[PATCH v3 1/2] media: dt-bindings: bind nokia,n900-ir to generic pwm-ir-tx driver

[PATCH v3 1/2] media: dt-bindings: bind nokia,n900-ir to generic pwm-ir-tx driver

[Sean Young]

The generic pwm-ir-tx driver should work for the Nokia n900.

Compile tested only.

Cc: Rob Herring <robh@kernel.org>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sean Young <sean@mess.org>
---
 arch/arm/boot/dts/omap3-n900.dts | 2 +-
 drivers/media/rc/pwm-ir-tx.c     | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 182a53991c90..fd12dea15799 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -154,7 +154,7 @@
 	};
 
 	ir: n900-ir {
-		compatible = "nokia,n900-ir";
+		compatible = "nokia,n900-ir", "pwm-ir-tx";
 		pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
 	};
 
diff --git a/drivers/media/rc/pwm-ir-tx.c b/drivers/media/rc/pwm-ir-tx.c
index 27d0f5837a76..272947b430c8 100644
--- a/drivers/media/rc/pwm-ir-tx.c
+++ b/drivers/media/rc/pwm-ir-tx.c
@@ -30,6 +30,7 @@ struct pwm_ir {
 };
 
 static const struct of_device_id pwm_ir_of_match[] = {
+	{ .compatible = "nokia,n900-ir" },
 	{ .compatible = "pwm-ir-tx", },
 	{ },
 };
-- 
2.17.1

[PATCH v3 2/2] media: rc: remove ir-rx51 in favour of generic pwm-ir-tx

[Sean Young]

The ir-rx51 is a pwm-based TX driver specific to the N900. This can be
handled entirely by the generic pwm-ir-tx driver.

Note that the suspend code in the ir-rx51 driver is unnecessary, since
during transmit, the process is not in interruptable sleep. The process
is not put to sleep until the transmit completes.

Compile tested only.

Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sean Young <sean@mess.org>
---
 arch/arm/configs/omap2plus_defconfig |   1 -
 drivers/media/rc/Kconfig             |  10 -
 drivers/media/rc/Makefile            |   1 -
 drivers/media/rc/ir-rx51.c           | 305 ---------------------------
 4 files changed, 317 deletions(-)
 delete mode 100644 drivers/media/rc/ir-rx51.c

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 6491419b1dad..1ce489a250e0 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -325,7 +325,6 @@ CONFIG_RC_CORE=m
 CONFIG_LIRC=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_SPI=m
-CONFIG_IR_RX51=m
 CONFIG_IR_GPIO_TX=m
 CONFIG_IR_PWM_TX=m
 CONFIG_MEDIA_SUPPORT=m
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 1021c08a9ba4..3817127bd240 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -377,16 +377,6 @@ config IR_TTUSBIR
 	   To compile this driver as a module, choose M here: the module will
 	   be called ttusbir.
 
-config IR_RX51
-	tristate "Nokia N900 IR transmitter diode"
-	depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS || COMPILE_TEST) && RC_CORE
-	---help---
-	   Say Y or M here if you want to enable support for the IR
-	   transmitter diode built in the Nokia N900 (RX51) device.
-
-	   The driver uses omap DM timers for generating the carrier
-	   wave and pulses.
-
 source "drivers/media/rc/img-ir/Kconfig"
 
 config RC_LOOPBACK
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index e0340d043fe8..124a823555bc 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_IR_MESON) += meson-ir.o
 obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
 obj-$(CONFIG_IR_ENE) += ene_ir.o
 obj-$(CONFIG_IR_REDRAT3) += redrat3.o
-obj-$(CONFIG_IR_RX51) += ir-rx51.o
 obj-$(CONFIG_IR_SPI) += ir-spi.o
 obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
 obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
diff --git a/drivers/media/rc/ir-rx51.c b/drivers/media/rc/ir-rx51.c
deleted file mode 100644
index 8a93f7468622..000000000000
--- a/drivers/media/rc/ir-rx51.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- *  Copyright (C) 2008 Nokia Corporation
- *
- *  Based on lirc_serial.c
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-#include <linux/clk.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/wait.h>
-#include <linux/pwm.h>
-#include <linux/of.h>
-#include <linux/hrtimer.h>
-
-#include <media/rc-core.h>
-
-#define WBUF_LEN 256
-
-struct ir_rx51 {
-	struct rc_dev *rcdev;
-	struct pwm_device *pwm;
-	struct hrtimer timer;
-	struct device	     *dev;
-	wait_queue_head_t     wqueue;
-
-	unsigned int	freq;		/* carrier frequency */
-	unsigned int	duty_cycle;	/* carrier duty cycle */
-	int		wbuf[WBUF_LEN];
-	int		wbuf_index;
-	unsigned long	device_is_open;
-};
-
-static inline void ir_rx51_on(struct ir_rx51 *ir_rx51)
-{
-	pwm_enable(ir_rx51->pwm);
-}
-
-static inline void ir_rx51_off(struct ir_rx51 *ir_rx51)
-{
-	pwm_disable(ir_rx51->pwm);
-}
-
-static int init_timing_params(struct ir_rx51 *ir_rx51)
-{
-	struct pwm_device *pwm = ir_rx51->pwm;
-	int duty, period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, ir_rx51->freq);
-
-	duty = DIV_ROUND_CLOSEST(ir_rx51->duty_cycle * period, 100);
-
-	pwm_config(pwm, duty, period);
-
-	return 0;
-}
-
-static enum hrtimer_restart ir_rx51_timer_cb(struct hrtimer *timer)
-{
-	struct ir_rx51 *ir_rx51 = container_of(timer, struct ir_rx51, timer);
-	ktime_t now;
-
-	if (ir_rx51->wbuf_index < 0) {
-		dev_err_ratelimited(ir_rx51->dev,
-				    "BUG wbuf_index has value of %i\n",
-				    ir_rx51->wbuf_index);
-		goto end;
-	}
-
-	/*
-	 * If we happen to hit an odd latency spike, loop through the
-	 * pulses until we catch up.
-	 */
-	do {
-		u64 ns;
-
-		if (ir_rx51->wbuf_index >= WBUF_LEN)
-			goto end;
-		if (ir_rx51->wbuf[ir_rx51->wbuf_index] == -1)
-			goto end;
-
-		if (ir_rx51->wbuf_index % 2)
-			ir_rx51_off(ir_rx51);
-		else
-			ir_rx51_on(ir_rx51);
-
-		ns = US_TO_NS(ir_rx51->wbuf[ir_rx51->wbuf_index]);
-		hrtimer_add_expires_ns(timer, ns);
-
-		ir_rx51->wbuf_index++;
-
-		now = timer->base->get_time();
-
-	} while (hrtimer_get_expires_tv64(timer) < now);
-
-	return HRTIMER_RESTART;
-end:
-	/* Stop TX here */
-	ir_rx51_off(ir_rx51);
-	ir_rx51->wbuf_index = -1;
-
-	wake_up_interruptible(&ir_rx51->wqueue);
-
-	return HRTIMER_NORESTART;
-}
-
-static int ir_rx51_tx(struct rc_dev *dev, unsigned int *buffer,
-		      unsigned int count)
-{
-	struct ir_rx51 *ir_rx51 = dev->priv;
-
-	if (count > WBUF_LEN)
-		return -EINVAL;
-
-	memcpy(ir_rx51->wbuf, buffer, count * sizeof(unsigned int));
-
-	/* Wait any pending transfers to finish */
-	wait_event_interruptible(ir_rx51->wqueue, ir_rx51->wbuf_index < 0);
-
-	init_timing_params(ir_rx51);
-	if (count < WBUF_LEN)
-		ir_rx51->wbuf[count] = -1; /* Insert termination mark */
-
-	/*
-	 * REVISIT: Adjust latency requirements so the device doesn't go in too
-	 * deep sleep states with pm_qos_add_request().
-	 */
-
-	ir_rx51_on(ir_rx51);
-	ir_rx51->wbuf_index = 1;
-	hrtimer_start(&ir_rx51->timer,
-		      ns_to_ktime(US_TO_NS(ir_rx51->wbuf[0])),
-		      HRTIMER_MODE_REL);
-	/*
-	 * Don't return back to the userspace until the transfer has
-	 * finished
-	 */
-	wait_event_interruptible(ir_rx51->wqueue, ir_rx51->wbuf_index < 0);
-
-	/* REVISIT: Remove pm_qos constraint, we can sleep again */
-
-	return count;
-}
-
-static int ir_rx51_open(struct rc_dev *dev)
-{
-	struct ir_rx51 *ir_rx51 = dev->priv;
-
-	if (test_and_set_bit(1, &ir_rx51->device_is_open))
-		return -EBUSY;
-
-	ir_rx51->pwm = pwm_get(ir_rx51->dev, NULL);
-	if (IS_ERR(ir_rx51->pwm)) {
-		int res = PTR_ERR(ir_rx51->pwm);
-
-		dev_err(ir_rx51->dev, "pwm_get failed: %d\n", res);
-		return res;
-	}
-
-	return 0;
-}
-
-static void ir_rx51_release(struct rc_dev *dev)
-{
-	struct ir_rx51 *ir_rx51 = dev->priv;
-
-	hrtimer_cancel(&ir_rx51->timer);
-	ir_rx51_off(ir_rx51);
-	pwm_put(ir_rx51->pwm);
-
-	clear_bit(1, &ir_rx51->device_is_open);
-}
-
-static struct ir_rx51 ir_rx51 = {
-	.duty_cycle	= 50,
-	.wbuf_index	= -1,
-};
-
-static int ir_rx51_set_duty_cycle(struct rc_dev *dev, u32 duty)
-{
-	struct ir_rx51 *ir_rx51 = dev->priv;
-
-	ir_rx51->duty_cycle = duty;
-
-	return 0;
-}
-
-static int ir_rx51_set_tx_carrier(struct rc_dev *dev, u32 carrier)
-{
-	struct ir_rx51 *ir_rx51 = dev->priv;
-
-	if (carrier > 500000 || carrier < 20000)
-		return -EINVAL;
-
-	ir_rx51->freq = carrier;
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-
-static int ir_rx51_suspend(struct platform_device *dev, pm_message_t state)
-{
-	/*
-	 * In case the device is still open, do not suspend. Normally
-	 * this should not be a problem as lircd only keeps the device
-	 * open only for short periods of time. We also don't want to
-	 * get involved with race conditions that might happen if we
-	 * were in a middle of a transmit. Thus, we defer any suspend
-	 * actions until transmit has completed.
-	 */
-	if (test_and_set_bit(1, &ir_rx51.device_is_open))
-		return -EAGAIN;
-
-	clear_bit(1, &ir_rx51.device_is_open);
-
-	return 0;
-}
-
-static int ir_rx51_resume(struct platform_device *dev)
-{
-	return 0;
-}
-
-#else
-
-#define ir_rx51_suspend	NULL
-#define ir_rx51_resume	NULL
-
-#endif /* CONFIG_PM */
-
-static int ir_rx51_probe(struct platform_device *dev)
-{
-	struct pwm_device *pwm;
-	struct rc_dev *rcdev;
-
-	pwm = pwm_get(&dev->dev, NULL);
-	if (IS_ERR(pwm)) {
-		int err = PTR_ERR(pwm);
-
-		if (err != -EPROBE_DEFER)
-			dev_err(&dev->dev, "pwm_get failed: %d\n", err);
-		return err;
-	}
-
-	/* Use default, in case userspace does not set the carrier */
-	ir_rx51.freq = DIV_ROUND_CLOSEST(pwm_get_period(pwm), NSEC_PER_SEC);
-	pwm_put(pwm);
-
-	hrtimer_init(&ir_rx51.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	ir_rx51.timer.function = ir_rx51_timer_cb;
-
-	ir_rx51.dev = &dev->dev;
-
-	rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW_TX);
-	if (!rcdev)
-		return -ENOMEM;
-
-	rcdev->priv = &ir_rx51;
-	rcdev->open = ir_rx51_open;
-	rcdev->close = ir_rx51_release;
-	rcdev->tx_ir = ir_rx51_tx;
-	rcdev->s_tx_duty_cycle = ir_rx51_set_duty_cycle;
-	rcdev->s_tx_carrier = ir_rx51_set_tx_carrier;
-	rcdev->driver_name = KBUILD_MODNAME;
-
-	ir_rx51.rcdev = rcdev;
-
-	return devm_rc_register_device(&dev->dev, ir_rx51.rcdev);
-}
-
-static int ir_rx51_remove(struct platform_device *dev)
-{
-	return 0;
-}
-
-static const struct of_device_id ir_rx51_match[] = {
-	{
-		.compatible = "nokia,n900-ir",
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, ir_rx51_match);
-
-static struct platform_driver ir_rx51_platform_driver = {
-	.probe		= ir_rx51_probe,
-	.remove		= ir_rx51_remove,
-	.suspend	= ir_rx51_suspend,
-	.resume		= ir_rx51_resume,
-	.driver		= {
-		.name	= KBUILD_MODNAME,
-		.of_match_table = of_match_ptr(ir_rx51_match),
-	},
-};
-module_platform_driver(ir_rx51_platform_driver);
-
-MODULE_DESCRIPTION("IR TX driver for Nokia RX51");
-MODULE_AUTHOR("Nokia Corporation");
-MODULE_LICENSE("GPL");
-- 
2.17.1

Re: [PATCH v3 2/2] media: rc: remove ir-rx51 in favour of generic pwm-ir-tx

[Ivaylo Dimitrov]

Hi,

On 13.07.2018 15:22, Sean Young wrote:
> The ir-rx51 is a pwm-based TX driver specific to the N900. This can be
> handled entirely by the generic pwm-ir-tx driver.
> 
> Note that the suspend code in the ir-rx51 driver is unnecessary, since
> during transmit, the process is not in interruptable sleep. The process
> is not put to sleep until the transmit completes.
> 
> Compile tested only.
> 

I would like to see this being tested on a real HW, however I am on a 
holiday for the next week so won't be able to test till I am back.

@Pali - do you have n900 with fremantle, upstream kernel and pierogi to 
test pwm-ir-tx on it?

Ivo

Re: [PATCH v3 2/2] media: rc: remove ir-rx51 in favour of generic pwm-ir-tx

[Pali Rohár]

[-- Attachment #1: Type: text/plain, Size: 916 bytes --]

On Friday 13 July 2018 17:38:25 Ivaylo Dimitrov wrote:
> Hi,
> 
> On 13.07.2018 15:22, Sean Young wrote:
> > The ir-rx51 is a pwm-based TX driver specific to the N900. This can be
> > handled entirely by the generic pwm-ir-tx driver.
> > 
> > Note that the suspend code in the ir-rx51 driver is unnecessary, since
> > during transmit, the process is not in interruptable sleep. The process
> > is not put to sleep until the transmit completes.
> > 
> > Compile tested only.
> > 
> 
> I would like to see this being tested on a real HW, however I am on a
> holiday for the next week so won't be able to test till I am back.
> 
> @Pali - do you have n900 with fremantle, upstream kernel and pierogi to test
> pwm-ir-tx on it?

Hi! Currently on my N900 with Maemo Fremantle is 2.6.28 and 3.12
kernels. And 3.12 is a far away from current upstream kernel.

-- 
Pali Rohár
pali.rohar@gmail.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH v3 2/2] media: rc: remove ir-rx51 in favour of generic pwm-ir-tx

[Sean Young]

On Fri, Jul 13, 2018 at 05:38:25PM +0300, Ivaylo Dimitrov wrote:
> Hi,
> 
> On 13.07.2018 15:22, Sean Young wrote:
> > The ir-rx51 is a pwm-based TX driver specific to the N900. This can be
> > handled entirely by the generic pwm-ir-tx driver.
> > 
> > Note that the suspend code in the ir-rx51 driver is unnecessary, since
> > during transmit, the process is not in interruptable sleep. The process
> > is not put to sleep until the transmit completes.
> > 
> > Compile tested only.
> > 
> 
> I would like to see this being tested on a real HW, however I am on a
> holiday for the next week so won't be able to test till I am back.
> 
> @Pali - do you have n900 with fremantle, upstream kernel and pierogi to test
> pwm-ir-tx on it?

It would be nice to have this verified on real hardware, if possible. If
not, I would like to merge this anyway. If there are any problems we can
always later patch any problem in pwm-ir-tx for the n900.


Sean

Re: [PATCH v3 1/2] media: dt-bindings: bind nokia,n900-ir to generic pwm-ir-tx driver

[Mauro Carvalho Chehab]

Em Fri, 13 Jul 2018 13:22:29 +0100
Sean Young <sean@mess.org> escreveu:

> The generic pwm-ir-tx driver should work for the Nokia n900.
> 
> Compile tested only.

It would be good to have some tests...

> 
> Cc: Rob Herring <robh@kernel.org>
> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
> Cc: Pali Rohár <pali.rohar@gmail.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
> Cc: Tony Lindgren <tony@atomide.com>

And some acks

Before merging it.

> Signed-off-by: Sean Young <sean@mess.org>
> ---
>  arch/arm/boot/dts/omap3-n900.dts | 2 +-
>  drivers/media/rc/pwm-ir-tx.c     | 1 +
>  2 files changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
> index 182a53991c90..fd12dea15799 100644
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -154,7 +154,7 @@
>  	};
>  
>  	ir: n900-ir {
> -		compatible = "nokia,n900-ir";
> +		compatible = "nokia,n900-ir", "pwm-ir-tx";
>  		pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
>  	};
>  
> diff --git a/drivers/media/rc/pwm-ir-tx.c b/drivers/media/rc/pwm-ir-tx.c
> index 27d0f5837a76..272947b430c8 100644
> --- a/drivers/media/rc/pwm-ir-tx.c
> +++ b/drivers/media/rc/pwm-ir-tx.c
> @@ -30,6 +30,7 @@ struct pwm_ir {
>  };
>  
>  static const struct of_device_id pwm_ir_of_match[] = {
> +	{ .compatible = "nokia,n900-ir" },
>  	{ .compatible = "pwm-ir-tx", },
>  	{ },
>  };



Thanks,
Mauro

Re: [PATCH v3 1/2] media: dt-bindings: bind nokia,n900-ir to generic pwm-ir-tx driver

[Ivaylo Dimitrov]

On 29.08.2018 20:07, Mauro Carvalho Chehab wrote:
> Em Fri, 13 Jul 2018 13:22:29 +0100
> Sean Young <sean@mess.org> escreveu:
> 
>> The generic pwm-ir-tx driver should work for the Nokia n900.
>>
>> Compile tested only.
> 
> It would be good to have some tests...
> 

Unfortunately, it turned out I won't be able to test soon, so please, 
somebody else do it.

>>
>> Cc: Rob Herring <robh@kernel.org>
>> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
>> Cc: Pali Rohár <pali.rohar@gmail.com>
>> Cc: Pavel Machek <pavel@ucw.cz>
>> Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
>> Cc: Tony Lindgren <tony@atomide.com>
> 
> And some acks
> 
> Before merging it.
> 
>> Signed-off-by: Sean Young <sean@mess.org>
>> ---
>>   arch/arm/boot/dts/omap3-n900.dts | 2 +-
>>   drivers/media/rc/pwm-ir-tx.c     | 1 +
>>   2 files changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
>> index 182a53991c90..fd12dea15799 100644
>> --- a/arch/arm/boot/dts/omap3-n900.dts
>> +++ b/arch/arm/boot/dts/omap3-n900.dts
>> @@ -154,7 +154,7 @@
>>   	};
>>   
>>   	ir: n900-ir {
>> -		compatible = "nokia,n900-ir";
>> +		compatible = "nokia,n900-ir", "pwm-ir-tx";
>>   		pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
>>   	};
>>   
>> diff --git a/drivers/media/rc/pwm-ir-tx.c b/drivers/media/rc/pwm-ir-tx.c
>> index 27d0f5837a76..272947b430c8 100644
>> --- a/drivers/media/rc/pwm-ir-tx.c
>> +++ b/drivers/media/rc/pwm-ir-tx.c
>> @@ -30,6 +30,7 @@ struct pwm_ir {
>>   };
>>   
>>   static const struct of_device_id pwm_ir_of_match[] = {
>> +	{ .compatible = "nokia,n900-ir" },
>>   	{ .compatible = "pwm-ir-tx", },
>>   	{ },
>>   };
> 
> 
> 
> Thanks,
> Mauro
> 

Re: [PATCH v3 1/2] media: dt-bindings: bind nokia,n900-ir to generic pwm-ir-tx driver

[Sakari Ailus]

Hi Sean,

On Fri, Jul 13, 2018 at 01:22:29PM +0100, Sean Young wrote:
> The generic pwm-ir-tx driver should work for the Nokia n900.
> 
> Compile tested only.
> 
> Cc: Rob Herring <robh@kernel.org>
> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
> Cc: Pali Rohár <pali.rohar@gmail.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
> Cc: Tony Lindgren <tony@atomide.com>
> Signed-off-by: Sean Young <sean@mess.org>
> ---
>  arch/arm/boot/dts/omap3-n900.dts | 2 +-
>  drivers/media/rc/pwm-ir-tx.c     | 1 +
>  2 files changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
> index 182a53991c90..fd12dea15799 100644
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -154,7 +154,7 @@
>  	};
>  
>  	ir: n900-ir {
> -		compatible = "nokia,n900-ir";
> +		compatible = "nokia,n900-ir", "pwm-ir-tx";
>  		pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
>  	};
>  
> diff --git a/drivers/media/rc/pwm-ir-tx.c b/drivers/media/rc/pwm-ir-tx.c
> index 27d0f5837a76..272947b430c8 100644
> --- a/drivers/media/rc/pwm-ir-tx.c
> +++ b/drivers/media/rc/pwm-ir-tx.c
> @@ -30,6 +30,7 @@ struct pwm_ir {
>  };
>  
>  static const struct of_device_id pwm_ir_of_match[] = {
> +	{ .compatible = "nokia,n900-ir" },

Is this change needed as well? I suppose you could add it later if there's
a need to e.g. do something differently for the N900 IR transmitter.

It'd be nice if someone tested it, too...

>  	{ .compatible = "pwm-ir-tx", },
>  	{ },
>  };

-- 
Sakari Ailus
e-mail: sakari.ailus@iki.fi

Re: [PATCH v3 1/2] media: dt-bindings: bind nokia,n900-ir to generic pwm-ir-tx driver

[Sean Young]

On Fri, Aug 31, 2018 at 11:07:23AM +0300, Sakari Ailus wrote:
> Hi Sean,
> 
> On Fri, Jul 13, 2018 at 01:22:29PM +0100, Sean Young wrote:
> > The generic pwm-ir-tx driver should work for the Nokia n900.
> > 
> > Compile tested only.
> > 
> > Cc: Rob Herring <robh@kernel.org>
> > Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
> > Cc: Pali Rohár <pali.rohar@gmail.com>
> > Cc: Pavel Machek <pavel@ucw.cz>
> > Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
> > Cc: Tony Lindgren <tony@atomide.com>
> > Signed-off-by: Sean Young <sean@mess.org>
> > ---
> >  arch/arm/boot/dts/omap3-n900.dts | 2 +-
> >  drivers/media/rc/pwm-ir-tx.c     | 1 +
> >  2 files changed, 2 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
> > index 182a53991c90..fd12dea15799 100644
> > --- a/arch/arm/boot/dts/omap3-n900.dts
> > +++ b/arch/arm/boot/dts/omap3-n900.dts
> > @@ -154,7 +154,7 @@
> >  	};
> >  
> >  	ir: n900-ir {
> > -		compatible = "nokia,n900-ir";
> > +		compatible = "nokia,n900-ir", "pwm-ir-tx";
> >  		pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
> >  	};
> >  
> > diff --git a/drivers/media/rc/pwm-ir-tx.c b/drivers/media/rc/pwm-ir-tx.c
> > index 27d0f5837a76..272947b430c8 100644
> > --- a/drivers/media/rc/pwm-ir-tx.c
> > +++ b/drivers/media/rc/pwm-ir-tx.c
> > @@ -30,6 +30,7 @@ struct pwm_ir {
> >  };
> >  
> >  static const struct of_device_id pwm_ir_of_match[] = {
> > +	{ .compatible = "nokia,n900-ir" },
> 
> Is this change needed as well? I suppose you could add it later if there's
> a need to e.g. do something differently for the N900 IR transmitter.

This is to ensure compatibility of a new kernel with an old board dtb. 

> It'd be nice if someone tested it, too...

That would be nice, but I don't have the hardware and so far I there has
been noone willing/able to test it.


Sean