[PATCH v4 0/6] spi: cadence-qspi: add Mobileye EyeQ5 support

[PATCH v4 0/6] spi: cadence-qspi: add Mobileye EyeQ5 support

[Théo Lebrun]

Hi all,

V4 of this series adding octal SPI-NOR support to Mobileye EyeQ5
platform. It has been tested on EyeQ5 hardware successfully. Patches
have been taken over time, meaning series got smaller over time.

Patches:
 - Make cdns,fifo-depth optional by computing it from hardware.
 - No-IRQ mode for indirect read operations. Behind a quirk flag.
 - Busywait on commands and indirect reads; reduces hrtimeouts load.
 - Add mobileye,eyeq5-ospi compatible.
 - EyeQ5 devicetree:
    - Add octal SPI-NOR node.
    - Add SPI-NOR flash node on eval board.

There is no dependency except if you want zero errors in devicetree:
system-controller series [3] for <&clocks> phandle.

Have a nice day,
Théo

[0]: https://lore.kernel.org/lkml/20240216174227.409400-1-gregory.clement@bootlin.com/
[1]: https://lore.kernel.org/linux-mips/20240209-regname-v1-0-2125efa016ef@flygoat.com/
[2]: https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/log/
[3]: https://lore.kernel.org/lkml/20240301-mbly-clk-v9-0-cbf06eb88708@bootlin.com/
[4]: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git/log/
[5]: https://lore.kernel.org/lkml/20240308-cdns-qspi-mbly-v1-0-a503856dd205@bootlin.com/
[6]: https://lore.kernel.org/lkml/171259906078.120310.15397790336440498713.b4-ty@kernel.org/

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
Changes in v4:
- Fix -Wunused-variable warning on patch "allow FIFO depth detection"
  by dropping two unused local variables.
- Rebase onto spi/for-next, drop three applied patches:
  - spi: dt-bindings: cdns,qspi-nor: sort compatibles alphabetically
  - spi: dt-bindings: cdns,qspi-nor: add mobileye,eyeq5-ospi compatible
  - spi: dt-bindings: cdns,qspi-nor: make cdns,fifo-depth optional
- Link to v3: https://lore.kernel.org/r/20240410-cdns-qspi-mbly-v3-0-7b7053449cf7@bootlin.com

Changes in v3:
- dt-bindings:
  - Patch "sort compatibles alphabetically":
    - Moved first.
    - Take Reviewed-By Krzysztof.
  - Patch "add mobileye,eyeq5-ospi compatible":
  - EyeQ5 no longer implies no cdns,fifo-depth prop. Patch now only adds
    compatible, no more property conditional.
  - New "make cdns,fifo-depth optional" patch, for all compatibles.
- Driver:
  - FIFO depth detection is no longer a quirk. It is for all compatibles
    if no DT property is provided.
  - Rebase onto spi-next [4] to drop three patches. No-IRQ mode patch is
    mentioned in email saying a subset of patches got applied [6].
    However, it is not in spi-next, so it is kept in series.
  - Busywait is no longer behind a quirk; it applies to all compatibles.
  - No-IRQ mode patch got modified to change its quirk index because
    previous quirk got removed.
  - As we removed some quirks, we no longer overflow u8 quirks.
- Link to v2: https://lore.kernel.org/r/20240405-cdns-qspi-mbly-v2-0-956679866d6d@bootlin.com

Changes in v2:
- Rebase upon v6.9-rc2.
- Fix dt-bindings commit subject tags.
- Take Reviewed-by: Krzysztof Kozlowski on dt-bindings commit.
- Add dt-bindings commit to order compatibles alphabetically.
  Krzysztof: unsure if you want this. It is second so that commit
  adding EyeQ5 compatible can be taken alone easily.
- Drop patch taken upstream:
  spi: cadence-qspi: switch from legacy names to modern ones
- Add To: Rob Herring, following get_maintainer.pl recommendation.
- Link to v1: https://lore.kernel.org/r/20240308-cdns-qspi-mbly-v1-0-a503856dd205@bootlin.com

---
Théo Lebrun (6):
      spi: cadence-qspi: allow FIFO depth detection
      spi: cadence-qspi: add no-IRQ mode to indirect reads
      spi: cadence-qspi: add early busywait to cqspi_wait_for_bit()
      spi: cadence-qspi: add mobileye,eyeq5-ospi compatible
      MIPS: mobileye: eyeq5: Add SPI-NOR controller node
      MIPS: mobileye: eyeq5: add octal flash node to eval board DTS

 arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 15 +++++
 arch/mips/boot/dts/mobileye/eyeq5.dtsi     | 15 +++++
 drivers/spi/spi-cadence-quadspi.c          | 91 +++++++++++++++++++++++-------
 3 files changed, 102 insertions(+), 19 deletions(-)
---
base-commit: 9deae5003d0e89ec6ef15879a70ba6fb43e15029
change-id: 20240209-cdns-qspi-mbly-de2205a44ab3

