[PATCH AUTOSEL 5.3 01/49] MIPS: Ingenic: Disable broken BTB lookup optimization.

[PATCH AUTOSEL 5.3 01/49] MIPS: Ingenic: Disable broken BTB lookup optimization.

[Sasha Levin]

From: Zhou Yanjie <zhouyanjie@zoho.com>

[ Upstream commit 053951dda71ecb4b554a2cdbe26f5f6f9bee9dd2 ]

In order to further reduce power consumption, the XBurst core
by default attempts to avoid branch target buffer lookups by
detecting & special casing loops. This feature will cause
BogoMIPS and lpj calculate in error. Set cp0 config7 bit 4 to
disable this feature.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: ralf@linux-mips.org
Cc: paul@crapouillou.net
Cc: jhogan@kernel.org
Cc: malat@debian.org
Cc: gregkh@linuxfoundation.org
Cc: tglx@linutronix.de
Cc: allison@lohutok.net
Cc: syq@debian.org
Cc: chenhc@lemote.com
Cc: jiaxun.yang@flygoat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/mipsregs.h | 4 ++++
 arch/mips/kernel/cpu-probe.c     | 7 +++++++
 2 files changed, 11 insertions(+)

diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 1e6966e8527e9..bdbdc19a2b8f8 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -689,6 +689,9 @@
 #define MIPS_CONF7_IAR		(_ULCAST_(1) << 10)
 #define MIPS_CONF7_AR		(_ULCAST_(1) << 16)
 
+/* Ingenic Config7 bits */
+#define MIPS_CONF7_BTB_LOOP_EN	(_ULCAST_(1) << 4)
+
 /* Config7 Bits specific to MIPS Technologies. */
 
 /* Performance counters implemented Per TC */
@@ -2813,6 +2816,7 @@ __BUILD_SET_C0(status)
 __BUILD_SET_C0(cause)
 __BUILD_SET_C0(config)
 __BUILD_SET_C0(config5)
+__BUILD_SET_C0(config7)
 __BUILD_SET_C0(intcontrol)
 __BUILD_SET_C0(intctl)
 __BUILD_SET_C0(srsmap)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 9635c1db3ae6a..e654ffc1c8a0d 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1964,6 +1964,13 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
 		c->cputype = CPU_JZRISC;
 		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
 		__cpu_name[cpu] = "Ingenic JZRISC";
+		/*
+		 * The XBurst core by default attempts to avoid branch target
+		 * buffer lookups by detecting & special casing loops. This
+		 * feature will cause BogoMIPS and lpj calculate in error.
+		 * Set cp0 config7 bit 4 to disable this feature.
+		 */
+		set_c0_config7(MIPS_CONF7_BTB_LOOP_EN);
 		break;
 	default:
 		panic("Unknown Ingenic Processor ID!");
-- 
2.20.1

[PATCH AUTOSEL 5.3 02/49] clk: jz4740: Add TCU clock

[Sasha Levin]

From: Paul Cercueil <paul@crapouillou.net>

[ Upstream commit 73dd11dc1a883d4c994d729dc9984f4890001157 ]

Add the missing TCU clock to the list of clocks supplied by the CGU for
the JZ4740 SoC.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: od@zcrc.me
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/ingenic/jz4740-cgu.c       | 6 ++++++
 include/dt-bindings/clock/jz4740-cgu.h | 1 +
 2 files changed, 7 insertions(+)

diff --git a/drivers/clk/ingenic/jz4740-cgu.c b/drivers/clk/ingenic/jz4740-cgu.c
index 4c0a20949c2c2..67f8a0e142845 100644
--- a/drivers/clk/ingenic/jz4740-cgu.c
+++ b/drivers/clk/ingenic/jz4740-cgu.c
@@ -222,6 +222,12 @@ static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
 		.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
 		.gate = { CGU_REG_CLKGR, 5 },
 	},
+
+	[JZ4740_CLK_TCU] = {
+		"tcu", CGU_CLK_GATE,
+		.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 1 },
+	},
 };
 
 static void __init jz4740_cgu_init(struct device_node *np)
diff --git a/include/dt-bindings/clock/jz4740-cgu.h b/include/dt-bindings/clock/jz4740-cgu.h
index 6ed83f926ae71..e82d77028581a 100644
--- a/include/dt-bindings/clock/jz4740-cgu.h
+++ b/include/dt-bindings/clock/jz4740-cgu.h
@@ -34,5 +34,6 @@
 #define JZ4740_CLK_ADC		19
 #define JZ4740_CLK_I2C		20
 #define JZ4740_CLK_AIC		21
+#define JZ4740_CLK_TCU		22
 
 #endif /* __DT_BINDINGS_CLOCK_JZ4740_CGU_H__ */
-- 
2.20.1

[PATCH AUTOSEL 5.3 03/49] MIPS: Don't use bc_false uninitialized in __mm_isBranchInstr

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit c2869aafe7191d366d74c55cb8a93c6d0baba317 ]

clang warns:

arch/mips/kernel/branch.c:148:8: error: variable 'bc_false' is used
uninitialized whenever switch case is taken
[-Werror,-Wsometimes-uninitialized]
                case mm_bc2t_op:
                     ^~~~~~~~~~
arch/mips/kernel/branch.c:157:8: note: uninitialized use occurs here
                        if (bc_false)
                            ^~~~~~~~
arch/mips/kernel/branch.c:149:8: error: variable 'bc_false' is used
uninitialized whenever switch case is taken
[-Werror,-Wsometimes-uninitialized]
                case mm_bc1t_op:
                     ^~~~~~~~~~
arch/mips/kernel/branch.c:157:8: note: uninitialized use occurs here
                        if (bc_false)
                            ^~~~~~~~
arch/mips/kernel/branch.c:142:4: note: variable 'bc_false' is declared
here
                        int bc_false = 0;
                        ^
2 errors generated.

