* [PATCH] media: em28xx: Add support for Magix Wideowandler 2
@ 2019-09-01 21:27 Dominik Danelski
2019-09-10 20:59 ` Dominik Danelski
0 siblings, 1 reply; 3+ messages in thread
From: Dominik Danelski @ 2019-09-01 21:27 UTC (permalink / raw)
To: mchehab, linux-media; +Cc: Dominik Danelski
Add support for Magix Wideowandler 2 - analog USB capture card
Co-author: Cornelius Porosanu <cornelius591@gmail.com>
Signed-off-by: Dominik Danelski <dominik@danelski.pl>
---
drivers/media/usb/em28xx/em28xx-cards.c | 20 ++++++++++++++++++++
drivers/media/usb/em28xx/em28xx.h | 1 +
2 files changed, 21 insertions(+)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 1283c7ca9ad5..2faeb91c5afd 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -2487,6 +2487,24 @@ const struct em28xx_board em28xx_boards[] = {
.ir_codes = RC_MAP_HAUPPAUGE,
.leds = hauppauge_dualhd_leds,
},
+ /*
+ * 1b80:e349 Magix USB Videowandler-2
+ * (same chips as Honestech VIDBOX NW03)
+ * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner
+ */
+ [EM2861_BOARD_MAGIX_VIDEOWANDLER2] = {
+ .name = "Magix USB Videowandler-2",
+ .tuner_type = TUNER_ABSENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
};
EXPORT_SYMBOL_GPL(em28xx_boards);
@@ -2696,6 +2714,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM28178_BOARD_PLEX_PX_BCUD },
{ USB_DEVICE(0xeb1a, 0x5051), /* Ion Video 2 PC MKII / Startech svid2usb23 / Raygo R12-41373 */
.driver_info = EM2860_BOARD_TVP5150_REFERENCE_DESIGN },
+ { USB_DEVICE(0x1b80, 0xe349), /* Magix USB Videowandler-2 */
+ .driver_info = EM2861_BOARD_MAGIX_VIDEOWANDLER2 },
{ },
};
MODULE_DEVICE_TABLE(usb, em28xx_id_table);
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index a551072e62ed..ef8f2729f7b8 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -149,6 +149,7 @@
#define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 100
#define EM2884_BOARD_TERRATEC_H6 101
#define EM2882_BOARD_ZOLID_HYBRID_TV_STICK 102
+#define EM2861_BOARD_MAGIX_VIDEOWANDLER2 103
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
--
2.20.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] media: em28xx: Add support for Magix Wideowandler 2
2019-09-01 21:27 [PATCH] media: em28xx: Add support for Magix Wideowandler 2 Dominik Danelski
@ 2019-09-10 20:59 ` Dominik Danelski
2019-09-11 8:31 ` Sean Young
0 siblings, 1 reply; 3+ messages in thread
From: Dominik Danelski @ 2019-09-10 20:59 UTC (permalink / raw)
To: mchehab, linux-media
W dniu nie, 01.09.2019 o godzinie 23∶27 +0200, użytkownik Dominik Danelski napisał:
> Add support for Magix Wideowandler 2 - analog USB capture card
>
> Co-author: Cornelius Porosanu <cornelius591@gmail.com>
> Signed-off-by: Dominik Danelski <dominik@danelski.pl>
> ---
> drivers/media/usb/em28xx/em28xx-cards.c | 20 ++++++++++++++++++++
> drivers/media/usb/em28xx/em28xx.h | 1 +
> 2 files changed, 21 insertions(+)
>
> diff --git a/drivers/media/usb/em28xx/em28xx-cards.c
> b/drivers/media/usb/em28xx/em28xx-cards.c
> index 1283c7ca9ad5..2faeb91c5afd 100644
> --- a/drivers/media/usb/em28xx/em28xx-cards.c
> +++ b/drivers/media/usb/em28xx/em28xx-cards.c
> @@ -2487,6 +2487,24 @@ const struct em28xx_board em28xx_boards[] = {
> .ir_codes = RC_MAP_HAUPPAUGE,
> .leds = hauppauge_dualhd_leds,
> },
> + /*
> + * 1b80:e349 Magix USB Videowandler-2
> + * (same chips as Honestech VIDBOX NW03)
> + * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner
> + */
> + [EM2861_BOARD_MAGIX_VIDEOWANDLER2] = {
> + .name = "Magix USB Videowandler-2",
> + .tuner_type = TUNER_ABSENT,
> + .decoder = EM28XX_SAA711X,
> + .input = { {
> + .type = EM28XX_VMUX_COMPOSITE,
> + .vmux = SAA7115_COMPOSITE0,
> + .amux = EM28XX_AMUX_LINE_IN,
> + }, {
> + .type = EM28XX_VMUX_SVIDEO,
> + .amux = EM28XX_AMUX_LINE_IN,
> + } },
> + },
> };
> EXPORT_SYMBOL_GPL(em28xx_boards);
>
> @@ -2696,6 +2714,8 @@ struct usb_device_id em28xx_id_table[] = {
> .driver_info = EM28178_BOARD_PLEX_PX_BCUD },
> { USB_DEVICE(0xeb1a, 0x5051), /* Ion Video 2 PC MKII / Startech
> svid2usb23 / Raygo R12-41373 */
> .driver_info =
> EM2860_BOARD_TVP5150_REFERENCE_DESIGN },
> + { USB_DEVICE(0x1b80, 0xe349), /* Magix USB Videowandler-2 */
> + .driver_info = EM2861_BOARD_MAGIX_VIDEOWANDLER2 },
> { },
> };
> MODULE_DEVICE_TABLE(usb, em28xx_id_table);
> diff --git a/drivers/media/usb/em28xx/em28xx.h
> b/drivers/media/usb/em28xx/em28xx.h
> index a551072e62ed..ef8f2729f7b8 100644
> --- a/drivers/media/usb/em28xx/em28xx.h
> +++ b/drivers/media/usb/em28xx/em28xx.h
> @@ -149,6 +149,7 @@
> #define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 100
> #define EM2884_BOARD_TERRATEC_H6 101
> #define EM2882_BOARD_ZOLID_HYBRID_TV_STICK 102
> +#define EM2861_BOARD_MAGIX_VIDEOWANDLER2 103
>
> /* Limits minimum and default number of buffers */
> #define EM28XX_MIN_BUF 4
Hello,
It's been 9 days now without any reponse. Do I need to change anything in my patch to have it accepted?
Regards
Dominik Danelski
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] media: em28xx: Add support for Magix Wideowandler 2
2019-09-10 20:59 ` Dominik Danelski
@ 2019-09-11 8:31 ` Sean Young
0 siblings, 0 replies; 3+ messages in thread
From: Sean Young @ 2019-09-11 8:31 UTC (permalink / raw)
To: Dominik Danelski; +Cc: mchehab, linux-media
Hi Dominik,
On Tue, Sep 10, 2019 at 10:59:49PM +0200, Dominik Danelski wrote:
> W dniu nie, 01.09.2019 o godzinie 23∶27 +0200, użytkownik Dominik Danelski napisał:
> > Add support for Magix Wideowandler 2 - analog USB capture card
> >
> > Co-author: Cornelius Porosanu <cornelius591@gmail.com>
> > Signed-off-by: Dominik Danelski <dominik@danelski.pl>
> > ---
> > drivers/media/usb/em28xx/em28xx-cards.c | 20 ++++++++++++++++++++
> > drivers/media/usb/em28xx/em28xx.h | 1 +
> > 2 files changed, 21 insertions(+)
> >
> > diff --git a/drivers/media/usb/em28xx/em28xx-cards.c
> > b/drivers/media/usb/em28xx/em28xx-cards.c
> > index 1283c7ca9ad5..2faeb91c5afd 100644
> > --- a/drivers/media/usb/em28xx/em28xx-cards.c
> > +++ b/drivers/media/usb/em28xx/em28xx-cards.c
> > @@ -2487,6 +2487,24 @@ const struct em28xx_board em28xx_boards[] = {
> > .ir_codes = RC_MAP_HAUPPAUGE,
> > .leds = hauppauge_dualhd_leds,
> > },
> > + /*
> > + * 1b80:e349 Magix USB Videowandler-2
> > + * (same chips as Honestech VIDBOX NW03)
> > + * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner
> > + */
> > + [EM2861_BOARD_MAGIX_VIDEOWANDLER2] = {
> > + .name = "Magix USB Videowandler-2",
> > + .tuner_type = TUNER_ABSENT,
> > + .decoder = EM28XX_SAA711X,
> > + .input = { {
> > + .type = EM28XX_VMUX_COMPOSITE,
> > + .vmux = SAA7115_COMPOSITE0,
> > + .amux = EM28XX_AMUX_LINE_IN,
> > + }, {
> > + .type = EM28XX_VMUX_SVIDEO,
> > + .amux = EM28XX_AMUX_LINE_IN,
> > + } },
> > + },
> > };
> > EXPORT_SYMBOL_GPL(em28xx_boards);
> >
> > @@ -2696,6 +2714,8 @@ struct usb_device_id em28xx_id_table[] = {
> > .driver_info = EM28178_BOARD_PLEX_PX_BCUD },
> > { USB_DEVICE(0xeb1a, 0x5051), /* Ion Video 2 PC MKII / Startech
> > svid2usb23 / Raygo R12-41373 */
> > .driver_info =
> > EM2860_BOARD_TVP5150_REFERENCE_DESIGN },
> > + { USB_DEVICE(0x1b80, 0xe349), /* Magix USB Videowandler-2 */
> > + .driver_info = EM2861_BOARD_MAGIX_VIDEOWANDLER2 },
> > { },
> > };
> > MODULE_DEVICE_TABLE(usb, em28xx_id_table);
> > diff --git a/drivers/media/usb/em28xx/em28xx.h
> > b/drivers/media/usb/em28xx/em28xx.h
> > index a551072e62ed..ef8f2729f7b8 100644
> > --- a/drivers/media/usb/em28xx/em28xx.h
> > +++ b/drivers/media/usb/em28xx/em28xx.h
> > @@ -149,6 +149,7 @@
> > #define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 100
> > #define EM2884_BOARD_TERRATEC_H6 101
> > #define EM2882_BOARD_ZOLID_HYBRID_TV_STICK 102
> > +#define EM2861_BOARD_MAGIX_VIDEOWANDLER2 103
> >
> > /* Limits minimum and default number of buffers */
> > #define EM28XX_MIN_BUF 4
>
> Hello,
> It's been 9 days now without any reponse. Do I need to change anything in my patch to have it accepted?
Patch looks good. We'll merge patches once we're past the next merge window
(unless there are comments from anyone in the mean time of course).
Sean
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-09-11 8:31 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-01 21:27 [PATCH] media: em28xx: Add support for Magix Wideowandler 2 Dominik Danelski
2019-09-10 20:59 ` Dominik Danelski
2019-09-11 8:31 ` Sean Young
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).