From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Andrew Lunn <andrew@lunn.ch>, Chris Snook <chris.snook@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
James Hogan <jhogan@kernel.org>, Jay Cliburn <jcliburn@gmail.com>,
Mark Rutland <mark.rutland@arm.com>,
Paul Burton <paul.burton@mips.com>,
Ralf Baechle <ralf@linux-mips.org>,
Rob Herring <robh+dt@kernel.org>,
Vivien Didelot <vivien.didelot@gmail.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
"David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-mips@vger.kernel.org,
Russell King <linux@armlinux.org.uk>
Subject: [PATCH v3 3/5] MIPS: ath79: ar9331: add ar9331-switch node
Date: Mon, 21 Oct 2019 07:38:09 +0200 [thread overview]
Message-ID: <20191021053811.19818-4-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20191021053811.19818-1-o.rempel@pengutronix.de>
Add switch node supported by dsa ar9331 driver.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/mips/boot/dts/qca/ar9331.dtsi | 127 ++++++++++++++++++-
arch/mips/boot/dts/qca/ar9331_dpt_module.dts | 13 ++
2 files changed, 139 insertions(+), 1 deletion(-)
diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
index e0f409dd6acf..84a177c0d053 100644
--- a/arch/mips/boot/dts/qca/ar9331.dtsi
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -158,6 +158,9 @@
clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
clock-names = "eth", "mdio";
+ phy-mode = "mii";
+ phy-handle = <&phy_port4>;
+
status = "disabled";
};
@@ -165,13 +168,135 @@
compatible = "qca,ar9330-eth";
reg = <0x1a000000 0x200>;
interrupts = <5>;
-
resets = <&rst 13>, <&rst 23>;
reset-names = "mac", "mdio";
clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
clock-names = "eth", "mdio";
+ phy-mode = "gmii";
+
status = "disabled";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch10: switch@10 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "qca,ar9331-switch";
+ reg = <0x10>;
+ resets = <&rst 8>;
+ reset-names = "switch";
+
+ interrupt-parent = <&miscintc>;
+ interrupts = <12>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch_port0: port@0 {
+ reg = <0x0>;
+ label = "cpu";
+ ethernet = <ð1>;
+
+ phy-mode = "gmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ switch_port1: port@1 {
+ reg = <0x1>;
+ phy-handle = <&phy_port0>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+
+ switch_port2: port@2 {
+ reg = <0x2>;
+ phy-handle = <&phy_port1>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+
+ switch_port3: port@3 {
+ reg = <0x3>;
+ phy-handle = <&phy_port2>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+
+ switch_port4: port@4 {
+ reg = <0x4>;
+ phy-handle = <&phy_port3>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+
+ switch_port5: port@5 {
+ reg = <0x5>;
+ phy-handle = <&phy_port4>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&switch10>;
+
+ phy_port0: phy@0 {
+ reg = <0x0>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port1: phy@1 {
+ reg = <0x1>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port2: phy@2 {
+ reg = <0x2>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port3: phy@3 {
+ reg = <0x3>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port4: phy@4 {
+ reg = <0x4>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+ };
+ };
+ };
};
usb: usb@1b000100 {
diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
index 77bab823eb3b..0f2b20044834 100644
--- a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
+++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
@@ -84,3 +84,16 @@
ð1 {
status = "okay";
};
+
+&switch_port1 {
+ label = "lan0";
+ status = "okay";
+};
+
+&phy_port0 {
+ status = "okay";
+};
+
+&phy_port4 {
+ status = "okay";
+};
--
2.23.0
next prev parent reply other threads:[~2019-10-21 5:38 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-21 5:38 [PATCH v3 0/5] add dsa switch support for ar9331 Oleksij Rempel
2019-10-21 5:38 ` [PATCH v3 1/5] net: ag71xx: port to phylink Oleksij Rempel
2019-10-21 22:21 ` Russell King - ARM Linux admin
2019-10-22 5:12 ` Oleksij Rempel
2019-10-21 5:38 ` [PATCH v3 2/5] dt-bindings: net: dsa: qca,ar9331 switch documentation Oleksij Rempel
2019-10-21 5:38 ` Oleksij Rempel [this message]
2019-10-21 5:38 ` [PATCH v3 4/5] net: dsa: add support for Atheros AR9331 TAG format Oleksij Rempel
2019-10-21 15:49 ` Andrew Lunn
2019-10-21 18:36 ` Oleksij Rempel
2019-10-21 5:38 ` [PATCH v3 5/5] net: dsa: add support for Atheros AR9331 build-in switch Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191021053811.19818-4-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=andrew@lunn.ch \
--cc=chris.snook@gmail.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=jcliburn@gmail.com \
--cc=jhogan@kernel.org \
--cc=kernel@pengutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=paul.burton@mips.com \
--cc=ralf@linux-mips.org \
--cc=robh+dt@kernel.org \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).