* [PATCH 00/29] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name
@ 2020-10-20 11:59 Serge Semin
2020-10-20 11:59 ` [PATCH 12/29] mips: dts: jz47x: Harmonize EHCI/OHCI DT " Serge Semin
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Serge Semin @ 2020-10-20 11:59 UTC (permalink / raw)
To: Felipe Balbi, Krzysztof Kozlowski, Florian Fainelli, Rob Herring,
Greg Kroah-Hartman
Cc: Serge Semin, Serge Semin, linux-arm-kernel, linux-usb,
devicetree, linux-kernel, Vineet Gupta, Rafal Milecki, Wei Xu,
Thomas Bogendoerfer, Michael Ellerman, Jason Cooper,
Santosh Shilimkar, Shawn Guo, Benoit Cousson, Patrice Chotard,
Maxime Ripard, Khuong Dinh, Andy Gross, Alexey Brodkin,
Hauke Mehrtens, Maxime Coquelin, Alexandre Torgue,
Amelie Delaunay, Vladimir Zapolskiy, Paul Cercueil,
Matthias Brugger, Benjamin Herrenschmidt, Paul Mackerras,
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Kukjin Kim,
Li Yang, Tony Lindgren, Chen-Yu Tsai, Bjorn Andersson,
linux-snps-arc, bcm-kernel-feedback-list, linux-stm32,
linux-mips, linux-mediatek, linuxppc-dev, linux-samsung-soc,
linux-omap, linux-arm-msm
As the subject states this series is an attempt to harmonize the xHCI,
EHCI, OHCI and DWC USB3 DT nodes with the DT schema introduced in the
framework of the patchset [1].
Firstly as Krzysztof suggested we've removed a support of DWC USB3
controllers with "synopsys,"-vendor prefix compatible string in favor of
the ones with valid "snps,"-prefix. It's done in the controller driver and
in all the DTS files, which have been unfortunate to define such nodes.
Secondly we suggest to fix the snps,quirk-frame-length-adjustment property
declaration in the Amlogic meson-g12-common.dtsi DTS file, since it has
been erroneously declared as boolean while having uint32 type. Neil said
it was ok to init that property with 0x20 value.
Thirdly the main part of the patchset concern fixing the xHCI, EHCI/OHCI
and DWC USB3 DT nodes name as in accordance with their DT schema the
corresponding node name is suppose to comply with the Generic USB HCD DT
schema, which requires the USB nodes to have the name acceptable by the
regexp: "^usb(@.*)?". Such requirement had been applicable even before we
introduced the new DT schema in [1], but as we can see it hasn't been
strictly implemented for a lot the DTS files. Since DT schema is now
available the automated DTS validation shall make sure that the rule isn't
violated.
Note most of these patches have been a part of the last three patches of
[1]. But since there is no way to have them merged in in a combined
manner, I had to move them to the dedicated series and split them up so to
be accepted by the corresponding subsystem maintainers one-by-one.
[1] Link: https://lore.kernel.org/linux-usb/20201014101402.18271-1-Sergey.Semin@baikalelectronics.ru/
Changelog v0:
- As Krzysztof suggested I've created a script which checked whether the
node names had been also updated in all the depended dts files. As a
result I found two more files which should have been also modified:
arch/arc/boot/dts/{axc003.dtsi,axc003_idu.dtsi}
- Correct the USB DWC3 nodes name found in
arch/arm64/boot/dts/apm/{apm-storm.dtsi,apm-shadowcat.dtsi} too.
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Rafal Milecki <zajec5@gmail.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Khuong Dinh <khuong@os.amperecomputing.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Serge Semin (29):
usb: dwc3: Discard synopsys,dwc3 compatibility string
arm: dts: keystone: Correct DWC USB3 compatible string
arm: dts: am437x: Correct DWC USB3 compatible string
arm: dts: exynos: Correct DWC USB3 compatible string
arm64: dts: amlogic: meson-g12: Set FL-adj property value
arc: dts: Harmonize EHCI/OHCI DT nodes name
arm: dts: bcm53x: Harmonize EHCI/OHCI DT nodes name
arm: dts: stm32: Harmonize EHCI/OHCI DT nodes name
arm: dts: hisi-x5hd2: Harmonize EHCI/OHCI DT nodes name
arm: dts: lpc18xx: Harmonize EHCI/OHCI DT nodes name
arm64: dts: hisi: Harmonize EHCI/OHCI DT nodes name
mips: dts: jz47x: Harmonize EHCI/OHCI DT nodes name
mips: dts: sead3: Harmonize EHCI/OHCI DT nodes name
mips: dts: ralink: mt7628a: Harmonize EHCI/OHCI DT nodes name
powerpc: dts: akebono: Harmonize EHCI/OHCI DT nodes name
arm: dts: bcm5301x: Harmonize xHCI DT nodes name
arm64: dts: marvell: cp11x: Harmonize xHCI DT nodes name
arm: dts: marvell: armada-375: Harmonize DWC USB3 DT nodes name
arm: dts: exynos: Harmonize DWC USB3 DT nodes name
arm: dts: keystone: Harmonize DWC USB3 DT nodes name
arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
arm: dts: omap5: Harmonize DWC USB3 DT nodes name
arm: dts: stih407-family: Harmonize DWC USB3 DT nodes name
arm64: dts: allwinner: h6: Harmonize DWC USB3 DT nodes name
arm64: dts: apm: Harmonize DWC USB3 DT nodes name
arm64: dts: exynos: Harmonize DWC USB3 DT nodes name
arm64: dts: layerscape: Harmonize DWC USB3 DT nodes name
arm64: dts: hi3660: Harmonize DWC USB3 DT nodes name
arm64: dts: qcom: Harmonize DWC USB3 DT nodes name
arch/arc/boot/dts/axc003.dtsi | 4 ++--
arch/arc/boot/dts/axc003_idu.dtsi | 4 ++--
arch/arc/boot/dts/axs10x_mb.dtsi | 4 ++--
arch/arc/boot/dts/hsdk.dts | 4 ++--
arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 2 +-
arch/arm/boot/dts/am437x-l4.dtsi | 4 ++--
arch/arm/boot/dts/armada-375.dtsi | 2 +-
arch/arm/boot/dts/bcm5301x.dtsi | 6 +++---
arch/arm/boot/dts/bcm53573.dtsi | 4 ++--
arch/arm/boot/dts/exynos5250.dtsi | 4 ++--
arch/arm/boot/dts/exynos54xx.dtsi | 4 ++--
arch/arm/boot/dts/hisi-x5hd2.dtsi | 4 ++--
arch/arm/boot/dts/keystone-k2e.dtsi | 6 +++---
arch/arm/boot/dts/keystone.dtsi | 4 ++--
arch/arm/boot/dts/lpc18xx.dtsi | 4 ++--
arch/arm/boot/dts/ls1021a.dtsi | 2 +-
arch/arm/boot/dts/omap5-l4.dtsi | 2 +-
arch/arm/boot/dts/stih407-family.dtsi | 2 +-
arch/arm/boot/dts/stm32mp151.dtsi | 4 ++--
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 +-
arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 4 ++--
arch/arm64/boot/dts/apm/apm-storm.dtsi | 6 +++---
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 4 ++--
arch/arm64/boot/dts/exynos/exynos7.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 6 +++---
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++--
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 2 +-
arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 4 ++--
arch/arm64/boot/dts/hisilicon/hip06.dtsi | 4 ++--
arch/arm64/boot/dts/hisilicon/hip07.dtsi | 4 ++--
arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs404.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +-
arch/mips/boot/dts/ingenic/jz4770.dtsi | 2 +-
arch/mips/boot/dts/mti/sead3.dts | 2 +-
arch/mips/boot/dts/ralink/mt7628a.dtsi | 2 +-
arch/powerpc/boot/dts/akebono.dts | 6 +++---
drivers/usb/dwc3/core.c | 3 ---
49 files changed, 84 insertions(+), 87 deletions(-)
--
2.27.0
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 12/29] mips: dts: jz47x: Harmonize EHCI/OHCI DT nodes name
2020-10-20 11:59 [PATCH 00/29] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
@ 2020-10-20 11:59 ` Serge Semin
2020-10-20 12:40 ` Krzysztof Kozlowski
2020-10-20 11:59 ` [PATCH 13/29] mips: dts: sead3: " Serge Semin
2020-10-20 11:59 ` [PATCH 14/29] mips: dts: ralink: mt7628a: " Serge Semin
2 siblings, 1 reply; 7+ messages in thread
From: Serge Semin @ 2020-10-20 11:59 UTC (permalink / raw)
To: Felipe Balbi, Krzysztof Kozlowski, Florian Fainelli, Rob Herring,
Greg Kroah-Hartman, Paul Cercueil, Thomas Bogendoerfer
Cc: Serge Semin, Serge Semin, linux-arm-kernel, linux-usb,
devicetree, linux-kernel, linux-mips
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Paul Cercueil <paul@crapouillou.net>
---
arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +-
arch/mips/boot/dts/ingenic/jz4770.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index 1520585c235c..b989ff62ffbc 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -281,7 +281,7 @@ dmac: dma-controller@13020000 {
clocks = <&cgu JZ4740_CLK_DMA>;
};
- uhc: uhc@13030000 {
+ uhc: usb@13030000 {
compatible = "ingenic,jz4740-ohci", "generic-ohci";
reg = <0x13030000 0x1000>;
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index fa11ac950499..e45c03038826 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -417,7 +417,7 @@ dmac1: dma-controller@13420100 {
interrupts = <23>;
};
- uhc: uhc@13430000 {
+ uhc: usb@13430000 {
compatible = "generic-ohci";
reg = <0x13430000 0x1000>;
--
2.27.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 13/29] mips: dts: sead3: Harmonize EHCI/OHCI DT nodes name
2020-10-20 11:59 [PATCH 00/29] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
2020-10-20 11:59 ` [PATCH 12/29] mips: dts: jz47x: Harmonize EHCI/OHCI DT " Serge Semin
@ 2020-10-20 11:59 ` Serge Semin
2020-10-20 12:37 ` Krzysztof Kozlowski
2020-10-20 11:59 ` [PATCH 14/29] mips: dts: ralink: mt7628a: " Serge Semin
2 siblings, 1 reply; 7+ messages in thread
From: Serge Semin @ 2020-10-20 11:59 UTC (permalink / raw)
To: Felipe Balbi, Krzysztof Kozlowski, Florian Fainelli, Rob Herring,
Greg Kroah-Hartman, Thomas Bogendoerfer
Cc: Serge Semin, Serge Semin, linux-arm-kernel, linux-usb,
devicetree, linux-kernel, linux-mips
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
arch/mips/boot/dts/mti/sead3.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
index 192c26ff1d3d..1cf6728af8fe 100644
--- a/arch/mips/boot/dts/mti/sead3.dts
+++ b/arch/mips/boot/dts/mti/sead3.dts
@@ -56,7 +56,7 @@ gic: interrupt-controller@1b1c0000 {
interrupt-parent = <&cpu_intc>;
};
- ehci@1b200000 {
+ usb@1b200000 {
compatible = "generic-ehci";
reg = <0x1b200000 0x1000>;
--
2.27.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 14/29] mips: dts: ralink: mt7628a: Harmonize EHCI/OHCI DT nodes name
2020-10-20 11:59 [PATCH 00/29] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
2020-10-20 11:59 ` [PATCH 12/29] mips: dts: jz47x: Harmonize EHCI/OHCI DT " Serge Semin
2020-10-20 11:59 ` [PATCH 13/29] mips: dts: sead3: " Serge Semin
@ 2020-10-20 11:59 ` Serge Semin
2020-10-20 12:38 ` Krzysztof Kozlowski
2 siblings, 1 reply; 7+ messages in thread
From: Serge Semin @ 2020-10-20 11:59 UTC (permalink / raw)
To: Felipe Balbi, Krzysztof Kozlowski, Florian Fainelli, Rob Herring,
Greg Kroah-Hartman, Thomas Bogendoerfer, Matthias Brugger
Cc: Serge Semin, Serge Semin, linux-arm-kernel, linux-usb,
devicetree, linux-kernel, linux-mips, linux-mediatek
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
