* MIPS: ath79: regression after patch: sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set
@ 2019-06-13 6:30 Oleksij Rempel
2019-06-13 8:08 ` Yafang Shao
0 siblings, 1 reply; 11+ messages in thread
From: Oleksij Rempel @ 2019-06-13 6:30 UTC (permalink / raw)
To: Yafang Shao; +Cc: linux-mips, kernel
Hi,
After patch:
-----------------------------------------------------
commit 2a09b5de235a6b5f76193a2ed46546a2944f98bf
Author: Yafang Shao <laoar.shao@gmail.com>
Date: Tue Mar 26 20:13:10 2019 +0800
sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set
The tracepoints trace_sched_stat_{iowait, blocked, wait, sleep} should
be not exposed to user if CONFIG_SCHEDSTATS is not set.
Link: http://lkml.kernel.org/r/1553602391-11926-3-git-send-email-laoar.shao@gmail.com
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----------------------------------------------------
i can't boot kernel on MIPS based system Atheros ar9331. The boot
process ends with following oops:
-----------------------------------------------------
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [0/1518]
[ 0.000000] Kernel command line: ip=dhcp root=/dev/nfs nfsroot=192.168.23.4:/home/ore/nfsroot/dpt-module,v3,tcp
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 56376K/65536K available (5376K kernel code, 437K rwdata, 1068K rodata, 1432K init, 214K bss, 9160K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u32 called from cache_random_seq_create+0x9c/0x170 with crng_init=0
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 18167 entries in 36 pages
[ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 00000000
[ 0.000000] Oops[#1]:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc4+ #308
[ 0.000000] $ 0 : 00000000 8007e5fc 00000003 00000002
[ 0.000000] $ 4 : 00000001 00000000 00000000 83c22470
[ 0.000000] $ 8 : 00000000 00000000 00000000 00000000
[ 0.000000] $12 : 806afe04 00000000 00000001 00000000
[ 0.000000] $16 : 800adc0c 800adc00 00000000 00000000
[ 0.000000] $20 : 00000000 0000048e 00000000 806c0000
[ 0.000000] $24 : 00000003 800619e4
[ 0.000000] $28 : 806ae000 806afe10 808b0000 00000000
[ 0.000000] Hi : 00000000
[ 0.000000] Lo : 00000000
[ 0.000000] epc : 00000000 0x0
[ 0.000000] ra : 00000000 0x0
[ 0.000000] Status: 10000002 KERNEL EXL
[ 0.000000] Cause : 10800008 (ExcCode 02)
[ 0.000000] BadVA : 00000000
[ 0.000000] PrId : 00019374 (MIPS 24Kc)
[ 0.000000] Modules linked in:
[ 0.000000] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000)
[ 0.000000] Stack : 00000002 8007e784 806ca284 00000000 800adc0c 00000000 80070eb0 8007108c
[ 0.000000] 83c03c00 801ab7d8 83c03b80 00000000 00000000 83c03b80 00000000 801109cc
[ 0.000000] 00000001 80880000 80880000 800c1318 00000000 ffffffff 806b0000 806b0000
[ 0.000000] 83c22470 0000048e 8075eb00 807706dc 806b0000 80753158 806b0000 80755209
[ 0.000000] 00000001 80880000 80880000 80726cc8 ffffffff 000046f7 00000024 00000003
[ 0.000000] ...
[ 0.000000] Call Trace:
[ 0.000000]
[ 0.000000] [<8007e784>] r4k_flush_icache_range+0x10/0x18
[ 0.000000] [<800adc0c>] preempt_count_sub+0x10/0xe4
[ 0.000000] [<80070eb0>] ftrace_caller+0x0/0x54
[ 0.000000] [<8007108c>] ftrace_make_nop+0x8c/0x94
[ 0.000000] [<801ab7d8>] __get_free_pages+0x2c/0x60
[ 0.000000] [<801109cc>] ftrace_process_locs+0x364/0x3ec
[ 0.000000] [<800c1318>] vprintk_default+0x34/0x40
[ 0.000000] [<80726cc8>] ftrace_init+0xb8/0x138
[ 0.000000] [<8071ac98>] start_kernel+0x290/0x584
[ 0.000000] [<8071a368>] unknown_bootoption+0x0/0x270
[ 0.000000]
[ 0.000000] Code: (Bad address in epc)
[ 0.000000]
[ 0.000000] ---[ end trace 64e6fa591c4a277c ]---
[ 0.000000] Kernel panic - not syncing: Fatal exception
[ 0.000000] Rebooting in
-----------------------------------------------------
After reverting this patch I can normally boot the kernel.
The kernel is build with CONFIG_SCHEDSTATS not set.
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: MIPS: ath79: regression after patch: sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set 2019-06-13 6:30 MIPS: ath79: regression after patch: sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set Oleksij Rempel @ 2019-06-13 8:08 ` Yafang Shao 2019-06-13 8:12 ` Yafang Shao 0 siblings, 1 reply; 11+ messages in thread From: Yafang Shao @ 2019-06-13 8:08 UTC (permalink / raw) To: Oleksij Rempel; +Cc: linux-mips, kernel On Thu, Jun 13, 2019 at 2:30 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > Hi, > > After patch: > ----------------------------------------------------- > commit 2a09b5de235a6b5f76193a2ed46546a2944f98bf > Author: Yafang Shao <laoar.shao@gmail.com> > Date: Tue Mar 26 20:13:10 2019 +0800 > sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set > > The tracepoints trace_sched_stat_{iowait, blocked, wait, sleep} should > be not exposed to user if CONFIG_SCHEDSTATS is not set. > > Link: http://lkml.kernel.org/r/1553602391-11926-3-git-send-email-laoar.shao@gmail.com > > Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> > Signed-off-by: Yafang Shao <laoar.shao@gmail.com> > Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> > ----------------------------------------------------- > > i can't boot kernel on MIPS based system Atheros ar9331. The boot > process ends with following oops: > ----------------------------------------------------- > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [0/1518] > [ 0.000000] Kernel command line: ip=dhcp root=/dev/nfs nfsroot=192.168.23.4:/home/ore/nfsroot/dpt-module,v3,tcp > [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > [ 0.000000] Writing ErrCtl register=00000000 > [ 0.000000] Readback ErrCtl register=00000000 > [ 0.000000] Memory: 56376K/65536K available (5376K kernel code, 437K rwdata, 1068K rodata, 1432K init, 214K bss, 9160K reserved, 0K cma-reserved) > [ 0.000000] random: get_random_u32 called from cache_random_seq_create+0x9c/0x170 with crng_init=0 > [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > [ 0.000000] ftrace: allocating 18167 entries in 36 pages > [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 00000000 > [ 0.000000] Oops[#1]: > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc4+ #308 > [ 0.000000] $ 0 : 00000000 8007e5fc 00000003 00000002 > [ 0.000000] $ 4 : 00000001 00000000 00000000 83c22470 > [ 0.000000] $ 8 : 00000000 00000000 00000000 00000000 > [ 0.000000] $12 : 806afe04 00000000 00000001 00000000 > [ 0.000000] $16 : 800adc0c 800adc00 00000000 00000000 > [ 0.000000] $20 : 00000000 0000048e 00000000 806c0000 > [ 0.000000] $24 : 00000003 800619e4 > [ 0.000000] $28 : 806ae000 806afe10 808b0000 00000000 > [ 0.000000] Hi : 00000000 > [ 0.000000] Lo : 00000000 > [ 0.000000] epc : 00000000 0x0 > [ 0.000000] ra : 00000000 0x0 > [ 0.000000] Status: 10000002 KERNEL EXL > [ 0.000000] Cause : 10800008 (ExcCode 02) > [ 0.000000] BadVA : 00000000 > [ 0.000000] PrId : 00019374 (MIPS 24Kc) > [ 0.000000] Modules linked in: > [ 0.000000] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000) > [ 0.000000] Stack : 00000002 8007e784 806ca284 00000000 800adc0c 00000000 80070eb0 8007108c > [ 0.000000] 83c03c00 801ab7d8 83c03b80 00000000 00000000 83c03b80 00000000 801109cc > [ 0.000000] 00000001 80880000 80880000 800c1318 00000000 ffffffff 806b0000 806b0000 > [ 0.000000] 83c22470 0000048e 8075eb00 807706dc 806b0000 80753158 806b0000 80755209 > [ 0.000000] 00000001 80880000 80880000 80726cc8 ffffffff 000046f7 00000024 00000003 > [ 0.000000] ... > [ 0.000000] Call Trace: > [ 0.000000] > [ 0.000000] [<8007e784>] r4k_flush_icache_range+0x10/0x18 > [ 0.000000] [<800adc0c>] preempt_count_sub+0x10/0xe4 > [ 0.000000] [<80070eb0>] ftrace_caller+0x0/0x54 > [ 0.000000] [<8007108c>] ftrace_make_nop+0x8c/0x94 > [ 0.000000] [<801ab7d8>] __get_free_pages+0x2c/0x60 > [ 0.000000] [<801109cc>] ftrace_process_locs+0x364/0x3ec > [ 0.000000] [<800c1318>] vprintk_default+0x34/0x40 > [ 0.000000] [<80726cc8>] ftrace_init+0xb8/0x138 > [ 0.000000] [<8071ac98>] start_kernel+0x290/0x584 > [ 0.000000] [<8071a368>] unknown_bootoption+0x0/0x270 > [ 0.000000] > [ 0.000000] Code: (Bad address in epc) > [ 0.000000] > [ 0.000000] ---[ end trace 64e6fa591c4a277c ]--- > [ 0.000000] Kernel panic - not syncing: Fatal exception > [ 0.000000] Rebooting in > ----------------------------------------------------- > > After reverting this patch I can normally boot the kernel. > The kernel is build with CONFIG_SCHEDSTATS not set. > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | Hi Oleksij, This really makes me confused. If CONFIG_SCHEDSTATS is not set, trace_sched_stat_{iowait, blocked, wait, sleep} will be optimized out by the compiler. That should not effect other codes. Would you pls. try bellow command on your build server? $ objdump -dr kernel/sched/fair.o | awk '/>:$/ { F=$2 } /sched_stat/ { print F " " $0 }' Thanks Yafang ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: MIPS: ath79: regression after patch: sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set 2019-06-13 8:08 ` Yafang Shao @ 2019-06-13 8:12 ` Yafang Shao [not found] ` <20190613160214.7df3tnfgtexvdy3y@pengutronix.de> 0 siblings, 1 reply; 11+ messages in thread From: Yafang Shao @ 2019-06-13 8:12 UTC (permalink / raw) To: Oleksij Rempel; +Cc: linux-mips, kernel On Thu, Jun 13, 2019 at 4:08 PM Yafang Shao <laoar.shao@gmail.com> wrote: > > On Thu, Jun 13, 2019 at 2:30 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > Hi, > > > > After patch: > > ----------------------------------------------------- > > commit 2a09b5de235a6b5f76193a2ed46546a2944f98bf > > Author: Yafang Shao <laoar.shao@gmail.com> > > Date: Tue Mar 26 20:13:10 2019 +0800 > > sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set > > > > The tracepoints trace_sched_stat_{iowait, blocked, wait, sleep} should > > be not exposed to user if CONFIG_SCHEDSTATS is not set. > > > > Link: http://lkml.kernel.org/r/1553602391-11926-3-git-send-email-laoar.shao@gmail.com > > > > Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > Signed-off-by: Yafang Shao <laoar.shao@gmail.com> > > Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> > > ----------------------------------------------------- > > > > i can't boot kernel on MIPS based system Atheros ar9331. The boot > > process ends with following oops: > > ----------------------------------------------------- > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [0/1518] > > [ 0.000000] Kernel command line: ip=dhcp root=/dev/nfs nfsroot=192.168.23.4:/home/ore/nfsroot/dpt-module,v3,tcp > > [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > > [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > > [ 0.000000] Writing ErrCtl register=00000000 > > [ 0.000000] Readback ErrCtl register=00000000 > > [ 0.000000] Memory: 56376K/65536K available (5376K kernel code, 437K rwdata, 1068K rodata, 1432K init, 214K bss, 9160K reserved, 0K cma-reserved) > > [ 0.000000] random: get_random_u32 called from cache_random_seq_create+0x9c/0x170 with crng_init=0 > > [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > [ 0.000000] ftrace: allocating 18167 entries in 36 pages > > [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 00000000 > > [ 0.000000] Oops[#1]: > > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc4+ #308 > > [ 0.000000] $ 0 : 00000000 8007e5fc 00000003 00000002 > > [ 0.000000] $ 4 : 00000001 00000000 00000000 83c22470 > > [ 0.000000] $ 8 : 00000000 00000000 00000000 00000000 > > [ 0.000000] $12 : 806afe04 00000000 00000001 00000000 > > [ 0.000000] $16 : 800adc0c 800adc00 00000000 00000000 > > [ 0.000000] $20 : 00000000 0000048e 00000000 806c0000 > > [ 0.000000] $24 : 00000003 800619e4 > > [ 0.000000] $28 : 806ae000 806afe10 808b0000 00000000 > > [ 0.000000] Hi : 00000000 > > [ 0.000000] Lo : 00000000 > > [ 0.000000] epc : 00000000 0x0 > > [ 0.000000] ra : 00000000 0x0 > > [ 0.000000] Status: 10000002 KERNEL EXL > > [ 0.000000] Cause : 10800008 (ExcCode 02) > > [ 0.000000] BadVA : 00000000 > > [ 0.000000] PrId : 00019374 (MIPS 24Kc) > > [ 0.000000] Modules linked in: > > [ 0.000000] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000) > > [ 0.000000] Stack : 00000002 8007e784 806ca284 00000000 800adc0c 00000000 80070eb0 8007108c > > [ 0.000000] 83c03c00 801ab7d8 83c03b80 00000000 00000000 83c03b80 00000000 801109cc > > [ 0.000000] 00000001 80880000 80880000 800c1318 00000000 ffffffff 806b0000 806b0000 > > [ 0.000000] 83c22470 0000048e 8075eb00 807706dc 806b0000 80753158 806b0000 80755209 > > [ 0.000000] 00000001 80880000 80880000 80726cc8 ffffffff 000046f7 00000024 00000003 > > [ 0.000000] ... > > [ 0.000000] Call Trace: > > [ 0.000000] > > [ 0.000000] [<8007e784>] r4k_flush_icache_range+0x10/0x18 > > [ 0.000000] [<800adc0c>] preempt_count_sub+0x10/0xe4 > > [ 0.000000] [<80070eb0>] ftrace_caller+0x0/0x54 > > [ 0.000000] [<8007108c>] ftrace_make_nop+0x8c/0x94 > > [ 0.000000] [<801ab7d8>] __get_free_pages+0x2c/0x60 > > [ 0.000000] [<801109cc>] ftrace_process_locs+0x364/0x3ec > > [ 0.000000] [<800c1318>] vprintk_default+0x34/0x40 > > [ 0.000000] [<80726cc8>] ftrace_init+0xb8/0x138 > > [ 0.000000] [<8071ac98>] start_kernel+0x290/0x584 > > [ 0.000000] [<8071a368>] unknown_bootoption+0x0/0x270 > > [ 0.000000] > > [ 0.000000] Code: (Bad address in epc) > > [ 0.000000] > > [ 0.000000] ---[ end trace 64e6fa591c4a277c ]--- > > [ 0.000000] Kernel panic - not syncing: Fatal exception > > [ 0.000000] Rebooting in > > ----------------------------------------------------- > > > > After reverting this patch I can normally boot the kernel. > > The kernel is build with CONFIG_SCHEDSTATS not set. > > > > -- > > Pengutronix e.K. | | > > Industrial Linux Solutions | http://www.pengutronix.de/ | > > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > Hi Oleksij, > > This really makes me confused. > If CONFIG_SCHEDSTATS is not set, trace_sched_stat_{iowait, blocked, > wait, sleep} will be optimized out by > the compiler. That should not effect other codes. > > Would you pls. try bellow command on your build server? > $ objdump -dr kernel/sched/fair.o | awk '/>:$/ { F=$2 } /sched_stat/ { > print F " " $0 }' > Plus, could you pls. show me the difference on the objdump of these two vmlinux (with and without my patch) ? Thanks Yafang ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <20190613160214.7df3tnfgtexvdy3y@pengutronix.de>]
* Re: MIPS: ath79: regression after patch: sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set [not found] ` <20190613160214.7df3tnfgtexvdy3y@pengutronix.de> @ 2019-06-14 5:56 ` Yafang Shao [not found] ` <20190614083419.stgronjpyglnxjbo@pengutronix.de> 0 siblings, 1 reply; 11+ messages in thread From: Yafang Shao @ 2019-06-14 5:56 UTC (permalink / raw) To: Oleksij Rempel; +Cc: linux-mips, kernel On Fri, Jun 14, 2019 at 12:02 AM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > On Thu, Jun 13, 2019 at 04:12:57PM +0800, Yafang Shao wrote: > > On Thu, Jun 13, 2019 at 4:08 PM Yafang Shao <laoar.shao@gmail.com> wrote: > > > > > > On Thu, Jun 13, 2019 at 2:30 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > Hi, > > > > > > > > After patch: > > > > ----------------------------------------------------- > > > > commit 2a09b5de235a6b5f76193a2ed46546a2944f98bf > > > > Author: Yafang Shao <laoar.shao@gmail.com> > > > > Date: Tue Mar 26 20:13:10 2019 +0800 > > > > sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set > > > > > > > > The tracepoints trace_sched_stat_{iowait, blocked, wait, sleep} should > > > > be not exposed to user if CONFIG_SCHEDSTATS is not set. > > > > > > > > Link: http://lkml.kernel.org/r/1553602391-11926-3-git-send-email-laoar.shao@gmail.com > > > > > > > > Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > > Signed-off-by: Yafang Shao <laoar.shao@gmail.com> > > > > Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> > > > > ----------------------------------------------------- > > > > > > > > i can't boot kernel on MIPS based system Atheros ar9331. The boot > > > > process ends with following oops: > > > > ----------------------------------------------------- > > > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [0/1518] > > > > [ 0.000000] Kernel command line: ip=dhcp root=/dev/nfs nfsroot=192.168.23.4:/home/ore/nfsroot/dpt-module,v3,tcp > > > > [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > > > > [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > > > > [ 0.000000] Writing ErrCtl register=00000000 > > > > [ 0.000000] Readback ErrCtl register=00000000 > > > > [ 0.000000] Memory: 56376K/65536K available (5376K kernel code, 437K rwdata, 1068K rodata, 1432K init, 214K bss, 9160K reserved, 0K cma-reserved) > > > > [ 0.000000] random: get_random_u32 called from cache_random_seq_create+0x9c/0x170 with crng_init=0 > > > > [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > > > [ 0.000000] ftrace: allocating 18167 entries in 36 pages > > > > [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 00000000 > > > > [ 0.000000] Oops[#1]: > > > > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc4+ #308 > > > > [ 0.000000] $ 0 : 00000000 8007e5fc 00000003 00000002 > > > > [ 0.000000] $ 4 : 00000001 00000000 00000000 83c22470 > > > > [ 0.000000] $ 8 : 00000000 00000000 00000000 00000000 > > > > [ 0.000000] $12 : 806afe04 00000000 00000001 00000000 > > > > [ 0.000000] $16 : 800adc0c 800adc00 00000000 00000000 > > > > [ 0.000000] $20 : 00000000 0000048e 00000000 806c0000 > > > > [ 0.000000] $24 : 00000003 800619e4 > > > > [ 0.000000] $28 : 806ae000 806afe10 808b0000 00000000 > > > > [ 0.000000] Hi : 00000000 > > > > [ 0.000000] Lo : 00000000 > > > > [ 0.000000] epc : 00000000 0x0 > > > > [ 0.000000] ra : 00000000 0x0 > > > > [ 0.000000] Status: 10000002 KERNEL EXL > > > > [ 0.000000] Cause : 10800008 (ExcCode 02) > > > > [ 0.000000] BadVA : 00000000 > > > > [ 0.000000] PrId : 00019374 (MIPS 24Kc) > > > > [ 0.000000] Modules linked in: > > > > [ 0.000000] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000) > > > > [ 0.000000] Stack : 00000002 8007e784 806ca284 00000000 800adc0c 00000000 80070eb0 8007108c > > > > [ 0.000000] 83c03c00 801ab7d8 83c03b80 00000000 00000000 83c03b80 00000000 801109cc > > > > [ 0.000000] 00000001 80880000 80880000 800c1318 00000000 ffffffff 806b0000 806b0000 > > > > [ 0.000000] 83c22470 0000048e 8075eb00 807706dc 806b0000 80753158 806b0000 80755209 > > > > [ 0.000000] 00000001 80880000 80880000 80726cc8 ffffffff 000046f7 00000024 00000003 > > > > [ 0.000000] ... > > > > [ 0.000000] Call Trace: > > > > [ 0.000000] > > > > [ 0.000000] [<8007e784>] r4k_flush_icache_range+0x10/0x18 > > > > [ 0.000000] [<800adc0c>] preempt_count_sub+0x10/0xe4 > > > > [ 0.000000] [<80070eb0>] ftrace_caller+0x0/0x54 > > > > [ 0.000000] [<8007108c>] ftrace_make_nop+0x8c/0x94 > > > > [ 0.000000] [<801ab7d8>] __get_free_pages+0x2c/0x60 > > > > [ 0.000000] [<801109cc>] ftrace_process_locs+0x364/0x3ec > > > > [ 0.000000] [<800c1318>] vprintk_default+0x34/0x40 > > > > [ 0.000000] [<80726cc8>] ftrace_init+0xb8/0x138 > > > > [ 0.000000] [<8071ac98>] start_kernel+0x290/0x584 > > > > [ 0.000000] [<8071a368>] unknown_bootoption+0x0/0x270 > > > > [ 0.000000] > > > > [ 0.000000] Code: (Bad address in epc) > > > > [ 0.000000] > > > > [ 0.000000] ---[ end trace 64e6fa591c4a277c ]--- > > > > [ 0.000000] Kernel panic - not syncing: Fatal exception > > > > [ 0.000000] Rebooting in > > > > ----------------------------------------------------- > > > > > > > > After reverting this patch I can normally boot the kernel. > > > > The kernel is build with CONFIG_SCHEDSTATS not set. > > > > > > > > -- > > > > Pengutronix e.K. | | > > > > Industrial Linux Solutions | http://www.pengutronix.de/ | > > > > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > > > > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > > > > > Hi Oleksij, > > > > > > This really makes me confused. > > > If CONFIG_SCHEDSTATS is not set, trace_sched_stat_{iowait, blocked, > > > wait, sleep} will be optimized out by > > > the compiler. That should not effect other codes. > > > > > > Would you pls. try bellow command on your build server? > > > $ objdump -dr kernel/sched/fair.o | awk '/>:$/ { F=$2 } /sched_stat/ { > > > print F " " $0 }' > > > > > > > Plus, could you pls. show me the difference on the objdump of these > > two vmlinux (with and without my patch) ? > > Both files are in attachment. > Hi Oleksij, Unfortunately I don't have a mips toolchain on hand. It would be better if you could give me the disassembled code of these two vmlinuxs. I will try to build a cross toolchain for MIPS 24Kc, that may take some time. Thanks Yafang ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <20190614083419.stgronjpyglnxjbo@pengutronix.de>]
* Re: MIPS: ath79: regression after patch: sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set [not found] ` <20190614083419.stgronjpyglnxjbo@pengutronix.de> @ 2019-06-17 2:04 ` Yafang Shao 2019-06-17 5:39 ` Oleksij Rempel 2019-06-26 12:37 ` Steven Rostedt 0 siblings, 2 replies; 11+ messages in thread From: Yafang Shao @ 2019-06-17 2:04 UTC (permalink / raw) To: Oleksij Rempel, Steven Rostedt; +Cc: linux-mips, kernel On Fri, Jun 14, 2019 at 4:34 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > On Fri, Jun 14, 2019 at 01:56:04PM +0800, Yafang Shao wrote: > > On Fri, Jun 14, 2019 at 12:02 AM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > On Thu, Jun 13, 2019 at 04:12:57PM +0800, Yafang Shao wrote: > > > > On Thu, Jun 13, 2019 at 4:08 PM Yafang Shao <laoar.shao@gmail.com> wrote: > > > > > > > > > > On Thu, Jun 13, 2019 at 2:30 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > > > > > Hi, > > > > > > > > > > > > After patch: > > > > > > ----------------------------------------------------- > > > > > > commit 2a09b5de235a6b5f76193a2ed46546a2944f98bf > > > > > > Author: Yafang Shao <laoar.shao@gmail.com> > > > > > > Date: Tue Mar 26 20:13:10 2019 +0800 > > > > > > sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set > > > > > > > > > > > > The tracepoints trace_sched_stat_{iowait, blocked, wait, sleep} should > > > > > > be not exposed to user if CONFIG_SCHEDSTATS is not set. > > > > > > > > > > > > Link: http://lkml.kernel.org/r/1553602391-11926-3-git-send-email-laoar.shao@gmail.com > > > > > > > > > > > > Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > > > > Signed-off-by: Yafang Shao <laoar.shao@gmail.com> > > > > > > Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> > > > > > > ----------------------------------------------------- > > > > > > > > > > > > i can't boot kernel on MIPS based system Atheros ar9331. The boot > > > > > > process ends with following oops: > > > > > > ----------------------------------------------------- > > > > > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [0/1518] > > > > > > [ 0.000000] Kernel command line: ip=dhcp root=/dev/nfs nfsroot=192.168.23.4:/home/ore/nfsroot/dpt-module,v3,tcp > > > > > > [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > > > > > > [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > > > > > > [ 0.000000] Writing ErrCtl register=00000000 > > > > > > [ 0.000000] Readback ErrCtl register=00000000 > > > > > > [ 0.000000] Memory: 56376K/65536K available (5376K kernel code, 437K rwdata, 1068K rodata, 1432K init, 214K bss, 9160K reserved, 0K cma-reserved) > > > > > > [ 0.000000] random: get_random_u32 called from cache_random_seq_create+0x9c/0x170 with crng_init=0 > > > > > > [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > > > > > [ 0.000000] ftrace: allocating 18167 entries in 36 pages > > > > > > [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 00000000 > > > > > > [ 0.000000] Oops[#1]: > > > > > > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc4+ #308 > > > > > > [ 0.000000] $ 0 : 00000000 8007e5fc 00000003 00000002 > > > > > > [ 0.000000] $ 4 : 00000001 00000000 00000000 83c22470 > > > > > > [ 0.000000] $ 8 : 00000000 00000000 00000000 00000000 > > > > > > [ 0.000000] $12 : 806afe04 00000000 00000001 00000000 > > > > > > [ 0.000000] $16 : 800adc0c 800adc00 00000000 00000000 > > > > > > [ 0.000000] $20 : 00000000 0000048e 00000000 806c0000 > > > > > > [ 0.000000] $24 : 00000003 800619e4 > > > > > > [ 0.000000] $28 : 806ae000 806afe10 808b0000 00000000 > > > > > > [ 0.000000] Hi : 00000000 > > > > > > [ 0.000000] Lo : 00000000 > > > > > > [ 0.000000] epc : 00000000 0x0 > > > > > > [ 0.000000] ra : 00000000 0x0 > > > > > > [ 0.000000] Status: 10000002 KERNEL EXL > > > > > > [ 0.000000] Cause : 10800008 (ExcCode 02) > > > > > > [ 0.000000] BadVA : 00000000 > > > > > > [ 0.000000] PrId : 00019374 (MIPS 24Kc) > > > > > > [ 0.000000] Modules linked in: > > > > > > [ 0.000000] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000) > > > > > > [ 0.000000] Stack : 00000002 8007e784 806ca284 00000000 800adc0c 00000000 80070eb0 8007108c > > > > > > [ 0.000000] 83c03c00 801ab7d8 83c03b80 00000000 00000000 83c03b80 00000000 801109cc > > > > > > [ 0.000000] 00000001 80880000 80880000 800c1318 00000000 ffffffff 806b0000 806b0000 > > > > > > [ 0.000000] 83c22470 0000048e 8075eb00 807706dc 806b0000 80753158 806b0000 80755209 > > > > > > [ 0.000000] 00000001 80880000 80880000 80726cc8 ffffffff 000046f7 00000024 00000003 > > > > > > [ 0.000000] ... > > > > > > [ 0.000000] Call Trace: > > > > > > [ 0.000000] > > > > > > [ 0.000000] [<8007e784>] r4k_flush_icache_range+0x10/0x18 > > > > > > [ 0.000000] [<800adc0c>] preempt_count_sub+0x10/0xe4 > > > > > > [ 0.000000] [<80070eb0>] ftrace_caller+0x0/0x54 > > > > > > [ 0.000000] [<8007108c>] ftrace_make_nop+0x8c/0x94 > > > > > > [ 0.000000] [<801ab7d8>] __get_free_pages+0x2c/0x60 > > > > > > [ 0.000000] [<801109cc>] ftrace_process_locs+0x364/0x3ec > > > > > > [ 0.000000] [<800c1318>] vprintk_default+0x34/0x40 > > > > > > [ 0.000000] [<80726cc8>] ftrace_init+0xb8/0x138 > > > > > > [ 0.000000] [<8071ac98>] start_kernel+0x290/0x584 > > > > > > [ 0.000000] [<8071a368>] unknown_bootoption+0x0/0x270 > > > > > > [ 0.000000] > > > > > > [ 0.000000] Code: (Bad address in epc) > > > > > > [ 0.000000] > > > > > > [ 0.000000] ---[ end trace 64e6fa591c4a277c ]--- > > > > > > [ 0.000000] Kernel panic - not syncing: Fatal exception > > > > > > [ 0.000000] Rebooting in > > > > > > ----------------------------------------------------- > > > > > > > > > > > > After reverting this patch I can normally boot the kernel. > > > > > > The kernel is build with CONFIG_SCHEDSTATS not set. > > > > > > > > > > > > -- > > > > > > Pengutronix e.K. | | > > > > > > Industrial Linux Solutions | http://www.pengutronix.de/ | > > > > > > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > > > > > > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > > > > > > > > > Hi Oleksij, > > > > > > > > > > This really makes me confused. > > > > > If CONFIG_SCHEDSTATS is not set, trace_sched_stat_{iowait, blocked, > > > > > wait, sleep} will be optimized out by > > > > > the compiler. That should not effect other codes. > > > > > > > > > > Would you pls. try bellow command on your build server? > > > > > $ objdump -dr kernel/sched/fair.o | awk '/>:$/ { F=$2 } /sched_stat/ { > > > > > print F " " $0 }' > > > > > > > > > > > > > Plus, could you pls. show me the difference on the objdump of these > > > > two vmlinux (with and without my patch) ? > > > > > > Both files are in attachment. > > > > > > > Hi Oleksij, > > > > Unfortunately I don't have a mips toolchain on hand. > > It would be better if you could give me the disassembled code of > > these two vmlinuxs. > > I will try to build a cross toolchain for MIPS 24Kc, that may take some time. > > disassembled code is in attachment. > > -- + Steve, Hi Oleksij, I guess this issue is related with __mcount_loc, but I don't have a clear idea how to fix it yet. It would be better if you could share your .config file as well. Hi Steve, Do you have any suggestion on this issue? My guess is when we define a tracepoint as nop, there's something wrong in __mcount_loc, which will be used by MIPS and then this oops occurs. Thanks Yafang ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: MIPS: ath79: regression after patch: sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set 2019-06-17 2:04 ` Yafang Shao @ 2019-06-17 5:39 ` Oleksij Rempel 2019-06-17 13:01 ` Yafang Shao 2019-06-26 12:37 ` Steven Rostedt 1 sibling, 1 reply; 11+ messages in thread From: Oleksij Rempel @ 2019-06-17 5:39 UTC (permalink / raw) To: Yafang Shao; +Cc: Steven Rostedt, linux-mips, kernel [-- Attachment #1: Type: text/plain, Size: 8261 bytes --] On Mon, Jun 17, 2019 at 10:04:46AM +0800, Yafang Shao wrote: > On Fri, Jun 14, 2019 at 4:34 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > On Fri, Jun 14, 2019 at 01:56:04PM +0800, Yafang Shao wrote: > > > On Fri, Jun 14, 2019 at 12:02 AM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > On Thu, Jun 13, 2019 at 04:12:57PM +0800, Yafang Shao wrote: > > > > > On Thu, Jun 13, 2019 at 4:08 PM Yafang Shao <laoar.shao@gmail.com> wrote: > > > > > > > > > > > > On Thu, Jun 13, 2019 at 2:30 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > After patch: > > > > > > > ----------------------------------------------------- > > > > > > > commit 2a09b5de235a6b5f76193a2ed46546a2944f98bf > > > > > > > Author: Yafang Shao <laoar.shao@gmail.com> > > > > > > > Date: Tue Mar 26 20:13:10 2019 +0800 > > > > > > > sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set > > > > > > > > > > > > > > The tracepoints trace_sched_stat_{iowait, blocked, wait, sleep} should > > > > > > > be not exposed to user if CONFIG_SCHEDSTATS is not set. > > > > > > > > > > > > > > Link: http://lkml.kernel.org/r/1553602391-11926-3-git-send-email-laoar.shao@gmail.com > > > > > > > > > > > > > > Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > > > > > Signed-off-by: Yafang Shao <laoar.shao@gmail.com> > > > > > > > Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> > > > > > > > ----------------------------------------------------- > > > > > > > > > > > > > > i can't boot kernel on MIPS based system Atheros ar9331. The boot > > > > > > > process ends with following oops: > > > > > > > ----------------------------------------------------- > > > > > > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [0/1518] > > > > > > > [ 0.000000] Kernel command line: ip=dhcp root=/dev/nfs nfsroot=192.168.23.4:/home/ore/nfsroot/dpt-module,v3,tcp > > > > > > > [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > > > > > > > [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > > > > > > > [ 0.000000] Writing ErrCtl register=00000000 > > > > > > > [ 0.000000] Readback ErrCtl register=00000000 > > > > > > > [ 0.000000] Memory: 56376K/65536K available (5376K kernel code, 437K rwdata, 1068K rodata, 1432K init, 214K bss, 9160K reserved, 0K cma-reserved) > > > > > > > [ 0.000000] random: get_random_u32 called from cache_random_seq_create+0x9c/0x170 with crng_init=0 > > > > > > > [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > > > > > > [ 0.000000] ftrace: allocating 18167 entries in 36 pages > > > > > > > [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 00000000 > > > > > > > [ 0.000000] Oops[#1]: > > > > > > > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc4+ #308 > > > > > > > [ 0.000000] $ 0 : 00000000 8007e5fc 00000003 00000002 > > > > > > > [ 0.000000] $ 4 : 00000001 00000000 00000000 83c22470 > > > > > > > [ 0.000000] $ 8 : 00000000 00000000 00000000 00000000 > > > > > > > [ 0.000000] $12 : 806afe04 00000000 00000001 00000000 > > > > > > > [ 0.000000] $16 : 800adc0c 800adc00 00000000 00000000 > > > > > > > [ 0.000000] $20 : 00000000 0000048e 00000000 806c0000 > > > > > > > [ 0.000000] $24 : 00000003 800619e4 > > > > > > > [ 0.000000] $28 : 806ae000 806afe10 808b0000 00000000 > > > > > > > [ 0.000000] Hi : 00000000 > > > > > > > [ 0.000000] Lo : 00000000 > > > > > > > [ 0.000000] epc : 00000000 0x0 > > > > > > > [ 0.000000] ra : 00000000 0x0 > > > > > > > [ 0.000000] Status: 10000002 KERNEL EXL > > > > > > > [ 0.000000] Cause : 10800008 (ExcCode 02) > > > > > > > [ 0.000000] BadVA : 00000000 > > > > > > > [ 0.000000] PrId : 00019374 (MIPS 24Kc) > > > > > > > [ 0.000000] Modules linked in: > > > > > > > [ 0.000000] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000) > > > > > > > [ 0.000000] Stack : 00000002 8007e784 806ca284 00000000 800adc0c 00000000 80070eb0 8007108c > > > > > > > [ 0.000000] 83c03c00 801ab7d8 83c03b80 00000000 00000000 83c03b80 00000000 801109cc > > > > > > > [ 0.000000] 00000001 80880000 80880000 800c1318 00000000 ffffffff 806b0000 806b0000 > > > > > > > [ 0.000000] 83c22470 0000048e 8075eb00 807706dc 806b0000 80753158 806b0000 80755209 > > > > > > > [ 0.000000] 00000001 80880000 80880000 80726cc8 ffffffff 000046f7 00000024 00000003 > > > > > > > [ 0.000000] ... > > > > > > > [ 0.000000] Call Trace: > > > > > > > [ 0.000000] > > > > > > > [ 0.000000] [<8007e784>] r4k_flush_icache_range+0x10/0x18 > > > > > > > [ 0.000000] [<800adc0c>] preempt_count_sub+0x10/0xe4 > > > > > > > [ 0.000000] [<80070eb0>] ftrace_caller+0x0/0x54 > > > > > > > [ 0.000000] [<8007108c>] ftrace_make_nop+0x8c/0x94 > > > > > > > [ 0.000000] [<801ab7d8>] __get_free_pages+0x2c/0x60 > > > > > > > [ 0.000000] [<801109cc>] ftrace_process_locs+0x364/0x3ec > > > > > > > [ 0.000000] [<800c1318>] vprintk_default+0x34/0x40 > > > > > > > [ 0.000000] [<80726cc8>] ftrace_init+0xb8/0x138 > > > > > > > [ 0.000000] [<8071ac98>] start_kernel+0x290/0x584 > > > > > > > [ 0.000000] [<8071a368>] unknown_bootoption+0x0/0x270 > > > > > > > [ 0.000000] > > > > > > > [ 0.000000] Code: (Bad address in epc) > > > > > > > [ 0.000000] > > > > > > > [ 0.000000] ---[ end trace 64e6fa591c4a277c ]--- > > > > > > > [ 0.000000] Kernel panic - not syncing: Fatal exception > > > > > > > [ 0.000000] Rebooting in > > > > > > > ----------------------------------------------------- > > > > > > > > > > > > > > After reverting this patch I can normally boot the kernel. > > > > > > > The kernel is build with CONFIG_SCHEDSTATS not set. > > > > > > > > > > > > > > -- > > > > > > > Pengutronix e.K. | | > > > > > > > Industrial Linux Solutions | http://www.pengutronix.de/ | > > > > > > > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > > > > > > > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > > > > > > > > > > > Hi Oleksij, > > > > > > > > > > > > This really makes me confused. > > > > > > If CONFIG_SCHEDSTATS is not set, trace_sched_stat_{iowait, blocked, > > > > > > wait, sleep} will be optimized out by > > > > > > the compiler. That should not effect other codes. > > > > > > > > > > > > Would you pls. try bellow command on your build server? > > > > > > $ objdump -dr kernel/sched/fair.o | awk '/>:$/ { F=$2 } /sched_stat/ { > > > > > > print F " " $0 }' > > > > > > > > > > > > > > > > Plus, could you pls. show me the difference on the objdump of these > > > > > two vmlinux (with and without my patch) ? > > > > > > > > Both files are in attachment. > > > > > > > > > > Hi Oleksij, > > > > > > Unfortunately I don't have a mips toolchain on hand. > > > It would be better if you could give me the disassembled code of > > > these two vmlinuxs. > > > I will try to build a cross toolchain for MIPS 24Kc, that may take some time. > > > > disassembled code is in attachment. > > > > -- > > + Steve, > > Hi Oleksij, > > I guess this issue is related with __mcount_loc, but I don't have a > clear idea how to fix it yet. > It would be better if you could share your .config file as well. > > Hi Steve, > > Do you have any suggestion on this issue? > My guess is when we define a tracepoint as nop, there's something > wrong in __mcount_loc, > which will be used by MIPS and then this oops occurs. kernel config is in attachment. -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | [-- Attachment #2: kernelconfig --] [-- Type: text/plain, Size: 62239 bytes --] # # Automatically generated file; DO NOT EDIT. # Linux/mips 5.2.0-rc4 Kernel Configuration # # # Compiler: mips-softfloat-linux-gnu-gcc (OSELAS.Toolchain-2018.12.0 8-20181130) 8.2.1 20181130 # CONFIG_CC_IS_GCC=y CONFIG_GCC_VERSION=80201 CONFIG_CLANG_VERSION=0 CONFIG_CC_HAS_ASM_GOTO=y CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED=y CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y # # General setup # CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 # CONFIG_COMPILE_TEST is not set CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_BUILD_SALT="" CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_HAVE_KERNEL_LZ4=y # CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set CONFIG_KERNEL_XZ=y # CONFIG_KERNEL_LZO is not set # CONFIG_KERNEL_LZ4 is not set CONFIG_DEFAULT_HOSTNAME="(none)" # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_CROSS_MEMORY_ATTACH is not set # CONFIG_USELIB is not set # CONFIG_AUDIT is not set # # IRQ subsystem # CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_IRQ_DOMAIN=y CONFIG_HANDLE_DOMAIN_IRQ=y CONFIG_IRQ_FORCED_THREADING=y # CONFIG_GENERIC_IRQ_DEBUGFS is not set # end of IRQ subsystem CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CMOS_UPDATE=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_HZ_PERIODIC=y # CONFIG_NO_HZ_IDLE is not set # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y # end of Timers subsystem # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_COUNT=y # # CPU/Task time and stats accounting # CONFIG_TICK_CPU_ACCOUNTING=y # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set # CONFIG_IRQ_TIME_ACCOUNTING is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_PSI is not set # end of CPU/Task time and stats accounting # # RCU Subsystem # CONFIG_PREEMPT_RCU=y CONFIG_RCU_EXPERT=y CONFIG_SRCU=y CONFIG_TREE_SRCU=y CONFIG_TASKS_RCU=y CONFIG_RCU_STALL_COMMON=y CONFIG_RCU_NEED_SEGCBLIST=y CONFIG_RCU_FANOUT=32 CONFIG_RCU_FANOUT_LEAF=16 # CONFIG_RCU_BOOST is not set # CONFIG_RCU_NOCB_CPU is not set # end of RCU Subsystem CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_IKHEADERS is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 CONFIG_GENERIC_SCHED_CLOCK=y CONFIG_CGROUPS=y # CONFIG_MEMCG is not set # CONFIG_BLK_CGROUP is not set # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUP_PIDS is not set # CONFIG_CGROUP_RDMA is not set # CONFIG_CGROUP_FREEZER is not set # CONFIG_CGROUP_DEVICE is not set # CONFIG_CGROUP_CPUACCT is not set CONFIG_CGROUP_BPF=y # CONFIG_CGROUP_DEBUG is not set CONFIG_SOCK_CGROUP_DATA=y CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set CONFIG_NET_NS=y # CONFIG_CHECKPOINT_RESTORE is not set # CONFIG_SCHED_AUTOGROUP is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y CONFIG_SYSCTL=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_BPF=y CONFIG_EXPERT=y CONFIG_MULTIUSER=y # CONFIG_SGETMASK_SYSCALL is not set # CONFIG_SYSFS_SYSCALL is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_FHANDLE=y CONFIG_POSIX_TIMERS=y CONFIG_PRINTK=y CONFIG_PRINTK_NMI=y CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_FUTEX_PI=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y # CONFIG_AIO is not set CONFIG_IO_URING=y CONFIG_ADVISE_SYSCALLS=y CONFIG_MEMBARRIER=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_BASE_RELATIVE=y CONFIG_BPF_SYSCALL=y # CONFIG_USERFAULTFD is not set CONFIG_RSEQ=y # CONFIG_DEBUG_RSEQ is not set CONFIG_EMBEDDED=y CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_USE_VMALLOC=y # CONFIG_PC104 is not set # # Kernel Performance Events And Counters # # CONFIG_PERF_EVENTS is not set # end of Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLAB_MERGE_DEFAULT=y CONFIG_SLAB_FREELIST_RANDOM=y # CONFIG_SLAB_FREELIST_HARDENED is not set # CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set # CONFIG_PROFILING is not set CONFIG_TRACEPOINTS=y # end of General setup CONFIG_MIPS=y # # Machine selection # # CONFIG_MIPS_GENERIC is not set # CONFIG_MIPS_ALCHEMY is not set # CONFIG_AR7 is not set # CONFIG_ATH25 is not set CONFIG_ATH79=y # CONFIG_BMIPS_GENERIC is not set # CONFIG_BCM47XX is not set # CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MACH_INGENIC is not set # CONFIG_LANTIQ is not set # CONFIG_LASAT is not set # CONFIG_MACH_LOONGSON32 is not set # CONFIG_MACH_LOONGSON64 is not set # CONFIG_MACH_PISTACHIO is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MACH_PIC32 is not set # CONFIG_NEC_MARKEINS is not set # CONFIG_MACH_VR41XX is not set # CONFIG_NXP_STB220 is not set # CONFIG_NXP_STB225 is not set # CONFIG_PMC_MSP is not set # CONFIG_RALINK is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_MACH_TX39XX is not set # CONFIG_MACH_TX49XX is not set # CONFIG_MIKROTIK_RB532 is not set # CONFIG_CAVIUM_OCTEON_SOC is not set # CONFIG_NLM_XLR_BOARD is not set # CONFIG_NLM_XLP_BOARD is not set # CONFIG_MIPS_PARAVIRT is not set # end of Machine selection CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_BOOT_RAW=y CONFIG_CEVT_R4K=y CONFIG_CSRC_R4K=y CONFIG_MIPS_CLOCK_VSYSCALL=y CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_DMA_NONCOHERENT=y CONFIG_SYS_HAS_EARLY_PRINTK=y CONFIG_CPU_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_MIPS_SPRAM=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # CONFIG_CPU_MIPS32_R2=y CONFIG_SYS_SUPPORTS_ZBOOT=y CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y CONFIG_SYS_HAS_CPU_MIPS32_R2=y # end of CPU selection CONFIG_CPU_MIPS32=y CONFIG_CPU_MIPSR2=y CONFIG_TARGET_ISA_REV=2 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_HARDWARE_WATCHPOINTS=y # # Kernel type # CONFIG_32BIT=y # CONFIG_KVM_GUEST is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_CPU_HAS_PREFETCH=y CONFIG_CPU_GENERIC_DUMP_TLB=y CONFIG_MIPS_FP_SUPPORT=y CONFIG_CPU_R4K_FPU=y CONFIG_CPU_R4K_CACHE_TLB=y CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y CONFIG_CPU_HAS_RIXI=y CONFIG_CPU_HAS_LOAD_STORE_LR=y CONFIG_CPU_HAS_SYNC=y CONFIG_MIPS_ASID_SHIFT=0 CONFIG_MIPS_ASID_BITS=8 CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_SYS_SUPPORTS_MIPS16=y CONFIG_CPU_SUPPORTS_MSA=y CONFIG_ARCH_FLATMEM_ENABLE=y # CONFIG_HZ_24 is not set # CONFIG_HZ_48 is not set CONFIG_HZ_100=y # CONFIG_HZ_128 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_256 is not set # CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y CONFIG_HZ=100 CONFIG_SCHED_HRTICK=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_SECCOMP=y # CONFIG_MIPS_O32_FP64_SUPPORT is not set CONFIG_USE_OF=y # CONFIG_MIPS_NO_APPENDED_DTB is not set # CONFIG_MIPS_ELF_APPENDED_DTB is not set CONFIG_MIPS_RAW_APPENDED_DTB=y CONFIG_MIPS_CMDLINE_FROM_DTB=y # CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set # CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set # end of Kernel type CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_PGTABLE_LEVELS=2 # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_PCI_DRIVERS_LEGACY=y CONFIG_MMU=y CONFIG_ARCH_MMAP_RND_BITS_MIN=8 CONFIG_ARCH_MMAP_RND_BITS_MAX=15 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 # end of Bus options (PCI, PCMCIA, EISA, ISA, TC) CONFIG_TRAD_SIGNALS=y # # Power management options # CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_SUSPEND is not set CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_CLK=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set # end of Power management options # # CPU Power Management # # # CPU Idle # # CONFIG_CPU_IDLE is not set # end of CPU Idle # end of CPU Power Management # # Firmware Drivers # # CONFIG_FIRMWARE_MEMMAP is not set # CONFIG_GOOGLE_FIRMWARE is not set CONFIG_EFI_EARLYCON=y # # Tegra firmware driver # # end of Tegra firmware driver # end of Firmware Drivers CONFIG_HAVE_KVM=y # CONFIG_VIRTUALIZATION is not set # # General architecture-dependent options # CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set # CONFIG_JUMP_LABEL is not set CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_NMI=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_ARCH_32BIT_OFF_T=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_RSEQ=y CONFIG_HAVE_CLK=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP_FILTER=y CONFIG_HAVE_STACKPROTECTOR=y CONFIG_CC_HAS_STACKPROTECTOR_NONE=y CONFIG_STACKPROTECTOR=y CONFIG_STACKPROTECTOR_STRONG=y CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_MODULES_USE_ELF_REL=y CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_HAVE_EXIT_THREAD=y CONFIG_ARCH_MMAP_RND_BITS=8 CONFIG_HAVE_COPY_THREAD_TLS=y CONFIG_CLONE_BACKWARDS=y CONFIG_64BIT_TIME=y CONFIG_COMPAT_32BIT_TIME=y # CONFIG_REFCOUNT_FULL is not set CONFIG_HAVE_ARCH_COMPILER_H=y CONFIG_ARCH_USE_MEMREMAP_PROT=y # CONFIG_LOCK_EVENT_COUNTS is not set # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set # end of GCOV-based kernel profiling CONFIG_PLUGIN_HOSTCC="" # end of General architecture-dependent options CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set # CONFIG_MODULE_COMPRESS is not set # CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSGLIB is not set # CONFIG_BLK_DEV_INTEGRITY is not set # CONFIG_BLK_DEV_ZONED is not set # CONFIG_BLK_CMDLINE_PARSER is not set # CONFIG_BLK_WBT is not set # CONFIG_BLK_DEBUG_FS is not set # CONFIG_BLK_SED_OPAL is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_AIX_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_CMDLINE_PARTITION is not set # end of Partition Types CONFIG_BLK_PM=y # # IO Schedulers # # CONFIG_MQ_IOSCHED_DEADLINE is not set # CONFIG_MQ_IOSCHED_KYBER is not set # CONFIG_IOSCHED_BFQ is not set # end of IO Schedulers CONFIG_UNINLINE_SPIN_UNLOCK=y CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y CONFIG_ARCH_USE_QUEUED_RWLOCKS=y # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_ARCH_BINFMT_ELF_STATE=y CONFIG_ELFCORE=y CONFIG_BINFMT_SCRIPT=y # CONFIG_BINFMT_MISC is not set # CONFIG_COREDUMP is not set # end of Executable file formats # # Memory Management options # CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_COMPACTION=y CONFIG_MIGRATION=y CONFIG_VIRT_TO_BUS=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_NEED_PER_CPU_KM=y # CONFIG_CLEANCACHE is not set # CONFIG_CMA is not set # CONFIG_ZPOOL is not set # CONFIG_ZBUD is not set # CONFIG_ZSMALLOC is not set # CONFIG_IDLE_PAGE_TRACKING is not set # CONFIG_PERCPU_STATS is not set # CONFIG_GUP_BENCHMARK is not set # end of Memory Management options CONFIG_NET=y CONFIG_NET_INGRESS=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_DIAG is not set CONFIG_UNIX=y CONFIG_UNIX_SCM=y # CONFIG_UNIX_DIAG is not set # CONFIG_TLS is not set # CONFIG_XFRM_USER is not set # CONFIG_NET_KEY is not set # CONFIG_XDP_SOCKETS is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y # CONFIG_IP_FIB_TRIE_STATS is not set CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y # CONFIG_IP_PNP_BOOTP is not set # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE_DEMUX is not set CONFIG_IP_MROUTE_COMMON=y CONFIG_IP_MROUTE=y CONFIG_IP_MROUTE_MULTIPLE_TABLES=y # CONFIG_IP_PIMSM_V1 is not set # CONFIG_IP_PIMSM_V2 is not set CONFIG_SYN_COOKIES=y # CONFIG_NET_IPVTI is not set # CONFIG_NET_FOU is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y # CONFIG_TCP_CONG_BIC is not set CONFIG_TCP_CONG_CUBIC=y # CONFIG_TCP_CONG_WESTWOOD is not set # CONFIG_TCP_CONG_HTCP is not set # CONFIG_TCP_CONG_HSTCP is not set # CONFIG_TCP_CONG_HYBLA is not set # CONFIG_TCP_CONG_VEGAS is not set # CONFIG_TCP_CONG_NV is not set # CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_TCP_CONG_LP is not set # CONFIG_TCP_CONG_VENO is not set # CONFIG_TCP_CONG_YEAH is not set # CONFIG_TCP_CONG_ILLINOIS is not set # CONFIG_TCP_CONG_DCTCP is not set # CONFIG_TCP_CONG_CDG is not set # CONFIG_TCP_CONG_BBR is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=y # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_IPV6_ILA is not set # CONFIG_IPV6_VTI is not set # CONFIG_IPV6_SIT is not set # CONFIG_IPV6_TUNNEL is not set CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y CONFIG_IPV6_MROUTE=y # CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set # CONFIG_IPV6_PIMSM_V2 is not set # CONFIG_IPV6_SEG6_LWTUNNEL is not set # CONFIG_IPV6_SEG6_HMAC is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETWORK_PHY_TIMESTAMPING is not set CONFIG_NETFILTER=y CONFIG_NETFILTER_ADVANCED=y # CONFIG_BRIDGE_NETFILTER is not set # # Core Netfilter Configuration # CONFIG_NETFILTER_INGRESS=y # CONFIG_NETFILTER_NETLINK_ACCT is not set # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NETFILTER_NETLINK_OSF is not set CONFIG_NF_CONNTRACK=m CONFIG_NF_LOG_COMMON=m # CONFIG_NF_LOG_NETDEV is not set CONFIG_NF_CONNTRACK_MARK=y # CONFIG_NF_CONNTRACK_ZONES is not set CONFIG_NF_CONNTRACK_PROCFS=y # CONFIG_NF_CONNTRACK_EVENTS is not set # CONFIG_NF_CONNTRACK_TIMEOUT is not set # CONFIG_NF_CONNTRACK_TIMESTAMP is not set # CONFIG_NF_CONNTRACK_LABELS is not set # CONFIG_NF_CT_PROTO_DCCP is not set # CONFIG_NF_CT_PROTO_SCTP is not set # CONFIG_NF_CT_PROTO_UDPLITE is not set # CONFIG_NF_CONNTRACK_AMANDA is not set # CONFIG_NF_CONNTRACK_FTP is not set # CONFIG_NF_CONNTRACK_H323 is not set # CONFIG_NF_CONNTRACK_IRC is not set # CONFIG_NF_CONNTRACK_NETBIOS_NS is not set # CONFIG_NF_CONNTRACK_SNMP is not set # CONFIG_NF_CONNTRACK_PPTP is not set # CONFIG_NF_CONNTRACK_SANE is not set # CONFIG_NF_CONNTRACK_SIP is not set # CONFIG_NF_CONNTRACK_TFTP is not set # CONFIG_NF_CT_NETLINK is not set CONFIG_NF_NAT=m CONFIG_NF_NAT_REDIRECT=y CONFIG_NF_NAT_MASQUERADE=y # CONFIG_NF_TABLES is not set CONFIG_NETFILTER_XTABLES=m # # Xtables combined modules # CONFIG_NETFILTER_XT_MARK=m # CONFIG_NETFILTER_XT_CONNMARK is not set # # Xtables targets # # CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set # CONFIG_NETFILTER_XT_TARGET_HL is not set # CONFIG_NETFILTER_XT_TARGET_HMARK is not set # CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set # CONFIG_NETFILTER_XT_TARGET_LED is not set CONFIG_NETFILTER_XT_TARGET_LOG=m # CONFIG_NETFILTER_XT_TARGET_MARK is not set CONFIG_NETFILTER_XT_NAT=m # CONFIG_NETFILTER_XT_TARGET_NETMAP is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set CONFIG_NETFILTER_XT_TARGET_REDIRECT=m CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m # CONFIG_NETFILTER_XT_TARGET_TEE is not set # CONFIG_NETFILTER_XT_TARGET_TPROXY is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=m # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set # # Xtables matches # # CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set # CONFIG_NETFILTER_XT_MATCH_BPF is not set # CONFIG_NETFILTER_XT_MATCH_CGROUP is not set # CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set CONFIG_NETFILTER_XT_MATCH_COMMENT=m # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set # CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m # CONFIG_NETFILTER_XT_MATCH_CPU is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ECN is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set # CONFIG_NETFILTER_XT_MATCH_HL is not set # CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_L2TP is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m # CONFIG_NETFILTER_XT_MATCH_MARK is not set CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m # CONFIG_NETFILTER_XT_MATCH_NFACCT is not set # CONFIG_NETFILTER_XT_MATCH_OSF is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_SOCKET is not set CONFIG_NETFILTER_XT_MATCH_STATE=m # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set CONFIG_NETFILTER_XT_MATCH_TIME=m # CONFIG_NETFILTER_XT_MATCH_U32 is not set # end of Core Netfilter Configuration # CONFIG_IP_SET is not set # CONFIG_IP_VS is not set # # IP: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV4=m # CONFIG_NF_SOCKET_IPV4 is not set # CONFIG_NF_TPROXY_IPV4 is not set # CONFIG_NF_DUP_IPV4 is not set # CONFIG_NF_LOG_ARP is not set CONFIG_NF_LOG_IPV4=m CONFIG_NF_REJECT_IPV4=m CONFIG_IP_NF_IPTABLES=m # CONFIG_IP_NF_MATCH_AH is not set # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_RPFILTER is not set # CONFIG_IP_NF_MATCH_TTL is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m # CONFIG_IP_NF_TARGET_SYNPROXY is not set CONFIG_IP_NF_NAT=m CONFIG_IP_NF_TARGET_MASQUERADE=m # CONFIG_IP_NF_TARGET_NETMAP is not set CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m # CONFIG_IP_NF_TARGET_CLUSTERIP is not set # CONFIG_IP_NF_TARGET_ECN is not set # CONFIG_IP_NF_TARGET_TTL is not set # CONFIG_IP_NF_RAW is not set # CONFIG_IP_NF_ARPTABLES is not set # end of IP: Netfilter Configuration # # IPv6: Netfilter Configuration # # CONFIG_NF_SOCKET_IPV6 is not set # CONFIG_NF_TPROXY_IPV6 is not set # CONFIG_NF_DUP_IPV6 is not set CONFIG_NF_REJECT_IPV6=m CONFIG_NF_LOG_IPV6=m CONFIG_IP6_NF_IPTABLES=m # CONFIG_IP6_NF_MATCH_AH is not set # CONFIG_IP6_NF_MATCH_EUI64 is not set # CONFIG_IP6_NF_MATCH_FRAG is not set # CONFIG_IP6_NF_MATCH_OPTS is not set # CONFIG_IP6_NF_MATCH_HL is not set # CONFIG_IP6_NF_MATCH_IPV6HEADER is not set # CONFIG_IP6_NF_MATCH_MH is not set # CONFIG_IP6_NF_MATCH_RPFILTER is not set # CONFIG_IP6_NF_MATCH_RT is not set # CONFIG_IP6_NF_MATCH_SRH is not set # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m # CONFIG_IP6_NF_TARGET_SYNPROXY is not set CONFIG_IP6_NF_MANGLE=m # CONFIG_IP6_NF_RAW is not set # CONFIG_IP6_NF_NAT is not set # end of IPv6: Netfilter Configuration CONFIG_NF_DEFRAG_IPV6=m # CONFIG_BRIDGE_NF_EBTABLES is not set # CONFIG_BPFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set CONFIG_STP=y CONFIG_BRIDGE=y CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_BRIDGE_VLAN_FILTERING=y CONFIG_HAVE_NET_DSA=y CONFIG_NET_DSA=y # CONFIG_NET_DSA_TAG_8021Q is not set # CONFIG_NET_DSA_TAG_BRCM is not set # CONFIG_NET_DSA_TAG_BRCM_PREPEND is not set # CONFIG_NET_DSA_TAG_GSWIP is not set # CONFIG_NET_DSA_TAG_DSA is not set # CONFIG_NET_DSA_TAG_EDSA is not set # CONFIG_NET_DSA_TAG_MTK is not set # CONFIG_NET_DSA_TAG_KSZ is not set # CONFIG_NET_DSA_TAG_KSZ9477 is not set # CONFIG_NET_DSA_TAG_QCA is not set # CONFIG_NET_DSA_TAG_LAN9303 is not set # CONFIG_NET_DSA_TAG_SJA1105 is not set CONFIG_NET_DSA_TAG_TRAILER=y CONFIG_VLAN_8021Q=y # CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_VLAN_8021Q_MVRP is not set # CONFIG_DECNET is not set CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_PHONET is not set # CONFIG_6LOWPAN is not set # CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # # Queueing/Scheduling # # CONFIG_NET_SCH_CBQ is not set # CONFIG_NET_SCH_HTB is not set # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_PRIO is not set # CONFIG_NET_SCH_MULTIQ is not set # CONFIG_NET_SCH_RED is not set # CONFIG_NET_SCH_SFB is not set # CONFIG_NET_SCH_SFQ is not set # CONFIG_NET_SCH_TEQL is not set # CONFIG_NET_SCH_TBF is not set # CONFIG_NET_SCH_CBS is not set # CONFIG_NET_SCH_ETF is not set # CONFIG_NET_SCH_TAPRIO is not set # CONFIG_NET_SCH_GRED is not set # CONFIG_NET_SCH_DSMARK is not set # CONFIG_NET_SCH_NETEM is not set # CONFIG_NET_SCH_DRR is not set # CONFIG_NET_SCH_MQPRIO is not set # CONFIG_NET_SCH_SKBPRIO is not set # CONFIG_NET_SCH_CHOKE is not set # CONFIG_NET_SCH_QFQ is not set # CONFIG_NET_SCH_CODEL is not set CONFIG_NET_SCH_FQ_CODEL=y # CONFIG_NET_SCH_CAKE is not set # CONFIG_NET_SCH_FQ is not set # CONFIG_NET_SCH_HHF is not set # CONFIG_NET_SCH_PIE is not set # CONFIG_NET_SCH_PLUG is not set CONFIG_NET_SCH_DEFAULT=y CONFIG_DEFAULT_FQ_CODEL=y # CONFIG_DEFAULT_PFIFO_FAST is not set CONFIG_DEFAULT_NET_SCH="fq_codel" # # Classification # # CONFIG_NET_CLS_BASIC is not set # CONFIG_NET_CLS_TCINDEX is not set # CONFIG_NET_CLS_ROUTE4 is not set # CONFIG_NET_CLS_FW is not set # CONFIG_NET_CLS_U32 is not set # CONFIG_NET_CLS_RSVP is not set # CONFIG_NET_CLS_RSVP6 is not set # CONFIG_NET_CLS_FLOW is not set # CONFIG_NET_CLS_CGROUP is not set # CONFIG_NET_CLS_BPF is not set # CONFIG_NET_CLS_FLOWER is not set # CONFIG_NET_CLS_MATCHALL is not set # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_SCH_FIFO=y # CONFIG_DCB is not set CONFIG_DNS_RESOLVER=y # CONFIG_BATMAN_ADV is not set # CONFIG_OPENVSWITCH is not set # CONFIG_VSOCKETS is not set # CONFIG_NETLINK_DIAG is not set # CONFIG_MPLS is not set # CONFIG_NET_NSH is not set # CONFIG_HSR is not set CONFIG_NET_SWITCHDEV=y # CONFIG_NET_L3_MASTER_DEV is not set # CONFIG_NET_NCSI is not set # CONFIG_CGROUP_NET_PRIO is not set # CONFIG_CGROUP_NET_CLASSID is not set CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y # CONFIG_BPF_JIT is not set # CONFIG_BPF_STREAM_PARSER is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_DROP_MONITOR is not set # end of Network testing # end of Networking options # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_AF_KCM is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # # CFG80211 needs to be enabled for MAC80211 # CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 # CONFIG_WIMAX is not set CONFIG_RFKILL=y CONFIG_RFKILL_LEDS=y # CONFIG_RFKILL_GPIO is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set # CONFIG_NFC is not set # CONFIG_PSAMPLE is not set # CONFIG_NET_IFE is not set # CONFIG_LWTUNNEL is not set CONFIG_NET_DEVLINK=y # CONFIG_FAILOVER is not set CONFIG_HAVE_EBPF_JIT=y # # Device Drivers # # CONFIG_PCCARD is not set # # Generic Driver Options # CONFIG_UEVENT_HELPER=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # # Firmware loader # CONFIG_FW_LOADER=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_FW_LOADER_USER_HELPER is not set # end of Firmware loader CONFIG_ALLOW_DEV_COREDUMP=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set # CONFIG_TEST_ASYNC_DRIVER_PROBE is not set CONFIG_GENERIC_CPU_AUTOPROBE=y CONFIG_REGMAP=y CONFIG_REGMAP_MMIO=y # end of Generic Driver Options # # Bus devices # # CONFIG_BRCMSTB_GISB_ARB is not set # CONFIG_MIPS_CDMM is not set # CONFIG_SIMPLE_PM_BUS is not set # end of Bus devices # CONFIG_CONNECTOR is not set # CONFIG_GNSS is not set CONFIG_MTD=y # CONFIG_MTD_TESTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # # Partition parsers # # CONFIG_MTD_REDBOOT_PARTS is not set # end of Partition parsers # # User Modules And Translation Layers # CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set # CONFIG_SM_FTL is not set # CONFIG_MTD_OOPS is not set # CONFIG_MTD_PARTITIONED_MASTER is not set # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_NOSWAP=y # CONFIG_MTD_CFI_BE_BYTE_SWAP is not set # CONFIG_MTD_CFI_LE_BYTE_SWAP is not set CONFIG_MTD_CFI_GEOMETRY=y # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set CONFIG_MTD_MAP_BANK_WIDTH_2=y # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y # CONFIG_MTD_CFI_I2 is not set # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_OTP is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set # end of RAM/ROM/Flash chip drivers # # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_PHYSMAP_COMPAT is not set CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PHYSMAP_VERSATILE is not set # CONFIG_MTD_PHYSMAP_GEMINI is not set # CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set # CONFIG_MTD_PLATRAM is not set # end of Mapping drivers for chip access # # Self-contained MTD device drivers # # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers # # CONFIG_MTD_DOCG3 is not set # end of Self-contained MTD device drivers # CONFIG_MTD_ONENAND is not set # CONFIG_MTD_RAW_NAND is not set # # LPDDR & LPDDR2 PCM memory drivers # # CONFIG_MTD_LPDDR is not set # end of LPDDR & LPDDR2 PCM memory drivers CONFIG_MTD_SPI_NOR=y # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set # CONFIG_SPI_MTK_QUADSPI is not set # CONFIG_MTD_UBI is not set CONFIG_DTC=y CONFIG_OF=y # CONFIG_OF_UNITTEST is not set CONFIG_OF_FLATTREE=y CONFIG_OF_EARLY_FLATTREE=y CONFIG_OF_KOBJ=y CONFIG_OF_ADDRESS=y CONFIG_OF_IRQ=y CONFIG_OF_NET=y CONFIG_OF_MDIO=y CONFIG_OF_RESERVED_MEM=y # CONFIG_OF_OVERLAY is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_NULL_BLK is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_RBD is not set # # NVME Support # # CONFIG_NVME_FC is not set # end of NVME Support # # Misc devices # # CONFIG_DUMMY_IRQ is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_SRAM is not set # CONFIG_PVPANIC is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_93CX6 is not set # end of EEPROM support # # Texas Instruments shared transport line discipline # # CONFIG_TI_ST is not set # end of Texas Instruments shared transport line discipline # # Altera FPGA firmware download module (requires I2C) # # # Intel MIC & related support # # # Intel MIC Bus Driver # # # SCIF Bus Driver # # # VOP Bus Driver # # CONFIG_VOP_BUS is not set # # Intel MIC Host Driver # # # Intel MIC Card Driver # # # SCIF Driver # # # Intel MIC Coprocessor State Management (COSM) Drivers # # # VOP Driver # # end of Intel MIC & related support # CONFIG_ECHO is not set # end of Misc devices CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # end of SCSI device support # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_TARGET_CORE is not set CONFIG_NETDEVICES=y CONFIG_NET_CORE=y # CONFIG_BONDING is not set # CONFIG_DUMMY is not set # CONFIG_EQUALIZER is not set # CONFIG_NET_TEAM is not set # CONFIG_MACVLAN is not set # CONFIG_IPVLAN is not set # CONFIG_VXLAN is not set # CONFIG_GENEVE is not set # CONFIG_GTP is not set # CONFIG_MACSEC is not set # CONFIG_NETCONSOLE is not set # CONFIG_TUN is not set # CONFIG_TUN_VNET_CROSS_LE is not set # CONFIG_VETH is not set # CONFIG_NLMON is not set # # CAIF transport drivers # # # Distributed Switch Architecture drivers # # CONFIG_B53 is not set # CONFIG_NET_DSA_BCM_SF2 is not set # CONFIG_NET_DSA_LOOP is not set # CONFIG_NET_DSA_LANTIQ_GSWIP is not set # CONFIG_NET_DSA_MT7530 is not set CONFIG_NET_DSA_MV88E6060=y # CONFIG_NET_DSA_MICROCHIP_KSZ9477 is not set # CONFIG_NET_DSA_MV88E6XXX is not set # CONFIG_NET_DSA_QCA8K is not set # CONFIG_NET_DSA_REALTEK_SMI is not set # CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set # end of Distributed Switch Architecture drivers CONFIG_ETHERNET=y CONFIG_NET_VENDOR_ALACRITECH=y # CONFIG_ALTERA_TSE is not set CONFIG_NET_VENDOR_AMAZON=y CONFIG_NET_VENDOR_AQUANTIA=y CONFIG_NET_VENDOR_ARC=y CONFIG_NET_VENDOR_ATHEROS=y CONFIG_AG71XX=y CONFIG_NET_VENDOR_AURORA=y # CONFIG_AURORA_NB8800 is not set CONFIG_NET_VENDOR_BROADCOM=y # CONFIG_B44 is not set # CONFIG_BCMGENET is not set # CONFIG_SYSTEMPORT is not set CONFIG_NET_VENDOR_CADENCE=y # CONFIG_MACB is not set CONFIG_NET_VENDOR_CAVIUM=y CONFIG_NET_VENDOR_CORTINA=y # CONFIG_GEMINI_ETHERNET is not set # CONFIG_DM9000 is not set # CONFIG_DNET is not set CONFIG_NET_VENDOR_EZCHIP=y # CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set CONFIG_NET_VENDOR_HUAWEI=y CONFIG_NET_VENDOR_I825XX=y CONFIG_NET_VENDOR_INTEL=y CONFIG_NET_VENDOR_MARVELL=y # CONFIG_MVMDIO is not set CONFIG_NET_VENDOR_MICREL=y # CONFIG_KS8851_MLL is not set CONFIG_NET_VENDOR_MICROCHIP=y CONFIG_NET_VENDOR_MICROSEMI=y # CONFIG_MSCC_OCELOT_SWITCH is not set CONFIG_NET_VENDOR_NATSEMI=y CONFIG_NET_VENDOR_NETRONOME=y CONFIG_NET_VENDOR_NI=y # CONFIG_NI_XGE_MANAGEMENT_ENET is not set CONFIG_NET_VENDOR_8390=y # CONFIG_AX88796 is not set # CONFIG_ETHOC is not set CONFIG_NET_VENDOR_QUALCOMM=y # CONFIG_QCOM_EMAC is not set # CONFIG_RMNET is not set CONFIG_NET_VENDOR_RENESAS=y CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SAMSUNG=y # CONFIG_SXGBE_ETH is not set CONFIG_NET_VENDOR_SEEQ=y CONFIG_NET_VENDOR_SOLARFLARE=y CONFIG_NET_VENDOR_SMSC=y # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set CONFIG_NET_VENDOR_SOCIONEXT=y CONFIG_NET_VENDOR_STMICRO=y # CONFIG_STMMAC_ETH is not set CONFIG_NET_VENDOR_SYNOPSYS=y # CONFIG_DWC_XLGMAC is not set CONFIG_NET_VENDOR_VIA=y # CONFIG_VIA_RHINE is not set # CONFIG_VIA_VELOCITY is not set CONFIG_NET_VENDOR_WIZNET=y # CONFIG_WIZNET_W5100 is not set # CONFIG_WIZNET_W5300 is not set CONFIG_NET_VENDOR_XILINX=y # CONFIG_XILINX_EMACLITE is not set CONFIG_MDIO_DEVICE=y CONFIG_MDIO_BUS=y # CONFIG_MDIO_BCM_UNIMAC is not set # CONFIG_MDIO_BITBANG is not set # CONFIG_MDIO_BUS_MUX_GPIO is not set # CONFIG_MDIO_BUS_MUX_MMIOREG is not set # CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set # CONFIG_MDIO_HISI_FEMAC is not set # CONFIG_MDIO_MSCC_MIIM is not set CONFIG_PHYLINK=y CONFIG_PHYLIB=y CONFIG_SWPHY=y # CONFIG_LED_TRIGGER_PHY is not set # # MII PHY device drivers # # CONFIG_AMD_PHY is not set # CONFIG_AQUANTIA_PHY is not set # CONFIG_ASIX_PHY is not set # CONFIG_AT803X_PHY is not set # CONFIG_BCM7XXX_PHY is not set # CONFIG_BCM87XX_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_CORTINA_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_DP83822_PHY is not set # CONFIG_DP83TC811_PHY is not set # CONFIG_DP83848_PHY is not set # CONFIG_DP83867_PHY is not set CONFIG_FIXED_PHY=y # CONFIG_ICPLUS_PHY is not set # CONFIG_INTEL_XWAY_PHY is not set # CONFIG_LSI_ET1011C_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_MARVELL_PHY is not set # CONFIG_MARVELL_10G_PHY is not set # CONFIG_MICREL_PHY is not set # CONFIG_MICROCHIP_PHY is not set # CONFIG_MICROCHIP_T1_PHY is not set # CONFIG_MICROSEMI_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_RENESAS_PHY is not set # CONFIG_ROCKCHIP_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_STE10XP is not set # CONFIG_TERANETICS_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_XILINX_GMII2RGMII is not set CONFIG_PPP=m # CONFIG_PPP_BSDCOMP is not set # CONFIG_PPP_DEFLATE is not set CONFIG_PPP_FILTER=y # CONFIG_PPP_MPPE is not set CONFIG_PPP_MULTILINK=y CONFIG_PPPOE=m CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set # CONFIG_SLIP is not set CONFIG_SLHC=m # # Host-side USB support is needed for USB Network Adapter support # CONFIG_WLAN=y # CONFIG_WIRELESS_WDS is not set # CONFIG_WLAN_VENDOR_ADMTEK is not set # CONFIG_WLAN_VENDOR_ATH is not set # CONFIG_WLAN_VENDOR_ATMEL is not set # CONFIG_WLAN_VENDOR_BROADCOM is not set # CONFIG_WLAN_VENDOR_CISCO is not set # CONFIG_WLAN_VENDOR_INTEL is not set # CONFIG_WLAN_VENDOR_INTERSIL is not set # CONFIG_WLAN_VENDOR_MARVELL is not set # CONFIG_WLAN_VENDOR_MEDIATEK is not set # CONFIG_WLAN_VENDOR_RALINK is not set # CONFIG_WLAN_VENDOR_REALTEK is not set # CONFIG_WLAN_VENDOR_RSI is not set # CONFIG_WLAN_VENDOR_ST is not set # CONFIG_WLAN_VENDOR_TI is not set # CONFIG_WLAN_VENDOR_ZYDAS is not set # CONFIG_WLAN_VENDOR_QUANTENNA is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # CONFIG_WAN is not set # CONFIG_NETDEVSIM is not set # CONFIG_NET_FAILOVER is not set CONFIG_ISDN=y # CONFIG_ISDN_I4L is not set # CONFIG_ISDN_CAPI is not set # CONFIG_ISDN_DRV_GIGASET is not set # CONFIG_MISDN is not set # CONFIG_NVM is not set # # Input device support # # CONFIG_INPUT is not set # # Hardware I/O ports # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # end of Hardware I/O ports # end of Input device support # # Character devices # CONFIG_TTY=y # CONFIG_VT is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_N_GSM is not set # CONFIG_TRACE_SINK is not set # CONFIG_NULL_TTY is not set CONFIG_LDISC_AUTOLOAD=y # CONFIG_DEVMEM is not set # CONFIG_DEVKMEM is not set # # Serial drivers # CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=1 CONFIG_SERIAL_8250_RUNTIME_UARTS=1 # CONFIG_SERIAL_8250_EXTENDED is not set # CONFIG_SERIAL_8250_ASPEED_VUART is not set # CONFIG_SERIAL_8250_DW is not set # CONFIG_SERIAL_8250_RT288X is not set # CONFIG_SERIAL_8250_INGENIC is not set CONFIG_SERIAL_OF_PLATFORM=y # # Non-8250 serial port support # # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_SIFIVE is not set # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_BCM63XX is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_XILINX_PS_UART is not set CONFIG_SERIAL_AR933X=y CONFIG_SERIAL_AR933X_CONSOLE=y CONFIG_SERIAL_AR933X_NR_UARTS=2 # CONFIG_SERIAL_ARC is not set # CONFIG_SERIAL_FSL_LPUART is not set # CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set # end of Serial drivers # CONFIG_SERIAL_DEV_BUS is not set # CONFIG_TTY_PRINTK is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_XILLYBUS is not set # end of Character devices # # I2C support # # CONFIG_I2C is not set # end of I2C support # CONFIG_I3C is not set # CONFIG_SPI is not set # CONFIG_SPMI is not set # CONFIG_HSI is not set # CONFIG_PPS is not set # # PTP clock support # # CONFIG_PTP_1588_CLOCK is not set # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # # end of PTP clock support CONFIG_PINCTRL=y CONFIG_GENERIC_PINCTRL_GROUPS=y CONFIG_PINMUX=y CONFIG_GENERIC_PINMUX_FUNCTIONS=y CONFIG_PINCONF=y CONFIG_GENERIC_PINCONF=y # CONFIG_DEBUG_PINCTRL is not set # CONFIG_PINCTRL_AMD is not set CONFIG_PINCTRL_SINGLE=y # CONFIG_PINCTRL_INGENIC is not set # CONFIG_PINCTRL_OCELOT is not set CONFIG_GPIOLIB=y CONFIG_GPIOLIB_FASTPATH_LIMIT=512 CONFIG_OF_GPIO=y CONFIG_GPIOLIB_IRQCHIP=y # CONFIG_DEBUG_GPIO is not set CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC=y # # Memory mapped GPIO drivers # # CONFIG_GPIO_74XX_MMIO is not set # CONFIG_GPIO_ALTERA is not set CONFIG_GPIO_ATH79=y # CONFIG_GPIO_CADENCE is not set # CONFIG_GPIO_DWAPB is not set # CONFIG_GPIO_FTGPIO010 is not set # CONFIG_GPIO_GENERIC_PLATFORM is not set # CONFIG_GPIO_GRGPIO is not set # CONFIG_GPIO_HLWD is not set # CONFIG_GPIO_MB86S7X is not set # CONFIG_GPIO_SAMA5D2_PIOBU is not set # CONFIG_GPIO_SYSCON is not set # CONFIG_GPIO_XILINX is not set # CONFIG_GPIO_AMD_FCH is not set # end of Memory mapped GPIO drivers # # MFD GPIO expanders # # end of MFD GPIO expanders # CONFIG_GPIO_MOCKUP is not set # CONFIG_W1 is not set # CONFIG_POWER_AVS is not set # CONFIG_POWER_RESET is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_CORE is not set # CONFIG_WATCHDOG_NOWAYOUT is not set # CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is not set # CONFIG_WATCHDOG_SYSFS is not set # # Watchdog Pretimeout Governors # # # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set # CONFIG_GPIO_WATCHDOG is not set # CONFIG_XILINX_WATCHDOG is not set # CONFIG_CADENCE_WATCHDOG is not set # CONFIG_DW_WATCHDOG is not set # CONFIG_MAX63XX_WATCHDOG is not set CONFIG_ATH79_WDT=y # CONFIG_IMGPDC_WDT is not set # CONFIG_MEN_A21_WDT is not set CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set CONFIG_BCMA_POSSIBLE=y # CONFIG_BCMA is not set # # Multifunction device drivers # # CONFIG_MFD_ATMEL_FLEXCOM is not set # CONFIG_MFD_ATMEL_HLCDC is not set # CONFIG_MFD_MADERA is not set # CONFIG_MFD_HI6421_PMIC is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_KEMPLD is not set # CONFIG_MFD_MT6397 is not set # CONFIG_MFD_SM501 is not set # CONFIG_ABX500_CORE is not set CONFIG_MFD_SYSCON=y # CONFIG_MFD_TI_AM335X_TSCADC is not set # CONFIG_MFD_TQMX86 is not set # end of Multifunction device drivers CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set CONFIG_REGULATOR_FIXED_VOLTAGE=y # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_ANATOP is not set # CONFIG_REGULATOR_GPIO is not set # CONFIG_REGULATOR_VCTRL is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_DRM is not set # CONFIG_DRM_DP_CEC is not set # # ARM devices # # end of ARM devices # # ACP (Audio CoProcessor) Configuration # # end of ACP (Audio CoProcessor) Configuration # # Frame buffer Devices # # CONFIG_FB is not set # end of Frame buffer Devices # # Backlight & LCD device support # CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=m CONFIG_BACKLIGHT_GENERIC=m # CONFIG_BACKLIGHT_PM8941_WLED is not set # CONFIG_BACKLIGHT_GPIO is not set # end of Backlight & LCD device support # end of Graphics support # CONFIG_SOUND is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # # USB port drivers # # # USB Physical Layer drivers # # CONFIG_NOP_USB_XCEIV is not set # CONFIG_USB_GPIO_VBUS is not set # end of USB Physical Layer drivers # CONFIG_USB_GADGET is not set # CONFIG_TYPEC is not set # CONFIG_USB_ROLE_SWITCH is not set # CONFIG_USB_LED_TRIG is not set # CONFIG_USB_ULPI_BUS is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # CONFIG_LEDS_CLASS_FLASH is not set CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y # # LED drivers # # CONFIG_LEDS_BCM6328 is not set # CONFIG_LEDS_BCM6358 is not set CONFIG_LEDS_GPIO=y # CONFIG_LEDS_REGULATOR is not set # CONFIG_LEDS_LT3593 is not set # # LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) # # CONFIG_LEDS_SYSCON is not set # CONFIG_LEDS_MLXREG is not set # CONFIG_LEDS_USER is not set # # LED Triggers # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y # CONFIG_LEDS_TRIGGER_ONESHOT is not set # CONFIG_LEDS_TRIGGER_MTD is not set # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_CPU is not set # CONFIG_LEDS_TRIGGER_ACTIVITY is not set # CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # iptables trigger is under Netfilter config (LED target) # # CONFIG_LEDS_TRIGGER_TRANSIENT is not set # CONFIG_LEDS_TRIGGER_CAMERA is not set # CONFIG_LEDS_TRIGGER_PANIC is not set CONFIG_LEDS_TRIGGER_NETDEV=y # CONFIG_LEDS_TRIGGER_PATTERN is not set # CONFIG_LEDS_TRIGGER_AUDIO is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # # DMABUF options # # CONFIG_SYNC_FILE is not set # end of DMABUF options # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_VIRT_DRIVERS is not set CONFIG_VIRTIO_MENU=y # CONFIG_VIRTIO_MMIO is not set # # Microsoft Hyper-V guest support # # end of Microsoft Hyper-V guest support CONFIG_STAGING=y # CONFIG_COMEDI is not set # CONFIG_RTLLIB is not set # # Speakup console speech # # end of Speakup console speech # CONFIG_STAGING_MEDIA is not set # # Android # # end of Android # CONFIG_STAGING_BOARD is not set # CONFIG_GS_FPGABOOT is not set # CONFIG_UNISYSSPAR is not set # CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set # CONFIG_GREYBUS is not set # # Gasket devices # # end of Gasket devices # CONFIG_XIL_AXIS_FIFO is not set # CONFIG_EROFS_FS is not set # CONFIG_FIELDBUS_DEV is not set # CONFIG_MIPS_PLATFORM_DEVICES is not set # CONFIG_GOLDFISH is not set CONFIG_CLKDEV_LOOKUP=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y # # Common Clock Framework # # CONFIG_CLK_HSDK is not set # CONFIG_COMMON_CLK_FIXED_MMIO is not set # CONFIG_COMMON_CLK_BOSTON is not set # # Ingenic JZ47xx CGU drivers # # CONFIG_INGENIC_CGU_JZ4740 is not set # CONFIG_INGENIC_CGU_JZ4725B is not set # CONFIG_INGENIC_CGU_JZ4770 is not set # CONFIG_INGENIC_CGU_JZ4780 is not set # end of Ingenic JZ47xx CGU drivers # end of Common Clock Framework # CONFIG_HWSPINLOCK is not set # # Clock Source drivers # # end of Clock Source drivers # CONFIG_MAILBOX is not set # CONFIG_IOMMU_SUPPORT is not set # # Remoteproc drivers # # CONFIG_REMOTEPROC is not set # end of Remoteproc drivers # # Rpmsg drivers # # CONFIG_RPMSG_VIRTIO is not set # end of Rpmsg drivers # CONFIG_SOUNDWIRE is not set # # SOC (System On Chip) specific Drivers # # # Amlogic SoC drivers # # end of Amlogic SoC drivers # # Aspeed SoC drivers # # end of Aspeed SoC drivers # # Broadcom SoC drivers # # end of Broadcom SoC drivers # # NXP/Freescale QorIQ SoC drivers # # end of NXP/Freescale QorIQ SoC drivers # # i.MX SoC drivers # # end of i.MX SoC drivers # # IXP4xx SoC drivers # # CONFIG_IXP4XX_QMGR is not set # CONFIG_IXP4XX_NPE is not set # end of IXP4xx SoC drivers # # Qualcomm SoC drivers # # end of Qualcomm SoC drivers # CONFIG_SOC_TI is not set # # Xilinx SoC drivers # # CONFIG_XILINX_VCU is not set # end of Xilinx SoC drivers # end of SOC (System On Chip) specific Drivers # CONFIG_PM_DEVFREQ is not set # CONFIG_EXTCON is not set # CONFIG_MEMORY is not set # CONFIG_IIO is not set # CONFIG_PWM is not set # # IRQ chip support # CONFIG_IRQCHIP=y CONFIG_ARM_GIC_MAX_NR=1 CONFIG_IRQ_MIPS_CPU=y # end of IRQ chip support # CONFIG_IPACK_BUS is not set CONFIG_ARCH_HAS_RESET_CONTROLLER=y CONFIG_RESET_CONTROLLER=y CONFIG_RESET_ATH79=y # CONFIG_RESET_TI_SYSCON is not set # CONFIG_FMC is not set # # PHY Subsystem # CONFIG_GENERIC_PHY=y # CONFIG_BCM_KONA_USB2_PHY is not set # CONFIG_PHY_CADENCE_DP is not set # CONFIG_PHY_CADENCE_DPHY is not set # CONFIG_PHY_CADENCE_SIERRA is not set # CONFIG_PHY_FSL_IMX8MQ_USB is not set # CONFIG_PHY_PXA_28NM_HSIC is not set # CONFIG_PHY_PXA_28NM_USB2 is not set # CONFIG_PHY_MAPPHONE_MDM6600 is not set # CONFIG_PHY_OCELOT_SERDES is not set # CONFIG_PHY_ATH79_USB is not set # end of PHY Subsystem # CONFIG_POWERCAP is not set # CONFIG_MCB is not set # CONFIG_RAS is not set # # Android # # CONFIG_ANDROID is not set # end of Android # CONFIG_DAX is not set # CONFIG_NVMEM is not set # # HW tracing support # # CONFIG_STM is not set # CONFIG_INTEL_TH is not set # end of HW tracing support # CONFIG_FPGA is not set # CONFIG_FSI is not set # CONFIG_SIOX is not set # CONFIG_SLIMBUS is not set # CONFIG_INTERCONNECT is not set # CONFIG_COUNTER is not set # end of Device Drivers # # File systems # CONFIG_VALIDATE_FS_PARSER=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set # CONFIG_F2FS_FS is not set CONFIG_EXPORTFS=y # CONFIG_EXPORTFS_BLOCK_OPS is not set CONFIG_FILE_LOCKING=y # CONFIG_MANDATORY_FILE_LOCKING is not set # CONFIG_FS_ENCRYPTION is not set CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY_USER=y # CONFIG_FANOTIFY is not set # CONFIG_QUOTA is not set CONFIG_AUTOFS4_FS=y CONFIG_AUTOFS_FS=y # CONFIG_FUSE_FS is not set # CONFIG_OVERLAY_FS is not set # # Caches # # CONFIG_FSCACHE is not set # end of Caches # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # end of CD-ROM/DVD Filesystems # # DOS/FAT/NT Filesystems # # CONFIG_MSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # end of DOS/FAT/NT Filesystems # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y # CONFIG_PROC_PAGE_MONITOR is not set # CONFIG_PROC_CHILDREN is not set CONFIG_KERNFS=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_TMPFS_XATTR=y CONFIG_MEMFD_CREATE=y # CONFIG_CONFIGFS_FS is not set # end of Pseudo filesystems CONFIG_MISC_FILESYSTEMS=y # CONFIG_ORANGEFS_FS is not set # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX6FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_PSTORE is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V2 is not set CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_SWAP is not set CONFIG_NFS_V4_1=y CONFIG_NFS_V4_2=y CONFIG_PNFS_FILE_LAYOUT=y CONFIG_PNFS_FLEXFILE_LAYOUT=m CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" # CONFIG_NFS_V4_1_MIGRATION is not set CONFIG_ROOT_NFS=y # CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=y # CONFIG_NFSD is not set CONFIG_GRACE_PERIOD=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_BACKCHANNEL=y # CONFIG_SUNRPC_DEBUG is not set # CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # CONFIG_NLS is not set # CONFIG_UNICODE is not set # end of File systems # # Security options # CONFIG_KEYS=y # CONFIG_PERSISTENT_KEYRINGS is not set # CONFIG_BIG_KEYS is not set # CONFIG_ENCRYPTED_KEYS is not set # CONFIG_KEY_DH_OPERATIONS is not set CONFIG_SECURITY_DMESG_RESTRICT=y # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y CONFIG_HARDENED_USERCOPY=y CONFIG_HARDENED_USERCOPY_FALLBACK=y # CONFIG_HARDENED_USERCOPY_PAGESPAN is not set # CONFIG_STATIC_USERMODEHELPER is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_LSM="yama,loadpin,safesetid,integrity" # # Kernel hardening options # # # Memory initialization # CONFIG_INIT_STACK_NONE=y # end of Memory initialization # end of Kernel hardening options # end of Security options CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_RNG2=y # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_USER is not set # CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set # # Public-key cryptography # # CONFIG_CRYPTO_RSA is not set # CONFIG_CRYPTO_DH is not set # CONFIG_CRYPTO_ECDH is not set # CONFIG_CRYPTO_ECRDSA is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_CHACHA20POLY1305 is not set # CONFIG_CRYPTO_AEGIS128 is not set # CONFIG_CRYPTO_AEGIS128L is not set # CONFIG_CRYPTO_AEGIS256 is not set # CONFIG_CRYPTO_MORUS640 is not set # CONFIG_CRYPTO_MORUS1280 is not set # CONFIG_CRYPTO_SEQIV is not set # CONFIG_CRYPTO_ECHAINIV is not set # # Block modes # # CONFIG_CRYPTO_CBC is not set # CONFIG_CRYPTO_CFB is not set # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_OFB is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_KEYWRAP is not set # CONFIG_CRYPTO_ADIANTUM is not set # # Hash modes # # CONFIG_CRYPTO_CMAC is not set # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CRC32 is not set # CONFIG_CRYPTO_CRCT10DIF is not set # CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_POLY1305 is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_SHA3 is not set # CONFIG_CRYPTO_SM3 is not set # CONFIG_CRYPTO_STREEBOG is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_TI is not set # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_CHACHA20 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_SM4 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # # Compression # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_842 is not set # CONFIG_CRYPTO_LZ4 is not set # CONFIG_CRYPTO_LZ4HC is not set # CONFIG_CRYPTO_ZSTD is not set # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_DRBG_MENU is not set # CONFIG_CRYPTO_JITTERENTROPY is not set # CONFIG_CRYPTO_USER_API_HASH is not set # CONFIG_CRYPTO_USER_API_SKCIPHER is not set # CONFIG_CRYPTO_USER_API_RNG is not set # CONFIG_CRYPTO_USER_API_AEAD is not set # CONFIG_CRYPTO_HW is not set # CONFIG_ASYMMETRIC_KEY_TYPE is not set # # Certificates for signature checking # # CONFIG_SYSTEM_BLACKLIST_KEYRING is not set # end of Certificates for signature checking CONFIG_BINARY_PRINTF=y # # Library routines # # CONFIG_PACKING is not set CONFIG_BITREVERSE=y CONFIG_GENERIC_NET_UTILS=y # CONFIG_CORDIC is not set CONFIG_RATIONAL=y CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_IOMAP=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set # CONFIG_CRC32_SLICEBY8 is not set # CONFIG_CRC32_SLICEBY4 is not set CONFIG_CRC32_SARWATE=y # CONFIG_CRC32_BIT is not set # CONFIG_CRC64 is not set # CONFIG_CRC4 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set # CONFIG_CRC8 is not set # CONFIG_RANDOM32_SELFTEST is not set CONFIG_XZ_DEC=y # CONFIG_XZ_DEC_X86 is not set # CONFIG_XZ_DEC_POWERPC is not set # CONFIG_XZ_DEC_IA64 is not set # CONFIG_XZ_DEC_ARM is not set # CONFIG_XZ_DEC_ARMTHUMB is not set # CONFIG_XZ_DEC_SPARC is not set # CONFIG_XZ_DEC_TEST is not set CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y CONFIG_HAS_DMA=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_DMA_DECLARE_COHERENT=y CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y CONFIG_ARCH_HAS_DMA_MMAP_PGPROT=y CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y # CONFIG_DMA_API_DEBUG is not set CONFIG_DQL=y CONFIG_GLOB=y # CONFIG_GLOB_SELFTEST is not set CONFIG_NLATTR=y CONFIG_GENERIC_ATOMIC64=y # CONFIG_DDR is not set # CONFIG_IRQ_POLL is not set CONFIG_LIBFDT=y CONFIG_OID_REGISTRY=y CONFIG_FONT_SUPPORT=y CONFIG_FONT_8x16=y CONFIG_FONT_AUTOSELECT=y CONFIG_SBITMAP=y # CONFIG_STRING_SELFTEST is not set # end of Library routines CONFIG_GENERIC_LIB_ASHLDI3=y CONFIG_GENERIC_LIB_ASHRDI3=y CONFIG_GENERIC_LIB_LSHRDI3=y CONFIG_GENERIC_LIB_CMPDI2=y CONFIG_GENERIC_LIB_UCMPDI2=y # # Kernel hacking # # # printk and dmesg options # CONFIG_PRINTK_TIME=y # CONFIG_PRINTK_CALLER is not set CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_CONSOLE_LOGLEVEL_QUIET=4 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 # CONFIG_BOOT_PRINTK_DELAY is not set CONFIG_DYNAMIC_DEBUG=y # end of printk and dmesg options # # Compile-time checks and compiler options # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 CONFIG_STRIP_ASM_SYMS=y # CONFIG_READABLE_ASM is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_OPTIMIZE_INLINING is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set CONFIG_SECTION_MISMATCH_WARN_ONLY=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # end of Compile-time checks and compiler options CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x10 # CONFIG_MAGIC_SYSRQ_SERIAL is not set CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MISC=y # # Memory Debugging # # CONFIG_PAGE_EXTENSION is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_PAGE_OWNER is not set # CONFIG_PAGE_POISONING is not set # CONFIG_DEBUG_PAGE_REF is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_MEMORY_INIT is not set CONFIG_HAVE_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACKOVERFLOW is not set CONFIG_KASAN_STACK=1 # end of Memory Debugging CONFIG_CC_HAS_SANCOV_TRACE_PC=y # CONFIG_DEBUG_SHIRQ is not set # # Debug Lockups and Hangs # CONFIG_LOCKUP_DETECTOR=y CONFIG_SOFTLOCKUP_DETECTOR=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_DETECT_HUNG_TASK=y CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_WQ_WATCHDOG=y # end of Debug Lockups and Hangs CONFIG_PANIC_ON_OOPS=y CONFIG_PANIC_ON_OOPS_VALUE=1 CONFIG_PANIC_TIMEOUT=1 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set CONFIG_SCHED_STACK_END_CHECK=y # CONFIG_DEBUG_TIMEKEEPING is not set CONFIG_DEBUG_PREEMPT=y # # Lock Debugging (spinlocks, mutexes, etc...) # CONFIG_LOCK_DEBUGGING_SUPPORT=y # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_DEBUG_ATOMIC_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_LOCK_TORTURE_TEST is not set # CONFIG_WW_MUTEX_SELFTEST is not set # end of Lock Debugging (spinlocks, mutexes, etc...) CONFIG_STACKTRACE=y # CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_PLIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set # # RCU Debugging # # CONFIG_RCU_PERF_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_RCU_CPU_STALL_TIMEOUT=21 # CONFIG_RCU_TRACE is not set # CONFIG_RCU_EQS_DEBUG is not set # end of RCU Debugging # CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_NOTIFIER_ERROR_INJECTION is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACE_CLOCK=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y CONFIG_FUNCTION_TRACER=y CONFIG_FUNCTION_GRAPH_TRACER=y # CONFIG_PREEMPTIRQ_EVENTS is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_HWLAT_TRACER is not set # CONFIG_FTRACE_SYSCALLS is not set # CONFIG_TRACER_SNAPSHOT is not set CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_DYNAMIC_FTRACE=y # CONFIG_FUNCTION_PROFILER is not set CONFIG_FTRACE_MCOUNT_RECORD=y # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_TRACEPOINT_BENCHMARK is not set # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_RING_BUFFER_STARTUP_TEST is not set # CONFIG_PREEMPTIRQ_DELAY_TEST is not set # CONFIG_TRACE_EVAL_MAP_FILE is not set CONFIG_RUNTIME_TESTING_MENU=y # CONFIG_LKDTM is not set # CONFIG_TEST_LIST_SORT is not set # CONFIG_TEST_SORT is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_RBTREE_TEST is not set # CONFIG_INTERVAL_TREE_TEST is not set # CONFIG_PERCPU_TEST is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_TEST_HEXDUMP is not set # CONFIG_TEST_STRING_HELPERS is not set # CONFIG_TEST_STRSCPY is not set # CONFIG_TEST_KSTRTOX is not set # CONFIG_TEST_PRINTF is not set # CONFIG_TEST_BITMAP is not set # CONFIG_TEST_BITFIELD is not set # CONFIG_TEST_UUID is not set # CONFIG_TEST_XARRAY is not set # CONFIG_TEST_OVERFLOW is not set # CONFIG_TEST_RHASHTABLE is not set # CONFIG_TEST_HASH is not set # CONFIG_TEST_IDA is not set # CONFIG_TEST_LKM is not set # CONFIG_TEST_VMALLOC is not set # CONFIG_TEST_USER_COPY is not set # CONFIG_TEST_BPF is not set # CONFIG_FIND_BIT_BENCHMARK is not set # CONFIG_TEST_FIRMWARE is not set # CONFIG_TEST_SYSCTL is not set # CONFIG_TEST_UDELAY is not set # CONFIG_TEST_STATIC_KEYS is not set # CONFIG_TEST_KMOD is not set # CONFIG_TEST_MEMCAT_P is not set # CONFIG_TEST_STACKINIT is not set # CONFIG_MEMTEST is not set # CONFIG_BUG_ON_DATA_CORRUPTION is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y # CONFIG_UBSAN is not set CONFIG_UBSAN_ALIGNMENT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_EARLY_PRINTK=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_DEBUG_ZBOOT is not set # CONFIG_SPINLOCK_TEST is not set # CONFIG_SCACHE_DEBUGFS is not set # end of Kernel hacking ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: MIPS: ath79: regression after patch: sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set 2019-06-17 5:39 ` Oleksij Rempel @ 2019-06-17 13:01 ` Yafang Shao 2019-06-17 13:12 ` Oleksij Rempel 0 siblings, 1 reply; 11+ messages in thread From: Yafang Shao @ 2019-06-17 13:01 UTC (permalink / raw) To: Oleksij Rempel; +Cc: Steven Rostedt, linux-mips, kernel On Mon, Jun 17, 2019 at 1:39 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > On Mon, Jun 17, 2019 at 10:04:46AM +0800, Yafang Shao wrote: > > On Fri, Jun 14, 2019 at 4:34 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > On Fri, Jun 14, 2019 at 01:56:04PM +0800, Yafang Shao wrote: > > > > On Fri, Jun 14, 2019 at 12:02 AM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > > > On Thu, Jun 13, 2019 at 04:12:57PM +0800, Yafang Shao wrote: > > > > > > On Thu, Jun 13, 2019 at 4:08 PM Yafang Shao <laoar.shao@gmail.com> wrote: > > > > > > > > > > > > > > On Thu, Jun 13, 2019 at 2:30 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > After patch: > > > > > > > > ----------------------------------------------------- > > > > > > > > commit 2a09b5de235a6b5f76193a2ed46546a2944f98bf > > > > > > > > Author: Yafang Shao <laoar.shao@gmail.com> > > > > > > > > Date: Tue Mar 26 20:13:10 2019 +0800 > > > > > > > > sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set > > > > > > > > > > > > > > > > The tracepoints trace_sched_stat_{iowait, blocked, wait, sleep} should > > > > > > > > be not exposed to user if CONFIG_SCHEDSTATS is not set. > > > > > > > > > > > > > > > > Link: http://lkml.kernel.org/r/1553602391-11926-3-git-send-email-laoar.shao@gmail.com > > > > > > > > > > > > > > > > Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > > > > > > Signed-off-by: Yafang Shao <laoar.shao@gmail.com> > > > > > > > > Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> > > > > > > > > ----------------------------------------------------- > > > > > > > > > > > > > > > > i can't boot kernel on MIPS based system Atheros ar9331. The boot > > > > > > > > process ends with following oops: > > > > > > > > ----------------------------------------------------- > > > > > > > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [0/1518] > > > > > > > > [ 0.000000] Kernel command line: ip=dhcp root=/dev/nfs nfsroot=192.168.23.4:/home/ore/nfsroot/dpt-module,v3,tcp > > > > > > > > [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > > > > > > > > [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > > > > > > > > [ 0.000000] Writing ErrCtl register=00000000 > > > > > > > > [ 0.000000] Readback ErrCtl register=00000000 > > > > > > > > [ 0.000000] Memory: 56376K/65536K available (5376K kernel code, 437K rwdata, 1068K rodata, 1432K init, 214K bss, 9160K reserved, 0K cma-reserved) > > > > > > > > [ 0.000000] random: get_random_u32 called from cache_random_seq_create+0x9c/0x170 with crng_init=0 > > > > > > > > [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > > > > > > > [ 0.000000] ftrace: allocating 18167 entries in 36 pages > > > > > > > > [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 00000000 > > > > > > > > [ 0.000000] Oops[#1]: > > > > > > > > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc4+ #308 > > > > > > > > [ 0.000000] $ 0 : 00000000 8007e5fc 00000003 00000002 > > > > > > > > [ 0.000000] $ 4 : 00000001 00000000 00000000 83c22470 > > > > > > > > [ 0.000000] $ 8 : 00000000 00000000 00000000 00000000 > > > > > > > > [ 0.000000] $12 : 806afe04 00000000 00000001 00000000 > > > > > > > > [ 0.000000] $16 : 800adc0c 800adc00 00000000 00000000 > > > > > > > > [ 0.000000] $20 : 00000000 0000048e 00000000 806c0000 > > > > > > > > [ 0.000000] $24 : 00000003 800619e4 > > > > > > > > [ 0.000000] $28 : 806ae000 806afe10 808b0000 00000000 > > > > > > > > [ 0.000000] Hi : 00000000 > > > > > > > > [ 0.000000] Lo : 00000000 > > > > > > > > [ 0.000000] epc : 00000000 0x0 > > > > > > > > [ 0.000000] ra : 00000000 0x0 > > > > > > > > [ 0.000000] Status: 10000002 KERNEL EXL > > > > > > > > [ 0.000000] Cause : 10800008 (ExcCode 02) > > > > > > > > [ 0.000000] BadVA : 00000000 > > > > > > > > [ 0.000000] PrId : 00019374 (MIPS 24Kc) > > > > > > > > [ 0.000000] Modules linked in: > > > > > > > > [ 0.000000] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000) > > > > > > > > [ 0.000000] Stack : 00000002 8007e784 806ca284 00000000 800adc0c 00000000 80070eb0 8007108c > > > > > > > > [ 0.000000] 83c03c00 801ab7d8 83c03b80 00000000 00000000 83c03b80 00000000 801109cc > > > > > > > > [ 0.000000] 00000001 80880000 80880000 800c1318 00000000 ffffffff 806b0000 806b0000 > > > > > > > > [ 0.000000] 83c22470 0000048e 8075eb00 807706dc 806b0000 80753158 806b0000 80755209 > > > > > > > > [ 0.000000] 00000001 80880000 80880000 80726cc8 ffffffff 000046f7 00000024 00000003 > > > > > > > > [ 0.000000] ... > > > > > > > > [ 0.000000] Call Trace: > > > > > > > > [ 0.000000] > > > > > > > > [ 0.000000] [<8007e784>] r4k_flush_icache_range+0x10/0x18 > > > > > > > > [ 0.000000] [<800adc0c>] preempt_count_sub+0x10/0xe4 > > > > > > > > [ 0.000000] [<80070eb0>] ftrace_caller+0x0/0x54 > > > > > > > > [ 0.000000] [<8007108c>] ftrace_make_nop+0x8c/0x94 > > > > > > > > [ 0.000000] [<801ab7d8>] __get_free_pages+0x2c/0x60 > > > > > > > > [ 0.000000] [<801109cc>] ftrace_process_locs+0x364/0x3ec > > > > > > > > [ 0.000000] [<800c1318>] vprintk_default+0x34/0x40 > > > > > > > > [ 0.000000] [<80726cc8>] ftrace_init+0xb8/0x138 > > > > > > > > [ 0.000000] [<8071ac98>] start_kernel+0x290/0x584 > > > > > > > > [ 0.000000] [<8071a368>] unknown_bootoption+0x0/0x270 > > > > > > > > [ 0.000000] > > > > > > > > [ 0.000000] Code: (Bad address in epc) > > > > > > > > [ 0.000000] > > > > > > > > [ 0.000000] ---[ end trace 64e6fa591c4a277c ]--- > > > > > > > > [ 0.000000] Kernel panic - not syncing: Fatal exception > > > > > > > > [ 0.000000] Rebooting in > > > > > > > > ----------------------------------------------------- > > > > > > > > > > > > > > > > After reverting this patch I can normally boot the kernel. > > > > > > > > The kernel is build with CONFIG_SCHEDSTATS not set. > > > > > > > > > > > > > > > > -- > > > > > > > > Pengutronix e.K. | | > > > > > > > > Industrial Linux Solutions | http://www.pengutronix.de/ | > > > > > > > > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > > > > > > > > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > > > > > > > > > > > > > Hi Oleksij, > > > > > > > > > > > > > > This really makes me confused. > > > > > > > If CONFIG_SCHEDSTATS is not set, trace_sched_stat_{iowait, blocked, > > > > > > > wait, sleep} will be optimized out by > > > > > > > the compiler. That should not effect other codes. > > > > > > > > > > > > > > Would you pls. try bellow command on your build server? > > > > > > > $ objdump -dr kernel/sched/fair.o | awk '/>:$/ { F=$2 } /sched_stat/ { > > > > > > > print F " " $0 }' > > > > > > > > > > > > > > > > > > > Plus, could you pls. show me the difference on the objdump of these > > > > > > two vmlinux (with and without my patch) ? > > > > > > > > > > Both files are in attachment. > > > > > > > > > > > > > Hi Oleksij, > > > > > > > > Unfortunately I don't have a mips toolchain on hand. > > > > It would be better if you could give me the disassembled code of > > > > these two vmlinuxs. > > > > I will try to build a cross toolchain for MIPS 24Kc, that may take some time. > > > > > > disassembled code is in attachment. > > > > > > -- > > > > + Steve, > > > > Hi Oleksij, > > > > I guess this issue is related with __mcount_loc, but I don't have a > > clear idea how to fix it yet. > > It would be better if you could share your .config file as well. > > > > Hi Steve, > > > > Do you have any suggestion on this issue? > > My guess is when we define a tracepoint as nop, there's something > > wrong in __mcount_loc, > > which will be used by MIPS and then this oops occurs. > > kernel config is in attachment. > Hi Oleksij, What is the output of "ftrace: allocating %ld entries in %ld pages" after revert this patch ? I want to know whether this issue is related with the number of ftrace entries, e.g, whehter more pages are allocated after this patch is reverted. In this oops messages, the output is "ftrace: allocating 18167 entries in 36 pages". Thanks Yafang ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: MIPS: ath79: regression after patch: sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set 2019-06-17 13:01 ` Yafang Shao @ 2019-06-17 13:12 ` Oleksij Rempel 2019-06-20 11:28 ` Yafang Shao 0 siblings, 1 reply; 11+ messages in thread From: Oleksij Rempel @ 2019-06-17 13:12 UTC (permalink / raw) To: Yafang Shao; +Cc: Steven Rostedt, linux-mips, kernel On Mon, Jun 17, 2019 at 09:01:50PM +0800, Yafang Shao wrote: > On Mon, Jun 17, 2019 at 1:39 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > On Mon, Jun 17, 2019 at 10:04:46AM +0800, Yafang Shao wrote: > > > On Fri, Jun 14, 2019 at 4:34 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > On Fri, Jun 14, 2019 at 01:56:04PM +0800, Yafang Shao wrote: > > > > > On Fri, Jun 14, 2019 at 12:02 AM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > > > > > On Thu, Jun 13, 2019 at 04:12:57PM +0800, Yafang Shao wrote: > > > > > > > On Thu, Jun 13, 2019 at 4:08 PM Yafang Shao <laoar.shao@gmail.com> wrote: > > > > > > > > > > > > > > > > On Thu, Jun 13, 2019 at 2:30 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > After patch: > > > > > > > > > ----------------------------------------------------- > > > > > > > > > commit 2a09b5de235a6b5f76193a2ed46546a2944f98bf > > > > > > > > > Author: Yafang Shao <laoar.shao@gmail.com> > > > > > > > > > Date: Tue Mar 26 20:13:10 2019 +0800 > > > > > > > > > sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set > > > > > > > > > > > > > > > > > > The tracepoints trace_sched_stat_{iowait, blocked, wait, sleep} should > > > > > > > > > be not exposed to user if CONFIG_SCHEDSTATS is not set. > > > > > > > > > > > > > > > > > > Link: http://lkml.kernel.org/r/1553602391-11926-3-git-send-email-laoar.shao@gmail.com > > > > > > > > > > > > > > > > > > Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > > > > > > > Signed-off-by: Yafang Shao <laoar.shao@gmail.com> > > > > > > > > > Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> > > > > > > > > > ----------------------------------------------------- > > > > > > > > > > > > > > > > > > i can't boot kernel on MIPS based system Atheros ar9331. The boot > > > > > > > > > process ends with following oops: > > > > > > > > > ----------------------------------------------------- > > > > > > > > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [0/1518] > > > > > > > > > [ 0.000000] Kernel command line: ip=dhcp root=/dev/nfs nfsroot=192.168.23.4:/home/ore/nfsroot/dpt-module,v3,tcp > > > > > > > > > [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > > > > > > > > > [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > > > > > > > > > [ 0.000000] Writing ErrCtl register=00000000 > > > > > > > > > [ 0.000000] Readback ErrCtl register=00000000 > > > > > > > > > [ 0.000000] Memory: 56376K/65536K available (5376K kernel code, 437K rwdata, 1068K rodata, 1432K init, 214K bss, 9160K reserved, 0K cma-reserved) > > > > > > > > > [ 0.000000] random: get_random_u32 called from cache_random_seq_create+0x9c/0x170 with crng_init=0 > > > > > > > > > [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > > > > > > > > [ 0.000000] ftrace: allocating 18167 entries in 36 pages > > > > > > > > > [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 00000000 > > > > > > > > > [ 0.000000] Oops[#1]: > > > > > > > > > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc4+ #308 > > > > > > > > > [ 0.000000] $ 0 : 00000000 8007e5fc 00000003 00000002 > > > > > > > > > [ 0.000000] $ 4 : 00000001 00000000 00000000 83c22470 > > > > > > > > > [ 0.000000] $ 8 : 00000000 00000000 00000000 00000000 > > > > > > > > > [ 0.000000] $12 : 806afe04 00000000 00000001 00000000 > > > > > > > > > [ 0.000000] $16 : 800adc0c 800adc00 00000000 00000000 > > > > > > > > > [ 0.000000] $20 : 00000000 0000048e 00000000 806c0000 > > > > > > > > > [ 0.000000] $24 : 00000003 800619e4 > > > > > > > > > [ 0.000000] $28 : 806ae000 806afe10 808b0000 00000000 > > > > > > > > > [ 0.000000] Hi : 00000000 > > > > > > > > > [ 0.000000] Lo : 00000000 > > > > > > > > > [ 0.000000] epc : 00000000 0x0 > > > > > > > > > [ 0.000000] ra : 00000000 0x0 > > > > > > > > > [ 0.000000] Status: 10000002 KERNEL EXL > > > > > > > > > [ 0.000000] Cause : 10800008 (ExcCode 02) > > > > > > > > > [ 0.000000] BadVA : 00000000 > > > > > > > > > [ 0.000000] PrId : 00019374 (MIPS 24Kc) > > > > > > > > > [ 0.000000] Modules linked in: > > > > > > > > > [ 0.000000] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000) > > > > > > > > > [ 0.000000] Stack : 00000002 8007e784 806ca284 00000000 800adc0c 00000000 80070eb0 8007108c > > > > > > > > > [ 0.000000] 83c03c00 801ab7d8 83c03b80 00000000 00000000 83c03b80 00000000 801109cc > > > > > > > > > [ 0.000000] 00000001 80880000 80880000 800c1318 00000000 ffffffff 806b0000 806b0000 > > > > > > > > > [ 0.000000] 83c22470 0000048e 8075eb00 807706dc 806b0000 80753158 806b0000 80755209 > > > > > > > > > [ 0.000000] 00000001 80880000 80880000 80726cc8 ffffffff 000046f7 00000024 00000003 > > > > > > > > > [ 0.000000] ... > > > > > > > > > [ 0.000000] Call Trace: > > > > > > > > > [ 0.000000] > > > > > > > > > [ 0.000000] [<8007e784>] r4k_flush_icache_range+0x10/0x18 > > > > > > > > > [ 0.000000] [<800adc0c>] preempt_count_sub+0x10/0xe4 > > > > > > > > > [ 0.000000] [<80070eb0>] ftrace_caller+0x0/0x54 > > > > > > > > > [ 0.000000] [<8007108c>] ftrace_make_nop+0x8c/0x94 > > > > > > > > > [ 0.000000] [<801ab7d8>] __get_free_pages+0x2c/0x60 > > > > > > > > > [ 0.000000] [<801109cc>] ftrace_process_locs+0x364/0x3ec > > > > > > > > > [ 0.000000] [<800c1318>] vprintk_default+0x34/0x40 > > > > > > > > > [ 0.000000] [<80726cc8>] ftrace_init+0xb8/0x138 > > > > > > > > > [ 0.000000] [<8071ac98>] start_kernel+0x290/0x584 > > > > > > > > > [ 0.000000] [<8071a368>] unknown_bootoption+0x0/0x270 > > > > > > > > > [ 0.000000] > > > > > > > > > [ 0.000000] Code: (Bad address in epc) > > > > > > > > > [ 0.000000] > > > > > > > > > [ 0.000000] ---[ end trace 64e6fa591c4a277c ]--- > > > > > > > > > [ 0.000000] Kernel panic - not syncing: Fatal exception > > > > > > > > > [ 0.000000] Rebooting in > > > > > > > > > ----------------------------------------------------- > > > > > > > > > > > > > > > > > > After reverting this patch I can normally boot the kernel. > > > > > > > > > The kernel is build with CONFIG_SCHEDSTATS not set. > > > > > > > > > > > > > > > > > > -- > > > > > > > > > Pengutronix e.K. | | > > > > > > > > > Industrial Linux Solutions | http://www.pengutronix.de/ | > > > > > > > > > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > > > > > > > > > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > > > > > > > > > > > > > > > Hi Oleksij, > > > > > > > > > > > > > > > > This really makes me confused. > > > > > > > > If CONFIG_SCHEDSTATS is not set, trace_sched_stat_{iowait, blocked, > > > > > > > > wait, sleep} will be optimized out by > > > > > > > > the compiler. That should not effect other codes. > > > > > > > > > > > > > > > > Would you pls. try bellow command on your build server? > > > > > > > > $ objdump -dr kernel/sched/fair.o | awk '/>:$/ { F=$2 } /sched_stat/ { > > > > > > > > print F " " $0 }' > > > > > > > > > > > > > > > > > > > > > > Plus, could you pls. show me the difference on the objdump of these > > > > > > > two vmlinux (with and without my patch) ? > > > > > > > > > > > > Both files are in attachment. > > > > > > > > > > > > > > > > Hi Oleksij, > > > > > > > > > > Unfortunately I don't have a mips toolchain on hand. > > > > > It would be better if you could give me the disassembled code of > > > > > these two vmlinuxs. > > > > > I will try to build a cross toolchain for MIPS 24Kc, that may take some time. > > > > > > > > disassembled code is in attachment. > > > > > > > > -- > > > > > > + Steve, > > > > > > Hi Oleksij, > > > > > > I guess this issue is related with __mcount_loc, but I don't have a > > > clear idea how to fix it yet. > > > It would be better if you could share your .config file as well. > > > > > > Hi Steve, > > > > > > Do you have any suggestion on this issue? > > > My guess is when we define a tracepoint as nop, there's something > > > wrong in __mcount_loc, > > > which will be used by MIPS and then this oops occurs. > > > > kernel config is in attachment. > > > > Hi Oleksij, > > What is the output of "ftrace: allocating %ld entries in %ld pages" > after revert this patch ? > I want to know whether this issue is related with the number of ftrace entries, > e.g, whehter more pages are allocated after this patch is reverted. > > In this oops messages, the output is "ftrace: allocating 18167 entries > in 36 pages". Hi Yafang, [ 0.000000] ftrace: allocating 17948 entries in 36 pages Do you need complete dmesg? Regards, Oleksij -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: MIPS: ath79: regression after patch: sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set 2019-06-17 13:12 ` Oleksij Rempel @ 2019-06-20 11:28 ` Yafang Shao 0 siblings, 0 replies; 11+ messages in thread From: Yafang Shao @ 2019-06-20 11:28 UTC (permalink / raw) To: Oleksij Rempel; +Cc: Steven Rostedt, linux-mips, kernel On Mon, Jun 17, 2019 at 9:12 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > On Mon, Jun 17, 2019 at 09:01:50PM +0800, Yafang Shao wrote: > > On Mon, Jun 17, 2019 at 1:39 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > On Mon, Jun 17, 2019 at 10:04:46AM +0800, Yafang Shao wrote: > > > > On Fri, Jun 14, 2019 at 4:34 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > > > On Fri, Jun 14, 2019 at 01:56:04PM +0800, Yafang Shao wrote: > > > > > > On Fri, Jun 14, 2019 at 12:02 AM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > > > > > > > On Thu, Jun 13, 2019 at 04:12:57PM +0800, Yafang Shao wrote: > > > > > > > > On Thu, Jun 13, 2019 at 4:08 PM Yafang Shao <laoar.shao@gmail.com> wrote: > > > > > > > > > > > > > > > > > > On Thu, Jun 13, 2019 at 2:30 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > After patch: > > > > > > > > > > ----------------------------------------------------- > > > > > > > > > > commit 2a09b5de235a6b5f76193a2ed46546a2944f98bf > > > > > > > > > > Author: Yafang Shao <laoar.shao@gmail.com> > > > > > > > > > > Date: Tue Mar 26 20:13:10 2019 +0800 > > > > > > > > > > sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set > > > > > > > > > > > > > > > > > > > > The tracepoints trace_sched_stat_{iowait, blocked, wait, sleep} should > > > > > > > > > > be not exposed to user if CONFIG_SCHEDSTATS is not set. > > > > > > > > > > > > > > > > > > > > Link: http://lkml.kernel.org/r/1553602391-11926-3-git-send-email-laoar.shao@gmail.com > > > > > > > > > > > > > > > > > > > > Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > > > > > > > > Signed-off-by: Yafang Shao <laoar.shao@gmail.com> > > > > > > > > > > Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> > > > > > > > > > > ----------------------------------------------------- > > > > > > > > > > > > > > > > > > > > i can't boot kernel on MIPS based system Atheros ar9331. The boot > > > > > > > > > > process ends with following oops: > > > > > > > > > > ----------------------------------------------------- > > > > > > > > > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [0/1518] > > > > > > > > > > [ 0.000000] Kernel command line: ip=dhcp root=/dev/nfs nfsroot=192.168.23.4:/home/ore/nfsroot/dpt-module,v3,tcp > > > > > > > > > > [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > > > > > > > > > > [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > > > > > > > > > > [ 0.000000] Writing ErrCtl register=00000000 > > > > > > > > > > [ 0.000000] Readback ErrCtl register=00000000 > > > > > > > > > > [ 0.000000] Memory: 56376K/65536K available (5376K kernel code, 437K rwdata, 1068K rodata, 1432K init, 214K bss, 9160K reserved, 0K cma-reserved) > > > > > > > > > > [ 0.000000] random: get_random_u32 called from cache_random_seq_create+0x9c/0x170 with crng_init=0 > > > > > > > > > > [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > > > > > > > > > [ 0.000000] ftrace: allocating 18167 entries in 36 pages > > > > > > > > > > [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 00000000 > > > > > > > > > > [ 0.000000] Oops[#1]: > > > > > > > > > > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc4+ #308 > > > > > > > > > > [ 0.000000] $ 0 : 00000000 8007e5fc 00000003 00000002 > > > > > > > > > > [ 0.000000] $ 4 : 00000001 00000000 00000000 83c22470 > > > > > > > > > > [ 0.000000] $ 8 : 00000000 00000000 00000000 00000000 > > > > > > > > > > [ 0.000000] $12 : 806afe04 00000000 00000001 00000000 > > > > > > > > > > [ 0.000000] $16 : 800adc0c 800adc00 00000000 00000000 > > > > > > > > > > [ 0.000000] $20 : 00000000 0000048e 00000000 806c0000 > > > > > > > > > > [ 0.000000] $24 : 00000003 800619e4 > > > > > > > > > > [ 0.000000] $28 : 806ae000 806afe10 808b0000 00000000 > > > > > > > > > > [ 0.000000] Hi : 00000000 > > > > > > > > > > [ 0.000000] Lo : 00000000 > > > > > > > > > > [ 0.000000] epc : 00000000 0x0 > > > > > > > > > > [ 0.000000] ra : 00000000 0x0 > > > > > > > > > > [ 0.000000] Status: 10000002 KERNEL EXL > > > > > > > > > > [ 0.000000] Cause : 10800008 (ExcCode 02) > > > > > > > > > > [ 0.000000] BadVA : 00000000 > > > > > > > > > > [ 0.000000] PrId : 00019374 (MIPS 24Kc) > > > > > > > > > > [ 0.000000] Modules linked in: > > > > > > > > > > [ 0.000000] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000) > > > > > > > > > > [ 0.000000] Stack : 00000002 8007e784 806ca284 00000000 800adc0c 00000000 80070eb0 8007108c > > > > > > > > > > [ 0.000000] 83c03c00 801ab7d8 83c03b80 00000000 00000000 83c03b80 00000000 801109cc > > > > > > > > > > [ 0.000000] 00000001 80880000 80880000 800c1318 00000000 ffffffff 806b0000 806b0000 > > > > > > > > > > [ 0.000000] 83c22470 0000048e 8075eb00 807706dc 806b0000 80753158 806b0000 80755209 > > > > > > > > > > [ 0.000000] 00000001 80880000 80880000 80726cc8 ffffffff 000046f7 00000024 00000003 > > > > > > > > > > [ 0.000000] ... > > > > > > > > > > [ 0.000000] Call Trace: > > > > > > > > > > [ 0.000000] > > > > > > > > > > [ 0.000000] [<8007e784>] r4k_flush_icache_range+0x10/0x18 > > > > > > > > > > [ 0.000000] [<800adc0c>] preempt_count_sub+0x10/0xe4 > > > > > > > > > > [ 0.000000] [<80070eb0>] ftrace_caller+0x0/0x54 > > > > > > > > > > [ 0.000000] [<8007108c>] ftrace_make_nop+0x8c/0x94 > > > > > > > > > > [ 0.000000] [<801ab7d8>] __get_free_pages+0x2c/0x60 > > > > > > > > > > [ 0.000000] [<801109cc>] ftrace_process_locs+0x364/0x3ec > > > > > > > > > > [ 0.000000] [<800c1318>] vprintk_default+0x34/0x40 > > > > > > > > > > [ 0.000000] [<80726cc8>] ftrace_init+0xb8/0x138 > > > > > > > > > > [ 0.000000] [<8071ac98>] start_kernel+0x290/0x584 > > > > > > > > > > [ 0.000000] [<8071a368>] unknown_bootoption+0x0/0x270 > > > > > > > > > > [ 0.000000] > > > > > > > > > > [ 0.000000] Code: (Bad address in epc) > > > > > > > > > > [ 0.000000] > > > > > > > > > > [ 0.000000] ---[ end trace 64e6fa591c4a277c ]--- > > > > > > > > > > [ 0.000000] Kernel panic - not syncing: Fatal exception > > > > > > > > > > [ 0.000000] Rebooting in > > > > > > > > > > ----------------------------------------------------- > > > > > > > > > > > > > > > > > > > > After reverting this patch I can normally boot the kernel. > > > > > > > > > > The kernel is build with CONFIG_SCHEDSTATS not set. > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > Pengutronix e.K. | | > > > > > > > > > > Industrial Linux Solutions | http://www.pengutronix.de/ | > > > > > > > > > > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > > > > > > > > > > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > > > > > > > > > > > > > > > > > Hi Oleksij, > > > > > > > > > > > > > > > > > > This really makes me confused. > > > > > > > > > If CONFIG_SCHEDSTATS is not set, trace_sched_stat_{iowait, blocked, > > > > > > > > > wait, sleep} will be optimized out by > > > > > > > > > the compiler. That should not effect other codes. > > > > > > > > > > > > > > > > > > Would you pls. try bellow command on your build server? > > > > > > > > > $ objdump -dr kernel/sched/fair.o | awk '/>:$/ { F=$2 } /sched_stat/ { > > > > > > > > > print F " " $0 }' > > > > > > > > > > > > > > > > > > > > > > > > > Plus, could you pls. show me the difference on the objdump of these > > > > > > > > two vmlinux (with and without my patch) ? > > > > > > > > > > > > > > Both files are in attachment. > > > > > > > > > > > > > > > > > > > Hi Oleksij, > > > > > > > > > > > > Unfortunately I don't have a mips toolchain on hand. > > > > > > It would be better if you could give me the disassembled code of > > > > > > these two vmlinuxs. > > > > > > I will try to build a cross toolchain for MIPS 24Kc, that may take some time. > > > > > > > > > > disassembled code is in attachment. > > > > > > > > > > -- > > > > > > > > + Steve, > > > > > > > > Hi Oleksij, > > > > > > > > I guess this issue is related with __mcount_loc, but I don't have a > > > > clear idea how to fix it yet. > > > > It would be better if you could share your .config file as well. > > > > > > > > Hi Steve, > > > > > > > > Do you have any suggestion on this issue? > > > > My guess is when we define a tracepoint as nop, there's something > > > > wrong in __mcount_loc, > > > > which will be used by MIPS and then this oops occurs. > > > > > > kernel config is in attachment. > > > > > > > Hi Oleksij, > > > > What is the output of "ftrace: allocating %ld entries in %ld pages" > > after revert this patch ? > > I want to know whether this issue is related with the number of ftrace entries, > > e.g, whehter more pages are allocated after this patch is reverted. > > > > In this oops messages, the output is "ftrace: allocating 18167 entries > > in 36 pages". > > Hi Yafang, > > [ 0.000000] ftrace: allocating 17948 entries in 36 pages > > Do you need complete dmesg? > Sorry for the late response. The complete dmesg is not needed for now. With my patch, the number of ftrace entries are 17948. Without my patch, the number of ftrace entries are 18167, which is 219 greater, that seems impossible. Actually my patch can decrease the number of ftrace entries. Are you sure this issue is only related to my patch ? The rcu tracepoint patch [1] also use the TRACE_EVENT_NOP. Are there any different with this patch ? [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=4f5fbd78a7b40bab538ae0d316363530da751e42 Thanks Yafang ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: MIPS: ath79: regression after patch: sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set 2019-06-17 2:04 ` Yafang Shao 2019-06-17 5:39 ` Oleksij Rempel @ 2019-06-26 12:37 ` Steven Rostedt 2019-06-30 5:01 ` Oleksij Rempel 1 sibling, 1 reply; 11+ messages in thread From: Steven Rostedt @ 2019-06-26 12:37 UTC (permalink / raw) To: Yafang Shao; +Cc: Oleksij Rempel, linux-mips, kernel Sorry for the late response, I was on PTO. On Mon, 17 Jun 2019 10:04:46 +0800 Yafang Shao <laoar.shao@gmail.com> wrote: > On Fri, Jun 14, 2019 at 4:34 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > On Fri, Jun 14, 2019 at 01:56:04PM +0800, Yafang Shao wrote: > > > On Fri, Jun 14, 2019 at 12:02 AM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > On Thu, Jun 13, 2019 at 04:12:57PM +0800, Yafang Shao wrote: > > > > > On Thu, Jun 13, 2019 at 4:08 PM Yafang Shao <laoar.shao@gmail.com> wrote: > > > > > > > > > > > > On Thu, Jun 13, 2019 at 2:30 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > After patch: > > > > > > > ----------------------------------------------------- > > > > > > > commit 2a09b5de235a6b5f76193a2ed46546a2944f98bf > > > > > > > Author: Yafang Shao <laoar.shao@gmail.com> > > > > > > > Date: Tue Mar 26 20:13:10 2019 +0800 > > > > > > > sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set > > > > > > > > > > > > > > The tracepoints trace_sched_stat_{iowait, blocked, wait, sleep} should > > > > > > > be not exposed to user if CONFIG_SCHEDSTATS is not set. > > > > > > > > > > > > > > Link: http://lkml.kernel.org/r/1553602391-11926-3-git-send-email-laoar.shao@gmail.com > > > > > > > This commit should not modify the function tracing (mcount) code. Trace events and function tracing are two separate systems, that do not rely on each other. > > > > > > > Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > > > > > Signed-off-by: Yafang Shao <laoar.shao@gmail.com> > > > > > > > Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> > > > > > > > ----------------------------------------------------- > > > > > > > > > > > > > > i can't boot kernel on MIPS based system Atheros ar9331. The boot > > > > > > > process ends with following oops: > > > > > > > ----------------------------------------------------- > > > > > > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [0/1518] > > > > > > > [ 0.000000] Kernel command line: ip=dhcp root=/dev/nfs nfsroot=192.168.23.4:/home/ore/nfsroot/dpt-module,v3,tcp > > > > > > > [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > > > > > > > [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > > > > > > > [ 0.000000] Writing ErrCtl register=00000000 > > > > > > > [ 0.000000] Readback ErrCtl register=00000000 > > > > > > > [ 0.000000] Memory: 56376K/65536K available (5376K kernel code, 437K rwdata, 1068K rodata, 1432K init, 214K bss, 9160K reserved, 0K cma-reserved) > > > > > > > [ 0.000000] random: get_random_u32 called from cache_random_seq_create+0x9c/0x170 with crng_init=0 > > > > > > > [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > > > > > > [ 0.000000] ftrace: allocating 18167 entries in 36 pages > > > > > > > [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 00000000 > > > > > > > [ 0.000000] Oops[#1]: > > > > > > > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc4+ #308 > > > > > > > [ 0.000000] $ 0 : 00000000 8007e5fc 00000003 00000002 > > > > > > > [ 0.000000] $ 4 : 00000001 00000000 00000000 83c22470 > > > > > > > [ 0.000000] $ 8 : 00000000 00000000 00000000 00000000 > > > > > > > [ 0.000000] $12 : 806afe04 00000000 00000001 00000000 > > > > > > > [ 0.000000] $16 : 800adc0c 800adc00 00000000 00000000 > > > > > > > [ 0.000000] $20 : 00000000 0000048e 00000000 806c0000 > > > > > > > [ 0.000000] $24 : 00000003 800619e4 > > > > > > > [ 0.000000] $28 : 806ae000 806afe10 808b0000 00000000 > > > > > > > [ 0.000000] Hi : 00000000 > > > > > > > [ 0.000000] Lo : 00000000 > > > > > > > [ 0.000000] epc : 00000000 0x0 > > > > > > > [ 0.000000] ra : 00000000 0x0 > > > > > > > [ 0.000000] Status: 10000002 KERNEL EXL > > > > > > > [ 0.000000] Cause : 10800008 (ExcCode 02) > > > > > > > [ 0.000000] BadVA : 00000000 > > > > > > > [ 0.000000] PrId : 00019374 (MIPS 24Kc) > > > > > > > [ 0.000000] Modules linked in: > > > > > > > [ 0.000000] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000) > > > > > > > [ 0.000000] Stack : 00000002 8007e784 806ca284 00000000 800adc0c 00000000 80070eb0 8007108c > > > > > > > [ 0.000000] 83c03c00 801ab7d8 83c03b80 00000000 00000000 83c03b80 00000000 801109cc > > > > > > > [ 0.000000] 00000001 80880000 80880000 800c1318 00000000 ffffffff 806b0000 806b0000 > > > > > > > [ 0.000000] 83c22470 0000048e 8075eb00 807706dc 806b0000 80753158 806b0000 80755209 > > > > > > > [ 0.000000] 00000001 80880000 80880000 80726cc8 ffffffff 000046f7 00000024 00000003 > > > > > > > [ 0.000000] ... > > > > > > > [ 0.000000] Call Trace: > > > > > > > [ 0.000000] > > > > > > > [ 0.000000] [<8007e784>] r4k_flush_icache_range+0x10/0x18 > > > > > > > [ 0.000000] [<800adc0c>] preempt_count_sub+0x10/0xe4 > > > > > > > [ 0.000000] [<80070eb0>] ftrace_caller+0x0/0x54 > > > > > > > [ 0.000000] [<8007108c>] ftrace_make_nop+0x8c/0x94 > > > > > > > [ 0.000000] [<801ab7d8>] __get_free_pages+0x2c/0x60 > > > > > > > [ 0.000000] [<801109cc>] ftrace_process_locs+0x364/0x3ec > > > > > > > [ 0.000000] [<800c1318>] vprintk_default+0x34/0x40 > > > > > > > [ 0.000000] [<80726cc8>] ftrace_init+0xb8/0x138 > > > > > > > [ 0.000000] [<8071ac98>] start_kernel+0x290/0x584 > > > > > > > [ 0.000000] [<8071a368>] unknown_bootoption+0x0/0x270 > > > > > > > [ 0.000000] > > > > > > > [ 0.000000] Code: (Bad address in epc) > > > > > > > [ 0.000000] > > > > > > > [ 0.000000] ---[ end trace 64e6fa591c4a277c ]--- > > > > > > > [ 0.000000] Kernel panic - not syncing: Fatal exception > > > > > > > [ 0.000000] Rebooting in > > > > > > > ----------------------------------------------------- > > > > > > > > > > > > > > After reverting this patch I can normally boot the kernel. > > > > > > > The kernel is build with CONFIG_SCHEDSTATS not set. > > > > > > > > > > > > > > -- > > > > > > > Pengutronix e.K. | | > > > > > > > Industrial Linux Solutions | http://www.pengutronix.de/ | > > > > > > > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > > > > > > > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > > > > > > > > > > > Hi Oleksij, > > > > > > > > > > > > This really makes me confused. > > > > > > If CONFIG_SCHEDSTATS is not set, trace_sched_stat_{iowait, blocked, > > > > > > wait, sleep} will be optimized out by > > > > > > the compiler. That should not effect other codes. > > > > > > > > > > > > Would you pls. try bellow command on your build server? > > > > > > $ objdump -dr kernel/sched/fair.o | awk '/>:$/ { F=$2 } /sched_stat/ { > > > > > > print F " " $0 }' > > > > > > > > > > > > > > > > Plus, could you pls. show me the difference on the objdump of these > > > > > two vmlinux (with and without my patch) ? > > > > > > > > Both files are in attachment. > > > > > > > > > > Hi Oleksij, > > > > > > Unfortunately I don't have a mips toolchain on hand. > > > It would be better if you could give me the disassembled code of > > > these two vmlinuxs. > > > I will try to build a cross toolchain for MIPS 24Kc, that may take some time. > > > > disassembled code is in attachment. > > > > -- > > + Steve, > > Hi Oleksij, > > I guess this issue is related with __mcount_loc, but I don't have a > clear idea how to fix it yet. > It would be better if you could share your .config file as well. > > Hi Steve, > > Do you have any suggestion on this issue? > My guess is when we define a tracepoint as nop, there's something > wrong in __mcount_loc, > which will be used by MIPS and then this oops occurs. > Are you positive this is the bad commit? It could be that the problem is someplace else, and this commit just makes the compiler do something slightly different to trigger the issue. Have you tried compiling and booting this commit, make sure it crashes, and then remove the commit: $ git show | patch -p1 -R compile and make sure it boots? -- Steve ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: MIPS: ath79: regression after patch: sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set 2019-06-26 12:37 ` Steven Rostedt @ 2019-06-30 5:01 ` Oleksij Rempel 0 siblings, 0 replies; 11+ messages in thread From: Oleksij Rempel @ 2019-06-30 5:01 UTC (permalink / raw) To: Steven Rostedt; +Cc: Yafang Shao, linux-mips, kernel On Wed, Jun 26, 2019 at 08:37:48AM -0400, Steven Rostedt wrote: Hi, > > Sorry for the late response, I was on PTO. > > On Mon, 17 Jun 2019 10:04:46 +0800 > Yafang Shao <laoar.shao@gmail.com> wrote: > > > On Fri, Jun 14, 2019 at 4:34 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > On Fri, Jun 14, 2019 at 01:56:04PM +0800, Yafang Shao wrote: > > > > On Fri, Jun 14, 2019 at 12:02 AM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > > > On Thu, Jun 13, 2019 at 04:12:57PM +0800, Yafang Shao wrote: > > > > > > On Thu, Jun 13, 2019 at 4:08 PM Yafang Shao <laoar.shao@gmail.com> wrote: > > > > > > > > > > > > > > On Thu, Jun 13, 2019 at 2:30 PM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > After patch: > > > > > > > > ----------------------------------------------------- > > > > > > > > commit 2a09b5de235a6b5f76193a2ed46546a2944f98bf > > > > > > > > Author: Yafang Shao <laoar.shao@gmail.com> > > > > > > > > Date: Tue Mar 26 20:13:10 2019 +0800 > > > > > > > > sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set > > > > > > > > > > > > > > > > The tracepoints trace_sched_stat_{iowait, blocked, wait, sleep} should > > > > > > > > be not exposed to user if CONFIG_SCHEDSTATS is not set. > > > > > > > > > > > > > > > > Link: http://lkml.kernel.org/r/1553602391-11926-3-git-send-email-laoar.shao@gmail.com > > > > > > > > > > This commit should not modify the function tracing (mcount) code. > > Trace events and function tracing are two separate systems, that do not > rely on each other. > > > > > > > > > Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > > > > > > Signed-off-by: Yafang Shao <laoar.shao@gmail.com> > > > > > > > > Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> > > > > > > > > ----------------------------------------------------- > > > > > > > > > > > > > > > > i can't boot kernel on MIPS based system Atheros ar9331. The boot > > > > > > > > process ends with following oops: > > > > > > > > ----------------------------------------------------- > > > > > > > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [0/1518] > > > > > > > > [ 0.000000] Kernel command line: ip=dhcp root=/dev/nfs nfsroot=192.168.23.4:/home/ore/nfsroot/dpt-module,v3,tcp > > > > > > > > [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > > > > > > > > [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > > > > > > > > [ 0.000000] Writing ErrCtl register=00000000 > > > > > > > > [ 0.000000] Readback ErrCtl register=00000000 > > > > > > > > [ 0.000000] Memory: 56376K/65536K available (5376K kernel code, 437K rwdata, 1068K rodata, 1432K init, 214K bss, 9160K reserved, 0K cma-reserved) > > > > > > > > [ 0.000000] random: get_random_u32 called from cache_random_seq_create+0x9c/0x170 with crng_init=0 > > > > > > > > [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > > > > > > > [ 0.000000] ftrace: allocating 18167 entries in 36 pages > > > > > > > > [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 00000000 > > > > > > > > [ 0.000000] Oops[#1]: > > > > > > > > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc4+ #308 > > > > > > > > [ 0.000000] $ 0 : 00000000 8007e5fc 00000003 00000002 > > > > > > > > [ 0.000000] $ 4 : 00000001 00000000 00000000 83c22470 > > > > > > > > [ 0.000000] $ 8 : 00000000 00000000 00000000 00000000 > > > > > > > > [ 0.000000] $12 : 806afe04 00000000 00000001 00000000 > > > > > > > > [ 0.000000] $16 : 800adc0c 800adc00 00000000 00000000 > > > > > > > > [ 0.000000] $20 : 00000000 0000048e 00000000 806c0000 > > > > > > > > [ 0.000000] $24 : 00000003 800619e4 > > > > > > > > [ 0.000000] $28 : 806ae000 806afe10 808b0000 00000000 > > > > > > > > [ 0.000000] Hi : 00000000 > > > > > > > > [ 0.000000] Lo : 00000000 > > > > > > > > [ 0.000000] epc : 00000000 0x0 > > > > > > > > [ 0.000000] ra : 00000000 0x0 > > > > > > > > [ 0.000000] Status: 10000002 KERNEL EXL > > > > > > > > [ 0.000000] Cause : 10800008 (ExcCode 02) > > > > > > > > [ 0.000000] BadVA : 00000000 > > > > > > > > [ 0.000000] PrId : 00019374 (MIPS 24Kc) > > > > > > > > [ 0.000000] Modules linked in: > > > > > > > > [ 0.000000] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000) > > > > > > > > [ 0.000000] Stack : 00000002 8007e784 806ca284 00000000 800adc0c 00000000 80070eb0 8007108c > > > > > > > > [ 0.000000] 83c03c00 801ab7d8 83c03b80 00000000 00000000 83c03b80 00000000 801109cc > > > > > > > > [ 0.000000] 00000001 80880000 80880000 800c1318 00000000 ffffffff 806b0000 806b0000 > > > > > > > > [ 0.000000] 83c22470 0000048e 8075eb00 807706dc 806b0000 80753158 806b0000 80755209 > > > > > > > > [ 0.000000] 00000001 80880000 80880000 80726cc8 ffffffff 000046f7 00000024 00000003 > > > > > > > > [ 0.000000] ... > > > > > > > > [ 0.000000] Call Trace: > > > > > > > > [ 0.000000] > > > > > > > > [ 0.000000] [<8007e784>] r4k_flush_icache_range+0x10/0x18 > > > > > > > > [ 0.000000] [<800adc0c>] preempt_count_sub+0x10/0xe4 > > > > > > > > [ 0.000000] [<80070eb0>] ftrace_caller+0x0/0x54 > > > > > > > > [ 0.000000] [<8007108c>] ftrace_make_nop+0x8c/0x94 > > > > > > > > [ 0.000000] [<801ab7d8>] __get_free_pages+0x2c/0x60 > > > > > > > > [ 0.000000] [<801109cc>] ftrace_process_locs+0x364/0x3ec > > > > > > > > [ 0.000000] [<800c1318>] vprintk_default+0x34/0x40 > > > > > > > > [ 0.000000] [<80726cc8>] ftrace_init+0xb8/0x138 > > > > > > > > [ 0.000000] [<8071ac98>] start_kernel+0x290/0x584 > > > > > > > > [ 0.000000] [<8071a368>] unknown_bootoption+0x0/0x270 > > > > > > > > [ 0.000000] > > > > > > > > [ 0.000000] Code: (Bad address in epc) > > > > > > > > [ 0.000000] > > > > > > > > [ 0.000000] ---[ end trace 64e6fa591c4a277c ]--- > > > > > > > > [ 0.000000] Kernel panic - not syncing: Fatal exception > > > > > > > > [ 0.000000] Rebooting in > > > > > > > > ----------------------------------------------------- > > > > > > > > > > > > > > > > After reverting this patch I can normally boot the kernel. > > > > > > > > The kernel is build with CONFIG_SCHEDSTATS not set. > > > > > > > > > > > > > > > > -- > > > > > > > > Pengutronix e.K. | | > > > > > > > > Industrial Linux Solutions | http://www.pengutronix.de/ | > > > > > > > > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > > > > > > > > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > > > > > > > > > > > > > Hi Oleksij, > > > > > > > > > > > > > > This really makes me confused. > > > > > > > If CONFIG_SCHEDSTATS is not set, trace_sched_stat_{iowait, blocked, > > > > > > > wait, sleep} will be optimized out by > > > > > > > the compiler. That should not effect other codes. > > > > > > > > > > > > > > Would you pls. try bellow command on your build server? > > > > > > > $ objdump -dr kernel/sched/fair.o | awk '/>:$/ { F=$2 } /sched_stat/ { > > > > > > > print F " " $0 }' > > > > > > > > > > > > > > > > > > > Plus, could you pls. show me the difference on the objdump of these > > > > > > two vmlinux (with and without my patch) ? > > > > > > > > > > Both files are in attachment. > > > > > > > > > > > > > Hi Oleksij, > > > > > > > > Unfortunately I don't have a mips toolchain on hand. > > > > It would be better if you could give me the disassembled code of > > > > these two vmlinuxs. > > > > I will try to build a cross toolchain for MIPS 24Kc, that may take some time. > > > > > > disassembled code is in attachment. > > > > > > -- > > > > + Steve, > > > > Hi Oleksij, > > > > I guess this issue is related with __mcount_loc, but I don't have a > > clear idea how to fix it yet. > > It would be better if you could share your .config file as well. > > > > Hi Steve, > > > > Do you have any suggestion on this issue? > > My guess is when we define a tracepoint as nop, there's something > > wrong in __mcount_loc, > > which will be used by MIPS and then this oops occurs. > > > > Are you positive this is the bad commit? It could be that the problem > is someplace else, and this commit just makes the compiler do something > slightly different to trigger the issue. > > Have you tried compiling and booting this commit, make sure it crashes, > and then remove the commit: > > $ git show | patch -p1 -R > > compile and make sure it boots? Yes. here are two logs. With clean 2a09b5de235a and reverted change as you suggested: Loading ELF '/mnt/tftp/ore-linux-dpt-module' Loading devicetree from '/mnt/tftp/ore-oftree-dpt-module' Starting application at 0x80770000, dts 0x837d56e0... [ 0.000000] Linux version 5.1.0-rc3-00018-g2a09b5de235a (ptxdist@ptxdist) (gcc version 8.2.1 20181130 (OSELAS.Toolchai n-2018.12.0 8-20181130)) #411 PREEMPT 2019-06-30T04:43:00+00:00 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] MIPS: machine is DPTechnics DPT-Module [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 80000000 (usable) [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] random: get_random_bytes called from start_kernel+0xc4/0x574 with crng_init=0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: ip=dhcp root=/dev/nfs nfsroot=192.168.23.4:/home/ore/nfsroot/dpt-module,v3,tcp [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 56052K/65536K available (5354K kernel code, 434K rwdata, 1028K rodata, 1432K init, 216K bss, 9484 reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 18021 entries in 36 pages [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 2a8097f4, epc == 2a8097f5, ra == 2a8097f5 [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc3-00018-g2a09b5de235a #411 [ 0.000000] $ 0 : 00000000 8007e42c 00000003 00000002 [ 0.000000] $ 4 : 00000001 00000000 00000000 83c22418 [ 0.000000] $ 8 : 00000000 00000000 00000000 00000000 [ 0.000000] $12 : 8069fe04 00000000 a6c9bf67 4fa04c02 [ 0.000000] $16 : 800ad734 800ad720 00000000 00000000 [ 0.000000] $20 : 00000000 00000483 00000000 806c0000 [ 0.000000] $24 : 00000003 800619cc [ 0.000000] $28 : 8069e000 8069fe10 808a0000 2a8097f5 [ 0.000000] Hi : 00000000 [ 0.000000] Lo : 00000000 [ 0.000000] epc : 2a8097f5 0x2a8097f5 [ 0.000000] ra : 2a8097f5 0x2a8097f5 [ 0.000000] Status: 10000002 KERNEL EXL [ 0.000000] Cause : 10800008 (ExcCode 02) [ 0.000000] BadVA : 2a8097f4 [ 0.000000] PrId : 00019374 (MIPS 24Kc) [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000) [ 0.000000] Stack : 00000002 8007e5b4 806bac04 00000000 800ad734 00000000 80070e80 8007105c [ 0.000000] 83c03c00 8016c818 83c03b80 2a8097f5 00000000 83c03b80 00000000 8010eed8 [ 0.000000] 80870000 80870000 837d06fc 800c0e4c 00000000 800bdaf4 806a0000 806a0000 [ 0.000000] 83c22418 00000483 8074dfa0 8075f934 806a0000 807425f8 806a0000 80744658 [ 0.000000] 80870000 80870000 837d06fc 80716928 00000001 00004665 00000024 00000003 Loading ELF '/mnt/tftp/ore-linux-dpt-module' Loading devicetree from '/mnt/tftp/ore-oftree-dpt-module' Starting application at 0x80770000, dts 0x837d56e0... [ 0.000000] Linux version 5.1.0-rc3-00018-g2a09b5de235a-dirty (ptxdist@ptxdist) (gcc version 8.2.1 20181130 (OSELAS.To olchain-2018.12.0 8-20181130)) #412 PREEMPT 2019-06-30T04:48:15+00:00 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] MIPS: machine is DPTechnics DPT-Module [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 80000000 (usable) [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] random: get_random_bytes called from start_kernel+0xc4/0x574 with crng_init=0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: ip=dhcp root=/dev/nfs nfsroot=192.168.23.4:/home/ore/nfsroot/dpt-module,v3,tcp [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 56052K/65536K available (5355K kernel code, 433K rwdata, 1028K rodata, 1432K init, 216K bss, 9484K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 18021 entries in 36 pages [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 51 [ 0.000000] CPU clock: 400.000 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000014] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.007930] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.092751] pid_max: default: 32768 minimum: 301 [ 0.097865] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.104012] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.112313] *** VALIDATE proc *** [ 0.114679] *** VALIDATE cgroup1 *** [ 0.117862] *** VALIDATE cgroup2 *** [ 0.123410] rcu: Hierarchical SRCU implementation. [ 0.130151] devtmpfs: initialized [ 0.136105] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.145160] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.150868] pinctrl core: initialized pinctrl subsystem [ 0.159475] NET: Registered protocol family 16 [ 0.271281] clocksource: Switched to clocksource MIPS [ 2.310848] NET: Registered protocol family 2 [ 2.316994] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 2.323420] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 2.330190] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 2.336675] TCP: Hash tables configured (established 1024 bind 1024) -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2019-06-30 5:01 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-13 6:30 MIPS: ath79: regression after patch: sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set Oleksij Rempel
2019-06-13 8:08 ` Yafang Shao
2019-06-13 8:12 ` Yafang Shao
[not found] ` <20190613160214.7df3tnfgtexvdy3y@pengutronix.de>
2019-06-14 5:56 ` Yafang Shao
[not found] ` <20190614083419.stgronjpyglnxjbo@pengutronix.de>
2019-06-17 2:04 ` Yafang Shao
2019-06-17 5:39 ` Oleksij Rempel
2019-06-17 13:01 ` Yafang Shao
2019-06-17 13:12 ` Oleksij Rempel
2019-06-20 11:28 ` Yafang Shao
2019-06-26 12:37 ` Steven Rostedt
2019-06-30 5:01 ` Oleksij Rempel
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).