linux-mediatek.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
To: chaotian.jing@mediatek.com
Cc: ulf.hansson@linaro.org, matthias.bgg@gmail.com,
	linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	kernel@collabora.com,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>
Subject: [PATCH 5/5] mmc: mtk-sd: Assign src_clk parent to src_clk_cg for legacy DTs
Date: Thu, 16 Dec 2021 13:57:48 +0100	[thread overview]
Message-ID: <20211216125748.179602-5-angelogioacchino.delregno@collabora.com> (raw)
In-Reply-To: <20211216125748.179602-1-angelogioacchino.delregno@collabora.com>

In commit 3c1a88443698 ("mmc: mediatek: add support of source_cg clock")
an independent cg was introduced to avoid a hardware hang issue during
clock mode switches (subsequent commits will set that clock as optional).

When this clock is not present in device-tree, any operation is being
done on src_clk's parent (calling clk_get_parent()): to simplify this
and avoid checking for src_clk_cg presence everytime, just assign the
parent clock to src_clk_cg and remove the now useless checks.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/mmc/host/mtk-sd.c | 28 ++++++++++++++++------------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 59d7decc3051..65037e1d7723 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -901,14 +901,8 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
 		}
 	}
 	sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
-	/*
-	 * As src_clk/HCLK use the same bit to gate/ungate,
-	 * So if want to only gate src_clk, need gate its parent(mux).
-	 */
-	if (host->src_clk_cg)
-		clk_disable_unprepare(host->src_clk_cg);
-	else
-		clk_disable_unprepare(clk_get_parent(host->src_clk));
+
+	clk_disable_unprepare(host->src_clk_cg);
 	if (host->dev_comp->clk_div_bits == 8)
 		sdr_set_field(host->base + MSDC_CFG,
 			      MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
@@ -917,11 +911,8 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
 		sdr_set_field(host->base + MSDC_CFG,
 			      MSDC_CFG_CKMOD_EXTRA | MSDC_CFG_CKDIV_EXTRA,
 			      (mode << 12) | div);
-	if (host->src_clk_cg)
-		clk_prepare_enable(host->src_clk_cg);
-	else
-		clk_prepare_enable(clk_get_parent(host->src_clk));
 
+	clk_prepare_enable(host->src_clk_cg);
 	readl_poll_timeout(host->base + MSDC_CFG, val, (val & MSDC_CFG_CKSTB), 0, 0);
 	sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
 	mmc->actual_clock = sclk;
@@ -2530,6 +2521,19 @@ static int msdc_of_clock_parse(struct platform_device *pdev,
 	if (IS_ERR(host->src_clk_cg))
 		return PTR_ERR(host->src_clk_cg);
 
+	/*
+	 * Fallback for legacy device-trees: src_clk and HCLK use the same
+	 * bit to control gating but they are parented to a different mux,
+	 * hence if our intention is to gate only the source, required
+	 * during a clk mode switch to avoid hw hangs, we need to gate
+	 * its parent (specified as a different clock only on new DTs).
+	 */
+	if (!host->src_clk_cg) {
+		host->src_clk_cg = clk_get_parent(host->src_clk);
+		if (IS_ERR(host->src_clk_cg))
+			return PTR_ERR(host->src_clk_cg);
+	}
+
 	host->sys_clk_cg = devm_clk_get_optional(&pdev->dev, "sys_cg");
 	if (IS_ERR(host->sys_clk_cg))
 		host->sys_clk_cg = NULL;
-- 
2.33.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

  parent reply	other threads:[~2021-12-16 13:21 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-16 12:57 [PATCH 1/5] mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling AngeloGioacchino Del Regno
2021-12-16 12:57 ` [PATCH 2/5] mmc: mtk-sd: Use BIT() and GENMASK() macros to describe fields AngeloGioacchino Del Regno
2021-12-16 12:57 ` [PATCH 3/5] mmc: mtk-sd: Take action for no-sdio device-tree parameter AngeloGioacchino Del Regno
2021-12-16 12:57 ` [PATCH 4/5] mmc: mtk-sd: Fix usage of devm_clk_get_optional() AngeloGioacchino Del Regno
2021-12-16 12:57 ` AngeloGioacchino Del Regno [this message]
2021-12-28 16:57   ` [PATCH 5/5] mmc: mtk-sd: Assign src_clk parent to src_clk_cg for legacy DTs Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211216125748.179602-5-angelogioacchino.delregno@collabora.com \
    --to=angelogioacchino.delregno@collabora.com \
    --cc=chaotian.jing@mediatek.com \
    --cc=kernel@collabora.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).