[PATCH AUTOSEL 4.9 08/48] mips: ar7: add missing iounmap() on error in ar7_gpio_init

[PATCH AUTOSEL 4.9 08/48] mips: ar7: add missing iounmap() on error in ar7_gpio_init

[Sasha Levin]

From: Qinglang Miao <miaoqinglang@huawei.com>

[ Upstream commit 5a5aa912f687204d50455d0db36f94dd8de601c2 ]

Add the missing iounmap() of gpch->regs before return from
ar7_gpio_init() in the error handling case.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/ar7/gpio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
index ed5b3d297caf3..83316b5587776 100644
--- a/arch/mips/ar7/gpio.c
+++ b/arch/mips/ar7/gpio.c
@@ -331,6 +331,7 @@ int __init ar7_gpio_init(void)
 	if (ret) {
 		printk(KERN_ERR "%s: failed to add gpiochip\n",
 					gpch->chip.label);
+		iounmap(gpch->regs);
 		return ret;
 	}
 	printk(KERN_INFO "%s: registered %d GPIOs\n",
-- 
2.27.0

[PATCH AUTOSEL 4.9 14/48] MIPS: BMC47xx: fix kconfig dependency bug for BCM47XX_SSB

[Sasha Levin]

From: Necip Fazil Yildiran <fazilyildiran@gmail.com>

[ Upstream commit 09a48cbcd7af9203296938044f1100bb113ce01a ]

When BCM47XX_SSB is enabled and SSB_PCIHOST is disabled, it results in the
following Kbuild warning:

WARNING: unmet direct dependencies detected for SSB_B43_PCI_BRIDGE
  Depends on [n]: SSB [=y] && SSB_PCIHOST [=n]
  Selected by [y]:
  - BCM47XX_SSB [=y] && BCM47XX [=y] && PCI [=y]

The reason is that BCM47XX_SSB selects SSB_B43_PCI_BRIDGE without
depending on or selecting SSB_PCIHOST while SSB_B43_PCI_BRIDGE depends on
SSB_PCIHOST. This can also fail building the kernel as demonstrated in a
bug report.

Honor the kconfig dependency to remove unmet direct dependency warnings
and avoid any potential build failures.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=210051
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/bcm47xx/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig
index e970fd9cf7693..83b80ffe803a0 100644
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -8,6 +8,7 @@ config BCM47XX_SSB
 	select SSB_DRIVER_MIPS
 	select SSB_DRIVER_EXTIF
 	select SSB_EMBEDDED
+	select SSB_PCIHOST if PCI
 	select SSB_B43_PCI_BRIDGE if PCI
 	select SSB_DRIVER_PCICORE if PCI
 	select SSB_PCICORE_HOSTMODE if PCI
-- 
2.27.0

[PATCH AUTOSEL 4.9 36/48] MIPS: KASLR: Avoid endless loop in sync_icache if synci_step is zero

[Sasha Levin]

From: Jinyang He <hejinyang@loongson.cn>

[ Upstream commit c0aac3a51cb6364bed367ee3e1a96ed414f386b4 ]

Most platforms do not need to do synci instruction operations when
synci_step is 0. But for example, the synci implementation on Loongson64
platform has some changes. On the one hand, it ensures that the memory
access instructions have been completed. On the other hand, it guarantees
that all prefetch instructions need to be fetched again. And its address
information is useless. Thus, only one synci operation is required when
synci_step is 0 on Loongson64 platform. I guess that some other platforms
have similar implementations on synci, so add judgment conditions in
`while` to ensure that at least all platforms perform synci operations
once. For those platforms that do not need synci, they just do one more
operation similar to nop.

Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/relocate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/kernel/relocate.c b/arch/mips/kernel/relocate.c
index 1958910b75c07..f759aae1e1f3d 100644
--- a/arch/mips/kernel/relocate.c
+++ b/arch/mips/kernel/relocate.c
@@ -52,7 +52,7 @@ static void __init sync_icache(void *kbase, unsigned long kernel_length)
 			: "r" (kbase));
 
 		kbase += step;
-	} while (kbase < kend);
+	} while (step && kbase < kend);
 
 	/* Completion barrier */
 	__sync();
-- 
2.27.0