* [PATCH v4 01/16] dt-bindings: power: Add bindings for the Mediatek SCPSYS power domains controller
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-11-27 2:24 ` Weiyi Lu
2020-10-30 11:36 ` [PATCH v4 02/16] soc: mediatek: Add MediaTek SCPSYS power domains Enric Balletbo i Serra
` (15 subsequent siblings)
16 siblings, 1 reply; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: Rob Herring, drinkcat, weiyi.lu, devicetree, Rob Herring,
fparent, Matthias Brugger, linux-mediatek, hsinyi, matthias.bgg,
Collabora Kernel ML, linux-arm-kernel
The System Control Processor System (SCPSYS) has several power management
related tasks in the system. Add the bindings to define the power
domains for the SCPSYS power controller.
Co-developed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes in v4:
- Fix indentation warnings reported by yamllint
Changes in v3:
- Use hex for unit-addresses.
- Define child nodes for nested power domains even are duplicated, but
more clear than adding a regex scaped to be a valid URI.
Changes in v2:
- Use generic node names (power-domain).
- Define valid values for common properties like #power-domain-cells.
.../power/mediatek,power-controller.yaml | 289 ++++++++++++++++++
1 file changed, 289 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
new file mode 100644
index 000000000000..73b8988bd063
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
@@ -0,0 +1,289 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Power Domains Controller
+
+maintainers:
+ - Weiyi Lu <weiyi.lu@mediatek.com>
+ - Matthias Brugger <mbrugger@suse.com>
+
+description: |
+ Mediatek processors include support for multiple power domains which can be
+ powered up/down by software based on different application scenes to save power.
+
+ IP cores belonging to a power domain should contain a 'power-domains'
+ property that is a phandle for SCPSYS node representing the domain.
+
+properties:
+ $nodename:
+ const: power-controller
+
+ compatible:
+ enum:
+ - mediatek,mt8173-power-controller
+
+ '#power-domain-cells':
+ const: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^power-domain@[0-9a-f]+$":
+ type: object
+ description: |
+ Represents the power domains within the power controller node as documented
+ in Documentation/devicetree/bindings/power/power-domain.yaml.
+
+ properties:
+
+ '#power-domain-cells':
+ description:
+ Must be 0 for nodes representing a single PM domain and 1 for nodes
+ providing multiple PM domains.
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ reg:
+ description: |
+ Power domain index. Valid values are defined in:
+ "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
+ maxItems: 1
+
+ clocks:
+ description: |
+ A number of phandles to clocks that need to be enabled during domain
+ power-up sequencing.
+
+ clock-names:
+ description: |
+ List of names of clocks, in order to match the power-up sequencing
+ for each power domain we need to group the clocks by name. BASIC
+ clocks need to be enabled before enabling the corresponding power
+ domain, and should not have a '-' in their name (i.e mm, mfg, venc).
+ SUSBYS clocks need to be enabled before releasing the bus protection,
+ and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
+
+ In order to follow properly the power-up sequencing, the clocks must
+ be specified by order, adding first the BASIC clocks followed by the
+ SUSBSYS clocks.
+
+ mediatek,infracfg:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description: phandle to the device containing the INFRACFG register range.
+
+ mediatek,smi:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description: phandle to the device containing the SMI register range.
+
+ patternProperties:
+ "^power-domain@[0-9a-f]+$":
+ type: object
+ description: |
+ Represents a power domain child within a power domain parent node.
+
+ properties:
+
+ '#power-domain-cells':
+ description:
+ Must be 0 for nodes representing a single PM domain and 1 for nodes
+ providing multiple PM domains.
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: |
+ A number of phandles to clocks that need to be enabled during domain
+ power-up sequencing.
+
+ clock-names:
+ description: |
+ List of names of clocks, in order to match the power-up sequencing
+ for each power domain we need to group the clocks by name. BASIC
+ clocks need to be enabled before enabling the corresponding power
+ domain, and should not have a '-' in their name (i.e mm, mfg, venc).
+ SUSBYS clocks need to be enabled before releasing the bus protection,
+ and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
+
+ In order to follow properly the power-up sequencing, the clocks must
+ be specified by order, adding first the BASIC clocks followed by the
+ SUSBSYS clocks.
+
+ mediatek,infracfg:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description: phandle to the device containing the INFRACFG register range.
+
+ mediatek,smi:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description: phandle to the device containing the SMI register range.
+
+ patternProperties:
+ "^power-domain@[0-9a-f]+$":
+ type: object
+ description: |
+ Represents a power domain child within a power domain parent node.
+
+ properties:
+
+ '#power-domain-cells':
+ description:
+ Must be 0 for nodes representing a single PM domain and 1 for nodes
+ providing multiple PM domains.
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: |
+ A number of phandles to clocks that need to be enabled during domain
+ power-up sequencing.
+
+ clock-names:
+ description: |
+ List of names of clocks, in order to match the power-up sequencing
+ for each power domain we need to group the clocks by name. BASIC
+ clocks need to be enabled before enabling the corresponding power
+ domain, and should not have a '-' in their name (i.e mm, mfg, venc).
+ SUSBYS clocks need to be enabled before releasing the bus protection,
+ and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
+
+ In order to follow properly the power-up sequencing, the clocks must
+ be specified by order, adding first the BASIC clocks followed by the
+ SUSBSYS clocks.
+
+ mediatek,infracfg:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description: phandle to the device containing the INFRACFG register range.
+
+ mediatek,smi:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description: phandle to the device containing the SMI register range.
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ scpsys: syscon@10006000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0 0x10006000 0 0x1000>;
+
+ spm: power-controller {
+ compatible = "mediatek,mt8173-power-controller";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ /* power domains of the SoC */
+ power-domain@MT8173_POWER_DOMAIN_VDEC {
+ reg = <MT8173_POWER_DOMAIN_VDEC>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>;
+ clock-names = "mm";
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_VENC {
+ reg = <MT8173_POWER_DOMAIN_VENC>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>,
+ <&topckgen CLK_TOP_VENC_SEL>;
+ clock-names = "mm", "venc";
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_ISP {
+ reg = <MT8173_POWER_DOMAIN_ISP>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>;
+ clock-names = "mm";
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_MM {
+ reg = <MT8173_POWER_DOMAIN_MM>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>;
+ clock-names = "mm";
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_VENC_LT {
+ reg = <MT8173_POWER_DOMAIN_VENC_LT>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>,
+ <&topckgen CLK_TOP_VENC_LT_SEL>;
+ clock-names = "mm", "venclt";
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_AUDIO {
+ reg = <MT8173_POWER_DOMAIN_AUDIO>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_USB {
+ reg = <MT8173_POWER_DOMAIN_USB>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
+ reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
+ clocks = <&clk26m>;
+ clock-names = "mfg";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ power-domain@MT8173_POWER_DOMAIN_MFG_2D {
+ reg = <MT8173_POWER_DOMAIN_MFG_2D>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ power-domain@MT8173_POWER_DOMAIN_MFG {
+ reg = <MT8173_POWER_DOMAIN_MFG>;
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ };
+ };
+ };
+ };
+ };
+ };
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* Re: [PATCH v4 01/16] dt-bindings: power: Add bindings for the Mediatek SCPSYS power domains controller
2020-10-30 11:36 ` [PATCH v4 01/16] dt-bindings: power: Add bindings for the Mediatek " Enric Balletbo i Serra
@ 2020-11-27 2:24 ` Weiyi Lu
2020-11-27 8:56 ` Enric Balletbo i Serra
0 siblings, 1 reply; 23+ messages in thread
From: Weiyi Lu @ 2020-11-27 2:24 UTC (permalink / raw)
To: Enric Balletbo i Serra, Matthias Brugger
Cc: Rob Herring, drinkcat, devicetree, linux-kernel, Rob Herring,
fparent, Matthias Brugger, linux-mediatek, hsinyi, matthias.bgg,
Collabora Kernel ML, linux-arm-kernel
On Fri, 2020-10-30 at 12:36 +0100, Enric Balletbo i Serra wrote:
> The System Control Processor System (SCPSYS) has several power management
> related tasks in the system. Add the bindings to define the power
> domains for the SCPSYS power controller.
>
> Co-developed-by: Matthias Brugger <mbrugger@suse.com>
> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>
> Changes in v4:
> - Fix indentation warnings reported by yamllint
>
> Changes in v3:
> - Use hex for unit-addresses.
> - Define child nodes for nested power domains even are duplicated, but
> more clear than adding a regex scaped to be a valid URI.
>
> Changes in v2:
> - Use generic node names (power-domain).
> - Define valid values for common properties like #power-domain-cells.
>
> .../power/mediatek,power-controller.yaml | 289 ++++++++++++++++++
> 1 file changed, 289 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
>
> diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> new file mode 100644
> index 000000000000..73b8988bd063
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> @@ -0,0 +1,289 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek Power Domains Controller
> +
> +maintainers:
> + - Weiyi Lu <weiyi.lu@mediatek.com>
> + - Matthias Brugger <mbrugger@suse.com>
> +
> +description: |
> + Mediatek processors include support for multiple power domains which can be
> + powered up/down by software based on different application scenes to save power.
> +
> + IP cores belonging to a power domain should contain a 'power-domains'
> + property that is a phandle for SCPSYS node representing the domain.
> +
> +properties:
> + $nodename:
> + const: power-controller
> +
> + compatible:
> + enum:
> + - mediatek,mt8173-power-controller
> +
> + '#power-domain-cells':
> + const: 1
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> +patternProperties:
> + "^power-domain@[0-9a-f]+$":
> + type: object
> + description: |
> + Represents the power domains within the power controller node as documented
> + in Documentation/devicetree/bindings/power/power-domain.yaml.
> +
> + properties:
> +
> + '#power-domain-cells':
> + description:
> + Must be 0 for nodes representing a single PM domain and 1 for nodes
> + providing multiple PM domains.
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + reg:
> + description: |
> + Power domain index. Valid values are defined in:
> + "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
> + maxItems: 1
> +
> + clocks:
> + description: |
> + A number of phandles to clocks that need to be enabled during domain
> + power-up sequencing.
> +
> + clock-names:
> + description: |
> + List of names of clocks, in order to match the power-up sequencing
> + for each power domain we need to group the clocks by name. BASIC
> + clocks need to be enabled before enabling the corresponding power
> + domain, and should not have a '-' in their name (i.e mm, mfg, venc).
> + SUSBYS clocks need to be enabled before releasing the bus protection,
> + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
> +
> + In order to follow properly the power-up sequencing, the clocks must
> + be specified by order, adding first the BASIC clocks followed by the
> + SUSBSYS clocks.
> +
> + mediatek,infracfg:
> + $ref: /schemas/types.yaml#definitions/phandle
> + description: phandle to the device containing the INFRACFG register range.
> +
> + mediatek,smi:
> + $ref: /schemas/types.yaml#definitions/phandle
> + description: phandle to the device containing the SMI register range.
> +
> + patternProperties:
> + "^power-domain@[0-9a-f]+$":
> + type: object
> + description: |
> + Represents a power domain child within a power domain parent node.
> +
> + properties:
> +
> + '#power-domain-cells':
> + description:
> + Must be 0 for nodes representing a single PM domain and 1 for nodes
> + providing multiple PM domains.
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + A number of phandles to clocks that need to be enabled during domain
> + power-up sequencing.
> +
> + clock-names:
> + description: |
> + List of names of clocks, in order to match the power-up sequencing
> + for each power domain we need to group the clocks by name. BASIC
> + clocks need to be enabled before enabling the corresponding power
> + domain, and should not have a '-' in their name (i.e mm, mfg, venc).
> + SUSBYS clocks need to be enabled before releasing the bus protection,
> + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
> +
> + In order to follow properly the power-up sequencing, the clocks must
> + be specified by order, adding first the BASIC clocks followed by the
> + SUSBSYS clocks.
> +
> + mediatek,infracfg:
> + $ref: /schemas/types.yaml#definitions/phandle
> + description: phandle to the device containing the INFRACFG register range.
> +
> + mediatek,smi:
> + $ref: /schemas/types.yaml#definitions/phandle
> + description: phandle to the device containing the SMI register range.
> +
> + patternProperties:
> + "^power-domain@[0-9a-f]+$":
> + type: object
> + description: |
> + Represents a power domain child within a power domain parent node.
> +
> + properties:
> +
> + '#power-domain-cells':
> + description:
> + Must be 0 for nodes representing a single PM domain and 1 for nodes
> + providing multiple PM domains.
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + A number of phandles to clocks that need to be enabled during domain
> + power-up sequencing.
> +
> + clock-names:
> + description: |
> + List of names of clocks, in order to match the power-up sequencing
> + for each power domain we need to group the clocks by name. BASIC
> + clocks need to be enabled before enabling the corresponding power
> + domain, and should not have a '-' in their name (i.e mm, mfg, venc).
> + SUSBYS clocks need to be enabled before releasing the bus protection,
> + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
> +
> + In order to follow properly the power-up sequencing, the clocks must
> + be specified by order, adding first the BASIC clocks followed by the
> + SUSBSYS clocks.
> +
> + mediatek,infracfg:
> + $ref: /schemas/types.yaml#definitions/phandle
> + description: phandle to the device containing the INFRACFG register range.
> +
> + mediatek,smi:
> + $ref: /schemas/types.yaml#definitions/phandle
> + description: phandle to the device containing the SMI register range.
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8173-clk.h>
> + #include <dt-bindings/power/mt8173-power.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + scpsys: syscon@10006000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0 0x10006000 0 0x1000>;
> +
> + spm: power-controller {
> + compatible = "mediatek,mt8173-power-controller";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #power-domain-cells = <1>;
Hi Enric and Matthias,
I'd like to know whether we could only keep this power-domain-cells
property here and make others optional, which can more directly point
out who is the real power domain provider?
> +
> + /* power domains of the SoC */
> + power-domain@MT8173_POWER_DOMAIN_VDEC {
> + reg = <MT8173_POWER_DOMAIN_VDEC>;
> + clocks = <&topckgen CLK_TOP_MM_SEL>;
> + clock-names = "mm";
> + #power-domain-cells = <0>;
> + };
> + power-domain@MT8173_POWER_DOMAIN_VENC {
> + reg = <MT8173_POWER_DOMAIN_VENC>;
> + clocks = <&topckgen CLK_TOP_MM_SEL>,
> + <&topckgen CLK_TOP_VENC_SEL>;
> + clock-names = "mm", "venc";
> + #power-domain-cells = <0>;
> + };
> + power-domain@MT8173_POWER_DOMAIN_ISP {
> + reg = <MT8173_POWER_DOMAIN_ISP>;
> + clocks = <&topckgen CLK_TOP_MM_SEL>;
> + clock-names = "mm";
> + #power-domain-cells = <0>;
> + };
> + power-domain@MT8173_POWER_DOMAIN_MM {
> + reg = <MT8173_POWER_DOMAIN_MM>;
> + clocks = <&topckgen CLK_TOP_MM_SEL>;
> + clock-names = "mm";
> + #power-domain-cells = <0>;
> + mediatek,infracfg = <&infracfg>;
> + };
> + power-domain@MT8173_POWER_DOMAIN_VENC_LT {
> + reg = <MT8173_POWER_DOMAIN_VENC_LT>;
> + clocks = <&topckgen CLK_TOP_MM_SEL>,
> + <&topckgen CLK_TOP_VENC_LT_SEL>;
> + clock-names = "mm", "venclt";
> + #power-domain-cells = <0>;
> + };
> + power-domain@MT8173_POWER_DOMAIN_AUDIO {
> + reg = <MT8173_POWER_DOMAIN_AUDIO>;
> + #power-domain-cells = <0>;
> + };
> + power-domain@MT8173_POWER_DOMAIN_USB {
> + reg = <MT8173_POWER_DOMAIN_USB>;
> + #power-domain-cells = <0>;
> + };
> + power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
> + reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
> + clocks = <&clk26m>;
> + clock-names = "mfg";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #power-domain-cells = <1>;
> +
> + power-domain@MT8173_POWER_DOMAIN_MFG_2D {
> + reg = <MT8173_POWER_DOMAIN_MFG_2D>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #power-domain-cells = <1>;
> +
> + power-domain@MT8173_POWER_DOMAIN_MFG {
> + reg = <MT8173_POWER_DOMAIN_MFG>;
> + #power-domain-cells = <0>;
> + mediatek,infracfg = <&infracfg>;
> + };
> + };
> + };
> + };
> + };
> + };
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 23+ messages in thread* Re: [PATCH v4 01/16] dt-bindings: power: Add bindings for the Mediatek SCPSYS power domains controller
2020-11-27 2:24 ` Weiyi Lu
@ 2020-11-27 8:56 ` Enric Balletbo i Serra
0 siblings, 0 replies; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-11-27 8:56 UTC (permalink / raw)
To: Weiyi Lu, Matthias Brugger
Cc: Rob Herring, drinkcat, devicetree, linux-kernel, fparent,
Rob Herring, linux-mediatek, hsinyi, matthias.bgg,
Collabora Kernel ML, linux-arm-kernel
Hi Weiyi,
On 27/11/20 3:24, Weiyi Lu wrote:
> On Fri, 2020-10-30 at 12:36 +0100, Enric Balletbo i Serra wrote:
>> The System Control Processor System (SCPSYS) has several power management
>> related tasks in the system. Add the bindings to define the power
>> domains for the SCPSYS power controller.
>>
>> Co-developed-by: Matthias Brugger <mbrugger@suse.com>
>> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> ---
>>
>> Changes in v4:
>> - Fix indentation warnings reported by yamllint
>>
>> Changes in v3:
>> - Use hex for unit-addresses.
>> - Define child nodes for nested power domains even are duplicated, but
>> more clear than adding a regex scaped to be a valid URI.
>>
>> Changes in v2:
>> - Use generic node names (power-domain).
>> - Define valid values for common properties like #power-domain-cells.
>>
>> .../power/mediatek,power-controller.yaml | 289 ++++++++++++++++++
>> 1 file changed, 289 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
>> new file mode 100644
>> index 000000000000..73b8988bd063
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
>> @@ -0,0 +1,289 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Mediatek Power Domains Controller
>> +
>> +maintainers:
>> + - Weiyi Lu <weiyi.lu@mediatek.com>
>> + - Matthias Brugger <mbrugger@suse.com>
>> +
>> +description: |
>> + Mediatek processors include support for multiple power domains which can be
>> + powered up/down by software based on different application scenes to save power.
>> +
>> + IP cores belonging to a power domain should contain a 'power-domains'
>> + property that is a phandle for SCPSYS node representing the domain.
>> +
>> +properties:
>> + $nodename:
>> + const: power-controller
>> +
>> + compatible:
>> + enum:
>> + - mediatek,mt8173-power-controller
>> +
>> + '#power-domain-cells':
>> + const: 1
>> +
>> + '#address-cells':
>> + const: 1
>> +
>> + '#size-cells':
>> + const: 0
>> +
>> +patternProperties:
>> + "^power-domain@[0-9a-f]+$":
>> + type: object
>> + description: |
>> + Represents the power domains within the power controller node as documented
>> + in Documentation/devicetree/bindings/power/power-domain.yaml.
>> +
>> + properties:
>> +
>> + '#power-domain-cells':
>> + description:
>> + Must be 0 for nodes representing a single PM domain and 1 for nodes
>> + providing multiple PM domains.
>> +
>> + '#address-cells':
>> + const: 1
>> +
>> + '#size-cells':
>> + const: 0
>> +
>> + reg:
>> + description: |
>> + Power domain index. Valid values are defined in:
>> + "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
>> + maxItems: 1
>> +
>> + clocks:
>> + description: |
>> + A number of phandles to clocks that need to be enabled during domain
>> + power-up sequencing.
>> +
>> + clock-names:
>> + description: |
>> + List of names of clocks, in order to match the power-up sequencing
>> + for each power domain we need to group the clocks by name. BASIC
>> + clocks need to be enabled before enabling the corresponding power
>> + domain, and should not have a '-' in their name (i.e mm, mfg, venc).
>> + SUSBYS clocks need to be enabled before releasing the bus protection,
>> + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
>> +
>> + In order to follow properly the power-up sequencing, the clocks must
>> + be specified by order, adding first the BASIC clocks followed by the
>> + SUSBSYS clocks.
>> +
>> + mediatek,infracfg:
>> + $ref: /schemas/types.yaml#definitions/phandle
>> + description: phandle to the device containing the INFRACFG register range.
>> +
>> + mediatek,smi:
>> + $ref: /schemas/types.yaml#definitions/phandle
>> + description: phandle to the device containing the SMI register range.
>> +
>> + patternProperties:
>> + "^power-domain@[0-9a-f]+$":
>> + type: object
>> + description: |
>> + Represents a power domain child within a power domain parent node.
>> +
>> + properties:
>> +
>> + '#power-domain-cells':
>> + description:
>> + Must be 0 for nodes representing a single PM domain and 1 for nodes
>> + providing multiple PM domains.
>> +
>> + '#address-cells':
>> + const: 1
>> +
>> + '#size-cells':
>> + const: 0
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + description: |
>> + A number of phandles to clocks that need to be enabled during domain
>> + power-up sequencing.
>> +
>> + clock-names:
>> + description: |
>> + List of names of clocks, in order to match the power-up sequencing
>> + for each power domain we need to group the clocks by name. BASIC
>> + clocks need to be enabled before enabling the corresponding power
>> + domain, and should not have a '-' in their name (i.e mm, mfg, venc).
>> + SUSBYS clocks need to be enabled before releasing the bus protection,
>> + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
>> +
>> + In order to follow properly the power-up sequencing, the clocks must
>> + be specified by order, adding first the BASIC clocks followed by the
>> + SUSBSYS clocks.
>> +
>> + mediatek,infracfg:
>> + $ref: /schemas/types.yaml#definitions/phandle
>> + description: phandle to the device containing the INFRACFG register range.
>> +
>> + mediatek,smi:
>> + $ref: /schemas/types.yaml#definitions/phandle
>> + description: phandle to the device containing the SMI register range.
>> +
>> + patternProperties:
>> + "^power-domain@[0-9a-f]+$":
>> + type: object
>> + description: |
>> + Represents a power domain child within a power domain parent node.
>> +
>> + properties:
>> +
>> + '#power-domain-cells':
>> + description:
>> + Must be 0 for nodes representing a single PM domain and 1 for nodes
>> + providing multiple PM domains.
>> +
>> + '#address-cells':
>> + const: 1
>> +
>> + '#size-cells':
>> + const: 0
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + description: |
>> + A number of phandles to clocks that need to be enabled during domain
>> + power-up sequencing.
>> +
>> + clock-names:
>> + description: |
>> + List of names of clocks, in order to match the power-up sequencing
>> + for each power domain we need to group the clocks by name. BASIC
>> + clocks need to be enabled before enabling the corresponding power
>> + domain, and should not have a '-' in their name (i.e mm, mfg, venc).
>> + SUSBYS clocks need to be enabled before releasing the bus protection,
>> + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
>> +
>> + In order to follow properly the power-up sequencing, the clocks must
>> + be specified by order, adding first the BASIC clocks followed by the
>> + SUSBSYS clocks.
>> +
>> + mediatek,infracfg:
>> + $ref: /schemas/types.yaml#definitions/phandle
>> + description: phandle to the device containing the INFRACFG register range.
>> +
>> + mediatek,smi:
>> + $ref: /schemas/types.yaml#definitions/phandle
>> + description: phandle to the device containing the SMI register range.
>> +
>> + required:
>> + - reg
>> +
>> + additionalProperties: false
>> +
>> + required:
>> + - reg
>> +
>> + additionalProperties: false
>> +
>> + required:
>> + - reg
>> +
>> + additionalProperties: false
>> +
>> +required:
>> + - compatible
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/clock/mt8173-clk.h>
>> + #include <dt-bindings/power/mt8173-power.h>
>> +
>> + soc {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + scpsys: syscon@10006000 {
>> + compatible = "syscon", "simple-mfd";
>> + reg = <0 0x10006000 0 0x1000>;
>> +
>> + spm: power-controller {
>> + compatible = "mediatek,mt8173-power-controller";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #power-domain-cells = <1>;
>
> Hi Enric and Matthias,
>
> I'd like to know whether we could only keep this power-domain-cells
> property here and make others optional, which can more directly point
> out who is the real power domain provider?
>
This is enforced by the generic power-domain binding
(Documentation/devicetree/bindings/power/power-domain.yaml) as a required
property. So, if needs to be changed, should be changed there. My understanding,
though, is that (like the binding is) this property should be required to
properly define a power-domain.
Cheers,
Enric
>> +
>> + /* power domains of the SoC */
>> + power-domain@MT8173_POWER_DOMAIN_VDEC {
>> + reg = <MT8173_POWER_DOMAIN_VDEC>;
>> + clocks = <&topckgen CLK_TOP_MM_SEL>;
>> + clock-names = "mm";
>> + #power-domain-cells = <0>;
>> + };
>> + power-domain@MT8173_POWER_DOMAIN_VENC {
>> + reg = <MT8173_POWER_DOMAIN_VENC>;
>> + clocks = <&topckgen CLK_TOP_MM_SEL>,
>> + <&topckgen CLK_TOP_VENC_SEL>;
>> + clock-names = "mm", "venc";
>> + #power-domain-cells = <0>;
>> + };
>> + power-domain@MT8173_POWER_DOMAIN_ISP {
>> + reg = <MT8173_POWER_DOMAIN_ISP>;
>> + clocks = <&topckgen CLK_TOP_MM_SEL>;
>> + clock-names = "mm";
>> + #power-domain-cells = <0>;
>> + };
>> + power-domain@MT8173_POWER_DOMAIN_MM {
>> + reg = <MT8173_POWER_DOMAIN_MM>;
>> + clocks = <&topckgen CLK_TOP_MM_SEL>;
>> + clock-names = "mm";
>> + #power-domain-cells = <0>;
>> + mediatek,infracfg = <&infracfg>;
>> + };
>> + power-domain@MT8173_POWER_DOMAIN_VENC_LT {
>> + reg = <MT8173_POWER_DOMAIN_VENC_LT>;
>> + clocks = <&topckgen CLK_TOP_MM_SEL>,
>> + <&topckgen CLK_TOP_VENC_LT_SEL>;
>> + clock-names = "mm", "venclt";
>> + #power-domain-cells = <0>;
>> + };
>> + power-domain@MT8173_POWER_DOMAIN_AUDIO {
>> + reg = <MT8173_POWER_DOMAIN_AUDIO>;
>> + #power-domain-cells = <0>;
>> + };
>> + power-domain@MT8173_POWER_DOMAIN_USB {
>> + reg = <MT8173_POWER_DOMAIN_USB>;
>> + #power-domain-cells = <0>;
>> + };
>> + power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
>> + reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
>> + clocks = <&clk26m>;
>> + clock-names = "mfg";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #power-domain-cells = <1>;
>> +
>> + power-domain@MT8173_POWER_DOMAIN_MFG_2D {
>> + reg = <MT8173_POWER_DOMAIN_MFG_2D>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #power-domain-cells = <1>;
>> +
>> + power-domain@MT8173_POWER_DOMAIN_MFG {
>> + reg = <MT8173_POWER_DOMAIN_MFG>;
>> + #power-domain-cells = <0>;
>> + mediatek,infracfg = <&infracfg>;
>> + };
>> + };
>> + };
>> + };
>> + };
>> + };
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v4 02/16] soc: mediatek: Add MediaTek SCPSYS power domains
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
2020-10-30 11:36 ` [PATCH v4 01/16] dt-bindings: power: Add bindings for the Mediatek " Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-10-30 11:36 ` [PATCH v4 03/16] arm64: dts: mediatek: Add mt8173 power domain controller Enric Balletbo i Serra
` (14 subsequent siblings)
16 siblings, 0 replies; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: drinkcat, weiyi.lu, fparent, Matthias Brugger, linux-mediatek,
hsinyi, matthias.bgg, Collabora Kernel ML, linux-arm-kernel
The System Control Processor System (SCPSYS) has several power management
related tasks in the system. This driver implements support to handle
the different power domains supported in order to meet high performance
and low power requirements.
Co-developed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v4:
- Use a boolean for scpsys_domain_is_on().
- Disable the SRAM in the scpsys_power_on() error path.
- Use the regmap_[clear|set]_bits helpers.
- Use the new syscon_regmap_lookup_by_phandle_optional() helper.
- Rename domains variable from scpsys_soc_data struct to avoid
confusions.
- Check that domain data sta_mask is set.
Changes in v3:
- Return only a boolean for scpsys_domain_is_on()
- Use regmap_update_bits API when possible.
- Add some logic to make sure scpsys->domains[id] == NULL or != NULL
when needed.
- Return the child node for scpsys_add_one_domain() call.
- Remove unneded zeroing num_clks variable.
- Move the soc specific data to separate include files.
Changes in v2:
- Get base address from parent syscon. We have now a scpsys syscon node
and a child for the SPM (System Power Manager).
- Use regmap API to acces de base address.
drivers/soc/mediatek/Kconfig | 13 +
drivers/soc/mediatek/Makefile | 1 +
drivers/soc/mediatek/mt8173-pm-domains.h | 96 +++++
drivers/soc/mediatek/mtk-pm-domains.c | 456 +++++++++++++++++++++++
drivers/soc/mediatek/mtk-pm-domains.h | 65 ++++
5 files changed, 631 insertions(+)
create mode 100644 drivers/soc/mediatek/mt8173-pm-domains.h
create mode 100644 drivers/soc/mediatek/mtk-pm-domains.c
create mode 100644 drivers/soc/mediatek/mtk-pm-domains.h
diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
index 59a56cd790ec..68d800f9e4a5 100644
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -44,6 +44,19 @@ config MTK_SCPSYS
Say yes here to add support for the MediaTek SCPSYS power domain
driver.
+config MTK_SCPSYS_PM_DOMAINS
+ bool "MediaTek SCPSYS generic power domain"
+ default ARCH_MEDIATEK
+ depends on PM
+ depends on MTK_INFRACFG
+ select PM_GENERIC_DOMAINS
+ select REGMAP
+ help
+ Say y here to enable power domain support.
+ In order to meet high performance and low power requirements, the System
+ Control Processor System (SCPSYS) has several power management related
+ tasks in the system.
+
config MTK_MMSYS
bool "MediaTek MMSYS Support"
default ARCH_MEDIATEK
diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
index 069625c118c2..905b4faa624d 100644
--- a/drivers/soc/mediatek/Makefile
+++ b/drivers/soc/mediatek/Makefile
@@ -3,5 +3,6 @@ obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
+obj-$(CONFIG_MTK_SCPSYS_PM_DOMAINS) += mtk-pm-domains.o
obj-$(CONFIG_MTK_MMSYS) += mtk-mmsys.o
obj-$(CONFIG_MTK_MMSYS) += mmsys/
diff --git a/drivers/soc/mediatek/mt8173-pm-domains.h b/drivers/soc/mediatek/mt8173-pm-domains.h
new file mode 100644
index 000000000000..5f2b5d4ad02b
--- /dev/null
+++ b/drivers/soc/mediatek/mt8173-pm-domains.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __SOC_MEDIATEK_MT8173_PM_DOMAINS_H
+#define __SOC_MEDIATEK_MT8173_PM_DOMAINS_H
+
+#include "mtk-pm-domains.h"
+#include <dt-bindings/power/mt8173-power.h>
+
+/*
+ * MT8173 power domain support
+ */
+
+static const struct scpsys_domain_data scpsys_domain_data_mt8173[] = {
+ [MT8173_POWER_DOMAIN_VDEC] = {
+ .sta_mask = PWR_STATUS_VDEC,
+ .ctl_offs = SPM_VDE_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ },
+ [MT8173_POWER_DOMAIN_VENC] = {
+ .sta_mask = PWR_STATUS_VENC,
+ .ctl_offs = SPM_VEN_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ },
+ [MT8173_POWER_DOMAIN_ISP] = {
+ .sta_mask = PWR_STATUS_ISP,
+ .ctl_offs = SPM_ISP_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(13, 12),
+ },
+ [MT8173_POWER_DOMAIN_MM] = {
+ .sta_mask = PWR_STATUS_DISP,
+ .ctl_offs = SPM_DIS_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_infracfg = {
+ .bus_prot_reg_update = true,
+ .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MM_M0 |
+ MT8173_TOP_AXI_PROT_EN_MM_M1,
+ },
+ },
+ [MT8173_POWER_DOMAIN_VENC_LT] = {
+ .sta_mask = PWR_STATUS_VENC_LT,
+ .ctl_offs = SPM_VEN2_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ },
+ [MT8173_POWER_DOMAIN_AUDIO] = {
+ .sta_mask = PWR_STATUS_AUDIO,
+ .ctl_offs = SPM_AUDIO_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ },
+ [MT8173_POWER_DOMAIN_USB] = {
+ .sta_mask = PWR_STATUS_USB,
+ .ctl_offs = SPM_USB_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ .caps = MTK_SCPD_ACTIVE_WAKEUP,
+ },
+ [MT8173_POWER_DOMAIN_MFG_ASYNC] = {
+ .sta_mask = PWR_STATUS_MFG_ASYNC,
+ .ctl_offs = SPM_MFG_ASYNC_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = 0,
+ },
+ [MT8173_POWER_DOMAIN_MFG_2D] = {
+ .sta_mask = PWR_STATUS_MFG_2D,
+ .ctl_offs = SPM_MFG_2D_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(13, 12),
+ },
+ [MT8173_POWER_DOMAIN_MFG] = {
+ .sta_mask = PWR_STATUS_MFG,
+ .ctl_offs = SPM_MFG_PWR_CON,
+ .sram_pdn_bits = GENMASK(13, 8),
+ .sram_pdn_ack_bits = GENMASK(21, 16),
+ .bp_infracfg = {
+ .bus_prot_reg_update = true,
+ .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MFG_S |
+ MT8173_TOP_AXI_PROT_EN_MFG_M0 |
+ MT8173_TOP_AXI_PROT_EN_MFG_M1 |
+ MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT,
+ },
+ },
+};
+
+static const struct scpsys_soc_data mt8173_scpsys_data = {
+ .domains_data = scpsys_domain_data_mt8173,
+ .num_domains = ARRAY_SIZE(scpsys_domain_data_mt8173),
+ .pwr_sta_offs = SPM_PWR_STATUS,
+ .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND,
+};
+
+#endif /* __SOC_MEDIATEK_MT8173_PM_DOMAINS_H */
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
new file mode 100644
index 000000000000..f8e88308f2e0
--- /dev/null
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 Collabora Ltd.
+ */
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_clk.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/regmap.h>
+#include <linux/soc/mediatek/infracfg.h>
+
+#include "mt8173-pm-domains.h"
+
+#define MTK_POLL_DELAY_US 10
+#define MTK_POLL_TIMEOUT USEC_PER_SEC
+
+#define PWR_RST_B_BIT BIT(0)
+#define PWR_ISO_BIT BIT(1)
+#define PWR_ON_BIT BIT(2)
+#define PWR_ON_2ND_BIT BIT(3)
+#define PWR_CLK_DIS_BIT BIT(4)
+
+struct scpsys_domain {
+ struct generic_pm_domain genpd;
+ const struct scpsys_domain_data *data;
+ struct scpsys *scpsys;
+ int num_clks;
+ struct clk_bulk_data *clks;
+ struct regmap *infracfg;
+};
+
+struct scpsys {
+ struct device *dev;
+ struct regmap *base;
+ const struct scpsys_soc_data *soc_data;
+ struct genpd_onecell_data pd_data;
+ struct generic_pm_domain *domains[];
+};
+
+#define to_scpsys_domain(gpd) container_of(gpd, struct scpsys_domain, genpd)
+
+static bool scpsys_domain_is_on(struct scpsys_domain *pd)
+{
+ struct scpsys *scpsys = pd->scpsys;
+ u32 status, status2;
+
+ regmap_read(scpsys->base, scpsys->soc_data->pwr_sta_offs, &status);
+ status &= pd->data->sta_mask;
+
+ regmap_read(scpsys->base, scpsys->soc_data->pwr_sta2nd_offs, &status2);
+ status2 &= pd->data->sta_mask;
+
+ /* A domain is on when both status bits are set. */
+ return status && status2;
+}
+
+static int scpsys_sram_enable(struct scpsys_domain *pd)
+{
+ u32 pdn_ack = pd->data->sram_pdn_ack_bits;
+ struct scpsys *scpsys = pd->scpsys;
+ unsigned int tmp;
+
+ regmap_clear_bits(scpsys->base, pd->data->ctl_offs, pd->data->sram_pdn_bits);
+
+ /* Either wait until SRAM_PDN_ACK all 1 or 0 */
+ return regmap_read_poll_timeout(scpsys->base, pd->data->ctl_offs, tmp,
+ (tmp & pdn_ack) == 0, MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+}
+
+static int scpsys_sram_disable(struct scpsys_domain *pd)
+{
+ u32 pdn_ack = pd->data->sram_pdn_ack_bits;
+ struct scpsys *scpsys = pd->scpsys;
+ unsigned int tmp;
+
+ regmap_set_bits(scpsys->base, pd->data->ctl_offs, pd->data->sram_pdn_bits);
+
+ /* Either wait until SRAM_PDN_ACK all 1 or 0 */
+ return regmap_read_poll_timeout(scpsys->base, pd->data->ctl_offs, tmp,
+ (tmp & pdn_ack) == pdn_ack, MTK_POLL_DELAY_US,
+ MTK_POLL_TIMEOUT);
+}
+
+static int scpsys_bus_protect_enable(struct scpsys_domain *pd)
+{
+ const struct scpsys_bus_prot_data *bp_data = &pd->data->bp_infracfg;
+
+ if (!bp_data->bus_prot_mask)
+ return 0;
+
+ return mtk_infracfg_set_bus_protection(pd->infracfg, bp_data->bus_prot_mask,
+ bp_data->bus_prot_reg_update);
+}
+
+static int scpsys_bus_protect_disable(struct scpsys_domain *pd)
+{
+ const struct scpsys_bus_prot_data *bp_data = &pd->data->bp_infracfg;
+
+ if (!bp_data->bus_prot_mask)
+ return 0;
+
+ return mtk_infracfg_clear_bus_protection(pd->infracfg, bp_data->bus_prot_mask,
+ bp_data->bus_prot_reg_update);
+}
+
+static int scpsys_power_on(struct generic_pm_domain *genpd)
+{
+ struct scpsys_domain *pd = container_of(genpd, struct scpsys_domain, genpd);
+ struct scpsys *scpsys = pd->scpsys;
+ bool tmp;
+ int ret;
+
+ ret = clk_bulk_enable(pd->num_clks, pd->clks);
+ if (ret)
+ return ret;
+
+ /* subsys power on */
+ regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_ON_BIT);
+ regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_ON_2ND_BIT);
+
+ /* wait until PWR_ACK = 1 */
+ ret = readx_poll_timeout(scpsys_domain_is_on, pd, tmp, tmp, MTK_POLL_DELAY_US,
+ MTK_POLL_TIMEOUT);
+ if (ret < 0)
+ goto err_pwr_ack;
+
+ regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_CLK_DIS_BIT);
+ regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_ISO_BIT);
+ regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_RST_B_BIT);
+
+ ret = scpsys_sram_enable(pd);
+ if (ret < 0)
+ goto err_pwr_ack;
+
+ ret = scpsys_bus_protect_disable(pd);
+ if (ret < 0)
+ goto err_disable_sram;
+
+ return 0;
+
+err_disable_sram:
+ scpsys_sram_disable(pd);
+err_pwr_ack:
+ clk_bulk_disable(pd->num_clks, pd->clks);
+ return ret;
+}
+
+static int scpsys_power_off(struct generic_pm_domain *genpd)
+{
+ struct scpsys_domain *pd = container_of(genpd, struct scpsys_domain, genpd);
+ struct scpsys *scpsys = pd->scpsys;
+ bool tmp;
+ int ret;
+
+ ret = scpsys_bus_protect_enable(pd);
+ if (ret < 0)
+ return ret;
+
+ ret = scpsys_sram_disable(pd);
+ if (ret < 0)
+ return ret;
+
+ /* subsys power off */
+ regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_RST_B_BIT);
+ regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_ISO_BIT);
+ regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_CLK_DIS_BIT);
+ regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_ON_2ND_BIT);
+ regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_ON_BIT);
+
+ /* wait until PWR_ACK = 0 */
+ ret = readx_poll_timeout(scpsys_domain_is_on, pd, tmp, !tmp, MTK_POLL_DELAY_US,
+ MTK_POLL_TIMEOUT);
+ if (ret < 0)
+ return ret;
+
+ clk_bulk_disable(pd->num_clks, pd->clks);
+
+ return 0;
+}
+
+static struct
+generic_pm_domain *scpsys_add_one_domain(struct scpsys *scpsys, struct device_node *node)
+{
+ const struct scpsys_domain_data *domain_data;
+ struct scpsys_domain *pd;
+ int i, ret;
+ u32 id;
+
+ ret = of_property_read_u32(node, "reg", &id);
+ if (ret) {
+ dev_err(scpsys->dev, "%pOF: failed to retrieve domain id from reg: %d\n",
+ node, ret);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (id >= scpsys->soc_data->num_domains) {
+ dev_err(scpsys->dev, "%pOF: invalid domain id %d\n", node, id);
+ return ERR_PTR(-EINVAL);
+ }
+
+ domain_data = &scpsys->soc_data->domains_data[id];
+ if (domain_data->sta_mask == 0) {
+ dev_err(scpsys->dev, "%pOF: undefined domain id %d\n", node, id);
+ return ERR_PTR(-EINVAL);
+ }
+
+ pd = devm_kzalloc(scpsys->dev, sizeof(*pd), GFP_KERNEL);
+ if (!pd)
+ return ERR_PTR(-ENOMEM);
+
+ pd->data = domain_data;
+ pd->scpsys = scpsys;
+
+ pd->infracfg = syscon_regmap_lookup_by_phandle_optional(node, "mediatek,infracfg");
+ if (IS_ERR(pd->infracfg))
+ return ERR_CAST(pd->infracfg);
+
+ pd->num_clks = of_clk_get_parent_count(node);
+ if (pd->num_clks > 0) {
+ pd->clks = devm_kcalloc(scpsys->dev, pd->num_clks, sizeof(*pd->clks), GFP_KERNEL);
+ if (!pd->clks)
+ return ERR_PTR(-ENOMEM);
+ }
+
+ for (i = 0; i < pd->num_clks; i++) {
+ pd->clks[i].clk = of_clk_get(node, i);
+ if (IS_ERR(pd->clks[i].clk)) {
+ dev_err(scpsys->dev, "%pOF: failed to get clk at index %d\n",
+ node, i);
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
+ ret = clk_bulk_prepare(pd->num_clks, pd->clks);
+ if (ret)
+ goto err_put_clocks;
+
+ /*
+ * Initially turn on all domains to make the domains usable
+ * with !CONFIG_PM and to get the hardware in sync with the
+ * software. The unused domains will be switched off during
+ * late_init time.
+ */
+ ret = scpsys_power_on(&pd->genpd);
+ if (ret < 0) {
+ dev_err(scpsys->dev, "%pOF: failed to power on domain: %d\n", node, ret);
+ goto err_unprepare_clocks;
+ }
+
+ if (scpsys->domains[id]) {
+ ret = -EINVAL;
+ dev_err(scpsys->dev,
+ "power domain with id %d already exists, check your device-tree\n", id);
+ goto err_unprepare_clocks;
+ }
+
+ pd->genpd.name = node->name;
+ pd->genpd.power_off = scpsys_power_off;
+ pd->genpd.power_on = scpsys_power_on;
+
+ pm_genpd_init(&pd->genpd, NULL, false);
+ scpsys->domains[id] = &pd->genpd;
+
+ return scpsys->pd_data.domains[id];
+
+err_unprepare_clocks:
+ clk_bulk_unprepare(pd->num_clks, pd->clks);
+err_put_clocks:
+ clk_bulk_put(pd->num_clks, pd->clks);
+ return ERR_PTR(ret);
+}
+
+static int scpsys_add_subdomain(struct scpsys *scpsys, struct device_node *parent)
+{
+ struct generic_pm_domain *child_pd, *parent_pd;
+ struct device_node *child;
+ int ret;
+
+ for_each_child_of_node(parent, child) {
+ u32 id;
+
+ ret = of_property_read_u32(parent, "reg", &id);
+ if (ret) {
+ dev_err(scpsys->dev, "%pOF: failed to get parent domain id\n", child);
+ goto err_put_node;
+ }
+
+ if (!scpsys->pd_data.domains[id]) {
+ ret = -EINVAL;
+ dev_err(scpsys->dev, "power domain with id %d does not exist\n", id);
+ goto err_put_node;
+ }
+
+ parent_pd = scpsys->pd_data.domains[id];
+
+ child_pd = scpsys_add_one_domain(scpsys, child);
+ if (IS_ERR(child_pd)) {
+ ret = PTR_ERR(child_pd);
+ dev_err(scpsys->dev, "%pOF: failed to get child domain id\n", child);
+ goto err_put_node;
+ }
+
+ ret = pm_genpd_add_subdomain(parent_pd, child_pd);
+ if (ret) {
+ dev_err(scpsys->dev, "failed to add %s subdomain to parent %s\n",
+ child_pd->name, parent_pd->name);
+ goto err_put_node;
+ } else {
+ dev_dbg(scpsys->dev, "%s add subdomain: %s\n", parent_pd->name,
+ child_pd->name);
+ }
+
+ /* recursive call to add all subdomains */
+ ret = scpsys_add_subdomain(scpsys, child);
+ if (ret)
+ goto err_put_node;
+ }
+
+ return 0;
+
+err_put_node:
+ of_node_put(child);
+ return ret;
+}
+
+static void scpsys_remove_one_domain(struct scpsys_domain *pd)
+{
+ int ret;
+
+ /*
+ * We're in the error cleanup already, so we only complain,
+ * but won't emit another error on top of the original one.
+ */
+ ret = pm_genpd_remove(&pd->genpd);
+ if (ret < 0)
+ dev_err(pd->scpsys->dev,
+ "failed to remove domain '%s' : %d - state may be inconsistent\n",
+ pd->genpd.name, ret);
+
+ scpsys_power_off(&pd->genpd);
+
+ clk_bulk_unprepare(pd->num_clks, pd->clks);
+ clk_bulk_put(pd->num_clks, pd->clks);
+}
+
+static void scpsys_domain_cleanup(struct scpsys *scpsys)
+{
+ struct generic_pm_domain *genpd;
+ struct scpsys_domain *pd;
+ int i;
+
+ for (i = scpsys->pd_data.num_domains - 1; i >= 0; i--) {
+ genpd = scpsys->pd_data.domains[i];
+ if (genpd) {
+ pd = to_scpsys_domain(genpd);
+ scpsys_remove_one_domain(pd);
+ }
+ }
+}
+
+static const struct of_device_id scpsys_of_match[] = {
+ {
+ .compatible = "mediatek,mt8173-power-controller",
+ .data = &mt8173_scpsys_data,
+ },
+ { }
+};
+
+static int scpsys_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ const struct scpsys_soc_data *soc;
+ struct device_node *node;
+ struct device *parent;
+ struct scpsys *scpsys;
+ int ret;
+
+ soc = of_device_get_match_data(&pdev->dev);
+ if (!soc) {
+ dev_err(&pdev->dev, "no power controller data\n");
+ return -EINVAL;
+ }
+
+ scpsys = devm_kzalloc(dev, struct_size(scpsys, domains, soc->num_domains), GFP_KERNEL);
+ if (!scpsys)
+ return -ENOMEM;
+
+ scpsys->dev = dev;
+ scpsys->soc_data = soc;
+
+ scpsys->pd_data.domains = scpsys->domains;
+ scpsys->pd_data.num_domains = soc->num_domains;
+
+ parent = dev->parent;
+ if (!parent) {
+ dev_err(dev, "no parent for syscon devices\n");
+ return -ENODEV;
+ }
+
+ scpsys->base = syscon_node_to_regmap(parent->of_node);
+ if (IS_ERR(scpsys->base)) {
+ dev_err(dev, "no regmap available\n");
+ return PTR_ERR(scpsys->base);
+ }
+
+ ret = -ENODEV;
+ for_each_available_child_of_node(np, node) {
+ struct generic_pm_domain *domain;
+
+ domain = scpsys_add_one_domain(scpsys, node);
+ if (IS_ERR(domain)) {
+ ret = PTR_ERR(domain);
+ of_node_put(node);
+ goto err_cleanup_domains;
+ }
+
+ ret = scpsys_add_subdomain(scpsys, node);
+ if (ret) {
+ of_node_put(node);
+ goto err_cleanup_domains;
+ }
+ }
+
+ if (ret) {
+ dev_dbg(dev, "no power domains present\n");
+ return ret;
+ }
+
+ ret = of_genpd_add_provider_onecell(np, &scpsys->pd_data);
+ if (ret) {
+ dev_err(dev, "failed to add provider: %d\n", ret);
+ goto err_cleanup_domains;
+ }
+
+ return 0;
+
+err_cleanup_domains:
+ scpsys_domain_cleanup(scpsys);
+ return ret;
+}
+
+static struct platform_driver scpsys_pm_domain_driver = {
+ .probe = scpsys_probe,
+ .driver = {
+ .name = "mtk-power-controller",
+ .suppress_bind_attrs = true,
+ .of_match_table = scpsys_of_match,
+ },
+};
+builtin_platform_driver(scpsys_pm_domain_driver);
diff --git a/drivers/soc/mediatek/mtk-pm-domains.h b/drivers/soc/mediatek/mtk-pm-domains.h
new file mode 100644
index 000000000000..7c479021d404
--- /dev/null
+++ b/drivers/soc/mediatek/mtk-pm-domains.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __SOC_MEDIATEK_MTK_PM_DOMAINS_H
+#define __SOC_MEDIATEK_MTK_PM_DOMAINS_H
+
+#define MTK_SCPD_ACTIVE_WAKEUP BIT(0)
+#define MTK_SCPD_FWAIT_SRAM BIT(1)
+#define MTK_SCPD_CAPS(_scpd, _x) ((_scpd)->data->caps & (_x))
+
+#define SPM_VDE_PWR_CON 0x0210
+#define SPM_MFG_PWR_CON 0x0214
+#define SPM_VEN_PWR_CON 0x0230
+#define SPM_ISP_PWR_CON 0x0238
+#define SPM_DIS_PWR_CON 0x023c
+#define SPM_VEN2_PWR_CON 0x0298
+#define SPM_AUDIO_PWR_CON 0x029c
+#define SPM_MFG_2D_PWR_CON 0x02c0
+#define SPM_MFG_ASYNC_PWR_CON 0x02c4
+#define SPM_USB_PWR_CON 0x02cc
+
+#define SPM_PWR_STATUS 0x060c
+#define SPM_PWR_STATUS_2ND 0x0610
+
+#define PWR_STATUS_DISP BIT(3)
+#define PWR_STATUS_MFG BIT(4)
+#define PWR_STATUS_ISP BIT(5)
+#define PWR_STATUS_VDEC BIT(7)
+#define PWR_STATUS_VENC_LT BIT(20)
+#define PWR_STATUS_VENC BIT(21)
+#define PWR_STATUS_MFG_2D BIT(22)
+#define PWR_STATUS_MFG_ASYNC BIT(23)
+#define PWR_STATUS_AUDIO BIT(24)
+#define PWR_STATUS_USB BIT(25)
+
+struct scpsys_bus_prot_data {
+ u32 bus_prot_mask;
+ bool bus_prot_reg_update;
+};
+
+/**
+ * struct scpsys_domain_data - scp domain data for power on/off flow
+ * @sta_mask: The mask for power on/off status bit.
+ * @ctl_offs: The offset for main power control register.
+ * @sram_pdn_bits: The mask for sram power control bits.
+ * @sram_pdn_ack_bits: The mask for sram power control acked bits.
+ * @caps: The flag for active wake-up action.
+ * @bp_infracfg: bus protection for infracfg subsystem
+ */
+struct scpsys_domain_data {
+ u32 sta_mask;
+ int ctl_offs;
+ u32 sram_pdn_bits;
+ u32 sram_pdn_ack_bits;
+ u8 caps;
+ const struct scpsys_bus_prot_data bp_infracfg;
+};
+
+struct scpsys_soc_data {
+ const struct scpsys_domain_data *domains_data;
+ int num_domains;
+ int pwr_sta_offs;
+ int pwr_sta2nd_offs;
+};
+
+#endif /* __SOC_MEDIATEK_MTK_PM_DOMAINS_H */
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH v4 03/16] arm64: dts: mediatek: Add mt8173 power domain controller
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
2020-10-30 11:36 ` [PATCH v4 01/16] dt-bindings: power: Add bindings for the Mediatek " Enric Balletbo i Serra
2020-10-30 11:36 ` [PATCH v4 02/16] soc: mediatek: Add MediaTek SCPSYS power domains Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-10-30 11:36 ` [PATCH v4 04/16] soc: mediatek: pm-domains: Add bus protection protocol Enric Balletbo i Serra
` (13 subsequent siblings)
16 siblings, 0 replies; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: devicetree, drinkcat, weiyi.lu, fparent, Rob Herring,
linux-mediatek, hsinyi, matthias.bgg, Collabora Kernel ML,
linux-arm-kernel
Add power domain controller node for SoC mt8173.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- Add a scpsys syscon node as parent and a SPM (System Power Manager) as
a child.
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 164 ++++++++++++++++-------
1 file changed, 115 insertions(+), 49 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 5e046f9d48ce..7fa870e4386a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -450,16 +450,82 @@ pins1 {
};
};
- scpsys: power-controller@10006000 {
- compatible = "mediatek,mt8173-scpsys";
- #power-domain-cells = <1>;
+ scpsys: syscon@10006000 {
+ compatible = "syscon", "simple-mfd";
reg = <0 0x10006000 0 0x1000>;
- clocks = <&clk26m>,
- <&topckgen CLK_TOP_MM_SEL>,
- <&topckgen CLK_TOP_VENC_SEL>,
- <&topckgen CLK_TOP_VENC_LT_SEL>;
- clock-names = "mfg", "mm", "venc", "venc_lt";
- infracfg = <&infracfg>;
+ #power-domain-cells = <1>;
+
+ /* System Power Manager */
+ spm: power-controller {
+ compatible = "mediatek,mt8173-power-controller";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ /* power domains of the SoC */
+ power-domain@MT8173_POWER_DOMAIN_VDEC {
+ reg = <MT8173_POWER_DOMAIN_VDEC>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>;
+ clock-names = "mm";
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_VENC {
+ reg = <MT8173_POWER_DOMAIN_VENC>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>,
+ <&topckgen CLK_TOP_VENC_SEL>;
+ clock-names = "mm", "venc";
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_ISP {
+ reg = <MT8173_POWER_DOMAIN_ISP>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>;
+ clock-names = "mm";
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_MM {
+ reg = <MT8173_POWER_DOMAIN_MM>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>;
+ clock-names = "mm";
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_VENC_LT {
+ reg = <MT8173_POWER_DOMAIN_VENC_LT>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>,
+ <&topckgen CLK_TOP_VENC_LT_SEL>;
+ clock-names = "mm", "venclt";
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_AUDIO {
+ reg = <MT8173_POWER_DOMAIN_AUDIO>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_USB {
+ reg = <MT8173_POWER_DOMAIN_USB>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
+ reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
+ clocks = <&clk26m>;
+ clock-names = "mfg";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ power-domain@MT8173_POWER_DOMAIN_MFG_2D {
+ reg = <MT8173_POWER_DOMAIN_MFG_2D>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ power-domain@MT8173_POWER_DOMAIN_MFG {
+ reg = <MT8173_POWER_DOMAIN_MFG>;
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ };
+ };
+ };
+ };
};
watchdog: watchdog@10007000 {
@@ -792,7 +858,7 @@ afe: audio-controller@11220000 {
compatible = "mediatek,mt8173-afe-pcm";
reg = <0 0x11220000 0 0x1000>;
interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_FALLING>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_AUDIO>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_AUDIO>;
clocks = <&infracfg CLK_INFRA_AUDIO>,
<&topckgen CLK_TOP_AUDIO_SEL>,
<&topckgen CLK_TOP_AUD_INTBUS_SEL>,
@@ -868,7 +934,7 @@ ssusb: usb@11271000 {
phys = <&u2port0 PHY_TYPE_USB2>,
<&u3port0 PHY_TYPE_USB3>,
<&u2port1 PHY_TYPE_USB2>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_USB>;
clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
clock-names = "sys_ck", "ref_ck";
mediatek,syscon-wakeup = <&pericfg 0x400 1>;
@@ -882,7 +948,7 @@ usb_host: xhci@11270000 {
reg = <0 0x11270000 0 0x1000>;
reg-names = "mac";
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_USB>;
clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
clock-names = "sys_ck", "ref_ck";
status = "disabled";
@@ -925,7 +991,7 @@ u2port1: usb-phy@11291000 {
mmsys: syscon@14000000 {
compatible = "mediatek,mt8173-mmsys", "syscon";
reg = <0 0x14000000 0 0x1000>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
assigned-clock-rates = <400000000>;
#clock-cells = <1>;
@@ -940,7 +1006,7 @@ mdp_rdma0: rdma@14001000 {
reg = <0 0x14001000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_RDMA0>,
<&mmsys CLK_MM_MUTEX_32K>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA0>;
mediatek,larb = <&larb0>;
mediatek,vpu = <&vpu>;
@@ -951,7 +1017,7 @@ mdp_rdma1: rdma@14002000 {
reg = <0 0x14002000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_RDMA1>,
<&mmsys CLK_MM_MUTEX_32K>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA1>;
mediatek,larb = <&larb4>;
};
@@ -960,28 +1026,28 @@ mdp_rsz0: rsz@14003000 {
compatible = "mediatek,mt8173-mdp-rsz";
reg = <0 0x14003000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_RSZ0>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
};
mdp_rsz1: rsz@14004000 {
compatible = "mediatek,mt8173-mdp-rsz";
reg = <0 0x14004000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_RSZ1>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
};
mdp_rsz2: rsz@14005000 {
compatible = "mediatek,mt8173-mdp-rsz";
reg = <0 0x14005000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_RSZ2>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
};
mdp_wdma0: wdma@14006000 {
compatible = "mediatek,mt8173-mdp-wdma";
reg = <0 0x14006000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_WDMA>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WDMA>;
mediatek,larb = <&larb0>;
};
@@ -990,7 +1056,7 @@ mdp_wrot0: wrot@14007000 {
compatible = "mediatek,mt8173-mdp-wrot";
reg = <0 0x14007000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_WROT0>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT0>;
mediatek,larb = <&larb0>;
};
@@ -999,7 +1065,7 @@ mdp_wrot1: wrot@14008000 {
compatible = "mediatek,mt8173-mdp-wrot";
reg = <0 0x14008000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_WROT1>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT1>;
mediatek,larb = <&larb4>;
};
@@ -1008,7 +1074,7 @@ ovl0: ovl@1400c000 {
compatible = "mediatek,mt8173-disp-ovl";
reg = <0 0x1400c000 0 0x1000>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL0>;
iommus = <&iommu M4U_PORT_DISP_OVL0>;
mediatek,larb = <&larb0>;
@@ -1019,7 +1085,7 @@ ovl1: ovl@1400d000 {
compatible = "mediatek,mt8173-disp-ovl";
reg = <0 0x1400d000 0 0x1000>;
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL1>;
iommus = <&iommu M4U_PORT_DISP_OVL1>;
mediatek,larb = <&larb4>;
@@ -1030,7 +1096,7 @@ rdma0: rdma@1400e000 {
compatible = "mediatek,mt8173-disp-rdma";
reg = <0 0x1400e000 0 0x1000>;
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
iommus = <&iommu M4U_PORT_DISP_RDMA0>;
mediatek,larb = <&larb0>;
@@ -1041,7 +1107,7 @@ rdma1: rdma@1400f000 {
compatible = "mediatek,mt8173-disp-rdma";
reg = <0 0x1400f000 0 0x1000>;
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
iommus = <&iommu M4U_PORT_DISP_RDMA1>;
mediatek,larb = <&larb4>;
@@ -1052,7 +1118,7 @@ rdma2: rdma@14010000 {
compatible = "mediatek,mt8173-disp-rdma";
reg = <0 0x14010000 0 0x1000>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA2>;
iommus = <&iommu M4U_PORT_DISP_RDMA2>;
mediatek,larb = <&larb4>;
@@ -1063,7 +1129,7 @@ wdma0: wdma@14011000 {
compatible = "mediatek,mt8173-disp-wdma";
reg = <0 0x14011000 0 0x1000>;
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA0>;
iommus = <&iommu M4U_PORT_DISP_WDMA0>;
mediatek,larb = <&larb0>;
@@ -1074,7 +1140,7 @@ wdma1: wdma@14012000 {
compatible = "mediatek,mt8173-disp-wdma";
reg = <0 0x14012000 0 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA1>;
iommus = <&iommu M4U_PORT_DISP_WDMA1>;
mediatek,larb = <&larb4>;
@@ -1085,7 +1151,7 @@ color0: color@14013000 {
compatible = "mediatek,mt8173-disp-color";
reg = <0 0x14013000 0 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_COLOR0>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>;
};
@@ -1094,7 +1160,7 @@ color1: color@14014000 {
compatible = "mediatek,mt8173-disp-color";
reg = <0 0x14014000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_COLOR1>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x4000 0x1000>;
};
@@ -1103,7 +1169,7 @@ aal@14015000 {
compatible = "mediatek,mt8173-disp-aal";
reg = <0 0x14015000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_AAL>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
};
@@ -1112,7 +1178,7 @@ gamma@14016000 {
compatible = "mediatek,mt8173-disp-gamma";
reg = <0 0x14016000 0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_GAMMA>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
};
@@ -1120,21 +1186,21 @@ gamma@14016000 {
merge@14017000 {
compatible = "mediatek,mt8173-disp-merge";
reg = <0 0x14017000 0 0x1000>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_MERGE>;
};
split0: split@14018000 {
compatible = "mediatek,mt8173-disp-split";
reg = <0 0x14018000 0 0x1000>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
};
split1: split@14019000 {
compatible = "mediatek,mt8173-disp-split";
reg = <0 0x14019000 0 0x1000>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_SPLIT1>;
};
@@ -1142,7 +1208,7 @@ ufoe@1401a000 {
compatible = "mediatek,mt8173-disp-ufoe";
reg = <0 0x1401a000 0 0x1000>;
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_UFOE>;
};
@@ -1150,7 +1216,7 @@ dsi0: dsi@1401b000 {
compatible = "mediatek,mt8173-dsi";
reg = <0 0x1401b000 0 0x1000>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DSI0_ENGINE>,
<&mmsys CLK_MM_DSI0_DIGITAL>,
<&mipi_tx0>;
@@ -1164,7 +1230,7 @@ dsi1: dsi@1401c000 {
compatible = "mediatek,mt8173-dsi";
reg = <0 0x1401c000 0 0x1000>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DSI1_ENGINE>,
<&mmsys CLK_MM_DSI1_DIGITAL>,
<&mipi_tx1>;
@@ -1178,7 +1244,7 @@ dpi0: dpi@1401d000 {
compatible = "mediatek,mt8173-dpi";
reg = <0 0x1401d000 0 0x1000>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DPI_PIXEL>,
<&mmsys CLK_MM_DPI_ENGINE>,
<&apmixedsys CLK_APMIXED_TVDPLL>;
@@ -1218,7 +1284,7 @@ mutex: mutex@14020000 {
compatible = "mediatek,mt8173-disp-mutex";
reg = <0 0x14020000 0 0x1000>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_MUTEX_32K>;
mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
<CMDQ_EVENT_MUTEX1_STREAM_EOF>;
@@ -1228,7 +1294,7 @@ larb0: larb@14021000 {
compatible = "mediatek,mt8173-smi-larb";
reg = <0 0x14021000 0 0x1000>;
mediatek,smi = <&smi_common>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_SMI_LARB0>,
<&mmsys CLK_MM_SMI_LARB0>;
clock-names = "apb", "smi";
@@ -1237,7 +1303,7 @@ larb0: larb@14021000 {
smi_common: smi@14022000 {
compatible = "mediatek,mt8173-smi-common";
reg = <0 0x14022000 0 0x1000>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_SMI_COMMON>,
<&mmsys CLK_MM_SMI_COMMON>;
clock-names = "apb", "smi";
@@ -1285,7 +1351,7 @@ larb4: larb@14027000 {
compatible = "mediatek,mt8173-smi-larb";
reg = <0 0x14027000 0 0x1000>;
mediatek,smi = <&smi_common>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_SMI_LARB4>,
<&mmsys CLK_MM_SMI_LARB4>;
clock-names = "apb", "smi";
@@ -1301,7 +1367,7 @@ larb2: larb@15001000 {
compatible = "mediatek,mt8173-smi-larb";
reg = <0 0x15001000 0 0x1000>;
mediatek,smi = <&smi_common>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_ISP>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_ISP>;
clocks = <&imgsys CLK_IMG_LARB2_SMI>,
<&imgsys CLK_IMG_LARB2_SMI>;
clock-names = "apb", "smi";
@@ -1338,7 +1404,7 @@ vcodec_dec: vcodec@16000000 {
<&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
<&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
mediatek,vpu = <&vpu>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>;
clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
<&topckgen CLK_TOP_UNIVPLL_D2>,
<&topckgen CLK_TOP_CCI400_SEL>,
@@ -1370,7 +1436,7 @@ larb1: larb@16010000 {
compatible = "mediatek,mt8173-smi-larb";
reg = <0 0x16010000 0 0x1000>;
mediatek,smi = <&smi_common>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>;
clocks = <&vdecsys CLK_VDEC_CKEN>,
<&vdecsys CLK_VDEC_LARB_CKEN>;
clock-names = "apb", "smi";
@@ -1386,7 +1452,7 @@ larb3: larb@18001000 {
compatible = "mediatek,mt8173-smi-larb";
reg = <0 0x18001000 0 0x1000>;
mediatek,smi = <&smi_common>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
clocks = <&vencsys CLK_VENC_CKE1>,
<&vencsys CLK_VENC_CKE0>;
clock-names = "apb", "smi";
@@ -1443,7 +1509,7 @@ jpegdec: jpegdec@18004000 {
<&vencsys CLK_VENC_CKE3>;
clock-names = "jpgdec-smi",
"jpgdec";
- power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
mediatek,larb = <&larb3>;
iommus = <&iommu M4U_PORT_JPGDEC_WDMA>,
<&iommu M4U_PORT_JPGDEC_BSDMA>;
@@ -1459,7 +1525,7 @@ larb5: larb@19001000 {
compatible = "mediatek,mt8173-smi-larb";
reg = <0 0x19001000 0 0x1000>;
mediatek,smi = <&smi_common>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC_LT>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_VENC_LT>;
clocks = <&vencltsys CLK_VENCLT_CKE1>,
<&vencltsys CLK_VENCLT_CKE0>;
clock-names = "apb", "smi";
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH v4 04/16] soc: mediatek: pm-domains: Add bus protection protocol
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
` (2 preceding siblings ...)
2020-10-30 11:36 ` [PATCH v4 03/16] arm64: dts: mediatek: Add mt8173 power domain controller Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-10-30 11:36 ` [PATCH v4 05/16] soc: mediatek: pm_domains: Make bus protection generic Enric Balletbo i Serra
` (12 subsequent siblings)
16 siblings, 0 replies; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: drinkcat, weiyi.lu, fparent, Matthias Brugger, linux-mediatek,
hsinyi, matthias.bgg, Collabora Kernel ML, linux-arm-kernel
From: Matthias Brugger <mbrugger@suse.com>
Bus protection will need to update more then one register
in infracfg. Add support for several operations.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v4:
- Define SPM_MAX_BUS_PROT_DATA to 5 to be compatible with MT8192
- Disable the bus protection in the reverse order for scpsys_bus_protect_disable().
Changes in v3: None
Changes in v2: None
drivers/soc/mediatek/mt8173-pm-domains.h | 4 +--
drivers/soc/mediatek/mtk-pm-domains.c | 36 +++++++++++++++++-------
drivers/soc/mediatek/mtk-pm-domains.h | 4 ++-
3 files changed, 31 insertions(+), 13 deletions(-)
diff --git a/drivers/soc/mediatek/mt8173-pm-domains.h b/drivers/soc/mediatek/mt8173-pm-domains.h
index 5f2b5d4ad02b..72b3acaf74fb 100644
--- a/drivers/soc/mediatek/mt8173-pm-domains.h
+++ b/drivers/soc/mediatek/mt8173-pm-domains.h
@@ -34,7 +34,7 @@ static const struct scpsys_domain_data scpsys_domain_data_mt8173[] = {
.ctl_offs = SPM_DIS_PWR_CON,
.sram_pdn_bits = GENMASK(11, 8),
.sram_pdn_ack_bits = GENMASK(12, 12),
- .bp_infracfg = {
+ .bp_infracfg[0] = {
.bus_prot_reg_update = true,
.bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MM_M0 |
MT8173_TOP_AXI_PROT_EN_MM_M1,
@@ -76,7 +76,7 @@ static const struct scpsys_domain_data scpsys_domain_data_mt8173[] = {
.ctl_offs = SPM_MFG_PWR_CON,
.sram_pdn_bits = GENMASK(13, 8),
.sram_pdn_ack_bits = GENMASK(21, 16),
- .bp_infracfg = {
+ .bp_infracfg[0] = {
.bus_prot_reg_update = true,
.bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MFG_S |
MT8173_TOP_AXI_PROT_EN_MFG_M0 |
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index f8e88308f2e0..06a16e45356a 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -88,24 +88,40 @@ static int scpsys_sram_disable(struct scpsys_domain *pd)
static int scpsys_bus_protect_enable(struct scpsys_domain *pd)
{
- const struct scpsys_bus_prot_data *bp_data = &pd->data->bp_infracfg;
+ const struct scpsys_bus_prot_data *bpd = pd->data->bp_infracfg;
+ int i, ret;
- if (!bp_data->bus_prot_mask)
- return 0;
+ for (i = 0; i < SPM_MAX_BUS_PROT_DATA; i++) {
+ if (!bpd[i].bus_prot_mask)
+ break;
- return mtk_infracfg_set_bus_protection(pd->infracfg, bp_data->bus_prot_mask,
- bp_data->bus_prot_reg_update);
+ ret = mtk_infracfg_set_bus_protection(pd->infracfg,
+ bpd[i].bus_prot_mask,
+ bpd[i].bus_prot_reg_update);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
static int scpsys_bus_protect_disable(struct scpsys_domain *pd)
{
- const struct scpsys_bus_prot_data *bp_data = &pd->data->bp_infracfg;
+ const struct scpsys_bus_prot_data *bpd = pd->data->bp_infracfg;
+ int i, ret;
- if (!bp_data->bus_prot_mask)
- return 0;
+ for (i = SPM_MAX_BUS_PROT_DATA; i > 0; i--) {
+ if (!bpd[i].bus_prot_mask)
+ continue;
- return mtk_infracfg_clear_bus_protection(pd->infracfg, bp_data->bus_prot_mask,
- bp_data->bus_prot_reg_update);
+ ret = mtk_infracfg_clear_bus_protection(pd->infracfg,
+ bpd[i].bus_prot_mask,
+ bpd[i].bus_prot_reg_update);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
static int scpsys_power_on(struct generic_pm_domain *genpd)
diff --git a/drivers/soc/mediatek/mtk-pm-domains.h b/drivers/soc/mediatek/mtk-pm-domains.h
index 7c479021d404..125880a58170 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.h
+++ b/drivers/soc/mediatek/mtk-pm-domains.h
@@ -32,6 +32,8 @@
#define PWR_STATUS_AUDIO BIT(24)
#define PWR_STATUS_USB BIT(25)
+#define SPM_MAX_BUS_PROT_DATA 5
+
struct scpsys_bus_prot_data {
u32 bus_prot_mask;
bool bus_prot_reg_update;
@@ -52,7 +54,7 @@ struct scpsys_domain_data {
u32 sram_pdn_bits;
u32 sram_pdn_ack_bits;
u8 caps;
- const struct scpsys_bus_prot_data bp_infracfg;
+ const struct scpsys_bus_prot_data bp_infracfg[SPM_MAX_BUS_PROT_DATA];
};
struct scpsys_soc_data {
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH v4 05/16] soc: mediatek: pm_domains: Make bus protection generic
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
` (3 preceding siblings ...)
2020-10-30 11:36 ` [PATCH v4 04/16] soc: mediatek: pm-domains: Add bus protection protocol Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-10-30 11:36 ` [PATCH v4 06/16] soc: mediatek: pm-domains: Add SMI block as bus protection block Enric Balletbo i Serra
` (11 subsequent siblings)
16 siblings, 0 replies; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: drinkcat, weiyi.lu, fparent, Miles Chen, Matthias Brugger,
linux-mediatek, Joerg Roedel, hsinyi, matthias.bgg,
Collabora Kernel ML, linux-arm-kernel
From: Matthias Brugger <mbrugger@suse.com>
Bus protection is not exclusively done by calling the infracfg misc driver.
Make the calls for setting and clearing the bus protection generic so
that we can use other blocks for it as well.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v4:
- Remove bpd variable from scpsys_bus_protect_[enable|disable]()
- Remove dependency of Kconfig symbol MTK_INFRACFG
Changes in v3: None
Changes in v2: None
drivers/soc/mediatek/Kconfig | 1 -
drivers/soc/mediatek/mtk-infracfg.c | 5 ---
drivers/soc/mediatek/mtk-pm-domains.c | 57 +++++++++++++++++++++------
include/linux/soc/mediatek/infracfg.h | 5 +++
4 files changed, 49 insertions(+), 19 deletions(-)
diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
index 68d800f9e4a5..67cef12dc585 100644
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -48,7 +48,6 @@ config MTK_SCPSYS_PM_DOMAINS
bool "MediaTek SCPSYS generic power domain"
default ARCH_MEDIATEK
depends on PM
- depends on MTK_INFRACFG
select PM_GENERIC_DOMAINS
select REGMAP
help
diff --git a/drivers/soc/mediatek/mtk-infracfg.c b/drivers/soc/mediatek/mtk-infracfg.c
index 4a123796aad3..0590b68e0d78 100644
--- a/drivers/soc/mediatek/mtk-infracfg.c
+++ b/drivers/soc/mediatek/mtk-infracfg.c
@@ -12,11 +12,6 @@
#define MTK_POLL_DELAY_US 10
#define MTK_POLL_TIMEOUT (jiffies_to_usecs(HZ))
-#define INFRA_TOPAXI_PROTECTEN 0x0220
-#define INFRA_TOPAXI_PROTECTSTA1 0x0228
-#define INFRA_TOPAXI_PROTECTEN_SET 0x0260
-#define INFRA_TOPAXI_PROTECTEN_CLR 0x0264
-
/**
* mtk_infracfg_set_bus_protection - enable bus protection
* @infracfg: The infracfg regmap
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index 06a16e45356a..6122701d018f 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -86,18 +86,24 @@ static int scpsys_sram_disable(struct scpsys_domain *pd)
MTK_POLL_TIMEOUT);
}
-static int scpsys_bus_protect_enable(struct scpsys_domain *pd)
+static int _scpsys_bus_protect_enable(const struct scpsys_bus_prot_data *bpd, struct regmap *regmap)
{
- const struct scpsys_bus_prot_data *bpd = pd->data->bp_infracfg;
int i, ret;
for (i = 0; i < SPM_MAX_BUS_PROT_DATA; i++) {
- if (!bpd[i].bus_prot_mask)
+ u32 val, mask = bpd[i].bus_prot_mask;
+
+ if (!mask)
break;
- ret = mtk_infracfg_set_bus_protection(pd->infracfg,
- bpd[i].bus_prot_mask,
- bpd[i].bus_prot_reg_update);
+ if (bpd[i].bus_prot_reg_update)
+ regmap_set_bits(regmap, bpd[i].bus_prot_set, mask);
+ else
+ regmap_write(regmap, INFRA_TOPAXI_PROTECTEN_SET, mask);
+
+ ret = regmap_read_poll_timeout(regmap, INFRA_TOPAXI_PROTECTSTA1,
+ val, (val & mask) == mask,
+ MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
if (ret)
return ret;
}
@@ -105,18 +111,34 @@ static int scpsys_bus_protect_enable(struct scpsys_domain *pd)
return 0;
}
-static int scpsys_bus_protect_disable(struct scpsys_domain *pd)
+static int scpsys_bus_protect_enable(struct scpsys_domain *pd)
+{
+ int ret;
+
+ ret = _scpsys_bus_protect_enable(pd->data->bp_infracfg, pd->infracfg);
+
+ return ret;
+}
+
+static int _scpsys_bus_protect_disable(const struct scpsys_bus_prot_data *bpd,
+ struct regmap *regmap)
{
- const struct scpsys_bus_prot_data *bpd = pd->data->bp_infracfg;
int i, ret;
- for (i = SPM_MAX_BUS_PROT_DATA; i > 0; i--) {
- if (!bpd[i].bus_prot_mask)
+ for (i = SPM_MAX_BUS_PROT_DATA - 1; i >= 0; i--) {
+ u32 val, mask = bpd[i].bus_prot_mask;
+
+ if (!mask)
continue;
- ret = mtk_infracfg_clear_bus_protection(pd->infracfg,
- bpd[i].bus_prot_mask,
- bpd[i].bus_prot_reg_update);
+ if (bpd[i].bus_prot_reg_update)
+ regmap_clear_bits(regmap, bpd[i].bus_prot_clr, mask);
+ else
+ regmap_write(regmap, INFRA_TOPAXI_PROTECTEN_CLR, mask);
+
+ ret = regmap_read_poll_timeout(regmap, INFRA_TOPAXI_PROTECTSTA1,
+ val, !(val & mask),
+ MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
if (ret)
return ret;
}
@@ -124,6 +146,15 @@ static int scpsys_bus_protect_disable(struct scpsys_domain *pd)
return 0;
}
+static int scpsys_bus_protect_disable(struct scpsys_domain *pd)
+{
+ int ret;
+
+ ret = _scpsys_bus_protect_disable(pd->data->bp_infracfg, pd->infracfg);
+
+ return ret;
+}
+
static int scpsys_power_on(struct generic_pm_domain *genpd)
{
struct scpsys_domain *pd = container_of(genpd, struct scpsys_domain, genpd);
diff --git a/include/linux/soc/mediatek/infracfg.h b/include/linux/soc/mediatek/infracfg.h
index 233463d789c6..5bcaab767f6a 100644
--- a/include/linux/soc/mediatek/infracfg.h
+++ b/include/linux/soc/mediatek/infracfg.h
@@ -32,6 +32,11 @@
#define MT7622_TOP_AXI_PROT_EN_WB (BIT(2) | BIT(6) | \
BIT(7) | BIT(8))
+#define INFRA_TOPAXI_PROTECTEN 0x0220
+#define INFRA_TOPAXI_PROTECTSTA1 0x0228
+#define INFRA_TOPAXI_PROTECTEN_SET 0x0260
+#define INFRA_TOPAXI_PROTECTEN_CLR 0x0264
+
#define REG_INFRA_MISC 0xf00
#define F_DDR_4GB_SUPPORT_EN BIT(13)
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH v4 06/16] soc: mediatek: pm-domains: Add SMI block as bus protection block
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
` (4 preceding siblings ...)
2020-10-30 11:36 ` [PATCH v4 05/16] soc: mediatek: pm_domains: Make bus protection generic Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-10-30 11:36 ` [PATCH v4 07/16] soc: mediatek: pm-domains: Add extra sram control Enric Balletbo i Serra
` (10 subsequent siblings)
16 siblings, 0 replies; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: drinkcat, weiyi.lu, fparent, Matthias Brugger, linux-mediatek,
hsinyi, matthias.bgg, Collabora Kernel ML, linux-arm-kernel
From: Matthias Brugger <mbrugger@suse.com>
Apart from the infracfg block, the SMI block is used to enable the bus
protection for some power domains. Add support for this block.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v4:
- Use the new syscon_regmap_lookup_by_phandle_optional() wrapper.
Changes in v3:
- Do not reuse bpd for 2 different things.
- Disable pd->smi first and after that pd->infracfg.
- Rename BUT_PROT_UPDATE_MT8173 to BUS_PROT_UPDATE_TOPAXI as in all the
other SoCs TOPAXI is mapped to the same address.
Changes in v2: None
drivers/soc/mediatek/mt8173-pm-domains.h | 18 ++++++++---------
drivers/soc/mediatek/mtk-pm-domains.c | 23 +++++++++++++++-------
drivers/soc/mediatek/mtk-pm-domains.h | 25 ++++++++++++++++++++++++
3 files changed, 49 insertions(+), 17 deletions(-)
diff --git a/drivers/soc/mediatek/mt8173-pm-domains.h b/drivers/soc/mediatek/mt8173-pm-domains.h
index 72b3acaf74fb..3e8ee5dabb43 100644
--- a/drivers/soc/mediatek/mt8173-pm-domains.h
+++ b/drivers/soc/mediatek/mt8173-pm-domains.h
@@ -34,10 +34,9 @@ static const struct scpsys_domain_data scpsys_domain_data_mt8173[] = {
.ctl_offs = SPM_DIS_PWR_CON,
.sram_pdn_bits = GENMASK(11, 8),
.sram_pdn_ack_bits = GENMASK(12, 12),
- .bp_infracfg[0] = {
- .bus_prot_reg_update = true,
- .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MM_M0 |
- MT8173_TOP_AXI_PROT_EN_MM_M1,
+ .bp_infracfg = {
+ BUS_PROT_UPDATE_TOPAXI(MT8173_TOP_AXI_PROT_EN_MM_M0 |
+ MT8173_TOP_AXI_PROT_EN_MM_M1),
},
},
[MT8173_POWER_DOMAIN_VENC_LT] = {
@@ -76,12 +75,11 @@ static const struct scpsys_domain_data scpsys_domain_data_mt8173[] = {
.ctl_offs = SPM_MFG_PWR_CON,
.sram_pdn_bits = GENMASK(13, 8),
.sram_pdn_ack_bits = GENMASK(21, 16),
- .bp_infracfg[0] = {
- .bus_prot_reg_update = true,
- .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MFG_S |
- MT8173_TOP_AXI_PROT_EN_MFG_M0 |
- MT8173_TOP_AXI_PROT_EN_MFG_M1 |
- MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT,
+ .bp_infracfg = {
+ BUS_PROT_UPDATE_TOPAXI(MT8173_TOP_AXI_PROT_EN_MFG_S |
+ MT8173_TOP_AXI_PROT_EN_MFG_M0 |
+ MT8173_TOP_AXI_PROT_EN_MFG_M1 |
+ MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT),
},
},
};
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index 6122701d018f..8a21847464c2 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -32,6 +32,7 @@ struct scpsys_domain {
int num_clks;
struct clk_bulk_data *clks;
struct regmap *infracfg;
+ struct regmap *smi;
};
struct scpsys {
@@ -99,9 +100,9 @@ static int _scpsys_bus_protect_enable(const struct scpsys_bus_prot_data *bpd, st
if (bpd[i].bus_prot_reg_update)
regmap_set_bits(regmap, bpd[i].bus_prot_set, mask);
else
- regmap_write(regmap, INFRA_TOPAXI_PROTECTEN_SET, mask);
+ regmap_write(regmap, bpd[i].bus_prot_set, mask);
- ret = regmap_read_poll_timeout(regmap, INFRA_TOPAXI_PROTECTSTA1,
+ ret = regmap_read_poll_timeout(regmap, bpd[i].bus_prot_sta,
val, (val & mask) == mask,
MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
if (ret)
@@ -116,8 +117,10 @@ static int scpsys_bus_protect_enable(struct scpsys_domain *pd)
int ret;
ret = _scpsys_bus_protect_enable(pd->data->bp_infracfg, pd->infracfg);
+ if (ret)
+ return ret;
- return ret;
+ return _scpsys_bus_protect_enable(pd->data->bp_smi, pd->smi);
}
static int _scpsys_bus_protect_disable(const struct scpsys_bus_prot_data *bpd,
@@ -134,9 +137,9 @@ static int _scpsys_bus_protect_disable(const struct scpsys_bus_prot_data *bpd,
if (bpd[i].bus_prot_reg_update)
regmap_clear_bits(regmap, bpd[i].bus_prot_clr, mask);
else
- regmap_write(regmap, INFRA_TOPAXI_PROTECTEN_CLR, mask);
+ regmap_write(regmap, bpd[i].bus_prot_clr, mask);
- ret = regmap_read_poll_timeout(regmap, INFRA_TOPAXI_PROTECTSTA1,
+ ret = regmap_read_poll_timeout(regmap, bpd[i].bus_prot_sta,
val, !(val & mask),
MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
if (ret)
@@ -150,9 +153,11 @@ static int scpsys_bus_protect_disable(struct scpsys_domain *pd)
{
int ret;
- ret = _scpsys_bus_protect_disable(pd->data->bp_infracfg, pd->infracfg);
+ ret = _scpsys_bus_protect_disable(pd->data->bp_smi, pd->smi);
+ if (ret)
+ return ret;
- return ret;
+ return _scpsys_bus_protect_disable(pd->data->bp_infracfg, pd->infracfg);
}
static int scpsys_power_on(struct generic_pm_domain *genpd)
@@ -267,6 +272,10 @@ generic_pm_domain *scpsys_add_one_domain(struct scpsys *scpsys, struct device_no
if (IS_ERR(pd->infracfg))
return ERR_CAST(pd->infracfg);
+ pd->smi = syscon_regmap_lookup_by_phandle_optional(node, "mediatek,smi");
+ if (IS_ERR(pd->smi))
+ return ERR_CAST(pd->smi);
+
pd->num_clks = of_clk_get_parent_count(node);
if (pd->num_clks > 0) {
pd->clks = devm_kcalloc(scpsys->dev, pd->num_clks, sizeof(*pd->clks), GFP_KERNEL);
diff --git a/drivers/soc/mediatek/mtk-pm-domains.h b/drivers/soc/mediatek/mtk-pm-domains.h
index 125880a58170..c2defbdcdf31 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.h
+++ b/drivers/soc/mediatek/mtk-pm-domains.h
@@ -34,8 +34,31 @@
#define SPM_MAX_BUS_PROT_DATA 5
+#define _BUS_PROT(_mask, _set, _clr, _sta, _update) { \
+ .bus_prot_mask = (_mask), \
+ .bus_prot_set = _set, \
+ .bus_prot_clr = _clr, \
+ .bus_prot_sta = _sta, \
+ .bus_prot_reg_update = _update, \
+ }
+
+#define BUS_PROT_WR(_mask, _set, _clr, _sta) \
+ _BUS_PROT(_mask, _set, _clr, _sta, false)
+
+#define BUS_PROT_UPDATE(_mask, _set, _clr, _sta) \
+ _BUS_PROT(_mask, _set, _clr, _sta, true)
+
+#define BUS_PROT_UPDATE_TOPAXI(_mask) \
+ BUS_PROT_UPDATE(_mask, \
+ INFRA_TOPAXI_PROTECTEN, \
+ INFRA_TOPAXI_PROTECTEN_CLR, \
+ INFRA_TOPAXI_PROTECTSTA1)
+
struct scpsys_bus_prot_data {
u32 bus_prot_mask;
+ u32 bus_prot_set;
+ u32 bus_prot_clr;
+ u32 bus_prot_sta;
bool bus_prot_reg_update;
};
@@ -47,6 +70,7 @@ struct scpsys_bus_prot_data {
* @sram_pdn_ack_bits: The mask for sram power control acked bits.
* @caps: The flag for active wake-up action.
* @bp_infracfg: bus protection for infracfg subsystem
+ * @bp_smi: bus protection for smi subsystem
*/
struct scpsys_domain_data {
u32 sta_mask;
@@ -55,6 +79,7 @@ struct scpsys_domain_data {
u32 sram_pdn_ack_bits;
u8 caps;
const struct scpsys_bus_prot_data bp_infracfg[SPM_MAX_BUS_PROT_DATA];
+ const struct scpsys_bus_prot_data bp_smi[SPM_MAX_BUS_PROT_DATA];
};
struct scpsys_soc_data {
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH v4 07/16] soc: mediatek: pm-domains: Add extra sram control
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
` (5 preceding siblings ...)
2020-10-30 11:36 ` [PATCH v4 06/16] soc: mediatek: pm-domains: Add SMI block as bus protection block Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-10-30 11:36 ` [PATCH v4 08/16] soc: mediatek: pm-domains: Add subsystem clocks Enric Balletbo i Serra
` (9 subsequent siblings)
16 siblings, 0 replies; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: drinkcat, weiyi.lu, fparent, Matthias Brugger, linux-mediatek,
hsinyi, matthias.bgg, Collabora Kernel ML, linux-arm-kernel
From: Matthias Brugger <mbrugger@suse.com>
For some power domains like vpu_core on MT8183 whose sram need to do clock
and internal isolation while power on/off sram. We add a cap
"MTK_SCPD_SRAM_ISO" to judge if we need to do the extra sram isolation
control or not.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Seires-changes: 4
- Use the regmap_[clear|set]_bits helpers.
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- Nit, split readl(ctl_addr) | pd->data->sram_pdn_bits in two lines.
- Use regmap API
drivers/soc/mediatek/mtk-pm-domains.c | 23 +++++++++++++++++++++--
drivers/soc/mediatek/mtk-pm-domains.h | 1 +
2 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index 8a21847464c2..a6f25933dbf0 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -24,6 +24,8 @@
#define PWR_ON_BIT BIT(2)
#define PWR_ON_2ND_BIT BIT(3)
#define PWR_CLK_DIS_BIT BIT(4)
+#define PWR_SRAM_CLKISO_BIT BIT(5)
+#define PWR_SRAM_ISOINT_B_BIT BIT(6)
struct scpsys_domain {
struct generic_pm_domain genpd;
@@ -65,12 +67,23 @@ static int scpsys_sram_enable(struct scpsys_domain *pd)
u32 pdn_ack = pd->data->sram_pdn_ack_bits;
struct scpsys *scpsys = pd->scpsys;
unsigned int tmp;
+ int ret;
regmap_clear_bits(scpsys->base, pd->data->ctl_offs, pd->data->sram_pdn_bits);
/* Either wait until SRAM_PDN_ACK all 1 or 0 */
- return regmap_read_poll_timeout(scpsys->base, pd->data->ctl_offs, tmp,
- (tmp & pdn_ack) == 0, MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+ ret = regmap_read_poll_timeout(scpsys->base, pd->data->ctl_offs, tmp,
+ (tmp & pdn_ack) == 0, MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+ if (ret < 0)
+ return ret;
+
+ if (MTK_SCPD_CAPS(pd, MTK_SCPD_SRAM_ISO)) {
+ regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_SRAM_ISOINT_B_BIT);
+ udelay(1);
+ regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_SRAM_CLKISO_BIT);
+ }
+
+ return 0;
}
static int scpsys_sram_disable(struct scpsys_domain *pd)
@@ -79,6 +92,12 @@ static int scpsys_sram_disable(struct scpsys_domain *pd)
struct scpsys *scpsys = pd->scpsys;
unsigned int tmp;
+ if (MTK_SCPD_CAPS(pd, MTK_SCPD_SRAM_ISO)) {
+ regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_SRAM_CLKISO_BIT);
+ udelay(1);
+ regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_SRAM_ISOINT_B_BIT);
+ }
+
regmap_set_bits(scpsys->base, pd->data->ctl_offs, pd->data->sram_pdn_bits);
/* Either wait until SRAM_PDN_ACK all 1 or 0 */
diff --git a/drivers/soc/mediatek/mtk-pm-domains.h b/drivers/soc/mediatek/mtk-pm-domains.h
index c2defbdcdf31..f190a0d9e592 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.h
+++ b/drivers/soc/mediatek/mtk-pm-domains.h
@@ -5,6 +5,7 @@
#define MTK_SCPD_ACTIVE_WAKEUP BIT(0)
#define MTK_SCPD_FWAIT_SRAM BIT(1)
+#define MTK_SCPD_SRAM_ISO BIT(2)
#define MTK_SCPD_CAPS(_scpd, _x) ((_scpd)->data->caps & (_x))
#define SPM_VDE_PWR_CON 0x0210
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH v4 08/16] soc: mediatek: pm-domains: Add subsystem clocks
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
` (6 preceding siblings ...)
2020-10-30 11:36 ` [PATCH v4 07/16] soc: mediatek: pm-domains: Add extra sram control Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-10-30 11:36 ` [PATCH v4 09/16] soc: mediatek: pm-domains: Allow bus protection to ignore clear ack Enric Balletbo i Serra
` (8 subsequent siblings)
16 siblings, 0 replies; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: drinkcat, weiyi.lu, fparent, Matthias Brugger, linux-mediatek,
hsinyi, matthias.bgg, Collabora Kernel ML, linux-arm-kernel
From: Matthias Brugger <mbrugger@suse.com>
For the bus protection operations, some subsystem clocks need to be enabled
before releasing the protection. This patch identifies the subsystem clocks
by it's name.
Suggested-by: Weiyi Lu <weiyi.lu@mediatek.com>
[Adapted the patch to the mtk-pm-domains driver]
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v4: None
Changes in v3:
- Prepare the basic clocks before we prepare the subsystem clocks.
Changes in v2:
- Use dev_err_probe if getting clocks fails, so an error is not printed
if is deferred.
drivers/soc/mediatek/mtk-pm-domains.c | 81 +++++++++++++++++++++++----
drivers/soc/mediatek/mtk-pm-domains.h | 2 +
2 files changed, 72 insertions(+), 11 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index a6f25933dbf0..88dec58aedd9 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -3,6 +3,7 @@
* Copyright (c) 2020 Collabora Ltd.
*/
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/iopoll.h>
@@ -33,6 +34,8 @@ struct scpsys_domain {
struct scpsys *scpsys;
int num_clks;
struct clk_bulk_data *clks;
+ int num_subsys_clks;
+ struct clk_bulk_data *subsys_clks;
struct regmap *infracfg;
struct regmap *smi;
};
@@ -204,9 +207,13 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_ISO_BIT);
regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_RST_B_BIT);
+ ret = clk_bulk_enable(pd->num_subsys_clks, pd->subsys_clks);
+ if (ret)
+ goto err_pwr_ack;
+
ret = scpsys_sram_enable(pd);
if (ret < 0)
- goto err_pwr_ack;
+ goto err_disable_subsys_clks;
ret = scpsys_bus_protect_disable(pd);
if (ret < 0)
@@ -216,6 +223,8 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
err_disable_sram:
scpsys_sram_disable(pd);
+err_disable_subsys_clks:
+ clk_bulk_disable(pd->num_subsys_clks, pd->subsys_clks);
err_pwr_ack:
clk_bulk_disable(pd->num_clks, pd->clks);
return ret;
@@ -236,6 +245,8 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
if (ret < 0)
return ret;
+ clk_bulk_disable(pd->num_subsys_clks, pd->subsys_clks);
+
/* subsys power off */
regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_RST_B_BIT);
regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_ISO_BIT);
@@ -259,7 +270,11 @@ generic_pm_domain *scpsys_add_one_domain(struct scpsys *scpsys, struct device_no
{
const struct scpsys_domain_data *domain_data;
struct scpsys_domain *pd;
- int i, ret;
+ struct property *prop;
+ const char *clk_name;
+ int i, ret, num_clks;
+ struct clk *clk;
+ int clk_ind = 0;
u32 id;
ret = of_property_read_u32(node, "reg", &id);
@@ -295,25 +310,62 @@ generic_pm_domain *scpsys_add_one_domain(struct scpsys *scpsys, struct device_no
if (IS_ERR(pd->smi))
return ERR_CAST(pd->smi);
- pd->num_clks = of_clk_get_parent_count(node);
- if (pd->num_clks > 0) {
+ num_clks = of_clk_get_parent_count(node);
+ if (num_clks > 0) {
+ /* Calculate number of subsys_clks */
+ of_property_for_each_string(node, "clock-names", prop, clk_name) {
+ char *subsys;
+
+ subsys = strchr(clk_name, '-');
+ if (subsys)
+ pd->num_subsys_clks++;
+ else
+ pd->num_clks++;
+ }
+
pd->clks = devm_kcalloc(scpsys->dev, pd->num_clks, sizeof(*pd->clks), GFP_KERNEL);
if (!pd->clks)
return ERR_PTR(-ENOMEM);
+
+ pd->subsys_clks = devm_kcalloc(scpsys->dev, pd->num_subsys_clks,
+ sizeof(*pd->subsys_clks), GFP_KERNEL);
+ if (!pd->subsys_clks)
+ return ERR_PTR(-ENOMEM);
+
}
for (i = 0; i < pd->num_clks; i++) {
- pd->clks[i].clk = of_clk_get(node, i);
- if (IS_ERR(pd->clks[i].clk)) {
- dev_err(scpsys->dev, "%pOF: failed to get clk at index %d\n",
- node, i);
- return ERR_PTR(-EINVAL);
+ clk = of_clk_get(node, i);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ dev_err_probe(scpsys->dev, ret,
+ "%pOF: failed to get clk at index %d: %d\n", node, i, ret);
+ goto err_put_clocks;
}
+
+ pd->clks[clk_ind++].clk = clk;
+ }
+
+ for (i = 0; i < pd->num_subsys_clks; i++) {
+ clk = of_clk_get(node, i + clk_ind);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ dev_err_probe(scpsys->dev, ret,
+ "%pOF: failed to get clk at index %d: %d\n", node,
+ i + clk_ind, ret);
+ goto err_put_subsys_clocks;
+ }
+
+ pd->subsys_clks[i].clk = clk;
}
ret = clk_bulk_prepare(pd->num_clks, pd->clks);
if (ret)
- goto err_put_clocks;
+ goto err_put_subsys_clocks;
+
+ ret = clk_bulk_prepare(pd->num_subsys_clks, pd->subsys_clks);
+ if (ret)
+ goto err_unprepare_clocks;
/*
* Initially turn on all domains to make the domains usable
@@ -331,7 +383,7 @@ generic_pm_domain *scpsys_add_one_domain(struct scpsys *scpsys, struct device_no
ret = -EINVAL;
dev_err(scpsys->dev,
"power domain with id %d already exists, check your device-tree\n", id);
- goto err_unprepare_clocks;
+ goto err_unprepare_subsys_clocks;
}
pd->genpd.name = node->name;
@@ -343,8 +395,12 @@ generic_pm_domain *scpsys_add_one_domain(struct scpsys *scpsys, struct device_no
return scpsys->pd_data.domains[id];
+err_unprepare_subsys_clocks:
+ clk_bulk_unprepare(pd->num_subsys_clks, pd->subsys_clks);
err_unprepare_clocks:
clk_bulk_unprepare(pd->num_clks, pd->clks);
+err_put_subsys_clocks:
+ clk_bulk_put(pd->num_subsys_clks, pd->subsys_clks);
err_put_clocks:
clk_bulk_put(pd->num_clks, pd->clks);
return ERR_PTR(ret);
@@ -421,6 +477,9 @@ static void scpsys_remove_one_domain(struct scpsys_domain *pd)
clk_bulk_unprepare(pd->num_clks, pd->clks);
clk_bulk_put(pd->num_clks, pd->clks);
+
+ clk_bulk_unprepare(pd->num_subsys_clks, pd->subsys_clks);
+ clk_bulk_put(pd->num_subsys_clks, pd->subsys_clks);
}
static void scpsys_domain_cleanup(struct scpsys *scpsys)
diff --git a/drivers/soc/mediatek/mtk-pm-domains.h b/drivers/soc/mediatek/mtk-pm-domains.h
index f190a0d9e592..20df5689739b 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.h
+++ b/drivers/soc/mediatek/mtk-pm-domains.h
@@ -63,6 +63,8 @@ struct scpsys_bus_prot_data {
bool bus_prot_reg_update;
};
+#define MAX_SUBSYS_CLKS 10
+
/**
* struct scpsys_domain_data - scp domain data for power on/off flow
* @sta_mask: The mask for power on/off status bit.
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH v4 09/16] soc: mediatek: pm-domains: Allow bus protection to ignore clear ack
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
` (7 preceding siblings ...)
2020-10-30 11:36 ` [PATCH v4 08/16] soc: mediatek: pm-domains: Add subsystem clocks Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-10-30 11:36 ` [PATCH v4 10/16] dt-bindings: power: Add MT8183 power domains Enric Balletbo i Serra
` (7 subsequent siblings)
16 siblings, 0 replies; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: drinkcat, weiyi.lu, fparent, Matthias Brugger, linux-mediatek,
hsinyi, matthias.bgg, Collabora Kernel ML, linux-arm-kernel
From: Matthias Brugger <mbrugger@suse.com>
In some cases the hardware does not create an acknowledgment of the
bus protection clearing. Add a flag to the bus protection indicating
that a clear event will be ignored.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/soc/mediatek/mtk-pm-domains.c | 3 +++
drivers/soc/mediatek/mtk-pm-domains.h | 23 ++++++++++++++---------
2 files changed, 17 insertions(+), 9 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index 88dec58aedd9..03279a999dfc 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -161,6 +161,9 @@ static int _scpsys_bus_protect_disable(const struct scpsys_bus_prot_data *bpd,
else
regmap_write(regmap, bpd[i].bus_prot_clr, mask);
+ if (bpd[i].ignore_clr_ack)
+ continue;
+
ret = regmap_read_poll_timeout(regmap, bpd[i].bus_prot_sta,
val, !(val & mask),
MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
diff --git a/drivers/soc/mediatek/mtk-pm-domains.h b/drivers/soc/mediatek/mtk-pm-domains.h
index 20df5689739b..809d2d43f01d 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.h
+++ b/drivers/soc/mediatek/mtk-pm-domains.h
@@ -35,19 +35,23 @@
#define SPM_MAX_BUS_PROT_DATA 5
-#define _BUS_PROT(_mask, _set, _clr, _sta, _update) { \
- .bus_prot_mask = (_mask), \
- .bus_prot_set = _set, \
- .bus_prot_clr = _clr, \
- .bus_prot_sta = _sta, \
- .bus_prot_reg_update = _update, \
+#define _BUS_PROT(_mask, _set, _clr, _sta, _update, _ignore) { \
+ .bus_prot_mask = (_mask), \
+ .bus_prot_set = _set, \
+ .bus_prot_clr = _clr, \
+ .bus_prot_sta = _sta, \
+ .bus_prot_reg_update = _update, \
+ .ignore_clr_ack = _ignore, \
}
-#define BUS_PROT_WR(_mask, _set, _clr, _sta) \
- _BUS_PROT(_mask, _set, _clr, _sta, false)
+#define BUS_PROT_WR(_mask, _set, _clr, _sta) \
+ _BUS_PROT(_mask, _set, _clr, _sta, false, false)
+
+#define BUS_PROT_WR_IGN(_mask, _set, _clr, _sta) \
+ _BUS_PROT(_mask, _set, _clr, _sta, false, true)
#define BUS_PROT_UPDATE(_mask, _set, _clr, _sta) \
- _BUS_PROT(_mask, _set, _clr, _sta, true)
+ _BUS_PROT(_mask, _set, _clr, _sta, true, false)
#define BUS_PROT_UPDATE_TOPAXI(_mask) \
BUS_PROT_UPDATE(_mask, \
@@ -61,6 +65,7 @@ struct scpsys_bus_prot_data {
u32 bus_prot_clr;
u32 bus_prot_sta;
bool bus_prot_reg_update;
+ bool ignore_clr_ack;
};
#define MAX_SUBSYS_CLKS 10
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH v4 10/16] dt-bindings: power: Add MT8183 power domains
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
` (8 preceding siblings ...)
2020-10-30 11:36 ` [PATCH v4 09/16] soc: mediatek: pm-domains: Allow bus protection to ignore clear ack Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-11-04 22:03 ` Rob Herring
2020-10-30 11:36 ` [PATCH v4 11/16] soc: mediatek: pm-domains: Add support for mt8183 Enric Balletbo i Serra
` (6 subsequent siblings)
16 siblings, 1 reply; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: devicetree, drinkcat, weiyi.lu, Rob Herring, fparent,
Matthias Brugger, linux-mediatek, hsinyi, matthias.bgg,
Collabora Kernel ML, linux-arm-kernel
Add power domains dt-bindings for MT8183.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../power/mediatek,power-controller.yaml | 2 ++
include/dt-bindings/power/mt8183-power.h | 26 +++++++++++++++++++
2 files changed, 28 insertions(+)
create mode 100644 include/dt-bindings/power/mt8183-power.h
diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
index 73b8988bd063..8cae43412327 100644
--- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
+++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
@@ -24,6 +24,7 @@ properties:
compatible:
enum:
- mediatek,mt8173-power-controller
+ - mediatek,mt8183-power-controller
'#power-domain-cells':
const: 1
@@ -58,6 +59,7 @@ patternProperties:
description: |
Power domain index. Valid values are defined in:
"include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
+ "include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain.
maxItems: 1
clocks:
diff --git a/include/dt-bindings/power/mt8183-power.h b/include/dt-bindings/power/mt8183-power.h
new file mode 100644
index 000000000000..d1ab387ba8c7
--- /dev/null
+++ b/include/dt-bindings/power/mt8183-power.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ * Author: Weiyi Lu <weiyi.lu@mediatek.com>
+ */
+
+#ifndef _DT_BINDINGS_POWER_MT8183_POWER_H
+#define _DT_BINDINGS_POWER_MT8183_POWER_H
+
+#define MT8183_POWER_DOMAIN_AUDIO 0
+#define MT8183_POWER_DOMAIN_CONN 1
+#define MT8183_POWER_DOMAIN_MFG_ASYNC 2
+#define MT8183_POWER_DOMAIN_MFG 3
+#define MT8183_POWER_DOMAIN_MFG_CORE0 4
+#define MT8183_POWER_DOMAIN_MFG_CORE1 5
+#define MT8183_POWER_DOMAIN_MFG_2D 6
+#define MT8183_POWER_DOMAIN_DISP 7
+#define MT8183_POWER_DOMAIN_CAM 8
+#define MT8183_POWER_DOMAIN_ISP 9
+#define MT8183_POWER_DOMAIN_VDEC 10
+#define MT8183_POWER_DOMAIN_VENC 11
+#define MT8183_POWER_DOMAIN_VPU_TOP 12
+#define MT8183_POWER_DOMAIN_VPU_CORE0 13
+#define MT8183_POWER_DOMAIN_VPU_CORE1 14
+
+#endif /* _DT_BINDINGS_POWER_MT8183_POWER_H */
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* Re: [PATCH v4 10/16] dt-bindings: power: Add MT8183 power domains
2020-10-30 11:36 ` [PATCH v4 10/16] dt-bindings: power: Add MT8183 power domains Enric Balletbo i Serra
@ 2020-11-04 22:03 ` Rob Herring
0 siblings, 0 replies; 23+ messages in thread
From: Rob Herring @ 2020-11-04 22:03 UTC (permalink / raw)
To: Enric Balletbo i Serra
Cc: drinkcat, Matthias Brugger, weiyi.lu, devicetree, linux-kernel,
fparent, Rob Herring, linux-mediatek, hsinyi, matthias.bgg,
Collabora Kernel ML, linux-arm-kernel
On Fri, 30 Oct 2020 12:36:16 +0100, Enric Balletbo i Serra wrote:
> Add power domains dt-bindings for MT8183.
>
> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
> .../power/mediatek,power-controller.yaml | 2 ++
> include/dt-bindings/power/mt8183-power.h | 26 +++++++++++++++++++
> 2 files changed, 28 insertions(+)
> create mode 100644 include/dt-bindings/power/mt8183-power.h
>
Acked-by: Rob Herring <robh@kernel.org>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v4 11/16] soc: mediatek: pm-domains: Add support for mt8183
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
` (9 preceding siblings ...)
2020-10-30 11:36 ` [PATCH v4 10/16] dt-bindings: power: Add MT8183 power domains Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-10-30 11:36 ` [PATCH v4 12/16] arm64: dts: mediatek: Add smi_common node for MT8183 Enric Balletbo i Serra
` (5 subsequent siblings)
16 siblings, 0 replies; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: drinkcat, weiyi.lu, fparent, Miles Chen, Matthias Brugger,
linux-mediatek, Joerg Roedel, hsinyi, matthias.bgg,
Collabora Kernel ML, linux-arm-kernel
From: Matthias Brugger <mbrugger@suse.com>
Add the needed board data to support mt8183 SoC.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v4:
- Adapt the scpsys_soc_data struct to the changes done in previous
patches.
Changes in v3:
- Do not remove mmsys from of_device_id. That's part of another
patchset.
- Move the soc specific data to separate include files.
Changes in v2:
- Do not use hardcoded values for triplets set, clear and status in
infracfg and SMI.
drivers/soc/mediatek/mt8183-pm-domains.h | 221 +++++++++++++++++++++++
drivers/soc/mediatek/mtk-pm-domains.c | 5 +
drivers/soc/mediatek/mtk-pm-domains.h | 1 +
include/linux/soc/mediatek/infracfg.h | 46 +++++
4 files changed, 273 insertions(+)
create mode 100644 drivers/soc/mediatek/mt8183-pm-domains.h
diff --git a/drivers/soc/mediatek/mt8183-pm-domains.h b/drivers/soc/mediatek/mt8183-pm-domains.h
new file mode 100644
index 000000000000..8d996c5d2682
--- /dev/null
+++ b/drivers/soc/mediatek/mt8183-pm-domains.h
@@ -0,0 +1,221 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __SOC_MEDIATEK_MT8183_PM_DOMAINS_H
+#define __SOC_MEDIATEK_MT8183_PM_DOMAINS_H
+
+#include "mtk-pm-domains.h"
+#include <dt-bindings/power/mt8183-power.h>
+
+/*
+ * MT8183 power domain support
+ */
+
+static const struct scpsys_domain_data scpsys_domain_data_mt8183[] = {
+ [MT8183_POWER_DOMAIN_AUDIO] = {
+ .sta_mask = PWR_STATUS_AUDIO,
+ .ctl_offs = 0x0314,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ },
+ [MT8183_POWER_DOMAIN_CONN] = {
+ .sta_mask = PWR_STATUS_CONN,
+ .ctl_offs = 0x032c,
+ .sram_pdn_bits = 0,
+ .sram_pdn_ack_bits = 0,
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_CONN, MT8183_TOP_AXI_PROT_EN_SET,
+ MT8183_TOP_AXI_PROT_EN_CLR, MT8183_TOP_AXI_PROT_EN_STA1),
+ },
+ },
+ [MT8183_POWER_DOMAIN_MFG_ASYNC] = {
+ .sta_mask = PWR_STATUS_MFG_ASYNC,
+ .ctl_offs = 0x0334,
+ .sram_pdn_bits = 0,
+ .sram_pdn_ack_bits = 0,
+ },
+ [MT8183_POWER_DOMAIN_MFG] = {
+ .sta_mask = PWR_STATUS_MFG,
+ .ctl_offs = 0x0338,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ },
+ [MT8183_POWER_DOMAIN_MFG_CORE0] = {
+ .sta_mask = BIT(7),
+ .ctl_offs = 0x034c,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ },
+ [MT8183_POWER_DOMAIN_MFG_CORE1] = {
+ .sta_mask = BIT(20),
+ .ctl_offs = 0x0310,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ },
+ [MT8183_POWER_DOMAIN_MFG_2D] = {
+ .sta_mask = PWR_STATUS_MFG_2D,
+ .ctl_offs = 0x0348,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_1_MFG, MT8183_TOP_AXI_PROT_EN_1_SET,
+ MT8183_TOP_AXI_PROT_EN_1_CLR, MT8183_TOP_AXI_PROT_EN_STA1_1),
+ BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_MFG, MT8183_TOP_AXI_PROT_EN_SET,
+ MT8183_TOP_AXI_PROT_EN_CLR, MT8183_TOP_AXI_PROT_EN_STA1),
+ },
+ },
+ [MT8183_POWER_DOMAIN_DISP] = {
+ .sta_mask = PWR_STATUS_DISP,
+ .ctl_offs = 0x030c,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_1_DISP, MT8183_TOP_AXI_PROT_EN_1_SET,
+ MT8183_TOP_AXI_PROT_EN_1_CLR, MT8183_TOP_AXI_PROT_EN_STA1_1),
+ BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_DISP, MT8183_TOP_AXI_PROT_EN_SET,
+ MT8183_TOP_AXI_PROT_EN_CLR, MT8183_TOP_AXI_PROT_EN_STA1),
+ },
+ .bp_smi = {
+ BUS_PROT_WR(MT8183_SMI_COMMON_SMI_CLAMP_DISP,
+ MT8183_SMI_COMMON_CLAMP_EN_SET,
+ MT8183_SMI_COMMON_CLAMP_EN_CLR,
+ MT8183_SMI_COMMON_CLAMP_EN),
+ },
+ },
+ [MT8183_POWER_DOMAIN_CAM] = {
+ .sta_mask = BIT(25),
+ .ctl_offs = 0x0344,
+ .sram_pdn_bits = GENMASK(9, 8),
+ .sram_pdn_ack_bits = GENMASK(13, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_MM_CAM, MT8183_TOP_AXI_PROT_EN_MM_SET,
+ MT8183_TOP_AXI_PROT_EN_MM_CLR, MT8183_TOP_AXI_PROT_EN_MM_STA1),
+ BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_CAM, MT8183_TOP_AXI_PROT_EN_SET,
+ MT8183_TOP_AXI_PROT_EN_CLR, MT8183_TOP_AXI_PROT_EN_STA1),
+ BUS_PROT_WR_IGN(MT8183_TOP_AXI_PROT_EN_MM_CAM_2ND,
+ MT8183_TOP_AXI_PROT_EN_MM_SET,
+ MT8183_TOP_AXI_PROT_EN_MM_CLR,
+ MT8183_TOP_AXI_PROT_EN_MM_STA1),
+ },
+ .bp_smi = {
+ BUS_PROT_WR(MT8183_SMI_COMMON_SMI_CLAMP_CAM,
+ MT8183_SMI_COMMON_CLAMP_EN_SET,
+ MT8183_SMI_COMMON_CLAMP_EN_CLR,
+ MT8183_SMI_COMMON_CLAMP_EN),
+ },
+ },
+ [MT8183_POWER_DOMAIN_ISP] = {
+ .sta_mask = PWR_STATUS_ISP,
+ .ctl_offs = 0x0308,
+ .sram_pdn_bits = GENMASK(9, 8),
+ .sram_pdn_ack_bits = GENMASK(13, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_MM_ISP,
+ MT8183_TOP_AXI_PROT_EN_MM_SET,
+ MT8183_TOP_AXI_PROT_EN_MM_CLR,
+ MT8183_TOP_AXI_PROT_EN_MM_STA1),
+ BUS_PROT_WR_IGN(MT8183_TOP_AXI_PROT_EN_MM_ISP_2ND,
+ MT8183_TOP_AXI_PROT_EN_MM_SET,
+ MT8183_TOP_AXI_PROT_EN_MM_CLR,
+ MT8183_TOP_AXI_PROT_EN_MM_STA1),
+ },
+ .bp_smi = {
+ BUS_PROT_WR(MT8183_SMI_COMMON_SMI_CLAMP_ISP,
+ MT8183_SMI_COMMON_CLAMP_EN_SET,
+ MT8183_SMI_COMMON_CLAMP_EN_CLR,
+ MT8183_SMI_COMMON_CLAMP_EN),
+ },
+ },
+ [MT8183_POWER_DOMAIN_VDEC] = {
+ .sta_mask = BIT(31),
+ .ctl_offs = 0x0300,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_smi = {
+ BUS_PROT_WR(MT8183_SMI_COMMON_SMI_CLAMP_VDEC,
+ MT8183_SMI_COMMON_CLAMP_EN_SET,
+ MT8183_SMI_COMMON_CLAMP_EN_CLR,
+ MT8183_SMI_COMMON_CLAMP_EN),
+ },
+ },
+ [MT8183_POWER_DOMAIN_VENC] = {
+ .sta_mask = PWR_STATUS_VENC,
+ .ctl_offs = 0x0304,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ .bp_smi = {
+ BUS_PROT_WR(MT8183_SMI_COMMON_SMI_CLAMP_VENC,
+ MT8183_SMI_COMMON_CLAMP_EN_SET,
+ MT8183_SMI_COMMON_CLAMP_EN_CLR,
+ MT8183_SMI_COMMON_CLAMP_EN),
+ },
+ },
+ [MT8183_POWER_DOMAIN_VPU_TOP] = {
+ .sta_mask = BIT(26),
+ .ctl_offs = 0x0324,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_MM_VPU_TOP,
+ MT8183_TOP_AXI_PROT_EN_MM_SET,
+ MT8183_TOP_AXI_PROT_EN_MM_CLR,
+ MT8183_TOP_AXI_PROT_EN_MM_STA1),
+ BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_VPU_TOP,
+ MT8183_TOP_AXI_PROT_EN_SET,
+ MT8183_TOP_AXI_PROT_EN_CLR,
+ MT8183_TOP_AXI_PROT_EN_STA1),
+ BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_MM_VPU_TOP_2ND,
+ MT8183_TOP_AXI_PROT_EN_MM_SET,
+ MT8183_TOP_AXI_PROT_EN_MM_CLR,
+ MT8183_TOP_AXI_PROT_EN_MM_STA1),
+ },
+ .bp_smi = {
+ BUS_PROT_WR(MT8183_SMI_COMMON_SMI_CLAMP_VPU_TOP,
+ MT8183_SMI_COMMON_CLAMP_EN_SET,
+ MT8183_SMI_COMMON_CLAMP_EN_CLR,
+ MT8183_SMI_COMMON_CLAMP_EN),
+ },
+ },
+ [MT8183_POWER_DOMAIN_VPU_CORE0] = {
+ .sta_mask = BIT(27),
+ .ctl_offs = 0x33c,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(13, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_MCU_VPU_CORE0,
+ MT8183_TOP_AXI_PROT_EN_MCU_SET,
+ MT8183_TOP_AXI_PROT_EN_MCU_CLR,
+ MT8183_TOP_AXI_PROT_EN_MCU_STA1),
+ BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_MCU_VPU_CORE0_2ND,
+ MT8183_TOP_AXI_PROT_EN_MCU_SET,
+ MT8183_TOP_AXI_PROT_EN_MCU_CLR,
+ MT8183_TOP_AXI_PROT_EN_MCU_STA1),
+ },
+ .caps = MTK_SCPD_SRAM_ISO,
+ },
+ [MT8183_POWER_DOMAIN_VPU_CORE1] = {
+ .sta_mask = BIT(28),
+ .ctl_offs = 0x0340,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(13, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_MCU_VPU_CORE1,
+ MT8183_TOP_AXI_PROT_EN_MCU_SET,
+ MT8183_TOP_AXI_PROT_EN_MCU_CLR,
+ MT8183_TOP_AXI_PROT_EN_MCU_STA1),
+ BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_MCU_VPU_CORE1_2ND,
+ MT8183_TOP_AXI_PROT_EN_MCU_SET,
+ MT8183_TOP_AXI_PROT_EN_MCU_CLR,
+ MT8183_TOP_AXI_PROT_EN_MCU_STA1),
+ },
+ .caps = MTK_SCPD_SRAM_ISO,
+ },
+};
+
+static const struct scpsys_soc_data mt8183_scpsys_data = {
+ .domains_data = scpsys_domain_data_mt8183,
+ .num_domains = ARRAY_SIZE(scpsys_domain_data_mt8183),
+ .pwr_sta_offs = 0x0180,
+ .pwr_sta2nd_offs = 0x0184
+};
+
+#endif /* __SOC_MEDIATEK_MT8183_PM_DOMAINS_H */
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index 03279a999dfc..8703d50cd2b7 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -16,6 +16,7 @@
#include <linux/soc/mediatek/infracfg.h>
#include "mt8173-pm-domains.h"
+#include "mt8183-pm-domains.h"
#define MTK_POLL_DELAY_US 10
#define MTK_POLL_TIMEOUT USEC_PER_SEC
@@ -505,6 +506,10 @@ static const struct of_device_id scpsys_of_match[] = {
.compatible = "mediatek,mt8173-power-controller",
.data = &mt8173_scpsys_data,
},
+ {
+ .compatible = "mediatek,mt8183-power-controller",
+ .data = &mt8183_scpsys_data,
+ },
{ }
};
diff --git a/drivers/soc/mediatek/mtk-pm-domains.h b/drivers/soc/mediatek/mtk-pm-domains.h
index 809d2d43f01d..2c745f11b422 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.h
+++ b/drivers/soc/mediatek/mtk-pm-domains.h
@@ -22,6 +22,7 @@
#define SPM_PWR_STATUS 0x060c
#define SPM_PWR_STATUS_2ND 0x0610
+#define PWR_STATUS_CONN BIT(1)
#define PWR_STATUS_DISP BIT(3)
#define PWR_STATUS_MFG BIT(4)
#define PWR_STATUS_ISP BIT(5)
diff --git a/include/linux/soc/mediatek/infracfg.h b/include/linux/soc/mediatek/infracfg.h
index 5bcaab767f6a..9d01e32e19bc 100644
--- a/include/linux/soc/mediatek/infracfg.h
+++ b/include/linux/soc/mediatek/infracfg.h
@@ -2,6 +2,52 @@
#ifndef __SOC_MEDIATEK_INFRACFG_H
#define __SOC_MEDIATEK_INFRACFG_H
+#define MT8183_TOP_AXI_PROT_EN_STA1 0x228
+#define MT8183_TOP_AXI_PROT_EN_STA1_1 0x258
+#define MT8183_TOP_AXI_PROT_EN_SET 0x2a0
+#define MT8183_TOP_AXI_PROT_EN_CLR 0x2a4
+#define MT8183_TOP_AXI_PROT_EN_1_SET 0x2a8
+#define MT8183_TOP_AXI_PROT_EN_1_CLR 0x2ac
+#define MT8183_TOP_AXI_PROT_EN_MCU_SET 0x2c4
+#define MT8183_TOP_AXI_PROT_EN_MCU_CLR 0x2c8
+#define MT8183_TOP_AXI_PROT_EN_MCU_STA1 0x2e4
+#define MT8183_TOP_AXI_PROT_EN_MM_SET 0x2d4
+#define MT8183_TOP_AXI_PROT_EN_MM_CLR 0x2d8
+#define MT8183_TOP_AXI_PROT_EN_MM_STA1 0x2ec
+
+#define MT8183_TOP_AXI_PROT_EN_DISP (BIT(10) | BIT(11))
+#define MT8183_TOP_AXI_PROT_EN_CONN (BIT(13) | BIT(14))
+#define MT8183_TOP_AXI_PROT_EN_MFG (BIT(21) | BIT(22))
+#define MT8183_TOP_AXI_PROT_EN_CAM BIT(28)
+#define MT8183_TOP_AXI_PROT_EN_VPU_TOP BIT(27)
+#define MT8183_TOP_AXI_PROT_EN_1_DISP (BIT(16) | BIT(17))
+#define MT8183_TOP_AXI_PROT_EN_1_MFG GENMASK(21, 19)
+#define MT8183_TOP_AXI_PROT_EN_MM_ISP (BIT(3) | BIT(8))
+#define MT8183_TOP_AXI_PROT_EN_MM_ISP_2ND BIT(10)
+#define MT8183_TOP_AXI_PROT_EN_MM_CAM (BIT(4) | BIT(5) | \
+ BIT(9) | BIT(13))
+#define MT8183_TOP_AXI_PROT_EN_MM_VPU_TOP (GENMASK(9, 6) | \
+ BIT(12))
+#define MT8183_TOP_AXI_PROT_EN_MM_VPU_TOP_2ND (BIT(10) | BIT(11))
+#define MT8183_TOP_AXI_PROT_EN_MM_CAM_2ND BIT(11)
+#define MT8183_TOP_AXI_PROT_EN_MCU_VPU_CORE0_2ND (BIT(0) | BIT(2) | \
+ BIT(4))
+#define MT8183_TOP_AXI_PROT_EN_MCU_VPU_CORE1_2ND (BIT(1) | BIT(3) | \
+ BIT(5))
+#define MT8183_TOP_AXI_PROT_EN_MCU_VPU_CORE0 BIT(6)
+#define MT8183_TOP_AXI_PROT_EN_MCU_VPU_CORE1 BIT(7)
+
+#define MT8183_SMI_COMMON_CLAMP_EN 0x3c0
+#define MT8183_SMI_COMMON_CLAMP_EN_SET 0x3c4
+#define MT8183_SMI_COMMON_CLAMP_EN_CLR 0x3c8
+
+#define MT8183_SMI_COMMON_SMI_CLAMP_DISP GENMASK(7, 0)
+#define MT8183_SMI_COMMON_SMI_CLAMP_VENC BIT(1)
+#define MT8183_SMI_COMMON_SMI_CLAMP_ISP BIT(2)
+#define MT8183_SMI_COMMON_SMI_CLAMP_CAM (BIT(3) | BIT(4))
+#define MT8183_SMI_COMMON_SMI_CLAMP_VPU_TOP (BIT(5) | BIT(6))
+#define MT8183_SMI_COMMON_SMI_CLAMP_VDEC BIT(7)
+
#define MT8173_TOP_AXI_PROT_EN_MCI_M2 BIT(0)
#define MT8173_TOP_AXI_PROT_EN_MM_M0 BIT(1)
#define MT8173_TOP_AXI_PROT_EN_MM_M1 BIT(2)
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH v4 12/16] arm64: dts: mediatek: Add smi_common node for MT8183
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
` (10 preceding siblings ...)
2020-10-30 11:36 ` [PATCH v4 11/16] soc: mediatek: pm-domains: Add support for mt8183 Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-10-30 11:36 ` [PATCH v4 13/16] arm64: dts: mediatek: Add mt8183 power domains controller Enric Balletbo i Serra
` (4 subsequent siblings)
16 siblings, 0 replies; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: devicetree, drinkcat, weiyi.lu, fparent, Rob Herring,
linux-mediatek, hsinyi, matthias.bgg, Collabora Kernel ML,
linux-arm-kernel
The SMI (Smart Multimedia Interface) Common is a bridge between the m4u
(Multimedia Memory Management Unit) and the Multimedia HW. This block is
needed to support different multimedia features, like display, video
decode, and camera. Also is needed to control the power domains of such
HW blocks.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 9cfd961c45eb..c06778d21c4f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -765,6 +765,16 @@ mmsys: syscon@14000000 {
#clock-cells = <1>;
};
+ smi_common: smi@14019000 {
+ compatible = "mediatek,mt8183-smi-common", "syscon";
+ reg = <0 0x14019000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_SMI_COMMON>,
+ <&mmsys CLK_MM_SMI_COMMON>,
+ <&mmsys CLK_MM_GALS_COMM0>,
+ <&mmsys CLK_MM_GALS_COMM1>;
+ clock-names = "apb", "smi", "gals0", "gals1";
+ };
+
imgsys: syscon@15020000 {
compatible = "mediatek,mt8183-imgsys", "syscon";
reg = <0 0x15020000 0 0x1000>;
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH v4 13/16] arm64: dts: mediatek: Add mt8183 power domains controller
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
` (11 preceding siblings ...)
2020-10-30 11:36 ` [PATCH v4 12/16] arm64: dts: mediatek: Add smi_common node for MT8183 Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-10-30 11:36 ` [PATCH v4 14/16] dt-bindings: power: Add MT8192 power domains Enric Balletbo i Serra
` (3 subsequent siblings)
16 siblings, 0 replies; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: devicetree, drinkcat, weiyi.lu, Rob Herring, fparent,
Matthias Brugger, linux-mediatek, hsinyi, matthias.bgg,
Collabora Kernel ML, linux-arm-kernel
From: Matthias Brugger <mbrugger@suse.com>
Add power domains controller node for SoC mt8183
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 162 +++++++++++++++++++++++
1 file changed, 162 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index c06778d21c4f..3e01592409cd 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/mt8183-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/mt8183-power.h>
#include <dt-bindings/reset-controller/mt8183-resets.h>
#include <dt-bindings/phy/phy.h>
#include "mt8183-pinfunc.h"
@@ -316,6 +317,167 @@ pio: pinctrl@10005000 {
#interrupt-cells = <2>;
};
+ scpsys: syscon@10006000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0 0x10006000 0 0x1000>;
+ #power-domain-cells = <1>;
+
+ /* System Power Manager */
+ spm: power-controller {
+ compatible = "mediatek,mt8183-power-controller";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ /* power domain of the SoC */
+ power-domain@MT8183_POWER_DOMAIN_AUDIO {
+ reg = <MT8183_POWER_DOMAIN_AUDIO>;
+ clocks = <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
+ <&infracfg CLK_INFRA_AUDIO>,
+ <&infracfg CLK_INFRA_AUDIO_26M_BCLK>;
+ clock-names = "audio", "audio1", "audio2";
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@MT8183_POWER_DOMAIN_CONN {
+ reg = <MT8183_POWER_DOMAIN_CONN>;
+ mediatek,infracfg = <&infracfg>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@MT8183_POWER_DOMAIN_MFG_ASYNC {
+ reg = <MT8183_POWER_DOMAIN_MFG_ASYNC>;
+ clocks = <&topckgen CLK_TOP_MUX_MFG>;
+ clock-names = "mfg";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ power-domain@MT8183_POWER_DOMAIN_MFG {
+ reg = <MT8183_POWER_DOMAIN_MFG>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ power-domain@MT8183_POWER_DOMAIN_MFG_CORE0 {
+ reg = <MT8183_POWER_DOMAIN_MFG_CORE0>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@MT8183_POWER_DOMAIN_MFG_CORE1 {
+ reg = <MT8183_POWER_DOMAIN_MFG_CORE1>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@MT8183_POWER_DOMAIN_MFG_2D {
+ reg = <MT8183_POWER_DOMAIN_MFG_2D>;
+ mediatek,infracfg = <&infracfg>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+
+ power-domain@MT8183_POWER_DOMAIN_DISP {
+ reg = <MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&topckgen CLK_TOP_MUX_MM>,
+ <&mmsys CLK_MM_SMI_COMMON>,
+ <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB1>,
+ <&mmsys CLK_MM_GALS_COMM0>,
+ <&mmsys CLK_MM_GALS_COMM1>,
+ <&mmsys CLK_MM_GALS_CCU2MM>,
+ <&mmsys CLK_MM_GALS_IPU12MM>,
+ <&mmsys CLK_MM_GALS_IMG2MM>,
+ <&mmsys CLK_MM_GALS_CAM2MM>,
+ <&mmsys CLK_MM_GALS_IPU2MM>;
+ clock-names = "mm", "mm-0", "mm-1", "mm-2", "mm-3",
+ "mm-4", "mm-5", "mm-6", "mm-7",
+ "mm-8", "mm-9";
+ mediatek,infracfg = <&infracfg>;
+ mediatek,smi = <&smi_common>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ power-domain@MT8183_POWER_DOMAIN_CAM {
+ reg = <MT8183_POWER_DOMAIN_CAM>;
+ clocks = <&topckgen CLK_TOP_MUX_CAM>,
+ <&camsys CLK_CAM_LARB6>,
+ <&camsys CLK_CAM_LARB3>,
+ <&camsys CLK_CAM_SENINF>,
+ <&camsys CLK_CAM_CAMSV0>,
+ <&camsys CLK_CAM_CAMSV1>,
+ <&camsys CLK_CAM_CAMSV2>,
+ <&camsys CLK_CAM_CCU>;
+ clock-names = "cam", "cam-0", "cam-1",
+ "cam-2", "cam-3", "cam-4",
+ "cam-5", "cam-6";
+ mediatek,infracfg = <&infracfg>;
+ mediatek,smi = <&smi_common>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@MT8183_POWER_DOMAIN_ISP {
+ reg = <MT8183_POWER_DOMAIN_ISP>;
+ clocks = <&topckgen CLK_TOP_MUX_IMG>,
+ <&imgsys CLK_IMG_LARB5>,
+ <&imgsys CLK_IMG_LARB2>;
+ clock-names = "isp", "isp-0", "isp-1";
+ mediatek,infracfg = <&infracfg>;
+ mediatek,smi = <&smi_common>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@MT8183_POWER_DOMAIN_VDEC {
+ reg = <MT8183_POWER_DOMAIN_VDEC>;
+ mediatek,smi = <&smi_common>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@MT8183_POWER_DOMAIN_VENC {
+ reg = <MT8183_POWER_DOMAIN_VENC>;
+ mediatek,smi = <&smi_common>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@MT8183_POWER_DOMAIN_VPU_TOP {
+ reg = <MT8183_POWER_DOMAIN_VPU_TOP>;
+ clocks = <&topckgen CLK_TOP_MUX_IPU_IF>,
+ <&topckgen CLK_TOP_MUX_DSP>,
+ <&ipu_conn CLK_IPU_CONN_IPU>,
+ <&ipu_conn CLK_IPU_CONN_AHB>,
+ <&ipu_conn CLK_IPU_CONN_AXI>,
+ <&ipu_conn CLK_IPU_CONN_ISP>,
+ <&ipu_conn CLK_IPU_CONN_CAM_ADL>,
+ <&ipu_conn CLK_IPU_CONN_IMG_ADL>;
+ clock-names = "vpu", "vpu1", "vpu-0", "vpu-1",
+ "vpu-2", "vpu-3", "vpu-4", "vpu-5";
+ mediatek,infracfg = <&infracfg>;
+ mediatek,smi = <&smi_common>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ power-domain@MT8183_POWER_DOMAIN_VPU_CORE0 {
+ reg = <MT8183_POWER_DOMAIN_VPU_CORE0>;
+ clocks = <&topckgen CLK_TOP_MUX_DSP1>;
+ clock-names = "vpu2";
+ mediatek,infracfg = <&infracfg>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@MT8183_POWER_DOMAIN_VPU_CORE1 {
+ reg = <MT8183_POWER_DOMAIN_VPU_CORE1>;
+ clocks = <&topckgen CLK_TOP_MUX_DSP2>;
+ clock-names = "vpu3";
+ mediatek,infracfg = <&infracfg>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+ };
+ };
+
watchdog: watchdog@10007000 {
compatible = "mediatek,mt8183-wdt";
reg = <0 0x10007000 0 0x100>;
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH v4 14/16] dt-bindings: power: Add MT8192 power domains
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
` (12 preceding siblings ...)
2020-10-30 11:36 ` [PATCH v4 13/16] arm64: dts: mediatek: Add mt8183 power domains controller Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-11-04 22:04 ` Rob Herring
2020-10-30 11:36 ` [PATCH v4 15/16] soc: mediatek: pm-domains: Add default power off flag Enric Balletbo i Serra
` (2 subsequent siblings)
16 siblings, 1 reply; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: devicetree, drinkcat, weiyi.lu, fparent, Rob Herring,
linux-mediatek, hsinyi, matthias.bgg, Collabora Kernel ML,
linux-arm-kernel
From: Weiyi Lu <weiyi.lu@mediatek.com>
Add power domains dt-bindings for MT8192.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../power/mediatek,power-controller.yaml | 2 ++
include/dt-bindings/power/mt8192-power.h | 32 +++++++++++++++++++
2 files changed, 34 insertions(+)
create mode 100644 include/dt-bindings/power/mt8192-power.h
diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
index 8cae43412327..fd12bafe3548 100644
--- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
+++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
@@ -25,6 +25,7 @@ properties:
enum:
- mediatek,mt8173-power-controller
- mediatek,mt8183-power-controller
+ - mediatek,mt8192-power-controller
'#power-domain-cells':
const: 1
@@ -60,6 +61,7 @@ patternProperties:
Power domain index. Valid values are defined in:
"include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
"include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain.
+ "include/dt-bindings/power/mt8192-power.h" - for MT8192 type power domain.
maxItems: 1
clocks:
diff --git a/include/dt-bindings/power/mt8192-power.h b/include/dt-bindings/power/mt8192-power.h
new file mode 100644
index 000000000000..4eaa53d7270a
--- /dev/null
+++ b/include/dt-bindings/power/mt8192-power.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (c) 2020 MediaTek Inc.
+ * Author: Weiyi Lu <weiyi.lu@mediatek.com>
+ */
+
+#ifndef _DT_BINDINGS_POWER_MT8192_POWER_H
+#define _DT_BINDINGS_POWER_MT8192_POWER_H
+
+#define MT8192_POWER_DOMAIN_AUDIO 0
+#define MT8192_POWER_DOMAIN_CONN 1
+#define MT8192_POWER_DOMAIN_MFG0 2
+#define MT8192_POWER_DOMAIN_MFG1 3
+#define MT8192_POWER_DOMAIN_MFG2 4
+#define MT8192_POWER_DOMAIN_MFG3 5
+#define MT8192_POWER_DOMAIN_MFG4 6
+#define MT8192_POWER_DOMAIN_MFG5 7
+#define MT8192_POWER_DOMAIN_MFG6 8
+#define MT8192_POWER_DOMAIN_DISP 9
+#define MT8192_POWER_DOMAIN_IPE 10
+#define MT8192_POWER_DOMAIN_ISP 11
+#define MT8192_POWER_DOMAIN_ISP2 12
+#define MT8192_POWER_DOMAIN_MDP 13
+#define MT8192_POWER_DOMAIN_VENC 14
+#define MT8192_POWER_DOMAIN_VDEC 15
+#define MT8192_POWER_DOMAIN_VDEC2 16
+#define MT8192_POWER_DOMAIN_CAM 17
+#define MT8192_POWER_DOMAIN_CAM_RAWA 18
+#define MT8192_POWER_DOMAIN_CAM_RAWB 19
+#define MT8192_POWER_DOMAIN_CAM_RAWC 20
+
+#endif /* _DT_BINDINGS_POWER_MT8192_POWER_H */
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* Re: [PATCH v4 14/16] dt-bindings: power: Add MT8192 power domains
2020-10-30 11:36 ` [PATCH v4 14/16] dt-bindings: power: Add MT8192 power domains Enric Balletbo i Serra
@ 2020-11-04 22:04 ` Rob Herring
0 siblings, 0 replies; 23+ messages in thread
From: Rob Herring @ 2020-11-04 22:04 UTC (permalink / raw)
To: Enric Balletbo i Serra
Cc: devicetree, drinkcat, weiyi.lu, linux-kernel, fparent,
Rob Herring, linux-mediatek, hsinyi, matthias.bgg,
Collabora Kernel ML, linux-arm-kernel
On Fri, 30 Oct 2020 12:36:20 +0100, Enric Balletbo i Serra wrote:
> From: Weiyi Lu <weiyi.lu@mediatek.com>
>
> Add power domains dt-bindings for MT8192.
>
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
> .../power/mediatek,power-controller.yaml | 2 ++
> include/dt-bindings/power/mt8192-power.h | 32 +++++++++++++++++++
> 2 files changed, 34 insertions(+)
> create mode 100644 include/dt-bindings/power/mt8192-power.h
>
Acked-by: Rob Herring <robh@kernel.org>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v4 15/16] soc: mediatek: pm-domains: Add default power off flag
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
` (13 preceding siblings ...)
2020-10-30 11:36 ` [PATCH v4 14/16] dt-bindings: power: Add MT8192 power domains Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-10-30 11:36 ` [PATCH v4 16/16] soc: mediatek: pm-domains: Add support for mt8192 Enric Balletbo i Serra
2020-11-27 11:19 ` [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Matthias Brugger
16 siblings, 0 replies; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: drinkcat, weiyi.lu, fparent, linux-mediatek, hsinyi,
matthias.bgg, Collabora Kernel ML, linux-arm-kernel
From: Weiyi Lu <weiyi.lu@mediatek.com>
For some power domain, like conn on MT8192, it should be default OFF.
Because the power on/off control relies the function of connectivity chip
and its firmware. And if project choose other chip vendor solution,
those necessary connectivity functions will not provided.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v4:
- Check via scpsys_domain_is_on() if a power domain is on when removing.
Changes in v3: None
Changes in v2: None
drivers/soc/mediatek/mtk-pm-domains.c | 25 ++++++++++++++++++-------
drivers/soc/mediatek/mtk-pm-domains.h | 1 +
2 files changed, 19 insertions(+), 7 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index 8703d50cd2b7..c3b85b69f2f7 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -377,10 +377,16 @@ generic_pm_domain *scpsys_add_one_domain(struct scpsys *scpsys, struct device_no
* software. The unused domains will be switched off during
* late_init time.
*/
- ret = scpsys_power_on(&pd->genpd);
- if (ret < 0) {
- dev_err(scpsys->dev, "%pOF: failed to power on domain: %d\n", node, ret);
- goto err_unprepare_clocks;
+ if (MTK_SCPD_CAPS(pd, MTK_SCPD_KEEP_DEFAULT_OFF)) {
+ if (scpsys_domain_is_on(pd))
+ dev_warn(scpsys->dev,
+ "%pOF: A default off power domain has been ON\n", node);
+ } else {
+ ret = scpsys_power_on(&pd->genpd);
+ if (ret < 0) {
+ dev_err(scpsys->dev, "%pOF: failed to power on domain: %d\n", node, ret);
+ goto err_unprepare_clocks;
+ }
}
if (scpsys->domains[id]) {
@@ -394,7 +400,11 @@ generic_pm_domain *scpsys_add_one_domain(struct scpsys *scpsys, struct device_no
pd->genpd.power_off = scpsys_power_off;
pd->genpd.power_on = scpsys_power_on;
- pm_genpd_init(&pd->genpd, NULL, false);
+ if (MTK_SCPD_CAPS(pd, MTK_SCPD_KEEP_DEFAULT_OFF))
+ pm_genpd_init(&pd->genpd, NULL, true);
+ else
+ pm_genpd_init(&pd->genpd, NULL, false);
+
scpsys->domains[id] = &pd->genpd;
return scpsys->pd_data.domains[id];
@@ -467,6 +477,9 @@ static void scpsys_remove_one_domain(struct scpsys_domain *pd)
{
int ret;
+ if (scpsys_domain_is_on(pd))
+ scpsys_power_off(&pd->genpd);
+
/*
* We're in the error cleanup already, so we only complain,
* but won't emit another error on top of the original one.
@@ -477,8 +490,6 @@ static void scpsys_remove_one_domain(struct scpsys_domain *pd)
"failed to remove domain '%s' : %d - state may be inconsistent\n",
pd->genpd.name, ret);
- scpsys_power_off(&pd->genpd);
-
clk_bulk_unprepare(pd->num_clks, pd->clks);
clk_bulk_put(pd->num_clks, pd->clks);
diff --git a/drivers/soc/mediatek/mtk-pm-domains.h b/drivers/soc/mediatek/mtk-pm-domains.h
index 2c745f11b422..a2f4d8f97e05 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.h
+++ b/drivers/soc/mediatek/mtk-pm-domains.h
@@ -6,6 +6,7 @@
#define MTK_SCPD_ACTIVE_WAKEUP BIT(0)
#define MTK_SCPD_FWAIT_SRAM BIT(1)
#define MTK_SCPD_SRAM_ISO BIT(2)
+#define MTK_SCPD_KEEP_DEFAULT_OFF BIT(3)
#define MTK_SCPD_CAPS(_scpd, _x) ((_scpd)->data->caps & (_x))
#define SPM_VDE_PWR_CON 0x0210
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH v4 16/16] soc: mediatek: pm-domains: Add support for mt8192
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
` (14 preceding siblings ...)
2020-10-30 11:36 ` [PATCH v4 15/16] soc: mediatek: pm-domains: Add default power off flag Enric Balletbo i Serra
@ 2020-10-30 11:36 ` Enric Balletbo i Serra
2020-11-19 11:12 ` Weiyi Lu
2020-11-27 11:19 ` [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Matthias Brugger
16 siblings, 1 reply; 23+ messages in thread
From: Enric Balletbo i Serra @ 2020-10-30 11:36 UTC (permalink / raw)
To: linux-kernel
Cc: drinkcat, weiyi.lu, fparent, Miles Chen, Joerg Roedel,
linux-mediatek, hsinyi, matthias.bgg, Collabora Kernel ML,
linux-arm-kernel
From: Weiyi Lu <weiyi.lu@mediatek.com>
Add the needed board data to support mt8192 SoC.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v4:
- Adapt scpsys_soc_data struct to the changes done in previous patches.
Changes in v3: None
Changes in v2: None
drivers/soc/mediatek/mt8192-pm-domains.h | 292 +++++++++++++++++++++++
drivers/soc/mediatek/mtk-pm-domains.c | 5 +
include/linux/soc/mediatek/infracfg.h | 56 +++++
3 files changed, 353 insertions(+)
create mode 100644 drivers/soc/mediatek/mt8192-pm-domains.h
diff --git a/drivers/soc/mediatek/mt8192-pm-domains.h b/drivers/soc/mediatek/mt8192-pm-domains.h
new file mode 100644
index 000000000000..0fdf6dc6231f
--- /dev/null
+++ b/drivers/soc/mediatek/mt8192-pm-domains.h
@@ -0,0 +1,292 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __SOC_MEDIATEK_MT8192_PM_DOMAINS_H
+#define __SOC_MEDIATEK_MT8192_PM_DOMAINS_H
+
+#include "mtk-pm-domains.h"
+#include <dt-bindings/power/mt8192-power.h>
+
+/*
+ * MT8192 power domain support
+ */
+
+static const struct scpsys_domain_data scpsys_domain_data_mt8192[] = {
+ [MT8192_POWER_DOMAIN_AUDIO] = {
+ .sta_mask = BIT(21),
+ .ctl_offs = 0x0354,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_2_AUDIO,
+ MT8192_TOP_AXI_PROT_EN_2_SET,
+ MT8192_TOP_AXI_PROT_EN_2_CLR,
+ MT8192_TOP_AXI_PROT_EN_2_STA1),
+ },
+ },
+ [MT8192_POWER_DOMAIN_CONN] = {
+ .sta_mask = PWR_STATUS_CONN,
+ .ctl_offs = 0x0304,
+ .sram_pdn_bits = 0,
+ .sram_pdn_ack_bits = 0,
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_CONN,
+ MT8192_TOP_AXI_PROT_EN_SET,
+ MT8192_TOP_AXI_PROT_EN_CLR,
+ MT8192_TOP_AXI_PROT_EN_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_CONN_2ND,
+ MT8192_TOP_AXI_PROT_EN_SET,
+ MT8192_TOP_AXI_PROT_EN_CLR,
+ MT8192_TOP_AXI_PROT_EN_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_1_CONN,
+ MT8192_TOP_AXI_PROT_EN_1_SET,
+ MT8192_TOP_AXI_PROT_EN_1_CLR,
+ MT8192_TOP_AXI_PROT_EN_1_STA1),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8192_POWER_DOMAIN_MFG0] = {
+ .sta_mask = BIT(2),
+ .ctl_offs = 0x0308,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ },
+ [MT8192_POWER_DOMAIN_MFG1] = {
+ .sta_mask = BIT(3),
+ .ctl_offs = 0x030c,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_1_MFG1,
+ MT8192_TOP_AXI_PROT_EN_1_SET,
+ MT8192_TOP_AXI_PROT_EN_1_CLR,
+ MT8192_TOP_AXI_PROT_EN_1_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_2_MFG1,
+ MT8192_TOP_AXI_PROT_EN_2_SET,
+ MT8192_TOP_AXI_PROT_EN_2_CLR,
+ MT8192_TOP_AXI_PROT_EN_2_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MFG1,
+ MT8192_TOP_AXI_PROT_EN_SET,
+ MT8192_TOP_AXI_PROT_EN_CLR,
+ MT8192_TOP_AXI_PROT_EN_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_2_MFG1_2ND,
+ MT8192_TOP_AXI_PROT_EN_2_SET,
+ MT8192_TOP_AXI_PROT_EN_2_CLR,
+ MT8192_TOP_AXI_PROT_EN_2_STA1),
+ },
+ },
+ [MT8192_POWER_DOMAIN_MFG2] = {
+ .sta_mask = BIT(4),
+ .ctl_offs = 0x0310,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ },
+ [MT8192_POWER_DOMAIN_MFG3] = {
+ .sta_mask = BIT(5),
+ .ctl_offs = 0x0314,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ },
+ [MT8192_POWER_DOMAIN_MFG4] = {
+ .sta_mask = BIT(6),
+ .ctl_offs = 0x0318,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ },
+ [MT8192_POWER_DOMAIN_MFG5] = {
+ .sta_mask = BIT(7),
+ .ctl_offs = 0x031c,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ },
+ [MT8192_POWER_DOMAIN_MFG6] = {
+ .sta_mask = BIT(8),
+ .ctl_offs = 0x0320,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ },
+ [MT8192_POWER_DOMAIN_DISP] = {
+ .sta_mask = BIT(20),
+ .ctl_offs = 0x0350,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR_IGN(MT8192_TOP_AXI_PROT_EN_MM_DISP,
+ MT8192_TOP_AXI_PROT_EN_MM_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_STA1),
+ BUS_PROT_WR_IGN(MT8192_TOP_AXI_PROT_EN_MM_2_DISP,
+ MT8192_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_2_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_DISP,
+ MT8192_TOP_AXI_PROT_EN_SET,
+ MT8192_TOP_AXI_PROT_EN_CLR,
+ MT8192_TOP_AXI_PROT_EN_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_DISP_2ND,
+ MT8192_TOP_AXI_PROT_EN_MM_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_2_DISP_2ND,
+ MT8192_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_2_STA1),
+ },
+ },
+ [MT8192_POWER_DOMAIN_IPE] = {
+ .sta_mask = BIT(14),
+ .ctl_offs = 0x0338,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_IPE,
+ MT8192_TOP_AXI_PROT_EN_MM_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_IPE_2ND,
+ MT8192_TOP_AXI_PROT_EN_MM_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_STA1),
+ },
+ },
+ [MT8192_POWER_DOMAIN_ISP] = {
+ .sta_mask = BIT(12),
+ .ctl_offs = 0x0330,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_2_ISP,
+ MT8192_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_2_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_2_ISP_2ND,
+ MT8192_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_2_STA1),
+ },
+ },
+ [MT8192_POWER_DOMAIN_ISP2] = {
+ .sta_mask = BIT(13),
+ .ctl_offs = 0x0334,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_ISP2,
+ MT8192_TOP_AXI_PROT_EN_MM_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_ISP2_2ND,
+ MT8192_TOP_AXI_PROT_EN_MM_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_STA1),
+ },
+ },
+ [MT8192_POWER_DOMAIN_MDP] = {
+ .sta_mask = BIT(19),
+ .ctl_offs = 0x034c,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_2_MDP,
+ MT8192_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_2_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_2_MDP_2ND,
+ MT8192_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_2_STA1),
+ },
+ },
+ [MT8192_POWER_DOMAIN_VENC] = {
+ .sta_mask = BIT(17),
+ .ctl_offs = 0x0344,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_VENC,
+ MT8192_TOP_AXI_PROT_EN_MM_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_VENC_2ND,
+ MT8192_TOP_AXI_PROT_EN_MM_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_STA1),
+ },
+ },
+ [MT8192_POWER_DOMAIN_VDEC] = {
+ .sta_mask = BIT(15),
+ .ctl_offs = 0x033c,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_VDEC,
+ MT8192_TOP_AXI_PROT_EN_MM_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_VDEC_2ND,
+ MT8192_TOP_AXI_PROT_EN_MM_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_STA1),
+ },
+ },
+ [MT8192_POWER_DOMAIN_VDEC2] = {
+ .sta_mask = BIT(16),
+ .ctl_offs = 0x0340,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ },
+ [MT8192_POWER_DOMAIN_CAM] = {
+ .sta_mask = BIT(23),
+ .ctl_offs = 0x035c,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_2_CAM,
+ MT8192_TOP_AXI_PROT_EN_2_SET,
+ MT8192_TOP_AXI_PROT_EN_2_CLR,
+ MT8192_TOP_AXI_PROT_EN_2_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_CAM,
+ MT8192_TOP_AXI_PROT_EN_MM_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_1_CAM,
+ MT8192_TOP_AXI_PROT_EN_1_SET,
+ MT8192_TOP_AXI_PROT_EN_1_CLR,
+ MT8192_TOP_AXI_PROT_EN_1_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_CAM_2ND,
+ MT8192_TOP_AXI_PROT_EN_MM_SET,
+ MT8192_TOP_AXI_PROT_EN_MM_CLR,
+ MT8192_TOP_AXI_PROT_EN_MM_STA1),
+ BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_VDNR_CAM,
+ MT8192_TOP_AXI_PROT_EN_VDNR_SET,
+ MT8192_TOP_AXI_PROT_EN_VDNR_CLR,
+ MT8192_TOP_AXI_PROT_EN_VDNR_STA1),
+ },
+ },
+ [MT8192_POWER_DOMAIN_CAM_RAWA] = {
+ .sta_mask = BIT(24),
+ .ctl_offs = 0x0360,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ },
+ [MT8192_POWER_DOMAIN_CAM_RAWB] = {
+ .sta_mask = BIT(25),
+ .ctl_offs = 0x0364,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ },
+ [MT8192_POWER_DOMAIN_CAM_RAWC] = {
+ .sta_mask = BIT(26),
+ .ctl_offs = 0x0368,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ },
+};
+
+static const struct scpsys_soc_data mt8192_scpsys_data = {
+ .domains_data = scpsys_domain_data_mt8192,
+ .num_domains = ARRAY_SIZE(scpsys_domain_data_mt8192),
+ .pwr_sta_offs = 0x016c,
+ .pwr_sta2nd_offs = 0x0170,
+};
+
+#endif /* __SOC_MEDIATEK_MT8192_PM_DOMAINS_H */
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index c3b85b69f2f7..fb70cb3b07b3 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -17,6 +17,7 @@
#include "mt8173-pm-domains.h"
#include "mt8183-pm-domains.h"
+#include "mt8192-pm-domains.h"
#define MTK_POLL_DELAY_US 10
#define MTK_POLL_TIMEOUT USEC_PER_SEC
@@ -521,6 +522,10 @@ static const struct of_device_id scpsys_of_match[] = {
.compatible = "mediatek,mt8183-power-controller",
.data = &mt8183_scpsys_data,
},
+ {
+ .compatible = "mediatek,mt8192-power-controller",
+ .data = &mt8192_scpsys_data,
+ },
{ }
};
diff --git a/include/linux/soc/mediatek/infracfg.h b/include/linux/soc/mediatek/infracfg.h
index 9d01e32e19bc..e7842debc05d 100644
--- a/include/linux/soc/mediatek/infracfg.h
+++ b/include/linux/soc/mediatek/infracfg.h
@@ -2,6 +2,62 @@
#ifndef __SOC_MEDIATEK_INFRACFG_H
#define __SOC_MEDIATEK_INFRACFG_H
+#define MT8192_TOP_AXI_PROT_EN_STA1 0x228
+#define MT8192_TOP_AXI_PROT_EN_1_STA1 0x258
+#define MT8192_TOP_AXI_PROT_EN_SET 0x2a0
+#define MT8192_TOP_AXI_PROT_EN_CLR 0x2a4
+#define MT8192_TOP_AXI_PROT_EN_1_SET 0x2a8
+#define MT8192_TOP_AXI_PROT_EN_1_CLR 0x2ac
+#define MT8192_TOP_AXI_PROT_EN_MM_SET 0x2d4
+#define MT8192_TOP_AXI_PROT_EN_MM_CLR 0x2d8
+#define MT8192_TOP_AXI_PROT_EN_MM_STA1 0x2ec
+#define MT8192_TOP_AXI_PROT_EN_2_SET 0x714
+#define MT8192_TOP_AXI_PROT_EN_2_CLR 0x718
+#define MT8192_TOP_AXI_PROT_EN_2_STA1 0x724
+#define MT8192_TOP_AXI_PROT_EN_VDNR_SET 0xb84
+#define MT8192_TOP_AXI_PROT_EN_VDNR_CLR 0xb88
+#define MT8192_TOP_AXI_PROT_EN_VDNR_STA1 0xb90
+#define MT8192_TOP_AXI_PROT_EN_MM_2_SET 0xdcc
+#define MT8192_TOP_AXI_PROT_EN_MM_2_CLR 0xdd0
+#define MT8192_TOP_AXI_PROT_EN_MM_2_STA1 0xdd8
+
+#define MT8192_TOP_AXI_PROT_EN_DISP (BIT(6) | BIT(23))
+#define MT8192_TOP_AXI_PROT_EN_CONN (BIT(13) | BIT(18))
+#define MT8192_TOP_AXI_PROT_EN_CONN_2ND BIT(14)
+#define MT8192_TOP_AXI_PROT_EN_MFG1 GENMASK(22, 21)
+#define MT8192_TOP_AXI_PROT_EN_1_CONN BIT(10)
+#define MT8192_TOP_AXI_PROT_EN_1_MFG1 BIT(21)
+#define MT8192_TOP_AXI_PROT_EN_1_CAM BIT(22)
+#define MT8192_TOP_AXI_PROT_EN_2_CAM BIT(0)
+#define MT8192_TOP_AXI_PROT_EN_2_ADSP BIT(3)
+#define MT8192_TOP_AXI_PROT_EN_2_AUDIO BIT(4)
+#define MT8192_TOP_AXI_PROT_EN_2_MFG1 GENMASK(6, 5)
+#define MT8192_TOP_AXI_PROT_EN_2_MFG1_2ND BIT(7)
+#define MT8192_TOP_AXI_PROT_EN_MM_CAM (BIT(0) | BIT(2))
+#define MT8192_TOP_AXI_PROT_EN_MM_DISP (BIT(0) | BIT(2) | \
+ BIT(10) | BIT(12) | \
+ BIT(14) | BIT(16) | \
+ BIT(24) | BIT(26))
+#define MT8192_TOP_AXI_PROT_EN_MM_CAM_2ND (BIT(1) | BIT(3))
+#define MT8192_TOP_AXI_PROT_EN_MM_DISP_2ND (BIT(1) | BIT(3) | \
+ BIT(15) | BIT(17) | \
+ BIT(25) | BIT(27))
+#define MT8192_TOP_AXI_PROT_EN_MM_ISP2 BIT(14)
+#define MT8192_TOP_AXI_PROT_EN_MM_ISP2_2ND BIT(15)
+#define MT8192_TOP_AXI_PROT_EN_MM_IPE BIT(16)
+#define MT8192_TOP_AXI_PROT_EN_MM_IPE_2ND BIT(17)
+#define MT8192_TOP_AXI_PROT_EN_MM_VDEC BIT(24)
+#define MT8192_TOP_AXI_PROT_EN_MM_VDEC_2ND BIT(25)
+#define MT8192_TOP_AXI_PROT_EN_MM_VENC BIT(26)
+#define MT8192_TOP_AXI_PROT_EN_MM_VENC_2ND BIT(27)
+#define MT8192_TOP_AXI_PROT_EN_MM_2_ISP BIT(8)
+#define MT8192_TOP_AXI_PROT_EN_MM_2_DISP (BIT(8) | BIT(12))
+#define MT8192_TOP_AXI_PROT_EN_MM_2_ISP_2ND BIT(9)
+#define MT8192_TOP_AXI_PROT_EN_MM_2_DISP_2ND (BIT(9) | BIT(13))
+#define MT8192_TOP_AXI_PROT_EN_MM_2_MDP BIT(12)
+#define MT8192_TOP_AXI_PROT_EN_MM_2_MDP_2ND BIT(13)
+#define MT8192_TOP_AXI_PROT_EN_VDNR_CAM BIT(21)
+
#define MT8183_TOP_AXI_PROT_EN_STA1 0x228
#define MT8183_TOP_AXI_PROT_EN_STA1_1 0x258
#define MT8183_TOP_AXI_PROT_EN_SET 0x2a0
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 23+ messages in thread* Re: [PATCH v4 16/16] soc: mediatek: pm-domains: Add support for mt8192
2020-10-30 11:36 ` [PATCH v4 16/16] soc: mediatek: pm-domains: Add support for mt8192 Enric Balletbo i Serra
@ 2020-11-19 11:12 ` Weiyi Lu
0 siblings, 0 replies; 23+ messages in thread
From: Weiyi Lu @ 2020-11-19 11:12 UTC (permalink / raw)
To: Enric Balletbo i Serra
Cc: drinkcat, linux-kernel, fparent, Miles Chen, Joerg Roedel,
linux-mediatek, hsinyi, matthias.bgg, Collabora Kernel ML,
linux-arm-kernel
On Fri, 2020-10-30 at 12:36 +0100, Enric Balletbo i Serra wrote:
> From: Weiyi Lu <weiyi.lu@mediatek.com>
>
> Add the needed board data to support mt8192 SoC.
>
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
Hi Enric,
I've verified with my dts v3[1] on MT8192 EVB, so
Tested-by: Weiyi Lu <weiyi.lu@mediatek.com>
[1]
https://patchwork.kernel.org/project/linux-mediatek/list/?series=387453
> Changes in v4:
> - Adapt scpsys_soc_data struct to the changes done in previous patches.
>
> Changes in v3: None
> Changes in v2: None
>
> drivers/soc/mediatek/mt8192-pm-domains.h | 292 +++++++++++++++++++++++
> drivers/soc/mediatek/mtk-pm-domains.c | 5 +
> include/linux/soc/mediatek/infracfg.h | 56 +++++
> 3 files changed, 353 insertions(+)
> create mode 100644 drivers/soc/mediatek/mt8192-pm-domains.h
>
> diff --git a/drivers/soc/mediatek/mt8192-pm-domains.h b/drivers/soc/mediatek/mt8192-pm-domains.h
> new file mode 100644
> index 000000000000..0fdf6dc6231f
> --- /dev/null
> +++ b/drivers/soc/mediatek/mt8192-pm-domains.h
> @@ -0,0 +1,292 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +
> +#ifndef __SOC_MEDIATEK_MT8192_PM_DOMAINS_H
> +#define __SOC_MEDIATEK_MT8192_PM_DOMAINS_H
> +
> +#include "mtk-pm-domains.h"
> +#include <dt-bindings/power/mt8192-power.h>
> +
> +/*
> + * MT8192 power domain support
> + */
> +
> +static const struct scpsys_domain_data scpsys_domain_data_mt8192[] = {
> + [MT8192_POWER_DOMAIN_AUDIO] = {
> + .sta_mask = BIT(21),
> + .ctl_offs = 0x0354,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + .bp_infracfg = {
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_2_AUDIO,
> + MT8192_TOP_AXI_PROT_EN_2_SET,
> + MT8192_TOP_AXI_PROT_EN_2_CLR,
> + MT8192_TOP_AXI_PROT_EN_2_STA1),
> + },
> + },
> + [MT8192_POWER_DOMAIN_CONN] = {
> + .sta_mask = PWR_STATUS_CONN,
> + .ctl_offs = 0x0304,
> + .sram_pdn_bits = 0,
> + .sram_pdn_ack_bits = 0,
> + .bp_infracfg = {
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_CONN,
> + MT8192_TOP_AXI_PROT_EN_SET,
> + MT8192_TOP_AXI_PROT_EN_CLR,
> + MT8192_TOP_AXI_PROT_EN_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_CONN_2ND,
> + MT8192_TOP_AXI_PROT_EN_SET,
> + MT8192_TOP_AXI_PROT_EN_CLR,
> + MT8192_TOP_AXI_PROT_EN_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_1_CONN,
> + MT8192_TOP_AXI_PROT_EN_1_SET,
> + MT8192_TOP_AXI_PROT_EN_1_CLR,
> + MT8192_TOP_AXI_PROT_EN_1_STA1),
> + },
> + .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
> + },
> + [MT8192_POWER_DOMAIN_MFG0] = {
> + .sta_mask = BIT(2),
> + .ctl_offs = 0x0308,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + },
> + [MT8192_POWER_DOMAIN_MFG1] = {
> + .sta_mask = BIT(3),
> + .ctl_offs = 0x030c,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + .bp_infracfg = {
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_1_MFG1,
> + MT8192_TOP_AXI_PROT_EN_1_SET,
> + MT8192_TOP_AXI_PROT_EN_1_CLR,
> + MT8192_TOP_AXI_PROT_EN_1_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_2_MFG1,
> + MT8192_TOP_AXI_PROT_EN_2_SET,
> + MT8192_TOP_AXI_PROT_EN_2_CLR,
> + MT8192_TOP_AXI_PROT_EN_2_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MFG1,
> + MT8192_TOP_AXI_PROT_EN_SET,
> + MT8192_TOP_AXI_PROT_EN_CLR,
> + MT8192_TOP_AXI_PROT_EN_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_2_MFG1_2ND,
> + MT8192_TOP_AXI_PROT_EN_2_SET,
> + MT8192_TOP_AXI_PROT_EN_2_CLR,
> + MT8192_TOP_AXI_PROT_EN_2_STA1),
> + },
> + },
> + [MT8192_POWER_DOMAIN_MFG2] = {
> + .sta_mask = BIT(4),
> + .ctl_offs = 0x0310,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + },
> + [MT8192_POWER_DOMAIN_MFG3] = {
> + .sta_mask = BIT(5),
> + .ctl_offs = 0x0314,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + },
> + [MT8192_POWER_DOMAIN_MFG4] = {
> + .sta_mask = BIT(6),
> + .ctl_offs = 0x0318,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + },
> + [MT8192_POWER_DOMAIN_MFG5] = {
> + .sta_mask = BIT(7),
> + .ctl_offs = 0x031c,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + },
> + [MT8192_POWER_DOMAIN_MFG6] = {
> + .sta_mask = BIT(8),
> + .ctl_offs = 0x0320,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + },
> + [MT8192_POWER_DOMAIN_DISP] = {
> + .sta_mask = BIT(20),
> + .ctl_offs = 0x0350,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + .bp_infracfg = {
> + BUS_PROT_WR_IGN(MT8192_TOP_AXI_PROT_EN_MM_DISP,
> + MT8192_TOP_AXI_PROT_EN_MM_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_STA1),
> + BUS_PROT_WR_IGN(MT8192_TOP_AXI_PROT_EN_MM_2_DISP,
> + MT8192_TOP_AXI_PROT_EN_MM_2_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_2_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_2_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_DISP,
> + MT8192_TOP_AXI_PROT_EN_SET,
> + MT8192_TOP_AXI_PROT_EN_CLR,
> + MT8192_TOP_AXI_PROT_EN_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_DISP_2ND,
> + MT8192_TOP_AXI_PROT_EN_MM_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_2_DISP_2ND,
> + MT8192_TOP_AXI_PROT_EN_MM_2_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_2_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_2_STA1),
> + },
> + },
> + [MT8192_POWER_DOMAIN_IPE] = {
> + .sta_mask = BIT(14),
> + .ctl_offs = 0x0338,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + .bp_infracfg = {
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_IPE,
> + MT8192_TOP_AXI_PROT_EN_MM_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_IPE_2ND,
> + MT8192_TOP_AXI_PROT_EN_MM_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_STA1),
> + },
> + },
> + [MT8192_POWER_DOMAIN_ISP] = {
> + .sta_mask = BIT(12),
> + .ctl_offs = 0x0330,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + .bp_infracfg = {
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_2_ISP,
> + MT8192_TOP_AXI_PROT_EN_MM_2_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_2_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_2_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_2_ISP_2ND,
> + MT8192_TOP_AXI_PROT_EN_MM_2_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_2_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_2_STA1),
> + },
> + },
> + [MT8192_POWER_DOMAIN_ISP2] = {
> + .sta_mask = BIT(13),
> + .ctl_offs = 0x0334,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + .bp_infracfg = {
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_ISP2,
> + MT8192_TOP_AXI_PROT_EN_MM_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_ISP2_2ND,
> + MT8192_TOP_AXI_PROT_EN_MM_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_STA1),
> + },
> + },
> + [MT8192_POWER_DOMAIN_MDP] = {
> + .sta_mask = BIT(19),
> + .ctl_offs = 0x034c,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + .bp_infracfg = {
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_2_MDP,
> + MT8192_TOP_AXI_PROT_EN_MM_2_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_2_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_2_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_2_MDP_2ND,
> + MT8192_TOP_AXI_PROT_EN_MM_2_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_2_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_2_STA1),
> + },
> + },
> + [MT8192_POWER_DOMAIN_VENC] = {
> + .sta_mask = BIT(17),
> + .ctl_offs = 0x0344,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + .bp_infracfg = {
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_VENC,
> + MT8192_TOP_AXI_PROT_EN_MM_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_VENC_2ND,
> + MT8192_TOP_AXI_PROT_EN_MM_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_STA1),
> + },
> + },
> + [MT8192_POWER_DOMAIN_VDEC] = {
> + .sta_mask = BIT(15),
> + .ctl_offs = 0x033c,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + .bp_infracfg = {
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_VDEC,
> + MT8192_TOP_AXI_PROT_EN_MM_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_VDEC_2ND,
> + MT8192_TOP_AXI_PROT_EN_MM_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_STA1),
> + },
> + },
> + [MT8192_POWER_DOMAIN_VDEC2] = {
> + .sta_mask = BIT(16),
> + .ctl_offs = 0x0340,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + },
> + [MT8192_POWER_DOMAIN_CAM] = {
> + .sta_mask = BIT(23),
> + .ctl_offs = 0x035c,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + .bp_infracfg = {
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_2_CAM,
> + MT8192_TOP_AXI_PROT_EN_2_SET,
> + MT8192_TOP_AXI_PROT_EN_2_CLR,
> + MT8192_TOP_AXI_PROT_EN_2_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_CAM,
> + MT8192_TOP_AXI_PROT_EN_MM_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_1_CAM,
> + MT8192_TOP_AXI_PROT_EN_1_SET,
> + MT8192_TOP_AXI_PROT_EN_1_CLR,
> + MT8192_TOP_AXI_PROT_EN_1_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_MM_CAM_2ND,
> + MT8192_TOP_AXI_PROT_EN_MM_SET,
> + MT8192_TOP_AXI_PROT_EN_MM_CLR,
> + MT8192_TOP_AXI_PROT_EN_MM_STA1),
> + BUS_PROT_WR(MT8192_TOP_AXI_PROT_EN_VDNR_CAM,
> + MT8192_TOP_AXI_PROT_EN_VDNR_SET,
> + MT8192_TOP_AXI_PROT_EN_VDNR_CLR,
> + MT8192_TOP_AXI_PROT_EN_VDNR_STA1),
> + },
> + },
> + [MT8192_POWER_DOMAIN_CAM_RAWA] = {
> + .sta_mask = BIT(24),
> + .ctl_offs = 0x0360,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + },
> + [MT8192_POWER_DOMAIN_CAM_RAWB] = {
> + .sta_mask = BIT(25),
> + .ctl_offs = 0x0364,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + },
> + [MT8192_POWER_DOMAIN_CAM_RAWC] = {
> + .sta_mask = BIT(26),
> + .ctl_offs = 0x0368,
> + .sram_pdn_bits = GENMASK(8, 8),
> + .sram_pdn_ack_bits = GENMASK(12, 12),
> + },
> +};
> +
> +static const struct scpsys_soc_data mt8192_scpsys_data = {
> + .domains_data = scpsys_domain_data_mt8192,
> + .num_domains = ARRAY_SIZE(scpsys_domain_data_mt8192),
> + .pwr_sta_offs = 0x016c,
> + .pwr_sta2nd_offs = 0x0170,
> +};
> +
> +#endif /* __SOC_MEDIATEK_MT8192_PM_DOMAINS_H */
> diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
> index c3b85b69f2f7..fb70cb3b07b3 100644
> --- a/drivers/soc/mediatek/mtk-pm-domains.c
> +++ b/drivers/soc/mediatek/mtk-pm-domains.c
> @@ -17,6 +17,7 @@
>
> #include "mt8173-pm-domains.h"
> #include "mt8183-pm-domains.h"
> +#include "mt8192-pm-domains.h"
>
> #define MTK_POLL_DELAY_US 10
> #define MTK_POLL_TIMEOUT USEC_PER_SEC
> @@ -521,6 +522,10 @@ static const struct of_device_id scpsys_of_match[] = {
> .compatible = "mediatek,mt8183-power-controller",
> .data = &mt8183_scpsys_data,
> },
> + {
> + .compatible = "mediatek,mt8192-power-controller",
> + .data = &mt8192_scpsys_data,
> + },
> { }
> };
>
> diff --git a/include/linux/soc/mediatek/infracfg.h b/include/linux/soc/mediatek/infracfg.h
> index 9d01e32e19bc..e7842debc05d 100644
> --- a/include/linux/soc/mediatek/infracfg.h
> +++ b/include/linux/soc/mediatek/infracfg.h
> @@ -2,6 +2,62 @@
> #ifndef __SOC_MEDIATEK_INFRACFG_H
> #define __SOC_MEDIATEK_INFRACFG_H
>
> +#define MT8192_TOP_AXI_PROT_EN_STA1 0x228
> +#define MT8192_TOP_AXI_PROT_EN_1_STA1 0x258
> +#define MT8192_TOP_AXI_PROT_EN_SET 0x2a0
> +#define MT8192_TOP_AXI_PROT_EN_CLR 0x2a4
> +#define MT8192_TOP_AXI_PROT_EN_1_SET 0x2a8
> +#define MT8192_TOP_AXI_PROT_EN_1_CLR 0x2ac
> +#define MT8192_TOP_AXI_PROT_EN_MM_SET 0x2d4
> +#define MT8192_TOP_AXI_PROT_EN_MM_CLR 0x2d8
> +#define MT8192_TOP_AXI_PROT_EN_MM_STA1 0x2ec
> +#define MT8192_TOP_AXI_PROT_EN_2_SET 0x714
> +#define MT8192_TOP_AXI_PROT_EN_2_CLR 0x718
> +#define MT8192_TOP_AXI_PROT_EN_2_STA1 0x724
> +#define MT8192_TOP_AXI_PROT_EN_VDNR_SET 0xb84
> +#define MT8192_TOP_AXI_PROT_EN_VDNR_CLR 0xb88
> +#define MT8192_TOP_AXI_PROT_EN_VDNR_STA1 0xb90
> +#define MT8192_TOP_AXI_PROT_EN_MM_2_SET 0xdcc
> +#define MT8192_TOP_AXI_PROT_EN_MM_2_CLR 0xdd0
> +#define MT8192_TOP_AXI_PROT_EN_MM_2_STA1 0xdd8
> +
> +#define MT8192_TOP_AXI_PROT_EN_DISP (BIT(6) | BIT(23))
> +#define MT8192_TOP_AXI_PROT_EN_CONN (BIT(13) | BIT(18))
> +#define MT8192_TOP_AXI_PROT_EN_CONN_2ND BIT(14)
> +#define MT8192_TOP_AXI_PROT_EN_MFG1 GENMASK(22, 21)
> +#define MT8192_TOP_AXI_PROT_EN_1_CONN BIT(10)
> +#define MT8192_TOP_AXI_PROT_EN_1_MFG1 BIT(21)
> +#define MT8192_TOP_AXI_PROT_EN_1_CAM BIT(22)
> +#define MT8192_TOP_AXI_PROT_EN_2_CAM BIT(0)
> +#define MT8192_TOP_AXI_PROT_EN_2_ADSP BIT(3)
> +#define MT8192_TOP_AXI_PROT_EN_2_AUDIO BIT(4)
> +#define MT8192_TOP_AXI_PROT_EN_2_MFG1 GENMASK(6, 5)
> +#define MT8192_TOP_AXI_PROT_EN_2_MFG1_2ND BIT(7)
> +#define MT8192_TOP_AXI_PROT_EN_MM_CAM (BIT(0) | BIT(2))
> +#define MT8192_TOP_AXI_PROT_EN_MM_DISP (BIT(0) | BIT(2) | \
> + BIT(10) | BIT(12) | \
> + BIT(14) | BIT(16) | \
> + BIT(24) | BIT(26))
> +#define MT8192_TOP_AXI_PROT_EN_MM_CAM_2ND (BIT(1) | BIT(3))
> +#define MT8192_TOP_AXI_PROT_EN_MM_DISP_2ND (BIT(1) | BIT(3) | \
> + BIT(15) | BIT(17) | \
> + BIT(25) | BIT(27))
> +#define MT8192_TOP_AXI_PROT_EN_MM_ISP2 BIT(14)
> +#define MT8192_TOP_AXI_PROT_EN_MM_ISP2_2ND BIT(15)
> +#define MT8192_TOP_AXI_PROT_EN_MM_IPE BIT(16)
> +#define MT8192_TOP_AXI_PROT_EN_MM_IPE_2ND BIT(17)
> +#define MT8192_TOP_AXI_PROT_EN_MM_VDEC BIT(24)
> +#define MT8192_TOP_AXI_PROT_EN_MM_VDEC_2ND BIT(25)
> +#define MT8192_TOP_AXI_PROT_EN_MM_VENC BIT(26)
> +#define MT8192_TOP_AXI_PROT_EN_MM_VENC_2ND BIT(27)
> +#define MT8192_TOP_AXI_PROT_EN_MM_2_ISP BIT(8)
> +#define MT8192_TOP_AXI_PROT_EN_MM_2_DISP (BIT(8) | BIT(12))
> +#define MT8192_TOP_AXI_PROT_EN_MM_2_ISP_2ND BIT(9)
> +#define MT8192_TOP_AXI_PROT_EN_MM_2_DISP_2ND (BIT(9) | BIT(13))
> +#define MT8192_TOP_AXI_PROT_EN_MM_2_MDP BIT(12)
> +#define MT8192_TOP_AXI_PROT_EN_MM_2_MDP_2ND BIT(13)
> +#define MT8192_TOP_AXI_PROT_EN_VDNR_CAM BIT(21)
> +
> #define MT8183_TOP_AXI_PROT_EN_STA1 0x228
> #define MT8183_TOP_AXI_PROT_EN_STA1_1 0x258
> #define MT8183_TOP_AXI_PROT_EN_SET 0x2a0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller
2020-10-30 11:36 [PATCH v4 00/16] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
` (15 preceding siblings ...)
2020-10-30 11:36 ` [PATCH v4 16/16] soc: mediatek: pm-domains: Add support for mt8192 Enric Balletbo i Serra
@ 2020-11-27 11:19 ` Matthias Brugger
16 siblings, 0 replies; 23+ messages in thread
From: Matthias Brugger @ 2020-11-27 11:19 UTC (permalink / raw)
To: Enric Balletbo i Serra, linux-kernel
Cc: devicetree, Joerg Roedel, weiyi.lu, Rob Herring, fparent,
Miles Chen, drinkcat, linux-mediatek, hsinyi,
Collabora Kernel ML, linux-arm-kernel
On 30/10/2020 12:36, Enric Balletbo i Serra wrote:
> Dear all,
>
> This is a new driver with the aim to deprecate the mtk-scpsys driver.
> The problem with that driver is that, in order to support more Mediatek
> SoCs you need to add some logic to handle properly the power-up
> sequence of newer Mediatek SoCs, doesn't handle parent-child power
> domains and need to hardcode all the clocks in the driver itself. The
> result is that the driver is getting bigger and bigger every time a
> new SoC needs to be supported.
>
> All this information can be getted from a properly defined binding, so
> can be cleaner and smaller, hence, we implemented a new driver. For
> now, only MT8173 and MT8183 is supported but should be fairly easy to
> add support for new SoCs.
>
All patches are pushed:
DT-bindings went to v5.10-next/pm-domains-stable as they are needed by both soc
and dts64 branch.
Regards,
Matthias
> Three important notes:
>
> 1. This patch depends now on [1] to build correctly.
>
> 2. Support for MT8183 is not ready to land yet because has some
> dependencies, i.e mmsys support is still missing.
>
> 3. Support for MT8192. I picked the patches [2] from Weiyi Lu and
> adapted to this new series. I posted only for reference due that this
> new version has some changes that affects that patchset.
>
> Only patches from 1 to 9 are ready, the others are provided for reference and test.
>
> [1] https://lore.kernel.org/patchwork/patch/1328096/
> [2] https://patchwork.kernel.org/project/linux-mediatek/list/?series=368821
>
> Best regards,
> Enric
>
> Enric Balletbo i Serra (5):
> dt-bindings: power: Add bindings for the Mediatek SCPSYS power domains
> controller
> soc: mediatek: Add MediaTek SCPSYS power domains
> arm64: dts: mediatek: Add mt8173 power domain controller
> dt-bindings: power: Add MT8183 power domains
> arm64: dts: mediatek: Add smi_common node for MT8183
>
> Matthias Brugger (8):
> soc: mediatek: pm-domains: Add bus protection protocol
> soc: mediatek: pm_domains: Make bus protection generic
> soc: mediatek: pm-domains: Add SMI block as bus protection block
> soc: mediatek: pm-domains: Add extra sram control
> soc: mediatek: pm-domains: Add subsystem clocks
> soc: mediatek: pm-domains: Allow bus protection to ignore clear ack
> soc: mediatek: pm-domains: Add support for mt8183
> arm64: dts: mediatek: Add mt8183 power domains controller
>
> Weiyi Lu (3):
> dt-bindings: power: Add MT8192 power domains
> soc: mediatek: pm-domains: Add default power off flag
> soc: mediatek: pm-domains: Add support for mt8192
>
> .../power/mediatek,power-controller.yaml | 293 +++++++++
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 164 +++--
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 172 +++++
> drivers/soc/mediatek/Kconfig | 12 +
> drivers/soc/mediatek/Makefile | 1 +
> drivers/soc/mediatek/mt8173-pm-domains.h | 94 +++
> drivers/soc/mediatek/mt8183-pm-domains.h | 221 +++++++
> drivers/soc/mediatek/mt8192-pm-domains.h | 292 +++++++++
> drivers/soc/mediatek/mtk-infracfg.c | 5 -
> drivers/soc/mediatek/mtk-pm-domains.c | 614 ++++++++++++++++++
> drivers/soc/mediatek/mtk-pm-domains.h | 102 +++
> include/dt-bindings/power/mt8183-power.h | 26 +
> include/dt-bindings/power/mt8192-power.h | 32 +
> include/linux/soc/mediatek/infracfg.h | 107 +++
> 14 files changed, 2081 insertions(+), 54 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> create mode 100644 drivers/soc/mediatek/mt8173-pm-domains.h
> create mode 100644 drivers/soc/mediatek/mt8183-pm-domains.h
> create mode 100644 drivers/soc/mediatek/mt8192-pm-domains.h
> create mode 100644 drivers/soc/mediatek/mtk-pm-domains.c
> create mode 100644 drivers/soc/mediatek/mtk-pm-domains.h
> create mode 100644 include/dt-bindings/power/mt8183-power.h
> create mode 100644 include/dt-bindings/power/mt8192-power.h
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 23+ messages in thread