From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
To: linux-mips@linux-mips.org, ralf@linux-mips.org
Cc: Zubair.Kakakhel@imgtec.com, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] MIPS: generic: Add support for MIPSfpga
Date: Fri, 31 Mar 2017 10:00:41 +0100 [thread overview]
Message-ID: <20170331090042.29168-2-Zubair.Kakakhel@imgtec.com> (raw)
Message-ID: <20170331090041.MGrWChVZQcfz8pYgzYfCFCk43gDf0c4JsiRrFCwsZ2Q@z> (raw)
In-Reply-To: <20170331090042.29168-1-Zubair.Kakakhel@imgtec.com>
Add support for the MIPSfpga platform to generic kernel.
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
---
arch/mips/boot/dts/xilfpga/Makefile | 2 +-
arch/mips/boot/dts/xilfpga/nexys4ddr.dts | 8 ++++++++
arch/mips/configs/generic/board-xilfpga.config | 19 +++++++++++++++++++
arch/mips/generic/Kconfig | 6 ++++++
arch/mips/generic/vmlinux.its.S | 25 +++++++++++++++++++++++++
5 files changed, 59 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/configs/generic/board-xilfpga.config
diff --git a/arch/mips/boot/dts/xilfpga/Makefile b/arch/mips/boot/dts/xilfpga/Makefile
index 913a752..bbf8fb6 100644
--- a/arch/mips/boot/dts/xilfpga/Makefile
+++ b/arch/mips/boot/dts/xilfpga/Makefile
@@ -1,4 +1,4 @@
-dtb-$(CONFIG_XILFPGA_NEXYS4DDR) += nexys4ddr.dtb
+dtb-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += nexys4ddr.dtb
obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
index 09a62f2..8050e84 100644
--- a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
+++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
@@ -4,6 +4,14 @@
/ {
compatible = "digilent,nexys4ddr";
+
+ aliases {
+ serial0 = &axi_uart16550;
+ };
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
+ };
memory {
device_type = "memory";
diff --git a/arch/mips/configs/generic/board-xilfpga.config b/arch/mips/configs/generic/board-xilfpga.config
new file mode 100644
index 0000000..786d387
--- /dev/null
+++ b/arch/mips/configs/generic/board-xilfpga.config
@@ -0,0 +1,19 @@
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_XILINX=y
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_FIT_IMAGE_FDT_XILFPGA=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_XILINX=y
+CONFIG_SENSORS_ADT7410=y
+CONFIG_TMPFS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETDEVICES=y
+CONFIG_XILINX_EMACLITE=y
+CONFIG_SMSC_PHY=y
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
index a606b3f..26201e2 100644
--- a/arch/mips/generic/Kconfig
+++ b/arch/mips/generic/Kconfig
@@ -16,4 +16,10 @@ config LEGACY_BOARD_SEAD3
Enable this to include support for booting on MIPS SEAD-3 FPGA-based
development boards, which boot using a legacy boot protocol.
+config FIT_IMAGE_FDT_XILFPGA
+ bool "Include FDT for Xilfpga"
+ help
+ Enable this to include the FDT for the MIPSfpga platform
+ from Imagination Technologies in the FIT kernel image.
+
endif
diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S
index f67fbf1..b2daa7e 100644
--- a/arch/mips/generic/vmlinux.its.S
+++ b/arch/mips/generic/vmlinux.its.S
@@ -29,3 +29,28 @@
};
};
};
+
+#ifdef CONFIG_FIT_IMAGE_FDT_XILFPGA
+/ {
+ images {
+ fdt@xilfpga {
+ description = "MIPSfpga (xilfpga) Device Tree";
+ data = /incbin/("boot/dts/xilfpga/nexys4ddr.dtb");
+ type = "flat_dt";
+ arch = "mips";
+ compression = "none";
+ hash@0 {
+ algo = "sha1";
+ };
+ };
+ };
+
+ configurations {
+ conf@xilfpga {
+ description = "MIPSfpga Linux kernel";
+ kernel = "kernel@0";
+ fdt = "fdt@xilfpga";
+ };
+ };
+};
+#endif /* CONFIG_FIT_IMAGE_FDT_XILFPGA */
--
2.10.2
next prev parent reply other threads:[~2017-03-31 9:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-31 9:00 [PATCH 0/2] MIPS: Xilfpga: Switch to generic kernel Zubair Lutfullah Kakakhel
2017-03-31 9:00 ` Zubair Lutfullah Kakakhel
2017-03-31 9:00 ` Zubair Lutfullah Kakakhel [this message]
2017-03-31 9:00 ` [PATCH 1/2] MIPS: generic: Add support for MIPSfpga Zubair Lutfullah Kakakhel
2017-03-31 9:00 ` [PATCH 2/2] MIPS: Xilfpga: Switch to using generic defconfigs Zubair Lutfullah Kakakhel
2017-03-31 9:00 ` Zubair Lutfullah Kakakhel
2017-11-09 13:00 ` [PATCH 0/2] MIPS: Xilfpga: Switch to generic kernel James Hogan
2017-11-09 13:00 ` James Hogan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170331090042.29168-2-Zubair.Kakakhel@imgtec.com \
--to=zubair.kakakhel@imgtec.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).