linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Ram Pai <linuxram@us.ibm.com>
To: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	linux-arch@vger.kernel.org, linux-mm@kvack.org, x86@kernel.org,
	linux-doc@vger.kernel.org, linux-kselftest@vger.kernel.org
Cc: benh@kernel.crashing.org, paulus@samba.org, mpe@ellerman.id.au,
	khandual@linux.vnet.ibm.com, aneesh.kumar@linux.vnet.ibm.com,
	bsingharora@gmail.com, dave.hansen@intel.com, hbabu@us.ibm.com,
	linuxram@us.ibm.com, arnd@arndb.de, akpm@linux-foundation.org,
	corbet@lwn.net, mingo@redhat.com
Subject: [RFC v5 02/38] powerpc: Free up four 64K PTE bits in 64K backed HPTE pages
Date: Wed,  5 Jul 2017 14:21:39 -0700	[thread overview]
Message-ID: <1499289735-14220-3-git-send-email-linuxram@us.ibm.com> (raw)
In-Reply-To: <1499289735-14220-1-git-send-email-linuxram@us.ibm.com>

Rearrange 64K PTE bits to  free  up  bits 3, 4, 5  and  6
in the 64K backed HPTE pages. This along with the earlier
patch will  entirely free  up the four bits from 64K PTE.
The bit numbers are  big-endian as defined in the  ISA3.0

This patch  does  the  following change to 64K PTE backed
by 64K HPTE.

H_PAGE_F_SECOND (S) which  occupied  bit  4  moves to the
	second part of the pte to bit 60.
H_PAGE_F_GIX (G,I,X) which  occupied  bit 5, 6 and 7 also
	moves  to  the   second part of the pte to bit 61,
       	62, 63, 64 respectively

since bit 7 is now freed up, we move H_PAGE_BUSY (B) from
bit  9  to  bit  7.

The second part of the PTE will hold
(H_PAGE_F_SECOND|H_PAGE_F_GIX) at bit 60,61,62,63.

Before the patch, the 64K HPTE backed 64k PTE format was
as follows

 0 1 2 3 4  5  6  7  8 9 10...........................63
 : : : : :  :  :  :  : : :                            :
 v v v v v  v  v  v  v v v                            v

,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x| |S |G |I |X |x|B|x|x|x|................|.|.|.|.| <- primary pte
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
| | | | |  |  |  |  | | | | |..................| | | | | <- secondary pte
'_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_'

After the patch, the 64k HPTE backed 64k PTE format is
as follows

 0 1 2 3 4  5  6  7  8 9 10...........................63
 : : : : :  :  :  :  : : :                            :
 v v v v v  v  v  v  v v v                            v

,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x| |  |  |  |B |x|x|x|x|x|................|.|.|.|.| <- primary pte
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
| | | | |  |  |  |  | | | | |..................|S|G|I|X| <- secondary pte
'_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_'

The above PTE changes is applicable to hugetlbpages aswell.

The patch does the following code changes:

a) moves  the  H_PAGE_F_SECOND and  H_PAGE_F_GIX to 4k PTE
	header   since it is no more needed b the 64k PTEs.
b) abstracts  out __real_pte() and __rpte_to_hidx() so the
	caller  need not know the bit location of the slot.
c) moves the slot bits the secondary pte.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
---
 arch/powerpc/include/asm/book3s/64/hash-4k.h  |    3 ++
 arch/powerpc/include/asm/book3s/64/hash-64k.h |   29 ++++++++++-------------
 arch/powerpc/include/asm/book3s/64/hash.h     |    3 --
 arch/powerpc/mm/hash64_64k.c                  |   30 ++++++++++++++++++------
 arch/powerpc/mm/hugetlbpage-hash64.c          |   22 ++++++++++++++----
 5 files changed, 55 insertions(+), 32 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/hash-4k.h b/arch/powerpc/include/asm/book3s/64/hash-4k.h
index a306c0a..1e60099 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-4k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h
@@ -16,6 +16,9 @@
 #define H_PUD_TABLE_SIZE	(sizeof(pud_t) << H_PUD_INDEX_SIZE)
 #define H_PGD_TABLE_SIZE	(sizeof(pgd_t) << H_PGD_INDEX_SIZE)
 
+#define H_PAGE_F_GIX_SHIFT	56
+#define H_PAGE_F_SECOND	_RPAGE_RSV2	/* HPTE is in 2ndary HPTEG */
+#define H_PAGE_F_GIX	(_RPAGE_RSV3 | _RPAGE_RSV4 | _RPAGE_RPN44)
 #define H_PAGE_BUSY	_RPAGE_RSV1     /* software: PTE & hash are busy */
 
 /* PTE flags to conserve for HPTE identification */
diff --git a/arch/powerpc/include/asm/book3s/64/hash-64k.h b/arch/powerpc/include/asm/book3s/64/hash-64k.h
index 62e580c..c281f18 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-64k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h
@@ -12,7 +12,7 @@
  */
 #define H_PAGE_COMBO	_RPAGE_RPN0 /* this is a combo 4k page */
 #define H_PAGE_4K_PFN	_RPAGE_RPN1 /* PFN is for a single 4k page */
-#define H_PAGE_BUSY	_RPAGE_RPN42     /* software: PTE & hash are busy */
+#define H_PAGE_BUSY	_RPAGE_RPN44     /* software: PTE & hash are busy */
 
 /*
  * We need to differentiate between explicit huge page and THP huge
@@ -21,8 +21,7 @@
 #define H_PAGE_THP_HUGE  H_PAGE_4K_PFN
 
 /* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_F_SECOND | \
-			 H_PAGE_F_GIX | H_PAGE_HASHPTE | H_PAGE_COMBO)
+#define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_HASHPTE | H_PAGE_COMBO)
 /*
  * we support 16 fragments per PTE page of 64K size.
  */
@@ -50,24 +49,22 @@ static inline real_pte_t __real_pte(pte_t pte, pte_t *ptep)
 	unsigned long *hidxp;
 
 	rpte.pte = pte;
-	rpte.hidx = 0;
-	if (pte_val(pte) & H_PAGE_COMBO) {
-		/*
-		 * Make sure we order the hidx load against the H_PAGE_COMBO
-		 * check. The store side ordering is done in __hash_page_4K
-		 */
-		smp_rmb();
-		hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
-		rpte.hidx = *hidxp;
-	}
+	/*
+	 * Ensure that we do not read the hidx before we read
+	 * the pte. Because the writer side is  expected
+	 * to finish writing the hidx first followed by the pte,
+	 * by using smp_wmb().
+	 * pte_set_hash_slot() ensures that.
+	 */
+	smp_rmb();
+	hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
+	rpte.hidx = *hidxp;
 	return rpte;
 }
 
 static inline unsigned long __rpte_to_hidx(real_pte_t rpte, unsigned long index)
 {
-	if ((pte_val(rpte.pte) & H_PAGE_COMBO))
-		return (rpte.hidx >> (index<<2)) & 0xf;
-	return (pte_val(rpte.pte) >> H_PAGE_F_GIX_SHIFT) & 0xf;
+	return ((rpte.hidx >> (index<<2)) & 0xfUL);
 }
 
 #define __rpte_to_pte(r)	((r).pte)
diff --git a/arch/powerpc/include/asm/book3s/64/hash.h b/arch/powerpc/include/asm/book3s/64/hash.h
index 2d72964..d27f885 100644
--- a/arch/powerpc/include/asm/book3s/64/hash.h
+++ b/arch/powerpc/include/asm/book3s/64/hash.h
@@ -8,9 +8,6 @@
  *
  */
 #define H_PTE_NONE_MASK		_PAGE_HPTEFLAGS
-#define H_PAGE_F_GIX_SHIFT	56
-#define H_PAGE_F_SECOND		_RPAGE_RSV2	/* HPTE is in 2ndary HPTEG */
-#define H_PAGE_F_GIX		(_RPAGE_RSV3 | _RPAGE_RSV4 | _RPAGE_RPN44)
 #define H_PAGE_HASHPTE		_RPAGE_RPN43	/* PTE has associated HPTE */
 
