[PATCH AUTOSEL 5.6 060/149] mt76: mt7615: disable 5 GHz on MT7622

[PATCH AUTOSEL 5.6 060/149] mt76: mt7615: disable 5 GHz on MT7622

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit c3ad5e9d00af19c53dec1d8ae647a78ac377b593 ]

It is not supported by the chip, so avoid issues with potentially wrong
EEPROM configurations.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c
index 17e277bf39e0f..cb05a07135a03 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c
@@ -111,6 +111,9 @@ static void mt7615_eeprom_parse_hw_cap(struct mt7615_dev *dev)
 		break;
 	}
 
+	if (is_mt7622(&dev->mt76))
+		dev->mt76.cap.has_5ghz = false;
+
 	/* read tx-rx mask from eeprom */
 	val = mt76_rr(dev, MT_TOP_STRAP_STA);
 	max_nss = val & MT_TOP_3NSS ? 3 : 4;
-- 
2.20.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.6 061/149] mt76: fix handling full tx queues in mt76_dma_tx_queue_skb_raw

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 93eaec7625f13cffb593b471405b017c7e64d4ee ]

Fixes a theoretical issue where it could potentially overwrite an existing
descriptor entry (and leaking its skb)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/dma.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c
index 1847f55e199b0..c001d94958d83 100644
--- a/drivers/net/wireless/mediatek/mt76/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/dma.c
@@ -261,10 +261,13 @@ mt76_dma_tx_queue_skb_raw(struct mt76_dev *dev, enum mt76_txq_id qid,
 	struct mt76_queue_buf buf;
 	dma_addr_t addr;
 
+	if (q->queued + 1 >= q->ndesc - 1)
+		goto error;
+
 	addr = dma_map_single(dev->dev, skb->data, skb->len,
 			      DMA_TO_DEVICE);
 	if (unlikely(dma_mapping_error(dev->dev, addr)))
-		return -ENOMEM;
+		goto error;
 
 	buf.addr = addr;
 	buf.len = skb->len;
@@ -275,6 +278,10 @@ mt76_dma_tx_queue_skb_raw(struct mt76_dev *dev, enum mt76_txq_id qid,
 	spin_unlock_bh(&q->lock);
 
 	return 0;
+
+error:
+	dev_kfree_skb(skb);
+	return -ENOMEM;
 }
 
 static int
-- 
2.20.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.6 081/149] ASoC: mediatek: mt8183-da7219: pull TDM GPIO pins down when probed

[Sasha Levin]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit 8726ee6148fe24e2b29d4a961ad95c4ff8025d1d ]

1. Switch TDM GPIO pins according to playback on or off.
2. Pull TDM GPIO pins down when probed to avoid current leakage.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200213112003.2.I1d568b0c99742c6e755d051aadfd52e4be3cc0a5@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../mediatek/mt8183/mt8183-da7219-max98357.c  | 104 +++++++++++++++++-
 1 file changed, 98 insertions(+), 6 deletions(-)

diff --git a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
index c65493721e90d..a3974b0a90157 100644
--- a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
@@ -18,6 +18,22 @@
 
 static struct snd_soc_jack headset_jack;
 
+enum PINCTRL_PIN_STATE {
+	PIN_STATE_DEFAULT = 0,
+	PIN_TDM_OUT_ON,
+	PIN_TDM_OUT_OFF,
+	PIN_STATE_MAX
+};
+
+static const char * const mt8183_pin_str[PIN_STATE_MAX] = {
+	"default", "aud_tdm_out_on", "aud_tdm_out_off",
+};
+
+struct mt8183_da7219_max98357_priv {
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pin_states[PIN_STATE_MAX];
+};
+
 static int mt8183_mt6358_i2s_hw_params(struct snd_pcm_substream *substream,
 				       struct snd_pcm_hw_params *params)
 {
@@ -204,6 +220,47 @@ SND_SOC_DAILINK_DEFS(tdm,
 	DAILINK_COMP_ARRAY(COMP_DUMMY()),
 	DAILINK_COMP_ARRAY(COMP_EMPTY()));
 
+static int mt8183_da7219_tdm_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct mt8183_da7219_max98357_priv *priv =
+		snd_soc_card_get_drvdata(rtd->card);
+	int ret;
+
+	if (IS_ERR(priv->pin_states[PIN_TDM_OUT_ON]))
+		return PTR_ERR(priv->pin_states[PIN_TDM_OUT_ON]);
+
+	ret = pinctrl_select_state(priv->pinctrl,
+				   priv->pin_states[PIN_TDM_OUT_ON]);
+	if (ret)
+		dev_err(rtd->card->dev, "%s failed to select state %d\n",
+			__func__, ret);
+
+	return ret;
+}
+
+static void mt8183_da7219_tdm_shutdown(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct mt8183_da7219_max98357_priv *priv =
+		snd_soc_card_get_drvdata(rtd->card);
+	int ret;
+
+	if (IS_ERR(priv->pin_states[PIN_TDM_OUT_OFF]))
+		return;
+
+	ret = pinctrl_select_state(priv->pinctrl,
+				   priv->pin_states[PIN_TDM_OUT_OFF]);
+	if (ret)
+		dev_err(rtd->card->dev, "%s failed to select state %d\n",
+			__func__, ret);
+}
+
+static struct snd_soc_ops mt8183_da7219_tdm_ops = {
+	.startup = mt8183_da7219_tdm_startup,
+	.shutdown = mt8183_da7219_tdm_shutdown,
+};
+
 static struct snd_soc_dai_link mt8183_da7219_max98357_dai_links[] = {
 	/* FE */
 	{
@@ -353,6 +410,8 @@ static struct snd_soc_dai_link mt8183_da7219_max98357_dai_links[] = {
 		.no_pcm = 1,
 		.dpcm_playback = 1,
 		.ignore_suspend = 1,
+		.be_hw_params_fixup = mt8183_i2s_hw_params_fixup,
+		.ops = &mt8183_da7219_tdm_ops,
 		SND_SOC_DAILINK_REG(tdm),
 	},
 };
@@ -409,7 +468,7 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev)
 	struct snd_soc_card *card = &mt8183_da7219_max98357_card;
 	struct device_node *platform_node;
 	struct snd_soc_dai_link *dai_link;
-	struct pinctrl *default_pins;
+	struct mt8183_da7219_max98357_priv *priv;
 	int ret, i;
 
 	card->dev = &pdev->dev;
@@ -443,12 +502,45 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	default_pins =
-		devm_pinctrl_get_select(&pdev->dev, PINCTRL_STATE_DEFAULT);
-	if (IS_ERR(default_pins)) {
-		dev_err(&pdev->dev, "%s set pins failed\n",
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	snd_soc_card_set_drvdata(card, priv);
+
+	priv->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (IS_ERR(priv->pinctrl)) {
+		dev_err(&pdev->dev, "%s devm_pinctrl_get failed\n",
 			__func__);
-		return PTR_ERR(default_pins);
+		return PTR_ERR(priv->pinctrl);
+	}
+
+	for (i = 0; i < PIN_STATE_MAX; i++) {
+		priv->pin_states[i] = pinctrl_lookup_state(priv->pinctrl,
+							   mt8183_pin_str[i]);
+		if (IS_ERR(priv->pin_states[i])) {
+			ret = PTR_ERR(priv->pin_states[i]);
+			dev_info(&pdev->dev, "%s Can't find pin state %s %d\n",
+				 __func__, mt8183_pin_str[i], ret);
+		}
+	}
+
+	if (!IS_ERR(priv->pin_states[PIN_TDM_OUT_OFF])) {
+		ret = pinctrl_select_state(priv->pinctrl,
+					   priv->pin_states[PIN_TDM_OUT_OFF]);
+		if (ret)
+			dev_info(&pdev->dev,
+				 "%s failed to select state %d\n",
+				 __func__, ret);
+	}
+
+	if (!IS_ERR(priv->pin_states[PIN_STATE_DEFAULT])) {
+		ret = pinctrl_select_state(priv->pinctrl,
+					   priv->pin_states[PIN_STATE_DEFAULT]);
+		if (ret)
+			dev_info(&pdev->dev,
+				 "%s failed to select state %d\n",
+				 __func__, ret);
 	}
 
 	return ret;
-- 
2.20.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.6 084/149] mt76: mt7603: fix input validation issues for powersave-filtered frames

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit d55aa5e17461b8b423adae376978032c4a10a1d8 ]

Before extracting the tid out of the packet, check if it was qos-data.
Only accept tid values 0-7
Also, avoid accepting the hardware queue as skb queue mapping, it could
lead to an overrun. Instead, derive the hardware queue from the tid number,
in order to avoid issues with packets being filtered multiple times.
This also fixes a mismatch between hardware and software queue indexes.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7603/dma.c   | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/dma.c b/drivers/net/wireless/mediatek/mt76/mt7603/dma.c
index a6ab73060aada..57428467fe967 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/dma.c
@@ -30,6 +30,16 @@ mt7603_init_tx_queue(struct mt7603_dev *dev, struct mt76_sw_queue *q,
 static void
 mt7603_rx_loopback_skb(struct mt7603_dev *dev, struct sk_buff *skb)
 {
+	static const u8 tid_to_ac[8] = {
+		IEEE80211_AC_BE,
+		IEEE80211_AC_BK,
+		IEEE80211_AC_BK,
+		IEEE80211_AC_BE,
+		IEEE80211_AC_VI,
+		IEEE80211_AC_VI,
+		IEEE80211_AC_VO,
+		IEEE80211_AC_VO
+	};
 	__le32 *txd = (__le32 *)skb->data;
 	struct ieee80211_hdr *hdr;
 	struct ieee80211_sta *sta;
@@ -38,7 +48,7 @@ mt7603_rx_loopback_skb(struct mt7603_dev *dev, struct sk_buff *skb)
 	void *priv;
 	int idx;
 	u32 val;
-	u8 tid;
+	u8 tid = 0;
 
 	if (skb->len < MT_TXD_SIZE + sizeof(struct ieee80211_hdr))
 		goto free;
@@ -56,15 +66,16 @@ mt7603_rx_loopback_skb(struct mt7603_dev *dev, struct sk_buff *skb)
 
 	priv = msta = container_of(wcid, struct mt7603_sta, wcid);
 	val = le32_to_cpu(txd[0]);
-	skb_set_queue_mapping(skb, FIELD_GET(MT_TXD0_Q_IDX, val));
-
 	val &= ~(MT_TXD0_P_IDX | MT_TXD0_Q_IDX);
 	val |= FIELD_PREP(MT_TXD0_Q_IDX, MT_TX_HW_QUEUE_MGMT);
 	txd[0] = cpu_to_le32(val);
 
 	sta = container_of(priv, struct ieee80211_sta, drv_priv);
 	hdr = (struct ieee80211_hdr *)&skb->data[MT_TXD_SIZE];
-	tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
+	if (ieee80211_is_data_qos(hdr->frame_control))
+		tid = *ieee80211_get_qos_ctl(hdr) &
+		      IEEE80211_QOS_CTL_TAG1D_MASK;
+	skb_set_queue_mapping(skb, tid_to_ac[tid]);
 	ieee80211_sta_set_buffered(sta, tid, true);
 
 	spin_lock_bh(&dev->ps_lock);
-- 
2.20.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.6 129/149] scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic

[Sasha Levin]

From: Can Guo <cang@codeaurora.org>

[ Upstream commit c63d6099a7959ecc919b2549dc6b71f53521f819 ]

The async version of ufshcd_hold(async == true), which is only called in
queuecommand path as for now, is expected to work in atomic context, thus
it should not sleep or schedule out. When it runs into the condition that
clocks are ON but link is still in hibern8 state, it should bail out
without flushing the clock ungate work.

Fixes: f2a785ac2312 ("scsi: ufshcd: Fix race between clk scaling and ungate work")
Link: https://lore.kernel.org/r/1581392451-28743-6-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 2d705694636c2..682f85f800d0f 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1518,6 +1518,11 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 		 */
 		if (ufshcd_can_hibern8_during_gating(hba) &&
 		    ufshcd_is_link_hibern8(hba)) {
+			if (async) {
+				rc = -EAGAIN;
+				hba->clk_gating.active_reqs--;
+				break;
+			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
 			flush_work(&hba->clk_gating.ungate_work);
 			spin_lock_irqsave(hba->host->host_lock, flags);
-- 
2.20.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.6 131/149] scsi: ufs: ufs-mediatek: ensure UniPro is not powered down before linkup

[Sasha Levin]

From: Stanley Chu <stanley.chu@mediatek.com>

[ Upstream commit 7742ca797aa79f280853ffd3e7d2e2af3cd317a5 ]

MediaTek Chipsets can enter proprietary UniPro low-power mode during
suspend while link is in hibern8 state. Make sure leaving low-power mode
before every link startup to prevent lockup in any possible error recovery
path.

At the same time, re-factor related funcitons to improve code readability.

Link: https://lore.kernel.org/r/20200129105251.12466-2-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufs-mediatek.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 53eae5fe2ade2..7ac838cc15d16 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -30,6 +30,11 @@
 #define ufs_mtk_device_reset_ctrl(high, res) \
 	ufs_mtk_smc(UFS_MTK_SIP_DEVICE_RESET, high, res)
 
+#define ufs_mtk_unipro_powerdown(hba, powerdown) \
+	ufshcd_dme_set(hba, \
+		       UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0), \
+		       powerdown)
+
 static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable)
 {
 	u32 tmp;
@@ -290,6 +295,8 @@ static int ufs_mtk_pre_link(struct ufs_hba *hba)
 	int ret;
 	u32 tmp;
 
+	ufs_mtk_unipro_powerdown(hba, 0);
+
 	/* disable deep stall */
 	ret = ufshcd_dme_get(hba, UIC_ARG_MIB(VS_SAVEPOWERCONTROL), &tmp);
 	if (ret)
@@ -390,9 +397,7 @@ static int ufs_mtk_link_set_hpm(struct ufs_hba *hba)
 	if (err)
 		return err;
 
-	err = ufshcd_dme_set(hba,
-			     UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0),
-			     0);
+	err = ufs_mtk_unipro_powerdown(hba, 0);
 	if (err)
 		return err;
 
@@ -413,14 +418,10 @@ static int ufs_mtk_link_set_lpm(struct ufs_hba *hba)
 {
 	int err;
 
-	err = ufshcd_dme_set(hba,
-			     UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0),
-			     1);
+	err = ufs_mtk_unipro_powerdown(hba, 1);
 	if (err) {
 		/* Resume UniPro state for following error recovery */
-		ufshcd_dme_set(hba,
-			       UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0),
-			       0);
+		ufs_mtk_unipro_powerdown(hba, 0);
 		return err;
 	}
 
-- 
2.20.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek