* [PATCH v2] UPSTREAM: media: ov8856: skip OTP read in non-zero ACPI D state
@ 2022-05-10 15:12 Jimmy Su
2022-05-16 11:30 ` Dan Carpenter
2022-05-18 17:15 ` Sakari Ailus
0 siblings, 2 replies; 3+ messages in thread
From: Jimmy Su @ 2022-05-10 15:12 UTC (permalink / raw)
To: linux-media; +Cc: sakari.ailus, andy.yeh, jimmy.su, yhuang, akeem.chen
To skip OTP read function while enable non-zero ACPI D state.
This OTP read only influences streaming output with 3280x2464 &
1640x1232 resolution.
Signed-off-by: Jimmy Su <jimmy.su@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
---
drivers/media/i2c/ov8856.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
index 8785764b7a74..f1bb7d882183 100644
--- a/drivers/media/i2c/ov8856.c
+++ b/drivers/media/i2c/ov8856.c
@@ -1448,6 +1448,9 @@ struct ov8856 {
/* True if the device has been identified */
bool identified;
+
+ /* True for skipping otp read */
+ bool acpi_skip_otp;
};
struct ov8856_lane_cfg {
@@ -1692,7 +1695,7 @@ static int ov8856_identify_module(struct ov8856 *ov8856)
{
struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
int ret;
- u32 val;
+ u32 val, width;
if (ov8856->identified)
return 0;
@@ -1708,6 +1711,10 @@ static int ov8856_identify_module(struct ov8856 *ov8856)
return -ENXIO;
}
+ width = ov8856->cur_mode->width;
+ if (ov8856->acpi_skip_otp & ((width == 3280) | (width == 1640)))
+ goto otp_skip;
+
ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT,
OV8856_REG_VALUE_08BIT, OV8856_MODE_STREAMING);
if (ret)
@@ -1750,6 +1757,11 @@ static int ov8856_identify_module(struct ov8856 *ov8856)
ov8856->identified = true;
+ return 0;
+
+otp_skip:
+ ov8856->identified = true;
+
return 0;
}
@@ -2499,6 +2511,8 @@ static int ov8856_probe(struct i2c_client *client)
dev_err(&client->dev, "failed to find sensor: %d", ret);
goto probe_power_off;
}
+ } else {
+ ov8856->acpi_skip_otp = true;
}
mutex_init(&ov8856->mutex);
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] UPSTREAM: media: ov8856: skip OTP read in non-zero ACPI D state
2022-05-10 15:12 [PATCH v2] UPSTREAM: media: ov8856: skip OTP read in non-zero ACPI D state Jimmy Su
@ 2022-05-16 11:30 ` Dan Carpenter
2022-05-18 17:15 ` Sakari Ailus
1 sibling, 0 replies; 3+ messages in thread
From: Dan Carpenter @ 2022-05-16 11:30 UTC (permalink / raw)
To: kbuild, Jimmy Su, linux-media
Cc: lkp, kbuild-all, sakari.ailus, andy.yeh, jimmy.su, yhuang, akeem.chen
Hi Jimmy,
url: https://github.com/intel-lab-lkp/linux/commits/Jimmy-Su/UPSTREAM-media-ov8856-skip-OTP-read-in-non-zero-ACPI-D-state/20220510-232606
base: git://linuxtv.org/media_tree.git master
config: nios2-randconfig-m031-20220512 (https://download.01.org/0day-ci/archive/20220513/202205131109.giBGpLnO-lkp@intel.com/config)
compiler: nios2-linux-gcc (GCC) 11.3.0
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
smatch warnings:
drivers/media/i2c/ov8856.c:1715 ov8856_identify_module() warn: maybe use && instead of &
vim +1715 drivers/media/i2c/ov8856.c
0e014f1a8d546f Bingbu Cao 2021-12-15 1694 static int ov8856_identify_module(struct ov8856 *ov8856)
0e014f1a8d546f Bingbu Cao 2021-12-15 1695 {
0e014f1a8d546f Bingbu Cao 2021-12-15 1696 struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
0e014f1a8d546f Bingbu Cao 2021-12-15 1697 int ret;
25bf233398211c Jimmy Su 2022-05-10 1698 u32 val, width;
0e014f1a8d546f Bingbu Cao 2021-12-15 1699
0e014f1a8d546f Bingbu Cao 2021-12-15 1700 if (ov8856->identified)
0e014f1a8d546f Bingbu Cao 2021-12-15 1701 return 0;
0e014f1a8d546f Bingbu Cao 2021-12-15 1702
0e014f1a8d546f Bingbu Cao 2021-12-15 1703 ret = ov8856_read_reg(ov8856, OV8856_REG_CHIP_ID,
0e014f1a8d546f Bingbu Cao 2021-12-15 1704 OV8856_REG_VALUE_24BIT, &val);
0e014f1a8d546f Bingbu Cao 2021-12-15 1705 if (ret)
0e014f1a8d546f Bingbu Cao 2021-12-15 1706 return ret;
0e014f1a8d546f Bingbu Cao 2021-12-15 1707
0e014f1a8d546f Bingbu Cao 2021-12-15 1708 if (val != OV8856_CHIP_ID) {
0e014f1a8d546f Bingbu Cao 2021-12-15 1709 dev_err(&client->dev, "chip id mismatch: %x!=%x",
0e014f1a8d546f Bingbu Cao 2021-12-15 1710 OV8856_CHIP_ID, val);
0e014f1a8d546f Bingbu Cao 2021-12-15 1711 return -ENXIO;
0e014f1a8d546f Bingbu Cao 2021-12-15 1712 }
0e014f1a8d546f Bingbu Cao 2021-12-15 1713
25bf233398211c Jimmy Su 2022-05-10 1714 width = ov8856->cur_mode->width;
25bf233398211c Jimmy Su 2022-05-10 @1715 if (ov8856->acpi_skip_otp & ((width == 3280) | (width == 1640)))
I think Smatch will not print a warning for this if ->acpi_skip_otp is
declared as bool or if Smatch can determine that it is boolean from
the context, but the kbuild-bot does not do cross function analysis.
But to a human, the naming seems pretty likely that ov8856->acpi_skip_otp
so && and & are equivalent.
However && is more readable.
25bf233398211c Jimmy Su 2022-05-10 1716 goto otp_skip;
25bf233398211c Jimmy Su 2022-05-10 1717
0e014f1a8d546f Bingbu Cao 2021-12-15 1718 ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT,
0e014f1a8d546f Bingbu Cao 2021-12-15 1719 OV8856_REG_VALUE_08BIT, OV8856_MODE_STREAMING);
0e014f1a8d546f Bingbu Cao 2021-12-15 1720 if (ret)
0e014f1a8d546f Bingbu Cao 2021-12-15 1721 return ret;
0e014f1a8d546f Bingbu Cao 2021-12-15 1722
0e014f1a8d546f Bingbu Cao 2021-12-15 1723 ret = ov8856_write_reg(ov8856, OV8856_OTP_MODE_CTRL,
0e014f1a8d546f Bingbu Cao 2021-12-15 1724 OV8856_REG_VALUE_08BIT, OV8856_OTP_MODE_AUTO);
0e014f1a8d546f Bingbu Cao 2021-12-15 1725 if (ret) {
0e014f1a8d546f Bingbu Cao 2021-12-15 1726 dev_err(&client->dev, "failed to set otp mode");
0e014f1a8d546f Bingbu Cao 2021-12-15 1727 return ret;
0e014f1a8d546f Bingbu Cao 2021-12-15 1728 }
0e014f1a8d546f Bingbu Cao 2021-12-15 1729
--
0-DAY CI Kernel Test Service
https://01.org/lkp
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] UPSTREAM: media: ov8856: skip OTP read in non-zero ACPI D state
2022-05-10 15:12 [PATCH v2] UPSTREAM: media: ov8856: skip OTP read in non-zero ACPI D state Jimmy Su
2022-05-16 11:30 ` Dan Carpenter
@ 2022-05-18 17:15 ` Sakari Ailus
1 sibling, 0 replies; 3+ messages in thread
From: Sakari Ailus @ 2022-05-18 17:15 UTC (permalink / raw)
To: Jimmy Su; +Cc: linux-media, andy.yeh, yhuang, akeem.chen
Hi Jimmy,
On Tue, May 10, 2022 at 11:12:41PM +0800, Jimmy Su wrote:
> To skip OTP read function while enable non-zero ACPI D state.
> This OTP read only influences streaming output with 3280x2464 &
> 1640x1232 resolution.
This isn't the right way to fix the problem.
Reading the EEPROM (and thus starting streaming) is a problem since the
receiver has been already set up to receive a proper frame. EEPROM reading
should be instead moved to pre_streamon callback.
I suppose this way the sensor's CSI-2 TX is also set in LP-11 mode, as many
CSI-2 receivers expect.
--
Kind regards,
Sakari Ailus
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-05-18 17:43 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-10 15:12 [PATCH v2] UPSTREAM: media: ov8856: skip OTP read in non-zero ACPI D state Jimmy Su
2022-05-16 11:30 ` Dan Carpenter
2022-05-18 17:15 ` Sakari Ailus
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).