* Re: [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name
2020-10-14 10:14 ` [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name Serge Semin
@ 2020-10-14 18:00 ` Florian Fainelli
2020-10-14 18:11 ` Serge Semin
2020-10-14 18:56 ` Paul Cercueil
` (3 subsequent siblings)
4 siblings, 1 reply; 11+ messages in thread
From: Florian Fainelli @ 2020-10-14 18:00 UTC (permalink / raw)
To: Serge Semin, Mathias Nyman, Felipe Balbi, Greg Kroah-Hartman,
Rob Herring, Alexey Brodkin, Vineet Gupta, Hauke Mehrtens,
Rafał Miłecki, bcm-kernel-feedback-list, Wei Xu,
Vladimir Zapolskiy, Maxime Coquelin, Alexandre Torgue,
Paul Cercueil, Thomas Bogendoerfer, Matthias Brugger,
Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras
Cc: devicetree, linux-snps-arc, linux-mips, Neil Armstrong,
Kevin Hilman, Yoshihiro Shimoda, linux-usb, linux-kernel,
Lad Prabhakar, Serge Semin, Bjorn Andersson, Manu Gautam,
Andy Gross, linux-mediatek, Pavel Parkhomenko, Alexey Malahov,
linuxppc-dev, linux-stm32, linux-arm-kernel, Roger Quadros
On 10/14/20 3:14 AM, Serge Semin wrote:
> In accordance with the Generic EHCI/OHCI bindings the corresponding node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Let's fix the DTS files, which have the nodes defined with
> incompatible names.
>
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
>
> ---
>
> Please, test the patch out to make sure it doesn't brake the dependent DTS
> files. I did only a manual grepping of the possible nodes dependencies.
Not sure how you envisioned these change to be picked up, but you may
need to split these changes between ARM/ARM64, MIPS and PowerPC at
least. And within ARM/ARM64 you will most likely have to split according
to the various SoC maintainers.
--
Florian
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name
2020-10-14 18:00 ` Florian Fainelli
@ 2020-10-14 18:11 ` Serge Semin
2020-10-14 18:41 ` Florian Fainelli
0 siblings, 1 reply; 11+ messages in thread
From: Serge Semin @ 2020-10-14 18:11 UTC (permalink / raw)
To: Florian Fainelli
Cc: Neil Armstrong, Benjamin Herrenschmidt, Bjorn Andersson,
Paul Cercueil, Paul Mackerras, Pavel Parkhomenko, linux-stm32,
Michael Ellerman, Rafał Miłecki, Alexey Brodkin,
Wei Xu, Andy Gross, bcm-kernel-feedback-list, Kevin Hilman,
linux-snps-arc, devicetree, Alexandre Torgue, Mathias Nyman,
Hauke Mehrtens, Lad Prabhakar, Vladimir Zapolskiy, Rob Herring,
linux-mediatek, Matthias Brugger, Alexey Malahov,
linux-arm-kernel, Roger Quadros, Felipe Balbi,
Thomas Bogendoerfer, Greg Kroah-Hartman, Yoshihiro Shimoda,
linux-usb, linux-mips, Serge Semin, linux-kernel, Manu Gautam,
Maxime Coquelin, Vineet Gupta, linuxppc-dev
On Wed, Oct 14, 2020 at 11:00:45AM -0700, Florian Fainelli wrote:
> On 10/14/20 3:14 AM, Serge Semin wrote:
> > In accordance with the Generic EHCI/OHCI bindings the corresponding node
> > name is suppose to comply with the Generic USB HCD DT schema, which
> > requires the USB nodes to have the name acceptable by the regexp:
> > "^usb(@.*)?" . Let's fix the DTS files, which have the nodes defined with
> > incompatible names.
> >
> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> >
> > ---
> >
> > Please, test the patch out to make sure it doesn't brake the dependent DTS
> > files. I did only a manual grepping of the possible nodes dependencies.
>
> Not sure how you envisioned these change to be picked up, but you may
> need to split these changes between ARM/ARM64, MIPS and PowerPC at
> least. And within ARM/ARM64 you will most likely have to split according
> to the various SoC maintainers.
Hmm, I don't really know how it's going to be done in this case, but there must
be a way to get the cross-platform patches picked up in general. For
instance, see the patches like:
714acdbd1c94 arch: rename copy_thread_tls() back to copy_thread()
140c8180eb7c arch: remove HAVE_COPY_THREAD_TLS
They touched the files from different files, but still have been merged in.
Maybe I should have copied these three patches to the "linux-arch@vger.kernel.org"
list or some other mailing list...
-Sergey
> --
> Florian
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name
2020-10-14 18:11 ` Serge Semin
@ 2020-10-14 18:41 ` Florian Fainelli
2020-10-14 21:21 ` Serge Semin
0 siblings, 1 reply; 11+ messages in thread
From: Florian Fainelli @ 2020-10-14 18:41 UTC (permalink / raw)
To: Serge Semin
Cc: Neil Armstrong, Benjamin Herrenschmidt, Bjorn Andersson,
Paul Cercueil, Paul Mackerras, Pavel Parkhomenko, linux-stm32,
Michael Ellerman, Rafał Miłecki, Alexey Brodkin,
Wei Xu, Andy Gross, bcm-kernel-feedback-list, Kevin Hilman,
linux-snps-arc, devicetree, Alexandre Torgue, Mathias Nyman,
Hauke Mehrtens, Lad Prabhakar, Vladimir Zapolskiy, Rob Herring,
linux-mediatek, Matthias Brugger, Alexey Malahov,
linux-arm-kernel, Roger Quadros, Felipe Balbi,
Thomas Bogendoerfer, Greg Kroah-Hartman, Yoshihiro Shimoda,
linux-usb, linux-mips, Serge Semin, linux-kernel, Manu Gautam,
Maxime Coquelin, Vineet Gupta, linuxppc-dev
On 10/14/20 11:11 AM, Serge Semin wrote:
> On Wed, Oct 14, 2020 at 11:00:45AM -0700, Florian Fainelli wrote:
>> On 10/14/20 3:14 AM, Serge Semin wrote:
>>> In accordance with the Generic EHCI/OHCI bindings the corresponding node
>>> name is suppose to comply with the Generic USB HCD DT schema, which
>>> requires the USB nodes to have the name acceptable by the regexp:
>>> "^usb(@.*)?" . Let's fix the DTS files, which have the nodes defined with
>>> incompatible names.
>>>
>>> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
>>>
>>> ---
>>>
>>> Please, test the patch out to make sure it doesn't brake the dependent DTS
>>> files. I did only a manual grepping of the possible nodes dependencies.
>>
>
>> Not sure how you envisioned these change to be picked up, but you may
>> need to split these changes between ARM/ARM64, MIPS and PowerPC at
>> least. And within ARM/ARM64 you will most likely have to split according
>> to the various SoC maintainers.
>
> Hmm, I don't really know how it's going to be done in this case, but there must
> be a way to get the cross-platform patches picked up in general. For
> instance, see the patches like:
> 714acdbd1c94 arch: rename copy_thread_tls() back to copy_thread()
> 140c8180eb7c arch: remove HAVE_COPY_THREAD_TLS
> They touched the files from different files, but still have been merged in.
That situation is different, when a new facility is added and someone
has gone through the work of adding support for all architectures (or
nearly all of them), you want them to be merged in a way that limits
merge conflicts with other architecture changes.
Here you are fixing warnings, and each file you touch can clearly be
independently change from other files in the series without causing
merge conflicts. You are however creating the potential for merge
conflicts with other changes that the various SoC maintainers have
queued up.
> Maybe I should have copied these three patches to the "linux-arch@vger.kernel.org"
> list or some other mailing list...
Maybe Rob can queue them through his device tree repository, with the
ack of the various SoC maintainers...
--
Florian
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name
2020-10-14 18:41 ` Florian Fainelli
@ 2020-10-14 21:21 ` Serge Semin
0 siblings, 0 replies; 11+ messages in thread
From: Serge Semin @ 2020-10-14 21:21 UTC (permalink / raw)
To: Florian Fainelli, Rob Herring
Cc: Neil Armstrong, Benjamin Herrenschmidt, Bjorn Andersson,
Paul Cercueil, Paul Mackerras, Pavel Parkhomenko, linux-stm32,
Michael Ellerman, Rafał Miłecki, Alexey Brodkin,
Wei Xu, Andy Gross, bcm-kernel-feedback-list, Kevin Hilman,
linux-snps-arc, devicetree, Alexandre Torgue, Mathias Nyman,
Hauke Mehrtens, Lad Prabhakar, Vladimir Zapolskiy,
linux-mediatek, Matthias Brugger, Alexey Malahov,
linux-arm-kernel, Roger Quadros, Felipe Balbi,
Thomas Bogendoerfer, Greg Kroah-Hartman, Yoshihiro Shimoda,
linux-usb, linux-mips, linux-kernel, Manu Gautam,
Maxime Coquelin, Vineet Gupta, linuxppc-dev
On Wed, Oct 14, 2020 at 11:41:17AM -0700, Florian Fainelli wrote:
> On 10/14/20 11:11 AM, Serge Semin wrote:
> > On Wed, Oct 14, 2020 at 11:00:45AM -0700, Florian Fainelli wrote:
> >> On 10/14/20 3:14 AM, Serge Semin wrote:
> >>> In accordance with the Generic EHCI/OHCI bindings the corresponding node
> >>> name is suppose to comply with the Generic USB HCD DT schema, which
> >>> requires the USB nodes to have the name acceptable by the regexp:
> >>> "^usb(@.*)?" . Let's fix the DTS files, which have the nodes defined with
> >>> incompatible names.
> >>>
> >>> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> >>>
> >>> ---
> >>>
> >>> Please, test the patch out to make sure it doesn't brake the dependent DTS
> >>> files. I did only a manual grepping of the possible nodes dependencies.
> >>
> >
> >> Not sure how you envisioned these change to be picked up, but you may
> >> need to split these changes between ARM/ARM64, MIPS and PowerPC at
> >> least. And within ARM/ARM64 you will most likely have to split according
> >> to the various SoC maintainers.
> >
> > Hmm, I don't really know how it's going to be done in this case, but there must
> > be a way to get the cross-platform patches picked up in general. For
> > instance, see the patches like:
> > 714acdbd1c94 arch: rename copy_thread_tls() back to copy_thread()
> > 140c8180eb7c arch: remove HAVE_COPY_THREAD_TLS
> > They touched the files from different files, but still have been merged in.
>
> That situation is different, when a new facility is added and someone
> has gone through the work of adding support for all architectures (or
> nearly all of them), you want them to be merged in a way that limits
> merge conflicts with other architecture changes.
>
> Here you are fixing warnings, and each file you touch can clearly be
> independently change from other files in the series without causing
> merge conflicts. You are however creating the potential for merge
> conflicts with other changes that the various SoC maintainers have
> queued up.
>
> > Maybe I should have copied these three patches to the "linux-arch@vger.kernel.org"
> > list or some other mailing list...
>
> Maybe Rob can queue them through his device tree repository, with the
> ack of the various SoC maintainers...
That's what I hoped for in the first place. But AFAICS now Rob does the splitting
of his patches himself, while the repo is used either for the
Documentation/devicetree/ patches or for the Rob'es own work. So it seems to me
I'll have to split the series up and resubmit... (
Hope I am wrong. So, @Rob, will you be able to merge this and the next two patches
in via your repo or you'd rather suggest for me to split it up and resubmit?
-Sergey
> --
> Florian
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name
2020-10-14 10:14 ` [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name Serge Semin
2020-10-14 18:00 ` Florian Fainelli
@ 2020-10-14 18:56 ` Paul Cercueil
2020-10-14 19:12 ` Alexey Brodkin
2020-10-15 8:05 ` Amelie DELAUNAY
` (2 subsequent siblings)
4 siblings, 1 reply; 11+ messages in thread
From: Paul Cercueil @ 2020-10-14 18:56 UTC (permalink / raw)
To: Serge Semin
Cc: Neil Armstrong, Benjamin Herrenschmidt, Bjorn Andersson,
Paul Mackerras, Pavel Parkhomenko, linux-stm32, Michael Ellerman,
Rafał Miłecki, Alexey Brodkin, Wei Xu, Andy Gross,
bcm-kernel-feedback-list, Kevin Hilman, linux-snps-arc,
devicetree, Alexandre Torgue, Mathias Nyman, Hauke Mehrtens,
Lad Prabhakar, Vladimir Zapolskiy, Rob Herring, linux-mediatek,
Matthias Brugger, Alexey Malahov, linux-arm-kernel,
Roger Quadros, Felipe Balbi, Thomas Bogendoerfer, Vineet Gupta,
Yoshihiro Shimoda, linux-usb, linux-mips, Serge Semin,
linux-kernel, Manu Gautam, Maxime Coquelin, Greg Kroah-Hartman,
linuxppc-dev
Le mer. 14 oct. 2020 à 13:14, Serge Semin
<Sergey.Semin@baikalelectronics.ru> a écrit :
> In accordance with the Generic EHCI/OHCI bindings the corresponding
> node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Let's fix the DTS files, which have the nodes defined
> with
> incompatible names.
>
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
>
> ---
>
> Please, test the patch out to make sure it doesn't brake the
> dependent DTS
> files. I did only a manual grepping of the possible nodes
> dependencies.
> ---
> arch/arc/boot/dts/axs10x_mb.dtsi | 4 ++--
> arch/arc/boot/dts/hsdk.dts | 4 ++--
> arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 2 +-
> arch/arm/boot/dts/bcm5301x.dtsi | 4 ++--
> arch/arm/boot/dts/bcm53573.dtsi | 4 ++--
> arch/arm/boot/dts/hisi-x5hd2.dtsi | 4 ++--
> arch/arm/boot/dts/lpc18xx.dtsi | 4 ++--
> arch/arm/boot/dts/stm32mp151.dtsi | 4 ++--
> arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 4 ++--
> arch/arm64/boot/dts/hisilicon/hip06.dtsi | 4 ++--
> arch/arm64/boot/dts/hisilicon/hip07.dtsi | 4 ++--
> arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +-
> arch/mips/boot/dts/ingenic/jz4770.dtsi | 2 +-
For jz4740.dtsi and jz4770.dtsi:
Acked-by: Paul Cercueil <paul@crapouillou.net>
Cheers,
-Paul
> arch/mips/boot/dts/mti/sead3.dts | 2 +-
> arch/mips/boot/dts/ralink/mt7628a.dtsi | 2 +-
> arch/powerpc/boot/dts/akebono.dts | 6 +++---
> 16 files changed, 28 insertions(+), 28 deletions(-)
>
> diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi
> b/arch/arc/boot/dts/axs10x_mb.dtsi
> index 99d3e7175bf7..b64435385304 100644
> --- a/arch/arc/boot/dts/axs10x_mb.dtsi
> +++ b/arch/arc/boot/dts/axs10x_mb.dtsi
> @@ -87,13 +87,13 @@ gmac: ethernet@18000 {
> mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
> };
>
> - ehci@40000 {
> + usb@40000 {
> compatible = "generic-ehci";
> reg = < 0x40000 0x100 >;
> interrupts = < 8 >;
> };
>
> - ohci@60000 {
> + usb@60000 {
> compatible = "generic-ohci";
> reg = < 0x60000 0x100 >;
> interrupts = < 8 >;
> diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
> index dcaa44e408ac..fdd4f7f635d3 100644
> --- a/arch/arc/boot/dts/hsdk.dts
> +++ b/arch/arc/boot/dts/hsdk.dts
> @@ -234,7 +234,7 @@ phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
> };
> };
>
> - ohci@60000 {
> + usb@60000 {
> compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
> reg = <0x60000 0x100>;
> interrupts = <15>;
> @@ -242,7 +242,7 @@ ohci@60000 {
> dma-coherent;
> };
>
> - ehci@40000 {
> + usb@40000 {
> compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
> reg = <0x40000 0x100>;
> interrupts = <15>;
> diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
> b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
> index cbb179770293..90a412026e64 100644
> --- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
> +++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
> @@ -46,7 +46,7 @@ ethernet@18000 {
> clock-names = "stmmaceth";
> };
>
> - ehci@40000 {
> + usb@40000 {
> compatible = "generic-ehci";
> reg = < 0x40000 0x100 >;
> interrupts = < 8 >;
> diff --git a/arch/arm/boot/dts/bcm5301x.dtsi
> b/arch/arm/boot/dts/bcm5301x.dtsi
> index 0016720ce530..bf5656d79a55 100644
> --- a/arch/arm/boot/dts/bcm5301x.dtsi
> +++ b/arch/arm/boot/dts/bcm5301x.dtsi
> @@ -261,7 +261,7 @@ usb2: usb2@21000 {
>
> interrupt-parent = <&gic>;
>
> - ehci: ehci@21000 {
> + ehci: usb@21000 {
> #usb-cells = <0>;
>
> compatible = "generic-ehci";
> @@ -283,7 +283,7 @@ ehci_port2: port@2 {
> };
> };
>
> - ohci: ohci@22000 {
> + ohci: usb@22000 {
> #usb-cells = <0>;
>
> compatible = "generic-ohci";
> diff --git a/arch/arm/boot/dts/bcm53573.dtsi
> b/arch/arm/boot/dts/bcm53573.dtsi
> index 4af8e3293cff..51546fccc616 100644
> --- a/arch/arm/boot/dts/bcm53573.dtsi
> +++ b/arch/arm/boot/dts/bcm53573.dtsi
> @@ -135,7 +135,7 @@ usb2: usb2@4000 {
> #address-cells = <1>;
> #size-cells = <1>;
>
> - ehci: ehci@4000 {
> + ehci: usb@4000 {
> compatible = "generic-ehci";
> reg = <0x4000 0x1000>;
> interrupt-parent = <&gic>;
> @@ -155,7 +155,7 @@ ehci_port2: port@2 {
> };
> };
>
> - ohci: ohci@d000 {
> + ohci: usb@d000 {
> #usb-cells = <0>;
>
> compatible = "generic-ohci";
> diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi
> b/arch/arm/boot/dts/hisi-x5hd2.dtsi
> index 3ee7967c202d..693b85b2cc7d 100644
> --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
> +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
> @@ -452,14 +452,14 @@ gmac1: ethernet@1841000 {
> status = "disabled";
> };
>
> - usb0: ehci@1890000 {
> + usb0: usb@1890000 {
> compatible = "generic-ehci";
> reg = <0x1890000 0x1000>;
> interrupts = <0 66 4>;
> clocks = <&clock HIX5HD2_USB_CLK>;
> };
>
> - usb1: ohci@1880000 {
> + usb1: usb@1880000 {
> compatible = "generic-ohci";
> reg = <0x1880000 0x1000>;
> interrupts = <0 67 4>;
> diff --git a/arch/arm/boot/dts/lpc18xx.dtsi
> b/arch/arm/boot/dts/lpc18xx.dtsi
> index 10b8249b8ab6..82ffd7b0ad8a 100644
> --- a/arch/arm/boot/dts/lpc18xx.dtsi
> +++ b/arch/arm/boot/dts/lpc18xx.dtsi
> @@ -121,7 +121,7 @@ mmcsd: mmcsd@40004000 {
> status = "disabled";
> };
>
> - usb0: ehci@40006100 {
> + usb0: usb@40006100 {
> compatible = "nxp,lpc1850-ehci", "generic-ehci";
> reg = <0x40006100 0x100>;
> interrupts = <8>;
> @@ -133,7 +133,7 @@ usb0: ehci@40006100 {
> status = "disabled";
> };
>
> - usb1: ehci@40007100 {
> + usb1: usb@40007100 {
> compatible = "nxp,lpc1850-ehci", "generic-ehci";
> reg = <0x40007100 0x100>;
> interrupts = <9>;
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi
> b/arch/arm/boot/dts/stm32mp151.dtsi
> index bfe29023fbd5..576f7da564c5 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -1404,7 +1404,7 @@ ethernet0: ethernet@5800a000 {
> status = "disabled";
> };
>
> - usbh_ohci: usbh-ohci@5800c000 {
> + usbh_ohci: usb@5800c000 {
> compatible = "generic-ohci";
> reg = <0x5800c000 0x1000>;
> clocks = <&rcc USBH>;
> @@ -1413,7 +1413,7 @@ usbh_ohci: usbh-ohci@5800c000 {
> status = "disabled";
> };
>
> - usbh_ehci: usbh-ehci@5800d000 {
> + usbh_ehci: usb@5800d000 {
> compatible = "generic-ehci";
> reg = <0x5800d000 0x1000>;
> clocks = <&rcc USBH>;
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
> b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
> index 12bc1d3ed424..a4acecb75c89 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
> @@ -585,7 +585,7 @@ pcie: pcie@9860000 {
> status = "disabled";
> };
>
> - ohci: ohci@9880000 {
> + ohci: usb@9880000 {
> compatible = "generic-ohci";
> reg = <0x9880000 0x10000>;
> interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> @@ -600,7 +600,7 @@ ohci: ohci@9880000 {
> status = "disabled";
> };
>
> - ehci: ehci@9890000 {
> + ehci: usb@9890000 {
> compatible = "generic-ehci";
> reg = <0x9890000 0x10000>;
> interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
> b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
> index 50ceaa959bdc..1226440d54ad 100644
> --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
> @@ -373,7 +373,7 @@ refclk: refclk {
> #clock-cells = <0>;
> };
>
> - usb_ohci: ohci@a7030000 {
> + usb_ohci: usb@a7030000 {
> compatible = "generic-ohci";
> reg = <0x0 0xa7030000 0x0 0x10000>;
> interrupt-parent = <&mbigen_usb>;
> @@ -382,7 +382,7 @@ usb_ohci: ohci@a7030000 {
> status = "disabled";
> };
>
> - usb_ehci: ehci@a7020000 {
> + usb_ehci: usb@a7020000 {
> compatible = "generic-ehci";
> reg = <0x0 0xa7020000 0x0 0x10000>;
> interrupt-parent = <&mbigen_usb>;
> diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi
> b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
> index 4773a533fce5..93f99a5255ac 100644
> --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
> @@ -1253,7 +1253,7 @@ uart0: uart@602b0000 {
> status = "disabled";
> };
>
> - usb_ohci: ohci@a7030000 {
> + usb_ohci: usb@a7030000 {
> compatible = "generic-ohci";
> reg = <0x0 0xa7030000 0x0 0x10000>;
> interrupt-parent = <&mbigen_usb>;
> @@ -1262,7 +1262,7 @@ usb_ohci: ohci@a7030000 {
> status = "disabled";
> };
>
> - usb_ehci: ehci@a7020000 {
> + usb_ehci: usb@a7020000 {
> compatible = "generic-ehci";
> reg = <0x0 0xa7020000 0x0 0x10000>;
> interrupt-parent = <&mbigen_usb>;
> diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi
> b/arch/mips/boot/dts/ingenic/jz4740.dtsi
> index 1520585c235c..b989ff62ffbc 100644
> --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
> @@ -281,7 +281,7 @@ dmac: dma-controller@13020000 {
> clocks = <&cgu JZ4740_CLK_DMA>;
> };
>
> - uhc: uhc@13030000 {
> + uhc: usb@13030000 {
> compatible = "ingenic,jz4740-ohci", "generic-ohci";
> reg = <0x13030000 0x1000>;
>
> diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi
> b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> index fa11ac950499..e45c03038826 100644
> --- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> @@ -417,7 +417,7 @@ dmac1: dma-controller@13420100 {
> interrupts = <23>;
> };
>
> - uhc: uhc@13430000 {
> + uhc: usb@13430000 {
> compatible = "generic-ohci";
> reg = <0x13430000 0x1000>;
>
> diff --git a/arch/mips/boot/dts/mti/sead3.dts
> b/arch/mips/boot/dts/mti/sead3.dts
> index 192c26ff1d3d..1cf6728af8fe 100644
> --- a/arch/mips/boot/dts/mti/sead3.dts
> +++ b/arch/mips/boot/dts/mti/sead3.dts
> @@ -56,7 +56,7 @@ gic: interrupt-controller@1b1c0000 {
> interrupt-parent = <&cpu_intc>;
> };
>
> - ehci@1b200000 {
> + usb@1b200000 {
> compatible = "generic-ehci";
> reg = <0x1b200000 0x1000>;
>
> diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi
> b/arch/mips/boot/dts/ralink/mt7628a.dtsi
> index 892e8ab863c5..45bf96a3d17a 100644
> --- a/arch/mips/boot/dts/ralink/mt7628a.dtsi
> +++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi
> @@ -275,7 +275,7 @@ usb_phy: usb-phy@10120000 {
> reset-names = "host", "device";
> };
>
> - ehci@101c0000 {
> + usb@101c0000 {
> compatible = "generic-ehci";
> reg = <0x101c0000 0x1000>;
>
> diff --git a/arch/powerpc/boot/dts/akebono.dts
> b/arch/powerpc/boot/dts/akebono.dts
> index df18f8dc4642..343326c30380 100644
> --- a/arch/powerpc/boot/dts/akebono.dts
> +++ b/arch/powerpc/boot/dts/akebono.dts
> @@ -126,7 +126,7 @@ SATA0: sata@30000010000 {
> interrupts = <93 2>;
> };
>
> - EHCI0: ehci@30010000000 {
> + EHCI0: usb@30010000000 {
> compatible = "ibm,476gtr-ehci", "generic-ehci";
> reg = <0x300 0x10000000 0x0 0x10000>;
> interrupt-parent = <&MPIC>;
> @@ -140,14 +140,14 @@ SD0: sd@30000000000 {
> interrupt-parent = <&MPIC>;
> };
>
> - OHCI0: ohci@30010010000 {
> + OHCI0: usb@30010010000 {
> compatible = "ibm,476gtr-ohci", "generic-ohci";
> reg = <0x300 0x10010000 0x0 0x10000>;
> interrupt-parent = <&MPIC>;
> interrupts = <89 1>;
> };
>
> - OHCI1: ohci@30010020000 {
> + OHCI1: usb@30010020000 {
> compatible = "ibm,476gtr-ohci", "generic-ohci";
> reg = <0x300 0x10020000 0x0 0x10000>;
> interrupt-parent = <&MPIC>;
> --
> 2.27.0
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name
2020-10-14 18:56 ` Paul Cercueil
@ 2020-10-14 19:12 ` Alexey Brodkin
0 siblings, 0 replies; 11+ messages in thread
From: Alexey Brodkin @ 2020-10-14 19:12 UTC (permalink / raw)
To: Paul Cercueil, Serge Semin
Cc: Neil Armstrong, Benjamin Herrenschmidt, Bjorn Andersson,
Paul Mackerras, Pavel Parkhomenko, linux-stm32, Michael Ellerman,
Rafał Miłecki, Wei Xu, Andy Gross,
bcm-kernel-feedback-list, linux-snps-arc, devicetree,
Alexandre Torgue, Mathias Nyman, Hauke Mehrtens, Vineet Gupta,
Lad Prabhakar, Vladimir Zapolskiy, Rob Herring, linux-mediatek,
Matthias Brugger, Alexey Malahov, linux-arm-kernel,
Roger Quadros, Felipe Balbi, Thomas Bogendoerfer,
Greg Kroah-Hartman, Yoshihiro Shimoda, linux-usb, linux-mips,
Serge Semin, linux-kernel, Manu Gautam, Maxime Coquelin,
Kevin Hilman, linuxppc-dev
Hi Sergey,
> arch/arc/boot/dts/axs10x_mb.dtsi | 4 ++--
> arch/arc/boot/dts/hsdk.dts | 4 ++--
> arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 2 +-
For ARC boards
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name
2020-10-14 10:14 ` [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name Serge Semin
2020-10-14 18:00 ` Florian Fainelli
2020-10-14 18:56 ` Paul Cercueil
@ 2020-10-15 8:05 ` Amelie DELAUNAY
2020-10-15 16:37 ` Florian Fainelli
2020-10-16 7:08 ` Alexandre Torgue
4 siblings, 0 replies; 11+ messages in thread
From: Amelie DELAUNAY @ 2020-10-15 8:05 UTC (permalink / raw)
To: Serge Semin, Mathias Nyman, Felipe Balbi, Greg Kroah-Hartman,
Rob Herring, Alexey Brodkin, Vineet Gupta, Hauke Mehrtens,
Rafał Miłecki, bcm-kernel-feedback-list, Wei Xu,
Vladimir Zapolskiy, Maxime Coquelin, Alexandre Torgue,
Paul Cercueil, Thomas Bogendoerfer, Matthias Brugger,
Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras
Cc: devicetree, linux-snps-arc, linux-mips, Neil Armstrong,
Kevin Hilman, Yoshihiro Shimoda, linux-usb, linux-kernel,
Lad Prabhakar, Serge Semin, Bjorn Andersson, Manu Gautam,
Andy Gross, linux-mediatek, Pavel Parkhomenko, Alexey Malahov,
linuxppc-dev, linux-stm32, linux-arm-kernel, Roger Quadros
Hi Serge,
On 10/14/20 12:14 PM, Serge Semin wrote:
> In accordance with the Generic EHCI/OHCI bindings the corresponding node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Let's fix the DTS files, which have the nodes defined with
> incompatible names.
>
> Signed-off-by: Serge Semin<Sergey.Semin@baikalelectronics.ru>
>
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
> index bfe29023fbd5..576f7da564c5 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -1404,7 +1404,7 @@ ethernet0: ethernet@5800a000 {
> status = "disabled";
> };
>
> - usbh_ohci: usbh-ohci@5800c000 {
> + usbh_ohci: usb@5800c000 {
> compatible = "generic-ohci";
> reg = <0x5800c000 0x1000>;
> clocks = <&rcc USBH>;
> @@ -1413,7 +1413,7 @@ usbh_ohci: usbh-ohci@5800c000 {
> status = "disabled";
> };
>
> - usbh_ehci: usbh-ehci@5800d000 {
> + usbh_ehci: usb@5800d000 {
> compatible = "generic-ehci";
> reg = <0x5800d000 0x1000>;
> clocks = <&rcc USBH>;
For STM32MP151:
Acked-by: Amelie Delaunay <amelie.delaunay@st.com>
Thanks,
Amelie
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name
2020-10-14 10:14 ` [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name Serge Semin
` (2 preceding siblings ...)
2020-10-15 8:05 ` Amelie DELAUNAY
@ 2020-10-15 16:37 ` Florian Fainelli
2020-10-16 7:08 ` Alexandre Torgue
4 siblings, 0 replies; 11+ messages in thread
From: Florian Fainelli @ 2020-10-15 16:37 UTC (permalink / raw)
To: Serge Semin, Mathias Nyman, Felipe Balbi, Greg Kroah-Hartman,
Rob Herring, Alexey Brodkin, Vineet Gupta, Hauke Mehrtens,
Rafał Miłecki, bcm-kernel-feedback-list, Wei Xu,
Vladimir Zapolskiy, Maxime Coquelin, Alexandre Torgue,
Paul Cercueil, Thomas Bogendoerfer, Matthias Brugger,
Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras
Cc: linux-arm-kernel, devicetree, linuxppc-dev, Neil Armstrong,
Kevin Hilman, Yoshihiro Shimoda, linux-usb, linux-mips,
Serge Semin, linux-kernel, Manu Gautam, Andy Gross,
Bjorn Andersson, Pavel Parkhomenko, linux-mediatek,
linux-snps-arc, Lad Prabhakar, linux-stm32, Alexey Malahov,
Roger Quadros
On 10/14/20 3:14 AM, Serge Semin wrote:
> In accordance with the Generic EHCI/OHCI bindings the corresponding node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Let's fix the DTS files, which have the nodes defined with
> incompatible names.
>
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
>
> ---
>
> Please, test the patch out to make sure it doesn't brake the dependent DTS
> files. I did only a manual grepping of the possible nodes dependencies.
> ---
> arch/arm/boot/dts/bcm5301x.dtsi | 4 ++--
> arch/arm/boot/dts/bcm53573.dtsi | 4 ++--
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name
2020-10-14 10:14 ` [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name Serge Semin
` (3 preceding siblings ...)
2020-10-15 16:37 ` Florian Fainelli
@ 2020-10-16 7:08 ` Alexandre Torgue
2020-10-16 8:52 ` Serge Semin
4 siblings, 1 reply; 11+ messages in thread
From: Alexandre Torgue @ 2020-10-16 7:08 UTC (permalink / raw)
To: Serge Semin, Mathias Nyman, Felipe Balbi, Greg Kroah-Hartman,
Rob Herring, Alexey Brodkin, Vineet Gupta, Hauke Mehrtens,
Rafał Miłecki, bcm-kernel-feedback-list, Wei Xu,
Vladimir Zapolskiy, Maxime Coquelin, Paul Cercueil,
Thomas Bogendoerfer, Matthias Brugger, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras
Cc: devicetree, linux-snps-arc, linux-mips, Neil Armstrong,
Kevin Hilman, Yoshihiro Shimoda, linux-usb, linux-kernel,
Lad Prabhakar, Serge Semin, Bjorn Andersson, Manu Gautam,
Andy Gross, linux-mediatek, Pavel Parkhomenko, Alexey Malahov,
linuxppc-dev, linux-stm32, linux-arm-kernel, Roger Quadros
Hi Serge,
On 10/14/20 12:14 PM, Serge Semin wrote:
> In accordance with the Generic EHCI/OHCI bindings the corresponding node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Let's fix the DTS files, which have the nodes defined with
> incompatible names.
>
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
>
> ---
>
> Please, test the patch out to make sure it doesn't brake the dependent DTS
> files. I did only a manual grepping of the possible nodes dependencies.
> ---
> arch/arc/boot/dts/axs10x_mb.dtsi | 4 ++--
> arch/arc/boot/dts/hsdk.dts | 4 ++--
> arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 2 +-
> arch/arm/boot/dts/bcm5301x.dtsi | 4 ++--
> arch/arm/boot/dts/bcm53573.dtsi | 4 ++--
> arch/arm/boot/dts/hisi-x5hd2.dtsi | 4 ++--
> arch/arm/boot/dts/lpc18xx.dtsi | 4 ++--
> arch/arm/boot/dts/stm32mp151.dtsi | 4 ++--
> arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 4 ++--
> arch/arm64/boot/dts/hisilicon/hip06.dtsi | 4 ++--
> arch/arm64/boot/dts/hisilicon/hip07.dtsi | 4 ++--
> arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +-
> arch/mips/boot/dts/ingenic/jz4770.dtsi | 2 +-
> arch/mips/boot/dts/mti/sead3.dts | 2 +-
> arch/mips/boot/dts/ralink/mt7628a.dtsi | 2 +-
> arch/powerpc/boot/dts/akebono.dts | 6 +++---
> 16 files changed, 28 insertions(+), 28 deletions(-)
>
I surely missed something, but we have here in the same patch
modifications for different architectures and different vendors.
Do you plan to split this patch after getting some Acked-by / Tested-by ?
regards
Alex
> diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
> index 99d3e7175bf7..b64435385304 100644
> --- a/arch/arc/boot/dts/axs10x_mb.dtsi
> +++ b/arch/arc/boot/dts/axs10x_mb.dtsi
> @@ -87,13 +87,13 @@ gmac: ethernet@18000 {
> mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
> };
>
> - ehci@40000 {
> + usb@40000 {
> compatible = "generic-ehci";
> reg = < 0x40000 0x100 >;
> interrupts = < 8 >;
> };
>
> - ohci@60000 {
> + usb@60000 {
> compatible = "generic-ohci";
> reg = < 0x60000 0x100 >;
> interrupts = < 8 >;
> diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
> index dcaa44e408ac..fdd4f7f635d3 100644
> --- a/arch/arc/boot/dts/hsdk.dts
> +++ b/arch/arc/boot/dts/hsdk.dts
> @@ -234,7 +234,7 @@ phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
> };
> };
>
> - ohci@60000 {
> + usb@60000 {
> compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
> reg = <0x60000 0x100>;
> interrupts = <15>;
> @@ -242,7 +242,7 @@ ohci@60000 {
> dma-coherent;
> };
>
> - ehci@40000 {
> + usb@40000 {
> compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
> reg = <0x40000 0x100>;
> interrupts = <15>;
> diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
> index cbb179770293..90a412026e64 100644
> --- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
> +++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
> @@ -46,7 +46,7 @@ ethernet@18000 {
> clock-names = "stmmaceth";
> };
>
> - ehci@40000 {
> + usb@40000 {
> compatible = "generic-ehci";
> reg = < 0x40000 0x100 >;
> interrupts = < 8 >;
> diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
> index 0016720ce530..bf5656d79a55 100644
> --- a/arch/arm/boot/dts/bcm5301x.dtsi
> +++ b/arch/arm/boot/dts/bcm5301x.dtsi
> @@ -261,7 +261,7 @@ usb2: usb2@21000 {
>
> interrupt-parent = <&gic>;
>
> - ehci: ehci@21000 {
> + ehci: usb@21000 {
> #usb-cells = <0>;
>
> compatible = "generic-ehci";
> @@ -283,7 +283,7 @@ ehci_port2: port@2 {
> };
> };
>
> - ohci: ohci@22000 {
> + ohci: usb@22000 {
> #usb-cells = <0>;
>
> compatible = "generic-ohci";
> diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
> index 4af8e3293cff..51546fccc616 100644
> --- a/arch/arm/boot/dts/bcm53573.dtsi
> +++ b/arch/arm/boot/dts/bcm53573.dtsi
> @@ -135,7 +135,7 @@ usb2: usb2@4000 {
> #address-cells = <1>;
> #size-cells = <1>;
>
> - ehci: ehci@4000 {
> + ehci: usb@4000 {
> compatible = "generic-ehci";
> reg = <0x4000 0x1000>;
> interrupt-parent = <&gic>;
> @@ -155,7 +155,7 @@ ehci_port2: port@2 {
> };
> };
>
> - ohci: ohci@d000 {
> + ohci: usb@d000 {
> #usb-cells = <0>;
>
> compatible = "generic-ohci";
> diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
> index 3ee7967c202d..693b85b2cc7d 100644
> --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
> +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
> @@ -452,14 +452,14 @@ gmac1: ethernet@1841000 {
> status = "disabled";
> };
>
> - usb0: ehci@1890000 {
> + usb0: usb@1890000 {
> compatible = "generic-ehci";
> reg = <0x1890000 0x1000>;
> interrupts = <0 66 4>;
> clocks = <&clock HIX5HD2_USB_CLK>;
> };
>
> - usb1: ohci@1880000 {
> + usb1: usb@1880000 {
> compatible = "generic-ohci";
> reg = <0x1880000 0x1000>;
> interrupts = <0 67 4>;
> diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
> index 10b8249b8ab6..82ffd7b0ad8a 100644
> --- a/arch/arm/boot/dts/lpc18xx.dtsi
> +++ b/arch/arm/boot/dts/lpc18xx.dtsi
> @@ -121,7 +121,7 @@ mmcsd: mmcsd@40004000 {
> status = "disabled";
> };
>
> - usb0: ehci@40006100 {
> + usb0: usb@40006100 {
> compatible = "nxp,lpc1850-ehci", "generic-ehci";
> reg = <0x40006100 0x100>;
> interrupts = <8>;
> @@ -133,7 +133,7 @@ usb0: ehci@40006100 {
> status = "disabled";
> };
>
> - usb1: ehci@40007100 {
> + usb1: usb@40007100 {
> compatible = "nxp,lpc1850-ehci", "generic-ehci";
> reg = <0x40007100 0x100>;
> interrupts = <9>;
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
> index bfe29023fbd5..576f7da564c5 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -1404,7 +1404,7 @@ ethernet0: ethernet@5800a000 {
> status = "disabled";
> };
>
> - usbh_ohci: usbh-ohci@5800c000 {
> + usbh_ohci: usb@5800c000 {
> compatible = "generic-ohci";
> reg = <0x5800c000 0x1000>;
> clocks = <&rcc USBH>;
> @@ -1413,7 +1413,7 @@ usbh_ohci: usbh-ohci@5800c000 {
> status = "disabled";
> };
>
> - usbh_ehci: usbh-ehci@5800d000 {
> + usbh_ehci: usb@5800d000 {
> compatible = "generic-ehci";
> reg = <0x5800d000 0x1000>;
> clocks = <&rcc USBH>;
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
> index 12bc1d3ed424..a4acecb75c89 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
> @@ -585,7 +585,7 @@ pcie: pcie@9860000 {
> status = "disabled";
> };
>
> - ohci: ohci@9880000 {
> + ohci: usb@9880000 {
> compatible = "generic-ohci";
> reg = <0x9880000 0x10000>;
> interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> @@ -600,7 +600,7 @@ ohci: ohci@9880000 {
> status = "disabled";
> };
>
> - ehci: ehci@9890000 {
> + ehci: usb@9890000 {
> compatible = "generic-ehci";
> reg = <0x9890000 0x10000>;
> interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
> index 50ceaa959bdc..1226440d54ad 100644
> --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
> @@ -373,7 +373,7 @@ refclk: refclk {
> #clock-cells = <0>;
> };
>
> - usb_ohci: ohci@a7030000 {
> + usb_ohci: usb@a7030000 {
> compatible = "generic-ohci";
> reg = <0x0 0xa7030000 0x0 0x10000>;
> interrupt-parent = <&mbigen_usb>;
> @@ -382,7 +382,7 @@ usb_ohci: ohci@a7030000 {
> status = "disabled";
> };
>
> - usb_ehci: ehci@a7020000 {
> + usb_ehci: usb@a7020000 {
> compatible = "generic-ehci";
> reg = <0x0 0xa7020000 0x0 0x10000>;
> interrupt-parent = <&mbigen_usb>;
> diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
> index 4773a533fce5..93f99a5255ac 100644
> --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
> @@ -1253,7 +1253,7 @@ uart0: uart@602b0000 {
> status = "disabled";
> };
>
> - usb_ohci: ohci@a7030000 {
> + usb_ohci: usb@a7030000 {
> compatible = "generic-ohci";
> reg = <0x0 0xa7030000 0x0 0x10000>;
> interrupt-parent = <&mbigen_usb>;
> @@ -1262,7 +1262,7 @@ usb_ohci: ohci@a7030000 {
> status = "disabled";
> };
>
> - usb_ehci: ehci@a7020000 {
> + usb_ehci: usb@a7020000 {
> compatible = "generic-ehci";
> reg = <0x0 0xa7020000 0x0 0x10000>;
> interrupt-parent = <&mbigen_usb>;
> diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
> index 1520585c235c..b989ff62ffbc 100644
> --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
> @@ -281,7 +281,7 @@ dmac: dma-controller@13020000 {
> clocks = <&cgu JZ4740_CLK_DMA>;
> };
>
> - uhc: uhc@13030000 {
> + uhc: usb@13030000 {
> compatible = "ingenic,jz4740-ohci", "generic-ohci";
> reg = <0x13030000 0x1000>;
>
> diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> index fa11ac950499..e45c03038826 100644
> --- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> @@ -417,7 +417,7 @@ dmac1: dma-controller@13420100 {
> interrupts = <23>;
> };
>
> - uhc: uhc@13430000 {
> + uhc: usb@13430000 {
> compatible = "generic-ohci";
> reg = <0x13430000 0x1000>;
>
> diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
> index 192c26ff1d3d..1cf6728af8fe 100644
> --- a/arch/mips/boot/dts/mti/sead3.dts
> +++ b/arch/mips/boot/dts/mti/sead3.dts
> @@ -56,7 +56,7 @@ gic: interrupt-controller@1b1c0000 {
> interrupt-parent = <&cpu_intc>;
> };
>
> - ehci@1b200000 {
> + usb@1b200000 {
> compatible = "generic-ehci";
> reg = <0x1b200000 0x1000>;
>
> diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi
> index 892e8ab863c5..45bf96a3d17a 100644
> --- a/arch/mips/boot/dts/ralink/mt7628a.dtsi
> +++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi
> @@ -275,7 +275,7 @@ usb_phy: usb-phy@10120000 {
> reset-names = "host", "device";
> };
>
> - ehci@101c0000 {
> + usb@101c0000 {
> compatible = "generic-ehci";
> reg = <0x101c0000 0x1000>;
>
> diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts
> index df18f8dc4642..343326c30380 100644
> --- a/arch/powerpc/boot/dts/akebono.dts
> +++ b/arch/powerpc/boot/dts/akebono.dts
> @@ -126,7 +126,7 @@ SATA0: sata@30000010000 {
> interrupts = <93 2>;
> };
>
> - EHCI0: ehci@30010000000 {
> + EHCI0: usb@30010000000 {
> compatible = "ibm,476gtr-ehci", "generic-ehci";
> reg = <0x300 0x10000000 0x0 0x10000>;
> interrupt-parent = <&MPIC>;
> @@ -140,14 +140,14 @@ SD0: sd@30000000000 {
> interrupt-parent = <&MPIC>;
> };
>
> - OHCI0: ohci@30010010000 {
> + OHCI0: usb@30010010000 {
> compatible = "ibm,476gtr-ohci", "generic-ohci";
> reg = <0x300 0x10010000 0x0 0x10000>;
> interrupt-parent = <&MPIC>;
> interrupts = <89 1>;
> };
>
> - OHCI1: ohci@30010020000 {
> + OHCI1: usb@30010020000 {
> compatible = "ibm,476gtr-ohci", "generic-ohci";
> reg = <0x300 0x10020000 0x0 0x10000>;
> interrupt-parent = <&MPIC>;
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name
2020-10-16 7:08 ` Alexandre Torgue
@ 2020-10-16 8:52 ` Serge Semin
0 siblings, 0 replies; 11+ messages in thread
From: Serge Semin @ 2020-10-16 8:52 UTC (permalink / raw)
To: Alexandre Torgue
Cc: Neil Armstrong, Benjamin Herrenschmidt, Bjorn Andersson,
Paul Cercueil, Paul Mackerras, Pavel Parkhomenko, linux-stm32,
Michael Ellerman, Rafał Miłecki, Alexey Brodkin,
Wei Xu, Andy Gross, bcm-kernel-feedback-list, Kevin Hilman,
linux-snps-arc, devicetree, Mathias Nyman, Hauke Mehrtens,
Lad Prabhakar, Vladimir Zapolskiy, Rob Herring, linux-mediatek,
Matthias Brugger, Alexey Malahov, linux-arm-kernel,
Roger Quadros, Felipe Balbi, Thomas Bogendoerfer,
Greg Kroah-Hartman, Yoshihiro Shimoda, linux-usb, linux-mips,
Serge Semin, linux-kernel, Manu Gautam, Maxime Coquelin,
Vineet Gupta, linuxppc-dev
Hello Alexandre,
On Fri, Oct 16, 2020 at 09:08:23AM +0200, Alexandre Torgue wrote:
> Hi Serge,
>
> On 10/14/20 12:14 PM, Serge Semin wrote:
> > In accordance with the Generic EHCI/OHCI bindings the corresponding node
> > name is suppose to comply with the Generic USB HCD DT schema, which
> > requires the USB nodes to have the name acceptable by the regexp:
> > "^usb(@.*)?" . Let's fix the DTS files, which have the nodes defined with
> > incompatible names.
> >
> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> >
> > ---
> >
> > Please, test the patch out to make sure it doesn't brake the dependent DTS
> > files. I did only a manual grepping of the possible nodes dependencies.
> > ---
> > arch/arc/boot/dts/axs10x_mb.dtsi | 4 ++--
> > arch/arc/boot/dts/hsdk.dts | 4 ++--
> > arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 2 +-
> > arch/arm/boot/dts/bcm5301x.dtsi | 4 ++--
> > arch/arm/boot/dts/bcm53573.dtsi | 4 ++--
> > arch/arm/boot/dts/hisi-x5hd2.dtsi | 4 ++--
> > arch/arm/boot/dts/lpc18xx.dtsi | 4 ++--
> > arch/arm/boot/dts/stm32mp151.dtsi | 4 ++--
> > arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 4 ++--
> > arch/arm64/boot/dts/hisilicon/hip06.dtsi | 4 ++--
> > arch/arm64/boot/dts/hisilicon/hip07.dtsi | 4 ++--
> > arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +-
> > arch/mips/boot/dts/ingenic/jz4770.dtsi | 2 +-
> > arch/mips/boot/dts/mti/sead3.dts | 2 +-
> > arch/mips/boot/dts/ralink/mt7628a.dtsi | 2 +-
> > arch/powerpc/boot/dts/akebono.dts | 6 +++---
> > 16 files changed, 28 insertions(+), 28 deletions(-)
> >
>
> I surely missed something, but we have here in the same patch modifications
> for different architectures and different vendors.
>
> Do you plan to split this patch after getting some Acked-by / Tested-by ?
Yeah, I'll split this patch and two next ones up in v3.
-Sergey
>
> regards
> Alex
>
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 11+ messages in thread