[PATCH AUTOSEL 5.10 034/217] scsi: ufs: Allow an error return value from ->device_reset()

[PATCH AUTOSEL 5.10 034/217] scsi: ufs: Allow an error return value from ->device_reset()

[Sasha Levin]

From: Adrian Hunter <adrian.hunter@intel.com>

[ Upstream commit 151f1b664ffbb847c7fbbce5a5b8580f1b9b1d98 ]

It is simpler for drivers to provide a ->device_reset() callback
irrespective of whether the GPIO, or firmware interface necessary to do the
reset, is discovered during probe.

Change ->device_reset() to return an error code.  Drivers that provide the
callback, but do not do the reset operation should return -EOPNOTSUPP.

Link: https://lore.kernel.org/r/20201103141403.2142-3-adrian.hunter@intel.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bean huo <beanhuo@micron.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufs-mediatek.c |  4 +++-
 drivers/scsi/ufs/ufs-qcom.c     |  6 ++++--
 drivers/scsi/ufs/ufshcd.h       | 11 +++++++----
 3 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 8df73bc2f8cb2..914a827a93ee8 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -743,7 +743,7 @@ static int ufs_mtk_link_startup_notify(struct ufs_hba *hba,
 	return ret;
 }
 
-static void ufs_mtk_device_reset(struct ufs_hba *hba)
+static int ufs_mtk_device_reset(struct ufs_hba *hba)
 {
 	struct arm_smccc_res res;
 
@@ -764,6 +764,8 @@ static void ufs_mtk_device_reset(struct ufs_hba *hba)
 	usleep_range(10000, 15000);
 
 	dev_info(hba->dev, "device reset done\n");
+
+	return 0;
 }
 
 static int ufs_mtk_link_set_hpm(struct ufs_hba *hba)
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index f9d6ef3565407..a244c8ae1b4eb 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -1421,13 +1421,13 @@ static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba)
  *
  * Toggles the (optional) reset line to reset the attached device.
  */
-static void ufs_qcom_device_reset(struct ufs_hba *hba)
+static int ufs_qcom_device_reset(struct ufs_hba *hba)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 
 	/* reset gpio is optional */
 	if (!host->device_reset)
-		return;
+		return -EOPNOTSUPP;
 
 	/*
 	 * The UFS device shall detect reset pulses of 1us, sleep for 10us to
@@ -1438,6 +1438,8 @@ static void ufs_qcom_device_reset(struct ufs_hba *hba)
 
 	gpiod_set_value_cansleep(host->device_reset, 0);
 	usleep_range(10, 15);
+
+	return 0;
 }
 
 #if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND)
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index e0f00a42371c5..de97971e2d865 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -318,7 +318,7 @@ struct ufs_hba_variant_ops {
 	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
 	void	(*dbg_register_dump)(struct ufs_hba *hba);
 	int	(*phy_initialization)(struct ufs_hba *);
-	void	(*device_reset)(struct ufs_hba *hba);
+	int	(*device_reset)(struct ufs_hba *hba);
 	void	(*config_scaling_param)(struct ufs_hba *hba,
 					struct devfreq_dev_profile *profile,
 					void *data);
@@ -1181,9 +1181,12 @@ static inline void ufshcd_vops_dbg_register_dump(struct ufs_hba *hba)
 static inline void ufshcd_vops_device_reset(struct ufs_hba *hba)
 {
 	if (hba->vops && hba->vops->device_reset) {
-		hba->vops->device_reset(hba);
-		ufshcd_set_ufs_dev_active(hba);
-		ufshcd_update_reg_hist(&hba->ufs_stats.dev_reset, 0);
+		int err = hba->vops->device_reset(hba);
+
+		if (!err)
+			ufshcd_set_ufs_dev_active(hba);
+		if (err != -EOPNOTSUPP)
+			ufshcd_update_reg_hist(&hba->ufs_stats.dev_reset, err);
 	}
 }
 
-- 
2.27.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.10 066/217] ASoC: Fix vaud18 power leakage of mt6359

[Sasha Levin]

From: "Shane.Chien" <shane.chien@mediatek.com>

[ Upstream commit 64a70744b77898a15d7a5b2b4dc0fa9523a75cde ]

vaud18 is power of mt6359 audio path. It
should only enable when audio is used,
instead of in boot up stage.
Once mt6359 audio path is enabled or disabled,
vaud18 is controlled by regulator supply widget
"LDO_VAUD18". Due to vaud18 is controlled by
regulator dapm macro instead of regmap, the macro
MT6359_LDO_VAUD18_CON0 and variable avdd_reg
is no used and removed from mt6359.h.

Signed-off-by: Shane.Chien <shane.chien@mediatek.com>
Link: https://lore.kernel.org/r/1604975492-6142-2-git-send-email-shane.chien@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/mt6359.c | 25 +------------------------
 sound/soc/codecs/mt6359.h |  8 --------
 2 files changed, 1 insertion(+), 32 deletions(-)

diff --git a/sound/soc/codecs/mt6359.c b/sound/soc/codecs/mt6359.c
index 81aafb553bdd9..64b26ab969ed8 100644
--- a/sound/soc/codecs/mt6359.c
+++ b/sound/soc/codecs/mt6359.c
@@ -1833,9 +1833,7 @@ static const struct snd_soc_dapm_widget mt6359_dapm_widgets[] = {
 	SND_SOC_DAPM_SUPPLY_S("CLK_BUF", SUPPLY_SEQ_CLK_BUF,
 			      MT6359_DCXO_CW12,
 			      RG_XO_AUDIO_EN_M_SFT, 0, NULL, 0),
-	SND_SOC_DAPM_SUPPLY_S("LDO_VAUD18", SUPPLY_SEQ_LDO_VAUD18,
-			      MT6359_LDO_VAUD18_CON0,
-			      RG_LDO_VAUD18_EN_SFT, 0, NULL, 0),
+	SND_SOC_DAPM_REGULATOR_SUPPLY("LDO_VAUD18", 0, 0),
 	SND_SOC_DAPM_SUPPLY_S("AUDGLB", SUPPLY_SEQ_AUD_GLB,
 			      MT6359_AUDDEC_ANA_CON13,
 			      RG_AUDGLB_PWRDN_VA32_SFT, 1, NULL, 0),
@@ -2697,20 +2695,6 @@ static int mt6359_platform_driver_probe(struct platform_device *pdev)
 	dev_set_drvdata(&pdev->dev, priv);
 	priv->dev = &pdev->dev;
 
-	priv->avdd_reg = devm_regulator_get(&pdev->dev, "vaud18");
-	if (IS_ERR(priv->avdd_reg)) {
-		dev_err(&pdev->dev, "%s(), have no vaud18 supply: %ld",
-			__func__, PTR_ERR(priv->avdd_reg));
-		return PTR_ERR(priv->avdd_reg);
-	}
-
-	ret = regulator_enable(priv->avdd_reg);
-	if (ret) {
-		dev_err(&pdev->dev, "%s(), failed to enable regulator!\n",
-			__func__);
-		return ret;
-	}
-
 	ret = mt6359_parse_dt(priv);
 	if (ret) {
 		dev_warn(&pdev->dev, "%s() failed to parse dts\n", __func__);
@@ -2731,13 +2715,6 @@ static int mt6359_platform_driver_remove(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "%s(), dev name %s\n",
 		__func__, dev_name(&pdev->dev));
 
-	ret = regulator_disable(priv->avdd_reg);
-	if (ret) {
-		dev_err(&pdev->dev, "%s(), failed to disable regulator!\n",
-			__func__);
-		return ret;
-	}
-
 	return 0;
 }
 
diff --git a/sound/soc/codecs/mt6359.h b/sound/soc/codecs/mt6359.h
index 3792e534a91b6..e0aebf639e461 100644
--- a/sound/soc/codecs/mt6359.h
+++ b/sound/soc/codecs/mt6359.h
@@ -135,11 +135,6 @@
 /* MT6359_DCXO_CW12 */
 #define RG_XO_AUDIO_EN_M_SFT				13
 
-/* LDO_VAUD18_CON0 */
-#define RG_LDO_VAUD18_EN_SFT				0
-#define RG_LDO_VAUD18_EN_MASK				0x1
-#define RG_LDO_VAUD18_EN_MASK_SFT			(0x1 << 0)
-
 /* AUD_TOP_CKPDN_CON0 */
 #define RG_VOW13M_CK_PDN_SFT				13
 #define RG_VOW13M_CK_PDN_MASK				0x1
@@ -2132,7 +2127,6 @@
 
 #define MT6359_DCXO_CW11				0x7a6
 #define MT6359_DCXO_CW12				0x7a8
-#define MT6359_LDO_VAUD18_CON0				0x1c98
 
 #define MT6359_GPIO_MODE0				0xcc
 #define MT6359_GPIO_MODE0_SET				0xce
@@ -2469,7 +2463,6 @@ enum {
 enum {
 	/* common */
 	SUPPLY_SEQ_CLK_BUF,
-	SUPPLY_SEQ_LDO_VAUD18,
 	SUPPLY_SEQ_AUD_GLB,
 	SUPPLY_SEQ_HP_PULL_DOWN,
 	SUPPLY_SEQ_CLKSQ,
@@ -2629,7 +2622,6 @@ struct mt6359_priv {
 	int hp_gain_ctl;
 	int hp_hifi_mode;
 	int mtkaif_protocol;
-	struct regulator *avdd_reg;
 };
 
 #define CODEC_MT6359_NAME "mtk-codec-mt6359"
-- 
2.27.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek