From: "周琰杰 (Zhou Yanjie)" <zhouyanjie@wanyeetech.com> To: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, robh+dt@kernel.org, paul.burton@mips.com, paulburton@kernel.org, paul@crapouillou.net, mark.rutland@arm.com, sernia.zhou@foxmail.com, zhenwenjin@gmail.com, linus.walleij@linaro.org Subject: [PATCH v8 3/5] pinctrl: Ingenic: Introduce reg_offset and use it instead hard code. Date: Mon, 16 Dec 2019 00:21:02 +0800 [thread overview] Message-ID: <1576426864-35348-5-git-send-email-zhouyanjie@wanyeetech.com> (raw) In-Reply-To: <1576426864-35348-1-git-send-email-zhouyanjie@wanyeetech.com> Introduce "reg_offset", use it instead hard code "0x100", it will also be used for subsequent X1830 pinctrl driver. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> --- Notes: v8: New patch. drivers/pinctrl/pinctrl-ingenic.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c index ca947fa..1644160 100644 --- a/drivers/pinctrl/pinctrl-ingenic.c +++ b/drivers/pinctrl/pinctrl-ingenic.c @@ -64,6 +64,7 @@ enum jz_version { struct ingenic_chip_info { unsigned int num_chips; + unsigned int reg_offset; const struct group_desc *groups; unsigned int num_groups; @@ -216,6 +217,7 @@ static const struct function_desc jz4740_functions[] = { static const struct ingenic_chip_info jz4740_chip_info = { .num_chips = 4, + .reg_offset = 0x100, .groups = jz4740_groups, .num_groups = ARRAY_SIZE(jz4740_groups), .functions = jz4740_functions, @@ -339,6 +341,7 @@ static const struct function_desc jz4725b_functions[] = { static const struct ingenic_chip_info jz4725b_chip_info = { .num_chips = 4, + .reg_offset = 0x100, .groups = jz4725b_groups, .num_groups = ARRAY_SIZE(jz4725b_groups), .functions = jz4725b_functions, @@ -592,6 +595,7 @@ static const struct function_desc jz4760_functions[] = { static const struct ingenic_chip_info jz4760_chip_info = { .num_chips = 6, + .reg_offset = 0x100, .groups = jz4760_groups, .num_groups = ARRAY_SIZE(jz4760_groups), .functions = jz4760_functions, @@ -602,6 +606,7 @@ static const struct ingenic_chip_info jz4760_chip_info = { static const struct ingenic_chip_info jz4760b_chip_info = { .num_chips = 6, + .reg_offset = 0x100, .groups = jz4760_groups, .num_groups = ARRAY_SIZE(jz4760_groups), .functions = jz4760_functions, @@ -880,6 +885,7 @@ static const struct function_desc jz4770_functions[] = { static const struct ingenic_chip_info jz4770_chip_info = { .num_chips = 6, + .reg_offset = 0x100, .groups = jz4770_groups, .num_groups = ARRAY_SIZE(jz4770_groups), .functions = jz4770_functions, @@ -1013,6 +1019,7 @@ static const struct function_desc jz4780_functions[] = { static const struct ingenic_chip_info jz4780_chip_info = { .num_chips = 6, + .reg_offset = 0x100, .groups = jz4780_groups, .num_groups = ARRAY_SIZE(jz4780_groups), .functions = jz4780_functions, @@ -1269,6 +1276,7 @@ static const struct function_desc x1000_functions[] = { static const struct ingenic_chip_info x1000_chip_info = { .num_chips = 4, + .reg_offset = 0x100, .groups = x1000_groups, .num_groups = ARRAY_SIZE(x1000_groups), .functions = x1000_functions, @@ -1279,6 +1287,7 @@ static const struct ingenic_chip_info x1000_chip_info = { static const struct ingenic_chip_info x1000e_chip_info = { .num_chips = 4, + .reg_offset = 0x100, .groups = x1000_groups, .num_groups = ARRAY_SIZE(x1000_groups), .functions = x1000_functions, @@ -1391,6 +1400,7 @@ static const struct function_desc x1500_functions[] = { static const struct ingenic_chip_info x1500_chip_info = { .num_chips = 4, + .reg_offset = 0x100, .groups = x1500_groups, .num_groups = ARRAY_SIZE(x1500_groups), .functions = x1500_functions, @@ -1675,7 +1685,7 @@ static inline void ingenic_config_pin(struct ingenic_pinctrl *jzpc, unsigned int idx = pin % PINS_PER_GPIO_CHIP; unsigned int offt = pin / PINS_PER_GPIO_CHIP; - regmap_write(jzpc->map, offt * 0x100 + + regmap_write(jzpc->map, offt * jzpc->info->reg_offset + (set ? REG_SET(reg) : REG_CLEAR(reg)), BIT(idx)); } @@ -1684,7 +1694,7 @@ static inline void ingenic_shadow_config_pin(struct ingenic_pinctrl *jzpc, { unsigned int idx = pin % PINS_PER_GPIO_CHIP; - regmap_write(jzpc->map, X1000_GPIO_PZ_BASE + + regmap_write(jzpc->map, REG_PZ_BASE(jzpc->info->reg_offset) + (set ? REG_SET(reg) : REG_CLEAR(reg)), BIT(idx)); } @@ -1701,7 +1711,7 @@ static inline bool ingenic_get_pin_config(struct ingenic_pinctrl *jzpc, unsigned int offt = pin / PINS_PER_GPIO_CHIP; unsigned int val; - regmap_read(jzpc->map, offt * 0x100 + reg, &val); + regmap_read(jzpc->map, offt * jzpc->info->reg_offset + reg, &val); return val & BIT(idx); } @@ -2045,7 +2055,7 @@ static int __init ingenic_gpio_probe(struct ingenic_pinctrl *jzpc, return -ENOMEM; jzgc->jzpc = jzpc; - jzgc->reg_base = bank * 0x100; + jzgc->reg_base = bank * jzpc->info->reg_offset; jzgc->gc.label = devm_kasprintf(dev, GFP_KERNEL, "GPIO%c", 'A' + bank); if (!jzgc->gc.label) -- 2.7.4
next prev parent reply other threads:[~2019-12-15 16:21 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-12-15 16:20 Fix bugs in X1000/X1500 and add X1830 pinctrl driver v8 周琰杰 (Zhou Yanjie) 2019-12-15 16:20 ` [PATCH v8 0/5] " 周琰杰 (Zhou Yanjie) 2020-01-06 22:46 ` Linus Walleij 2019-12-15 16:21 ` [PATCH v8 1/5] pinctrl: Ingenic: Fix bugs in X1000 and X1500 周琰杰 (Zhou Yanjie) 2019-12-15 16:21 ` [PATCH v8 2/5] pinctrl: Ingenic: Add missing parts for " 周琰杰 (Zhou Yanjie) 2019-12-15 16:21 ` 周琰杰 (Zhou Yanjie) [this message] 2019-12-15 16:21 ` [PATCH v8 4/5] dt-bindings: pinctrl: Add bindings for Ingenic X1830 周琰杰 (Zhou Yanjie) 2019-12-15 16:21 ` [PATCH v8 5/5] pinctrl: Ingenic: Add pinctrl driver for X1830 周琰杰 (Zhou Yanjie)
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1576426864-35348-5-git-send-email-zhouyanjie@wanyeetech.com \ --to=zhouyanjie@wanyeetech.com \ --cc=devicetree@vger.kernel.org \ --cc=linus.walleij@linaro.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mips@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=paul.burton@mips.com \ --cc=paul@crapouillou.net \ --cc=paulburton@kernel.org \ --cc=robh+dt@kernel.org \ --cc=sernia.zhou@foxmail.com \ --cc=zhenwenjin@gmail.com \ --subject='Re: [PATCH v8 3/5] pinctrl: Ingenic: Introduce reg_offset and use it instead hard code.' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).