[PATCH AUTOSEL 5.10 017/137] drm/mediatek: Fix PM reference leak in mtk_crtc_ddp_hw_init()

[PATCH AUTOSEL 5.10 017/137] drm/mediatek: Fix PM reference leak in mtk_crtc_ddp_hw_init()

[Sasha Levin]

From: Wang Li <wangli74@huawei.com>

[ Upstream commit 69777e6ca396f0a7e1baff40fcad4a9d3d445b7a ]

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Li <wangli74@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index ac038572164d..dfd5ed15a7f4 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -274,7 +274,7 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
 		drm_connector_list_iter_end(&conn_iter);
 	}
 
-	ret = pm_runtime_get_sync(crtc->dev->dev);
+	ret = pm_runtime_resume_and_get(crtc->dev->dev);
 	if (ret < 0) {
 		DRM_ERROR("Failed to enable power domain: %d\n", ret);
 		return ret;
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.10 090/137] mt76: mt7615: fix fixed-rate tx status reporting

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit ec8f1a90d006f7cedcf86ef19fd034a406a213d6 ]

Rely on the txs fixed-rate bit instead of info->control.rates

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index 5795e44f8a52..f44f478bb970 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -1177,22 +1177,20 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta,
 	int first_idx = 0, last_idx;
 	int i, idx, count;
 	bool fixed_rate, ack_timeout;
-	bool probe, ampdu, cck = false;
+	bool ampdu, cck = false;
 	bool rs_idx;
 	u32 rate_set_tsf;
 	u32 final_rate, final_rate_flags, final_nss, txs;
 
-	fixed_rate = info->status.rates[0].count;
-	probe = !!(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE);
-
 	txs = le32_to_cpu(txs_data[1]);
-	ampdu = !fixed_rate && (txs & MT_TXS1_AMPDU);
+	ampdu = txs & MT_TXS1_AMPDU;
 
 	txs = le32_to_cpu(txs_data[3]);
 	count = FIELD_GET(MT_TXS3_TX_COUNT, txs);
 	last_idx = FIELD_GET(MT_TXS3_LAST_TX_RATE, txs);
 
 	txs = le32_to_cpu(txs_data[0]);
+	fixed_rate = txs & MT_TXS0_FIXED_RATE;
 	final_rate = FIELD_GET(MT_TXS0_TX_RATE, txs);
 	ack_timeout = txs & MT_TXS0_ACK_TIMEOUT;
 
@@ -1214,7 +1212,7 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta,
 
 	first_idx = max_t(int, 0, last_idx - (count - 1) / MT7615_RATE_RETRY);
 
-	if (fixed_rate && !probe) {
+	if (fixed_rate) {
 		info->status.rates[0].count = count;
 		i = 0;
 		goto out;
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.10 097/137] mt76: mt7915: fix IEEE80211_HE_PHY_CAP7_MAX_NC for station mode

[Sasha Levin]

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit 2707ff4dd7b1479dbd44ebb3c74788084cc95245 ]

The value of station mode is always 0.

Fixed: 00b2e16e0063 ("mt76: mt7915: add TxBF capabilities")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7915/init.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index 0232b66acb4f..8f01ca1694bc 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -335,6 +335,9 @@ mt7915_set_stream_he_txbf_caps(struct ieee80211_sta_he_cap *he_cap,
 	if (nss < 2)
 		return;
 
+	/* the maximum cap is 4 x 3, (Nr, Nc) = (3, 2) */
+	elem->phy_cap_info[7] |= min_t(int, nss - 1, 2) << 3;
+
 	if (vif != NL80211_IFTYPE_AP)
 		return;
 
@@ -348,9 +351,6 @@ mt7915_set_stream_he_txbf_caps(struct ieee80211_sta_he_cap *he_cap,
 	c = IEEE80211_HE_PHY_CAP6_TRIG_SU_BEAMFORMER_FB |
 	    IEEE80211_HE_PHY_CAP6_TRIG_MU_BEAMFORMER_FB;
 	elem->phy_cap_info[6] |= c;
-
-	/* the maximum cap is 4 x 3, (Nr, Nc) = (3, 2) */
-	elem->phy_cap_info[7] |= min_t(int, nss - 1, 2) << 3;
 }
 
 static void
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.10 121/137] Bluetooth: btusb: Fixed too many in-token issue for Mediatek Chip.

[Sasha Levin]

From: "mark-yw.chen" <mark-yw.chen@mediatek.com>

[ Upstream commit 8454ed9ff9647e31e061fb5eb2e39ce79bc5e960 ]

This patch reduce in-token during download patch procedure.
Don't submit urb for polling event before sending hci command.

Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index b1f0b13cc8bc..8195333e5665 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2963,11 +2963,6 @@ static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev,
 	struct btmtk_wmt_hdr *hdr;
 	int err;
 
-	/* Submit control IN URB on demand to process the WMT event */
-	err = btusb_mtk_submit_wmt_recv_urb(hdev);
-	if (err < 0)
-		return err;
-
 	/* Send the WMT command and wait until the WMT event returns */
 	hlen = sizeof(*hdr) + wmt_params->dlen;
 	if (hlen > 255)
@@ -2989,6 +2984,11 @@ static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev,
 		return err;
 	}
 
+	/* Submit control IN URB on demand to process the WMT event */
+	err = btusb_mtk_submit_wmt_recv_urb(hdev);
+	if (err < 0)
+		return err;
+
 	/* The vendor specific WMT commands are all answered by a vendor
 	 * specific event and will have the Command Status or Command
 	 * Complete as with usual HCI command flow control.
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek