linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Huacai Chen <chenhc@lemote.com>
To: Ralf Baechle <ralf@linux-mips.org>, James Hogan <jhogan@kernel.org>
Cc: Paul Burton <paul.burton@mips.com>,
	linux-mips@linux-mips.org, linux-mips@vger.kernel.org,
	Fuxin Zhang <zhangfx@lemote.com>,
	Zhangjin Wu <wuzhangjin@gmail.com>,
	Huacai Chen <chenhuacai@gmail.com>,
	Huacai Chen <chenhc@lemote.com>
Subject: [PATCH 2/3] MIPS: Loongson: Rename LOONGSON1 to LOONGSON32
Date: Sun,  3 Nov 2019 13:20:16 +0800	[thread overview]
Message-ID: <1572758417-29265-2-git-send-email-chenhc@lemote.com> (raw)
In-Reply-To: <1572758417-29265-1-git-send-email-chenhc@lemote.com>

Old Loongson-2E/2F has been removed, new Loongson-2/3 use LOONGSON64,
So rename LOONGSON1 to LOONGSON32 will make the naming style unified.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
---
 arch/mips/Kconfig                    | 6 +++---
 arch/mips/include/asm/cpu-type.h     | 2 +-
 arch/mips/include/asm/cpu.h          | 2 +-
 arch/mips/include/asm/irqflags.h     | 2 +-
 arch/mips/include/asm/module.h       | 4 ++--
 arch/mips/kernel/cpu-probe.c         | 2 +-
 arch/mips/kernel/idle.c              | 2 +-
 arch/mips/kernel/perf_event_mipsxx.c | 2 +-
 arch/mips/kernel/traps.c             | 2 +-
 arch/mips/loongson32/Kconfig         | 2 +-
 arch/mips/loongson32/Platform        | 4 ++--
 arch/mips/oprofile/common.c          | 2 +-
 arch/mips/oprofile/op_model_mipsxx.c | 2 +-
 13 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 03e9304..b578eae 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1480,7 +1480,7 @@ config CPU_LOONGSON3_WORKAROUNDS
 config CPU_LOONGSON1B
 	bool "Loongson 1B"
 	depends on SYS_HAS_CPU_LOONGSON1B
-	select CPU_LOONGSON1
+	select CPU_LOONGSON32
 	select LEDS_GPIO_REGISTER
 	help
 	  The Loongson 1B is a 32-bit SoC, which implements the MIPS32
@@ -1490,7 +1490,7 @@ config CPU_LOONGSON1B
 config CPU_LOONGSON1C
 	bool "Loongson 1C"
 	depends on SYS_HAS_CPU_LOONGSON1C
-	select CPU_LOONGSON1
+	select CPU_LOONGSON32
 	select LEDS_GPIO_REGISTER
 	help
 	  The Loongson 1C is a 32-bit SoC, which implements the MIPS32
@@ -1853,7 +1853,7 @@ config SYS_SUPPORTS_ZBOOT_UART_PROM
 	bool
 	select SYS_SUPPORTS_ZBOOT
 
-config CPU_LOONGSON1
+config CPU_LOONGSON32
 	bool
 	select CPU_MIPS32
 	select CPU_MIPSR2
diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h
index f40da24..d324c3d 100644
--- a/arch/mips/include/asm/cpu-type.h
+++ b/arch/mips/include/asm/cpu-type.h
@@ -21,7 +21,7 @@ static inline int __pure __get_cpu_type(const int cpu_type)
 
 #if defined(CONFIG_SYS_HAS_CPU_LOONGSON1B) || \
     defined(CONFIG_SYS_HAS_CPU_LOONGSON1C)
-	case CPU_LOONGSON1:
+	case CPU_LOONGSON32:
 #endif
 
 #ifdef CONFIG_SYS_HAS_CPU_MIPS32_R1
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index b39ae3f..2d74f03 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -312,7 +312,7 @@ enum cpu_type_enum {
 	 */
 	CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
 	CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
-	CPU_BMIPS4380, CPU_BMIPS5000, CPU_XBURST, CPU_LOONGSON1, CPU_M14KC,
+	CPU_BMIPS4380, CPU_BMIPS5000, CPU_XBURST, CPU_LOONGSON32, CPU_M14KC,
 	CPU_M14KEC, CPU_INTERAPTIV, CPU_P5600, CPU_PROAPTIV, CPU_1074K,
 	CPU_M5150, CPU_I6400, CPU_P6600, CPU_M6250,
 
diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h
index 4d742ac..881754d 100644
--- a/arch/mips/include/asm/irqflags.h
+++ b/arch/mips/include/asm/irqflags.h
@@ -41,7 +41,7 @@ static inline unsigned long arch_local_irq_save(void)
 	"	.set	push						\n"
 	"	.set	reorder						\n"
 	"	.set	noat						\n"
-#if defined(CONFIG_CPU_LOONGSON64) || defined (CONFIG_CPU_LOONGSON1)
+#if defined(CONFIG_CPU_LOONGSON64) || defined (CONFIG_CPU_LOONGSON32)
 	"	mfc0	%[flags], $12					\n"
 	"	di							\n"
 #else
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index 03cc882..161e7b5 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -119,8 +119,8 @@ search_module_dbetables(unsigned long addr)
 #define MODULE_PROC_FAMILY "RM7000 "
 #elif defined CONFIG_CPU_SB1
 #define MODULE_PROC_FAMILY "SB1 "
-#elif defined CONFIG_CPU_LOONGSON1
-#define MODULE_PROC_FAMILY "LOONGSON1 "
+#elif defined CONFIG_CPU_LOONGSON32
+#define MODULE_PROC_FAMILY "LOONGSON32 "
 #elif defined CONFIG_CPU_LOONGSON64
 #define MODULE_PROC_FAMILY "LOONGSON64 "
 #elif defined CONFIG_CPU_CAVIUM_OCTEON
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 0933cfb..229d0ae 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1557,7 +1557,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 	case PRID_IMP_LOONGSON_32:  /* Loongson-1 */
 		decode_configs(c);
 
-		c->cputype = CPU_LOONGSON1;
+		c->cputype = CPU_LOONGSON32;
 
 		switch (c->processor_id & PRID_REV_MASK) {
 		case PRID_REV_LOONGSON1B:
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
index 57dfa6c..37f8e78 100644
--- a/arch/mips/kernel/idle.c
+++ b/arch/mips/kernel/idle.c
@@ -173,7 +173,7 @@ void __init check_wait(void)
 	case CPU_CAVIUM_OCTEON2:
 	case CPU_CAVIUM_OCTEON3:
 	case CPU_XBURST:
-	case CPU_LOONGSON1:
+	case CPU_LOONGSON32:
 	case CPU_XLR:
 	case CPU_XLP:
 		cpu_wait = r4k_wait;
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index 0af456a..128fc99 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -1764,7 +1764,7 @@ init_hw_perf_events(void)
 		mipspmu.general_event_map = &mipsxxcore_event_map;
 		mipspmu.cache_event_map = &mipsxxcore_cache_map;
 		break;
-	case CPU_LOONGSON1:
+	case CPU_LOONGSON32:
 		mipspmu.name = "mips/loongson1";
 		mipspmu.general_event_map = &mipsxxcore_event_map;
 		mipspmu.cache_event_map = &mipsxxcore_cache_map;
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 0c2570e..83f2a43 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1761,7 +1761,7 @@ static inline void parity_protection_init(void)
 
 	case CPU_5KC:
 	case CPU_5KE:
-	case CPU_LOONGSON1:
+	case CPU_LOONGSON32:
 		write_c0_ecc(0x80000000);
 		back_to_back_c0_hazard();
 		/* Set the PE bit (bit 31) in the c0_errctl register. */
diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
index 6dacc14..e27879b 100644
--- a/arch/mips/loongson32/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -38,7 +38,7 @@ endchoice
 menuconfig CEVT_CSRC_LS1X
 	bool "Use PWM Timer for clockevent/clocksource"
 	select MIPS_EXTERNAL_TIMER
-	depends on CPU_LOONGSON1
+	depends on CPU_LOONGSON32
 	help
 	  This option changes the default clockevent/clocksource to PWM Timer,
 	  and is required by Loongson1 CPUFreq support.
diff --git a/arch/mips/loongson32/Platform b/arch/mips/loongson32/Platform
index 3332155..7f8e342 100644
--- a/arch/mips/loongson32/Platform
+++ b/arch/mips/loongson32/Platform
@@ -1,4 +1,4 @@
-cflags-$(CONFIG_CPU_LOONGSON1)		+= -march=mips32r2 -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON32)		+= -march=mips32r2 -Wa,--trap
 platform-$(CONFIG_MACH_LOONGSON32)	+= loongson32/
 cflags-$(CONFIG_MACH_LOONGSON32)	+= -I$(srctree)/arch/mips/include/asm/mach-loongson32
-load-$(CONFIG_CPU_LOONGSON1)		+= 0xffffffff80200000
+load-$(CONFIG_CPU_LOONGSON32)		+= 0xffffffff80200000
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index cbfa849..606aa12 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -92,7 +92,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	case CPU_P5600:
 	case CPU_I6400:
 	case CPU_M5150:
-	case CPU_LOONGSON1:
+	case CPU_LOONGSON32:
 	case CPU_SB1:
 	case CPU_SB1A:
 	case CPU_R10000:
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 96c13a0..a537bf9 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -420,7 +420,7 @@ static int __init mipsxx_init(void)
 		op_model_mipsxx_ops.cpu_type = "mips/sb1";
 		break;
 
-	case CPU_LOONGSON1:
+	case CPU_LOONGSON32:
 		op_model_mipsxx_ops.cpu_type = "mips/loongson1";
 		break;
 
-- 
2.7.0


       reply	other threads:[~2019-11-03  5:18 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1572758417-29265-1-git-send-email-chenhc@lemote.com>
2019-11-03  5:20 ` Huacai Chen [this message]
2019-11-03 11:26   ` [PATCH 2/3] MIPS: Loongson: Rename LOONGSON1 to LOONGSON32 Huacai Chen
2019-11-03  5:20 ` [PATCH 3/3] MIPS: Loongson: Unify LOONGSON3/LOONGSON64 Kconfig usage Huacai Chen
2019-11-03  5:35   ` Jiaxun Yang
2019-11-03 23:08 ` [PATCH 1/3] MIPS: Loongson: Remove Loongson-2E/2F support Maciej W. Rozycki
2019-11-04  6:05   ` Huacai Chen
2019-11-05 13:54   ` Jiaxun Yang
2020-02-26  2:38     ` Maciej W. Rozycki
2019-11-04 19:03 ` Paul Burton
2019-11-05  1:14   ` Huacai Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1572758417-29265-2-git-send-email-chenhc@lemote.com \
    --to=chenhc@lemote.com \
    --cc=chenhuacai@gmail.com \
    --cc=jhogan@kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=paul.burton@mips.com \
    --cc=ralf@linux-mips.org \
    --cc=wuzhangjin@gmail.com \
    --cc=zhangfx@lemote.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).