From: Nathan Sullivan <nathan.sullivan@ni.com> To: Rob Herring <robh@kernel.org> Cc: <linus.walleij@linaro.org>, <gnurou@gmail.com>, <mark.rutland@arm.com>, <devicetree@vger.kernel.org>, <ralf@linux-mips.org>, <linux-kernel@vger.kernel.org>, <linux-gpio@vger.kernel.org>, <linux-mips@linux-mips.org> Subject: Re: [PATCH 2/2] MIPS: NI 169445 board support Date: Fri, 24 Mar 2017 09:46:40 -0500 [thread overview] Message-ID: <20170324144640.GA2483@nathan3500-linux-VM> (raw) In-Reply-To: <20170323222945.bxz4qa6ydicrh4q6@rob-hp-laptop> On Thu, Mar 23, 2017 at 05:29:45PM -0500, Rob Herring wrote: > On Tue, Mar 14, 2017 at 11:13:23AM -0500, Nathan Sullivan wrote: > > Support the National Instruments 169445 board. > > > > Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> > > --- > > Documentation/devicetree/bindings/mips/ni.txt | 7 ++ > > MAINTAINERS | 8 ++ > > arch/mips/boot/dts/Makefile | 1 + > > arch/mips/boot/dts/ni/169445.dts | 100 ++++++++++++++++++++++++ > > arch/mips/boot/dts/ni/Makefile | 7 ++ > > arch/mips/configs/generic/board-ni169445.config | 27 +++++++ > > arch/mips/generic/Kconfig | 6 ++ > > arch/mips/generic/vmlinux.its.S | 25 ++++++ > > 8 files changed, 181 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/mips/ni.txt > > create mode 100644 arch/mips/boot/dts/ni/169445.dts > > create mode 100644 arch/mips/boot/dts/ni/Makefile > > create mode 100644 arch/mips/configs/generic/board-ni169445.config > > > > diff --git a/Documentation/devicetree/bindings/mips/ni.txt b/Documentation/devicetree/bindings/mips/ni.txt > > new file mode 100644 > > index 0000000..722bf2d > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mips/ni.txt > > @@ -0,0 +1,7 @@ > > +National Instruments MIPS platforms > > + > > +required root node properties: > > + - compatible: must be "ni,169445" > > + > > +CPU Nodes > > + - compatible: must be "mti,mips14KEc" > > diff --git a/MAINTAINERS b/MAINTAINERS > > index c265a5f..b72f059 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -8887,6 +8887,14 @@ F: include/linux/sunrpc/ > > F: include/uapi/linux/nfs* > > F: include/uapi/linux/sunrpc/ > > > > +NI169445 MIPS ARCHITECTURE > > +M: Nathan Sullivan <nathan.sullivan@ni.com> > > +L: linux-mips@linux-mips.org > > +S: Maintained > > +F: arch/mips/boot/dts/ni/ > > +F: arch/mips/configs/generic/board-ni169445.config > > +F: Documentation/devicetree/bindings/mips/ni.txt > > + > > NILFS2 FILESYSTEM > > M: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> > > L: linux-nilfs@vger.kernel.org > > diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile > > index b9db492..27b0f37 100644 > > --- a/arch/mips/boot/dts/Makefile > > +++ b/arch/mips/boot/dts/Makefile > > @@ -4,6 +4,7 @@ dts-dirs += img > > dts-dirs += ingenic > > dts-dirs += lantiq > > dts-dirs += mti > > +dts-dirs += ni > > dts-dirs += netlogic > > dts-dirs += pic32 > > dts-dirs += qca > > diff --git a/arch/mips/boot/dts/ni/169445.dts b/arch/mips/boot/dts/ni/169445.dts > > new file mode 100644 > > index 0000000..9746576 > > --- /dev/null > > +++ b/arch/mips/boot/dts/ni/169445.dts > > @@ -0,0 +1,100 @@ > > +/dts-v1/; > > + > > +/ { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + compatible = "ni,169445"; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + cpu@0 { > > + device_type = "cpu"; > > + compatible = "mti,mips14KEc"; > > + clocks = <&baseclk>; > > + reg = <0>; > > + }; > > + }; > > + > > + memory@0 { > > + device_type = "memory"; > > + reg = <0x0 0x10000000>; > > + }; > > + > > + baseclk: baseclock { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <50000000>; > > + }; > > + > > + cpu_intc: cpu_intc { > > interrupt-controller { > > > + #address-cells = <0>; > > + compatible = "mti,cpu-interrupt-controller"; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + }; > > + > > + ahb@0 { > > ahb@1f300000 > > > + compatible = "simple-bus"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges = <0x0 0x1f300000 0x80FFF>; > > + > > + gpio1:gpio-controller@1f300010 { > ^ space > > 'gpio' is the standard node name, so > > gpio@... > > > + compatible = "ni,169445-nand-gpio"; > > + reg = <0x10 0x4>; > > + reg-names = "dat"; > > + gpio-controller; > > + #gpio-cells = <2>; > > + }; > > + > > + gpio2:gpio-controller@1f300014 { > > ditto > > > + compatible = "ni,169445-nand-gpio"; > > + reg = <0x14 0x4>; > > + reg-names = "dat"; > > + gpio-controller; > > + #gpio-cells = <2>; > > + no-output; > > + }; > > + > > + nand@1f300000 { > > + compatible = "gpio-control-nand"; > > + nand-on-flash-bbt; > > + nand-ecc-mode = "soft_bch"; > > + nand-ecc-step-size = <512>; > > + nand-ecc-strength = <4>; > > + reg = <0x0 4>; > > + gpios = <&gpio2 0 0>, /* rdy */ > > + <&gpio1 1 0>, /* nce */ > > + <&gpio1 2 0>, /* ale */ > > + <&gpio1 3 0>, /* cle */ > > + <&gpio1 4 0>; /* nwp */ > > + }; > > + > > + serial@1f380000 { > > + compatible = "ns16550a"; > > + reg = <0x80000 0x1000>; > > + interrupt-parent = <&cpu_intc>; > > + interrupts = <6>; > > + clocks = <&baseclk>; > > + reg-shift = <0>; > > + }; > > + > > + ethernet@1f340000 { > > + compatible = "snps,dwmac-4.10a"; > > + interrupt-parent = <&cpu_intc>; > > + interrupts = <5>; > > + interrupt-names = "macirq"; > > + reg = <0x40000 0x2000>; > > + clock-names = "stmmaceth", "pclk"; > > + clocks = <&baseclk>, <&baseclk>; > > + > > + phy-mode = "rgmii"; > > + > > + fixed-link { > > + speed = <1000>; > > + full-duplex; > > + }; > > + }; > > + }; > > +}; > > diff --git a/arch/mips/boot/dts/ni/Makefile b/arch/mips/boot/dts/ni/Makefile > > new file mode 100644 > > index 0000000..66cfdff > > --- /dev/null > > +++ b/arch/mips/boot/dts/ni/Makefile > > @@ -0,0 +1,7 @@ > > +dtb-$(CONFIG_FIT_IMAGE_FDT_NI169445) += 169445.dtb > > + > > +# Force kbuild to make empty built-in.o if necessary > > +obj- += dummy.o > > + > > +always := $(dtb-y) > > +clean-files := *.dtb *.dtb.S > > diff --git a/arch/mips/configs/generic/board-ni169445.config b/arch/mips/configs/generic/board-ni169445.config > > new file mode 100644 > > index 0000000..0bae1f8 > > --- /dev/null > > +++ b/arch/mips/configs/generic/board-ni169445.config > > @@ -0,0 +1,27 @@ > > +CONFIG_FIT_IMAGE_FDT_NI169445=y > > + > > +CONFIG_SERIAL_8250=y > > +CONFIG_SERIAL_8250_CONSOLE=y > > +CONFIG_SERIAL_OF_PLATFORM=y > > + > > +CONFIG_GPIOLIB=y > > +CONFIG_GPIO_SYSFS=y > > +CONFIG_GPIO_GENERIC_PLATFORM=y > > + > > +CONFIG_MTD=y > > +CONFIG_MTD_BLOCK=y > > +CONFIG_MTD_CMDLINE_PARTS=y > > + > > +CONFIG_MTD_NAND_ECC=y > > +CONFIG_MTD_NAND_ECC_BCH=y > > +CONFIG_MTD_NAND=y > > +CONFIG_MTD_NAND_GPIO=y > > +CONFIG_MTD_NAND_IDS=y > > + > > +CONFIG_MTD_UBI=y > > +CONFIG_MTD_UBI_BLOCK=y > > + > > +CONFIG_NETDEVICES=y > > +CONFIG_STMMAC_ETH=y > > +CONFIG_STMMAC_PLATFORM=y > > +CONFIG_DWMAC_GENERIC=y > > diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig > > index a606b3f..fbf0813 100644 > > --- a/arch/mips/generic/Kconfig > > +++ b/arch/mips/generic/Kconfig > > @@ -16,4 +16,10 @@ config LEGACY_BOARD_SEAD3 > > Enable this to include support for booting on MIPS SEAD-3 FPGA-based > > development boards, which boot using a legacy boot protocol. > > > > +config FIT_IMAGE_FDT_NI169445 > > + bool "Include FDT for NI 169445" > > + help > > + Enable this to include the FDT for the 169445 platform from > > + National Instruments in the FIT kernel image. > > + > > endif > > diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S > > index f67fbf1..de851f7 100644 > > --- a/arch/mips/generic/vmlinux.its.S > > +++ b/arch/mips/generic/vmlinux.its.S > > @@ -29,3 +29,28 @@ > > }; > > }; > > }; > > + > > +#ifdef CONFIG_FIT_IMAGE_FDT_NI169445 > > +/ { > > IMO, this shouldn't be in the kernel. Is the kernel supposed to > create board specific images for every bootloaders custom format? It > doesn't scale. > This is how the linux MIPS tree is doing generic kernels. Ralf, care to elaborate? The format is the same for each board, just with different trees and configurations. It's a little odd with just one board right now, the linux-mti tree has a bigger set. > > + images { > > + fdt@ni169445 { > > + description = "NI 169445 device tree"; > > + data = /incbin/("boot/dts/ni/169445.dtb"); > > + type = "flat_dt"; > > + arch = "mips"; > > + compression = "none"; > > + hash@0 { > > + algo = "sha1"; > > + }; > > + }; > > + }; > > + > > + configurations { > > + conf@ni169445 { > > + description = "NI 169445 Linux Kernel"; > > + kernel = "kernel@0"; > > + fdt = "fdt@ni169445"; > > + }; > > + }; > > +}; > > +#endif > > -- > > 2.1.4 > >
WARNING: multiple messages have this Message-ID (diff)
From: Nathan Sullivan <nathan.sullivan@ni.com> To: Rob Herring <robh@kernel.org> Cc: linus.walleij@linaro.org, gnurou@gmail.com, mark.rutland@arm.com, devicetree@vger.kernel.org, ralf@linux-mips.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-mips@linux-mips.org Subject: Re: [PATCH 2/2] MIPS: NI 169445 board support Date: Fri, 24 Mar 2017 09:46:40 -0500 [thread overview] Message-ID: <20170324144640.GA2483@nathan3500-linux-VM> (raw) Message-ID: <20170324144640.a_EF4b_piqA0ComVAb6FrE4oh2-mFp-uCa0D9vQmv18@z> (raw) In-Reply-To: <20170323222945.bxz4qa6ydicrh4q6@rob-hp-laptop> On Thu, Mar 23, 2017 at 05:29:45PM -0500, Rob Herring wrote: > On Tue, Mar 14, 2017 at 11:13:23AM -0500, Nathan Sullivan wrote: > > Support the National Instruments 169445 board. > > > > Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> > > --- > > Documentation/devicetree/bindings/mips/ni.txt | 7 ++ > > MAINTAINERS | 8 ++ > > arch/mips/boot/dts/Makefile | 1 + > > arch/mips/boot/dts/ni/169445.dts | 100 ++++++++++++++++++++++++ > > arch/mips/boot/dts/ni/Makefile | 7 ++ > > arch/mips/configs/generic/board-ni169445.config | 27 +++++++ > > arch/mips/generic/Kconfig | 6 ++ > > arch/mips/generic/vmlinux.its.S | 25 ++++++ > > 8 files changed, 181 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/mips/ni.txt > > create mode 100644 arch/mips/boot/dts/ni/169445.dts > > create mode 100644 arch/mips/boot/dts/ni/Makefile > > create mode 100644 arch/mips/configs/generic/board-ni169445.config > > > > diff --git a/Documentation/devicetree/bindings/mips/ni.txt b/Documentation/devicetree/bindings/mips/ni.txt > > new file mode 100644 > > index 0000000..722bf2d > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mips/ni.txt > > @@ -0,0 +1,7 @@ > > +National Instruments MIPS platforms > > + > > +required root node properties: > > + - compatible: must be "ni,169445" > > + > > +CPU Nodes > > + - compatible: must be "mti,mips14KEc" > > diff --git a/MAINTAINERS b/MAINTAINERS > > index c265a5f..b72f059 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -8887,6 +8887,14 @@ F: include/linux/sunrpc/ > > F: include/uapi/linux/nfs* > > F: include/uapi/linux/sunrpc/ > > > > +NI169445 MIPS ARCHITECTURE > > +M: Nathan Sullivan <nathan.sullivan@ni.com> > > +L: linux-mips@linux-mips.org > > +S: Maintained > > +F: arch/mips/boot/dts/ni/ > > +F: arch/mips/configs/generic/board-ni169445.config > > +F: Documentation/devicetree/bindings/mips/ni.txt > > + > > NILFS2 FILESYSTEM > > M: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> > > L: linux-nilfs@vger.kernel.org > > diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile > > index b9db492..27b0f37 100644 > > --- a/arch/mips/boot/dts/Makefile > > +++ b/arch/mips/boot/dts/Makefile > > @@ -4,6 +4,7 @@ dts-dirs += img > > dts-dirs += ingenic > > dts-dirs += lantiq > > dts-dirs += mti > > +dts-dirs += ni > > dts-dirs += netlogic > > dts-dirs += pic32 > > dts-dirs += qca > > diff --git a/arch/mips/boot/dts/ni/169445.dts b/arch/mips/boot/dts/ni/169445.dts > > new file mode 100644 > > index 0000000..9746576 > > --- /dev/null > > +++ b/arch/mips/boot/dts/ni/169445.dts > > @@ -0,0 +1,100 @@ > > +/dts-v1/; > > + > > +/ { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + compatible = "ni,169445"; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + cpu@0 { > > + device_type = "cpu"; > > + compatible = "mti,mips14KEc"; > > + clocks = <&baseclk>; > > + reg = <0>; > > + }; > > + }; > > + > > + memory@0 { > > + device_type = "memory"; > > + reg = <0x0 0x10000000>; > > + }; > > + > > + baseclk: baseclock { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <50000000>; > > + }; > > + > > + cpu_intc: cpu_intc { > > interrupt-controller { > > > + #address-cells = <0>; > > + compatible = "mti,cpu-interrupt-controller"; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + }; > > + > > + ahb@0 { > > ahb@1f300000 > > > + compatible = "simple-bus"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges = <0x0 0x1f300000 0x80FFF>; > > + > > + gpio1:gpio-controller@1f300010 { > ^ space > > 'gpio' is the standard node name, so > > gpio@... > > > + compatible = "ni,169445-nand-gpio"; > > + reg = <0x10 0x4>; > > + reg-names = "dat"; > > + gpio-controller; > > + #gpio-cells = <2>; > > + }; > > + > > + gpio2:gpio-controller@1f300014 { > > ditto > > > + compatible = "ni,169445-nand-gpio"; > > + reg = <0x14 0x4>; > > + reg-names = "dat"; > > + gpio-controller; > > + #gpio-cells = <2>; > > + no-output; > > + }; > > + > > + nand@1f300000 { > > + compatible = "gpio-control-nand"; > > + nand-on-flash-bbt; > > + nand-ecc-mode = "soft_bch"; > > + nand-ecc-step-size = <512>; > > + nand-ecc-strength = <4>; > > + reg = <0x0 4>; > > + gpios = <&gpio2 0 0>, /* rdy */ > > + <&gpio1 1 0>, /* nce */ > > + <&gpio1 2 0>, /* ale */ > > + <&gpio1 3 0>, /* cle */ > > + <&gpio1 4 0>; /* nwp */ > > + }; > > + > > + serial@1f380000 { > > + compatible = "ns16550a"; > > + reg = <0x80000 0x1000>; > > + interrupt-parent = <&cpu_intc>; > > + interrupts = <6>; > > + clocks = <&baseclk>; > > + reg-shift = <0>; > > + }; > > + > > + ethernet@1f340000 { > > + compatible = "snps,dwmac-4.10a"; > > + interrupt-parent = <&cpu_intc>; > > + interrupts = <5>; > > + interrupt-names = "macirq"; > > + reg = <0x40000 0x2000>; > > + clock-names = "stmmaceth", "pclk"; > > + clocks = <&baseclk>, <&baseclk>; > > + > > + phy-mode = "rgmii"; > > + > > + fixed-link { > > + speed = <1000>; > > + full-duplex; > > + }; > > + }; > > + }; > > +}; > > diff --git a/arch/mips/boot/dts/ni/Makefile b/arch/mips/boot/dts/ni/Makefile > > new file mode 100644 > > index 0000000..66cfdff > > --- /dev/null > > +++ b/arch/mips/boot/dts/ni/Makefile > > @@ -0,0 +1,7 @@ > > +dtb-$(CONFIG_FIT_IMAGE_FDT_NI169445) += 169445.dtb > > + > > +# Force kbuild to make empty built-in.o if necessary > > +obj- += dummy.o > > + > > +always := $(dtb-y) > > +clean-files := *.dtb *.dtb.S > > diff --git a/arch/mips/configs/generic/board-ni169445.config b/arch/mips/configs/generic/board-ni169445.config > > new file mode 100644 > > index 0000000..0bae1f8 > > --- /dev/null > > +++ b/arch/mips/configs/generic/board-ni169445.config > > @@ -0,0 +1,27 @@ > > +CONFIG_FIT_IMAGE_FDT_NI169445=y > > + > > +CONFIG_SERIAL_8250=y > > +CONFIG_SERIAL_8250_CONSOLE=y > > +CONFIG_SERIAL_OF_PLATFORM=y > > + > > +CONFIG_GPIOLIB=y > > +CONFIG_GPIO_SYSFS=y > > +CONFIG_GPIO_GENERIC_PLATFORM=y > > + > > +CONFIG_MTD=y > > +CONFIG_MTD_BLOCK=y > > +CONFIG_MTD_CMDLINE_PARTS=y > > + > > +CONFIG_MTD_NAND_ECC=y > > +CONFIG_MTD_NAND_ECC_BCH=y > > +CONFIG_MTD_NAND=y > > +CONFIG_MTD_NAND_GPIO=y > > +CONFIG_MTD_NAND_IDS=y > > + > > +CONFIG_MTD_UBI=y > > +CONFIG_MTD_UBI_BLOCK=y > > + > > +CONFIG_NETDEVICES=y > > +CONFIG_STMMAC_ETH=y > > +CONFIG_STMMAC_PLATFORM=y > > +CONFIG_DWMAC_GENERIC=y > > diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig > > index a606b3f..fbf0813 100644 > > --- a/arch/mips/generic/Kconfig > > +++ b/arch/mips/generic/Kconfig > > @@ -16,4 +16,10 @@ config LEGACY_BOARD_SEAD3 > > Enable this to include support for booting on MIPS SEAD-3 FPGA-based > > development boards, which boot using a legacy boot protocol. > > > > +config FIT_IMAGE_FDT_NI169445 > > + bool "Include FDT for NI 169445" > > + help > > + Enable this to include the FDT for the 169445 platform from > > + National Instruments in the FIT kernel image. > > + > > endif > > diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S > > index f67fbf1..de851f7 100644 > > --- a/arch/mips/generic/vmlinux.its.S > > +++ b/arch/mips/generic/vmlinux.its.S > > @@ -29,3 +29,28 @@ > > }; > > }; > > }; > > + > > +#ifdef CONFIG_FIT_IMAGE_FDT_NI169445 > > +/ { > > IMO, this shouldn't be in the kernel. Is the kernel supposed to > create board specific images for every bootloaders custom format? It > doesn't scale. > This is how the linux MIPS tree is doing generic kernels. Ralf, care to elaborate? The format is the same for each board, just with different trees and configurations. It's a little odd with just one board right now, the linux-mti tree has a bigger set. > > + images { > > + fdt@ni169445 { > > + description = "NI 169445 device tree"; > > + data = /incbin/("boot/dts/ni/169445.dtb"); > > + type = "flat_dt"; > > + arch = "mips"; > > + compression = "none"; > > + hash@0 { > > + algo = "sha1"; > > + }; > > + }; > > + }; > > + > > + configurations { > > + conf@ni169445 { > > + description = "NI 169445 Linux Kernel"; > > + kernel = "kernel@0"; > > + fdt = "fdt@ni169445"; > > + }; > > + }; > > +}; > > +#endif > > -- > > 2.1.4 > >
next prev parent reply other threads:[~2017-03-24 14:46 UTC|newest] Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-03-14 16:13 [PATCH v4] NI 169445 board support Nathan Sullivan 2017-03-14 16:13 ` Nathan Sullivan 2017-03-14 16:13 ` [PATCH 1/2] gpio: mmio: add support for NI 169445 NAND GPIO Nathan Sullivan 2017-03-14 16:13 ` Nathan Sullivan 2017-03-23 8:49 ` Linus Walleij 2017-03-14 16:13 ` [PATCH 2/2] MIPS: NI 169445 board support Nathan Sullivan 2017-03-14 16:13 ` Nathan Sullivan 2017-03-23 22:29 ` Rob Herring 2017-03-24 14:46 ` Nathan Sullivan [this message] 2017-03-24 14:46 ` Nathan Sullivan -- strict thread matches above, loose matches on Subject: below -- 2017-03-08 19:35 [PATCH v3] " Nathan Sullivan 2017-03-08 19:35 ` [PATCH 2/2] MIPS: " Nathan Sullivan 2017-03-08 19:35 ` Nathan Sullivan 2017-03-06 20:05 [PATCH v2] " Nathan Sullivan 2017-03-06 20:06 ` [PATCH 2/2] " Nathan Sullivan 2017-03-06 20:06 ` Nathan Sullivan 2017-03-06 23:04 ` James Hogan 2017-03-06 23:04 ` James Hogan 2017-03-06 23:14 ` Nathan Sullivan 2017-03-06 23:14 ` Nathan Sullivan 2017-03-15 9:37 ` Linus Walleij
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170324144640.GA2483@nathan3500-linux-VM \ --to=nathan.sullivan@ni.com \ --cc=devicetree@vger.kernel.org \ --cc=gnurou@gmail.com \ --cc=linus.walleij@linaro.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mips@linux-mips.org \ --cc=mark.rutland@arm.com \ --cc=ralf@linux-mips.org \ --cc=robh@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).