-06 9:14 ` Jacopo Mondi
2022-10-05 15:27 ` [PATCH 02/16] media: i2c: ov9282: Split registers into common and mode specific Dave Stevenson
2022-10-06 9:15 ` Jacopo Mondi
2022-10-05 15:27 ` [PATCH 03/16] media: i2c: ov9282: Remove format code from the mode Dave Stevenson
2022-10-06 9:15 ` Jacopo Mondi
2022-10-05 15:27 ` [PATCH 04/16] media: i2c: ov9282: Remove pixel rate from mode definition Dave Stevenson
2022-10-06 9:17 ` Jacopo Mondi
2022-10-06 11:51 ` Dave Stevenson
2022-10-05 15:27 ` [PATCH 05/16] media: i2c: ov9281: Support more than 1 mode Dave Stevenson
2022-10-06 9:18 ` Jacopo Mondi
2022-10-26 7:22 ` Sakari Ailus
2022-10-05 15:27 ` [PATCH 06/16] media: i2c: ov9282: Correct HTS register for configured pixel rate Dave Stevenson
2022-10-06 9:23 ` Jacopo Mondi
2022-10-06 13:01 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 07/16] media: i2c: ov9282: Reduce vblank_min values based on testing Dave Stevenson
2022-10-06 11:56 ` Jacopo Mondi
2022-10-06 13:02 ` Dave Stevenson [this message]
2022-10-05 15:28 ` [PATCH 08/16] media: i2c: ov9282: Add selection for CSI2 clock mode Dave Stevenson
2022-10-06 9:24 ` Jacopo Mondi
2022-10-26 7:21 ` Sakari Ailus
2022-10-28 12:57 ` Dave Stevenson
2022-10-28 14:30 ` Sakari Ailus
2022-10-28 15:03 ` Dave Stevenson
2022-10-31 13:06 ` Sakari Ailus
2022-10-05 15:28 ` [PATCH 09/16] media: i2c: ov9282: Add the properties from fwnode Dave Stevenson
2022-10-06 11:57 ` Jacopo Mondi
2022-10-05 15:28 ` [PATCH 10/16] media: i2c: ov9282: Action CID_VBLANK when set Dave Stevenson
2022-10-06 9:29 ` Jacopo Mondi
2022-10-06 13:21 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 11/16] media: i2c: ov9282: Add HFLIP and VFLIP support Dave Stevenson
2022-10-06 9:38 ` Jacopo Mondi
2022-10-06 14:21 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 12/16] media: i2c: ov9282: Make V4L2_CID_HBLANK r/w Dave Stevenson
2022-10-06 9:41 ` Jacopo Mondi
2022-10-06 11:33 ` Dave Stevenson
2022-10-06 11:53 ` Jacopo Mondi
2022-10-05 15:28 ` [PATCH 13/16] media: i2c: ov9282: Add selection API calls for cropping info Dave Stevenson
2022-10-06 9:43 ` Jacopo Mondi
2022-10-06 11:39 ` Dave Stevenson
2022-10-06 11:54 ` Jacopo Mondi
2022-10-05 15:28 ` [PATCH 14/16] media: i2c: ov9282: Add support for 1280x800 and 640x400 modes Dave Stevenson
2022-10-06 9:48 ` Jacopo Mondi
2022-10-06 11:46 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 15/16] media: i2c: ov9282: Add support for 8bit readout Dave Stevenson
2022-10-06 9:57 ` Jacopo Mondi
2022-10-06 12:20 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 16/16] media: i2c: ov9282: Support event handlers Dave Stevenson
2022-10-06 9:59 ` Jacopo Mondi
2022-10-07 10:22 ` Dave Stevenson
2022-10-07 12:57 ` Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAPY8ntAJuNDfb5UozD22qzBBcecQEJqWh2qTf+85yLonn6kS5Q@mail.gmail.com \
--to=dave.stevenson@raspberrypi.com \
--cc=daniele.alessandrelli@intel.com \
--cc=jacopo@jmondi.org \
--cc=linux-media@vger.kernel.org \
--cc=paul.j.murphy@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).