[PATCH AUTOSEL 5.4 055/175] Bluetooth: btmtkuart: Improve exception handling in btmtuart_probe()

[PATCH AUTOSEL 5.4 055/175] Bluetooth: btmtkuart: Improve exception handling in btmtuart_probe()

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit 4803c54ca24923a30664bea2a7772db6e7303c51 ]

Calls of the functions clk_disable_unprepare() and hci_free_dev()
were missing for the exception handling.
Thus add the missed function calls together with corresponding
jump targets.

Fixes: 055825614c6b ("Bluetooth: btmtkuart: add an implementation for clock osc property")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btmtkuart.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/bluetooth/btmtkuart.c b/drivers/bluetooth/btmtkuart.c
index e11169ad8247..8a81fbca5c9d 100644
--- a/drivers/bluetooth/btmtkuart.c
+++ b/drivers/bluetooth/btmtkuart.c
@@ -1015,7 +1015,7 @@ static int btmtkuart_probe(struct serdev_device *serdev)
 	if (btmtkuart_is_standalone(bdev)) {
 		err = clk_prepare_enable(bdev->osc);
 		if (err < 0)
-			return err;
+			goto err_hci_free_dev;
 
 		if (bdev->boot) {
 			gpiod_set_value_cansleep(bdev->boot, 1);
@@ -1028,10 +1028,8 @@ static int btmtkuart_probe(struct serdev_device *serdev)
 
 		/* Power on */
 		err = regulator_enable(bdev->vcc);
-		if (err < 0) {
-			clk_disable_unprepare(bdev->osc);
-			return err;
-		}
+		if (err < 0)
+			goto err_clk_disable_unprepare;
 
 		/* Reset if the reset-gpios is available otherwise the board
 		 * -level design should be guaranteed.
@@ -1063,7 +1061,6 @@ static int btmtkuart_probe(struct serdev_device *serdev)
 	err = hci_register_dev(hdev);
 	if (err < 0) {
 		dev_err(&serdev->dev, "Can't register HCI device\n");
-		hci_free_dev(hdev);
 		goto err_regulator_disable;
 	}
 
@@ -1072,6 +1069,11 @@ static int btmtkuart_probe(struct serdev_device *serdev)
 err_regulator_disable:
 	if (btmtkuart_is_standalone(bdev))
 		regulator_disable(bdev->vcc);
+err_clk_disable_unprepare:
+	if (btmtkuart_is_standalone(bdev))
+		clk_disable_unprepare(bdev->osc);
+err_hci_free_dev:
+	hci_free_dev(hdev);
 
 	return err;
 }
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.4 071/175] dt-bindings: display: mediatek: control dpi pins mode to avoid leakage

[Sasha Levin]

From: Jitao Shi <jitao.shi@mediatek.com>

[ Upstream commit b0ff9b590733079f7f9453e5976a9dd2630949e3 ]

Add property "pinctrl-names" to swap pin mode between gpio and dpi mode.
Set the dpi pins to gpio mode and output-low to avoid leakage current
when dpi disabled.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/display/mediatek/mediatek,dpi.txt   | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
index b6a7e7397b8b..b944fe067188 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -16,6 +16,9 @@ Required properties:
   Documentation/devicetree/bindings/graph.txt. This port should be connected
   to the input port of an attached HDMI or LVDS encoder chip.
 
+Optional properties:
+- pinctrl-names: Contain "default" and "sleep".
+
 Example:
 
 dpi0: dpi@1401d000 {
@@ -26,6 +29,9 @@ dpi0: dpi@1401d000 {
 		 <&mmsys CLK_MM_DPI_ENGINE>,
 		 <&apmixedsys CLK_APMIXED_TVDPLL>;
 	clock-names = "pixel", "engine", "pll";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_pin_func>;
+	pinctrl-1 = <&dpi_pin_idle>;
 
 	port {
 		dpi0_out: endpoint {
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.4 072/175] drm/mediatek: set dpi pin mode to gpio low to avoid leakage current

[Sasha Levin]

From: Jitao Shi <jitao.shi@mediatek.com>

[ Upstream commit 6bd4763fd532cff43f9b15704f324c45a9806f53 ]

Config dpi pins mode to output and pull low when dpi is disabled.
Aovid leakage current from some dpi pins (Hsync Vsync DE ... ).

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 31 ++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index be6d95c5ff25..48de07e9059e 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -10,7 +10,9 @@
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_gpio.h>
 #include <linux/of_graph.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
 
@@ -73,6 +75,9 @@ struct mtk_dpi {
 	enum mtk_dpi_out_yc_map yc_map;
 	enum mtk_dpi_out_bit_num bit_num;
 	enum mtk_dpi_out_channel_swap channel_swap;
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pins_gpio;
+	struct pinctrl_state *pins_dpi;
 	int refcount;
 };
 
@@ -378,6 +383,9 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi)
 	if (--dpi->refcount != 0)
 		return;
 
+	if (dpi->pinctrl && dpi->pins_gpio)
+		pinctrl_select_state(dpi->pinctrl, dpi->pins_gpio);
+
 	mtk_dpi_disable(dpi);
 	clk_disable_unprepare(dpi->pixel_clk);
 	clk_disable_unprepare(dpi->engine_clk);
@@ -402,6 +410,9 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
 		goto err_pixel;
 	}
 
+	if (dpi->pinctrl && dpi->pins_dpi)
+		pinctrl_select_state(dpi->pinctrl, dpi->pins_dpi);
+
 	mtk_dpi_enable(dpi);
 	return 0;
 
@@ -689,6 +700,26 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 	dpi->dev = dev;
 	dpi->conf = (struct mtk_dpi_conf *)of_device_get_match_data(dev);
 
+	dpi->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (IS_ERR(dpi->pinctrl)) {
+		dpi->pinctrl = NULL;
+		dev_dbg(&pdev->dev, "Cannot find pinctrl!\n");
+	}
+	if (dpi->pinctrl) {
+		dpi->pins_gpio = pinctrl_lookup_state(dpi->pinctrl, "sleep");
+		if (IS_ERR(dpi->pins_gpio)) {
+			dpi->pins_gpio = NULL;
+			dev_dbg(&pdev->dev, "Cannot find pinctrl idle!\n");
+		}
+		if (dpi->pins_gpio)
+			pinctrl_select_state(dpi->pinctrl, dpi->pins_gpio);
+
+		dpi->pins_dpi = pinctrl_lookup_state(dpi->pinctrl, "default");
+		if (IS_ERR(dpi->pins_dpi)) {
+			dpi->pins_dpi = NULL;
+			dev_dbg(&pdev->dev, "Cannot find pinctrl active!\n");
+		}
+	}
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dpi->regs = devm_ioremap_resource(dev, mem);
 	if (IS_ERR(dpi->regs)) {
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.4 120/175] mt76: avoid rx reorder buffer overflow

[Sasha Levin]

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit 7c4f744d6703757be959f521a7a441bf34745d99 ]

Enlarge slot to support 11ax 256 BA (256 MPDUs in an AMPDU)

Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/agg-rx.c | 8 ++++----
 drivers/net/wireless/mediatek/mt76/mt76.h   | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/agg-rx.c b/drivers/net/wireless/mediatek/mt76/agg-rx.c
index 8f3d36a15e17..cbff0dfc9631 100644
--- a/drivers/net/wireless/mediatek/mt76/agg-rx.c
+++ b/drivers/net/wireless/mediatek/mt76/agg-rx.c
@@ -143,8 +143,8 @@ void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames)
 	struct ieee80211_sta *sta;
 	struct mt76_rx_tid *tid;
 	bool sn_less;
-	u16 seqno, head, size;
-	u8 ackp, idx;
+	u16 seqno, head, size, idx;
+	u8 ackp;
 
 	__skb_queue_tail(frames, skb);
 
@@ -230,7 +230,7 @@ void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames)
 }
 
 int mt76_rx_aggr_start(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tidno,
-		       u16 ssn, u8 size)
+		       u16 ssn, u16 size)
 {
 	struct mt76_rx_tid *tid;
 
@@ -254,7 +254,7 @@ EXPORT_SYMBOL_GPL(mt76_rx_aggr_start);
 
 static void mt76_rx_aggr_shutdown(struct mt76_dev *dev, struct mt76_rx_tid *tid)
 {
-	u8 size = tid->size;
+	u16 size = tid->size;
 	int i;
 
 	cancel_delayed_work(&tid->reorder_work);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 502814c26b33..52a16b42dfd7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -240,8 +240,8 @@ struct mt76_rx_tid {
 	struct delayed_work reorder_work;
 
 	u16 head;
-	u8 size;
-	u8 nframes;
+	u16 size;
+	u16 nframes;
 
 	u8 started:1, stopped:1, timer_pending:1;
 
@@ -723,7 +723,7 @@ int mt76_get_survey(struct ieee80211_hw *hw, int idx,
 void mt76_set_stream_caps(struct mt76_dev *dev, bool vht);
 
 int mt76_rx_aggr_start(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tid,
-		       u16 ssn, u8 size);
+		       u16 ssn, u16 size);
 void mt76_rx_aggr_stop(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tid);
 
 void mt76_wcid_key_setup(struct mt76_dev *dev, struct mt76_wcid *wcid,
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.4 123/175] net: dsa: mt7530: set CPU port to fallback mode

[Sasha Levin]

From: DENG Qingfang <dqfext@gmail.com>

[ Upstream commit 38152ea37d8bdaffa22603e0a5b5b86cfa8714c9 ]

Currently, setting a bridge's self PVID to other value and deleting
the default VID 1 renders untagged ports of that VLAN unable to talk to
the CPU port:

	bridge vlan add dev br0 vid 2 pvid untagged self
	bridge vlan del dev br0 vid 1 self
	bridge vlan add dev sw0p0 vid 2 pvid untagged
	bridge vlan del dev sw0p0 vid 1
	# br0 cannot send untagged frames out of sw0p0 anymore

That is because the CPU port is set to security mode and its PVID is
still 1, and untagged frames are dropped due to VLAN member violation.

Set the CPU port to fallback mode so untagged frames can pass through.

Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 11 ++++++++---
 drivers/net/dsa/mt7530.h |  6 ++++++
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 6027bb65f7f6..dc9a3bb24114 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -818,10 +818,15 @@ mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
 		   PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS));
 
 	/* Trapped into security mode allows packet forwarding through VLAN
-	 * table lookup.
+	 * table lookup. CPU port is set to fallback mode to let untagged
+	 * frames pass through.
 	 */
-	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
-		   MT7530_PORT_SECURITY_MODE);
+	if (dsa_is_cpu_port(ds, port))
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_FALLBACK_MODE);
+	else
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_SECURITY_MODE);
 
 	/* Set the port as a user port which is to be able to recognize VID
 	 * from incoming packets before fetching entry within the VLAN table.
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 0e7e36d8f994..3ef7b5a6fc22 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -148,6 +148,12 @@ enum mt7530_port_mode {
 	/* Port Matrix Mode: Frames are forwarded by the PCR_MATRIX members. */
 	MT7530_PORT_MATRIX_MODE = PORT_VLAN(0),
 
+	/* Fallback Mode: Forward received frames with ingress ports that do
+	 * not belong to the VLAN member. Frames whose VID is not listed on
+	 * the VLAN table are forwarded by the PCR_MATRIX members.
+	 */
+	MT7530_PORT_FALLBACK_MODE = PORT_VLAN(1),
+
 	/* Security Mode: Discard any frame due to ingress membership
 	 * violation or VID missed on the VLAN table.
 	 */
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek