Linux-MIPS Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 00/12] MIPS: Fixes and improvements for CI20 board (JZ4780)
@ 2020-02-14 16:10 H. Nikolaus Schaller
  2020-02-14 16:10 ` [PATCH v2 01/12] drm: ingenic-drm: add MODULE_DEVICE_TABLE H. Nikolaus Schaller
                   ` (11 more replies)
  0 siblings, 12 replies; 19+ messages in thread
From: H. Nikolaus Schaller @ 2020-02-14 16:10 UTC (permalink / raw)
  To: Paul Boddie, Paul Cercueil, Rob Herring, Mark Rutland,
	Ralf Baechle, Paul Burton, David Airlie, Daniel Vetter,
	H. Nikolaus Schaller, Andi Kleen, Miquel Raynal, Kees Cook
  Cc: devicetree, linux-mips, linux-kernel, dri-devel, letux-kernel, kernel

V2:
* dropped "net: davicom: dm9000: allow to pass MAC address through mac_addr module parameter"
  from this series because it goes through the netdev tree
  (suggested by Andrew Lunn <andrew@lunn.ch>)
* added a "fixes:" for "MIPS: DTS: CI20: fix PMU definitions for ACT8600"
  and "MIPS: DTS: CI20: fix interrupt for pcf8563 RTC"
  (suggested by Andreas Kemnade <andreas@kemnade.info>)
* "i2c: jz4780: silence log flood on txabrt" dropped because it is
  replaced by a new version in v5.6 by Wolfram Sang <wsa@the-dreams.de>

PATCH V1 2020-02-11 22:41:43:
This patch set provides several improvements for the CI20 board:

* suppress warnings from i2c if device is not responding
* make ingenic-drm found through DT
* allow davicom dm9000 ethernet controller to use MAC address provided by U-Boot
* fix #include in jz4780.dtsi
* configure for loadable kernel modules
* add DTS for IR sensor and SW1 button
* configure so that LEDs, IR sensor, SW1 button have drivers
* fix DTS for ACT8600 PMU and configure driver
* fix interrupt of nxp,pcf8563

There is another patch set in our queue to add HDMI support on top of this work.

Signed-off-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>


Alex Smith (1):
  MIPS: DTS: CI20: add DT node for IR sensor

H. Nikolaus Schaller (11):
  drm: ingenic-drm: add MODULE_DEVICE_TABLE
  MIPS: DTS: jz4780: add #includes for irq.h and gpio.h
  MIPS: CI20: defconfig: configure for supporting modules
  MIPS: CI20: defconfig: compile leds-gpio driver into the kernel and
    configure for LED triggers
  MIPS: DTS: CI20: fix PMU definitions for ACT8600
  MIPS: CI20: defconfig: configure CONFIG_REGULATOR_ACT8865 for PMU
  MIPS: DTS: CI20: give eth0_power a defined voltage.
  MIPS: CI20: defconfig: compile gpio-ir driver
  MIPS: DTS: CI20: add DT node for SW1 as Enter button
  MIPS: CI20: defconfig: configure for CONFIG_KEYBOARD_GPIO=m
  MIPS: DTS: CI20: fix interrupt for pcf8563 RTC

 arch/mips/boot/dts/ingenic/ci20.dts    | 71 ++++++++++++++++++++------
 arch/mips/boot/dts/ingenic/jz4780.dtsi |  2 +
 arch/mips/configs/ci20_defconfig       | 21 ++++++++
 drivers/gpu/drm/ingenic/ingenic-drm.c  |  2 +
 4 files changed, 80 insertions(+), 16 deletions(-)

-- 
2.23.0


^ permalink raw reply	[flat|nested] 19+ messages in thread

end of thread, back to index

Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-14 16:10 [PATCH v2 00/12] MIPS: Fixes and improvements for CI20 board (JZ4780) H. Nikolaus Schaller
2020-02-14 16:10 ` [PATCH v2 01/12] drm: ingenic-drm: add MODULE_DEVICE_TABLE H. Nikolaus Schaller
2020-02-14 19:06   ` Paul Cercueil
2020-02-14 19:24     ` H. Nikolaus Schaller
2020-02-14 16:10 ` [PATCH v2 02/12] MIPS: DTS: jz4780: add #includes for irq.h and gpio.h H. Nikolaus Schaller
2020-02-14 16:10 ` [PATCH v2 03/12] MIPS: CI20: defconfig: configure for supporting modules H. Nikolaus Schaller
2020-02-14 19:10   ` Paul Cercueil
2020-02-14 19:30     ` H. Nikolaus Schaller
2020-02-14 19:42       ` Paul Cercueil
2020-02-14 16:10 ` [PATCH v2 04/12] MIPS: CI20: defconfig: compile leds-gpio driver into the kernel and configure for LED triggers H. Nikolaus Schaller
2020-02-14 16:10 ` [PATCH v2 05/12] MIPS: DTS: CI20: fix PMU definitions for ACT8600 H. Nikolaus Schaller
2020-02-14 16:10 ` [PATCH v2 06/12] MIPS: CI20: defconfig: configure CONFIG_REGULATOR_ACT8865 for PMU H. Nikolaus Schaller
2020-02-14 16:10 ` [PATCH v2 07/12] MIPS: DTS: CI20: give eth0_power a defined voltage H. Nikolaus Schaller
2020-02-14 16:10 ` [PATCH v2 08/12] MIPS: DTS: CI20: add DT node for IR sensor H. Nikolaus Schaller
2020-02-14 16:10 ` [PATCH v2 09/12] MIPS: CI20: defconfig: compile gpio-ir driver H. Nikolaus Schaller
2020-02-14 16:10 ` [PATCH v2 10/12] MIPS: DTS: CI20: add DT node for SW1 as Enter button H. Nikolaus Schaller
2020-02-14 16:10 ` [PATCH v2 11/12] MIPS: CI20: defconfig: configure for CONFIG_KEYBOARD_GPIO=m H. Nikolaus Schaller
2020-02-14 16:10 ` [PATCH v2 12/12] MIPS: DTS: CI20: fix interrupt for pcf8563 RTC H. Nikolaus Schaller
2020-02-14 19:13   ` Paul Cercueil

Linux-MIPS Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mips/0 linux-mips/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mips linux-mips/ https://lore.kernel.org/linux-mips \
		linux-mips@vger.kernel.org
	public-inbox-index linux-mips

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mips


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git