* [PATCH v3 0/3] Add support for MT6315 regulator
@ 2020-12-23 12:13 Hsin-Hsiung Wang
2020-12-23 12:13 ` [PATCH v3 1/3] dt-bindings: regulator: document binding " Hsin-Hsiung Wang
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Hsin-Hsiung Wang @ 2020-12-23 12:13 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Matthias Brugger, drinkcat
Cc: devicetree, srv_heupstream, linux-kernel,
Project_Global_Chrome_Upstream_Group, linux-mediatek,
Hsin-Hsiung Wang, linux-arm-kernel
This patch series adds support for MediaTek PMIC MT6315 regulator driver,
which adds MT6315 related buck voltage data to the driver.
This series is based on below patch[1].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git/commit/?h=char-misc-next&id=d40c2d4ed62df64ce603c208bceff25245380157
changes since v2:
- fix the error of binding document.
- refine the mt6315 regulator for better code quality.
- add mt6315 regulator node into mt8192-evb.dts.
Hsin-Hsiung Wang (3):
dt-bindings: regulator: document binding for MT6315 regulator
regulator: mt6315: Add support for MT6315 regulator
arm64: dts: mt8192: add mt6315 regulator nodes
.../bindings/regulator/mt6315-regulator.yaml | 71 +++++
arch/arm64/boot/dts/mediatek/mt8192-evb.dts | 46 +++
drivers/regulator/Kconfig | 10 +
drivers/regulator/Makefile | 1 +
drivers/regulator/mt6315-regulator.c | 298 ++++++++++++++++++
include/linux/regulator/mt6315-regulator.h | 45 +++
6 files changed, 471 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
create mode 100644 drivers/regulator/mt6315-regulator.c
create mode 100644 include/linux/regulator/mt6315-regulator.h
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v3 1/3] dt-bindings: regulator: document binding for MT6315 regulator
2020-12-23 12:13 [PATCH v3 0/3] Add support for MT6315 regulator Hsin-Hsiung Wang
@ 2020-12-23 12:13 ` Hsin-Hsiung Wang
2020-12-23 17:47 ` Rob Herring
2020-12-31 15:44 ` Rob Herring
2020-12-23 12:13 ` [PATCH v3 2/3] regulator: mt6315: Add support " Hsin-Hsiung Wang
2020-12-23 12:13 ` [PATCH v3 3/3] arm64: dts: mt8192: add mt6315 regulator nodes Hsin-Hsiung Wang
2 siblings, 2 replies; 8+ messages in thread
From: Hsin-Hsiung Wang @ 2020-12-23 12:13 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Matthias Brugger, drinkcat
Cc: devicetree, srv_heupstream, linux-kernel,
Project_Global_Chrome_Upstream_Group, linux-mediatek,
Hsin-Hsiung Wang, linux-arm-kernel
Add device tree binding information for MT6315 regulator driver.
Example bindings for MT6315 are added.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
---
.../bindings/regulator/mt6315-regulator.yaml | 71 +++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
new file mode 100644
index 000000000000..15ce83a36174
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mtk,mt6315-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6315 Regulator
+
+maintainers:
+ - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
+
+description: |
+ The MT6315 is a power management IC (PMIC) configurable with SPMI.
+ that contains 4 BUCKs output which can combine with each other
+ by different efuse settings.
+
+properties:
+ compatible:
+ const: mediatek,mt6315-regulator
+
+ reg:
+ maxItems: 1
+
+ regulators:
+ type: object
+ description: List of regulators and its properties
+
+ patternProperties:
+ "^vbuck[1-4]$":
+ type: object
+ $ref: "regulator.yaml#"
+
+ properties:
+ regulator-name:
+ pattern: "^vbuck[1-4]$"
+ description:
+ should be "vbuck1", ..., "vbuck4"
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic@6 {
+ compatible = "mediatek,mt6315-regulator";
+ reg = <0x6 0 0xb 1>;
+
+ regulators {
+ vbuck1 {
+ regulator-compatible = "vbuck1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-enable-ramp-delay = <256>;
+ regulator-allowed-modes = <0 1 2 4>;
+ };
+
+ vbuck3 {
+ regulator-compatible = "vbuck3";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-enable-ramp-delay = <256>;
+ regulator-allowed-modes = <0 1 2 4>;
+ };
+ };
+ };
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v3 2/3] regulator: mt6315: Add support for MT6315 regulator
2020-12-23 12:13 [PATCH v3 0/3] Add support for MT6315 regulator Hsin-Hsiung Wang
2020-12-23 12:13 ` [PATCH v3 1/3] dt-bindings: regulator: document binding " Hsin-Hsiung Wang
@ 2020-12-23 12:13 ` Hsin-Hsiung Wang
2020-12-24 0:38 ` Nicolas Boichat
2020-12-23 12:13 ` [PATCH v3 3/3] arm64: dts: mt8192: add mt6315 regulator nodes Hsin-Hsiung Wang
2 siblings, 1 reply; 8+ messages in thread
From: Hsin-Hsiung Wang @ 2020-12-23 12:13 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Matthias Brugger, drinkcat
Cc: devicetree, srv_heupstream, linux-kernel,
Project_Global_Chrome_Upstream_Group, linux-mediatek,
Hsin-Hsiung Wang, linux-arm-kernel
The MT6315 is a regulator found on boards based on MediaTek MT8192 and
probably other SoCs. It connects as a slave to SoC using SPMI.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
---
drivers/regulator/Kconfig | 10 +
drivers/regulator/Makefile | 1 +
drivers/regulator/mt6315-regulator.c | 298 +++++++++++++++++++++
include/linux/regulator/mt6315-regulator.h | 45 ++++
4 files changed, 354 insertions(+)
create mode 100644 drivers/regulator/mt6315-regulator.c
create mode 100644 include/linux/regulator/mt6315-regulator.h
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 020a00d6696b..65612ba2734f 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -703,6 +703,16 @@ config REGULATOR_MT6311
This driver supports the control of different power rails of device
through regulator interface.
+config REGULATOR_MT6315
+ tristate "MediaTek MT6315 PMIC"
+ depends on SPMI
+ select REGMAP_SPMI
+ help
+ Say y here to select this option to enable the power regulator of
+ MediaTek MT6315 PMIC.
+ This driver supports the control of different power rails of device
+ through regulator interface.
+
config REGULATOR_MT6323
tristate "MediaTek MT6323 PMIC"
depends on MFD_MT6397
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 6ebae516258e..b2f47dd67112 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -87,6 +87,7 @@ obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o
obj-$(CONFIG_REGULATOR_MP886X) += mp886x.o
obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
+obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o
obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
diff --git a/drivers/regulator/mt6315-regulator.c b/drivers/regulator/mt6315-regulator.c
new file mode 100644
index 000000000000..57ef628d48b4
--- /dev/null
+++ b/drivers/regulator/mt6315-regulator.c
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 MediaTek Inc.
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6315-regulator.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/spmi.h>
+
+#define MT6315_REG_WIDTH 8
+
+#define MT6315_BUCK_MODE_AUTO 0
+#define MT6315_BUCK_MODE_FORCE_PWM 1
+#define MT6315_BUCK_MODE_LP 2
+
+struct mt6315_regulator_info {
+ struct regulator_desc desc;
+ u32 status_reg;
+ u32 lp_mode_mask;
+ u32 lp_mode_shift;
+};
+
+struct mt_regulator_init_data {
+ u32 slvid;
+ u32 modeset_mask[MT6315_VBUCK_MAX];
+};
+
+struct mt6315_chip {
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+#define MT_BUCK(_name, _bid, _vsel) \
+[_bid] = { \
+ .desc = { \
+ .name = _name, \
+ .of_match = of_match_ptr(_name), \
+ .regulators_node = "regulators", \
+ .ops = &mt6315_volt_range_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = _bid, \
+ .owner = THIS_MODULE, \
+ .n_voltages = 0xbf, \
+ .linear_ranges = mt_volt_range1, \
+ .n_linear_ranges = ARRAY_SIZE(mt_volt_range1), \
+ .vsel_reg = _vsel, \
+ .vsel_mask = 0xff, \
+ .enable_reg = MT6315_BUCK_TOP_CON0, \
+ .enable_mask = BIT(_bid), \
+ .of_map_mode = mt6315_map_mode, \
+ }, \
+ .status_reg = _bid##_DBG4, \
+ .lp_mode_mask = BIT(_bid), \
+ .lp_mode_shift = _bid, \
+}
+
+static const struct linear_range mt_volt_range1[] = {
+ REGULATOR_LINEAR_RANGE(0, 0, 0xbf, 6250),
+};
+
+static unsigned int mt6315_map_mode(u32 mode)
+{
+ switch (mode) {
+ case MT6315_BUCK_MODE_AUTO:
+ return REGULATOR_MODE_NORMAL;
+ case MT6315_BUCK_MODE_FORCE_PWM:
+ return REGULATOR_MODE_FAST;
+ case MT6315_BUCK_MODE_LP:
+ return REGULATOR_MODE_IDLE;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned int mt6315_regulator_get_mode(struct regulator_dev *rdev)
+{
+ struct mt_regulator_init_data *init = rdev_get_drvdata(rdev);
+ const struct mt6315_regulator_info *info = (struct mt6315_regulator_info *)rdev->desc;
+ int ret, regval;
+ u32 modeset_mask;
+
+ modeset_mask = init->modeset_mask[rdev_get_id(rdev)];
+ ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_4PHASE_ANA_CON42, ®val);
+ if (ret != 0) {
+ dev_notice(&rdev->dev, "Failed to get mode: %d\n", ret);
+ return ret;
+ }
+
+ if ((regval & modeset_mask) == modeset_mask)
+ return REGULATOR_MODE_FAST;
+
+ ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_CON1, ®val);
+ if (ret != 0) {
+ dev_notice(&rdev->dev, "Failed to get lp mode: %d\n", ret);
+ return ret;
+ }
+
+ if (regval & info->lp_mode_mask)
+ return REGULATOR_MODE_IDLE;
+ else
+ return REGULATOR_MODE_NORMAL;
+}
+
+static int mt6315_regulator_set_mode(struct regulator_dev *rdev,
+ u32 mode)
+{
+ struct mt_regulator_init_data *init = rdev_get_drvdata(rdev);
+ const struct mt6315_regulator_info *info = (struct mt6315_regulator_info *)rdev->desc;
+ int ret, val, curr_mode;
+ u32 modeset_mask;
+
+ modeset_mask = init->modeset_mask[rdev_get_id(rdev)];
+ curr_mode = mt6315_regulator_get_mode(rdev);
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ ret = regmap_update_bits(rdev->regmap,
+ MT6315_BUCK_TOP_4PHASE_ANA_CON42,
+ modeset_mask,
+ modeset_mask);
+ break;
+ case REGULATOR_MODE_NORMAL:
+ if (curr_mode == REGULATOR_MODE_FAST) {
+ ret = regmap_update_bits(rdev->regmap,
+ MT6315_BUCK_TOP_4PHASE_ANA_CON42,
+ modeset_mask,
+ 0);
+ } else if (curr_mode == REGULATOR_MODE_IDLE) {
+ ret = regmap_update_bits(rdev->regmap,
+ MT6315_BUCK_TOP_CON1,
+ info->lp_mode_mask,
+ 0);
+ usleep_range(100, 110);
+ }
+ break;
+ case REGULATOR_MODE_IDLE:
+ val = MT6315_BUCK_MODE_LP >> 1;
+ val <<= info->lp_mode_shift;
+ ret = regmap_update_bits(rdev->regmap,
+ MT6315_BUCK_TOP_CON1,
+ info->lp_mode_mask,
