[PATCHv3] MIPS: JZ4780: DTS: Add I2C nodes

[PATCHv3] MIPS: JZ4780: DTS: Add I2C nodes

[Alexandre GRIVEAUX]

Add the devicetree nodes for the I2C core of the JZ4780 SoC, disabled
by default.
---
 arch/mips/boot/dts/ingenic/jz4780.dtsi | 86 ++++++++++++++++++++++++++
 1 file changed, 86 insertions(+)

diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index b03cdec56de9..a76ecd69bfd0 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -239,6 +239,92 @@
 		status = "disabled";
 	};
 
+	i2c0: i2c@10050000 {
+		compatible = "ingenic,jz4780-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x10050000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <60>;
+
+		clocks = <&cgu JZ4780_CLK_SMB0>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c0_data>;
+
+		status = "disabled";
+	};
+
+	i2c1: i2c@10051000 {
+		compatible = "ingenic,jz4780-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10051000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <59>;
+
+		clocks = <&cgu JZ4780_CLK_SMB1>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c1_data>;
+
+		status = "disabled";
+	};
+
+	i2c2: i2c@10052000 {
+		compatible = "ingenic,jz4780-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10052000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <58>;
+
+		clocks = <&cgu JZ4780_CLK_SMB2>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c2_data>;
+
+		status = "disabled";
+	};
+
+	i2c3: i2c@10053000 {
+		compatible = "ingenic,jz4780-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10053000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <57>;
+
+		clocks = <&cgu JZ4780_CLK_SMB3>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c3_data>;
+
+		status = "disabled";
+	};
+
+	i2c4: i2c@10054000 {
+		compatible = "ingenic,jz4780-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10054000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <56>;
+
+		clocks = <&cgu JZ4780_CLK_SMB4>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c4_data>;
+
+		status = "disabled";
+	};
+
 	watchdog: watchdog@10002000 {
 		compatible = "ingenic,jz4780-watchdog";
 		reg = <0x10002000 0x10>;
-- 
2.20.1

Re: [PATCHv3] MIPS: JZ4780: DTS: Add I2C nodes

[Linus Torvalds]

Your patches lack a sign-off, but the reason I am emailing is that
they get marked as spam when going through the mailing list because
the DKIM is bad.

The email does have what appears to be a find DKIM signature, but it
adds _way_ too many headers to the list to be checked, including the
"Sender" line, but also things like "List-Id" etc.

Which is completely wrong usage of DKIM when you go through a mailing
list (which is _supposed_ to change the Sender field!).

It looks like somebody mis-understood what DKIM is about, and added
all the lines they could find to the list of DKIM-protected headers.

You should generally protect the minimal core required set of headers:
From/To/Date/Subject/Message-ID etc. Not the headers that are
intentionally going to be rewritten by any list you might want to post
to.

               Linus "hate spam, try to fix dkim" Torvalds

On Wed, Jul 17, 2019 at 12:20 PM Alexandre GRIVEAUX
<agriveaux@deutnet.info> wrote:
>
> Add the devicetree nodes for the I2C core of the JZ4780 SoC, disabled
> by default.
..