From: "René van Dorst" <opensource@vdorst.com>
To: Frank Wunderlich <frank-w@public-files.de>
Cc: John Crispin <john@phrozen.org>,
Sean Wang <sean.wang@mediatek.com>,
Nelson Chang <nelson.chang@mediatek.com>,
"David S . Miller" <davem@davemloft.net>,
Matthias Brugger <matthias.bgg@gmail.com>,
netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-mips@vger.kernel.org,
Russell King <linux@armlinux.org.uk>, Stefan Roese <sr@denx.de>
Subject: Re: Aw: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK
Date: Sat, 24 Aug 2019 07:41:03 +0000 [thread overview]
Message-ID: <20190824074103.Horde.ytG2fquC9xJKq5TL79l6J0M@www.vdorst.com> (raw)
In-Reply-To: <trinity-df75d11a-c27f-4941-a880-b017ebabd3dc-1566583013438@3c-app-gmx-bs75>
Hi Frank,
Quoting Frank Wunderlich <frank-w@public-files.de>:
> tested on bpi-r2 (mt7623/mt7530) and bpi-r64 (mt7622/rtl8367)
>
Thanks for testing!
> as reported to rene directly rx-path needs some rework because
> current rx-speed
> on bpi-r2 is 865 Mbits/sec instead of ~940 Mbits/sec
I still think it is a result of the extra code in the rx path when mt76x8
was introduced.
Greats,
René
>
> Tested-by: Frank Wunderlich <frank-w@public-files.de>
>
> regards Frank
>
>
>> Gesendet: Freitag, 23. August 2019 um 15:45 Uhr
>> Von: "René van Dorst" <opensource@vdorst.com>
>> An: "John Crispin" <john@phrozen.org>, "Sean Wang"
>> <sean.wang@mediatek.com>, "Nelson Chang"
>> <nelson.chang@mediatek.com>, "David S . Miller"
>> <davem@davemloft.net>, "Matthias Brugger" <matthias.bgg@gmail.com>
>> Cc: netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
>> linux-mediatek@lists.infradead.org, linux-mips@vger.kernel.org,
>> "Russell King" <linux@armlinux.org.uk>, "Frank Wunderlich"
>> <frank-w@public-files.de>, "Stefan Roese" <sr@denx.de>, "René van
>> Dorst" <opensource@vdorst.com>
>> Betreff: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK
>>
>> These patches converts mediatek driver to PHYLINK API.
>>
>> v2->v3:
>> * Phylink improvements and clean-ups after review
>> v1->v2:
>> * Rebase for mt76x8 changes
>> * Phylink improvements and clean-ups after review
>> * SGMII port doesn't support 2.5Gbit in SGMII mode only in BASE-X mode.
>> Refactor the code.
>>
>> René van Dorst (3):
>> net: ethernet: mediatek: Add basic PHYLINK support
>> net: ethernet: mediatek: Re-add support SGMII
>> dt-bindings: net: ethernet: Update mt7622 docs and dts to reflect the
>> new phylink API
>>
>> .../arm/mediatek/mediatek,sgmiisys.txt | 2 -
>> .../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 28 +-
>> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 1 -
>> drivers/net/ethernet/mediatek/Kconfig | 2 +-
>> drivers/net/ethernet/mediatek/mtk_eth_path.c | 75 +--
>> drivers/net/ethernet/mediatek/mtk_eth_soc.c | 529 ++++++++++++------
>> drivers/net/ethernet/mediatek/mtk_eth_soc.h | 68 ++-
>> drivers/net/ethernet/mediatek/mtk_sgmii.c | 65 ++-
>> 8 files changed, 477 insertions(+), 293 deletions(-)
>>
>> --
>> 2.20.1
>>
>>
prev parent reply other threads:[~2019-08-24 7:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-23 13:45 [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK René van Dorst
2019-08-23 13:45 ` [PATCH net-next v3 1/3] net: ethernet: mediatek: Add basic PHYLINK support René van Dorst
2019-08-24 9:11 ` Russell King - ARM Linux admin
2019-08-24 12:33 ` René van Dorst
2019-08-23 13:45 ` [PATCH net-next v3 2/3] net: ethernet: mediatek: Re-add support SGMII René van Dorst
2019-08-24 9:21 ` Russell King - ARM Linux admin
2019-08-24 13:11 ` René van Dorst
2019-08-24 13:32 ` Russell King - ARM Linux admin
2019-08-25 11:41 ` René van Dorst
2019-08-23 13:45 ` [PATCH net-next v3 3/3] dt-bindings: net: ethernet: Update mt7622 docs and dts to reflect the new phylink API René van Dorst
2019-08-23 17:56 ` Aw: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK Frank Wunderlich
2019-08-24 7:41 ` René van Dorst [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190824074103.Horde.ytG2fquC9xJKq5TL79l6J0M@www.vdorst.com \
--to=opensource@vdorst.com \
--cc=davem@davemloft.net \
--cc=frank-w@public-files.de \
--cc=john@phrozen.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=matthias.bgg@gmail.com \
--cc=nelson.chang@mediatek.com \
--cc=netdev@vger.kernel.org \
--cc=sean.wang@mediatek.com \
--cc=sr@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).