When mm_bc1t_op and mm_bc2t_op are taken, the bc_false initialization
does not happen, which leads to a garbage value upon use, as illustrated
below with a small sample program.

$ mipsel-linux-gnu-gcc --version | head -n1
mipsel-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0

$ clang --version | head -n1
ClangBuiltLinux clang version 9.0.0 (git://github.com/llvm/llvm-project
544315b4197034a3be8acd12cba56a75fb1f08dc) (based on LLVM 9.0.0svn)

$ cat test.c
 #include <stdio.h>

 static void switch_scoped(int opcode)
 {
	 switch (opcode) {
	 case 1:
	 case 2: {
		 int bc_false = 0;

		 bc_false = 4;
	 case 3:
	 case 4:
		 printf("\t* switch scoped bc_false = %d\n", bc_false);
	 }
	 }
 }

 static void function_scoped(int opcode)
 {
	 int bc_false = 0;

	 switch (opcode) {
	 case 1:
	 case 2: {
		 bc_false = 4;
	 case 3:
	 case 4:
		 printf("\t* function scoped bc_false = %d\n", bc_false);
	 }
	 }
 }

 int main(void)
 {
	 int opcode;

	 for (opcode = 1; opcode < 5; opcode++) {
		 printf("opcode = %d:\n", opcode);
		 switch_scoped(opcode);
		 function_scoped(opcode);
		 printf("\n");
	 }

	 return 0;
 }

$ mipsel-linux-gnu-gcc -std=gnu89 -static test.c && \
  qemu-mipsel a.out
opcode = 1:
        * switch scoped bc_false = 4
        * function scoped bc_false = 4

opcode = 2:
        * switch scoped bc_false = 4
        * function scoped bc_false = 4

opcode = 3:
        * switch scoped bc_false = 2147483004
        * function scoped bc_false = 0

opcode = 4:
        * switch scoped bc_false = 2147483004
        * function scoped bc_false = 0

$ clang -std=gnu89 --target=mipsel-linux-gnu -m32 -static test.c && \
  qemu-mipsel a.out
opcode = 1:
        * switch scoped bc_false = 4
        * function scoped bc_false = 4

opcode = 2:
        * switch scoped bc_false = 4
        * function scoped bc_false = 4

opcode = 3:
        * switch scoped bc_false = 2147483004
        * function scoped bc_false = 0

opcode = 4:
        * switch scoped bc_false = 2147483004
        * function scoped bc_false = 0

Move the definition up so that we get the right behavior and mark it
__maybe_unused as it will not be used when CONFIG_MIPS_FP_SUPPORT
isn't enabled.

Fixes: 6a1cc218b9cc ("MIPS: branch: Remove FP branch handling when CONFIG_MIPS_FP_SUPPORT=n")
Link: https://github.com/ClangBuiltLinux/linux/issues/603
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/branch.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index 1db29957a9318..2c38f75d87ffb 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -58,6 +58,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 		       unsigned long *contpc)
 {
 	union mips_instruction insn = (union mips_instruction)dec_insn.insn;
+	int __maybe_unused bc_false = 0;
 
 	if (!cpu_has_mmips)
 		return 0;
@@ -139,7 +140,6 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 #ifdef CONFIG_MIPS_FP_SUPPORT
 		case mm_bc2f_op:
 		case mm_bc1f_op: {
-			int bc_false = 0;
 			unsigned int fcr31;
 			unsigned int bit;
 
-- 
2.20.1

[PATCH AUTOSEL 5.3 04/49] MIPS: tlbex: Explicitly cast _PAGE_NO_EXEC to a boolean

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit c59ae0a1055127dd3828a88e111a0db59b254104 ]

clang warns:

arch/mips/mm/tlbex.c:634:19: error: use of logical '&&' with constant
operand [-Werror,-Wconstant-logical-operand]
        if (cpu_has_rixi && _PAGE_NO_EXEC) {
                         ^  ~~~~~~~~~~~~~
arch/mips/mm/tlbex.c:634:19: note: use '&' for a bitwise operation
        if (cpu_has_rixi && _PAGE_NO_EXEC) {
                         ^~
                         &
arch/mips/mm/tlbex.c:634:19: note: remove constant to silence this
warning
        if (cpu_has_rixi && _PAGE_NO_EXEC) {
                        ~^~~~~~~~~~~~~~~~
1 error generated.

Explicitly cast this value to a boolean so that clang understands we
intend for this to be a non-zero value.

Fixes: 00bf1c691d08 ("MIPS: tlbex: Avoid placing software PTE bits in Entry* PFN fields")
Link: https://github.com/ClangBuiltLinux/linux/issues/609
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/mm/tlbex.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 144ceb0fba88f..bece1264d1c5a 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -631,7 +631,7 @@ static __maybe_unused void build_convert_pte_to_entrylo(u32 **p,
 		return;
 	}
 
-	if (cpu_has_rixi && _PAGE_NO_EXEC) {
+	if (cpu_has_rixi && !!_PAGE_NO_EXEC) {
 		if (fill_includes_sw_bits) {
 			UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL));
 		} else {
-- 
2.20.1

[PATCH AUTOSEL 5.3 10/49] mips/atomic: Fix loongson_llsc_mb() wreckage

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 1c6c1ca318585f1096d4d04bc722297c85e9fb8a ]

The comment describing the loongson_llsc_mb() reorder case doesn't
make any sense what so ever. Instruction re-ordering is not an SMP
artifact, but rather a CPU local phenomenon. Clarify the comment by
explaining that these issue cause a coherence fail.

For the branch speculation case; if futex_atomic_cmpxchg_inatomic()
needs one at the bne branch target, then surely the normal
__cmpxch_asm() implementation does too. We cannot rely on the
barriers from cmpxchg() because cmpxchg_local() is implemented with
the same macro, and branch prediction and speculation are, too, CPU
local.

Fixes: e02e07e3127d ("MIPS: Loongson: Introduce and use loongson_llsc_mb()")
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/atomic.h  |  5 +++--
 arch/mips/include/asm/barrier.h | 32 ++++++++++++++++++--------------
 arch/mips/include/asm/bitops.h  |  5 +++++
 arch/mips/include/asm/cmpxchg.h |  5 +++++
 arch/mips/kernel/syscall.c      |  1 +
 5 files changed, 32 insertions(+), 16 deletions(-)

diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 9a82dd11c0e9e..190f1b6151221 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -193,6 +193,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 	if (kernel_uses_llsc) {
 		int temp;
 
+		loongson_llsc_mb();
 		__asm__ __volatile__(
 		"	.set	push					\n"
 		"	.set	"MIPS_ISA_LEVEL"			\n"
@@ -200,12 +201,12 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 		"	.set	pop					\n"
 		"	subu	%0, %1, %3				\n"
 		"	move	%1, %0					\n"
-		"	bltz	%0, 1f					\n"
+		"	bltz	%0, 2f					\n"
 		"	.set	push					\n"
 		"	.set	"MIPS_ISA_LEVEL"			\n"
 		"	sc	%1, %2					\n"
 		"\t" __scbeqz "	%1, 1b					\n"
-		"1:							\n"
+		"2:							\n"
 		"	.set	pop					\n"
 		: "=&r" (result), "=&r" (temp),
 		  "+" GCC_OFF_SMALL_ASM() (v->counter)
diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
index b865e317a14f7..f9a6da96aae12 100644
--- a/arch/mips/include/asm/barrier.h
+++ b/arch/mips/include/asm/barrier.h
@@ -238,36 +238,40 @@
 
 /*
  * Some Loongson 3 CPUs have a bug wherein execution of a memory access (load,
- * store or pref) in between an ll & sc can cause the sc instruction to
+ * store or prefetch) in between an LL & SC can cause the SC instruction to
  * erroneously succeed, breaking atomicity. Whilst it's unusual to write code
  * containing such sequences, this bug bites harder than we might otherwise
  * expect due to reordering & speculation:
  *
- * 1) A memory access appearing prior to the ll in program order may actually
- *    be executed after the ll - this is the reordering case.
+ * 1) A memory access appearing prior to the LL in program order may actually
+ *    be executed after the LL - this is the reordering case.
  *
- *    In order to avoid this we need to place a memory barrier (ie. a sync
- *    instruction) prior to every ll instruction, in between it & any earlier
- *    memory access instructions. Many of these cases are already covered by
- *    smp_mb__before_llsc() but for the remaining cases, typically ones in
- *    which multiple CPUs may operate on a memory location but ordering is not
- *    usually guaranteed, we use loongson_llsc_mb() below.
+ *    In order to avoid this we need to place a memory barrier (ie. a SYNC
+ *    instruction) prior to every LL instruction, in between it and any earlier
+ *    memory access instructions.
  *
  *    This reordering case is fixed by 3A R2 CPUs, ie. 3A2000 models and later.
  *
- * 2) If a conditional branch exists between an ll & sc with a target outside
- *    of the ll-sc loop, for example an exit upon value mismatch in cmpxchg()
+ * 2) If a conditional branch exists between an LL & SC with a target outside
+ *    of the LL-SC loop, for example an exit upon value mismatch in cmpxchg()
  *    or similar, then misprediction of the branch may allow speculative
- *    execution of memory accesses from outside of the ll-sc loop.
+ *    execution of memory accesses from outside of the LL-SC loop.
  *
- *    In order to avoid this we need a memory barrier (ie. a sync instruction)
+ *    In order to avoid this we need a memory barrier (ie. a SYNC instruction)
  *    at each affected branch target, for which we also use loongson_llsc_mb()
  *    defined below.
  *
  *    This case affects all current Loongson 3 CPUs.
+ *
+ * The above described cases cause an error in the cache coherence protocol;
+ * such that the Invalidate of a competing LL-SC goes 'missing' and SC
+ * erroneously observes its core still has Exclusive state and lets the SC
+ * proceed.
+ *
+ * Therefore the error only occurs on SMP systems.
  */
 #ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS /* Loongson-3's LLSC workaround */
-#define loongson_llsc_mb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+#define loongson_llsc_mb()	__asm__ __volatile__("sync" : : :"memory")
 #else
 #define loongson_llsc_mb()	do { } while (0)
 #endif
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index 9a466dde9b96a..7bd35e5e2a9e4 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -249,6 +249,7 @@ static inline int test_and_set_bit(unsigned long nr,
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	push				\n"
@@ -305,6 +306,7 @@ static inline int test_and_set_bit_lock(unsigned long nr,
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	push				\n"
@@ -364,6 +366,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	" __LL	"%0, %1 # test_and_clear_bit	\n"
@@ -379,6 +382,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	push				\n"
@@ -438,6 +442,7 @@ static inline int test_and_change_bit(unsigned long nr,
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	push				\n"
diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h
index f345a873742d9..f5994a332673b 100644
--- a/arch/mips/include/asm/cmpxchg.h
+++ b/arch/mips/include/asm/cmpxchg.h
@@ -46,6 +46,7 @@ extern unsigned long __xchg_called_with_bad_pointer(void)
 	__typeof(*(m)) __ret;						\
 									\
 	if (kernel_uses_llsc) {						\
+		loongson_llsc_mb();					\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
@@ -117,6 +118,7 @@ static inline unsigned long __xchg(volatile void *ptr, unsigned long x,
 	__typeof(*(m)) __ret;						\
 									\
 	if (kernel_uses_llsc) {						\
+		loongson_llsc_mb();					\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
@@ -134,6 +136,7 @@ static inline unsigned long __xchg(volatile void *ptr, unsigned long x,
 		: "=&r" (__ret), "=" GCC_OFF_SMALL_ASM() (*m)		\
 		: GCC_OFF_SMALL_ASM() (*m), "Jr" (old), "Jr" (new)		\
 		: "memory");						\
+		loongson_llsc_mb();					\
 	} else {							\
 		unsigned long __flags;					\
 									\
@@ -229,6 +232,7 @@ static inline unsigned long __cmpxchg64(volatile void *ptr,
 	 */
 	local_irq_save(flags);
 
+	loongson_llsc_mb();
 	asm volatile(
 	"	.set	push				\n"
 	"	.set	" MIPS_ISA_ARCH_LEVEL "		\n"
@@ -274,6 +278,7 @@ static inline unsigned long __cmpxchg64(volatile void *ptr,
 	  "r" (old),
 	  "r" (new)
 	: "memory");
+	loongson_llsc_mb();
 
 	local_irq_restore(flags);
 	return ret;
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index b6dc78ad5d8c0..b0e25e913bdb9 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -132,6 +132,7 @@ static inline int mips_atomic_set(unsigned long addr, unsigned long new)
 		  [efault] "i" (-EFAULT)
 		: "memory");
 	} else if (cpu_has_llsc) {
+		loongson_llsc_mb();
 		__asm__ __volatile__ (
 		"	.set	push					\n"
 		"	.set	"MIPS_ISA_ARCH_LEVEL"			\n"
-- 
2.20.1

[PATCH AUTOSEL 5.3 14/49] mips/atomic: Fix smp_mb__{before,after}_atomic()

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 42344113ba7a1ed7b5654cd5270af0d5698d8521 ]

Recent probing at the Linux Kernel Memory Model uncovered a
'surprise'. Strongly ordered architectures where the atomic RmW
primitive implies full memory ordering and
smp_mb__{before,after}_atomic() are a simple barrier() (such as MIPS
without WEAK_REORDERING_BEYOND_LLSC) fail for:

	*x = 1;
	atomic_inc(u);
	smp_mb__after_atomic();
	r0 = *y;

Because, while the atomic_inc() implies memory order, it
(surprisingly) does not provide a compiler barrier. This then allows
the compiler to re-order like so:

	atomic_inc(u);
	*x = 1;
	smp_mb__after_atomic();
	r0 = *y;

Which the CPU is then allowed to re-order (under TSO rules) like:

	atomic_inc(u);
	r0 = *y;
	*x = 1;

And this very much was not intended. Therefore strengthen the atomic
RmW ops to include a compiler barrier.

Reported-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/atomic.h  | 14 +++++------
 arch/mips/include/asm/barrier.h | 12 ++++++++--
 arch/mips/include/asm/bitops.h  | 42 ++++++++++++++++++++-------------
 arch/mips/include/asm/cmpxchg.h |  6 ++---
 4 files changed, 45 insertions(+), 29 deletions(-)

diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 190f1b6151221..bb8658cc7f126 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -68,7 +68,7 @@ static __inline__ void atomic_##op(int i, atomic_t * v)			      \
 		"\t" __scbeqz "	%0, 1b					\n"   \
 		"	.set	pop					\n"   \
 		: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (v->counter)	      \
-		: "Ir" (i));						      \
+		: "Ir" (i) : __LLSC_CLOBBER);				      \
 	} else {							      \
 		unsigned long flags;					      \
 									      \
@@ -98,7 +98,7 @@ static __inline__ int atomic_##op##_return_relaxed(int i, atomic_t * v)	      \
 		"	.set	pop					\n"   \
 		: "=&r" (result), "=&r" (temp),				      \
 		  "+" GCC_OFF_SMALL_ASM() (v->counter)			      \
-		: "Ir" (i));						      \
+		: "Ir" (i) : __LLSC_CLOBBER);				      \
 	} else {							      \
 		unsigned long flags;					      \
 									      \
@@ -132,7 +132,7 @@ static __inline__ int atomic_fetch_##op##_relaxed(int i, atomic_t * v)	      \
 		"	move	%0, %1					\n"   \
 		: "=&r" (result), "=&r" (temp),				      \
 		  "+" GCC_OFF_SMALL_ASM() (v->counter)			      \
-		: "Ir" (i));						      \
+		: "Ir" (i) : __LLSC_CLOBBER);				      \
 	} else {							      \
 		unsigned long flags;					      \
 									      \
@@ -210,7 +210,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 		"	.set	pop					\n"
 		: "=&r" (result), "=&r" (temp),
 		  "+" GCC_OFF_SMALL_ASM() (v->counter)
-		: "Ir" (i));
+		: "Ir" (i) : __LLSC_CLOBBER);
 	} else {
 		unsigned long flags;
 
@@ -270,7 +270,7 @@ static __inline__ void atomic64_##op(s64 i, atomic64_t * v)		      \
 		"\t" __scbeqz "	%0, 1b					\n"   \
 		"	.set	pop					\n"   \
 		: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (v->counter)	      \
-		: "Ir" (i));						      \
+		: "Ir" (i) : __LLSC_CLOBBER);				      \
 	} else {							      \
 		unsigned long flags;					      \
 									      \
@@ -300,7 +300,7 @@ static __inline__ s64 atomic64_##op##_return_relaxed(s64 i, atomic64_t * v)   \
 		"	.set	pop					\n"   \
 		: "=&r" (result), "=&r" (temp),				      \
 		  "+" GCC_OFF_SMALL_ASM() (v->counter)			      \
-		: "Ir" (i));						      \
+		: "Ir" (i) : __LLSC_CLOBBER);				      \
 	} else {							      \
 		unsigned long flags;					      \
 									      \
@@ -334,7 +334,7 @@ static __inline__ s64 atomic64_fetch_##op##_relaxed(s64 i, atomic64_t * v)    \
 		"	.set	pop					\n"   \
 		: "=&r" (result), "=&r" (temp),				      \
 		  "+" GCC_OFF_SMALL_ASM() (v->counter)			      \
-		: "Ir" (i));						      \
+		: "Ir" (i) : __LLSC_CLOBBER);				      \
 	} else {							      \
 		unsigned long flags;					      \
 									      \
diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
index f9a6da96aae12..9228f73862205 100644
--- a/arch/mips/include/asm/barrier.h
+++ b/arch/mips/include/asm/barrier.h
@@ -211,14 +211,22 @@
 #define __smp_wmb()	barrier()
 #endif
 
+/*
+ * When LL/SC does imply order, it must also be a compiler barrier to avoid the
+ * compiler from reordering where the CPU will not. When it does not imply
+ * order, the compiler is also free to reorder across the LL/SC loop and
+ * ordering will be done by smp_llsc_mb() and friends.
+ */
 #if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP)
 #define __WEAK_LLSC_MB		"	sync	\n"
+#define smp_llsc_mb()		__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+#define __LLSC_CLOBBER
 #else
 #define __WEAK_LLSC_MB		"		\n"
+#define smp_llsc_mb()		do { } while (0)
+#define __LLSC_CLOBBER		"memory"
 #endif
 
-#define smp_llsc_mb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
-
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 #define smp_mb__before_llsc() smp_wmb()
 #define __smp_mb__before_llsc() __smp_wmb()
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index 7bd35e5e2a9e4..985d6a02f9ea1 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -66,7 +66,8 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 		"	beqzl	%0, 1b					\n"
 		"	.set	pop					\n"
 		: "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*m)
-		: "ir" (1UL << bit), GCC_OFF_SMALL_ASM() (*m));
+		: "ir" (1UL << bit), GCC_OFF_SMALL_ASM() (*m)
+		: __LLSC_CLOBBER);
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
 		loongson_llsc_mb();
@@ -76,7 +77,8 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 			"	" __INS "%0, %3, %2, 1			\n"
 			"	" __SC "%0, %1				\n"
 			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m)
-			: "ir" (bit), "r" (~0));
+			: "ir" (bit), "r" (~0)
+			: __LLSC_CLOBBER);
 		} while (unlikely(!temp));
 #endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
 	} else if (kernel_uses_llsc) {
@@ -90,7 +92,8 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 			"	" __SC	"%0, %1				\n"
 			"	.set	pop				\n"
 			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m)
-			: "ir" (1UL << bit));
+			: "ir" (1UL << bit)
+			: __LLSC_CLOBBER);
 		} while (unlikely(!temp));
 	} else
 		__mips_set_bit(nr, addr);
@@ -122,7 +125,8 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 		"	beqzl	%0, 1b					\n"
 		"	.set	pop					\n"
 		: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m)
-		: "ir" (~(1UL << bit)));
+		: "ir" (~(1UL << bit))
+		: __LLSC_CLOBBER);
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
 		loongson_llsc_mb();
@@ -132,7 +136,8 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 			"	" __INS "%0, $0, %2, 1			\n"
 			"	" __SC "%0, %1				\n"
 			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m)
-			: "ir" (bit));
+			: "ir" (bit)
+			: __LLSC_CLOBBER);
 		} while (unlikely(!temp));
 #endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
 	} else if (kernel_uses_llsc) {
@@ -146,7 +151,8 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 			"	" __SC "%0, %1				\n"
 			"	.set	pop				\n"
 			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m)
-			: "ir" (~(1UL << bit)));
+			: "ir" (~(1UL << bit))
+			: __LLSC_CLOBBER);
 		} while (unlikely(!temp));
 	} else
 		__mips_clear_bit(nr, addr);
@@ -192,7 +198,8 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 		"	beqzl	%0, 1b				\n"
 		"	.set	pop				\n"
 		: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m)
-		: "ir" (1UL << bit));
+		: "ir" (1UL << bit)
+		: __LLSC_CLOBBER);
 	} else if (kernel_uses_llsc) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
@@ -207,7 +214,8 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 			"	" __SC	"%0, %1				\n"
 			"	.set	pop				\n"
 			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m)
-			: "ir" (1UL << bit));
+			: "ir" (1UL << bit)
+			: __LLSC_CLOBBER);
 		} while (unlikely(!temp));
 	} else
 		__mips_change_bit(nr, addr);
@@ -244,7 +252,7 @@ static inline int test_and_set_bit(unsigned long nr,
 		"	.set	pop					\n"
 		: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
 		: "r" (1UL << bit)
-		: "memory");
+		: __LLSC_CLOBBER);
 	} else if (kernel_uses_llsc) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
@@ -260,7 +268,7 @@ static inline int test_and_set_bit(unsigned long nr,
 			"	.set	pop				\n"
 			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
 			: "r" (1UL << bit)
-			: "memory");
+			: __LLSC_CLOBBER);
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
@@ -301,7 +309,7 @@ static inline int test_and_set_bit_lock(unsigned long nr,
 		"	.set	pop					\n"
 		: "=&r" (temp), "+m" (*m), "=&r" (res)
 		: "r" (1UL << bit)
-		: "memory");
+		: __LLSC_CLOBBER);
 	} else if (kernel_uses_llsc) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
@@ -317,7 +325,7 @@ static inline int test_and_set_bit_lock(unsigned long nr,
 			"	.set	pop				\n"
 			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
 			: "r" (1UL << bit)
-			: "memory");
+			: __LLSC_CLOBBER);
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
@@ -360,7 +368,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 		"	.set	pop					\n"
 		: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
 		: "r" (1UL << bit)
-		: "memory");
+		: __LLSC_CLOBBER);
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	} else if (kernel_uses_llsc && __builtin_constant_p(nr)) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
@@ -375,7 +383,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 			"	" __SC	"%0, %1				\n"
 			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
 			: "ir" (bit)
-			: "memory");
+			: __LLSC_CLOBBER);
 		} while (unlikely(!temp));
 #endif
 	} else if (kernel_uses_llsc) {
@@ -394,7 +402,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 			"	.set	pop				\n"
 			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
 			: "r" (1UL << bit)
-			: "memory");
+			: __LLSC_CLOBBER);
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
@@ -437,7 +445,7 @@ static inline int test_and_change_bit(unsigned long nr,
 		"	.set	pop					\n"
 		: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
 		: "r" (1UL << bit)
-		: "memory");
+		: __LLSC_CLOBBER);
 	} else if (kernel_uses_llsc) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
@@ -453,7 +461,7 @@ static inline int test_and_change_bit(unsigned long nr,
 			"	.set	pop				\n"
 			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
 			: "r" (1UL << bit)
-			: "memory");
+			: __LLSC_CLOBBER);
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h
index f5994a332673b..c8a47d18f6288 100644
--- a/arch/mips/include/asm/cmpxchg.h
+++ b/arch/mips/include/asm/cmpxchg.h
@@ -61,7 +61,7 @@ extern unsigned long __xchg_called_with_bad_pointer(void)
 		"	.set	pop				\n"	\
 		: "=&r" (__ret), "=" GCC_OFF_SMALL_ASM() (*m)		\
 		: GCC_OFF_SMALL_ASM() (*m), "Jr" (val)			\
-		: "memory");						\
+		: __LLSC_CLOBBER);					\
 	} else {							\
 		unsigned long __flags;					\
 									\
@@ -134,8 +134,8 @@ static inline unsigned long __xchg(volatile void *ptr, unsigned long x,
 		"	.set	pop				\n"	\
 		"2:						\n"	\
 		: "=&r" (__ret), "=" GCC_OFF_SMALL_ASM() (*m)		\
-		: GCC_OFF_SMALL_ASM() (*m), "Jr" (old), "Jr" (new)		\
-		: "memory");						\
+		: GCC_OFF_SMALL_ASM() (*m), "Jr" (old), "Jr" (new)	\
+		: __LLSC_CLOBBER);					\
 		loongson_llsc_mb();					\
 	} else {							\
 		unsigned long __flags;					\
-- 
2.20.1

[PATCH AUTOSEL 5.3 19/49] MIPS: lantiq: update the clock alias' for the mainline PCIe PHY driver

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit ed90302be64a53d9031c8ce05428c358b16a5d96 ]

The mainline PCIe PHY driver has it's own devicetree node. Update the
clock alias so the mainline driver finds the clocks.

The first PCIe PHY is located at 0x1f106800 and exists on VRX200, ARX300
and GRX390.
The second PCIe PHY is located at 0x1f700400 and exists on ARX300 and
GRX390.
The third PCIe PHY is located at 0x1f106a00 and exists onl on GRX390.
Lantiq's board support package (called "UGW") names these registers
"PDI".

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: john@phrozen.org
Cc: kishon@ti.com
Cc: ralf@linux-mips.org
Cc: robh+dt@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: hauke@hauke-m.de
Cc: mark.rutland@arm.com
Cc: ms@dev.tdt.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/lantiq/xway/sysctrl.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index b4323b2214e20..156a95ac5c725 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -468,14 +468,14 @@ void __init ltq_soc_init(void)
 		clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB0_P);
 		clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB1_P);
 		/* rc 0 */
-		clkdev_add_pmu("1d900000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE0_P);
+		clkdev_add_pmu("1f106800.phy", "phy", 1, 2, PMU_ANALOG_PCIE0_P);
 		clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI);
-		clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI);
+		clkdev_add_pmu("1f106800.phy", "pdi", 1, 1, PMU1_PCIE_PDI);
 		clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL);
 		/* rc 1 */
-		clkdev_add_pmu("19000000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE1_P);
+		clkdev_add_pmu("1f700400.phy", "phy", 1, 2, PMU_ANALOG_PCIE1_P);
 		clkdev_add_pmu("19000000.pcie", "msi", 1, 1, PMU1_PCIE1_MSI);
-		clkdev_add_pmu("19000000.pcie", "pdi", 1, 1, PMU1_PCIE1_PDI);
+		clkdev_add_pmu("1f700400.phy", "pdi", 1, 1, PMU1_PCIE1_PDI);
 		clkdev_add_pmu("19000000.pcie", "ctl", 1, 1, PMU1_PCIE1_CTL);
 	}
 
@@ -499,9 +499,9 @@ void __init ltq_soc_init(void)
 		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0);
 		clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1);
 		/* rc 2 */
-		clkdev_add_pmu("1a800000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE2_P);
+		clkdev_add_pmu("1f106a00.pcie", "phy", 1, 2, PMU_ANALOG_PCIE2_P);
 		clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI);
-		clkdev_add_pmu("1a800000.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI);
+		clkdev_add_pmu("1f106a00.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI);
 		clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL);
 		clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP);
 		clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
@@ -526,10 +526,10 @@ void __init ltq_soc_init(void)
 		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM);
 		clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 0, PMU_USB1_P);
 		clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1 | PMU_AHBM);
-		clkdev_add_pmu("1d900000.pcie", "phy", 1, 1, PMU1_PCIE_PHY);
+		clkdev_add_pmu("1f106800.phy", "phy", 1, 1, PMU1_PCIE_PHY);
 		clkdev_add_pmu("1d900000.pcie", "bus", 1, 0, PMU_PCIE_CLK);
 		clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI);
-		clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI);
+		clkdev_add_pmu("1f106800.phy", "pdi", 1, 1, PMU1_PCIE_PDI);
 		clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL);
 		clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS);
 
-- 
2.20.1

[PATCH AUTOSEL 5.3 20/49] firmware: bcm47xx_nvram: Correct size_t printf format

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit feb4eb060c3aecc3c5076bebe699cd09f1133c41 ]

When building on a 64-bit host, we will get warnings like those:

drivers/firmware/broadcom/bcm47xx_nvram.c:103:3: note: in expansion of macro 'pr_err'
   pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
   ^~~~~~
drivers/firmware/broadcom/bcm47xx_nvram.c:103:28: note: format string is defined here
   pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
                           ~^
                           %li

Use %zu instead for that purpose.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Cc: joe@perches.com
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/broadcom/bcm47xx_nvram.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/broadcom/bcm47xx_nvram.c b/drivers/firmware/broadcom/bcm47xx_nvram.c
index 77eb74666ecbc..6d2820f6aca13 100644
--- a/drivers/firmware/broadcom/bcm47xx_nvram.c
+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
@@ -96,7 +96,7 @@ static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
 		nvram_len = size;
 	}
 	if (nvram_len >= NVRAM_SPACE) {
-		pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+		pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
 		       nvram_len, NVRAM_SPACE - 1);
 		nvram_len = NVRAM_SPACE - 1;
 	}
@@ -148,7 +148,7 @@ static int nvram_init(void)
 	    header.len > sizeof(header)) {
 		nvram_len = header.len;
 		if (nvram_len >= NVRAM_SPACE) {
-			pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+			pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
 				header.len, NVRAM_SPACE);
 			nvram_len = NVRAM_SPACE - 1;
 		}
-- 
2.20.1

[PATCH AUTOSEL 5.3 47/49] mips: properly account for stack randomization and stack guard gap

[Sasha Levin]

From: Alexandre Ghiti <alex@ghiti.fr>

[ Upstream commit b1f61b5bde3a1f50392c97b4c8513d1b8efb1cf2 ]

This commit takes care of stack randomization and stack guard gap when
computing mmap base address and checks if the task asked for
randomization.  This fixes the problem uncovered and not fixed for arm
here: https://lkml.kernel.org/r/20170622200033.25714-1-riel@redhat.com

Link: http://lkml.kernel.org/r/20190730055113.23635-10-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/mm/mmap.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/mips/mm/mmap.c b/arch/mips/mm/mmap.c
index d79f2b4323187..f5c778113384b 100644
--- a/arch/mips/mm/mmap.c
+++ b/arch/mips/mm/mmap.c
@@ -21,8 +21,9 @@ unsigned long shm_align_mask = PAGE_SIZE - 1;	/* Sane caches */
 EXPORT_SYMBOL(shm_align_mask);
 
 /* gap between mmap and stack */
-#define MIN_GAP (128*1024*1024UL)
-#define MAX_GAP ((TASK_SIZE)/6*5)
+#define MIN_GAP		(128*1024*1024UL)
+#define MAX_GAP		((TASK_SIZE)/6*5)
+#define STACK_RND_MASK	(0x7ff >> (PAGE_SHIFT - 12))
 
 static int mmap_is_legacy(struct rlimit *rlim_stack)
 {
@@ -38,6 +39,15 @@ static int mmap_is_legacy(struct rlimit *rlim_stack)
 static unsigned long mmap_base(unsigned long rnd, struct rlimit *rlim_stack)
 {
 	unsigned long gap = rlim_stack->rlim_cur;
+	unsigned long pad = stack_guard_gap;
+
+	/* Account for stack randomization if necessary */
+	if (current->flags & PF_RANDOMIZE)
+		pad += (STACK_RND_MASK << PAGE_SHIFT);
+
+	/* Values close to RLIM_INFINITY can overflow. */
+	if (gap + pad > gap)
+		gap += pad;
 
 	if (gap < MIN_GAP)
 		gap = MIN_GAP;
-- 
2.20.1

Re: [PATCH AUTOSEL 5.3 20/49] firmware: bcm47xx_nvram: Correct size_t printf format

[Florian Fainelli]

On 9/29/2019 10:30 AM, Sasha Levin wrote:
> From: Florian Fainelli <f.fainelli@gmail.com>
> 
> [ Upstream commit feb4eb060c3aecc3c5076bebe699cd09f1133c41 ]
> 
> When building on a 64-bit host, we will get warnings like those:
> 
> drivers/firmware/broadcom/bcm47xx_nvram.c:103:3: note: in expansion of macro 'pr_err'
>    pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
>    ^~~~~~
> drivers/firmware/broadcom/bcm47xx_nvram.c:103:28: note: format string is defined here
>    pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
>                            ~^
>                            %li
> 
> Use %zu instead for that purpose.

This is not a fix that should be backported as it was done only to allow
the driver to the made buildable with COMPILE_TEST. Please drop it from
your auto-selection.

> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> Signed-off-by: Paul Burton <paul.burton@mips.com>
> Cc: linux-mips@linux-mips.org
> Cc: joe@perches.com
> Cc: Rafał Miłecki <zajec5@gmail.com>
> Cc: linux-mips@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/firmware/broadcom/bcm47xx_nvram.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/firmware/broadcom/bcm47xx_nvram.c b/drivers/firmware/broadcom/bcm47xx_nvram.c
> index 77eb74666ecbc..6d2820f6aca13 100644
> --- a/drivers/firmware/broadcom/bcm47xx_nvram.c
> +++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
> @@ -96,7 +96,7 @@ static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
>  		nvram_len = size;
>  	}
>  	if (nvram_len >= NVRAM_SPACE) {
> -		pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
> +		pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
>  		       nvram_len, NVRAM_SPACE - 1);
>  		nvram_len = NVRAM_SPACE - 1;
>  	}
> @@ -148,7 +148,7 @@ static int nvram_init(void)
>  	    header.len > sizeof(header)) {
>  		nvram_len = header.len;
>  		if (nvram_len >= NVRAM_SPACE) {
> -			pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
> +			pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
>  				header.len, NVRAM_SPACE);
>  			nvram_len = NVRAM_SPACE - 1;
>  		}
> 

-- 
Florian

Re: [PATCH AUTOSEL 5.3 20/49] firmware: bcm47xx_nvram: Correct size_t printf format

[Sasha Levin]

On Sun, Sep 29, 2019 at 12:39:05PM -0700, Florian Fainelli wrote:
>
>
>On 9/29/2019 10:30 AM, Sasha Levin wrote:
>> From: Florian Fainelli <f.fainelli@gmail.com>
>>
>> [ Upstream commit feb4eb060c3aecc3c5076bebe699cd09f1133c41 ]
>>
>> When building on a 64-bit host, we will get warnings like those:
>>
>> drivers/firmware/broadcom/bcm47xx_nvram.c:103:3: note: in expansion of macro 'pr_err'
>>    pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
>>    ^~~~~~
>> drivers/firmware/broadcom/bcm47xx_nvram.c:103:28: note: format string is defined here
>>    pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
>>                            ~^
>>                            %li
>>
>> Use %zu instead for that purpose.
>
>This is not a fix that should be backported as it was done only to allow
>the driver to the made buildable with COMPILE_TEST. Please drop it from
>your auto-selection.

Now dropped, thank you!

-- 
Thanks,
Sasha