 #ifdef CONFIG_PPC_64K_PAGES
diff --git a/arch/powerpc/mm/hash64_64k.c b/arch/powerpc/mm/hash64_64k.c
index e573bd3..0012618 100644
--- a/arch/powerpc/mm/hash64_64k.c
+++ b/arch/powerpc/mm/hash64_64k.c
@@ -243,6 +243,8 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 		    unsigned long vsid, pte_t *ptep, unsigned long trap,
 		    unsigned long flags, int ssize)
 {
+	real_pte_t rpte;
+	unsigned long *hidxp;
 	unsigned long hpte_group;
 	unsigned long rflags, pa;
 	unsigned long old_pte, new_pte;
@@ -279,6 +281,7 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 	} while (!pte_xchg(ptep, __pte(old_pte), __pte(new_pte)));
 
 	rflags = htab_convert_pte_flags(new_pte);
+	rpte = __real_pte(__pte(old_pte), ptep);
 
 	if (cpu_has_feature(CPU_FTR_NOEXECUTE) &&
 	    !cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
@@ -286,15 +289,17 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 
 	vpn  = hpt_vpn(ea, vsid, ssize);
 	if (unlikely(old_pte & H_PAGE_HASHPTE)) {
-		/*
-		 * There MIGHT be an HPTE for this pte
-		 */
+		unsigned long hash, slot, hidx;
+
 		hash = hpt_hash(vpn, shift, ssize);
-		if (old_pte & H_PAGE_F_SECOND)
+		hidx = __rpte_to_hidx(rpte, 0);
+		if (hidx & _PTEIDX_SECONDARY)
 			hash = ~hash;
 		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-		slot += (old_pte & H_PAGE_F_GIX) >> H_PAGE_F_GIX_SHIFT;
-
+		slot += hidx & _PTEIDX_GROUP_IX;
+		/*
+		 * There MIGHT be an HPTE for this pte
+		 */
 		if (mmu_hash_ops.hpte_updatepp(slot, rflags, vpn, MMU_PAGE_64K,
 					       MMU_PAGE_64K, ssize,
 					       flags) == -1)
@@ -344,9 +349,18 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 					   MMU_PAGE_64K, MMU_PAGE_64K, old_pte);
 			return -1;
 		}
+
+		/*
+		 * Insert slot number & secondary bit in PTE second half.
+		 */
+		hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
+		rpte.hidx &= ~(0xfUL);
+		*hidxp = rpte.hidx  | (slot & 0xfUL);
+		/*
+		 * check __real_pte for details on matching smp_rmb()
+		 */
+		smp_wmb();
 		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | H_PAGE_HASHPTE;
-		new_pte |= (slot << H_PAGE_F_GIX_SHIFT) &
-			(H_PAGE_F_SECOND | H_PAGE_F_GIX);
 	}
 	*ptep = __pte(new_pte & ~H_PAGE_BUSY);
 	return 0;
diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c
index a84bb44..6f7aee3 100644
--- a/arch/powerpc/mm/hugetlbpage-hash64.c
+++ b/arch/powerpc/mm/hugetlbpage-hash64.c
@@ -22,6 +22,8 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 		     pte_t *ptep, unsigned long trap, unsigned long flags,
 		     int ssize, unsigned int shift, unsigned int mmu_psize)
 {
+	real_pte_t rpte;
+	unsigned long *hidxp;
 	unsigned long vpn;
 	unsigned long old_pte, new_pte;
 	unsigned long rflags, pa, sz;
@@ -61,6 +63,7 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 	} while(!pte_xchg(ptep, __pte(old_pte), __pte(new_pte)));
 
 	rflags = htab_convert_pte_flags(new_pte);
+	rpte = __real_pte(__pte(old_pte), ptep);
 
 	sz = ((1UL) << shift);
 	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
@@ -71,13 +74,14 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 	/* Check if pte already has an hpte (case 2) */
 	if (unlikely(old_pte & H_PAGE_HASHPTE)) {
 		/* There MIGHT be an HPTE for this pte */
-		unsigned long hash, slot;
+		unsigned long hash, slot, hidx;
 
 		hash = hpt_hash(vpn, shift, ssize);
-		if (old_pte & H_PAGE_F_SECOND)
+		hidx = __rpte_to_hidx(rpte, 0);
+		if (hidx & _PTEIDX_SECONDARY)
 			hash = ~hash;
 		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-		slot += (old_pte & H_PAGE_F_GIX) >> H_PAGE_F_GIX_SHIFT;
+		slot += hidx & _PTEIDX_GROUP_IX;
 
 		if (mmu_hash_ops.hpte_updatepp(slot, rflags, vpn, mmu_psize,
 					       mmu_psize, ssize, flags) == -1)
@@ -106,8 +110,16 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 			return -1;
 		}
 