arch/mips/boot/dts/ralink/mt7628a.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi
index 892e8ab863c5..45bf96a3d17a 100644
--- a/arch/mips/boot/dts/ralink/mt7628a.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi
@@ -275,7 +275,7 @@ usb_phy: usb-phy@10120000 {
reset-names = "host", "device";
};
- ehci@101c0000 {
+ usb@101c0000 {
compatible = "generic-ehci";
reg = <0x101c0000 0x1000>;
--
2.27.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 13/29] mips: dts: sead3: Harmonize EHCI/OHCI DT nodes name
2020-10-20 11:59 ` [PATCH 13/29] mips: dts: sead3: " Serge Semin
@ 2020-10-20 12:37 ` Krzysztof Kozlowski
0 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2020-10-20 12:37 UTC (permalink / raw)
To: Serge Semin
Cc: Felipe Balbi, Florian Fainelli, Rob Herring, Greg Kroah-Hartman,
Thomas Bogendoerfer, Serge Semin, linux-arm-kernel, linux-usb,
devicetree, linux-kernel, linux-mips
On Tue, Oct 20, 2020 at 02:59:43PM +0300, Serge Semin wrote:
> In accordance with the Generic EHCI/OHCI bindings the corresponding node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
> nodes are correctly named.
>
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> ---
> arch/mips/boot/dts/mti/sead3.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 14/29] mips: dts: ralink: mt7628a: Harmonize EHCI/OHCI DT nodes name
2020-10-20 11:59 ` [PATCH 14/29] mips: dts: ralink: mt7628a: " Serge Semin
@ 2020-10-20 12:38 ` Krzysztof Kozlowski
0 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2020-10-20 12:38 UTC (permalink / raw)
To: Serge Semin
Cc: Felipe Balbi, Florian Fainelli, Rob Herring, Greg Kroah-Hartman,
Thomas Bogendoerfer, Matthias Brugger, Serge Semin,
linux-arm-kernel, linux-usb, devicetree, linux-kernel,
linux-mips, linux-mediatek
On Tue, Oct 20, 2020 at 02:59:44PM +0300, Serge Semin wrote:
> In accordance with the Generic EHCI/OHCI bindings the corresponding node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
> nodes are correctly named.
>
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> ---
> arch/mips/boot/dts/ralink/mt7628a.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 12/29] mips: dts: jz47x: Harmonize EHCI/OHCI DT nodes name
2020-10-20 11:59 ` [PATCH 12/29] mips: dts: jz47x: Harmonize EHCI/OHCI DT " Serge Semin
@ 2020-10-20 12:40 ` Krzysztof Kozlowski
0 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2020-10-20 12:40 UTC (permalink / raw)
To: Serge Semin
Cc: Felipe Balbi, Florian Fainelli, Rob Herring, Greg Kroah-Hartman,
Paul Cercueil, Thomas Bogendoerfer, Serge Semin,
linux-arm-kernel, linux-usb, devicetree, linux-kernel,
linux-mips
On Tue, Oct 20, 2020 at 02:59:42PM +0300, Serge Semin wrote:
> In accordance with the Generic EHCI/OHCI bindings the corresponding node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
> nodes are correctly named.
>
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Acked-by: Paul Cercueil <paul@crapouillou.net>
> ---
> arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +-
> arch/mips/boot/dts/ingenic/jz4770.dtsi | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-10-20 12:40 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-20 11:59 [PATCH 00/29] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
2020-10-20 11:59 ` [PATCH 12/29] mips: dts: jz47x: Harmonize EHCI/OHCI DT " Serge Semin
2020-10-20 12:40 ` Krzysztof Kozlowski
2020-10-20 11:59 ` [PATCH 13/29] mips: dts: sead3: " Serge Semin
2020-10-20 12:37 ` Krzysztof Kozlowski
2020-10-20 11:59 ` [PATCH 14/29] mips: dts: ralink: mt7628a: " Serge Semin
2020-10-20 12:38 ` Krzysztof Kozlowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).