From: "Frank Wunderlich" <frank-w@public-files.de>
To: "\"René van Dorst\"" <opensource@vdorst.com>
Cc: "John Crispin" <john@phrozen.org>,
"Sean Wang" <sean.wang@mediatek.com>,
"Nelson Chang" <nelson.chang@mediatek.com>,
"David S . Miller" <davem@davemloft.net>,
"Matthias Brugger" <matthias.bgg@gmail.com>,
netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-mips@vger.kernel.org,
"Russell King" <linux@armlinux.org.uk>,
"Stefan Roese" <sr@denx.de>,
"\"René van Dorst\"" <opensource@vdorst.com>
Subject: Aw: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK
Date: Fri, 23 Aug 2019 19:56:53 +0200 [thread overview]
Message-ID: <trinity-df75d11a-c27f-4941-a880-b017ebabd3dc-1566583013438@3c-app-gmx-bs75> (raw)
In-Reply-To: <20190823134516.27559-1-opensource@vdorst.com>
tested on bpi-r2 (mt7623/mt7530) and bpi-r64 (mt7622/rtl8367)
as reported to rene directly rx-path needs some rework because current rx-speed
on bpi-r2 is 865 Mbits/sec instead of ~940 Mbits/sec
Tested-by: Frank Wunderlich <frank-w@public-files.de>
regards Frank
> Gesendet: Freitag, 23. August 2019 um 15:45 Uhr
> Von: "René van Dorst" <opensource@vdorst.com>
> An: "John Crispin" <john@phrozen.org>, "Sean Wang" <sean.wang@mediatek.com>, "Nelson Chang" <nelson.chang@mediatek.com>, "David S . Miller" <davem@davemloft.net>, "Matthias Brugger" <matthias.bgg@gmail.com>
> Cc: netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-mips@vger.kernel.org, "Russell King" <linux@armlinux.org.uk>, "Frank Wunderlich" <frank-w@public-files.de>, "Stefan Roese" <sr@denx.de>, "René van Dorst" <opensource@vdorst.com>
> Betreff: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK
>
> These patches converts mediatek driver to PHYLINK API.
>
> v2->v3:
> * Phylink improvements and clean-ups after review
> v1->v2:
> * Rebase for mt76x8 changes
> * Phylink improvements and clean-ups after review
> * SGMII port doesn't support 2.5Gbit in SGMII mode only in BASE-X mode.
> Refactor the code.
>
> René van Dorst (3):
> net: ethernet: mediatek: Add basic PHYLINK support
> net: ethernet: mediatek: Re-add support SGMII
> dt-bindings: net: ethernet: Update mt7622 docs and dts to reflect the
> new phylink API
>
> .../arm/mediatek/mediatek,sgmiisys.txt | 2 -
> .../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 28 +-
> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 1 -
> drivers/net/ethernet/mediatek/Kconfig | 2 +-
> drivers/net/ethernet/mediatek/mtk_eth_path.c | 75 +--
> drivers/net/ethernet/mediatek/mtk_eth_soc.c | 529 ++++++++++++------
> drivers/net/ethernet/mediatek/mtk_eth_soc.h | 68 ++-
> drivers/net/ethernet/mediatek/mtk_sgmii.c | 65 ++-
> 8 files changed, 477 insertions(+), 293 deletions(-)
>
> --
> 2.20.1
>
>
next prev parent reply other threads:[~2019-08-23 17:57 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-23 13:45 [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK René van Dorst
2019-08-23 13:45 ` [PATCH net-next v3 1/3] net: ethernet: mediatek: Add basic PHYLINK support René van Dorst
2019-08-24 9:11 ` Russell King - ARM Linux admin
2019-08-24 12:33 ` René van Dorst
2019-08-23 13:45 ` [PATCH net-next v3 2/3] net: ethernet: mediatek: Re-add support SGMII René van Dorst
2019-08-24 9:21 ` Russell King - ARM Linux admin
2019-08-24 13:11 ` René van Dorst
2019-08-24 13:32 ` Russell King - ARM Linux admin
2019-08-25 11:41 ` René van Dorst
2019-08-23 13:45 ` [PATCH net-next v3 3/3] dt-bindings: net: ethernet: Update mt7622 docs and dts to reflect the new phylink API René van Dorst
2019-08-23 17:56 ` Frank Wunderlich [this message]
2019-08-24 7:41 ` Aw: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK René van Dorst
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=trinity-df75d11a-c27f-4941-a880-b017ebabd3dc-1566583013438@3c-app-gmx-bs75 \
--to=frank-w@public-files.de \
--cc=davem@davemloft.net \
--cc=john@phrozen.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=matthias.bgg@gmail.com \
--cc=nelson.chang@mediatek.com \
--cc=netdev@vger.kernel.org \
--cc=opensource@vdorst.com \
--cc=sean.wang@mediatek.com \
--cc=sr@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).