* [PATCH 2/3] cx23885: add DVBSky S952 support
@ 2014-11-05 14:58 Nibble Max
2014-11-05 23:13 ` Antti Palosaari
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Nibble Max @ 2014-11-05 14:58 UTC (permalink / raw)
To: Olli Salonen; +Cc: linux-media, Antti Palosaari
DVBSky S952 dvb-s/s2 dual PCIe card:
1>dvb frontend: M88TS2022(tuner),M88DS3103(demod)
2>PCIe bridge: CX23885(port b: parallel mode, port c: serial mode)
3>rc: cx23885 integrated.
Signed-off-by: Nibble Max <nibble.max@gmail.com>
---
drivers/media/pci/cx23885/cx23885-cards.c | 22 +++++++
drivers/media/pci/cx23885/cx23885-dvb.c | 99 ++++++++++++++++++++++++++++++-
drivers/media/pci/cx23885/cx23885-input.c | 3 +
drivers/media/pci/cx23885/cx23885.h | 1 +
4 files changed, 124 insertions(+), 1 deletion(-)
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index 4b9cb07..4bad27d 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -696,6 +696,11 @@ struct cx23885_board cx23885_boards[] = {
.name = "DVBSky S950",
.portb = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_DVBSKY_S952] = {
+ .name = "DVBSky S952",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -971,6 +976,10 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x4254,
.subdevice = 0x0950,
.card = CX23885_BOARD_DVBSKY_S950,
+ }, {
+ .subvendor = 0x4254,
+ .subdevice = 0x0952,
+ .card = CX23885_BOARD_DVBSKY_S952,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -1566,6 +1575,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
mdelay(60);
break;
case CX23885_BOARD_DVBSKY_T9580:
+ case CX23885_BOARD_DVBSKY_S952:
/* enable GPIO3-18 pins */
cx_write(MC417_CTL, 0x00000037);
cx23885_gpio_enable(dev, GPIO_2 | GPIO_11, 1);
@@ -1697,6 +1707,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
case CX23885_BOARD_DVBSKY_S950C:
case CX23885_BOARD_TT_CT2_4500_CI:
case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
if (!enable_885_ir)
break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
@@ -1748,6 +1759,7 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
case CX23885_BOARD_DVBSKY_S950C:
case CX23885_BOARD_TT_CT2_4500_CI:
case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
/* sd_ir is a duplicate pointer to the AV Core, just clear it */
dev->sd_ir = NULL;
@@ -1800,6 +1812,7 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
case CX23885_BOARD_DVBSKY_S950C:
case CX23885_BOARD_TT_CT2_4500_CI:
case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
if (dev->sd_ir)
cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
break;
@@ -1962,6 +1975,14 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
+ case CX23885_BOARD_DVBSKY_S952:
+ ts1->gen_ctrl_val = 0x5; /* Parallel */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ ts2->gen_ctrl_val = 0xe; /* Serial bus */
+ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
@@ -2029,6 +2050,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_DVBSKY_S950C:
case CX23885_BOARD_TT_CT2_4500_CI:
case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", 0x88 >> 1, NULL);
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
index 3410ab8..2457b64 100644
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -617,6 +617,32 @@ static int dvbsky_t9580_set_voltage(struct dvb_frontend *fe,
return 0;
}
+static int dvbsky_s952_portc_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage)
+{
+ struct cx23885_tsport *port = fe->dvb->priv;
+ struct cx23885_dev *dev = port->dev;
+
+ cx23885_gpio_enable(dev, GPIO_12 | GPIO_13, 1);
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ cx23885_gpio_set(dev, GPIO_13);
+ cx23885_gpio_clear(dev, GPIO_12);
+ break;
+ case SEC_VOLTAGE_18:
+ cx23885_gpio_set(dev, GPIO_13);
+ cx23885_gpio_set(dev, GPIO_12);
+ break;
+ case SEC_VOLTAGE_OFF:
+ cx23885_gpio_clear(dev, GPIO_13);
+ cx23885_gpio_clear(dev, GPIO_12);
+ break;
+ }
+ /* call the frontend set_voltage function */
+ return port->fe_set_voltage(fe, voltage);
+}
+
static int cx23885_sp2_ci_ctrl(void *priv, u8 read, int addr,
u8 data, int *mem)
{
@@ -878,6 +904,19 @@ static const struct m88ds3103_config dvbsky_s950c_m88ds3103_config = {
.agc = 0x99,
};
+static const struct m88ds3103_config dvbsky_s952_portc_m88ds3103_config = {
+ .i2c_addr = 0x68,
+ .clock = 27000000,
+ .i2c_wr_max = 33,
+ .clock_out = 0,
+ .ts_mode = M88DS3103_TS_SERIAL,
+ .ts_clk = 96000,
+ .ts_clk_pol = 0,
+ .lnb_en_pol = 1,
+ .lnb_hv_pol = 0,
+ .agc = 0x99,
+};
+
static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
{
struct cx23885_dev *dev = (struct cx23885_dev *)device;
@@ -1034,6 +1073,8 @@ static int dvb_register(struct cx23885_tsport *port)
struct i2c_board_info info;
struct i2c_adapter *adapter;
struct i2c_client *client_demod = NULL, *client_tuner = NULL, *client_ci = NULL;
+ const struct m88ds3103_config *p_m88ds3103_config = NULL;
+ int (*p_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage) = NULL;
int mfe_shared = 0; /* bus not shared by default */
int ret;
@@ -1849,6 +1890,61 @@ static int dvb_register(struct cx23885_tsport *port)
port->i2c_client_tuner = client_tuner;
break;
+ case CX23885_BOARD_DVBSKY_S952:
+ switch (port->nr) {
+ /* port b */
+ case 1:
+ i2c_bus = &dev->i2c_bus[1];
+ p_m88ds3103_config = &dvbsky_t9580_m88ds3103_config;
+ p_set_voltage = dvbsky_t9580_set_voltage;
+ break;
+ /* port c */
+ case 2:
+ i2c_bus = &dev->i2c_bus[0];
+ p_m88ds3103_config = &dvbsky_s952_portc_m88ds3103_config;
+ p_set_voltage = dvbsky_s952_portc_set_voltage;
+ break;
+ }
+
+ /* attach frontend */
+ fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
+ p_m88ds3103_config,
+ &i2c_bus->i2c_adap, &adapter);
+ if (fe0->dvb.frontend == NULL)
+ break;
+
+ /* attach tuner */
+ memset(&m88ts2022_config, 0, sizeof(m88ts2022_config));
+ m88ts2022_config.fe = fe0->dvb.frontend;
+ m88ts2022_config.clock = 27000000;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "m88ts2022", I2C_NAME_SIZE);
+ info.addr = 0x60;
+ info.platform_data = &m88ts2022_config;
+ request_module(info.type);
+ client_tuner = i2c_new_device(adapter, &info);
+ if (client_tuner == NULL ||
+ client_tuner->dev.driver == NULL)
+ goto frontend_detach;
+ if (!try_module_get(client_tuner->dev.driver->owner)) {
+ i2c_unregister_device(client_tuner);
+ goto frontend_detach;
+ }
+
+ /* delegate signal strength measurement to tuner */
+ fe0->dvb.frontend->ops.read_signal_strength =
+ fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
+
+ /*
+ * for setting the voltage we need to set GPIOs on
+ * the card.
+ */
+ port->fe_set_voltage =
+ fe0->dvb.frontend->ops.set_voltage;
+ fe0->dvb.frontend->ops.set_voltage = p_set_voltage;
+
+ port->i2c_client_tuner = client_tuner;
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
@@ -1924,7 +2020,8 @@ static int dvb_register(struct cx23885_tsport *port)
break;
}
case CX23885_BOARD_DVBSKY_T9580:
- case CX23885_BOARD_DVBSKY_S950: {
+ case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952: {
u8 eeprom[256]; /* 24C02 i2c eeprom */
if (port->nr > 2)
diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c
index 7523d0a..a1f4894 100644
--- a/drivers/media/pci/cx23885/cx23885-input.c
+++ b/drivers/media/pci/cx23885/cx23885-input.c
@@ -92,6 +92,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
case CX23885_BOARD_DVBSKY_S950C:
case CX23885_BOARD_TT_CT2_4500_CI:
case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
/*
* The only boards we handle right now. However other boards
* using the CX2388x integrated IR controller should be similar
@@ -149,6 +150,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
case CX23885_BOARD_DVBSKY_S950C:
case CX23885_BOARD_TT_CT2_4500_CI:
case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
/*
* The IR controller on this board only returns pulse widths.
* Any other mode setting will fail to set up the device.
@@ -319,6 +321,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
case CX23885_BOARD_DVBSKY_T980C:
case CX23885_BOARD_DVBSKY_S950C:
case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
/* Integrated CX23885 IR controller */
driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_BIT_ALL;
diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
index f9cd0da..58c5038 100644
--- a/drivers/media/pci/cx23885/cx23885.h
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -97,6 +97,7 @@
#define CX23885_BOARD_DVBSKY_S950C 47
#define CX23885_BOARD_TT_CT2_4500_CI 48
#define CX23885_BOARD_DVBSKY_S950 49
+#define CX23885_BOARD_DVBSKY_S952 50
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 2/3] cx23885: add DVBSky S952 support
2014-11-05 14:58 [PATCH 2/3] cx23885: add DVBSky S952 support Nibble Max
@ 2014-11-05 23:13 ` Antti Palosaari
2014-11-06 20:30 ` Olli Salonen
2014-11-07 7:03 ` Nibble Max
2 siblings, 0 replies; 4+ messages in thread
From: Antti Palosaari @ 2014-11-05 23:13 UTC (permalink / raw)
To: Nibble Max, Olli Salonen; +Cc: linux-media
Reviewed-by: Antti Palosaari <crope@iki.fi>
Patch looks correct for my eyes, but I am not professional here, so lets
Olli make final decision.
regards
Antti
On 11/05/2014 04:58 PM, Nibble Max wrote:
> DVBSky S952 dvb-s/s2 dual PCIe card:
> 1>dvb frontend: M88TS2022(tuner),M88DS3103(demod)
> 2>PCIe bridge: CX23885(port b: parallel mode, port c: serial mode)
> 3>rc: cx23885 integrated.
>
> Signed-off-by: Nibble Max <nibble.max@gmail.com>
> ---
> drivers/media/pci/cx23885/cx23885-cards.c | 22 +++++++
> drivers/media/pci/cx23885/cx23885-dvb.c | 99 ++++++++++++++++++++++++++++++-
> drivers/media/pci/cx23885/cx23885-input.c | 3 +
> drivers/media/pci/cx23885/cx23885.h | 1 +
> 4 files changed, 124 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
> index 4b9cb07..4bad27d 100644
> --- a/drivers/media/pci/cx23885/cx23885-cards.c
> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
> @@ -696,6 +696,11 @@ struct cx23885_board cx23885_boards[] = {
> .name = "DVBSky S950",
> .portb = CX23885_MPEG_DVB,
> },
> + [CX23885_BOARD_DVBSKY_S952] = {
> + .name = "DVBSky S952",
> + .portb = CX23885_MPEG_DVB,
> + .portc = CX23885_MPEG_DVB,
> + },
> };
> const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
>
> @@ -971,6 +976,10 @@ struct cx23885_subid cx23885_subids[] = {
> .subvendor = 0x4254,
> .subdevice = 0x0950,
> .card = CX23885_BOARD_DVBSKY_S950,
> + }, {
> + .subvendor = 0x4254,
> + .subdevice = 0x0952,
> + .card = CX23885_BOARD_DVBSKY_S952,
> },
> };
> const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
> @@ -1566,6 +1575,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
> mdelay(60);
> break;
> case CX23885_BOARD_DVBSKY_T9580:
> + case CX23885_BOARD_DVBSKY_S952:
> /* enable GPIO3-18 pins */
> cx_write(MC417_CTL, 0x00000037);
> cx23885_gpio_enable(dev, GPIO_2 | GPIO_11, 1);
> @@ -1697,6 +1707,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
> case CX23885_BOARD_DVBSKY_S950C:
> case CX23885_BOARD_TT_CT2_4500_CI:
> case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> if (!enable_885_ir)
> break;
> dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
> @@ -1748,6 +1759,7 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
> case CX23885_BOARD_DVBSKY_S950C:
> case CX23885_BOARD_TT_CT2_4500_CI:
> case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
> /* sd_ir is a duplicate pointer to the AV Core, just clear it */
> dev->sd_ir = NULL;
> @@ -1800,6 +1812,7 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
> case CX23885_BOARD_DVBSKY_S950C:
> case CX23885_BOARD_TT_CT2_4500_CI:
> case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> if (dev->sd_ir)
> cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
> break;
> @@ -1962,6 +1975,14 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
> ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
> break;
> + case CX23885_BOARD_DVBSKY_S952:
> + ts1->gen_ctrl_val = 0x5; /* Parallel */
> + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
> + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
> + ts2->gen_ctrl_val = 0xe; /* Serial bus */
> + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
> + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
> + break;
> case CX23885_BOARD_HAUPPAUGE_HVR1250:
> case CX23885_BOARD_HAUPPAUGE_HVR1500:
> case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
> @@ -2029,6 +2050,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> case CX23885_BOARD_DVBSKY_S950C:
> case CX23885_BOARD_TT_CT2_4500_CI:
> case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
> &dev->i2c_bus[2].i2c_adap,
> "cx25840", 0x88 >> 1, NULL);
> diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
> index 3410ab8..2457b64 100644
> --- a/drivers/media/pci/cx23885/cx23885-dvb.c
> +++ b/drivers/media/pci/cx23885/cx23885-dvb.c
> @@ -617,6 +617,32 @@ static int dvbsky_t9580_set_voltage(struct dvb_frontend *fe,
> return 0;
> }
>
> +static int dvbsky_s952_portc_set_voltage(struct dvb_frontend *fe,
> + fe_sec_voltage_t voltage)
> +{
> + struct cx23885_tsport *port = fe->dvb->priv;
> + struct cx23885_dev *dev = port->dev;
> +
> + cx23885_gpio_enable(dev, GPIO_12 | GPIO_13, 1);
> +
> + switch (voltage) {
> + case SEC_VOLTAGE_13:
> + cx23885_gpio_set(dev, GPIO_13);
> + cx23885_gpio_clear(dev, GPIO_12);
> + break;
> + case SEC_VOLTAGE_18:
> + cx23885_gpio_set(dev, GPIO_13);
> + cx23885_gpio_set(dev, GPIO_12);
> + break;
> + case SEC_VOLTAGE_OFF:
> + cx23885_gpio_clear(dev, GPIO_13);
> + cx23885_gpio_clear(dev, GPIO_12);
> + break;
> + }
> + /* call the frontend set_voltage function */
> + return port->fe_set_voltage(fe, voltage);
> +}
> +
> static int cx23885_sp2_ci_ctrl(void *priv, u8 read, int addr,
> u8 data, int *mem)
> {
> @@ -878,6 +904,19 @@ static const struct m88ds3103_config dvbsky_s950c_m88ds3103_config = {
> .agc = 0x99,
> };
>
> +static const struct m88ds3103_config dvbsky_s952_portc_m88ds3103_config = {
> + .i2c_addr = 0x68,
> + .clock = 27000000,
> + .i2c_wr_max = 33,
> + .clock_out = 0,
> + .ts_mode = M88DS3103_TS_SERIAL,
> + .ts_clk = 96000,
> + .ts_clk_pol = 0,
> + .lnb_en_pol = 1,
> + .lnb_hv_pol = 0,
> + .agc = 0x99,
> +};
> +
> static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
> {
> struct cx23885_dev *dev = (struct cx23885_dev *)device;
> @@ -1034,6 +1073,8 @@ static int dvb_register(struct cx23885_tsport *port)
> struct i2c_board_info info;
> struct i2c_adapter *adapter;
> struct i2c_client *client_demod = NULL, *client_tuner = NULL, *client_ci = NULL;
> + const struct m88ds3103_config *p_m88ds3103_config = NULL;
> + int (*p_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage) = NULL;
> int mfe_shared = 0; /* bus not shared by default */
> int ret;
>
> @@ -1849,6 +1890,61 @@ static int dvb_register(struct cx23885_tsport *port)
>
> port->i2c_client_tuner = client_tuner;
> break;
> + case CX23885_BOARD_DVBSKY_S952:
> + switch (port->nr) {
> + /* port b */
> + case 1:
> + i2c_bus = &dev->i2c_bus[1];
> + p_m88ds3103_config = &dvbsky_t9580_m88ds3103_config;
> + p_set_voltage = dvbsky_t9580_set_voltage;
> + break;
> + /* port c */
> + case 2:
> + i2c_bus = &dev->i2c_bus[0];
> + p_m88ds3103_config = &dvbsky_s952_portc_m88ds3103_config;
> + p_set_voltage = dvbsky_s952_portc_set_voltage;
> + break;
> + }
> +
> + /* attach frontend */
> + fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
> + p_m88ds3103_config,
> + &i2c_bus->i2c_adap, &adapter);
> + if (fe0->dvb.frontend == NULL)
> + break;
> +
> + /* attach tuner */
> + memset(&m88ts2022_config, 0, sizeof(m88ts2022_config));
> + m88ts2022_config.fe = fe0->dvb.frontend;
> + m88ts2022_config.clock = 27000000;
> + memset(&info, 0, sizeof(struct i2c_board_info));
> + strlcpy(info.type, "m88ts2022", I2C_NAME_SIZE);
> + info.addr = 0x60;
> + info.platform_data = &m88ts2022_config;
> + request_module(info.type);
> + client_tuner = i2c_new_device(adapter, &info);
> + if (client_tuner == NULL ||
> + client_tuner->dev.driver == NULL)
> + goto frontend_detach;
> + if (!try_module_get(client_tuner->dev.driver->owner)) {
> + i2c_unregister_device(client_tuner);
> + goto frontend_detach;
> + }
> +
> + /* delegate signal strength measurement to tuner */
> + fe0->dvb.frontend->ops.read_signal_strength =
> + fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
> +
> + /*
> + * for setting the voltage we need to set GPIOs on
> + * the card.
> + */
> + port->fe_set_voltage =
> + fe0->dvb.frontend->ops.set_voltage;
> + fe0->dvb.frontend->ops.set_voltage = p_set_voltage;
> +
> + port->i2c_client_tuner = client_tuner;
> + break;
> default:
> printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
> " isn't supported yet\n",
> @@ -1924,7 +2020,8 @@ static int dvb_register(struct cx23885_tsport *port)
> break;
> }
> case CX23885_BOARD_DVBSKY_T9580:
> - case CX23885_BOARD_DVBSKY_S950: {
> + case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952: {
> u8 eeprom[256]; /* 24C02 i2c eeprom */
>
> if (port->nr > 2)
> diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c
> index 7523d0a..a1f4894 100644
> --- a/drivers/media/pci/cx23885/cx23885-input.c
> +++ b/drivers/media/pci/cx23885/cx23885-input.c
> @@ -92,6 +92,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
> case CX23885_BOARD_DVBSKY_S950C:
> case CX23885_BOARD_TT_CT2_4500_CI:
> case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> /*
> * The only boards we handle right now. However other boards
> * using the CX2388x integrated IR controller should be similar
> @@ -149,6 +150,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
> case CX23885_BOARD_DVBSKY_S950C:
> case CX23885_BOARD_TT_CT2_4500_CI:
> case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> /*
> * The IR controller on this board only returns pulse widths.
> * Any other mode setting will fail to set up the device.
> @@ -319,6 +321,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
> case CX23885_BOARD_DVBSKY_T980C:
> case CX23885_BOARD_DVBSKY_S950C:
> case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> /* Integrated CX23885 IR controller */
> driver_type = RC_DRIVER_IR_RAW;
> allowed_protos = RC_BIT_ALL;
> diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
> index f9cd0da..58c5038 100644
> --- a/drivers/media/pci/cx23885/cx23885.h
> +++ b/drivers/media/pci/cx23885/cx23885.h
> @@ -97,6 +97,7 @@
> #define CX23885_BOARD_DVBSKY_S950C 47
> #define CX23885_BOARD_TT_CT2_4500_CI 48
> #define CX23885_BOARD_DVBSKY_S950 49
> +#define CX23885_BOARD_DVBSKY_S952 50
>
> #define GPIO_0 0x00000001
> #define GPIO_1 0x00000002
>
--
http://palosaari.fi/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 2/3] cx23885: add DVBSky S952 support
2014-11-05 14:58 [PATCH 2/3] cx23885: add DVBSky S952 support Nibble Max
2014-11-05 23:13 ` Antti Palosaari
@ 2014-11-06 20:30 ` Olli Salonen
2014-11-07 7:03 ` Nibble Max
2 siblings, 0 replies; 4+ messages in thread
From: Olli Salonen @ 2014-11-06 20:30 UTC (permalink / raw)
To: Nibble Max; +Cc: linux-media
Looks good to me. Only missing T982 support now?
Reviewed-by: Olli Salonen <olli.salonen@iki.fi>
-olli
On Wed, 5 Nov 2014, Nibble Max wrote:
> DVBSky S952 dvb-s/s2 dual PCIe card:
> 1>dvb frontend: M88TS2022(tuner),M88DS3103(demod)
> 2>PCIe bridge: CX23885(port b: parallel mode, port c: serial mode)
> 3>rc: cx23885 integrated.
>
> Signed-off-by: Nibble Max <nibble.max@gmail.com>
> ---
> drivers/media/pci/cx23885/cx23885-cards.c | 22 +++++++
> drivers/media/pci/cx23885/cx23885-dvb.c | 99 ++++++++++++++++++++++++++++++-
> drivers/media/pci/cx23885/cx23885-input.c | 3 +
> drivers/media/pci/cx23885/cx23885.h | 1 +
> 4 files changed, 124 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
> index 4b9cb07..4bad27d 100644
> --- a/drivers/media/pci/cx23885/cx23885-cards.c
> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
> @@ -696,6 +696,11 @@ struct cx23885_board cx23885_boards[] = {
> .name = "DVBSky S950",
> .portb = CX23885_MPEG_DVB,
> },
> + [CX23885_BOARD_DVBSKY_S952] = {
> + .name = "DVBSky S952",
> + .portb = CX23885_MPEG_DVB,
> + .portc = CX23885_MPEG_DVB,
> + },
> };
> const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
>
> @@ -971,6 +976,10 @@ struct cx23885_subid cx23885_subids[] = {
> .subvendor = 0x4254,
> .subdevice = 0x0950,
> .card = CX23885_BOARD_DVBSKY_S950,
> + }, {
> + .subvendor = 0x4254,
> + .subdevice = 0x0952,
> + .card = CX23885_BOARD_DVBSKY_S952,
> },
> };
> const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
> @@ -1566,6 +1575,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
> mdelay(60);
> break;
> case CX23885_BOARD_DVBSKY_T9580:
> + case CX23885_BOARD_DVBSKY_S952:
> /* enable GPIO3-18 pins */
> cx_write(MC417_CTL, 0x00000037);
> cx23885_gpio_enable(dev, GPIO_2 | GPIO_11, 1);
> @@ -1697,6 +1707,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
> case CX23885_BOARD_DVBSKY_S950C:
> case CX23885_BOARD_TT_CT2_4500_CI:
> case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> if (!enable_885_ir)
> break;
> dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
> @@ -1748,6 +1759,7 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
> case CX23885_BOARD_DVBSKY_S950C:
> case CX23885_BOARD_TT_CT2_4500_CI:
> case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
> /* sd_ir is a duplicate pointer to the AV Core, just clear it */
> dev->sd_ir = NULL;
> @@ -1800,6 +1812,7 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
> case CX23885_BOARD_DVBSKY_S950C:
> case CX23885_BOARD_TT_CT2_4500_CI:
> case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> if (dev->sd_ir)
> cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
> break;
> @@ -1962,6 +1975,14 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
> ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
> break;
> + case CX23885_BOARD_DVBSKY_S952:
> + ts1->gen_ctrl_val = 0x5; /* Parallel */
> + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
> + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
> + ts2->gen_ctrl_val = 0xe; /* Serial bus */
> + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
> + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
> + break;
> case CX23885_BOARD_HAUPPAUGE_HVR1250:
> case CX23885_BOARD_HAUPPAUGE_HVR1500:
> case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
> @@ -2029,6 +2050,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> case CX23885_BOARD_DVBSKY_S950C:
> case CX23885_BOARD_TT_CT2_4500_CI:
> case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
> &dev->i2c_bus[2].i2c_adap,
> "cx25840", 0x88 >> 1, NULL);
> diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
> index 3410ab8..2457b64 100644
> --- a/drivers/media/pci/cx23885/cx23885-dvb.c
> +++ b/drivers/media/pci/cx23885/cx23885-dvb.c
> @@ -617,6 +617,32 @@ static int dvbsky_t9580_set_voltage(struct dvb_frontend *fe,
> return 0;
> }
>
> +static int dvbsky_s952_portc_set_voltage(struct dvb_frontend *fe,
> + fe_sec_voltage_t voltage)
> +{
> + struct cx23885_tsport *port = fe->dvb->priv;
> + struct cx23885_dev *dev = port->dev;
> +
> + cx23885_gpio_enable(dev, GPIO_12 | GPIO_13, 1);
> +
> + switch (voltage) {
> + case SEC_VOLTAGE_13:
> + cx23885_gpio_set(dev, GPIO_13);
> + cx23885_gpio_clear(dev, GPIO_12);
> + break;
> + case SEC_VOLTAGE_18:
> + cx23885_gpio_set(dev, GPIO_13);
> + cx23885_gpio_set(dev, GPIO_12);
> + break;
> + case SEC_VOLTAGE_OFF:
> + cx23885_gpio_clear(dev, GPIO_13);
> + cx23885_gpio_clear(dev, GPIO_12);
> + break;
> + }
> + /* call the frontend set_voltage function */
> + return port->fe_set_voltage(fe, voltage);
> +}
> +
> static int cx23885_sp2_ci_ctrl(void *priv, u8 read, int addr,
> u8 data, int *mem)
> {
> @@ -878,6 +904,19 @@ static const struct m88ds3103_config dvbsky_s950c_m88ds3103_config = {
> .agc = 0x99,
> };
>
> +static const struct m88ds3103_config dvbsky_s952_portc_m88ds3103_config = {
> + .i2c_addr = 0x68,
> + .clock = 27000000,
> + .i2c_wr_max = 33,
> + .clock_out = 0,
> + .ts_mode = M88DS3103_TS_SERIAL,
> + .ts_clk = 96000,
> + .ts_clk_pol = 0,
> + .lnb_en_pol = 1,
> + .lnb_hv_pol = 0,
> + .agc = 0x99,
> +};
> +
> static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
> {
> struct cx23885_dev *dev = (struct cx23885_dev *)device;
> @@ -1034,6 +1073,8 @@ static int dvb_register(struct cx23885_tsport *port)
> struct i2c_board_info info;
> struct i2c_adapter *adapter;
> struct i2c_client *client_demod = NULL, *client_tuner = NULL, *client_ci = NULL;
> + const struct m88ds3103_config *p_m88ds3103_config = NULL;
> + int (*p_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage) = NULL;
> int mfe_shared = 0; /* bus not shared by default */
> int ret;
>
> @@ -1849,6 +1890,61 @@ static int dvb_register(struct cx23885_tsport *port)
>
> port->i2c_client_tuner = client_tuner;
> break;
> + case CX23885_BOARD_DVBSKY_S952:
> + switch (port->nr) {
> + /* port b */
> + case 1:
> + i2c_bus = &dev->i2c_bus[1];
> + p_m88ds3103_config = &dvbsky_t9580_m88ds3103_config;
> + p_set_voltage = dvbsky_t9580_set_voltage;
> + break;
> + /* port c */
> + case 2:
> + i2c_bus = &dev->i2c_bus[0];
> + p_m88ds3103_config = &dvbsky_s952_portc_m88ds3103_config;
> + p_set_voltage = dvbsky_s952_portc_set_voltage;
> + break;
> + }
> +
> + /* attach frontend */
> + fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
> + p_m88ds3103_config,
> + &i2c_bus->i2c_adap, &adapter);
> + if (fe0->dvb.frontend == NULL)
> + break;
> +
> + /* attach tuner */
> + memset(&m88ts2022_config, 0, sizeof(m88ts2022_config));
> + m88ts2022_config.fe = fe0->dvb.frontend;
> + m88ts2022_config.clock = 27000000;
> + memset(&info, 0, sizeof(struct i2c_board_info));
> + strlcpy(info.type, "m88ts2022", I2C_NAME_SIZE);
> + info.addr = 0x60;
> + info.platform_data = &m88ts2022_config;
> + request_module(info.type);
> + client_tuner = i2c_new_device(adapter, &info);
> + if (client_tuner == NULL ||
> + client_tuner->dev.driver == NULL)
> + goto frontend_detach;
> + if (!try_module_get(client_tuner->dev.driver->owner)) {
> + i2c_unregister_device(client_tuner);
> + goto frontend_detach;
> + }
> +
> + /* delegate signal strength measurement to tuner */
> + fe0->dvb.frontend->ops.read_signal_strength =
> + fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
> +
> + /*
> + * for setting the voltage we need to set GPIOs on
> + * the card.
> + */
> + port->fe_set_voltage =
> + fe0->dvb.frontend->ops.set_voltage;
> + fe0->dvb.frontend->ops.set_voltage = p_set_voltage;
> +
> + port->i2c_client_tuner = client_tuner;
> + break;
> default:
> printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
> " isn't supported yet\n",
> @@ -1924,7 +2020,8 @@ static int dvb_register(struct cx23885_tsport *port)
> break;
> }
> case CX23885_BOARD_DVBSKY_T9580:
> - case CX23885_BOARD_DVBSKY_S950: {
> + case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952: {
> u8 eeprom[256]; /* 24C02 i2c eeprom */
>
> if (port->nr > 2)
> diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c
> index 7523d0a..a1f4894 100644
> --- a/drivers/media/pci/cx23885/cx23885-input.c
> +++ b/drivers/media/pci/cx23885/cx23885-input.c
> @@ -92,6 +92,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
> case CX23885_BOARD_DVBSKY_S950C:
> case CX23885_BOARD_TT_CT2_4500_CI:
> case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> /*
> * The only boards we handle right now. However other boards
> * using the CX2388x integrated IR controller should be similar
> @@ -149,6 +150,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
> case CX23885_BOARD_DVBSKY_S950C:
> case CX23885_BOARD_TT_CT2_4500_CI:
> case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> /*
> * The IR controller on this board only returns pulse widths.
> * Any other mode setting will fail to set up the device.
> @@ -319,6 +321,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
> case CX23885_BOARD_DVBSKY_T980C:
> case CX23885_BOARD_DVBSKY_S950C:
> case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> /* Integrated CX23885 IR controller */
> driver_type = RC_DRIVER_IR_RAW;
> allowed_protos = RC_BIT_ALL;
> diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
> index f9cd0da..58c5038 100644
> --- a/drivers/media/pci/cx23885/cx23885.h
> +++ b/drivers/media/pci/cx23885/cx23885.h
> @@ -97,6 +97,7 @@
> #define CX23885_BOARD_DVBSKY_S950C 47
> #define CX23885_BOARD_TT_CT2_4500_CI 48
> #define CX23885_BOARD_DVBSKY_S950 49
> +#define CX23885_BOARD_DVBSKY_S952 50
>
> #define GPIO_0 0x00000001
> #define GPIO_1 0x00000002
>
> --
> 1.9.1
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Re: [PATCH 2/3] cx23885: add DVBSky S952 support
2014-11-05 14:58 [PATCH 2/3] cx23885: add DVBSky S952 support Nibble Max
2014-11-05 23:13 ` Antti Palosaari
2014-11-06 20:30 ` Olli Salonen
@ 2014-11-07 7:03 ` Nibble Max
2 siblings, 0 replies; 4+ messages in thread
From: Nibble Max @ 2014-11-07 7:03 UTC (permalink / raw)
To: Olli Salonen; +Cc: linux-media
On 2014-11-07 04:31:01, Olli Salonen wrote:
>Looks good to me. Only missing T982 support now?
>
>Reviewed-by: Olli Salonen <olli.salonen@iki.fi>
>
>-olli
>
Thanks for review.
Yes, it is only missing T982 for cx23885 bridge driver.
BR,
Max
>On Wed, 5 Nov 2014, Nibble Max wrote:
>
>> DVBSky S952 dvb-s/s2 dual PCIe card:
>> 1>dvb frontend: M88TS2022(tuner),M88DS3103(demod)
>> 2>PCIe bridge: CX23885(port b: parallel mode, port c: serial mode)
>> 3>rc: cx23885 integrated.
>>
>> Signed-off-by: Nibble Max <nibble.max@gmail.com>
>> ---
>> drivers/media/pci/cx23885/cx23885-cards.c | 22 +++++++
>> drivers/media/pci/cx23885/cx23885-dvb.c | 99 ++++++++++++++++++++++++++++++-
>> drivers/media/pci/cx23885/cx23885-input.c | 3 +
>> drivers/media/pci/cx23885/cx23885.h | 1 +
>> 4 files changed, 124 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
>> index 4b9cb07..4bad27d 100644
>> --- a/drivers/media/pci/cx23885/cx23885-cards.c
>> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
>> @@ -696,6 +696,11 @@ struct cx23885_board cx23885_boards[] = {
>> .name = "DVBSky S950",
>> .portb = CX23885_MPEG_DVB,
>> },
>> + [CX23885_BOARD_DVBSKY_S952] = {
>> + .name = "DVBSky S952",
>> + .portb = CX23885_MPEG_DVB,
>> + .portc = CX23885_MPEG_DVB,
>> + },
>> };
>> const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
>>
>> @@ -971,6 +976,10 @@ struct cx23885_subid cx23885_subids[] = {
>> .subvendor = 0x4254,
>> .subdevice = 0x0950,
>> .card = CX23885_BOARD_DVBSKY_S950,
>> + }, {
>> + .subvendor = 0x4254,
>> + .subdevice = 0x0952,
>> + .card = CX23885_BOARD_DVBSKY_S952,
>> },
>> };
>> const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
>> @@ -1566,6 +1575,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
>> mdelay(60);
>> break;
>> case CX23885_BOARD_DVBSKY_T9580:
>> + case CX23885_BOARD_DVBSKY_S952:
>> /* enable GPIO3-18 pins */
>> cx_write(MC417_CTL, 0x00000037);
>> cx23885_gpio_enable(dev, GPIO_2 | GPIO_11, 1);
>> @@ -1697,6 +1707,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
>> case CX23885_BOARD_DVBSKY_S950C:
>> case CX23885_BOARD_TT_CT2_4500_CI:
>> case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952:
>> if (!enable_885_ir)
>> break;
>> dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
>> @@ -1748,6 +1759,7 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
>> case CX23885_BOARD_DVBSKY_S950C:
>> case CX23885_BOARD_TT_CT2_4500_CI:
>> case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952:
>> cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
>> /* sd_ir is a duplicate pointer to the AV Core, just clear it */
>> dev->sd_ir = NULL;
>> @@ -1800,6 +1812,7 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
>> case CX23885_BOARD_DVBSKY_S950C:
>> case CX23885_BOARD_TT_CT2_4500_CI:
>> case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952:
>> if (dev->sd_ir)
>> cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
>> break;
>> @@ -1962,6 +1975,14 @@ void cx23885_card_setup(struct cx23885_dev *dev)
>> ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
>> ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
>> break;
>> + case CX23885_BOARD_DVBSKY_S952:
>> + ts1->gen_ctrl_val = 0x5; /* Parallel */
>> + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
>> + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
>> + ts2->gen_ctrl_val = 0xe; /* Serial bus */
>> + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
>> + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
>> + break;
>> case CX23885_BOARD_HAUPPAUGE_HVR1250:
>> case CX23885_BOARD_HAUPPAUGE_HVR1500:
>> case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
>> @@ -2029,6 +2050,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
>> case CX23885_BOARD_DVBSKY_S950C:
>> case CX23885_BOARD_TT_CT2_4500_CI:
>> case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952:
>> dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
>> &dev->i2c_bus[2].i2c_adap,
>> "cx25840", 0x88 >> 1, NULL);
>> diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
>> index 3410ab8..2457b64 100644
>> --- a/drivers/media/pci/cx23885/cx23885-dvb.c
>> +++ b/drivers/media/pci/cx23885/cx23885-dvb.c
>> @@ -617,6 +617,32 @@ static int dvbsky_t9580_set_voltage(struct dvb_frontend *fe,
>> return 0;
>> }
>>
>> +static int dvbsky_s952_portc_set_voltage(struct dvb_frontend *fe,
>> + fe_sec_voltage_t voltage)
>> +{
>> + struct cx23885_tsport *port = fe->dvb->priv;
>> + struct cx23885_dev *dev = port->dev;
>> +
>> + cx23885_gpio_enable(dev, GPIO_12 | GPIO_13, 1);
>> +
>> + switch (voltage) {
>> + case SEC_VOLTAGE_13:
>> + cx23885_gpio_set(dev, GPIO_13);
>> + cx23885_gpio_clear(dev, GPIO_12);
>> + break;
>> + case SEC_VOLTAGE_18:
>> + cx23885_gpio_set(dev, GPIO_13);
>> + cx23885_gpio_set(dev, GPIO_12);
>> + break;
>> + case SEC_VOLTAGE_OFF:
>> + cx23885_gpio_clear(dev, GPIO_13);
>> + cx23885_gpio_clear(dev, GPIO_12);
>> + break;
>> + }
>> + /* call the frontend set_voltage function */
>> + return port->fe_set_voltage(fe, voltage);
>> +}
>> +
>> static int cx23885_sp2_ci_ctrl(void *priv, u8 read, int addr,
>> u8 data, int *mem)
>> {
>> @@ -878,6 +904,19 @@ static const struct m88ds3103_config dvbsky_s950c_m88ds3103_config = {
>> .agc = 0x99,
>> };
>>
>> +static const struct m88ds3103_config dvbsky_s952_portc_m88ds3103_config = {
>> + .i2c_addr = 0x68,
>> + .clock = 27000000,
>> + .i2c_wr_max = 33,
>> + .clock_out = 0,
>> + .ts_mode = M88DS3103_TS_SERIAL,
>> + .ts_clk = 96000,
>> + .ts_clk_pol = 0,
>> + .lnb_en_pol = 1,
>> + .lnb_hv_pol = 0,
>> + .agc = 0x99,
>> +};
>> +
>> static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
>> {
>> struct cx23885_dev *dev = (struct cx23885_dev *)device;
>> @@ -1034,6 +1073,8 @@ static int dvb_register(struct cx23885_tsport *port)
>> struct i2c_board_info info;
>> struct i2c_adapter *adapter;
>> struct i2c_client *client_demod = NULL, *client_tuner = NULL, *client_ci = NULL;
>> + const struct m88ds3103_config *p_m88ds3103_config = NULL;
>> + int (*p_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage) = NULL;
>> int mfe_shared = 0; /* bus not shared by default */
>> int ret;
>>
>> @@ -1849,6 +1890,61 @@ static int dvb_register(struct cx23885_tsport *port)
>>
>> port->i2c_client_tuner = client_tuner;
>> break;
>> + case CX23885_BOARD_DVBSKY_S952:
>> + switch (port->nr) {
>> + /* port b */
>> + case 1:
>> + i2c_bus = &dev->i2c_bus[1];
>> + p_m88ds3103_config = &dvbsky_t9580_m88ds3103_config;
>> + p_set_voltage = dvbsky_t9580_set_voltage;
>> + break;
>> + /* port c */
>> + case 2:
>> + i2c_bus = &dev->i2c_bus[0];
>> + p_m88ds3103_config = &dvbsky_s952_portc_m88ds3103_config;
>> + p_set_voltage = dvbsky_s952_portc_set_voltage;
>> + break;
>> + }
>> +
>> + /* attach frontend */
>> + fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
>> + p_m88ds3103_config,
>> + &i2c_bus->i2c_adap, &adapter);
>> + if (fe0->dvb.frontend == NULL)
>> + break;
>> +
>> + /* attach tuner */
>> + memset(&m88ts2022_config, 0, sizeof(m88ts2022_config));
>> + m88ts2022_config.fe = fe0->dvb.frontend;
>> + m88ts2022_config.clock = 27000000;
>> + memset(&info, 0, sizeof(struct i2c_board_info));
>> + strlcpy(info.type, "m88ts2022", I2C_NAME_SIZE);
>> + info.addr = 0x60;
>> + info.platform_data = &m88ts2022_config;
>> + request_module(info.type);
>> + client_tuner = i2c_new_device(adapter, &info);
>> + if (client_tuner == NULL ||
>> + client_tuner->dev.driver == NULL)
>> + goto frontend_detach;
>> + if (!try_module_get(client_tuner->dev.driver->owner)) {
>> + i2c_unregister_device(client_tuner);
>> + goto frontend_detach;
>> + }
>> +
>> + /* delegate signal strength measurement to tuner */
>> + fe0->dvb.frontend->ops.read_signal_strength =
>> + fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
>> +
>> + /*
>> + * for setting the voltage we need to set GPIOs on
>> + * the card.
>> + */
>> + port->fe_set_voltage =
>> + fe0->dvb.frontend->ops.set_voltage;
>> + fe0->dvb.frontend->ops.set_voltage = p_set_voltage;
>> +
>> + port->i2c_client_tuner = client_tuner;
>> + break;
>> default:
>> printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
>> " isn't supported yet\n",
>> @@ -1924,7 +2020,8 @@ static int dvb_register(struct cx23885_tsport *port)
>> break;
>> }
>> case CX23885_BOARD_DVBSKY_T9580:
>> - case CX23885_BOARD_DVBSKY_S950: {
>> + case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952: {
>> u8 eeprom[256]; /* 24C02 i2c eeprom */
>>
>> if (port->nr > 2)
>> diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c
>> index 7523d0a..a1f4894 100644
>> --- a/drivers/media/pci/cx23885/cx23885-input.c
>> +++ b/drivers/media/pci/cx23885/cx23885-input.c
>> @@ -92,6 +92,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
>> case CX23885_BOARD_DVBSKY_S950C:
>> case CX23885_BOARD_TT_CT2_4500_CI:
>> case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952:
>> /*
>> * The only boards we handle right now. However other boards
>> * using the CX2388x integrated IR controller should be similar
>> @@ -149,6 +150,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
>> case CX23885_BOARD_DVBSKY_S950C:
>> case CX23885_BOARD_TT_CT2_4500_CI:
>> case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952:
>> /*
>> * The IR controller on this board only returns pulse widths.
>> * Any other mode setting will fail to set up the device.
>> @@ -319,6 +321,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
>> case CX23885_BOARD_DVBSKY_T980C:
>> case CX23885_BOARD_DVBSKY_S950C:
>> case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952:
>> /* Integrated CX23885 IR controller */
>> driver_type = RC_DRIVER_IR_RAW;
>> allowed_protos = RC_BIT_ALL;
>> diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
>> index f9cd0da..58c5038 100644
>> --- a/drivers/media/pci/cx23885/cx23885.h
>> +++ b/drivers/media/pci/cx23885/cx23885.h
>> @@ -97,6 +97,7 @@
>> #define CX23885_BOARD_DVBSKY_S950C 47
>> #define CX23885_BOARD_TT_CT2_4500_CI 48
>> #define CX23885_BOARD_DVBSKY_S950 49
>> +#define CX23885_BOARD_DVBSKY_S952 50
>>
>> #define GPIO_0 0x00000001
>> #define GPIO_1 0x00000002
>>
>> --
>> 1.9.1
>>
>>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-11-07 7:03 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-11-05 14:58 [PATCH 2/3] cx23885: add DVBSky S952 support Nibble Max
2014-11-05 23:13 ` Antti Palosaari
2014-11-06 20:30 ` Olli Salonen
2014-11-07 7:03 ` Nibble Max
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).