-		new_pte |= (slot << H_PAGE_F_GIX_SHIFT) &
-			(H_PAGE_F_SECOND | H_PAGE_F_GIX);
+		/*
+		 * Insert slot number & secondary bit in PTE second half.
+		 */
+		hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
+		rpte.hidx &= ~(0xfUL);
+		*hidxp = rpte.hidx  | (slot & 0xfUL);
+		/*
+		 * check __real_pte for details on matching smp_rmb()
+		 */
+		smp_wmb();
 	}
 
 	/*
-- 
1.7.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2017-07-05 21:22 UTC|newest]

Thread overview: 92+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-05 21:21 [RFC v5 00/38] powerpc: Memory Protection Keys Ram Pai
2017-07-05 21:21 ` [RFC v5 01/38] powerpc: Free up four 64K PTE bits in 4K backed HPTE pages Ram Pai
2017-07-07  7:25   ` Balbir Singh
2017-07-05 21:21 ` Ram Pai [this message]
2017-07-11  5:59   ` [RFC v5 02/38] powerpc: Free up four 64K PTE bits in 64K " Balbir Singh
2017-07-11 15:44     ` Ram Pai
2017-07-12  3:10       ` Balbir Singh
2017-07-13  7:39         ` Ram Pai
2017-07-05 21:21 ` [RFC v5 03/38] powerpc: introduce pte_set_hash_slot() helper Ram Pai
2017-07-05 21:21 ` [RFC v5 04/38] powerpc: introduce pte_get_hash_gslot() helper Ram Pai
2017-07-05 21:21 ` [RFC v5 05/38] powerpc: capture the PTE format changes in the dump pte report Ram Pai
2017-07-05 21:21 ` [RFC v5 06/38] powerpc: use helper functions in __hash_page_64K() for 64K PTE Ram Pai
2017-07-05 21:21 ` [RFC v5 07/38] powerpc: use helper functions in __hash_page_huge() " Ram Pai
2017-07-05 21:21 ` [RFC v5 08/38] powerpc: use helper functions in __hash_page_4K() " Ram Pai
2017-07-05 21:21 ` [RFC v5 09/38] powerpc: use helper functions in __hash_page_4K() for 4K PTE Ram Pai
2017-07-05 21:21 ` [RFC v5 10/38] powerpc: use helper functions in flush_hash_page() Ram Pai
2017-07-05 21:21 ` [RFC v5 11/38] mm: introduce an additional vma bit for powerpc pkey Ram Pai
2017-07-11 18:10   ` Dave Hansen
2017-07-12 22:23     ` Ram Pai
2017-07-12 22:40       ` Benjamin Herrenschmidt
2017-07-05 21:21 ` [RFC v5 12/38] mm: ability to disable execute permission on a key at creation Ram Pai
2017-07-11 18:11   ` Dave Hansen
2017-07-11 21:29     ` Benjamin Herrenschmidt
2017-07-11 21:51       ` Ram Pai
2017-07-11 21:57         ` Dave Hansen
2017-07-11 22:14           ` Ram Pai
2017-07-11 22:19             ` Dave Hansen
2017-07-11 22:08         ` Benjamin Herrenschmidt
2017-07-11 22:19           ` Ram Pai
2017-07-05 21:21 ` [RFC v5 13/38] x86: disallow pkey creation with PKEY_DISABLE_EXECUTE Ram Pai
2017-07-11 18:12   ` Dave Hansen
2017-07-05 21:21 ` [RFC v5 14/38] powerpc: initial plumbing for key management Ram Pai
2017-07-12  3:28   ` Balbir Singh
2017-07-13  7:45     ` Ram Pai
2017-07-13 20:37       ` Ram Pai
2017-07-13 21:30         ` Balbir Singh
2017-07-05 21:21 ` [RFC v5 15/38] powerpc: helper function to read,write AMR,IAMR,UAMOR registers Ram Pai
2017-07-12  5:26   ` Balbir Singh
2017-07-13  7:55     ` Ram Pai
2017-07-13  9:49       ` Balbir Singh
2017-07-13 23:29         ` Ram Pai
2017-07-05 21:21 ` [RFC v5 16/38] powerpc: implementation for arch_set_user_pkey_access() Ram Pai
2017-07-05 21:21 ` [RFC v5 17/38] powerpc: sys_pkey_alloc() and sys_pkey_free() system calls Ram Pai
2017-07-05 21:21 ` [RFC v5 18/38] powerpc: store and restore the pkey state across context switches Ram Pai
2017-07-05 21:21 ` [RFC v5 19/38] powerpc: introduce execute-only pkey Ram Pai
2017-07-05 21:21 ` [RFC v5 20/38] powerpc: ability to associate pkey to a vma Ram Pai
2017-07-05 21:21 ` [RFC v5 21/38] powerpc: implementation for arch_override_mprotect_pkey() Ram Pai
2017-07-05 21:21 ` [RFC v5 22/38] powerpc: map vma key-protection bits to pte key bits Ram Pai
2017-07-05 21:22 ` [RFC v5 23/38] powerpc: sys_pkey_mprotect() system call Ram Pai
2017-07-05 21:22 ` [RFC v5 24/38] powerpc: Program HPTE key protection bits Ram Pai
2017-07-05 21:22 ` [RFC v5 25/38] powerpc: helper to validate key-access permissions of a pte Ram Pai
2017-07-05 21:22 ` [RFC v5 26/38] powerpc: check key protection for user page access Ram Pai
2017-07-05 21:22 ` [RFC v5 27/38] powerpc: Macro the mask used for checking DSI exception Ram Pai
2017-07-05 21:22 ` [RFC v5 28/38] powerpc: implementation for arch_vma_access_permitted() Ram Pai
2017-07-05 21:22 ` [RFC v5 29/38] powerpc: Handle exceptions caused by pkey violation Ram Pai
2017-07-05 21:22 ` [RFC v5 30/38] powerpc: capture AMR register content on " Ram Pai
2017-07-05 21:22 ` [RFC v5 31/38] powerpc: introduce get_pte_pkey() helper Ram Pai
2017-07-10  3:11   ` Anshuman Khandual
2017-07-10  5:55     ` Ram Pai
2017-07-11 11:22       ` Anshuman Khandual
2017-07-05 21:22 ` [RFC v5 32/38] powerpc: capture the violated protection key on fault Ram Pai
2017-07-10  3:10   ` Anshuman Khandual
2017-07-10  5:49     ` Ram Pai
2017-07-05 21:22 ` [RFC v5 33/38] powerpc: Deliver SEGV signal on pkey violation Ram Pai
2017-07-10  3:08   ` Anshuman Khandual
2017-07-05 21:22 ` [RFC v5 34/38] procfs: display the protection-key number associated with a vma Ram Pai
2017-07-10  3:07   ` Anshuman Khandual
2017-07-10  6:01     ` Ram Pai
2017-07-11 18:13   ` Dave Hansen
2017-07-13  8:03     ` Ram Pai
2017-07-13 14:07       ` Dave Hansen
2017-07-13 17:04         ` Ram Pai
2017-07-05 21:22 ` [RFC v5 35/38] selftest: Move protecton key selftest to arch neutral directory Ram Pai
2017-07-05 21:22 ` [RFC v5 36/38] selftest: PowerPC specific test updates to memory protection keys Ram Pai
2017-07-11 17:33   ` Dave Hansen
2017-07-12 21:57     ` Ram Pai
2017-07-05 21:22 ` [RFC v5 37/38] Documentation: Move protecton key documentation to arch neutral directory Ram Pai
2017-07-05 21:22 ` [RFC v5 38/38] Documentation: PowerPC specific updates to memory protection keys Ram Pai
2017-07-10  3:07   ` Anshuman Khandual
2017-07-10  5:59     ` Ram Pai
2017-07-11 18:23   ` Dave Hansen
2017-07-13 19:56     ` Ram Pai
2017-07-10  5:43 ` [RFC v5 00/38] powerpc: Memory Protection Keys Anshuman Khandual
2017-07-10  6:05   ` Ram Pai
2017-07-10 17:15     ` Ram Pai
2017-07-11 14:52 ` Michal Hocko
2017-07-11 19:32   ` Ram Pai
2017-07-11 21:30     ` Benjamin Herrenschmidt
2017-07-12  7:23     ` Michal Hocko
2017-07-12  7:39       ` Michal Hocko
2017-07-12 22:53       ` Benjamin Herrenschmidt
2017-07-13  6:20         ` Michal Hocko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1499289735-14220-3-git-send-email-linuxram@us.ibm.com \
    --to=linuxram@us.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=arnd@arndb.de \
    --cc=benh@kernel.crashing.org \
    --cc=bsingharora@gmail.com \
    --cc=corbet@lwn.net \
    --cc=dave.hansen@intel.com \
    --cc=hbabu@us.ibm.com \
    --cc=khandual@linux.vnet.ibm.com \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mingo@redhat.com \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).