Best regards,
-- 
Théo Lebrun <theo.lebrun@bootlin.com>

[PATCH v4 1/6] spi: cadence-qspi: allow FIFO depth detection

[Théo Lebrun]

If FIFO depth DT property is provided, check it matches what hardware
reports and warn otherwise. Else, use hardware provided value.

Hardware exposes FIFO depth indirectly because
CQSPI_REG_SRAMPARTITION is partially read-only.

Move probe cqspi->ddata assignment prior to cqspi_of_get_pdata() call.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 drivers/spi/spi-cadence-quadspi.c | 37 ++++++++++++++++++++++++++++++-------
 1 file changed, 30 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 9896e9fe7ffb..5a83940220a9 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -1510,8 +1510,8 @@ static int cqspi_of_get_pdata(struct cqspi_st *cqspi)
 	cqspi->is_decoded_cs = of_property_read_bool(np, "cdns,is-decoded-cs");
 
 	if (of_property_read_u32(np, "cdns,fifo-depth", &cqspi->fifo_depth)) {
-		dev_err(dev, "couldn't determine fifo-depth\n");
-		return -ENXIO;
+		/* Zero signals FIFO depth should be runtime detected. */
+		cqspi->fifo_depth = 0;
 	}
 
 	if (of_property_read_u32(np, "cdns,fifo-width", &cqspi->fifo_width)) {
@@ -1541,8 +1541,6 @@ static void cqspi_controller_init(struct cqspi_st *cqspi)
 {
 	u32 reg;
 
-	cqspi_controller_enable(cqspi, 0);
-
 	/* Configure the remap address register, no remap */
 	writel(0, cqspi->iobase + CQSPI_REG_REMAP);
 
@@ -1576,8 +1574,29 @@ static void cqspi_controller_init(struct cqspi_st *cqspi)
 		reg |= CQSPI_REG_CONFIG_DMA_MASK;
 		writel(reg, cqspi->iobase + CQSPI_REG_CONFIG);
 	}
+}
 
-	cqspi_controller_enable(cqspi, 1);
+static void cqspi_controller_detect_fifo_depth(struct cqspi_st *cqspi)
+{
+	struct device *dev = &cqspi->pdev->dev;
+	u32 reg, fifo_depth;
+
+	/*
+	 * Bits N-1:0 are writable while bits 31:N are read as zero, with 2^N
+	 * the FIFO depth.
+	 */
+	writel(U32_MAX, cqspi->iobase + CQSPI_REG_SRAMPARTITION);
+	reg = readl(cqspi->iobase + CQSPI_REG_SRAMPARTITION);
+	fifo_depth = reg + 1;
+
+	/* FIFO depth of zero means no value from devicetree was provided. */
+	if (cqspi->fifo_depth == 0) {
+		cqspi->fifo_depth = fifo_depth;
+		dev_dbg(dev, "using FIFO depth of %u\n", fifo_depth);
+	} else if (fifo_depth != cqspi->fifo_depth) {
+		dev_warn(dev, "detected FIFO depth (%u) different from config (%u)\n",
+			 fifo_depth, cqspi->fifo_depth);
+	}
 }
 
 static int cqspi_request_mmap_dma(struct cqspi_st *cqspi)
@@ -1730,6 +1749,7 @@ static int cqspi_probe(struct platform_device *pdev)
 	cqspi->pdev = pdev;
 	cqspi->host = host;
 	cqspi->is_jh7110 = false;
+	cqspi->ddata = ddata = of_device_get_match_data(dev);
 	platform_set_drvdata(pdev, cqspi);
 
 	/* Obtain configuration from OF. */
@@ -1821,8 +1841,6 @@ static int cqspi_probe(struct platform_device *pdev)
 	/* write completion is supported by default */
 	cqspi->wr_completion = true;
 
-	ddata = of_device_get_match_data(dev);
-	cqspi->ddata = ddata;
 	if (ddata) {
 		if (ddata->quirks & CQSPI_NEEDS_WR_DELAY)
 			cqspi->wr_delay = 50 * DIV_ROUND_UP(NSEC_PER_SEC,
@@ -1864,7 +1882,10 @@ static int cqspi_probe(struct platform_device *pdev)
 	}
 
 	cqspi_wait_idle(cqspi);
+	cqspi_controller_enable(cqspi, 0);
+	cqspi_controller_detect_fifo_depth(cqspi);
 	cqspi_controller_init(cqspi);
+	cqspi_controller_enable(cqspi, 1);
 	cqspi->current_cs = -1;
 	cqspi->sclk = 0;
 
@@ -1947,7 +1968,9 @@ static int cqspi_runtime_resume(struct device *dev)
 
 	clk_prepare_enable(cqspi->clk);
 	cqspi_wait_idle(cqspi);
+	cqspi_controller_enable(cqspi, 0);
 	cqspi_controller_init(cqspi);
+	cqspi_controller_enable(cqspi, 1);
 
 	cqspi->current_cs = -1;
 	cqspi->sclk = 0;

-- 
2.44.0

[PATCH v4 2/6] spi: cadence-qspi: add no-IRQ mode to indirect reads

[Théo Lebrun]

Support reads through polling, without any IRQ. The main reason is
performance; profiling shows that the first IRQ comes quickly on our
specific hardware. Once this IRQ arrives, we poll until all data is
retrieved. Avoid initial sleep to reduce IRQ count.

Hide this behavior behind a quirk flag.

This is confirmed through micro-benchmarks, but also end-to-end
performance tests. Mobileye EyeQ5, octal flash, reading 235M on a UBIFS
filesystem:
 - No optimizations, ~10.34s, ~22.7 MB/s, 199230 IRQs
 - CQSPI_SLOW_SRAM,  ~10.34s, ~22.7 MB/s,  70284 IRQs
 - CQSPI_RD_NO_IRQ,   ~9.37s, ~25.1 MB/s,    521 IRQs

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 drivers/spi/spi-cadence-quadspi.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 5a83940220a9..a82e23526a6f 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -42,6 +42,7 @@ static_assert(CQSPI_MAX_CHIPSELECT <= SPI_CS_CNT_MAX);
 #define CQSPI_NO_SUPPORT_WR_COMPLETION	BIT(3)
 #define CQSPI_SLOW_SRAM		BIT(4)
 #define CQSPI_NEEDS_APB_AHB_HAZARD_WAR	BIT(5)
+#define CQSPI_RD_NO_IRQ			BIT(6)
 
 /* Capabilities */
 #define CQSPI_SUPPORTS_OCTAL		BIT(0)
@@ -702,6 +703,7 @@ static int cqspi_indirect_read_execute(struct cqspi_flash_pdata *f_pdata,
 				       const size_t n_rx)
 {
 	struct cqspi_st *cqspi = f_pdata->cqspi;
+	bool use_irq = !(cqspi->ddata && cqspi->ddata->quirks & CQSPI_RD_NO_IRQ);
 	struct device *dev = &cqspi->pdev->dev;
 	void __iomem *reg_base = cqspi->iobase;
 	void __iomem *ahb_base = cqspi->ahb_base;
@@ -725,17 +727,20 @@ static int cqspi_indirect_read_execute(struct cqspi_flash_pdata *f_pdata,
 	 * all the read interrupts disabled for max performance.
 	 */
 
-	if (!cqspi->slow_sram)
+	if (use_irq && cqspi->slow_sram)
+		writel(CQSPI_REG_IRQ_WATERMARK, reg_base + CQSPI_REG_IRQMASK);
+	else if (use_irq)
 		writel(CQSPI_IRQ_MASK_RD, reg_base + CQSPI_REG_IRQMASK);
 	else
-		writel(CQSPI_REG_IRQ_WATERMARK, reg_base + CQSPI_REG_IRQMASK);
+		writel(0, reg_base + CQSPI_REG_IRQMASK);
 
 	reinit_completion(&cqspi->transfer_complete);
 	writel(CQSPI_REG_INDIRECTRD_START_MASK,
 	       reg_base + CQSPI_REG_INDIRECTRD);
 
 	while (remaining > 0) {
-		if (!wait_for_completion_timeout(&cqspi->transfer_complete,
+		if (use_irq &&
+		    !wait_for_completion_timeout(&cqspi->transfer_complete,
 						 msecs_to_jiffies(CQSPI_READ_TIMEOUT_MS)))
 			ret = -ETIMEDOUT;
 
@@ -777,7 +782,7 @@ static int cqspi_indirect_read_execute(struct cqspi_flash_pdata *f_pdata,
 			bytes_to_read = cqspi_get_rd_sram_level(cqspi);
 		}
 
-		if (remaining > 0) {
+		if (use_irq && remaining > 0) {
 			reinit_completion(&cqspi->transfer_complete);
 			if (cqspi->slow_sram)
 				writel(CQSPI_REG_IRQ_WATERMARK, reg_base + CQSPI_REG_IRQMASK);

-- 
2.44.0

[PATCH v4 3/6] spi: cadence-qspi: add early busywait to cqspi_wait_for_bit()

[Théo Lebrun]

Call readl_relaxed_poll_timeout() with no sleep at the start of
cqspi_wait_for_bit(). If its short timeout expires, a sleeping
readl_relaxed_poll_timeout() call takes the relay.

