[PATCH AUTOSEL 5.10 09/53] clk: mediatek: Fix asymmetrical PLL enable and disable control

[PATCH AUTOSEL 5.10 09/53] clk: mediatek: Fix asymmetrical PLL enable and disable control

[Sasha Levin]

From: Chun-Jie Chen <chun-jie.chen@mediatek.com>

[ Upstream commit 7cc4e1bbe300c5cf610ece8eca6c6751b8bc74db ]

In fact, the en_mask is a combination of divider enable mask
and pll enable bit(bit0).
Before this patch, we enabled both divider mask and bit0 in prepare(),
but only cleared the bit0 in unprepare().
In the future, we hope en_mask will only be used as divider enable mask.
The enable register(CON0) will be set in 2 steps:
first is divider mask, and then bit0 during prepare(), and vice versa.
But considering backward compatibility, at this stage we allow en_mask
to be a combination or a pure divider enable mask.
And then we will make en_mask a pure divider enable mask in another
following patch series.

Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-7-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/mediatek/clk-pll.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index f440f2cd0b69..11ed5d1d1c36 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -238,6 +238,7 @@ static int mtk_pll_prepare(struct clk_hw *hw)
 {
 	struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
 	u32 r;
+	u32 div_en_mask;
 
 	r = readl(pll->pwr_addr) | CON0_PWR_ON;
 	writel(r, pll->pwr_addr);
@@ -247,10 +248,15 @@ static int mtk_pll_prepare(struct clk_hw *hw)
 	writel(r, pll->pwr_addr);
 	udelay(1);
 
-	r = readl(pll->base_addr + REG_CON0);
-	r |= pll->data->en_mask;
+	r = readl(pll->base_addr + REG_CON0) | CON0_BASE_EN;
 	writel(r, pll->base_addr + REG_CON0);
 
+	div_en_mask = pll->data->en_mask & ~CON0_BASE_EN;
+	if (div_en_mask) {
+		r = readl(pll->base_addr + REG_CON0) | div_en_mask;
+		writel(r, pll->base_addr + REG_CON0);
+	}
+
 	__mtk_pll_tuner_enable(pll);
 
 	udelay(20);
@@ -268,6 +274,7 @@ static void mtk_pll_unprepare(struct clk_hw *hw)
 {
 	struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
 	u32 r;
+	u32 div_en_mask;
 
 	if (pll->data->flags & HAVE_RST_BAR) {
 		r = readl(pll->base_addr + REG_CON0);
@@ -277,8 +284,13 @@ static void mtk_pll_unprepare(struct clk_hw *hw)
 
 	__mtk_pll_tuner_disable(pll);
 
-	r = readl(pll->base_addr + REG_CON0);
-	r &= ~CON0_BASE_EN;
+	div_en_mask = pll->data->en_mask & ~CON0_BASE_EN;
+	if (div_en_mask) {
+		r = readl(pll->base_addr + REG_CON0) & ~div_en_mask;
+		writel(r, pll->base_addr + REG_CON0);
+	}
+
+	r = readl(pll->base_addr + REG_CON0) & ~CON0_BASE_EN;
 	writel(r, pll->base_addr + REG_CON0);
 
 	r = readl(pll->pwr_addr) | CON0_ISO_EN;
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.10 13/53] scsi: ufs: Verify UIC locking requirements at runtime

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 35c7d874f5993db04ce3aa310ae088f14b801eda ]

Instead of documenting the locking requirements of the UIC code as
comments, use lockdep_assert_held() such that lockdep verifies the lockdep
requirements at runtime if lockdep is enabled.

Link: https://lore.kernel.org/r/20210722033439.26550-8-bvanassche@acm.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 16 +++++++++-------
 drivers/scsi/ufs/ufshcd.h |  2 +-
 2 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 854c96e63007..b9ed7115a721 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2084,15 +2084,15 @@ static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba)
 }
 
 /**
- * ufshcd_dispatch_uic_cmd - Dispatch UIC commands to unipro layers
+ * ufshcd_dispatch_uic_cmd - Dispatch an UIC command to the Unipro layer
  * @hba: per adapter instance
  * @uic_cmd: UIC command
- *
- * Mutex must be held.
  */
 static inline void
 ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
 {
+	lockdep_assert_held(&hba->uic_cmd_mutex);
+
 	WARN_ON(hba->active_uic_cmd);
 
 	hba->active_uic_cmd = uic_cmd;
@@ -2110,11 +2110,10 @@ ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
 }
 
 /**
- * ufshcd_wait_for_uic_cmd - Wait complectioin of UIC command
+ * ufshcd_wait_for_uic_cmd - Wait for completion of an UIC command
  * @hba: per adapter instance
  * @uic_cmd: UIC command
  *
- * Must be called with mutex held.
  * Returns 0 only if success.
  */
 static int
@@ -2123,6 +2122,8 @@ ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
 	int ret;
 	unsigned long flags;
 
+	lockdep_assert_held(&hba->uic_cmd_mutex);
+
 	if (wait_for_completion_timeout(&uic_cmd->done,
 					msecs_to_jiffies(UIC_CMD_TIMEOUT))) {
 		ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT;
@@ -2152,14 +2153,15 @@ ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
  * @uic_cmd: UIC command
  * @completion: initialize the completion only if this is set to true
  *
- * Identical to ufshcd_send_uic_cmd() expect mutex. Must be called
- * with mutex held and host_lock locked.
  * Returns 0 only if success.
  */
 static int
 __ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd,
 		      bool completion)
 {
+	lockdep_assert_held(&hba->uic_cmd_mutex);
+	lockdep_assert_held(hba->host->host_lock);
+
 	if (!ufshcd_ready_for_uic_cmd(hba)) {
 		dev_err(hba->dev,
 			"Controller not ready to accept UIC commands\n");
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 812aa348751e..899a674b49fd 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -636,7 +636,7 @@ struct ufs_hba_variant_params {
  * @priv: pointer to variant specific private data
  * @irq: Irq number of the controller
  * @active_uic_cmd: handle of active UIC command
- * @uic_cmd_mutex: mutex for uic command
+ * @uic_cmd_mutex: mutex for UIC command
  * @tmf_tag_set: TMF tag set.
  * @tmf_queue: Used to allocate TMF tags.
  * @pwr_done: completion for power mode change
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek