* hello
@ 2002-03-18 23:55 David Christensen
2002-03-18 23:55 ` hello David Christensen
` (2 more replies)
0 siblings, 3 replies; 14+ messages in thread
From: David Christensen @ 2002-03-18 23:55 UTC (permalink / raw)
To: linux-mips
linux-mips@oss.sgi.com:
Hello! I have the opportunity to work on MIPS Linux using a MIPS Atlas
(4Kc) board.
1. Is there a reason why SourceForge isn't being used for the MIPS
Linux project?
2. What is the preferred host OS for MIPS Linux kernel and application
cross development (especially the MIPS Altas)?
3. What is the preferred toolchain for MIPS Linux kernel and
application cross development (especially the MIPS Altas)?
4. Is MIPS Linux self-hosted?
5. Can you do native development on MIPS Linux?
6. Does MIPS Linux support sound (oss or alsa) on any platform? Does
it support sound on MIPS Atlas?
TIA,
David
^ permalink raw reply [flat|nested] 14+ messages in thread
* hello
2002-03-18 23:55 hello David Christensen
@ 2002-03-18 23:55 ` David Christensen
[not found] ` <200203182235.g2IMZiM01720@localhost.localdomain>
2002-03-19 12:11 ` hello Florian Lohoff
2 siblings, 0 replies; 14+ messages in thread
From: David Christensen @ 2002-03-18 23:55 UTC (permalink / raw)
To: linux-mips
linux-mips@oss.sgi.com:
Hello! I have the opportunity to work on MIPS Linux using a MIPS Atlas
(4Kc) board.
1. Is there a reason why SourceForge isn't being used for the MIPS
Linux project?
2. What is the preferred host OS for MIPS Linux kernel and application
cross development (especially the MIPS Altas)?
3. What is the preferred toolchain for MIPS Linux kernel and
application cross development (especially the MIPS Altas)?
4. Is MIPS Linux self-hosted?
5. Can you do native development on MIPS Linux?
6. Does MIPS Linux support sound (oss or alsa) on any platform? Does
it support sound on MIPS Atlas?
TIA,
David
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hello
[not found] ` <200203182235.g2IMZiM01720@localhost.localdomain>
@ 2002-03-19 2:01 ` David Christensen
2002-03-19 2:01 ` hello David Christensen
0 siblings, 1 reply; 14+ messages in thread
From: David Christensen @ 2002-03-19 2:01 UTC (permalink / raw)
To: LEO; +Cc: linux-mips
Leo:
> http://linux-mips.sourceforge.net/
>
> Fully equipped with toolchain howto and all.
OK thanks for the pointer. I searched SourceForge for "MIPS Linux"
before posting to linux-mips@oss.sgi.com, and came up with "MIPS Linux"
and "Linux MIPS". Neither project had released files, so I thought they
were dead. Should I continue to use the linux-mips@oss.sgi.com mailing
list, or switch to linux-mips on SourceForge?
David
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hello
2002-03-19 2:01 ` hello David Christensen
@ 2002-03-19 2:01 ` David Christensen
0 siblings, 0 replies; 14+ messages in thread
From: David Christensen @ 2002-03-19 2:01 UTC (permalink / raw)
To: LEO; +Cc: linux-mips
Leo:
> http://linux-mips.sourceforge.net/
>
> Fully equipped with toolchain howto and all.
OK thanks for the pointer. I searched SourceForge for "MIPS Linux"
before posting to linux-mips@oss.sgi.com, and came up with "MIPS Linux"
and "Linux MIPS". Neither project had released files, so I thought they
were dead. Should I continue to use the linux-mips@oss.sgi.com mailing
list, or switch to linux-mips on SourceForge?
David
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hello
2002-03-18 23:55 hello David Christensen
2002-03-18 23:55 ` hello David Christensen
[not found] ` <200203182235.g2IMZiM01720@localhost.localdomain>
@ 2002-03-19 12:11 ` Florian Lohoff
2002-03-19 12:14 ` hello Adrian Schroeter
2 siblings, 1 reply; 14+ messages in thread
From: Florian Lohoff @ 2002-03-19 12:11 UTC (permalink / raw)
To: David Christensen; +Cc: linux-mips
[-- Attachment #1: Type: text/plain, Size: 1493 bytes --]
On Mon, Mar 18, 2002 at 03:55:00PM -0800, David Christensen wrote:
> linux-mips@oss.sgi.com:
>
> Hello! I have the opportunity to work on MIPS Linux using a MIPS Atlas
> (4Kc) board.
>
> 1. Is there a reason why SourceForge isn't being used for the MIPS
> Linux project?
The Linux-mips project is much older than sourceforge and looking at the
history of hyped venture capital companys does not really give a good
feeling about using sourceforge. Personally spoken i dont like
sourceforge - For most cases its just too bloated and working for ISPs
its not a problem to get some public accesible ftp/web/cvs space.
> 4. Is MIPS Linux self-hosted?
Definitly
> 5. Can you do native development on MIPS Linux?
Yep - The Debian autobuilder run native on little and big endian.
> 6. Does MIPS Linux support sound (oss or alsa) on any platform? Does
> it support sound on MIPS Atlas?
Some rumors about Indy/Indigo2 HAL support have been heard.
The problem with some sourceforge trees and thesplit up information is
that like you already experienced is a real problem for Linux-mips
as there is no "source of the only wisdom". I dont like that
tree-forking etc. Either build your stuff clean - ready for inclusion -
or just drop the tree under the table as a big bad ugly hack.
Flo
--
Florian Lohoff flo@rfc822.org +49-5201-669912
Nine nineth on september the 9th Welcome to the new billenium
[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hello
2002-03-19 12:11 ` hello Florian Lohoff
@ 2002-03-19 12:14 ` Adrian Schroeter
2002-03-19 12:14 ` hello Adrian Schroeter
0 siblings, 1 reply; 14+ messages in thread
From: Adrian Schroeter @ 2002-03-19 12:14 UTC (permalink / raw)
To: Florian Lohoff; +Cc: David Christensen, linux-mips
On Tue, 19 Mar 2002, Florian Lohoff wrote:
> On Mon, Mar 18, 2002 at 03:55:00PM -0800, David Christensen wrote:
> > 6. Does MIPS Linux support sound (oss or alsa) on any platform? Does
> > it support sound on MIPS Atlas?
>
> Some rumors about Indy/Indigo2 HAL support have been heard.
oss works for me here on Indy/Indigo2. The arts drivers seems to be too
outdated atm.
bye
adrian
**********************************************************************
Adrian Schroeter
SuSE AG, Deutschherrnstr. 15-19, 90429 Nuernberg, Germany
email: adrian@suse.de (495 mails already received today.)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hello
2002-03-19 12:14 ` hello Adrian Schroeter
@ 2002-03-19 12:14 ` Adrian Schroeter
0 siblings, 0 replies; 14+ messages in thread
From: Adrian Schroeter @ 2002-03-19 12:14 UTC (permalink / raw)
To: Florian Lohoff; +Cc: David Christensen, linux-mips
On Tue, 19 Mar 2002, Florian Lohoff wrote:
> On Mon, Mar 18, 2002 at 03:55:00PM -0800, David Christensen wrote:
> > 6. Does MIPS Linux support sound (oss or alsa) on any platform? Does
> > it support sound on MIPS Atlas?
>
> Some rumors about Indy/Indigo2 HAL support have been heard.
oss works for me here on Indy/Indigo2. The arts drivers seems to be too
outdated atm.
bye
adrian
**********************************************************************
Adrian Schroeter
SuSE AG, Deutschherrnstr. 15-19, 90429 Nuernberg, Germany
email: adrian@suse.de (495 mails already received today.)
^ permalink raw reply [flat|nested] 14+ messages in thread
* hello
@ 2019-12-19 1:02 Mr Lili
0 siblings, 0 replies; 14+ messages in thread
From: Mr Lili @ 2019-12-19 1:02 UTC (permalink / raw)
To: linux-mips
Hello,
My name is Mr.Song Lile (I work with a Bank as an account officer
in the
Treasury/Credit Control Unit) I want to solicit your attention to
receive the money on my behalf.
The purpose of my contacting you is because you live in outside
Hong Kong.
When you reply this message, I will send you the full details and
more
information about myself and the funds.
Thank you.
Kindest regards,
Mr.Song Lile
songlile110@gmail.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Hello
@ 2017-10-04 12:39 Ms.Lev
0 siblings, 0 replies; 14+ messages in thread
From: Ms.Lev @ 2017-10-04 12:39 UTC (permalink / raw)
To: Recipient
I am getting in touch with you regarding an extremely important and urgent matter. If you would oblige me the opportunity, I shall provide you with details upon your
response.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hello
2007-11-14 4:00 hello David Kuk
@ 2007-11-14 7:55 ` Freddy Spierenburg
0 siblings, 0 replies; 14+ messages in thread
From: Freddy Spierenburg @ 2007-11-14 7:55 UTC (permalink / raw)
To: David Kuk; +Cc: linux-mips
[-- Attachment #1: Type: text/plain, Size: 1027 bytes --]
Hi David,
On Wed, Nov 14, 2007 at 12:00:28PM +0800, David Kuk wrote:
> I am a new guy for both linux and mips, may i ask questions here ??
If your question is Linux kernel and MIPS related, go ahead! You
don't need to ask if you may ask a question, just fire it up!
If it is more user-land related in the sense of how can I unpack
a tarball or the like, you might wander of to some other places
like http://www.linuxquestions.org/.
As a general rule of thumb; look at the small description of a
list on a page like:
http://www.linux-mips.org/wiki/Net_Resources#Mailing_lists
and see what kind of questions other people ask on the list
archive: http://www.linux-mips.org/archives/
This is true not only for the linux-mips community, but for the
rest too. Good luck!
--
$ cat ~/.signature
Freddy Spierenburg <freddy@dusktilldawn.nl> http://freddy.snarl.nl/
GnuPG: 0x7941D1E1=C948 5851 26D2 FA5C 39F1 E588 6F17 FD5D 7941 D1E1
$ # Please read http://www.ietf.org/rfc/rfc2015.txt before complain!
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* hello
@ 2007-11-14 4:00 David Kuk
2007-11-14 7:55 ` hello Freddy Spierenburg
0 siblings, 1 reply; 14+ messages in thread
From: David Kuk @ 2007-11-14 4:00 UTC (permalink / raw)
To: linux-mips
Hi all
I am a new guy for both linux and mips, may i ask questions here ??
THX
^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: Hello
@ 2004-07-03 0:28 send mail ONLY to cond-mat
0 siblings, 0 replies; 14+ messages in thread
From: send mail ONLY to cond-mat @ 2004-07-03 0:28 UTC (permalink / raw)
To: linux-mips
cond-mat@arXiv.org is a fully automated e-print archive for
condensed matter preprints (starting from April, 1992)
The list of subject classes within cond-mat is:
Disordered Systems and Neural Networks,
Materials Science (the mtrl-th archive has been moved into cond-mat),
Mesoscopic Systems and Quantum Hall Effect,
Soft Condensed Matter,
Statistical Mechanics,
Strongly Correlated Electrons,
Superconductivity (the supr-con archive has been moved into cond-mat)
(From Nov, 1994 though September 1996, there were also archives
mtrl-th for materials theory, and supr-con for superconductivity.)
To communicate with the archive via e-mail, send messages to
cond-mat@arXiv.org
WorldWideWeb access is available via "http://arXiv.org/"
Anonymous ftp access is available via arXiv.org
-------------------------------------------------------------------------
-------------------------------------------------------------------------
In the generic arXiv help text, substitute cond-mat@arXiv.org
for the generic e-mail address arch-ive@arXiv.org
-------------------------------------------------------------------------
-------------------------------------------------------------------------
Outgoing mail from the e-print archive has the username no-reply
(to avoid problems due to occasional mail that bounces back).
Commands to the system should always be sent to arch-ive@arXiv.org
with the command in the subject field (e.g. Subject: help).
Only one command at a time is accepted. Subscribers automatically
receive a listing of new titles/abstracts on days papers are received.
You will have a more pleasurable time using the archives if you read this
file carefully, read ALL responses you get to your interactions
with the archives, and follow the instructions therein.
This help file summarizes the email interface commands.
This information can be more easily accessed via the WorldWideWeb
at http://arXiv.org/help/ .
==========================================================================
Additional help is available by using the `get' command to retrieve the
following files:
(this file): summary of e-mail commands
prep.txt: how to prepare your abstract and paper for submission
submit.txt: instructions for submitting to the archive
eput.txt: instructions for e-mail submissions,
including appraisal of different packaging formats
fput.txt: how to use anonymous ftp to put and replace papers
utilities.txt: utilities and applications to install for use
with the archives, and where to find them for many platforms
sizes.txt: how to slim down your PostScript files
==========================================================================
Summary of Commands for the e-Mail Interface:
All commands to arch-ive@xxx may be abbreviated by any truncation that includes
at least the first three letters (e.g. rep, sub, can, dis, lis, com, ...).
(The term arch-ive a generic one; substitute an appropriate archive name like
hep-th when actually doing something). The command must be given in the
subject field (e.g., Subject: help ).
Commands for retrieving information
(get, cget, uget, list, find, distribution):
get <paper#> <macroname>
Returns paper specified by paper# (e.g. `get 9109001'), or macro specified
by macroname.
For abstracts alone, append .abs to the paper# (e.g. `get 9109001.abs').
Multiple requests in one `get' are allowed and preferred.
For example, `get 3 2.abs 9108001' returns multiple papers and abstracts.
get defaults to the current year/month so that during 10/91,
`get 1 2 5' or `get 01 2 005' will automatically prepend 9110's and the
necessary zeroes to result in `get 9110001 9110002 9110005'.
Numbers too large for the current year/month will have the previous
year/month prepended. get also defaults to the current year, e.g.
`get 9005' during 1995 gives `get 9509005', and months/numbers too big
for the current year default to the previous year.
You can freely mix formats, as in `get 1 08005 harvmac.tex 9109058 2.abs'.
As of 1 Jan 1996, the get command returns a single uuencoded, gzipped,
tar archive containing all files in a submission (except in the case
of a submission consisting of a single file [e.g. TeX, PS, or PDF],
which is instead just gzipped [i.e. not tarred] and uuencoded for e-mail).
For utilities to unpack these, read utilities.txt
(available via `get utilities.txt'). For those unable to process this new
format, there is now the `uget' command.
cget <paper#>
Same as the get command, but the file is cut into multiple parts
of size < 100 kB (195 blocks) to accommodate certain capricious
or limited mail routers and to speed bitnet transmission.
uget <paper#>
Same as the get command, but files are unpacked from our storage
format (gzipped tar files) and sent out individually. Meant for those
unable to adapt to our new (1 Jan 1996) packaging. Users should feel
encouraged to modernize to use gzip and tar (see utilities.txt
for more info, including cross-platform availability) in order to use
the normal get command.
listing
Returns list of year/month's currently available
list <yymm's macros new pastweek>
Returns title/author's of papers currently held for given year/month
subset, e.g. `list 9109'.
`list macros' returns a list of the available TeX macros and various
utilities such as reform and uufiles.
`list new' resends the most recently sent title/abstract listing
of papers received (typically from the previous day).
`list pastweek' returns past week of title/author listings.
For title/author/abstract's of papers held for given yr/mo subsets,
append .abs: e.g. `list 9109.abs 9110.abs'
multiple requests allowed: e.g. `list 9109 9110.abs macros new pastweek'
clist <yymm.abs ...>
Same as the list command, but files are cut into multiple parts
of size < 100 kB (195 blocks) to accommodate certain capricious
or limited mail routers and to speed bitnet transmission.
find <search-string>
Searches the title/author list for search-string (either author or word in
title, case insensitive) to retrieve paper number, e.g. `find goldstone'.
Find defaults to the past 12 months, so for earlier years use e.g.
`find goldstone 91'.
distribution <name>
Search for `name' in e-mail distribution list.
Commands for submitting information:
(put, fput, replace, freplace, figures, add, cross, published)
put
Submit a paper (body of the message must be in the format
described in prep.txt, available via `get prep.txt').
Paper will be assigned a paper number, and added to the listings
(do not `put' the same paper to more than one e-print archive, instead use
the `cross' command to cross list the paper). Never `put' the same
paper twice. Instead use the `replace' command.
The preferred format for `put' is TeX/LaTeX source. Please don't submit
PostScript generated from TeX. We have an automatic TeX'ing script on-line
that will generate PostScript from your TeX source. As of
1 Jan 1996, all submissions are tested for automatic PostScript generation
before they can be entered into the archives.
See neworder.txt for more info.
fput <filename1 ... filenameN>
Submit a paper using ftp. First transfer files (filename1 ...) for
paper via anonymous ftp to arXiv.org's /incoming ftp directory.
Body of `fput' e-mail message is in same format as that of `put' command
(i.e. title/author and abstract fields delimited by \\'s), as described
in prep.txt, but nothing need follow the final \\
terminating the abstract. It is advisable to read the complete fput help
before using (available via `get fput.txt' ).
replace <paper#>
Replace a paper specified by paper# with a revised version (only
original submitter can do this, from the original e-mail account).
The paper should be resubmitted in the same format as for the
`put' command. Be sure to include the full abstract, since this is
replaced as well, although it won't appear in the daily mailing
(unless the `replace' is on the same day as the `put').
The Comments: field (i.e. after Title: and Authors: ) should contain a
short comment describing the severity of the changes so that others
can determine if it is worth their time to get your paper again.
Remember to include your original Comments: as well, because the
replacement wipes these out, and
the original comments still contain useful information.
Any cross-listed entries, e.g. hep-ph/9204201 already cross-listed to
hep-th, are automatically replaced, e.g. on hep-th, when you replace
hep-ph/9204201 on hep-ph -- additional action is no longer necessary.
You must resend all files contained in your submission. You can only
replace your entire submission. There is no way to replace only part
of it (e.g. a single figure).
In addition, replacements are subject to the same test for automatic
processing as for puts.
As of 1 Jan 1996, the text of the original submission is retained
if it is replaced after the first day (i.e, if it has already appeared in a
newlistings mailing). This is to prevent excessive backdating of content.
(The original submissions are not currently publicly available, but
will probably be made so at some later date.)
If you are replacing a paper to update the results because of subsequent
work by others, we require that you exercise professional
courtesy and refer to this work, preferably in the Comments: field.
(This avoids sticky priority disputes.)
The replace command can be used to withdraw a paper from the archives.
You cannot completely remove a paper that has appeared in a mailing;
you can only replace it with a statement that it is withdrawn.
freplace <paper#> <filename1 ... filenameN>
Submit a replacement using anonymous ftp, where filename1 ... have
already been deposited to arXiv.org's /incoming ftp directory.
The paper number must be the FIRST argument.
The body of an `freplace' message is the same as that for `fput'.
Remember to include the full abstract.
It is advisable to read the complete `fput/freplace' help before using
(available via `get fput.txt'). The caveats for the replace command
apply here as well.
figures <paper#>
This command is now obsolete (1 Jan '96). All files should be sent in a
single package. See eput.txt for more info.
add <paper#>
This command is now obsolete (1 Jan '96). If your mailer imposes size
limits on outgoing mail, than you must use fput or freplace.
cross <arch-ive/paper#>
Cross-list paper from another e-print archive. e.g.
a) first put paper To: hep-ph@arXiv.org which assigns it hep-ph/9204201
b) wait until you see your paper listing in the next daily mailing.
This is important because paper numbers are not permanent until then.
c) then send an e-mail message (with blank message body)
To: astro-ph@arXiv.org
Subject: cross hep-ph/9204201
so that the hep-ph entry will appear as well on astro-ph.
(NOTE: In the above case of a paper originally submitted to hep-ph,
obviously do not send the cross-list command To: hep-ph@arXiv.org .)
Generates abstract entry for daily listings and for access
by `find' and `list' commands. Cross-listed papers must be obtained
directly from the archive where the paper was originally submitted (i.e.
hep-ph in example above).
To cross-list to an archive that allows (or requires) subject classes,
include your desired subject class at the end of the cross command, e.g.
To: physics@arXiv.org
Subject: cross hep-th/9611010 Mathematical Methods in Physics
This can also be used to cross-list submissions to different
subject classes within an archive, e.g., for a submission originally
submitted to the cond-mat archive with Subj-class: Materials Science,
To: cond-mat@arXiv.org
Subject: cross cond-mat/9611010 Superconductivty
will add Superconductivity as a secondary subject class.
Note that cross-listings should not be abused and inappropriate crosses
will be removed.
published <paper#> <reference>
Adds a Journal reference to paper's entry, accessible via `find', `list',
`list [].abs', `get [].abs' commands;
e.g., `published 9107001 Rec. Jnl. 180 (1992) 101'.
Journal-ref's should be complete bibliographic references, i.e. they
should include the journal name, volume, year, and page number. Anything
short of this belongs in the Comments: field.
Subscription commands
(subscribe, cancel, subscribe all, cancel all):
subscribe <your full name>
Add new username to daily distribution list (e-mail address will
automatically be extracted from return address), `your full name'
is your full name (any number of words and initials) as you wish
it to appear on the distribution list. <<<Note: `suscribe' is not
a word>>> (It is of course no longer obvious why people subscribe
for intrusive e-mail receipt of abstracts when they have www
access on-demand from http://arXiv.org/ ). e-Mail addresses that
bounce three consecutive times are automatically cancelled. If you do
not receive a response to your `subscribe' message, it is most likely
because your mailer is misconfigured and the return address in the
From: line or Reply-To: line is broken. We have no way of contacting you
if this is the case, so you are on your own to figure out what is wrong.
cancel
Remove user@nodename from daily distribution list. The e-mail address is
extracted automatically, so cancel message must be sent from the same
account as originally used to subscribe.
Note that you may be subscribed instead through a remote listserv,
or through some local preprint distribution list at your end.
You can determine the origin of your subscription by examining the
the header from the daily mailing you receive.
If you no longer have access to your original subscription account,
the administrators at arXiv.org may be able to cancel it for you.
Send request as a comment, and be certain to
to include the entire header of a daily abstract mailing that you have
received so that we can determine how you are subscribed. (Do not send
a useless header from the failed `cancel' or from a `get', etc.)
subscribe all <password>
Receive daily list of changes to database. The list of changes comes
formatted in a form suitable for automated ftp scripts. The password
will be added to the Subject: line of the daily message so that
automated scripts can be reasonably sure that the messages are authentic.
Don't use your account password. If you do not include a password
then a random one will automatically be generated for you.
cancel all
Cancel previously entered `subscribe all' (i.e. in order to no longer
receive daily list of changes to database). `cancel all' will not
cancel a regular subscription (one that sends you the complete abstracts
each day). You must use the `cancel' command for
each individual archive to which you are subscribed.
Miscellaneous commands
(comment, help):
comment
Forward message for human perusal. If you have any doubts about
how to submit something or where it should go, you can use this
command to ask questions. They are usually answered on a one day
turn around, often sooner. Style files of use to other authors
can also be sent in, along with a one-line description of the style.
help
Returns this file.
---------------------------------------------------------------------
Do not make multiple requests for the same paper. If you receive nothing
(or if the response is slow) it means there is a problem at your end.
Anonymous ftp for getting and retrieving files is enabled on arXiv.org.
use login: anonymous
password: yourusername
The relevant directories are listings and papers (the latter has
subdirectories 9108, 9109, ... ). If you are not already familiar with
anonymous ftp, this is not a good place to practice.
Papers can be put on the archives via anonymous ftp using `fput' and
`freplace' (see above, or `get fput.txt' for further info).
For european users, many of these databases are mirrored as
the equivalent arch-ive@babbage.sissa.it, which allows access both via the
above e-mail requests and via anonymous ftp.
WorldWideWeb access is available via http://arXiv.org/
and other mirror sites worldwide
Some other e-print archives running the same software:
Physics
hep-th@arXiv.org High Energy Physics - Theory, 8/91
hep-lat@arXiv.org High Energy Physics - Lattice, 2/92
hep-ph@arXiv.org High Energy Physics - Phenomenology, 3/92
astro-ph@arXiv.org Astrophysics, 4/92
cond-mat@arXiv.org Condensed Matter, 4/92
gr-qc@arXiv.org General Relativity and Quantum Cosmology, 7/92
nucl-th@arXiv.org Nuclear Theory, 10/92
chem-ph@arXiv.org Chemical Physics, 3/94
hep-ex@arXiv.org High Energy Physics - Experiment, 4/94
acc-phys@arXiv.org Accelerator Physics, 11/94
mtrl-th@arXiv.org Materials Theory, 11/94
supr-con@arXiv.org Superconductivity, 11/94
nucl-ex@arXiv.org Nuclear Experiment, 12/94
quant-ph@arXiv.org Quantum Physics, 12/94
atom-ph@arXiv.org Atomic, Molecular and Optical Physics, 9/95
plasm-ph@arXiv.org Plasma Physics, 9/95
physics@arXiv.org Physics, 10/96
Mathematics
alg-geom@arXiv.org Algebraic Geometry, 2/92
funct-an@arXiv.org Functional Analysis, 4/92
dg-ga@arXiv.org Differential Geometry, 6/94
q-alg@qrXiv.org Quantum Algebra and Topology, 12/94
Other
nlin-sys@arXiv.org Nonlinear Sciences, 1/93
cmp-lg@arXiv.org Computation and Language, 4/94
ao-sci@arXiv.org Atmospheric-Oceanic Sciences, 2/95
---------------------------------------------------------------------
Disclaimer:
Problems printing a paper should be directed to its authors.
Papers will be entered in the listings in order of receipt on an impartial
basis and appearance of a paper is not intended in any way to convey
tacit approval of its assumptions, methods, or conclusions by any agent
(electronic, mechanical, or other).
We reserve the right to reject any inappropriate submissions.
This e-print archive should not be used to distribute non-technical information
(such as news or information about political causes of potential special
interest to the academic community). Finally, this is an e-print archive.
Submissions of an abstract without a paper will be rejected outright.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Hello
2004-04-13 9:38 Hello Benjamin Collar
@ 2004-04-13 10:06 ` Yoichi Yuasa
0 siblings, 0 replies; 14+ messages in thread
From: Yoichi Yuasa @ 2004-04-13 10:06 UTC (permalink / raw)
To: Benjamin Collar; +Cc: yuasa, linux-mips
On Tue, 13 Apr 2004 11:38:22 +0200
Benjamin Collar <collar@onlinehome.de> wrote:
> Greetings
>
> I've joined this mailing list because I've started a new project: I want to
> port linux 2.6 to the Agenda VR3 PDA.
>
> The Agenda already runs Linux--2.4.0 I think, based on the kernel that was at
> linux-vr.org but now appears to be gone.
>
> I'm totally a beginner here, so please bear with me :)
>
> What I'm doing at the moment is, I'm trying to understand where all of the
> code has gone! There is a different directory structure in 2.6. If someone
> can answer these questions, I'd very much appreciate it:
>
> 1. What's the difference between a NEC 4181 and NEC 41xx? In 2.6 there are
> subdirectories for each of these, while in the VR kernel all the code was in
> arch/mips/41xx. The Agenda is a 4181. Should I be using the 4181 common code
> or the 41xx?
VR4181 is not same as other VR4100 series.
We already have codes for VR4181 in arch/mips/vr4181.
You can start from these codes.
> 2. Where did linux-vr go? Does anyone know where I can get the patches?
http://www.linux-mips.org/cvsweb/linux-vr/
Yoichi
^ permalink raw reply [flat|nested] 14+ messages in thread
* Hello
@ 2004-04-13 9:38 Benjamin Collar
2004-04-13 10:06 ` Hello Yoichi Yuasa
0 siblings, 1 reply; 14+ messages in thread
From: Benjamin Collar @ 2004-04-13 9:38 UTC (permalink / raw)
To: linux-mips
Greetings
I've joined this mailing list because I've started a new project: I want to
port linux 2.6 to the Agenda VR3 PDA.
The Agenda already runs Linux--2.4.0 I think, based on the kernel that was at
linux-vr.org but now appears to be gone.
I'm totally a beginner here, so please bear with me :)
What I'm doing at the moment is, I'm trying to understand where all of the
code has gone! There is a different directory structure in 2.6. If someone
can answer these questions, I'd very much appreciate it:
1. What's the difference between a NEC 4181 and NEC 41xx? In 2.6 there are
subdirectories for each of these, while in the VR kernel all the code was in
arch/mips/41xx. The Agenda is a 4181. Should I be using the 4181 common code
or the 41xx?
2. Where did linux-vr go? Does anyone know where I can get the patches?
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2019-12-20 10:04 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-03-18 23:55 hello David Christensen
2002-03-18 23:55 ` hello David Christensen
[not found] ` <200203182235.g2IMZiM01720@localhost.localdomain>
2002-03-19 2:01 ` hello David Christensen
2002-03-19 2:01 ` hello David Christensen
2002-03-19 12:11 ` hello Florian Lohoff
2002-03-19 12:14 ` hello Adrian Schroeter
2002-03-19 12:14 ` hello Adrian Schroeter
2004-04-13 9:38 Hello Benjamin Collar
2004-04-13 10:06 ` Hello Yoichi Yuasa
2004-07-03 0:28 Hello send mail ONLY to cond-mat
2007-11-14 4:00 hello David Kuk
2007-11-14 7:55 ` hello Freddy Spierenburg
2017-10-04 12:39 Hello Ms.Lev
2019-12-19 1:02 hello Mr Lili
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).