The reason is to avoid hrtimer interrupts on the system. All read
operations are expected to take less than 100µs.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 drivers/spi/spi-cadence-quadspi.c | 31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index a82e23526a6f..87c88ee708e4 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -120,6 +120,7 @@ struct cqspi_driver_platdata {
 /* Operation timeout value */
 #define CQSPI_TIMEOUT_MS			500
 #define CQSPI_READ_TIMEOUT_MS			10
+#define CQSPI_BUSYWAIT_TIMEOUT_US		500
 
 /* Runtime_pm autosuspend delay */
 #define CQSPI_AUTOSUSPEND_TIMEOUT		2000
@@ -298,13 +299,27 @@ struct cqspi_driver_platdata {
 
 #define CQSPI_REG_VERSAL_DMA_VAL		0x602
 
-static int cqspi_wait_for_bit(void __iomem *reg, const u32 mask, bool clr)
+static int cqspi_wait_for_bit(const struct cqspi_driver_platdata *ddata,
+			      void __iomem *reg, const u32 mask, bool clr,
+			      bool busywait)
 {
+	u64 timeout_us = CQSPI_TIMEOUT_MS * USEC_PER_MSEC;
 	u32 val;
 
+	if (busywait) {
+		int ret = readl_relaxed_poll_timeout(reg, val,
+						     (((clr ? ~val : val) & mask) == mask),
+						     0, CQSPI_BUSYWAIT_TIMEOUT_US);
+
+		if (ret != -ETIMEDOUT)
+			return ret;
+
+		timeout_us -= CQSPI_BUSYWAIT_TIMEOUT_US;
+	}
+
 	return readl_relaxed_poll_timeout(reg, val,
 					  (((clr ? ~val : val) & mask) == mask),
-					  10, CQSPI_TIMEOUT_MS * 1000);
+					  10, timeout_us);
 }
 
 static bool cqspi_is_idle(struct cqspi_st *cqspi)
@@ -434,8 +449,8 @@ static int cqspi_exec_flash_cmd(struct cqspi_st *cqspi, unsigned int reg)
 	writel(reg, reg_base + CQSPI_REG_CMDCTRL);
 
 	/* Polling for completion. */
-	ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_CMDCTRL,
-				 CQSPI_REG_CMDCTRL_INPROGRESS_MASK, 1);
+	ret = cqspi_wait_for_bit(cqspi->ddata, reg_base + CQSPI_REG_CMDCTRL,
+				 CQSPI_REG_CMDCTRL_INPROGRESS_MASK, 1, true);
 	if (ret) {
 		dev_err(&cqspi->pdev->dev,
 			"Flash command execution timed out.\n");
@@ -790,8 +805,8 @@ static int cqspi_indirect_read_execute(struct cqspi_flash_pdata *f_pdata,
 	}
 
 	/* Check indirect done status */
-	ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_INDIRECTRD,
-				 CQSPI_REG_INDIRECTRD_DONE_MASK, 0);
+	ret = cqspi_wait_for_bit(cqspi->ddata, reg_base + CQSPI_REG_INDIRECTRD,
+				 CQSPI_REG_INDIRECTRD_DONE_MASK, 0, true);
 	if (ret) {
 		dev_err(dev, "Indirect read completion error (%i)\n", ret);
 		goto failrd;
@@ -1091,8 +1106,8 @@ static int cqspi_indirect_write_execute(struct cqspi_flash_pdata *f_pdata,
 	}
 
 	/* Check indirect done status */
-	ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_INDIRECTWR,
-				 CQSPI_REG_INDIRECTWR_DONE_MASK, 0);
+	ret = cqspi_wait_for_bit(cqspi->ddata, reg_base + CQSPI_REG_INDIRECTWR,
+				 CQSPI_REG_INDIRECTWR_DONE_MASK, 0, false);
 	if (ret) {
 		dev_err(dev, "Indirect write completion error (%i)\n", ret);
 		goto failwr;

-- 
2.44.0

[PATCH v4 4/6] spi: cadence-qspi: add mobileye,eyeq5-ospi compatible

[Théo Lebrun]

Declare a new mobileye,eyeq5-ospi compatible.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 drivers/spi/spi-cadence-quadspi.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 87c88ee708e4..05ebb03d319f 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -2055,6 +2055,12 @@ static const struct cqspi_driver_platdata pensando_cdns_qspi = {
 	.quirks = CQSPI_NEEDS_APB_AHB_HAZARD_WAR | CQSPI_DISABLE_DAC_MODE,
 };
 
+static const struct cqspi_driver_platdata mobileye_eyeq5_ospi = {
+	.hwcaps_mask = CQSPI_SUPPORTS_OCTAL,
+	.quirks = CQSPI_DISABLE_DAC_MODE | CQSPI_NO_SUPPORT_WR_COMPLETION |
+			CQSPI_RD_NO_IRQ,
+};
+
 static const struct of_device_id cqspi_dt_ids[] = {
 	{
 		.compatible = "cdns,qspi-nor",
@@ -2088,6 +2094,10 @@ static const struct of_device_id cqspi_dt_ids[] = {
 		.compatible = "amd,pensando-elba-qspi",
 		.data = &pensando_cdns_qspi,
 	},
+	{
+		.compatible = "mobileye,eyeq5-ospi",
+		.data = &mobileye_eyeq5_ospi,
+	},
 	{ /* end of table */ }
 };
 

-- 
2.44.0

[PATCH v4 5/6] MIPS: mobileye: eyeq5: Add SPI-NOR controller node

[Théo Lebrun]

Add Cadence Quad SPI controller node to EyeQ5 SoC devicetree.
Octal is supported.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 arch/mips/boot/dts/mobileye/eyeq5.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index 8d4f65ec912d..1543c2b9bcb6 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -158,6 +158,21 @@ timer {
 				clocks = <&core0_clk>;
 			};
 		};
+
+		ospi: spi@2100000 {
+			compatible = "mobileye,eyeq5-ospi", "cdns,qspi-nor";
+			reg = <0 0x2100000 0x0 0x1000>,
+			      <0 0x10000000 0x0 0x8000000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks EQ5C_DIV_OSPI>;
+			assigned-clocks = <&clocks EQ5C_DIV_OSPI>;
+			assigned-clock-rates = <167000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+		};
 	};
 };
 

-- 
2.44.0

[PATCH v4 6/6] MIPS: mobileye: eyeq5: add octal flash node to eval board DTS

[Théo Lebrun]

Add SPI-NOR octal flash node to evaluation board devicetree.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
index 6898b2d8267d..0e5fee7b680c 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
+++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
@@ -21,3 +21,18 @@ memory@0 {
 		      <0x8 0x02000000 0x0 0x7E000000>;
 	};
 };
+
+&ospi {
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* chip select */
+
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <8>;
+		cdns,read-delay = <1>;
+		cdns,tshsl-ns = <400>;
+		cdns,tsd2d-ns = <400>;
+		cdns,tchsh-ns = <125>;
+		cdns,tslch-ns = <50>;
+	};
+};

-- 
2.44.0

Re: (subset) [PATCH v4 0/6] spi: cadence-qspi: add Mobileye EyeQ5 support

[Mark Brown]

On Tue, 23 Apr 2024 12:01:39 +0200, Théo Lebrun wrote:
> V4 of this series adding octal SPI-NOR support to Mobileye EyeQ5
> platform. It has been tested on EyeQ5 hardware successfully. Patches
> have been taken over time, meaning series got smaller over time.
> 
> Patches:
>  - Make cdns,fifo-depth optional by computing it from hardware.
>  - No-IRQ mode for indirect read operations. Behind a quirk flag.
>  - Busywait on commands and indirect reads; reduces hrtimeouts load.
>  - Add mobileye,eyeq5-ospi compatible.
>  - EyeQ5 devicetree:
>     - Add octal SPI-NOR node.
>     - Add SPI-NOR flash node on eval board.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/6] spi: cadence-qspi: allow FIFO depth detection
      commit: 3bf64a2b66edffd28614b004648ccd60e3139c9e
[2/6] spi: cadence-qspi: add no-IRQ mode to indirect reads
      commit: 1f257b92e6330d576cc826fb8f0b74fe0e8209de
[3/6] spi: cadence-qspi: add early busywait to cqspi_wait_for_bit()
      commit: c1887396373b8faecef61d352bd521ac66162706
[4/6] spi: cadence-qspi: add mobileye,eyeq5-ospi compatible
      commit: 47766799f546249813e97a0ccde8978ba114e89f

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark