[PATCH AUTOSEL 4.19 036/106] dt-bindings: display: mediatek: control dpi pins mode to avoid leakage

[PATCH AUTOSEL 4.19 036/106] dt-bindings: display: mediatek: control dpi pins mode to avoid leakage

[Sasha Levin]

From: Jitao Shi <jitao.shi@mediatek.com>

[ Upstream commit b0ff9b590733079f7f9453e5976a9dd2630949e3 ]

Add property "pinctrl-names" to swap pin mode between gpio and dpi mode.
Set the dpi pins to gpio mode and output-low to avoid leakage current
when dpi disabled.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/display/mediatek/mediatek,dpi.txt   | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
index b6a7e7397b8b..b944fe067188 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -16,6 +16,9 @@ Required properties:
   Documentation/devicetree/bindings/graph.txt. This port should be connected
   to the input port of an attached HDMI or LVDS encoder chip.
 
+Optional properties:
+- pinctrl-names: Contain "default" and "sleep".
+
 Example:
 
 dpi0: dpi@1401d000 {
@@ -26,6 +29,9 @@ dpi0: dpi@1401d000 {
 		 <&mmsys CLK_MM_DPI_ENGINE>,
 		 <&apmixedsys CLK_APMIXED_TVDPLL>;
 	clock-names = "pixel", "engine", "pll";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_pin_func>;
+	pinctrl-1 = <&dpi_pin_idle>;
 
 	port {
 		dpi0_out: endpoint {
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 4.19 071/106] mt76: avoid rx reorder buffer overflow

[Sasha Levin]

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit 7c4f744d6703757be959f521a7a441bf34745d99 ]

Enlarge slot to support 11ax 256 BA (256 MPDUs in an AMPDU)

Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/agg-rx.c | 8 ++++----
 drivers/net/wireless/mediatek/mt76/mt76.h   | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/agg-rx.c b/drivers/net/wireless/mediatek/mt76/agg-rx.c
index 73c8b2805c97..d44d57e6eb27 100644
--- a/drivers/net/wireless/mediatek/mt76/agg-rx.c
+++ b/drivers/net/wireless/mediatek/mt76/agg-rx.c
@@ -154,8 +154,8 @@ void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames)
 	struct ieee80211_sta *sta;
 	struct mt76_rx_tid *tid;
 	bool sn_less;
-	u16 seqno, head, size;
-	u8 ackp, idx;
+	u16 seqno, head, size, idx;
+	u8 ackp;
 
 	__skb_queue_tail(frames, skb);
 
@@ -240,7 +240,7 @@ void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames)
 }
 
 int mt76_rx_aggr_start(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tidno,
-		       u16 ssn, u8 size)
+		       u16 ssn, u16 size)
 {
 	struct mt76_rx_tid *tid;
 
@@ -264,7 +264,7 @@ EXPORT_SYMBOL_GPL(mt76_rx_aggr_start);
 
 static void mt76_rx_aggr_shutdown(struct mt76_dev *dev, struct mt76_rx_tid *tid)
 {
-	u8 size = tid->size;
+	u16 size = tid->size;
 	int i;
 
 	cancel_delayed_work(&tid->reorder_work);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 2eab35879163..7b1667ec619e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -193,8 +193,8 @@ struct mt76_rx_tid {
 	struct delayed_work reorder_work;
 
 	u16 head;
-	u8 size;
-	u8 nframes;
+	u16 size;
+	u16 nframes;
 
 	u8 started:1, stopped:1, timer_pending:1;
 
@@ -537,7 +537,7 @@ int mt76_get_survey(struct ieee80211_hw *hw, int idx,
 void mt76_set_stream_caps(struct mt76_dev *dev, bool vht);
 
 int mt76_rx_aggr_start(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tid,
-		       u16 ssn, u8 size);
+		       u16 ssn, u16 size);
 void mt76_rx_aggr_stop(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tid);
 
 void mt76_wcid_key_setup(struct mt76_dev *dev, struct mt76_wcid *wcid,
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 4.19 073/106] net: dsa: mt7530: set CPU port to fallback mode

[Sasha Levin]

From: DENG Qingfang <dqfext@gmail.com>

[ Upstream commit 38152ea37d8bdaffa22603e0a5b5b86cfa8714c9 ]

Currently, setting a bridge's self PVID to other value and deleting
the default VID 1 renders untagged ports of that VLAN unable to talk to
the CPU port:

	bridge vlan add dev br0 vid 2 pvid untagged self
	bridge vlan del dev br0 vid 1 self
	bridge vlan add dev sw0p0 vid 2 pvid untagged
	bridge vlan del dev sw0p0 vid 1
	# br0 cannot send untagged frames out of sw0p0 anymore

That is because the CPU port is set to security mode and its PVID is
still 1, and untagged frames are dropped due to VLAN member violation.

Set the CPU port to fallback mode so untagged frames can pass through.

Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 11 ++++++++---
 drivers/net/dsa/mt7530.h |  6 ++++++
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8b39a211ecb6..616afd81536a 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -860,10 +860,15 @@ mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
 		   PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS));
 
 	/* Trapped into security mode allows packet forwarding through VLAN
-	 * table lookup.
+	 * table lookup. CPU port is set to fallback mode to let untagged
+	 * frames pass through.
 	 */
-	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
-		   MT7530_PORT_SECURITY_MODE);
+	if (dsa_is_cpu_port(ds, port))
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_FALLBACK_MODE);
+	else
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_SECURITY_MODE);
 
 	/* Set the port as a user port which is to be able to recognize VID
 	 * from incoming packets before fetching entry within the VLAN table.
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 403adbe5a4b4..101d309ee445 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -148,6 +148,12 @@ enum mt7530_port_mode {
 	/* Port Matrix Mode: Frames are forwarded by the PCR_MATRIX members. */
 	MT7530_PORT_MATRIX_MODE = PORT_VLAN(0),
 
+	/* Fallback Mode: Forward received frames with ingress ports that do
+	 * not belong to the VLAN member. Frames whose VID is not listed on
+	 * the VLAN table are forwarded by the PCR_MATRIX members.
+	 */
+	MT7530_PORT_FALLBACK_MODE = PORT_VLAN(1),
+
 	/* Security Mode: Discard any frame due to ingress membership
 	 * violation or VID missed on the VLAN table.
 	 */
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek