[PATCH V2 0/5] MIPS: Loongson64: Fix and improve irqchip drivers

[PATCH V2 0/5] MIPS: Loongson64: Fix and improve irqchip drivers

[Huacai Chen]

Modernized Loongson64 platforms use a hierarchical interrupt controller
architecture. For LS7A PCH, the hierarchy (from inside to outside) is
CPUINTC --> LIOINTC --> HTVEC --> PCHPIC/PCHMSI. However, the current
status is that there are several bugs in the LIOINTC and PCHPIC drivers,
and the HTVEC driver should be improved to support 8 groups of vectors.
Loonson64C support only 4 groups of HT vectors, and Loongson64G support
as many as 8 groups, so the .dts file and dt-bindings description should
also be updated.

V1 -> V2:
1, Add a cover letter.
2, Add Reviewed-by and Tested-by tags.
3, Improve commit messages by adding Fixes: tags.

Huacai Chen(5):
 dt-bindings: interrupt-controller: Update Loongson HTVEC description
 MIPS: DTS: Fix number of msi vectors for Loongson64G
 irqchip: loongson-liointc: Fix misuse of gc->mask_cache
 irqchip: loongson-htvec: Support 8 groups of HT vectors
 irqchip: loongson-pch-pic: Fix the misused irq flow handler

Signed-off-by: Huacai Chen <chenhc@lemote.com>
---
 .../interrupt-controller/loongson,htvec.yaml       |  4 ++--
 .../boot/dts/loongson/loongson64g_4core_ls7a.dts   |  8 ++++++--
 drivers/irqchip/irq-loongson-htvec.c               | 22 ++++++++++------------
 drivers/irqchip/irq-loongson-liointc.c             | 10 +++++-----
 drivers/irqchip/irq-loongson-pch-pic.c             | 15 ++++-----------
 5 files changed, 27 insertions(+), 32 deletions(-)
--
2.7.0

[PATCH V2 1/5] dt-bindings: interrupt-controller: Update Loongson HTVEC description

[Huacai Chen]

Loongson HTVEC support 8 parents interrupts in maximum, so update the
maxItems description.

Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
---
 .../devicetree/bindings/interrupt-controller/loongson,htvec.yaml      | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml
index e865cd8..87a7455 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml
@@ -22,8 +22,8 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 4
-    description: Four parent interrupts that receive chained interrupts.
+    maxItems: 8
+    description: Eight parent interrupts that receive chained interrupts.
 
   interrupt-controller: true
 
-- 
2.7.0

[PATCH V2 2/5] MIPS: DTS: Fix number of msi vectors for Loongson64G

[Huacai Chen]

HT irqs vectors are 8 groups, each group has 32 irqs, Loongson64C CPUs
can use only 4 groups and Loongson64G CPUs can use all 8 groups. So the
number of msi vectors of Loongson64G is 192 (32*8 - 64 = 192).

Fixes: 24af105962c8004edb9f5bf84 ("MIPS: Loongson64: DeviceTree for LS7A PCH")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
---
 arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts b/arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts
index bdc911e..c945f85 100644
--- a/arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts
+++ b/arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts
@@ -20,7 +20,11 @@
 		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
 			     <25 IRQ_TYPE_LEVEL_HIGH>,
 			     <26 IRQ_TYPE_LEVEL_HIGH>,
-			     <27 IRQ_TYPE_LEVEL_HIGH>;
+			     <27 IRQ_TYPE_LEVEL_HIGH>,
+			     <28 IRQ_TYPE_LEVEL_HIGH>,
+			     <29 IRQ_TYPE_LEVEL_HIGH>,
+			     <30 IRQ_TYPE_LEVEL_HIGH>,
+			     <31 IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
 
@@ -31,7 +35,7 @@
 		interrupt-controller;
 		msi-controller;
 		loongson,msi-base-vec = <64>;
-		loongson,msi-num-vecs = <128>;
+		loongson,msi-num-vecs = <192>;
 		interrupt-parent = <&htvec>;
 	};
 };
-- 
2.7.0

Re: [PATCH V2 2/5] MIPS: DTS: Fix number of msi vectors for Loongson64G

[Thomas Bogendoerfer]

On Thu, Jul 30, 2020 at 04:51:27PM +0800, Huacai Chen wrote:
> HT irqs vectors are 8 groups, each group has 32 irqs, Loongson64C CPUs
> can use only 4 groups and Loongson64G CPUs can use all 8 groups. So the
> number of msi vectors of Loongson64G is 192 (32*8 - 64 = 192).
> 
> Fixes: 24af105962c8004edb9f5bf84 ("MIPS: Loongson64: DeviceTree for LS7A PCH")
> Signed-off-by: Huacai Chen <chenhc@lemote.com>
> ---
>  arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)

applied to mips-next.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]

[PATCH V2 3/5] irqchip: loongson-liointc: Fix misuse of gc->mask_cache

[Huacai Chen]

In gc->mask_cache bits, 1 means enabled and 0 means disabled, but in the
loongson-liointc driver mask_cache is misused by reverting its meaning.
This patch fix the bug and update the comments as well.

Fixes: dbb152267908c4b2c3639492a ("irqchip: Add driver for Loongson I/O Local Interrupt Controller")
Cc: stable@vger.kernel.org
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
---
 drivers/irqchip/irq-loongson-liointc.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
index 63b6147..08165c5 100644
--- a/drivers/irqchip/irq-loongson-liointc.c
+++ b/drivers/irqchip/irq-loongson-liointc.c
@@ -60,7 +60,7 @@ static void liointc_chained_handle_irq(struct irq_desc *desc)
 	if (!pending) {
 		/* Always blame LPC IRQ if we have that bug */
 		if (handler->priv->has_lpc_irq_errata &&
-			(handler->parent_int_map & ~gc->mask_cache &
+			(handler->parent_int_map & gc->mask_cache &
 			BIT(LIOINTC_ERRATA_IRQ)))
 			pending = BIT(LIOINTC_ERRATA_IRQ);
 		else
@@ -131,11 +131,11 @@ static void liointc_resume(struct irq_chip_generic *gc)
 	irq_gc_lock_irqsave(gc, flags);
 	/* Disable all at first */
 	writel(0xffffffff, gc->reg_base + LIOINTC_REG_INTC_DISABLE);
-	/* Revert map cache */
+	/* Restore map cache */
 	for (i = 0; i < LIOINTC_CHIP_IRQ; i++)
 		writeb(priv->map_cache[i], gc->reg_base + i);
-	/* Revert mask cache */
-	writel(~gc->mask_cache, gc->reg_base + LIOINTC_REG_INTC_ENABLE);
+	/* Restore mask cache */
+	writel(gc->mask_cache, gc->reg_base + LIOINTC_REG_INTC_ENABLE);
 	irq_gc_unlock_irqrestore(gc, flags);
 }
 
@@ -243,7 +243,7 @@ int __init liointc_of_init(struct device_node *node,
 	ct->chip.irq_mask_ack = irq_gc_mask_disable_reg;
 	ct->chip.irq_set_type = liointc_set_type;
 
-	gc->mask_cache = 0xffffffff;
+	gc->mask_cache = 0;
 	priv->gc = gc;
 
 	for (i = 0; i < LIOINTC_NUM_PARENT; i++) {
-- 
2.7.0

[PATCH V2 4/5] irqchip: loongson-htvec: Support 8 groups of HT vectors

[Huacai Chen]

The original version can only used by old Loongson-3 which only use 4
groups of HT vectors. Now Loongson-3A R4 can use 8 groups, so improve
the driver to support all 8 groups.

Fixes: 818e915fbac518e8c78e1877a ("irqchip: Add Loongson HyperTransport Vector support")
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
---
 drivers/irqchip/irq-loongson-htvec.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-htvec.c b/drivers/irqchip/irq-loongson-htvec.c
index 1ece933..e7722fa 100644
--- a/drivers/irqchip/irq-loongson-htvec.c
+++ b/drivers/irqchip/irq-loongson-htvec.c
@@ -19,15 +19,14 @@
 
 /* Registers */
 #define HTVEC_EN_OFF		0x20
-#define HTVEC_MAX_PARENT_IRQ	4
+#define HTVEC_MAX_PARENT_IRQ	8
 
 #define VEC_COUNT_PER_REG	32
-#define VEC_REG_COUNT		4
-#define VEC_COUNT		(VEC_COUNT_PER_REG * VEC_REG_COUNT)
 #define VEC_REG_IDX(irq_id)	((irq_id) / VEC_COUNT_PER_REG)
 #define VEC_REG_BIT(irq_id)	((irq_id) % VEC_COUNT_PER_REG)
 
 struct htvec {
+	int			num_parents;
 	void __iomem		*base;
 	struct irq_domain	*htvec_domain;
 	raw_spinlock_t		htvec_lock;
@@ -43,7 +42,7 @@ static void htvec_irq_dispatch(struct irq_desc *desc)
 
 	chained_irq_enter(chip, desc);
 
-	for (i = 0; i < VEC_REG_COUNT; i++) {
+	for (i = 0; i < priv->num_parents; i++) {
 		pending = readl(priv->base + 4 * i);
 		while (pending) {
 			int bit = __ffs(pending);
@@ -147,7 +146,7 @@ static void htvec_reset(struct htvec *priv)
 	u32 idx;
 
 	/* Clear IRQ cause registers, mask all interrupts */
-	for (idx = 0; idx < VEC_REG_COUNT; idx++) {
+	for (idx = 0; idx < priv->num_parents; idx++) {
 		writel_relaxed(0x0, priv->base + HTVEC_EN_OFF + 4 * idx);
 		writel_relaxed(0xFFFFFFFF, priv->base);
 	}
@@ -157,7 +156,7 @@ static int htvec_of_init(struct device_node *node,
 				struct device_node *parent)
 {
 	struct htvec *priv;
-	int err, parent_irq[4], num_parents = 0, i;
+	int err, parent_irq[8], i;
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -176,19 +175,18 @@ static int htvec_of_init(struct device_node *node,
 		if (parent_irq[i] <= 0)
 			break;
 
-		num_parents++;
+		priv->num_parents++;
 	}
 
-	if (!num_parents) {
+	if (!priv->num_parents) {
 		pr_err("Failed to get parent irqs\n");
 		err = -ENODEV;
 		goto iounmap_base;
 	}
 
 	priv->htvec_domain = irq_domain_create_linear(of_node_to_fwnode(node),
-						      VEC_COUNT,
-						      &htvec_domain_ops,
-						      priv);
+					(VEC_COUNT_PER_REG * priv->num_parents),
+					&htvec_domain_ops, priv);
 	if (!priv->htvec_domain) {
 		pr_err("Failed to create IRQ domain\n");
 		err = -ENOMEM;
@@ -197,7 +195,7 @@ static int htvec_of_init(struct device_node *node,
 
 	htvec_reset(priv);
 
-	for (i = 0; i < num_parents; i++)
+	for (i = 0; i < priv->num_parents; i++)
 		irq_set_chained_handler_and_data(parent_irq[i],
 						 htvec_irq_dispatch, priv);
 
-- 
2.7.0

[PATCH V2 5/5] irqchip: loongson-pch-pic: Fix the misused irq flow handler

[Huacai Chen]

Loongson PCH PIC is a standard level triggered PIC, and it need to clear
interrupt during unmask.

Fixes: ef8c01eb64ca6719da449dab0 ("irqchip: Add Loongson PCH PIC controller")
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
---
 drivers/irqchip/irq-loongson-pch-pic.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c
index 2a05b93..61d06df 100644
--- a/drivers/irqchip/irq-loongson-pch-pic.c
+++ b/drivers/irqchip/irq-loongson-pch-pic.c
@@ -64,15 +64,6 @@ static void pch_pic_bitclr(struct pch_pic *priv, int offset, int bit)
 	raw_spin_unlock(&priv->pic_lock);
 }
 
-static void pch_pic_eoi_irq(struct irq_data *d)
-{
-	u32 idx = PIC_REG_IDX(d->hwirq);
-	struct pch_pic *priv = irq_data_get_irq_chip_data(d);
-
-	writel(BIT(PIC_REG_BIT(d->hwirq)),
-			priv->base + PCH_PIC_CLR + idx * 4);
-}
-
 static void pch_pic_mask_irq(struct irq_data *d)
 {
 	struct pch_pic *priv = irq_data_get_irq_chip_data(d);
@@ -85,6 +76,9 @@ static void pch_pic_unmask_irq(struct irq_data *d)
 {
 	struct pch_pic *priv = irq_data_get_irq_chip_data(d);
 
+	writel(BIT(PIC_REG_BIT(d->hwirq)),
+			priv->base + PCH_PIC_CLR + PIC_REG_IDX(d->hwirq) * 4);
+
 	irq_chip_unmask_parent(d);
 	pch_pic_bitclr(priv, PCH_PIC_MASK, d->hwirq);
 }
@@ -124,7 +118,6 @@ static struct irq_chip pch_pic_irq_chip = {
 	.irq_mask		= pch_pic_mask_irq,
 	.irq_unmask		= pch_pic_unmask_irq,
 	.irq_ack		= irq_chip_ack_parent,
-	.irq_eoi		= pch_pic_eoi_irq,
 	.irq_set_affinity	= irq_chip_set_affinity_parent,
 	.irq_set_type		= pch_pic_set_type,
 };
@@ -150,7 +143,7 @@ static int pch_pic_alloc(struct irq_domain *domain, unsigned int virq,
 
 	irq_domain_set_info(domain, virq, hwirq,
 			    &pch_pic_irq_chip, priv,
-			    handle_fasteoi_ack_irq, NULL, NULL);
+			    handle_level_irq, NULL, NULL);
 	irq_set_probe(virq);
 
 	return 0;
-- 
2.7.0

Re: [PATCH V2 0/5] MIPS: Loongson64: Fix and improve irqchip drivers

[Marc Zyngier]

On Thu, 30 Jul 2020 16:51:25 +0800, Huacai Chen wrote:
> Modernized Loongson64 platforms use a hierarchical interrupt controller
> architecture. For LS7A PCH, the hierarchy (from inside to outside) is
> CPUINTC --> LIOINTC --> HTVEC --> PCHPIC/PCHMSI. However, the current
> status is that there are several bugs in the LIOINTC and PCHPIC drivers,
> and the HTVEC driver should be improved to support 8 groups of vectors.
> Loonson64C support only 4 groups of HT vectors, and Loongson64G support
> as many as 8 groups, so the .dts file and dt-bindings description should
> also be updated.
> 
> [...]

Applied to irq/irqchip-next, thanks!

[1/5] dt-bindings: interrupt-controller: Update Loongson HTVEC description
      commit: 8fea4b2e804ab8ff93bd0d67a3dadee1d1a3e24f
[3/5] irqchip/loongson-liointc: Fix misuse of gc->mask_cache
      commit: c9c73a05413ea4a465cae1cb3593b01b190a233f
[4/5] irqchip/loongson-htvec: Support 8 groups of HT vectors
      commit: c47e388cfc648421bd821f5d9fda9e76eefe29cd
[5/5] irqchip/loongson-pch-pic: Fix the misused irq flow handler
      commit: ac62460c24126eb2442e3653a266ebbf05b004d8

Please note that I haven't taken patch #2, as it doesn't apply on top 
of irqchip/next. Please route it via the MIPS tree.

Cheers,

	M.
-- 
Without deviation from the norm, progress is not possible.

Re: [PATCH V2 0/5] MIPS: Loongson64: Fix and improve irqchip drivers

[Thomas Bogendoerfer]

On Thu, Jul 30, 2020 at 01:06:03PM +0100, Marc Zyngier wrote:
> On Thu, 30 Jul 2020 16:51:25 +0800, Huacai Chen wrote:
> > Modernized Loongson64 platforms use a hierarchical interrupt controller
> > architecture. For LS7A PCH, the hierarchy (from inside to outside) is
> > CPUINTC --> LIOINTC --> HTVEC --> PCHPIC/PCHMSI. However, the current
> > status is that there are several bugs in the LIOINTC and PCHPIC drivers,
> > and the HTVEC driver should be improved to support 8 groups of vectors.
> > Loonson64C support only 4 groups of HT vectors, and Loongson64G support
> > as many as 8 groups, so the .dts file and dt-bindings description should
> > also be updated.
> > 
> > [...]
> 
> Applied to irq/irqchip-next, thanks!
> 
> [1/5] dt-bindings: interrupt-controller: Update Loongson HTVEC description
>       commit: 8fea4b2e804ab8ff93bd0d67a3dadee1d1a3e24f
> [3/5] irqchip/loongson-liointc: Fix misuse of gc->mask_cache
>       commit: c9c73a05413ea4a465cae1cb3593b01b190a233f
> [4/5] irqchip/loongson-htvec: Support 8 groups of HT vectors
>       commit: c47e388cfc648421bd821f5d9fda9e76eefe29cd
> [5/5] irqchip/loongson-pch-pic: Fix the misused irq flow handler
>       commit: ac62460c24126eb2442e3653a266ebbf05b004d8
> 
> Please note that I haven't taken patch #2, as it doesn't apply on top 
> of irqchip/next. Please route it via the MIPS tree.

I'll take it.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]