linux-mediatek.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH AUTOSEL 4.19 278/671] rtc: mt6397: Don't call irq_dispose_mapping.
       [not found] <20200116170509.12787-1-sashal@kernel.org>
@ 2020-01-16 16:58 ` Sasha Levin
  2020-01-16 17:02 ` [PATCH AUTOSEL 4.19 510/671] iommu/mediatek: Fix iova_to_phys PA start for 4GB mode Sasha Levin
  2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 611/671] mt7601u: fix bbp version check in mt7601u_wait_bbp_ready Sasha Levin
  2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2020-01-16 16:58 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-rtc, Alexandre Belloni, linux-mediatek,
	Pi-Hsun Shih, linux-arm-kernel

From: Pi-Hsun Shih <pihsun@chromium.org>

[ Upstream commit 24db953e942bd7a983e97892bdaddf69d00b1199 ]

The IRQ mapping was changed to not being created in the rtc-mt6397
driver, so the irq_dispose_mapping is no longer needed.
Also the dev_id passed to free_irq should be the same as the last
argument passed to request_threaded_irq.
This prevents a "Trying to free already-free IRQ 274" warning when
unbinding the driver.

Fixes: e695d3a0b3b3 ("mfd: mt6397: Create irq mappings in mfd core driver")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-mt6397.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index e9a25ec4d434..c06cf5202e02 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -343,7 +343,7 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
 			rtc->irq, ret);
-		goto out_dispose_irq;
+		return ret;
 	}
 
 	device_init_wakeup(&pdev->dev, 1);
@@ -359,9 +359,7 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 	return 0;
 
 out_free_irq:
-	free_irq(rtc->irq, rtc->rtc_dev);
-out_dispose_irq:
-	irq_dispose_mapping(rtc->irq);
+	free_irq(rtc->irq, rtc);
 	return ret;
 }
 
@@ -369,8 +367,7 @@ static int mtk_rtc_remove(struct platform_device *pdev)
 {
 	struct mt6397_rtc *rtc = platform_get_drvdata(pdev);
 
-	free_irq(rtc->irq, rtc->rtc_dev);
-	irq_dispose_mapping(rtc->irq);
+	free_irq(rtc->irq, rtc);
 
 	return 0;
 }
-- 
2.20.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH AUTOSEL 4.19 510/671] iommu/mediatek: Fix iova_to_phys PA start for 4GB mode
       [not found] <20200116170509.12787-1-sashal@kernel.org>
  2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 278/671] rtc: mt6397: Don't call irq_dispose_mapping Sasha Levin
@ 2020-01-16 17:02 ` Sasha Levin
  2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 611/671] mt7601u: fix bbp version check in mt7601u_wait_bbp_ready Sasha Levin
  2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2020-01-16 17:02 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Joerg Roedel, iommu, linux-mediatek, Yong Wu,
	linux-arm-kernel

From: Yong Wu <yong.wu@mediatek.com>

[ Upstream commit 76ce65464fcd2c21db84391572b7938b716aceb0 ]

In M4U 4GB mode, the physical address is remapped as below:

CPU Physical address:

====================

0      1G       2G     3G       4G     5G
|---A---|---B---|---C---|---D---|---E---|
+--I/O--+------------Memory-------------+

IOMMU output physical address:
 =============================

                                4G      5G     6G      7G      8G
                                |---E---|---B---|---C---|---D---|
                                +------------Memory-------------+

The Region 'A'(I/O) can not be mapped by M4U; For Region 'B'/'C'/'D', the
bit32 of the CPU physical address always is needed to set, and for Region
'E', the CPU physical address keep as is. something looks like this:
CPU PA         ->    M4U OUTPUT PA
0x4000_0000          0x1_4000_0000 (Add bit32)
0x8000_0000          0x1_8000_0000 ...
0xc000_0000          0x1_c000_0000 ...
0x1_0000_0000        0x1_0000_0000 (No change)

Additionally, the iommu consumers always use the CPU phyiscal address.

The PA in the iova_to_phys that is got from v7s always is u32, But
from the CPU point of view, PA only need add BIT(32) when PA < 0x4000_0000.

Fixes: 30e2fccf9512 ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/mtk_iommu.c | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index f9f69f7111a9..c88cc299e3c9 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -115,6 +115,30 @@ struct mtk_iommu_domain {
 
 static struct iommu_ops mtk_iommu_ops;
 
+/*
+ * In M4U 4GB mode, the physical address is remapped as below:
+ *
+ * CPU Physical address:
+ * ====================
+ *
+ * 0      1G       2G     3G       4G     5G
+ * |---A---|---B---|---C---|---D---|---E---|
+ * +--I/O--+------------Memory-------------+
+ *
+ * IOMMU output physical address:
+ *  =============================
+ *
+ *                                 4G      5G     6G      7G      8G
+ *                                 |---E---|---B---|---C---|---D---|
+ *                                 +------------Memory-------------+
+ *
+ * The Region 'A'(I/O) can NOT be mapped by M4U; For Region 'B'/'C'/'D', the
+ * bit32 of the CPU physical address always is needed to set, and for Region
+ * 'E', the CPU physical address keep as is.
+ * Additionally, The iommu consumers always use the CPU phyiscal address.
+ */
+#define MTK_IOMMU_4GB_MODE_REMAP_BASE	 0x40000000
+
 static LIST_HEAD(m4ulist);	/* List all the M4U HWs */
 
 #define for_each_m4u(data)	list_for_each_entry(data, &m4ulist, list)
@@ -409,7 +433,7 @@ static phys_addr_t mtk_iommu_iova_to_phys(struct iommu_domain *domain,
 	pa = dom->iop->iova_to_phys(dom->iop, iova);
 	spin_unlock_irqrestore(&dom->pgtlock, flags);
 
-	if (data->enable_4GB)
+	if (data->enable_4GB && pa < MTK_IOMMU_4GB_MODE_REMAP_BASE)
 		pa |= BIT_ULL(32);
 
 	return pa;
-- 
2.20.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH AUTOSEL 4.19 611/671] mt7601u: fix bbp version check in mt7601u_wait_bbp_ready
       [not found] <20200116170509.12787-1-sashal@kernel.org>
  2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 278/671] rtc: mt6397: Don't call irq_dispose_mapping Sasha Levin
  2020-01-16 17:02 ` [PATCH AUTOSEL 4.19 510/671] iommu/mediatek: Fix iova_to_phys PA start for 4GB mode Sasha Levin
@ 2020-01-16 17:04 ` Sasha Levin
  2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2020-01-16 17:04 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Jakub Kicinski, netdev, linux-wireless,
	linux-mediatek, linux-arm-kernel, Lorenzo Bianconi, Kalle Valo

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 15e14f76f85f4f0eab3b8146e1cd3c58ce272823 ]

Fix bbp ready check in mt7601u_wait_bbp_ready. The issue is reported by
coverity with the following error:

Logical vs. bitwise operator
The expression's value does not depend on the operands; inadvertent use
of the wrong operator is a likely logic error.

Addresses-Coverity-ID: 1309441 ("Logical vs. bitwise operator")
Fixes: c869f77d6abb ("add mt7601u driver")
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt7601u/phy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt7601u/phy.c b/drivers/net/wireless/mediatek/mt7601u/phy.c
index b804abd464ae..539f78149e43 100644
--- a/drivers/net/wireless/mediatek/mt7601u/phy.c
+++ b/drivers/net/wireless/mediatek/mt7601u/phy.c
@@ -221,7 +221,7 @@ int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev)
 
 	do {
 		val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION);
-		if (val && ~val)
+		if (val && val != 0xff)
 			break;
 	} while (--i);
 
-- 
2.20.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2020-01-16 17:43 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20200116170509.12787-1-sashal@kernel.org>
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 278/671] rtc: mt6397: Don't call irq_dispose_mapping Sasha Levin
2020-01-16 17:02 ` [PATCH AUTOSEL 4.19 510/671] iommu/mediatek: Fix iova_to_phys PA start for 4GB mode Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 611/671] mt7601u: fix bbp version check in mt7601u_wait_bbp_ready Sasha Levin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).