* [PATCH] [media] rc-core support for Microsoft IR keyboard/mouse
@ 2011-06-03 21:28 Jarod Wilson
2011-06-04 17:52 ` Jarod Wilson
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Jarod Wilson @ 2011-06-03 21:28 UTC (permalink / raw)
To: linux-media; +Cc: Jarod Wilson
This is a custom IR protocol decoder, for the RC-6-ish protocol used by
the Microsoft Remote Keyboard.
http://www.amazon.com/Microsoft-Remote-Keyboard-Windows-ZV1-00004/dp/B000AOAAN8
Its a standard keyboard with embedded thumb stick mouse pointer and
mouse buttons, along with a number of media keys. The media keys are
standard RC-6, identical to the signals from the stock MCE remotes, and
will be handled as such. The keyboard and mouse signals will be decoded
and delivered to the system by an input device registered specifically
by this driver.
Successfully tested with an mceusb-driven receiver, but this should
actually work with any raw IR rc-core receiver.
This work is inspired by lirc_mod_mce:
http://mod-mce.sourceforge.net/
The documentation there and code aided in understanding and decoding the
protocol, but the bulk of the code is actually borrowed more from the
existing in-kernel decoders than anything. I did recycle the keyboard
keycode table and a few defines from lirc_mod_mce though.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
---
drivers/media/rc/Kconfig | 11 +
drivers/media/rc/Makefile | 1 +
drivers/media/rc/ir-mce_kbd-decoder.c | 383 +++++++++++++++++++++++++++++++++
drivers/media/rc/ir-raw.c | 1 +
drivers/media/rc/rc-core-priv.h | 17 ++
drivers/media/rc/rc-main.c | 1 +
include/media/rc-map.h | 3 +-
7 files changed, 416 insertions(+), 1 deletions(-)
create mode 100644 drivers/media/rc/ir-mce_kbd-decoder.c
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 7d4bbc2..899f783 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -87,6 +87,17 @@ config IR_RC5_SZ_DECODER
uses an IR protocol that is almost standard RC-5, but not quite,
as it uses an additional bit).
+config IR_MCE_KBD_DECODER
+ tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
+ depends on RC_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have a Microsoft Remote Keyboard for
+ Windows Media Center Edition, which you would like to use with
+ a raw IR receiver in your system.
+
config IR_LIRC_CODEC
tristate "Enable IR to LIRC bridge"
depends on RC_CORE
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 52830e5..f224db0 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o
obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o
obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o
obj-$(CONFIG_IR_RC5_SZ_DECODER) += ir-rc5-sz-decoder.o
+obj-$(CONFIG_IR_MCE_KBD_DECODER) += ir-mce_kbd-decoder.o
obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
# stand-alone IR receivers/transmitters
diff --git a/drivers/media/rc/ir-mce_kbd-decoder.c b/drivers/media/rc/ir-mce_kbd-decoder.c
new file mode 100644
index 0000000..98d3bf5
--- /dev/null
+++ b/drivers/media/rc/ir-mce_kbd-decoder.c
@@ -0,0 +1,383 @@
+/* ir-mce_kbd-decoder.c - A decoder for the RC6-ish keyboard/mouse IR protocol
+ * used by the Microsoft Remote Keyboard for Windows Media Center Edition
+ *
+ * Copyright (C) 2011 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "rc-core-priv.h"
+
+/*
+ * This decoder currently supports:
+ * - RC6-like 29-bit IR signals used for mouse movement and buttons
+ * - RC6-like 32-bit IR signals used for standard keyboard keys
+ *
+ * The media keys on the keyboard send RC-6 signals that are inditinguishable
+ * from the keys of the same name on the stock MCE remote, and will be handled
+ * by the standard RC-6 decoder, and be made available to the system via the
+ * input device for the remote, rather than the keyboard/mouse one.
+ */
+
+#define MCE_KBD_UNIT 333333 /* ns */
+#define MCE_KBD_HEADER_NBITS 5
+#define MCE_KBD_MOUSE_NBITS 29
+#define MCE_KBD_KEYBOARD_NBITS 32
+#define MCE_KBD_PREFIX_PULSE (8 * MCE_KBD_UNIT)
+#define MCE_KBD_PREFIX_SPACE (1 * MCE_KBD_UNIT)
+#define MCE_KBD_MAX_LEN (3 * MCE_KBD_UNIT)
+#define MCE_KBD_BIT_START (1 * MCE_KBD_UNIT)
+#define MCE_KBD_BIT_END (1 * MCE_KBD_UNIT)
+#define MCE_KBD_BIT_0 (1 * MCE_KBD_UNIT)
+#define MCE_KBD_BIT_SET (2 * MCE_KBD_UNIT)
+#define MCE_KBD_MODE_MASK 0xf /* for the header bits */
+#define MCE_KBD_HEADER 0x4
+#define MCE_MOUSE_HEADER 0x1
+#define MCE_KBD_MASK_KEYS_START 0xe0
+
+enum mce_kbd_mode {
+ MCE_KBD_MODE_KEYBOARD,
+ MCE_KBD_MODE_MOUSE,
+ MCE_KBD_MODE_UNKNOWN,
+};
+
+enum mce_kbd_state {
+ STATE_INACTIVE,
+ STATE_HEADER_BIT_START,
+ STATE_HEADER_BIT_END,
+ STATE_BODY_BIT_START,
+ STATE_BODY_BIT_END,
+ STATE_FINISHED,
+};
+
+static unsigned char kbd_keycodes[256] = {
+ 0, 0, 0, 0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38,
+ 50, 49, 24, 25, 16, 19, 31, 20, 22, 47, 17, 45, 21, 44, 2, 3,
+ 4, 5, 6, 7, 8, 9, 10, 11, 28, 1, 14, 15, 57, 12, 13, 26,
+ 27, 43, 43, 39, 40, 41, 51, 52, 53, 58, 59, 60, 61, 62, 63, 64,
+ 65, 66, 67, 68, 87, 88, 99, 70, 119, 110, 102, 104, 111, 107, 109, 106,
+ 105, 108, 103, 69, 98, 55, 74, 78, 96, 79, 80, 81, 75, 76, 77, 71,
+ 72, 73, 82, 83, 86, 127, 116, 117, 183, 184, 185, 186, 187, 188, 189, 190,
+ 191, 192, 193, 194, 134, 138, 130, 132, 128, 129, 131, 137, 133, 135, 136, 113,
+ 115, 114, 0, 0, 0, 121, 0, 89, 93, 124, 92, 94, 95, 0, 0, 0,
+ 122, 123, 90, 91, 85, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 29, 42, 56, 125, 97, 54, 100, 126, 164, 166, 165, 163, 161, 115, 114, 113,
+ 150, 158, 159, 128, 136, 177, 178, 176, 142, 152, 173, 140
+};
+
+static enum mce_kbd_mode mce_kbd_mode(struct mce_kbd_dec *data)
+{
+ switch (data->header & MCE_KBD_MODE_MASK) {
+ case MCE_KBD_HEADER:
+ return MCE_KBD_MODE_KEYBOARD;
+ case MCE_MOUSE_HEADER:
+ return MCE_KBD_MODE_MOUSE;
+ default:
+ return MCE_KBD_MODE_UNKNOWN;
+ }
+}
+
+static void ir_mce_kbd_process_keyboard_data(struct input_dev *idev,
+ u32 scancode)
+{
+ u8 keydata = (scancode >> 8) & 0xff;
+ u8 shiftmask = scancode & 0xff;
+ unsigned char keycode, maskcode;
+ int i, keystate;
+
+ IR_dprintk(1, "keyboard: keydata = 0x%02x, shiftmask = 0x%02x\n",
+ keydata, shiftmask);
+
+ for (i = 0; i < 7; i++) {
+ maskcode = kbd_keycodes[MCE_KBD_MASK_KEYS_START + i];
+ if (shiftmask & (1 << i))
+ keystate = 1;
+ else
+ keystate = 0;
+ input_report_key(idev, maskcode, keystate);
+ }
+
+ if (keydata) {
+ keycode = kbd_keycodes[keydata];
+ input_report_key(idev, keycode, 1);
+ } else {
+ for (i = 0; i < MCE_KBD_MASK_KEYS_START; i++)
+ input_report_key(idev, kbd_keycodes[i], 0);
+ }
+}
+
+static void ir_mce_kbd_process_mouse_data(struct input_dev *idev, u32 scancode)
+{
+ /* raw mouse coordinates */
+ u8 xdata = (scancode >> 7) & 0x7f;
+ u8 ydata = (scancode >> 14) & 0x7f;
+ int x, y;
+ /* mouse buttons */
+ bool right = scancode & 0x40;
+ bool left = scancode & 0x20;
+
+ if (xdata & 0x40)
+ x = -((~xdata & 0x7f) + 1);
+ else
+ x = xdata;
+
+ if (ydata & 0x40)
+ y = -((~ydata & 0x7f) + 1);
+ else
+ y = ydata;
+
+ IR_dprintk(1, "mouse: x = %d, y = %d, btns = %s%s\n",
+ x, y, left ? "L" : "", right ? "R" : "");
+
+ input_report_rel(idev, REL_X, x);
+ input_report_rel(idev, REL_Y, y);
+
+ input_report_key(idev, BTN_LEFT, left);
+ input_report_key(idev, BTN_RIGHT, right);
+}
+
+/**
+ * ir_mce_kbd_decode() - Decode one mce_kbd pulse or space
+ * @dev: the struct rc_dev descriptor of the device
+ * @ev: the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_mce_kbd_decode(struct rc_dev *dev, struct ir_raw_event ev)
+{
+ struct mce_kbd_dec *data = &dev->raw->mce_kbd;
+ u32 scancode;
+
+ if (!(dev->raw->enabled_protocols & RC_TYPE_MCE_KBD))
+ return 0;
+
+ if (!is_timing_event(ev)) {
+ if (ev.reset)
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
+
+ if (!geq_margin(ev.duration, MCE_KBD_UNIT, MCE_KBD_UNIT / 2))
+ goto out;
+
+again:
+ IR_dprintk(2, "started at state %i (%uus %s)\n",
+ data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+ if (!geq_margin(ev.duration, MCE_KBD_UNIT, MCE_KBD_UNIT / 2))
+ return 0;
+
+ switch (data->state) {
+
+ case STATE_INACTIVE:
+ if (!ev.pulse)
+ break;
+
+ /* Note: larger margin on first pulse since each MCE_KBD_UNIT
+ is quite short and some hardware takes some time to
+ adjust to the signal */
+ if (!eq_margin(ev.duration, MCE_KBD_PREFIX_PULSE, MCE_KBD_UNIT))
+ break;
+
+ data->state = STATE_HEADER_BIT_START;
+ data->count = 0;
+ data->header = 0;
+ return 0;
+
+ case STATE_HEADER_BIT_START:
+ if (geq_margin(ev.duration, MCE_KBD_MAX_LEN, MCE_KBD_UNIT / 2))
+ break;
+
+ data->header <<= 1;
+ if (ev.pulse)
+ data->header |= 1;
+ data->count++;
+ data->state = STATE_HEADER_BIT_END;
+ return 0;
+
+ case STATE_HEADER_BIT_END:
+ if (!is_transition(&ev, &dev->raw->prev_ev))
+ break;
+
+ decrease_duration(&ev, MCE_KBD_BIT_END);
+
+ if (data->count != MCE_KBD_HEADER_NBITS) {
+ data->state = STATE_HEADER_BIT_START;
+ goto again;
+ }
+
+ switch (mce_kbd_mode(data)) {
+ case MCE_KBD_MODE_KEYBOARD:
+ data->wanted_bits = MCE_KBD_KEYBOARD_NBITS;
+ break;
+ case MCE_KBD_MODE_MOUSE:
+ data->wanted_bits = MCE_KBD_MOUSE_NBITS;
+ break;
+ default:
+ IR_dprintk(1, "not keyboard or mouse data\n");
+ goto out;
+ }
+
+ data->count = 0;
+ data->body = 0;
+ data->state = STATE_BODY_BIT_START;
+ goto again;
+
+ case STATE_BODY_BIT_START:
+ if (geq_margin(ev.duration, MCE_KBD_MAX_LEN, MCE_KBD_UNIT / 2))
+ break;
+
+ data->body <<= 1;
+ if (ev.pulse)
+ data->body |= 1;
+ data->count++;
+ data->state = STATE_BODY_BIT_END;
+ return 0;
+
+ case STATE_BODY_BIT_END:
+ if (!is_transition(&ev, &dev->raw->prev_ev))
+ break;
+
+ if (data->count == data->wanted_bits)
+ data->state = STATE_FINISHED;
+ else
+ data->state = STATE_BODY_BIT_START;
+
+ decrease_duration(&ev, MCE_KBD_BIT_END);
+ goto again;
+
+ case STATE_FINISHED:
+ if (ev.pulse)
+ break;
+
+ switch (data->wanted_bits) {
+ case MCE_KBD_KEYBOARD_NBITS:
+ scancode = data->body & 0xffff;
+ IR_dprintk(1, "keyboard data 0x%08x\n", data->body);
+ /* Pass data to keyboard buffer parser */
+ ir_mce_kbd_process_keyboard_data(data->idev, scancode);
+ break;
+ case MCE_KBD_MOUSE_NBITS:
+ scancode = data->body & 0x1fffff;
+ IR_dprintk(1, "mouse data 0x%06x\n", scancode);
+ /* Pass data to mouse buffer parser */
+ ir_mce_kbd_process_mouse_data(data->idev, scancode);
+ break;
+ default:
+ IR_dprintk(1, "not keyboard or mouse data\n");
+ goto out;
+ }
+
+ data->state = STATE_INACTIVE;
+ input_sync(data->idev);
+ return 0;
+ }
+
+out:
+ IR_dprintk(1, "failed at state %i (%uus %s)\n",
+ data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+ data->state = STATE_INACTIVE;
+ input_sync(data->idev);
+ return -EINVAL;
+}
+
+static int ir_mce_kbd_register(struct rc_dev *dev)
+{
+ struct mce_kbd_dec *mce_kbd = &dev->raw->mce_kbd;
+ struct input_dev *idev;
+ int i, ret;
+
+ idev = input_allocate_device();
+ if (!idev)
+ return -ENOMEM;
+
+ snprintf(mce_kbd->name, sizeof(mce_kbd->name),
+ "MCE IR Keyboard/Mouse (%s)", dev->driver_name);
+ strlcat(mce_kbd->phys, "/input0", sizeof(mce_kbd->phys));
+
+ idev->name = mce_kbd->name;
+ idev->phys = mce_kbd->phys;
+
+ /* Keyboard bits */
+ set_bit(EV_KEY, idev->evbit);
+ set_bit(EV_REP, idev->evbit);
+ for (i = 0; i < sizeof(kbd_keycodes); i++)
+ set_bit(kbd_keycodes[i], idev->keybit);
+
+ /* Mouse bits */
+ set_bit(EV_REL, idev->evbit);
+ set_bit(REL_X, idev->relbit);
+ set_bit(REL_Y, idev->relbit);
+ set_bit(BTN_LEFT, idev->keybit);
+ set_bit(BTN_RIGHT, idev->keybit);
+
+ /* Report scancodes too */
+ set_bit(EV_MSC, idev->evbit);
+ set_bit(MSC_SCAN, idev->mscbit);
+
+ input_set_drvdata(idev, mce_kbd);
+
+#if 0
+ /* Adding this reference means two input devices are associated with
+ * this rc-core device, which ir-keytable doesn't cope with yet */
+ idev->dev.parent = &dev->dev;
+#endif
+
+ ret = input_register_device(idev);
+ if (ret < 0) {
+ input_free_device(idev);
+ return -EIO;
+ }
+
+ mce_kbd->idev = idev;
+
+ return 0;
+}
+
+static int ir_mce_kbd_unregister(struct rc_dev *dev)
+{
+ struct mce_kbd_dec *mce_kbd = &dev->raw->mce_kbd;
+ struct input_dev *idev = mce_kbd->idev;
+
+ input_unregister_device(idev);
+
+ return 0;
+}
+
+static struct ir_raw_handler mce_kbd_handler = {
+ .protocols = RC_TYPE_MCE_KBD,
+ .decode = ir_mce_kbd_decode,
+ .raw_register = ir_mce_kbd_register,
+ .raw_unregister = ir_mce_kbd_unregister,
+};
+
+static int __init ir_mce_kbd_decode_init(void)
+{
+ ir_raw_handler_register(&mce_kbd_handler);
+
+ printk(KERN_INFO "IR MCE Keyboard/mouse protocol handler initialized\n");
+ return 0;
+}
+
+static void __exit ir_mce_kbd_decode_exit(void)
+{
+ ir_raw_handler_unregister(&mce_kbd_handler);
+}
+
+module_init(ir_mce_kbd_decode_init);
+module_exit(ir_mce_kbd_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+MODULE_DESCRIPTION("MCE Keyboard/mouse IR protocol decoder");
diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c
index 11c19d8..f4efd2f 100644
--- a/drivers/media/rc/ir-raw.c
+++ b/drivers/media/rc/ir-raw.c
@@ -353,6 +353,7 @@ static void init_decoders(struct work_struct *work)
load_rc6_decode();
load_jvc_decode();
load_sony_decode();
+ load_mce_kbd_decode();
load_lirc_codec();
/* If needed, we may later add some init code. In this case,
diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h
index 873b387..e268254 100644
--- a/drivers/media/rc/rc-core-priv.h
+++ b/drivers/media/rc/rc-core-priv.h
@@ -84,6 +84,16 @@ struct ir_raw_event_ctrl {
unsigned count;
unsigned wanted_bits;
} rc5_sz;
+ struct mce_kbd_dec {
+ struct input_dev *idev;
+ char name[64];
+ char phys[64];
+ int state;
+ u8 header;
+ u32 body;
+ unsigned count;
+ unsigned wanted_bits;
+ } mce_kbd;
struct lirc_codec {
struct rc_dev *dev;
struct lirc_driver *drv;
@@ -182,6 +192,13 @@ void ir_raw_init(void);
#define load_sony_decode() 0
#endif
+/* from ir-mce_kbd-decoder.c */
+#ifdef CONFIG_IR_MCE_KBD_DECODER_MODULE
+#define load_mce_kbd_decode() request_module("ir-mce_kbd-decoder")
+#else
+#define load_mce_kbd_decode() 0
+#endif
+
/* from ir-lirc-codec.c */
#ifdef CONFIG_IR_LIRC_CODEC_MODULE
#define load_lirc_codec() request_module("ir-lirc-codec")
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index f57cd56..20048c3 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -733,6 +733,7 @@ static struct {
{ RC_TYPE_JVC, "jvc" },
{ RC_TYPE_SONY, "sony" },
{ RC_TYPE_RC5_SZ, "rc-5-sz" },
+ { RC_TYPE_MCE_KBD, "mce_kbd" },
{ RC_TYPE_LIRC, "lirc" },
{ RC_TYPE_OTHER, "other" },
};
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 4e1409e..17c9759 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -18,12 +18,13 @@
#define RC_TYPE_JVC (1 << 3) /* JVC protocol */
#define RC_TYPE_SONY (1 << 4) /* Sony12/15/20 protocol */
#define RC_TYPE_RC5_SZ (1 << 5) /* RC5 variant used by Streamzap */
+#define RC_TYPE_MCE_KBD (1 << 29) /* RC6-ish MCE keyboard/mouse */
#define RC_TYPE_LIRC (1 << 30) /* Pass raw IR to lirc userspace */
#define RC_TYPE_OTHER (1u << 31)
#define RC_TYPE_ALL (RC_TYPE_RC5 | RC_TYPE_NEC | RC_TYPE_RC6 | \
RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \
- RC_TYPE_RC5_SZ | RC_TYPE_OTHER)
+ RC_TYPE_RC5_SZ | RC_TYPE_MCE_KBD | RC_TYPE_OTHER)
struct rc_map_table {
u32 scancode;
--
1.7.5.2
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] [media] rc-core support for Microsoft IR keyboard/mouse 2011-06-03 21:28 [PATCH] [media] rc-core support for Microsoft IR keyboard/mouse Jarod Wilson @ 2011-06-04 17:52 ` Jarod Wilson 2011-06-11 13:38 ` Mauro Carvalho Chehab 2011-07-13 21:09 ` [PATCH v2] " Jarod Wilson 2 siblings, 0 replies; 5+ messages in thread From: Jarod Wilson @ 2011-06-04 17:52 UTC (permalink / raw) To: Linux Media Mailing List On Jun 3, 2011, at 5:28 PM, Jarod Wilson wrote: > This is a custom IR protocol decoder, for the RC-6-ish protocol used by > the Microsoft Remote Keyboard. > > http://www.amazon.com/Microsoft-Remote-Keyboard-Windows-ZV1-00004/dp/B000AOAAN8 > > Its a standard keyboard with embedded thumb stick mouse pointer and > mouse buttons, along with a number of media keys. The media keys are > standard RC-6, identical to the signals from the stock MCE remotes, and > will be handled as such. The keyboard and mouse signals will be decoded > and delivered to the system by an input device registered specifically > by this driver. > > Successfully tested with an mceusb-driven receiver, but this should > actually work with any raw IR rc-core receiver. > > This work is inspired by lirc_mod_mce: > > http://mod-mce.sourceforge.net/ > > The documentation there and code aided in understanding and decoding the > protocol, but the bulk of the code is actually borrowed more from the > existing in-kernel decoders than anything. I did recycle the keyboard > keycode table and a few defines from lirc_mod_mce though. Nb: this should more or less be considered as an RFC. One thing I already know I need/want to add is a timer callback to make sure we don't get stuck keys due to missing a release event signal. The main area of contention though is over how the keyboard/mouse device is set up. Currently, if you have three raw rc-core IR receivers in your system, you get three separate keyboard/mouse event devices, stored inside rc_dev->raw->mce_kbd->idev. I *think* this is the right way to do this, but one could argue that the decoder should just have a single input_dev within the decoder itself, which is used to feed along signals from any raw IR device. The other question is whether or not this module should be loaded by default when rc-core is initialized. The current implementation means this is loaded, and input devices are set up for every raw IR device, and I doubt the vast majority of people with raw IR receivers actually have this keyboard. -- Jarod Wilson jarod@wilsonet.com ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] [media] rc-core support for Microsoft IR keyboard/mouse 2011-06-03 21:28 [PATCH] [media] rc-core support for Microsoft IR keyboard/mouse Jarod Wilson 2011-06-04 17:52 ` Jarod Wilson @ 2011-06-11 13:38 ` Mauro Carvalho Chehab 2011-06-12 18:09 ` Jarod Wilson 2011-07-13 21:09 ` [PATCH v2] " Jarod Wilson 2 siblings, 1 reply; 5+ messages in thread From: Mauro Carvalho Chehab @ 2011-06-11 13:38 UTC (permalink / raw) To: Jarod Wilson; +Cc: linux-media Em 03-06-2011 18:28, Jarod Wilson escreveu: > This is a custom IR protocol decoder, for the RC-6-ish protocol used by > the Microsoft Remote Keyboard. > > http://www.amazon.com/Microsoft-Remote-Keyboard-Windows-ZV1-00004/dp/B000AOAAN8 > > Its a standard keyboard with embedded thumb stick mouse pointer and > mouse buttons, along with a number of media keys. The media keys are > standard RC-6, identical to the signals from the stock MCE remotes, and > will be handled as such. The keyboard and mouse signals will be decoded > and delivered to the system by an input device registered specifically > by this driver. > > Successfully tested with an mceusb-driven receiver, but this should > actually work with any raw IR rc-core receiver. > > This work is inspired by lirc_mod_mce: > > http://mod-mce.sourceforge.net/ > > The documentation there and code aided in understanding and decoding the > protocol, but the bulk of the code is actually borrowed more from the > existing in-kernel decoders than anything. I did recycle the keyboard > keycode table and a few defines from lirc_mod_mce though. > > Signed-off-by: Jarod Wilson <jarod@redhat.com> > --- I did only a quick review, and everything looks fine for me. Just two comments: > +#if 0 > + /* Adding this reference means two input devices are associated with > + * this rc-core device, which ir-keytable doesn't cope with yet */ > + idev->dev.parent = &dev->dev; > +#endif Well, it was never tested with such config ;) Feel free to fix rc-core. > +static unsigned char kbd_keycodes[256] = { > + 0, 0, 0, 0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38, > + 50, 49, 24, 25, 16, 19, 31, 20, 22, 47, 17, 45, 21, 44, 2, 3, > + 4, 5, 6, 7, 8, 9, 10, 11, 28, 1, 14, 15, 57, 12, 13, 26, > + 27, 43, 43, 39, 40, 41, 51, 52, 53, 58, 59, 60, 61, 62, 63, 64, > + 65, 66, 67, 68, 87, 88, 99, 70, 119, 110, 102, 104, 111, 107, 109, 106, > + 105, 108, 103, 69, 98, 55, 74, 78, 96, 79, 80, 81, 75, 76, 77, 71, > + 72, 73, 82, 83, 86, 127, 116, 117, 183, 184, 185, 186, 187, 188, 189, 190, > + 191, 192, 193, 194, 134, 138, 130, 132, 128, 129, 131, 137, 133, 135, 136, 113, > + 115, 114, 0, 0, 0, 121, 0, 89, 93, 124, 92, 94, 95, 0, 0, 0, > + 122, 123, 90, 91, 85, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, > + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, > + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, > + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, > + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, > + 29, 42, 56, 125, 97, 54, 100, 126, 164, 166, 165, 163, 161, 115, 114, 113, > + 150, 158, 159, 128, 136, 177, 178, 176, 142, 152, 173, 140 > +}; This table looks weird to me: too much magic numbers there. Shouldn't the above be replaced by KEY_* definitions? Cheers, Mauro - PS.: I would like to have one of those keyboards, in order to test some things here, in special, for the xorg input/event proposal on my TODO list ;) Is it a cheap device? I may try to buy one the next time I would travel to US. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] [media] rc-core support for Microsoft IR keyboard/mouse 2011-06-11 13:38 ` Mauro Carvalho Chehab @ 2011-06-12 18:09 ` Jarod Wilson 0 siblings, 0 replies; 5+ messages in thread From: Jarod Wilson @ 2011-06-12 18:09 UTC (permalink / raw) To: Mauro Carvalho Chehab; +Cc: Linux Media Mailing List On Jun 11, 2011, at 9:38 AM, Mauro Carvalho Chehab wrote: > Em 03-06-2011 18:28, Jarod Wilson escreveu: >> This is a custom IR protocol decoder, for the RC-6-ish protocol used by >> the Microsoft Remote Keyboard. >> >> http://www.amazon.com/Microsoft-Remote-Keyboard-Windows-ZV1-00004/dp/B000AOAAN8 >> >> Its a standard keyboard with embedded thumb stick mouse pointer and >> mouse buttons, along with a number of media keys. The media keys are >> standard RC-6, identical to the signals from the stock MCE remotes, and >> will be handled as such. The keyboard and mouse signals will be decoded >> and delivered to the system by an input device registered specifically >> by this driver. >> >> Successfully tested with an mceusb-driven receiver, but this should >> actually work with any raw IR rc-core receiver. >> >> This work is inspired by lirc_mod_mce: >> >> http://mod-mce.sourceforge.net/ >> >> The documentation there and code aided in understanding and decoding the >> protocol, but the bulk of the code is actually borrowed more from the >> existing in-kernel decoders than anything. I did recycle the keyboard >> keycode table and a few defines from lirc_mod_mce though. >> >> Signed-off-by: Jarod Wilson <jarod@redhat.com> >> --- > > I did only a quick review, and everything looks fine for me. Just two comments: > >> +#if 0 >> + /* Adding this reference means two input devices are associated with >> + * this rc-core device, which ir-keytable doesn't cope with yet */ >> + idev->dev.parent = &dev->dev; >> +#endif > > Well, it was never tested with such config ;) D'oh, I meant to mention that #if 0... > Feel free to fix rc-core. It wasn't actually rc-core that complained, it was ir-keytable that spit out a message about not being able to handle an rc device with multiple input devices, but the fix may well require both userspace and kernelspace changes... >> +static unsigned char kbd_keycodes[256] = { >> + 0, 0, 0, 0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38, >> + 50, 49, 24, 25, 16, 19, 31, 20, 22, 47, 17, 45, 21, 44, 2, 3, >> + 4, 5, 6, 7, 8, 9, 10, 11, 28, 1, 14, 15, 57, 12, 13, 26, >> + 27, 43, 43, 39, 40, 41, 51, 52, 53, 58, 59, 60, 61, 62, 63, 64, >> + 65, 66, 67, 68, 87, 88, 99, 70, 119, 110, 102, 104, 111, 107, 109, 106, >> + 105, 108, 103, 69, 98, 55, 74, 78, 96, 79, 80, 81, 75, 76, 77, 71, >> + 72, 73, 82, 83, 86, 127, 116, 117, 183, 184, 185, 186, 187, 188, 189, 190, >> + 191, 192, 193, 194, 134, 138, 130, 132, 128, 129, 131, 137, 133, 135, 136, 113, >> + 115, 114, 0, 0, 0, 121, 0, 89, 93, 124, 92, 94, 95, 0, 0, 0, >> + 122, 123, 90, 91, 85, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, >> + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, >> + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, >> + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, >> + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, >> + 29, 42, 56, 125, 97, 54, 100, 126, 164, 166, 165, 163, 161, 115, 114, 113, >> + 150, 158, 159, 128, 136, 177, 178, 176, 142, 152, 173, 140 >> +}; > > This table looks weird to me: too much magic numbers there. Shouldn't > the above be replaced by KEY_* definitions? Yeah, probably. The above is basically the same convention as hid_keyboard in drivers/hid/hid-input.c, but that doesn't mean we can't strive to do better. ;) > PS.: I would like to have one of those keyboards, in order to test some things here, > in special, for the xorg input/event proposal on my TODO list ;) Is it a cheap device? > I may try to buy one the next time I would travel to US. Looks like Amazon has them listed for less than $40USD right now, but they're becoming increasingly hard to find, as I believe they're discontinued. Don't know if I've ever seen them in a brick-n-mortar store anywhere. I should really get one for myself, I have to send this one back to the guy who loaned it to me. I could just make it a double order and stash one on the shelf for ya. -- Jarod Wilson jarod@wilsonet.com ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2] [media] rc-core support for Microsoft IR keyboard/mouse 2011-06-03 21:28 [PATCH] [media] rc-core support for Microsoft IR keyboard/mouse Jarod Wilson 2011-06-04 17:52 ` Jarod Wilson 2011-06-11 13:38 ` Mauro Carvalho Chehab @ 2011-07-13 21:09 ` Jarod Wilson 2 siblings, 0 replies; 5+ messages in thread From: Jarod Wilson @ 2011-07-13 21:09 UTC (permalink / raw) To: linux-media; +Cc: Jarod Wilson, Florian Demski This is a custom IR protocol decoder, for the RC-6-ish protocol used by the Microsoft Remote Keyboard, apparently developed internally at Microsoft, and officially dubbed MCIR-2, per their March 2011 remote and transceiver requirements and specifications document, which also touches on this IR keyboard/mouse device. http://www.amazon.com/Microsoft-Remote-Keyboard-Windows-ZV1-00004/dp/B000AOAAN8 Its a standard keyboard with embedded thumb stick mouse pointer and mouse buttons, along with a number of media keys. The media keys are standard RC-6, identical to the signals from the stock MCE remotes, and will be handled as such. The keyboard and mouse signals will be decoded and delivered to the system by an input device registered specifically by this driver. Successfully tested with multiple mceusb-driven transceivers, as well as with fintek-cir and redrat3 hardware. Essentially, any raw IR hardware with enough sampling resolution should be able to use this decoder, nothing about it is at all receiver-hardware-specific. This work is inspired by lirc_mod_mce: http://mod-mce.sourceforge.net/ The documentation there and code aided in understanding and decoding the protocol, but the bulk of the code is actually borrowed more from the existing in-kernel decoders than anything. I did recycle the keyboard keycode table, a few defines, and some of the keyboard and mouse data parsing bits from lirc_mod_mce though. Special thanks to James Meyer for providing the hardware, and being patient with me as I took forever to get around to writing this. v2: now know its MCIR-2, updated accordingly, added a key release timer callback routine to ensure we don't get any stuck keys, and used symbolic names for the keytable. Also cc'ing Florian this time, who I believe is the original mod-mce author... CC: Florian Demski <fdemski@users.sourceforge.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> --- drivers/media/rc/Kconfig | 11 + drivers/media/rc/Makefile | 1 + drivers/media/rc/ir-mce_kbd-decoder.c | 448 +++++++++++++++++++++++++++++++++ drivers/media/rc/ir-raw.c | 1 + drivers/media/rc/rc-core-priv.h | 18 ++ drivers/media/rc/rc-main.c | 1 + include/media/rc-map.h | 3 +- 7 files changed, 482 insertions(+), 1 deletions(-) create mode 100644 drivers/media/rc/ir-mce_kbd-decoder.c diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index 7d4bbc2..899f783 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -87,6 +87,17 @@ config IR_RC5_SZ_DECODER uses an IR protocol that is almost standard RC-5, but not quite, as it uses an additional bit). +config IR_MCE_KBD_DECODER + tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have a Microsoft Remote Keyboard for + Windows Media Center Edition, which you would like to use with + a raw IR receiver in your system. + config IR_LIRC_CODEC tristate "Enable IR to LIRC bridge" depends on RC_CORE diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile index 52830e5..f224db0 100644 --- a/drivers/media/rc/Makefile +++ b/drivers/media/rc/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o obj-$(CONFIG_IR_RC5_SZ_DECODER) += ir-rc5-sz-decoder.o +obj-$(CONFIG_IR_MCE_KBD_DECODER) += ir-mce_kbd-decoder.o obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o # stand-alone IR receivers/transmitters diff --git a/drivers/media/rc/ir-mce_kbd-decoder.c b/drivers/media/rc/ir-mce_kbd-decoder.c new file mode 100644 index 0000000..fe96e54 --- /dev/null +++ b/drivers/media/rc/ir-mce_kbd-decoder.c @@ -0,0 +1,448 @@ +/* ir-mce_kbd-decoder.c - A decoder for the RC6-ish keyboard/mouse IR protocol + * used by the Microsoft Remote Keyboard for Windows Media Center Edition, + * referred to by Microsoft's Windows Media Center remote specification docs + * as "an internal protocol called MCIR-2". + * + * Copyright (C) 2011 by Jarod Wilson <jarod@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "rc-core-priv.h" + +/* + * This decoder currently supports: + * - MCIR-2 29-bit IR signals used for mouse movement and buttons + * - MCIR-2 32-bit IR signals used for standard keyboard keys + * + * The media keys on the keyboard send RC-6 signals that are inditinguishable + * from the keys of the same name on the stock MCE remote, and will be handled + * by the standard RC-6 decoder, and be made available to the system via the + * input device for the remote, rather than the keyboard/mouse one. + */ + +#define MCIR2_UNIT 333333 /* ns */ +#define MCIR2_HEADER_NBITS 5 +#define MCIR2_MOUSE_NBITS 29 +#define MCIR2_KEYBOARD_NBITS 32 +#define MCIR2_PREFIX_PULSE (8 * MCIR2_UNIT) +#define MCIR2_PREFIX_SPACE (1 * MCIR2_UNIT) +#define MCIR2_MAX_LEN (3 * MCIR2_UNIT) +#define MCIR2_BIT_START (1 * MCIR2_UNIT) +#define MCIR2_BIT_END (1 * MCIR2_UNIT) +#define MCIR2_BIT_0 (1 * MCIR2_UNIT) +#define MCIR2_BIT_SET (2 * MCIR2_UNIT) +#define MCIR2_MODE_MASK 0xf /* for the header bits */ +#define MCIR2_KEYBOARD_HEADER 0x4 +#define MCIR2_MOUSE_HEADER 0x1 +#define MCIR2_MASK_KEYS_START 0xe0 + +enum mce_kbd_mode { + MCIR2_MODE_KEYBOARD, + MCIR2_MODE_MOUSE, + MCIR2_MODE_UNKNOWN, +}; + +enum mce_kbd_state { + STATE_INACTIVE, + STATE_HEADER_BIT_START, + STATE_HEADER_BIT_END, + STATE_BODY_BIT_START, + STATE_BODY_BIT_END, + STATE_FINISHED, +}; + +static unsigned char kbd_keycodes[256] = { + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_A, + KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, + KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, + KEY_L, KEY_M, KEY_N, KEY_O, KEY_P, + KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, + KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, + KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, + KEY_6, KEY_7, KEY_8, KEY_9, KEY_0, + KEY_ENTER, KEY_ESC, KEY_BACKSPACE, KEY_TAB, KEY_SPACE, + KEY_MINUS, KEY_EQUAL, KEY_LEFTBRACE, KEY_RIGHTBRACE, KEY_BACKSLASH, + KEY_RESERVED, KEY_SEMICOLON, KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA, + KEY_DOT, KEY_SLASH, KEY_CAPSLOCK, KEY_F1, KEY_F2, + KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, + KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_F12, + KEY_SYSRQ, KEY_SCROLLLOCK, KEY_PAUSE, KEY_INSERT, KEY_HOME, + KEY_PAGEUP, KEY_DELETE, KEY_END, KEY_PAGEDOWN, KEY_RIGHT, + KEY_LEFT, KEY_DOWN, KEY_UP, KEY_NUMLOCK, KEY_KPSLASH, + KEY_KPASTERISK, KEY_KPMINUS, KEY_KPPLUS, KEY_KPENTER, KEY_KP1, + KEY_KP2, KEY_KP3, KEY_KP4, KEY_KP5, KEY_KP6, + KEY_KP7, KEY_KP8, KEY_KP9, KEY_KP0, KEY_KPDOT, + KEY_102ND, KEY_COMPOSE, KEY_POWER, KEY_KPEQUAL, KEY_F13, + KEY_F14, KEY_F15, KEY_F16, KEY_F17, KEY_F18, + KEY_F19, KEY_F20, KEY_F21, KEY_F22, KEY_F23, + KEY_F24, KEY_OPEN, KEY_HELP, KEY_PROPS, KEY_FRONT, + KEY_STOP, KEY_AGAIN, KEY_UNDO, KEY_CUT, KEY_COPY, + KEY_PASTE, KEY_FIND, KEY_MUTE, KEY_VOLUMEUP, KEY_VOLUMEDOWN, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_KPCOMMA, KEY_RESERVED, + KEY_RO, KEY_KATAKANAHIRAGANA, KEY_YEN, KEY_HENKAN, KEY_MUHENKAN, + KEY_KPJPCOMMA, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_HANGUEL, + KEY_HANJA, KEY_KATAKANA, KEY_HIRAGANA, KEY_ZENKAKUHANKAKU, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_LEFTCTRL, + KEY_LEFTSHIFT, KEY_LEFTALT, KEY_LEFTMETA, KEY_RIGHTCTRL, KEY_RIGHTSHIFT, + KEY_RIGHTALT, KEY_RIGHTMETA, KEY_PLAYPAUSE, KEY_STOPCD, KEY_PREVIOUSSONG, + KEY_NEXTSONG, KEY_EJECTCD, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE, + KEY_WWW, KEY_BACK, KEY_FORWARD, KEY_STOP, KEY_FIND, + KEY_SCROLLUP, KEY_SCROLLDOWN, KEY_EDIT, KEY_SLEEP, KEY_COFFEE, + KEY_REFRESH, KEY_CALC, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED +}; + +static void mce_kbd_rx_timeout(unsigned long data) +{ + struct mce_kbd_dec *mce_kbd = (struct mce_kbd_dec *)data; + int i; + unsigned char maskcode; + + IR_dprintk(2, "timer callback clearing all keys\n"); + + for (i = 0; i < 7; i++) { + maskcode = kbd_keycodes[MCIR2_MASK_KEYS_START + i]; + input_report_key(mce_kbd->idev, maskcode, 0); + } + + for (i = 0; i < MCIR2_MASK_KEYS_START; i++) + input_report_key(mce_kbd->idev, kbd_keycodes[i], 0); +} + +static enum mce_kbd_mode mce_kbd_mode(struct mce_kbd_dec *data) +{ + switch (data->header & MCIR2_MODE_MASK) { + case MCIR2_KEYBOARD_HEADER: + return MCIR2_MODE_KEYBOARD; + case MCIR2_MOUSE_HEADER: + return MCIR2_MODE_MOUSE; + default: + return MCIR2_MODE_UNKNOWN; + } +} + +static void ir_mce_kbd_process_keyboard_data(struct input_dev *idev, + u32 scancode) +{ + u8 keydata = (scancode >> 8) & 0xff; + u8 shiftmask = scancode & 0xff; + unsigned char keycode, maskcode; + int i, keystate; + + IR_dprintk(1, "keyboard: keydata = 0x%02x, shiftmask = 0x%02x\n", + keydata, shiftmask); + + for (i = 0; i < 7; i++) { + maskcode = kbd_keycodes[MCIR2_MASK_KEYS_START + i]; + if (shiftmask & (1 << i)) + keystate = 1; + else + keystate = 0; + input_report_key(idev, maskcode, keystate); + } + + if (keydata) { + keycode = kbd_keycodes[keydata]; + input_report_key(idev, keycode, 1); + } else { + for (i = 0; i < MCIR2_MASK_KEYS_START; i++) + input_report_key(idev, kbd_keycodes[i], 0); + } +} + +static void ir_mce_kbd_process_mouse_data(struct input_dev *idev, u32 scancode) +{ + /* raw mouse coordinates */ + u8 xdata = (scancode >> 7) & 0x7f; + u8 ydata = (scancode >> 14) & 0x7f; + int x, y; + /* mouse buttons */ + bool right = scancode & 0x40; + bool left = scancode & 0x20; + + if (xdata & 0x40) + x = -((~xdata & 0x7f) + 1); + else + x = xdata; + + if (ydata & 0x40) + y = -((~ydata & 0x7f) + 1); + else + y = ydata; + + IR_dprintk(1, "mouse: x = %d, y = %d, btns = %s%s\n", + x, y, left ? "L" : "", right ? "R" : ""); + + input_report_rel(idev, REL_X, x); + input_report_rel(idev, REL_Y, y); + + input_report_key(idev, BTN_LEFT, left); + input_report_key(idev, BTN_RIGHT, right); +} + +/** + * ir_mce_kbd_decode() - Decode one mce_kbd pulse or space + * @dev: the struct rc_dev descriptor of the device + * @ev: the struct ir_raw_event descriptor of the pulse/space + * + * This function returns -EINVAL if the pulse violates the state machine + */ +static int ir_mce_kbd_decode(struct rc_dev *dev, struct ir_raw_event ev) +{ + struct mce_kbd_dec *data = &dev->raw->mce_kbd; + u32 scancode; + unsigned long delay; + + if (!(dev->raw->enabled_protocols & RC_TYPE_MCE_KBD)) + return 0; + + if (!is_timing_event(ev)) { + if (ev.reset) + data->state = STATE_INACTIVE; + return 0; + } + + if (!geq_margin(ev.duration, MCIR2_UNIT, MCIR2_UNIT / 2)) + goto out; + +again: + IR_dprintk(2, "started at state %i (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + + if (!geq_margin(ev.duration, MCIR2_UNIT, MCIR2_UNIT / 2)) + return 0; + + switch (data->state) { + + case STATE_INACTIVE: + if (!ev.pulse) + break; + + /* Note: larger margin on first pulse since each MCIR2_UNIT + is quite short and some hardware takes some time to + adjust to the signal */ + if (!eq_margin(ev.duration, MCIR2_PREFIX_PULSE, MCIR2_UNIT)) + break; + + data->state = STATE_HEADER_BIT_START; + data->count = 0; + data->header = 0; + return 0; + + case STATE_HEADER_BIT_START: + if (geq_margin(ev.duration, MCIR2_MAX_LEN, MCIR2_UNIT / 2)) + break; + + data->header <<= 1; + if (ev.pulse) + data->header |= 1; + data->count++; + data->state = STATE_HEADER_BIT_END; + return 0; + + case STATE_HEADER_BIT_END: + if (!is_transition(&ev, &dev->raw->prev_ev)) + break; + + decrease_duration(&ev, MCIR2_BIT_END); + + if (data->count != MCIR2_HEADER_NBITS) { + data->state = STATE_HEADER_BIT_START; + goto again; + } + + switch (mce_kbd_mode(data)) { + case MCIR2_MODE_KEYBOARD: + data->wanted_bits = MCIR2_KEYBOARD_NBITS; + break; + case MCIR2_MODE_MOUSE: + data->wanted_bits = MCIR2_MOUSE_NBITS; + break; + default: + IR_dprintk(1, "not keyboard or mouse data\n"); + goto out; + } + + data->count = 0; + data->body = 0; + data->state = STATE_BODY_BIT_START; + goto again; + + case STATE_BODY_BIT_START: + if (geq_margin(ev.duration, MCIR2_MAX_LEN, MCIR2_UNIT / 2)) + break; + + data->body <<= 1; + if (ev.pulse) + data->body |= 1; + data->count++; + data->state = STATE_BODY_BIT_END; + return 0; + + case STATE_BODY_BIT_END: + if (!is_transition(&ev, &dev->raw->prev_ev)) + break; + + if (data->count == data->wanted_bits) + data->state = STATE_FINISHED; + else + data->state = STATE_BODY_BIT_START; + + decrease_duration(&ev, MCIR2_BIT_END); + goto again; + + case STATE_FINISHED: + if (ev.pulse) + break; + + switch (data->wanted_bits) { + case MCIR2_KEYBOARD_NBITS: + scancode = data->body & 0xffff; + IR_dprintk(1, "keyboard data 0x%08x\n", data->body); + if (dev->timeout) + delay = usecs_to_jiffies(dev->timeout / 1000); + else + delay = msecs_to_jiffies(100); + mod_timer(&data->rx_timeout, jiffies + delay); + /* Pass data to keyboard buffer parser */ + ir_mce_kbd_process_keyboard_data(data->idev, scancode); + break; + case MCIR2_MOUSE_NBITS: + scancode = data->body & 0x1fffff; + IR_dprintk(1, "mouse data 0x%06x\n", scancode); + /* Pass data to mouse buffer parser */ + ir_mce_kbd_process_mouse_data(data->idev, scancode); + break; + default: + IR_dprintk(1, "not keyboard or mouse data\n"); + goto out; + } + + data->state = STATE_INACTIVE; + input_sync(data->idev); + return 0; + } + +out: + IR_dprintk(1, "failed at state %i (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + data->state = STATE_INACTIVE; + input_sync(data->idev); + return -EINVAL; +} + +static int ir_mce_kbd_register(struct rc_dev *dev) +{ + struct mce_kbd_dec *mce_kbd = &dev->raw->mce_kbd; + struct input_dev *idev; + int i, ret; + + idev = input_allocate_device(); + if (!idev) + return -ENOMEM; + + snprintf(mce_kbd->name, sizeof(mce_kbd->name), + "MCE IR Keyboard/Mouse (%s)", dev->driver_name); + strlcat(mce_kbd->phys, "/input0", sizeof(mce_kbd->phys)); + + idev->name = mce_kbd->name; + idev->phys = mce_kbd->phys; + + /* Keyboard bits */ + set_bit(EV_KEY, idev->evbit); + set_bit(EV_REP, idev->evbit); + for (i = 0; i < sizeof(kbd_keycodes); i++) + set_bit(kbd_keycodes[i], idev->keybit); + + /* Mouse bits */ + set_bit(EV_REL, idev->evbit); + set_bit(REL_X, idev->relbit); + set_bit(REL_Y, idev->relbit); + set_bit(BTN_LEFT, idev->keybit); + set_bit(BTN_RIGHT, idev->keybit); + + /* Report scancodes too */ + set_bit(EV_MSC, idev->evbit); + set_bit(MSC_SCAN, idev->mscbit); + + setup_timer(&mce_kbd->rx_timeout, mce_kbd_rx_timeout, + (unsigned long)mce_kbd); + + input_set_drvdata(idev, mce_kbd); + +#if 0 + /* Adding this reference means two input devices are associated with + * this rc-core device, which ir-keytable doesn't cope with yet */ + idev->dev.parent = &dev->dev; +#endif + + ret = input_register_device(idev); + if (ret < 0) { + input_free_device(idev); + return -EIO; + } + + mce_kbd->idev = idev; + + return 0; +} + +static int ir_mce_kbd_unregister(struct rc_dev *dev) +{ + struct mce_kbd_dec *mce_kbd = &dev->raw->mce_kbd; + struct input_dev *idev = mce_kbd->idev; + + del_timer_sync(&mce_kbd->rx_timeout); + input_unregister_device(idev); + + return 0; +} + +static struct ir_raw_handler mce_kbd_handler = { + .protocols = RC_TYPE_MCE_KBD, + .decode = ir_mce_kbd_decode, + .raw_register = ir_mce_kbd_register, + .raw_unregister = ir_mce_kbd_unregister, +}; + +static int __init ir_mce_kbd_decode_init(void) +{ + ir_raw_handler_register(&mce_kbd_handler); + + printk(KERN_INFO "IR MCE Keyboard/mouse protocol handler initialized\n"); + return 0; +} + +static void __exit ir_mce_kbd_decode_exit(void) +{ + ir_raw_handler_unregister(&mce_kbd_handler); +} + +module_init(ir_mce_kbd_decode_init); +module_exit(ir_mce_kbd_decode_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); +MODULE_DESCRIPTION("MCE Keyboard/mouse IR protocol decoder"); diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c index 423ed45..27808bb 100644 --- a/drivers/media/rc/ir-raw.c +++ b/drivers/media/rc/ir-raw.c @@ -355,6 +355,7 @@ static void init_decoders(struct work_struct *work) load_rc6_decode(); load_jvc_decode(); load_sony_decode(); + load_mce_kbd_decode(); load_lirc_codec(); /* If needed, we may later add some init code. In this case, diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h index 873b387..04c2c72 100644 --- a/drivers/media/rc/rc-core-priv.h +++ b/drivers/media/rc/rc-core-priv.h @@ -84,6 +84,17 @@ struct ir_raw_event_ctrl { unsigned count; unsigned wanted_bits; } rc5_sz; + struct mce_kbd_dec { + struct input_dev *idev; + struct timer_list rx_timeout; + char name[64]; + char phys[64]; + int state; + u8 header; + u32 body; + unsigned count; + unsigned wanted_bits; + } mce_kbd; struct lirc_codec { struct rc_dev *dev; struct lirc_driver *drv; @@ -182,6 +193,13 @@ void ir_raw_init(void); #define load_sony_decode() 0 #endif +/* from ir-mce_kbd-decoder.c */ +#ifdef CONFIG_IR_MCE_KBD_DECODER_MODULE +#define load_mce_kbd_decode() request_module("ir-mce_kbd-decoder") +#else +#define load_mce_kbd_decode() 0 +#endif + /* from ir-lirc-codec.c */ #ifdef CONFIG_IR_LIRC_CODEC_MODULE #define load_lirc_codec() request_module("ir-lirc-codec") diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 3186ac7..e9568e4 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -735,6 +735,7 @@ static struct { { RC_TYPE_JVC, "jvc" }, { RC_TYPE_SONY, "sony" }, { RC_TYPE_RC5_SZ, "rc-5-sz" }, + { RC_TYPE_MCE_KBD, "mce_kbd" }, { RC_TYPE_LIRC, "lirc" }, { RC_TYPE_OTHER, "other" }, }; diff --git a/include/media/rc-map.h b/include/media/rc-map.h index 4e1409e..17c9759 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -18,12 +18,13 @@ #define RC_TYPE_JVC (1 << 3) /* JVC protocol */ #define RC_TYPE_SONY (1 << 4) /* Sony12/15/20 protocol */ #define RC_TYPE_RC5_SZ (1 << 5) /* RC5 variant used by Streamzap */ +#define RC_TYPE_MCE_KBD (1 << 29) /* RC6-ish MCE keyboard/mouse */ #define RC_TYPE_LIRC (1 << 30) /* Pass raw IR to lirc userspace */ #define RC_TYPE_OTHER (1u << 31) #define RC_TYPE_ALL (RC_TYPE_RC5 | RC_TYPE_NEC | RC_TYPE_RC6 | \ RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \ - RC_TYPE_RC5_SZ | RC_TYPE_OTHER) + RC_TYPE_RC5_SZ | RC_TYPE_MCE_KBD | RC_TYPE_OTHER) struct rc_map_table { u32 scancode; -- 1.7.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-07-13 21:10 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2011-06-03 21:28 [PATCH] [media] rc-core support for Microsoft IR keyboard/mouse Jarod Wilson 2011-06-04 17:52 ` Jarod Wilson 2011-06-11 13:38 ` Mauro Carvalho Chehab 2011-06-12 18:09 ` Jarod Wilson 2011-07-13 21:09 ` [PATCH v2] " Jarod Wilson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).