* Re: [PATCH 2/3] Bluetooth: btmtksdio: Enable SCO over I2S function
[not found] <638a2506-c410-d98c-b704-6f16f72e0bc6@molgen.mpg.de--annotate>
@ 2021-12-20 17:52 ` sean.wang
2021-12-20 18:47 ` Paul Menzel
0 siblings, 1 reply; 4+ messages in thread
From: sean.wang @ 2021-12-20 17:52 UTC (permalink / raw)
To: pmenzel
Cc: marcel, johan.hedberg, Mark-YW.Chen, sean.wang, Soul.Huang,
YN.Chen, Leon.Yen, Eric-SY.Chang, Deren.Wu, km.lin, robin.chiu,
Eddie.Chen, ch.yeh, posh.sun, ted.huang, Eric.Liang,
Stella.Chang, Tom.Chou, steve.lee, jsiuda, frankgor, jemele,
abhishekpandit, michaelfsun, mcchou, shawnku, linux-bluetooth,
linux-mediatek, linux-kernel
From: Sean Wang <sean.wang@mediatek.com>
>Dear Sean, dear Mark,
>
>
>Am 18.12.21 um 02:08 schrieb sean.wang@mediatek.com:
>> From: Mark Chen <mark-yw.chen@mediatek.com>
>>
>> For MediaTek chipset, the driver has to issue the specific command to
>> enable Bluetooth SCO support over the I2S/PCM interface.
>
>Please document the datasheet name, revision and section, where this is described.
the datasheet is not released in public so Mark and I cannot provide the detail here, but we will make the patch easy to review and understand.
>
>Please add how SCO support can be tested. Are all Mediatek chipsets supported?
the SCO profile was tested by setting up a VOIP application, connected to HFP device, checked telephony function can work normally.
currently, SCO is only supported by mt7921, we will change the subject to "Bluetooth: mt7921s: Enable SCO over I2S function" to avoid any misunderstanding.
>
>> Co-developed-by: Sean Wang <sean.wang@mediatek.com>
>> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
>> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com>
>> ---
>> drivers/bluetooth/btmtk.h | 20 +++++++++
>> drivers/bluetooth/btmtksdio.c | 76 +++++++++++++++++++++++++++++++++++
>> 2 files changed, 96 insertions(+)
>>
>> diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
>> index 2be1d2680ad8..fc57ef09d132 100644
>> --- a/drivers/bluetooth/btmtk.h
>> +++ b/drivers/bluetooth/btmtk.h
>> @@ -7,8 +7,12 @@
>>
>> #define HCI_WMT_MAX_EVENT_SIZE 64
>>
>> +#define BTMTK_WMT_REG_WRITE 0x1
>> #define BTMTK_WMT_REG_READ 0x2
>>
>> +#define MT7921_PINMUX_0 0x70005050
>> +#define MT7921_PINMUX_1 0x70005054
>> +
>> enum {
>> BTMTK_WMT_PATCH_DWNLD = 0x1,
>> BTMTK_WMT_TEST = 0x2,
>> @@ -76,6 +80,22 @@ struct btmtk_wakeon {
>> __le16 wakeup_delay;
>> } __packed;
>>
>> +struct btmtk_sco {
>> + u8 clock_config;
>> + u8 transmit_format_config;
>> + u8 channel_format_config;
>> + u8 channel_select_config;
>> +} __packed;
>> +
>> +struct reg_write_cmd {
>> + u8 type;
>> + u8 rsv;
>> + u8 num;
>> + __le32 addr;
>> + __le32 data;
>> + __le32 mask;
>> +} __packed;
>> +
>> struct btmtk_hci_wmt_params {
>> u8 op;
>> u8 flag;
>> diff --git a/drivers/bluetooth/btmtksdio.c
>> b/drivers/bluetooth/btmtksdio.c index 771733ce362b..8e4d8c2da824
>> 100644
>> --- a/drivers/bluetooth/btmtksdio.c
>> +++ b/drivers/bluetooth/btmtksdio.c
>> @@ -830,6 +830,74 @@ static int btsdio_mtk_reg_read(struct hci_dev *hdev, u32 reg, u32 *val)
>> return err;
>> }
>>
>> +static int btsdio_mtk_reg_write(struct hci_dev *hdev, u32 reg, u32
>> +val, u32 mask) {
>> + struct btmtk_hci_wmt_params wmt_params;
>> + struct reg_write_cmd reg_write = {
>> + .type = 1,
>> + .num = 1,
>> + .addr = cpu_to_le32(reg),
>> + .data = cpu_to_le32(val),
>> + .mask = cpu_to_le32(mask),
>> + };
>> + int err, status;
>> +
>> + wmt_params.op = BTMTK_WMT_REGISTER;
>> + wmt_params.flag = BTMTK_WMT_REG_WRITE;
>> + wmt_params.dlen = sizeof(reg_write);
>> + wmt_params.data = ®_write;
>> + wmt_params.status = &status;
>> +
>> + err = mtk_hci_wmt_sync(hdev, &wmt_params);
>> + if (err < 0)
>> + bt_dev_err(hdev, "Failed to write reg(%d)", err);
>> +
>> + return err;
>> +}
>> +
>> +static int btsdio_mtk_sco_setting(struct hci_dev *hdev) {
>> + struct btmtk_sco sco_setting = {
>> + .clock_config = 0x49,
>> + .channel_format_config = 0x80,
>> + };
>> + struct sk_buff *skb;
>> + u32 val;
>> + int err;
>> +
>> + /* Enable SCO over i2s/pcm for Mediatek Chipset */
>
>s/Chipset/chipset/
will do in the next version
>
>> + skb = __hci_cmd_sync(hdev, 0xfc72, sizeof(sco_setting),
>> + &sco_setting, HCI_CMD_TIMEOUT);
>> + if (IS_ERR(skb))
>> + return PTR_ERR(skb);
>> +
>> + err = btsdio_mtk_reg_read(hdev, MT7921_PINMUX_0, &val);
>> + if (err < 0) {
>> + bt_dev_err(hdev, "Failed to read register (%d)", err);
>> + return err;
>> + }
>> +
>> + val |= 0x11000000;
>> + err = btsdio_mtk_reg_write(hdev, MT7921_PINMUX_0, val, ~0);
>> + if (err < 0) {
>> + bt_dev_err(hdev, "Failed to write register (%d)", err);
>> + return err;
>> + }
>> +
>> + err = btsdio_mtk_reg_read(hdev, MT7921_PINMUX_1, &val);
>> + if (err < 0) {
>> + bt_dev_err(hdev, "Failed to read register (%d)", err);
>> + return err;
>> + }
>> +
>> + val |= 0x00000101;
>> + err = btsdio_mtk_reg_write(hdev, MT7921_PINMUX_1, val, ~0);
>> + if (err < 0)
>> + bt_dev_err(hdev, "Failed to write register (%d)", err);
>> +
>> + return err;
>> +}
>> +
>> static int btmtksdio_setup(struct hci_dev *hdev)
>> {
>> struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); @@ -862,6
>> +930,14 @@ static int btmtksdio_setup(struct hci_dev *hdev)
>> err = mt79xx_setup(hdev, fwname);
>> if (err < 0)
>> return err;
>> +
>> + /* Enable sco over i2s/pcm */
>
>s/sco/SCO/
ditto
>
>> + err = btsdio_mtk_sco_setting(hdev);
>> + if (err < 0) {
>> + bt_dev_err(hdev, "Failed to enable sco setting (%d)", err);
>
>s/sco/SCO/
ditto
>
>> + return err;
>> + }
>> +
>> break;
>> case 0x7663:
>> case 0x7668:
>
>
>Kind regards,
>
>Paul
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 2/3] Bluetooth: btmtksdio: Enable SCO over I2S function
2021-12-20 17:52 ` [PATCH 2/3] Bluetooth: btmtksdio: Enable SCO over I2S function sean.wang
@ 2021-12-20 18:47 ` Paul Menzel
0 siblings, 0 replies; 4+ messages in thread
From: Paul Menzel @ 2021-12-20 18:47 UTC (permalink / raw)
To: Sean Wang
Cc: marcel, johan.hedberg, Mark-YW.Chen, Soul.Huang, YN.Chen,
Leon.Yen, Eric-SY.Chang, Deren.Wu, km.lin, robin.chiu,
Eddie.Chen, ch.yeh, posh.sun, ted.huang, Eric.Liang,
Stella.Chang, Tom.Chou, steve.lee, jsiuda, frankgor, jemele,
abhishekpandit, michaelfsun, mcchou, shawnku, linux-bluetooth,
linux-mediatek, linux-kernel
Dear Sean,
Am 20.12.21 um 18:52 schrieb sean.wang@mediatek.com:
> From: Sean Wang <sean.wang@mediatek.com>
>> Am 18.12.21 um 02:08 schrieb sean.wang@mediatek.com:
>>> From: Mark Chen <mark-yw.chen@mediatek.com>
>>>
>>> For MediaTek chipset, the driver has to issue the specific
>>> command to enable Bluetooth SCO support over the I2S/PCM
>>> interface.
>>
>> Please document the datasheet name, revision and section, where
>> this is described.
>
> the datasheet is not released in public so Mark and I cannot provide
> the detail here, but we will make the patch easy to review and
> understand.
Too bad. The name and revision of the datasheet would still be good to
have documented.
>> Please add how SCO support can be tested. Are all Mediatek chipsets
>> supported?
>
> the SCO profile was tested by setting up a VOIP application,
> connected to HFP device, checked telephony function can work
> normally.
>
> currently, SCO is only supported by mt7921, we will change the
> subject to "Bluetooth: mt7921s: Enable SCO over I2S function" to
> avoid any misunderstanding.
Thank you.
I also saw a linux-firmare patch updating the firmware. If a specific
firmware version is required, please mention it too.
[…]
Kind regards,
Paul
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 2/3] Bluetooth: btmtksdio: Enable SCO over I2S function
2021-12-18 1:08 ` [PATCH 2/3] Bluetooth: btmtksdio: Enable SCO over I2S function sean.wang
@ 2021-12-18 10:30 ` Paul Menzel
0 siblings, 0 replies; 4+ messages in thread
From: Paul Menzel @ 2021-12-18 10:30 UTC (permalink / raw)
To: Sean Wang, Mark Chen
Cc: Marcel Holtmann, Johan Hedberg, Soul.Huang, YN.Chen, Leon.Yen,
Eric-SY.Chang, Deren.Wu, km.lin, robin.chiu, Eddie.Chen, ch.yeh,
posh.sun, ted.huang, Eric.Liang, Stella.Chang, Tom.Chou,
steve.lee, jsiuda, frankgor, jemele, abhishekpandit, michaelfsun,
mcchou, shawnku, linux-bluetooth, linux-mediatek, linux-kernel
Dear Sean, dear Mark,
Am 18.12.21 um 02:08 schrieb sean.wang@mediatek.com:
> From: Mark Chen <mark-yw.chen@mediatek.com>
>
> For MediaTek chipset, the driver has to issue the specific command to
> enable Bluetooth SCO support over the I2S/PCM interface.
Please document the datasheet name, revision and section, where this is
described.
Please add how SCO support can be tested. Are all Mediatek chipsets
supported?
> Co-developed-by: Sean Wang <sean.wang@mediatek.com>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com>
> ---
> drivers/bluetooth/btmtk.h | 20 +++++++++
> drivers/bluetooth/btmtksdio.c | 76 +++++++++++++++++++++++++++++++++++
> 2 files changed, 96 insertions(+)
>
> diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
> index 2be1d2680ad8..fc57ef09d132 100644
> --- a/drivers/bluetooth/btmtk.h
> +++ b/drivers/bluetooth/btmtk.h
> @@ -7,8 +7,12 @@
>
> #define HCI_WMT_MAX_EVENT_SIZE 64
>
> +#define BTMTK_WMT_REG_WRITE 0x1
> #define BTMTK_WMT_REG_READ 0x2
>
> +#define MT7921_PINMUX_0 0x70005050
> +#define MT7921_PINMUX_1 0x70005054
> +
> enum {
> BTMTK_WMT_PATCH_DWNLD = 0x1,
> BTMTK_WMT_TEST = 0x2,
> @@ -76,6 +80,22 @@ struct btmtk_wakeon {
> __le16 wakeup_delay;
> } __packed;
>
> +struct btmtk_sco {
> + u8 clock_config;
> + u8 transmit_format_config;
> + u8 channel_format_config;
> + u8 channel_select_config;
> +} __packed;
> +
> +struct reg_write_cmd {
> + u8 type;
> + u8 rsv;
> + u8 num;
> + __le32 addr;
> + __le32 data;
> + __le32 mask;
> +} __packed;
> +
> struct btmtk_hci_wmt_params {
> u8 op;
> u8 flag;
> diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
> index 771733ce362b..8e4d8c2da824 100644
> --- a/drivers/bluetooth/btmtksdio.c
> +++ b/drivers/bluetooth/btmtksdio.c
> @@ -830,6 +830,74 @@ static int btsdio_mtk_reg_read(struct hci_dev *hdev, u32 reg, u32 *val)
> return err;
> }
>
> +static int btsdio_mtk_reg_write(struct hci_dev *hdev, u32 reg, u32 val, u32 mask)
> +{
> + struct btmtk_hci_wmt_params wmt_params;
> + struct reg_write_cmd reg_write = {
> + .type = 1,
> + .num = 1,
> + .addr = cpu_to_le32(reg),
> + .data = cpu_to_le32(val),
> + .mask = cpu_to_le32(mask),
> + };
> + int err, status;
> +
> + wmt_params.op = BTMTK_WMT_REGISTER;
> + wmt_params.flag = BTMTK_WMT_REG_WRITE;
> + wmt_params.dlen = sizeof(reg_write);
> + wmt_params.data = ®_write;
> + wmt_params.status = &status;
> +
> + err = mtk_hci_wmt_sync(hdev, &wmt_params);
> + if (err < 0)
> + bt_dev_err(hdev, "Failed to write reg(%d)", err);
> +
> + return err;
> +}
> +
> +static int btsdio_mtk_sco_setting(struct hci_dev *hdev)
> +{
> + struct btmtk_sco sco_setting = {
> + .clock_config = 0x49,
> + .channel_format_config = 0x80,
> + };
> + struct sk_buff *skb;
> + u32 val;
> + int err;
> +
> + /* Enable SCO over i2s/pcm for Mediatek Chipset */
s/Chipset/chipset/
> + skb = __hci_cmd_sync(hdev, 0xfc72, sizeof(sco_setting),
> + &sco_setting, HCI_CMD_TIMEOUT);
> + if (IS_ERR(skb))
> + return PTR_ERR(skb);
> +
> + err = btsdio_mtk_reg_read(hdev, MT7921_PINMUX_0, &val);
> + if (err < 0) {
> + bt_dev_err(hdev, "Failed to read register (%d)", err);
> + return err;
> + }
> +
> + val |= 0x11000000;
> + err = btsdio_mtk_reg_write(hdev, MT7921_PINMUX_0, val, ~0);
> + if (err < 0) {
> + bt_dev_err(hdev, "Failed to write register (%d)", err);
> + return err;
> + }
> +
> + err = btsdio_mtk_reg_read(hdev, MT7921_PINMUX_1, &val);
> + if (err < 0) {
> + bt_dev_err(hdev, "Failed to read register (%d)", err);
> + return err;
> + }
> +
> + val |= 0x00000101;
> + err = btsdio_mtk_reg_write(hdev, MT7921_PINMUX_1, val, ~0);
> + if (err < 0)
> + bt_dev_err(hdev, "Failed to write register (%d)", err);
> +
> + return err;
> +}
> +
> static int btmtksdio_setup(struct hci_dev *hdev)
> {
> struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
> @@ -862,6 +930,14 @@ static int btmtksdio_setup(struct hci_dev *hdev)
> err = mt79xx_setup(hdev, fwname);
> if (err < 0)
> return err;
> +
> + /* Enable sco over i2s/pcm */
s/sco/SCO/
> + err = btsdio_mtk_sco_setting(hdev);
> + if (err < 0) {
> + bt_dev_err(hdev, "Failed to enable sco setting (%d)", err);
s/sco/SCO/
> + return err;
> + }
> +
> break;
> case 0x7663:
> case 0x7668:
Kind regards,
Paul
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 2/3] Bluetooth: btmtksdio: Enable SCO over I2S function
2021-12-18 1:08 [PATCH RESEND 1/3] Bluetooth: btmtksdio: add the support of wake on bluetooth sean.wang
@ 2021-12-18 1:08 ` sean.wang
2021-12-18 10:30 ` Paul Menzel
0 siblings, 1 reply; 4+ messages in thread
From: sean.wang @ 2021-12-18 1:08 UTC (permalink / raw)
To: marcel, johan.hedberg
Cc: Mark-YW.Chen, sean.wang, Soul.Huang, YN.Chen, Leon.Yen,
Eric-SY.Chang, Deren.Wu, km.lin, robin.chiu, Eddie.Chen, ch.yeh,
posh.sun, ted.huang, Eric.Liang, Stella.Chang, Tom.Chou,
steve.lee, jsiuda, frankgor, jemele, abhishekpandit, michaelfsun,
mcchou, shawnku, linux-bluetooth, linux-mediatek, linux-kernel,
Mark Chen
From: Mark Chen <mark-yw.chen@mediatek.com>
For MediaTek chipset, the driver has to issue the specific command to
enable Bluetooth SCO support over the I2S/PCM interface.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com>
---
drivers/bluetooth/btmtk.h | 20 +++++++++
drivers/bluetooth/btmtksdio.c | 76 +++++++++++++++++++++++++++++++++++
2 files changed, 96 insertions(+)
diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
index 2be1d2680ad8..fc57ef09d132 100644
--- a/drivers/bluetooth/btmtk.h
+++ b/drivers/bluetooth/btmtk.h
@@ -7,8 +7,12 @@
#define HCI_WMT_MAX_EVENT_SIZE 64
+#define BTMTK_WMT_REG_WRITE 0x1
#define BTMTK_WMT_REG_READ 0x2
+#define MT7921_PINMUX_0 0x70005050
+#define MT7921_PINMUX_1 0x70005054
+
enum {
BTMTK_WMT_PATCH_DWNLD = 0x1,
BTMTK_WMT_TEST = 0x2,
@@ -76,6 +80,22 @@ struct btmtk_wakeon {
__le16 wakeup_delay;
} __packed;
+struct btmtk_sco {
+ u8 clock_config;
+ u8 transmit_format_config;
+ u8 channel_format_config;
+ u8 channel_select_config;
+} __packed;
+
+struct reg_write_cmd {
+ u8 type;
+ u8 rsv;
+ u8 num;
+ __le32 addr;
+ __le32 data;
+ __le32 mask;
+} __packed;
+
struct btmtk_hci_wmt_params {
u8 op;
u8 flag;
diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index 771733ce362b..8e4d8c2da824 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -830,6 +830,74 @@ static int btsdio_mtk_reg_read(struct hci_dev *hdev, u32 reg, u32 *val)
return err;
}
+static int btsdio_mtk_reg_write(struct hci_dev *hdev, u32 reg, u32 val, u32 mask)
+{
+ struct btmtk_hci_wmt_params wmt_params;
+ struct reg_write_cmd reg_write = {
+ .type = 1,
+ .num = 1,
+ .addr = cpu_to_le32(reg),
+ .data = cpu_to_le32(val),
+ .mask = cpu_to_le32(mask),
+ };
+ int err, status;
+
+ wmt_params.op = BTMTK_WMT_REGISTER;
+ wmt_params.flag = BTMTK_WMT_REG_WRITE;
+ wmt_params.dlen = sizeof(reg_write);
+ wmt_params.data = ®_write;
+ wmt_params.status = &status;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0)
+ bt_dev_err(hdev, "Failed to write reg(%d)", err);
+
+ return err;
+}
+
+static int btsdio_mtk_sco_setting(struct hci_dev *hdev)
+{
+ struct btmtk_sco sco_setting = {
+ .clock_config = 0x49,
+ .channel_format_config = 0x80,
+ };
+ struct sk_buff *skb;
+ u32 val;
+ int err;
+
+ /* Enable SCO over i2s/pcm for Mediatek Chipset */
+ skb = __hci_cmd_sync(hdev, 0xfc72, sizeof(sco_setting),
+ &sco_setting, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ err = btsdio_mtk_reg_read(hdev, MT7921_PINMUX_0, &val);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to read register (%d)", err);
+ return err;
+ }
+
+ val |= 0x11000000;
+ err = btsdio_mtk_reg_write(hdev, MT7921_PINMUX_0, val, ~0);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to write register (%d)", err);
+ return err;
+ }
+
+ err = btsdio_mtk_reg_read(hdev, MT7921_PINMUX_1, &val);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to read register (%d)", err);
+ return err;
+ }
+
+ val |= 0x00000101;
+ err = btsdio_mtk_reg_write(hdev, MT7921_PINMUX_1, val, ~0);
+ if (err < 0)
+ bt_dev_err(hdev, "Failed to write register (%d)", err);
+
+ return err;
+}
+
static int btmtksdio_setup(struct hci_dev *hdev)
{
struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
@@ -862,6 +930,14 @@ static int btmtksdio_setup(struct hci_dev *hdev)
err = mt79xx_setup(hdev, fwname);
if (err < 0)
return err;
+
+ /* Enable sco over i2s/pcm */
+ err = btsdio_mtk_sco_setting(hdev);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to enable sco setting (%d)", err);
+ return err;
+ }
+
break;
case 0x7663:
case 0x7668:
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-12-20 18:47 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <638a2506-c410-d98c-b704-6f16f72e0bc6@molgen.mpg.de--annotate>
2021-12-20 17:52 ` [PATCH 2/3] Bluetooth: btmtksdio: Enable SCO over I2S function sean.wang
2021-12-20 18:47 ` Paul Menzel
2021-12-18 1:08 [PATCH RESEND 1/3] Bluetooth: btmtksdio: add the support of wake on bluetooth sean.wang
2021-12-18 1:08 ` [PATCH 2/3] Bluetooth: btmtksdio: Enable SCO over I2S function sean.wang
2021-12-18 10:30 ` Paul Menzel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).