linux-mediatek.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: <mark-yw.chen@mediatek.com>
To: <marcel@holtmann.org>, <johan.hedberg@gmail.com>
Cc: <sean.wang@mediatek.com>, <linux-bluetooth@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <michaelfsun@google.com>,
	<mcchou@chromium.org>, mark-yw.chen <mark-yw.chen@mediatek.com>
Subject: [PATCH 2/2] Bluetooth: btusb: Add protocol for MediaTek bluetooth devices(MT7922)
Date: Tue, 24 Aug 2021 23:44:30 +0800	[thread overview]
Message-ID: <20210824154430.27689-2-mark-yw.chen@mediatek.com> (raw)
In-Reply-To: <20210824154430.27689-1-mark-yw.chen@mediatek.com>

From: "mark-yw.chen" <mark-yw.chen@mediatek.com>

The information in /sys/kernel/debug/usb/devices about the MT7922U
Bluetooth device is listed as the below.

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0e8d ProdID=7922 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 41e7c9f28d82..fe52f7b9548e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2821,6 +2821,8 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 	case 0x7668:
 		fwname = FIRMWARE_MT7668;
 		break;
+	case 0x7922:
+		fallthrough;
 	case 0x7961:
 		snprintf(fw_bin_name, sizeof(fw_bin_name),
 			"mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

  reply	other threads:[~2021-08-24 15:45 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-24 15:44 [PATCH 1/2] Bluetooth: btusb: Support public address configuration for MediaTek Chip mark-yw.chen
2021-08-24 15:44 ` mark-yw.chen [this message]
2021-08-30 15:04   ` [PATCH 2/2] Bluetooth: btusb: Add protocol for MediaTek bluetooth devices(MT7922) Marcel Holtmann
2021-08-30 15:03 ` [PATCH 1/2] Bluetooth: btusb: Support public address configuration for MediaTek Chip Marcel Holtmann
     [not found]   ` <SL2PR03MB4457513693916CBA07BE450BB3CC9@SL2PR03MB4457.apcprd03.prod.outlook.com>
2021-08-31 12:31     ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210824154430.27689-2-mark-yw.chen@mediatek.com \
    --to=mark-yw.chen@mediatek.com \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=marcel@holtmann.org \
    --cc=mcchou@chromium.org \
    --cc=michaelfsun@google.com \
    --cc=sean.wang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).