+ val);
+ break;
+ default:
+ ret = -EINVAL;
+ dev_notice(&rdev->dev, "Not support (%d)\n", mode);
+ break;
+ }
+
+ if (ret != 0) {
+ dev_notice(&rdev->dev, "Failed to set mode: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mt6315_get_status(struct regulator_dev *rdev)
+{
+ const struct mt6315_regulator_info *info = (struct mt6315_regulator_info *)rdev->desc;
+ int ret;
+ u32 regval;
+
+ ret = regmap_read(rdev->regmap, info->status_reg, ®val);
+ if (ret < 0) {
+ dev_notice(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+ return ret;
+ }
+
+ return (regval & BIT(0)) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static const struct regulator_ops mt6315_volt_range_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = mt6315_get_status,
+ .set_mode = mt6315_regulator_set_mode,
+ .get_mode = mt6315_regulator_get_mode,
+};
+
+static const struct mt6315_regulator_info mt6315_regulators[MT6315_VBUCK_MAX] = {
+ MT_BUCK("vbuck1", MT6315_VBUCK1, MT6315_BUCK_TOP_ELR0),
+ MT_BUCK("vbuck2", MT6315_VBUCK2, MT6315_BUCK_TOP_ELR2),
+ MT_BUCK("vbuck3", MT6315_VBUCK3, MT6315_BUCK_TOP_ELR4),
+ MT_BUCK("vbuck4", MT6315_VBUCK4, MT6315_BUCK_TOP_ELR6),
+};
+
+static const struct regmap_config mt6315_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .max_register = 0x16d0,
+ .fast_io = true,
+};
+
+static const struct of_device_id mt6315_of_match[] = {
+ {
+ .compatible = "mediatek,mt6315-regulator",
+ }, {
+ /* sentinel */
+ },
+};
+MODULE_DEVICE_TABLE(of, mt6315_of_match);
+
+static int mt6315_regulator_probe(struct spmi_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ struct mt6315_chip *chip;
+ struct mt_regulator_init_data *init_data;
+ struct regulator_config config = {};
+ struct regulator_dev *rdev;
+ int i;
+
+ regmap = devm_regmap_init_spmi_ext(pdev, &mt6315_regmap_config);
+ if (!regmap)
+ return -ENODEV;
+
+ chip = devm_kzalloc(dev, sizeof(struct mt6315_chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ init_data = devm_kzalloc(dev, sizeof(struct mt_regulator_init_data), GFP_KERNEL);
+ if (!init_data)
+ return -ENOMEM;
+
+ chip->dev = dev;
+ chip->regmap = regmap;
+ dev_set_drvdata(dev, chip);
+
+ config.dev = dev;
+ config.regmap = regmap;
+ for (i = MT6315_VBUCK1; i < MT6315_VBUCK_MAX; i++) {
+ init_data->modeset_mask[i] = 1 << (i - 1);
+ config.driver_data = init_data;
+ rdev = devm_regulator_register(dev, &mt6315_regulators[i].desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_notice(dev, "Failed to register %s\n", mt6315_regulators[i].desc.name);
+ continue;
+ }
+ }
+
+ init_data->slvid = pdev->usid;
+ switch (init_data->slvid) {
+ case MT6315_CPU:
+ init_data->modeset_mask[MT6315_VBUCK1] = 0xB;
+ break;
+ case MT6315_GPU:
+ case MT6315_MD:
+ init_data->modeset_mask[MT6315_VBUCK1] = 0x3;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static void mt6315_regulator_shutdown(struct spmi_device *pdev)
+{
+ struct mt6315_chip *chip = dev_get_drvdata(&pdev->dev);
+ int ret = 0;
+
+ ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY_H, PROTECTION_KEY_H);
+ ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY, PROTECTION_KEY);
+ ret |= regmap_update_bits(chip->regmap, MT6315_TOP2_ELR7, 1, 1);
+ ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY, 0);
+ ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY_H, 0);
+ if (ret < 0)
+ dev_notice(&pdev->dev, "[%#x] Failed to enable power off sequence. %d\n",
+ pdev->usid, ret);
+}
+
+static struct spmi_driver mt6315_regulator_driver = {
+ .driver = {
+ .name = "mt6315-regulator",
+ .of_match_table = mt6315_of_match,
+ },
+ .probe = mt6315_regulator_probe,
+ .shutdown = mt6315_regulator_shutdown,
+};
+
+module_spmi_driver(mt6315_regulator_driver);
+
+MODULE_AUTHOR("Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6315 PMIC");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/regulator/mt6315-regulator.h b/include/linux/regulator/mt6315-regulator.h
new file mode 100644
index 000000000000..38bf365de24d
--- /dev/null
+++ b/include/linux/regulator/mt6315-regulator.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ */
+
+#ifndef __LINUX_REGULATOR_MT6315_H
+#define __LINUX_REGULATOR_MT6315_H
+
+#define MT6315_MD 3
+#define MT6315_CPU 6
+#define MT6315_GPU 7
+
+enum {
+ MT6315_VBUCK1 = 0,
+ MT6315_VBUCK2,
+ MT6315_VBUCK3,
+ MT6315_VBUCK4,
+ MT6315_VBUCK_MAX,
+};
+
+/* Register */
+#define MT6315_SWCID_H 0xC
+#define MT6315_TOP2_ELR7 0x139
+#define MT6315_TOP_TMA_KEY 0x39F
+#define MT6315_TOP_TMA_KEY_H 0x3A0
+#define MT6315_BUCK_TOP_CON0 0x1440
+#define MT6315_BUCK_TOP_CON1 0x1443
+#define MT6315_BUCK_TOP_ELR0 0x1449
+#define MT6315_BUCK_TOP_ELR2 0x144B
+#define MT6315_BUCK_TOP_ELR4 0x144D
+#define MT6315_BUCK_TOP_ELR6 0x144F
+#define MT6315_VBUCK1_DBG0 0x1499
+#define MT6315_VBUCK1_DBG4 0x149D
+#define MT6315_VBUCK2_DBG0 0x1519
+#define MT6315_VBUCK2_DBG4 0x151D
+#define MT6315_VBUCK3_DBG0 0x1599
+#define MT6315_VBUCK3_DBG4 0x159D
+#define MT6315_VBUCK4_DBG0 0x1619
+#define MT6315_VBUCK4_DBG4 0x161D
+#define MT6315_BUCK_TOP_4PHASE_ANA_CON42 0x16B1
+
+#define PROTECTION_KEY_H 0x9C
+#define PROTECTION_KEY 0xEA
+
+#endif /* __LINUX_REGULATOR_MT6315_H */
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v3 3/3] arm64: dts: mt8192: add mt6315 regulator nodes
2020-12-23 12:13 [PATCH v3 0/3] Add support for MT6315 regulator Hsin-Hsiung Wang
2020-12-23 12:13 ` [PATCH v3 1/3] dt-bindings: regulator: document binding " Hsin-Hsiung Wang
2020-12-23 12:13 ` [PATCH v3 2/3] regulator: mt6315: Add support " Hsin-Hsiung Wang
@ 2020-12-23 12:13 ` Hsin-Hsiung Wang
2020-12-27 8:44 ` kernel test robot
2 siblings, 1 reply; 8+ messages in thread
From: Hsin-Hsiung Wang @ 2020-12-23 12:13 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Matthias Brugger, drinkcat
Cc: devicetree, srv_heupstream, linux-kernel,
Project_Global_Chrome_Upstream_Group, linux-mediatek,
Hsin-Hsiung Wang, linux-arm-kernel
Add MT6315 regulator nodes to MT8192 evaluation board.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8192-evb.dts | 46 +++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
index 0205837fa698..6c1e2b3e8a60 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
@@ -24,6 +24,52 @@
};
};
+&spmi {
+ grpid = <11>;
+ mt6315_6: pmic@6 {
+ compatible = "mediatek,mt6315-regulator";
+ reg = <0x6 0 0xb 1>;
+
+ regulators {
+ mt6315_6_vbuck1: vbuck1 {
+ regulator-compatible = "vbuck1";
+ regulator-name = "Vbcpu";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-enable-ramp-delay = <256>;
+ regulator-allowed-modes = <0 1 2 4>;
+ regulator-always-on;
+ };
+
+ mt6315_6_vbuck3: vbuck3 {
+ regulator-compatible = "vbuck3";
+ regulator-name = "Vlcpu";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-enable-ramp-delay = <256>;
+ regulator-allowed-modes = <0 1 2 4>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ mt6315_7: pmic@7 {
+ compatible = "mediatek,mt6315-regulator";
+ reg = <0x7 0 0xb 1>;
+
+ regulators {
+ mt6315_7_vbuck1: vbuck1 {
+ regulator-compatible = "vbuck1";
+ regulator-name = "Vgpu";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-enable-ramp-delay = <256>;
+ regulator-allowed-modes = <0 1 2 4>;
+ };
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v3 1/3] dt-bindings: regulator: document binding for MT6315 regulator
2020-12-23 12:13 ` [PATCH v3 1/3] dt-bindings: regulator: document binding " Hsin-Hsiung Wang
@ 2020-12-23 17:47 ` Rob Herring
2020-12-31 15:44 ` Rob Herring
1 sibling, 0 replies; 8+ messages in thread
From: Rob Herring @ 2020-12-23 17:47 UTC (permalink / raw)
To: Hsin-Hsiung Wang
Cc: devicetree, drinkcat, srv_heupstream, Mark Brown, linux-kernel,
Liam Girdwood, Project_Global_Chrome_Upstream_Group, Rob Herring,
linux-mediatek, Matthias Brugger, linux-arm-kernel
On Wed, 23 Dec 2020 20:13:42 +0800, Hsin-Hsiung Wang wrote:
> Add device tree binding information for MT6315 regulator driver.
> Example bindings for MT6315 are added.
>
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> ---
> .../bindings/regulator/mt6315-regulator.yaml | 71 +++++++++++++++++++
> 1 file changed, 71 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml: $id: relative path/filename doesn't match actual path or filename
expected: http://devicetree.org/schemas/regulator/mt6315-regulator.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/mt6315-regulator.example.dt.yaml: example-0: pmic@6:reg:0: [6, 0, 11, 1] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
See https://patchwork.ozlabs.org/patch/1420117
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3 2/3] regulator: mt6315: Add support for MT6315 regulator
2020-12-23 12:13 ` [PATCH v3 2/3] regulator: mt6315: Add support " Hsin-Hsiung Wang
@ 2020-12-24 0:38 ` Nicolas Boichat
0 siblings, 0 replies; 8+ messages in thread
From: Nicolas Boichat @ 2020-12-24 0:38 UTC (permalink / raw)
To: Hsin-Hsiung Wang
Cc: Devicetree List, srv_heupstream, Liam Girdwood, Rob Herring,
lkml, Project_Global_Chrome_Upstream_Group, Mark Brown,
moderated list:ARM/Mediatek SoC support, Matthias Brugger,
linux-arm Mailing List
On Wed, Dec 23, 2020 at 8:13 PM Hsin-Hsiung Wang
<hsin-hsiung.wang@mediatek.com> wrote:
>
> The MT6315 is a regulator found on boards based on MediaTek MT8192 and
> probably other SoCs. It connects as a slave to SoC using SPMI.
>
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> ---
> drivers/regulator/Kconfig | 10 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/mt6315-regulator.c | 298 +++++++++++++++++++++
> include/linux/regulator/mt6315-regulator.h | 45 ++++
> 4 files changed, 354 insertions(+)
> create mode 100644 drivers/regulator/mt6315-regulator.c
> create mode 100644 include/linux/regulator/mt6315-regulator.h
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index 020a00d6696b..65612ba2734f 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -703,6 +703,16 @@ config REGULATOR_MT6311
> This driver supports the control of different power rails of device
> through regulator interface.
>
> +config REGULATOR_MT6315
> + tristate "MediaTek MT6315 PMIC"
> + depends on SPMI
> + select REGMAP_SPMI
> + help
> + Say y here to select this option to enable the power regulator of
> + MediaTek MT6315 PMIC.
> + This driver supports the control of different power rails of device
> + through regulator interface.
> +
> config REGULATOR_MT6323
> tristate "MediaTek MT6323 PMIC"
> depends on MFD_MT6397
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 6ebae516258e..b2f47dd67112 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -87,6 +87,7 @@ obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o
> obj-$(CONFIG_REGULATOR_MP886X) += mp886x.o
> obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
> obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
> +obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
> obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
> obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o
> obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
> diff --git a/drivers/regulator/mt6315-regulator.c b/drivers/regulator/mt6315-regulator.c
> new file mode 100644
> index 000000000000..57ef628d48b4
> --- /dev/null
> +++ b/drivers/regulator/mt6315-regulator.c
> @@ -0,0 +1,298 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (c) 2020 MediaTek Inc.
> +
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
Do you need this one? I don't see any IRQ-related function
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/regulator/mt6315-regulator.h>
> +#include <linux/regulator/of_regulator.h>
> +#include <linux/spmi.h>
> +
> +#define MT6315_REG_WIDTH 8
Unused.
> +
> +#define MT6315_BUCK_MODE_AUTO 0
> +#define MT6315_BUCK_MODE_FORCE_PWM 1
> +#define MT6315_BUCK_MODE_LP 2
> +
> +struct mt6315_regulator_info {
> + struct regulator_desc desc;
> + u32 status_reg;
> + u32 lp_mode_mask;
> + u32 lp_mode_shift;
> +};
> +
> +struct mt_regulator_init_data {
> + u32 slvid;
> + u32 modeset_mask[MT6315_VBUCK_MAX];
> +};
> +
> +struct mt6315_chip {
> + struct device *dev;
> + struct regmap *regmap;
> +};
> +
> +#define MT_BUCK(_name, _bid, _vsel) \
> +[_bid] = { \
> + .desc = { \
> + .name = _name, \
> + .of_match = of_match_ptr(_name), \
> + .regulators_node = "regulators", \
> + .ops = &mt6315_volt_range_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .id = _bid, \
> + .owner = THIS_MODULE, \
> + .n_voltages = 0xbf, \
> + .linear_ranges = mt_volt_range1, \
> + .n_linear_ranges = ARRAY_SIZE(mt_volt_range1), \
> + .vsel_reg = _vsel, \
> + .vsel_mask = 0xff, \
> + .enable_reg = MT6315_BUCK_TOP_CON0, \
> + .enable_mask = BIT(_bid), \
> + .of_map_mode = mt6315_map_mode, \
> + }, \
> + .status_reg = _bid##_DBG4, \
> + .lp_mode_mask = BIT(_bid), \
> + .lp_mode_shift = _bid, \
> +}
> +
> +static const struct linear_range mt_volt_range1[] = {
> + REGULATOR_LINEAR_RANGE(0, 0, 0xbf, 6250),
> +};
> +
> +static unsigned int mt6315_map_mode(u32 mode)
> +{
> + switch (mode) {
> + case MT6315_BUCK_MODE_AUTO:
> + return REGULATOR_MODE_NORMAL;
> + case MT6315_BUCK_MODE_FORCE_PWM:
> + return REGULATOR_MODE_FAST;
> + case MT6315_BUCK_MODE_LP:
> + return REGULATOR_MODE_IDLE;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static unsigned int mt6315_regulator_get_mode(struct regulator_dev *rdev)
> +{
> + struct mt_regulator_init_data *init = rdev_get_drvdata(rdev);
> + const struct mt6315_regulator_info *info = (struct mt6315_regulator_info *)rdev->desc;
This is a little bit scary at first sight, please use container_of instead:
container_of(rdev->desc, struct mt6315_regulator_info, desc)
> + int ret, regval;
> + u32 modeset_mask;
> +
> + modeset_mask = init->modeset_mask[rdev_get_id(rdev)];
> + ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_4PHASE_ANA_CON42, ®val);
> + if (ret != 0) {
> + dev_notice(&rdev->dev, "Failed to get mode: %d\n", ret);
> + return ret;
> + }
> +
> + if ((regval & modeset_mask) == modeset_mask)
> + return REGULATOR_MODE_FAST;
> +
> + ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_CON1, ®val);
> + if (ret != 0) {
> + dev_notice(&rdev->dev, "Failed to get lp mode: %d\n", ret);
> + return ret;
> + }
> +
> + if (regval & info->lp_mode_mask)
> + return REGULATOR_MODE_IDLE;
> + else
> + return REGULATOR_MODE_NORMAL;
> +}
> +
> +static int mt6315_regulator_set_mode(struct regulator_dev *rdev,
> + u32 mode)
> +{
> + struct mt_regulator_init_data *init = rdev_get_drvdata(rdev);
> + const struct mt6315_regulator_info *info = (struct mt6315_regulator_info *)rdev->desc;
ditto (container_of)
> + int ret, val, curr_mode;
> + u32 modeset_mask;
> +
> + modeset_mask = init->modeset_mask[rdev_get_id(rdev)];
> + curr_mode = mt6315_regulator_get_mode(rdev);
> + switch (mode) {
> + case REGULATOR_MODE_FAST:
This seems to assume that you can't transition from
REGULATOR_MODE_IDLE to REGULATOR_MODE_FAST directly? Is that
guaranteed?
> + ret = regmap_update_bits(rdev->regmap,
> + MT6315_BUCK_TOP_4PHASE_ANA_CON42,
> + modeset_mask,
> + modeset_mask);
> + break;
> + case REGULATOR_MODE_NORMAL:
> + if (curr_mode == REGULATOR_MODE_FAST) {
> + ret = regmap_update_bits(rdev->regmap,
> + MT6315_BUCK_TOP_4PHASE_ANA_CON42,
> + modeset_mask,
> + 0);
> + } else if (curr_mode == REGULATOR_MODE_IDLE) {
> + ret = regmap_update_bits(rdev->regmap,
> + MT6315_BUCK_TOP_CON1,
> + info->lp_mode_mask,
> + 0);
> + usleep_range(100, 110);
> + }
> + break;
> + case REGULATOR_MODE_IDLE:
> + val = MT6315_BUCK_MODE_LP >> 1;
> + val <<= info->lp_mode_shift;
> + ret = regmap_update_bits(rdev->regmap,
> + MT6315_BUCK_TOP_CON1,
> + info->lp_mode_mask,
> + val);
> + break;
> + default:
> + ret = -EINVAL;
> + dev_notice(&rdev->dev, "Not support (%d)\n", mode);
"Unsupported mode: %d\n"
> + break;
> + }
> +
> + if (ret != 0) {
> + dev_notice(&rdev->dev, "Failed to set mode: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int mt6315_get_status(struct regulator_dev *rdev)
> +{
> + const struct mt6315_regulator_info *info = (struct mt6315_regulator_info *)rdev->desc;
ditto (container_of)
> + int ret;
> + u32 regval;
> +
> + ret = regmap_read(rdev->regmap, info->status_reg, ®val);
> + if (ret < 0) {
> + dev_notice(&rdev->dev, "Failed to get enable reg: %d\n", ret);
> + return ret;
> + }
> +
> + return (regval & BIT(0)) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
> +}
> +
> +static const struct regulator_ops mt6315_volt_range_ops = {
> + .list_voltage = regulator_list_voltage_linear_range,
> + .map_voltage = regulator_map_voltage_linear_range,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> + .set_voltage_time_sel = regulator_set_voltage_time_sel,
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .is_enabled = regulator_is_enabled_regmap,
> + .get_status = mt6315_get_status,
> + .set_mode = mt6315_regulator_set_mode,
> + .get_mode = mt6315_regulator_get_mode,
> +};
> +
> +static const struct mt6315_regulator_info mt6315_regulators[MT6315_VBUCK_MAX] = {
> + MT_BUCK("vbuck1", MT6315_VBUCK1, MT6315_BUCK_TOP_ELR0),
> + MT_BUCK("vbuck2", MT6315_VBUCK2, MT6315_BUCK_TOP_ELR2),
> + MT_BUCK("vbuck3", MT6315_VBUCK3, MT6315_BUCK_TOP_ELR4),
> + MT_BUCK("vbuck4", MT6315_VBUCK4, MT6315_BUCK_TOP_ELR6),
> +};
> +
> +static const struct regmap_config mt6315_regmap_config = {
> + .reg_bits = 16,
> + .val_bits = 8,
> + .max_register = 0x16d0,
> + .fast_io = true,
> +};
> +
> +static const struct of_device_id mt6315_of_match[] = {
> + {
> + .compatible = "mediatek,mt6315-regulator",
> + }, {
> + /* sentinel */
> + },
> +};
> +MODULE_DEVICE_TABLE(of, mt6315_of_match);
> +
> +static int mt6315_regulator_probe(struct spmi_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct regmap *regmap;
> + struct mt6315_chip *chip;
> + struct mt_regulator_init_data *init_data;
> + struct regulator_config config = {};
> + struct regulator_dev *rdev;
> + int i;
> +
> + regmap = devm_regmap_init_spmi_ext(pdev, &mt6315_regmap_config);
> + if (!regmap)
> + return -ENODEV;
> +
> + chip = devm_kzalloc(dev, sizeof(struct mt6315_chip), GFP_KERNEL);
> + if (!chip)
> + return -ENOMEM;
> +
> + init_data = devm_kzalloc(dev, sizeof(struct mt_regulator_init_data), GFP_KERNEL);
> + if (!init_data)
> + return -ENOMEM;
> +
> + chip->dev = dev;
> + chip->regmap = regmap;
> + dev_set_drvdata(dev, chip);
> +
> + config.dev = dev;
> + config.regmap = regmap;
> + for (i = MT6315_VBUCK1; i < MT6315_VBUCK_MAX; i++) {
> + init_data->modeset_mask[i] = 1 << (i - 1);
BIT(i-1)
But, wait, MT6315_VBUCK1 is 0 right? Should this just be 1 << i ==> BIT(i) ?
> + config.driver_data = init_data;
> + rdev = devm_regulator_register(dev, &mt6315_regulators[i].desc, &config);
This also initializes the regulators 2,4 on MT6315_CPU, is that ok?
I'd assume we'd not want to initialize those linked regulators (and
that's what your previous change did)
> + if (IS_ERR(rdev)) {
> + dev_notice(dev, "Failed to register %s\n", mt6315_regulators[i].desc.name);
> + continue;
> + }
It feels incorrect to call devm_regulator_register before modeset_mask
has been set properly...
2 options:
1. Fold the logic below into this loop.
2. Something like this:
switch (init_data->slvid) {
init_data->modeset_mask[MT6315_VBUCK1] = 0x3, 0xB, or default 0x1;
}
for (i = MT6315_VBUCK2; i < MT6315_VBUCK_MAX; i++)
init_data->modeset_mask[i] = 1 << i;
for (i = MT6315_VBUCK1; i < MT6315_VBUCK_MAX; i++) {
devm_regulator_register()
}
> + }
> +
> + init_data->slvid = pdev->usid;
> + switch (init_data->slvid) {
Just use pdev->usid directly here? (you don't use init_data->slvid
anywhere else so it doesn't seem useful to copy it)
> + case MT6315_CPU:
> + init_data->modeset_mask[MT6315_VBUCK1] = 0xB;
I'd almost prefer seeing BIT(MT6315_VBUCK1) | BIT(MT6315_VBUCK2) |
BIT(MT6315_VBUCK4)
(or maybe add a small comment above this line to explain that 1,2,4
are combined)
> + break;
> + case MT6315_GPU:
> + case MT6315_MD:
> + init_data->modeset_mask[MT6315_VBUCK1] = 0x3;
> + break;
> + default:
> + break;
> + }
Oh, I see, so you got rid of the device tree property
`mtk,combined-regulator` and instead match the USID (it would have
been great to document that clearly in your changelog).
I think this is ok as long as all MT6315 part numbers have a different
USID, but please see my comment below.
> +
> + return 0;
> +}
> +
> +static void mt6315_regulator_shutdown(struct spmi_device *pdev)
> +{
> + struct mt6315_chip *chip = dev_get_drvdata(&pdev->dev);
> + int ret = 0;
> +
> + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY_H, PROTECTION_KEY_H);
> + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY, PROTECTION_KEY);
> + ret |= regmap_update_bits(chip->regmap, MT6315_TOP2_ELR7, 1, 1);
> + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY, 0);
> + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY_H, 0);
> + if (ret < 0)
> + dev_notice(&pdev->dev, "[%#x] Failed to enable power off sequence. %d\n",
> + pdev->usid, ret);
> +}
> +
> +static struct spmi_driver mt6315_regulator_driver = {
> + .driver = {
> + .name = "mt6315-regulator",
> + .of_match_table = mt6315_of_match,
> + },
> + .probe = mt6315_regulator_probe,
> + .shutdown = mt6315_regulator_shutdown,
> +};
> +
> +module_spmi_driver(mt6315_regulator_driver);
> +
> +MODULE_AUTHOR("Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>");
> +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6315 PMIC");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/regulator/mt6315-regulator.h b/include/linux/regulator/mt6315-regulator.h
> new file mode 100644
> index 000000000000..38bf365de24d
> --- /dev/null
> +++ b/include/linux/regulator/mt6315-regulator.h
> @@ -0,0 +1,45 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2020 MediaTek Inc.
> + */
> +
> +#ifndef __LINUX_REGULATOR_MT6315_H
> +#define __LINUX_REGULATOR_MT6315_H
> +
> +#define MT6315_MD 3
> +#define MT6315_CPU 6
> +#define MT6315_GPU 7
MD/CPU/GPU is the application, can we use the part numbers instead?
And actually there seem to be 2 MT6315 that could be used for GPU: QP
or SP, so "GPU" could be confusing later on if you added support for
QP.
Does each 5 MT6315 use a unique USID? (PP, QP, RP, SP, TP?)
If so, can we use the following instead?
#define MT6315_XX 3 // The datasheet I have doesn't specify USID for
the part numbers, so I'm not clear if this is RP or TP.
#define MT6315_PP 6
#define MT6315_SP 7
> +
> +enum {
> + MT6315_VBUCK1 = 0,
> + MT6315_VBUCK2,
> + MT6315_VBUCK3,
> + MT6315_VBUCK4,
> + MT6315_VBUCK_MAX,
> +};
> +
> +/* Register */
> +#define MT6315_SWCID_H 0xC
> +#define MT6315_TOP2_ELR7 0x139
> +#define MT6315_TOP_TMA_KEY 0x39F
> +#define MT6315_TOP_TMA_KEY_H 0x3A0
> +#define MT6315_BUCK_TOP_CON0 0x1440
> +#define MT6315_BUCK_TOP_CON1 0x1443
> +#define MT6315_BUCK_TOP_ELR0 0x1449
> +#define MT6315_BUCK_TOP_ELR2 0x144B
> +#define MT6315_BUCK_TOP_ELR4 0x144D
> +#define MT6315_BUCK_TOP_ELR6 0x144F
> +#define MT6315_VBUCK1_DBG0 0x1499
> +#define MT6315_VBUCK1_DBG4 0x149D
> +#define MT6315_VBUCK2_DBG0 0x1519
> +#define MT6315_VBUCK2_DBG4 0x151D
> +#define MT6315_VBUCK3_DBG0 0x1599
> +#define MT6315_VBUCK3_DBG4 0x159D
> +#define MT6315_VBUCK4_DBG0 0x1619
> +#define MT6315_VBUCK4_DBG4 0x161D
> +#define MT6315_BUCK_TOP_4PHASE_ANA_CON42 0x16B1
> +
> +#define PROTECTION_KEY_H 0x9C
> +#define PROTECTION_KEY 0xEA
> +
> +#endif /* __LINUX_REGULATOR_MT6315_H */
> --
> 2.18.0
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3 3/3] arm64: dts: mt8192: add mt6315 regulator nodes
2020-12-23 12:13 ` [PATCH v3 3/3] arm64: dts: mt8192: add mt6315 regulator nodes Hsin-Hsiung Wang
@ 2020-12-27 8:44 ` kernel test robot
0 siblings, 0 replies; 8+ messages in thread
From: kernel test robot @ 2020-12-27 8:44 UTC (permalink / raw)
To: Hsin-Hsiung Wang, Liam Girdwood, Mark Brown, Rob Herring,
Matthias Brugger, drinkcat
Cc: devicetree, kbuild-all, linux-kernel, linux-mediatek,
Hsin-Hsiung Wang, linux-arm-kernel
[-- Attachment #1: Type: text/plain, Size: 1677 bytes --]
Hi Hsin-Hsiung,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on next-20201223]
[cannot apply to regulator/for-next robh/for-next v5.10 v5.10-rc7 v5.10-rc6 v5.10]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Hsin-Hsiung-Wang/Add-support-for-MT6315-regulator/20201223-201653
base: d7a03a44a5e93f39ece70ec75d25c6088caa0fdb
config: arm64-allyesconfig (attached as .config)
compiler: aarch64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/5e171b2d898f267bc47e50be27f9e405a2cb173f
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Hsin-Hsiung-Wang/Add-support-for-MT6315-regulator/20201223-201653
git checkout 5e171b2d898f267bc47e50be27f9e405a2cb173f
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm64
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> Error: arch/arm64/boot/dts/mediatek/mt8192-evb.dts:27.1-6 Label or path spmi not found
FATAL ERROR: Syntax error parsing input tree
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 76549 bytes --]
[-- Attachment #3: Type: text/plain, Size: 170 bytes --]
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3 1/3] dt-bindings: regulator: document binding for MT6315 regulator
2020-12-23 12:13 ` [PATCH v3 1/3] dt-bindings: regulator: document binding " Hsin-Hsiung Wang
2020-12-23 17:47 ` Rob Herring
@ 2020-12-31 15:44 ` Rob Herring
1 sibling, 0 replies; 8+ messages in thread
From: Rob Herring @ 2020-12-31 15:44 UTC (permalink / raw)
To: Hsin-Hsiung Wang
Cc: devicetree, drinkcat, srv_heupstream, Liam Girdwood,
linux-kernel, Project_Global_Chrome_Upstream_Group, Mark Brown,
linux-mediatek, Matthias Brugger, linux-arm-kernel
On Wed, Dec 23, 2020 at 08:13:42PM +0800, Hsin-Hsiung Wang wrote:
> Add device tree binding information for MT6315 regulator driver.
> Example bindings for MT6315 are added.
>
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> ---
> .../bindings/regulator/mt6315-regulator.yaml | 71 +++++++++++++++++++
> 1 file changed, 71 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
>
> diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
> new file mode 100644
> index 000000000000..15ce83a36174
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
> @@ -0,0 +1,71 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/mtk,mt6315-regulator.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT6315 Regulator
> +
> +maintainers:
> + - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> +
> +description: |
> + The MT6315 is a power management IC (PMIC) configurable with SPMI.
> + that contains 4 BUCKs output which can combine with each other
> + by different efuse settings.
> +
> +properties:
> + compatible:
> + const: mediatek,mt6315-regulator
> +
> + reg:
> + maxItems: 1
> +
> + regulators:
> + type: object
> + description: List of regulators and its properties
> +
> + patternProperties:
> + "^vbuck[1-4]$":
> + type: object
> + $ref: "regulator.yaml#"
> +
> + properties:
> + regulator-name:
> + pattern: "^vbuck[1-4]$"
> + description:
> + should be "vbuck1", ..., "vbuck4"
The description just repeats what the schema defines. Drop it.
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - regulators
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + pmic@6 {
> + compatible = "mediatek,mt6315-regulator";
> + reg = <0x6 0 0xb 1>;
> +
> + regulators {
> + vbuck1 {
> + regulator-compatible = "vbuck1";
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1193750>;
> + regulator-enable-ramp-delay = <256>;
> + regulator-allowed-modes = <0 1 2 4>;
> + };
> +
> + vbuck3 {
> + regulator-compatible = "vbuck3";
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1193750>;
> + regulator-enable-ramp-delay = <256>;
> + regulator-allowed-modes = <0 1 2 4>;
> + };
> + };
> + };
> --
> 2.18.0
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-12-31 15:44 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-23 12:13 [PATCH v3 0/3] Add support for MT6315 regulator Hsin-Hsiung Wang
2020-12-23 12:13 ` [PATCH v3 1/3] dt-bindings: regulator: document binding " Hsin-Hsiung Wang
2020-12-23 17:47 ` Rob Herring
2020-12-31 15:44 ` Rob Herring
2020-12-23 12:13 ` [PATCH v3 2/3] regulator: mt6315: Add support " Hsin-Hsiung Wang
2020-12-24 0:38 ` Nicolas Boichat
2020-12-23 12:13 ` [PATCH v3 3/3] arm64: dts: mt8192: add mt6315 regulator nodes Hsin-Hsiung Wang
2020-12-27 8:44 ` kernel test robot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).