[PATCH v32 0/4] Virtio-balloon: support free page reporting

[PATCH v32 0/4] Virtio-balloon: support free page reporting

[Wei Wang]

This patch series is separated from the previous "Virtio-balloon
Enhancement" series. The new feature, VIRTIO_BALLOON_F_FREE_PAGE_HINT,  
implemented by this series enables the virtio-balloon driver to report
hints of guest free pages to the host. It can be used to accelerate live
migration of VMs. Here is an introduction of this usage:

Live migration needs to transfer the VM's memory from the source machine
to the destination round by round. For the 1st round, all the VM's memory
is transferred. From the 2nd round, only the pieces of memory that were
written by the guest (after the 1st round) are transferred. One method
that is popularly used by the hypervisor to track which part of memory is
written is to write-protect all the guest memory.

This feature enables the optimization by skipping the transfer of guest
free pages during VM live migration. It is not concerned that the memory
pages are used after they are given to the hypervisor as a hint of the
free pages, because they will be tracked by the hypervisor and transferred
in the subsequent round if they are used and written.

* Tests
- Test Environment
    Host: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
    Guest: 8G RAM, 4 vCPU
    Migration setup: migrate_set_speed 100G, migrate_set_downtime 2 second

- Test Results
    - Idle Guest Live Migration Time (results are averaged over 10 runs):
        - Optimization v.s. Legacy = 271ms vs 1769ms --> ~86% reduction
    - Guest with Linux Compilation Workload (make bzImage -j4):
        - Live Migration Time (average)
          Optimization v.s. Legacy = 1265ms v.s. 2634ms --> ~51% reduction
        - Linux Compilation Time
          Optimization v.s. Legacy = 4min56s v.s. 5min3s
          --> no obvious difference

ChangeLog:
v31->v32:
    - virtio-balloon:
        - rename cmd_id_use to cmd_id_active;
        - report_free_page_func: detach used buffers after host sends a vq
          interrupt, instead of busy waiting for used buffers.
v30->v31:
    - virtio-balloon:
        - virtio_balloon_send_free_pages: return -EINTR rather than 1 to
          indicate an active stop requested by host; and add more
          comments to explain about access to cmd_id_received without
          locks;
        -  add_one_sg: add TODO to comments about possible improvement.
v29->v30:
    - mm/walk_free_mem_block: add cond_sched() for each order
v28->v29:
    - mm/page_poison: only expose page_poison_enabled(), rather than more
      changes did in v28, as we are not 100% confident about that for now.
    - virtio-balloon: use a separate buffer for the stop cmd, instead of
      having the start and stop cmd use the same buffer. This avoids the
      corner case that the start cmd is overridden by the stop cmd when
      the host has a delay in reading the start cmd.
v27->v28:
    - mm/page_poison: Move PAGE_POISON to page_poison.c and add a function
      to expose page poison val to kernel modules.
v26->v27:
    - add a new patch to expose page_poisoning_enabled to kernel modules
    - virtio-balloon: set poison_val to 0xaaaaaaaa, instead of 0xaa
v25->v26: virtio-balloon changes only
    - remove kicking free page vq since the host now polls the vq after
      initiating the reporting
    - report_free_page_func: detach all the used buffers after sending
      the stop cmd id. This avoids leaving the detaching burden (i.e.
      overhead) to the next cmd id. Detaching here isn't considered
      overhead since the stop cmd id has been sent, and host has already
      moved formard.
v24->v25:
    - mm: change walk_free_mem_block to return 0 (instead of true) on
          completing the report, and return a non-zero value from the
          callabck, which stops the reporting.
    - virtio-balloon:
        - use enum instead of define for VIRTIO_BALLOON_VQ_INFLATE etc.
        - avoid __virtio_clear_bit when bailing out;
        - a new method to avoid reporting the some cmd id to host twice
        - destroy_workqueue can cancel free page work when the feature is
          negotiated;
        - fail probe when the free page vq size is less than 2.
v23->v24:
    - change feature name VIRTIO_BALLOON_F_FREE_PAGE_VQ to
      VIRTIO_BALLOON_F_FREE_PAGE_HINT
    - kick when vq->num_free < half full, instead of "= half full"
    - replace BUG_ON with bailing out
    - check vb->balloon_wq in probe(), if null, bail out
    - add a new feature bit for page poisoning
    - solve the corner case that one cmd id being sent to host twice
v22->v23:
    - change to kick the device when the vq is half-way full;
    - open-code batch_free_page_sg into add_one_sg;
    - change cmd_id from "uint32_t" to "__virtio32";
    - reserver one entry in the vq for the driver to send cmd_id, instead
      of busywaiting for an available entry;
    - add "stop_update" check before queue_work for prudence purpose for
      now, will have a separate patch to discuss this flag check later;
    - init_vqs: change to put some variables on stack to have simpler
      implementation;
    - add destroy_workqueue(vb->balloon_wq);
v21->v22:
    - add_one_sg: some code and comment re-arrangement
    - send_cmd_id: handle a cornercase

For previous ChangeLog, please reference
https://lwn.net/Articles/743660/

Wei Wang (4):
  mm: support reporting free page blocks
  virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT
  mm/page_poison: expose page_poisoning_enabled to kernel modules
  virtio-balloon: VIRTIO_BALLOON_F_PAGE_POISON

 drivers/virtio/virtio_balloon.c     | 298 +++++++++++++++++++++++++++++++-----
 include/linux/mm.h                  |   6 +
 include/uapi/linux/virtio_balloon.h |   7 +
 mm/page_alloc.c                     |  97 ++++++++++++
 mm/page_poison.c                    |   6 +
 5 files changed, 378 insertions(+), 36 deletions(-)

-- 
2.7.4

[PATCH v32 1/4] mm: support reporting free page blocks

[Wei Wang]

This patch adds support to walk through the free page blocks in the
system and report them via a callback function. Some page blocks may
leave the free list after zone->lock is released, so it is the caller's
responsibility to either detect or prevent the use of such pages.

One use example of this patch is to accelerate live migration by skipping
the transfer of free pages reported from the guest. A popular method used
by the hypervisor to track which part of memory is written during live
migration is to write-protect all the guest memory. So, those pages that
are reported as free pages but are written after the report function
returns will be captured by the hypervisor, and they will be added to the
next round of memory transfer.

Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
---
 include/linux/mm.h |  6 ++++
 mm/page_alloc.c    | 97 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 103 insertions(+)

diff --git a/include/linux/mm.h b/include/linux/mm.h
index f945dff..4698df1 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1951,6 +1951,12 @@ extern void free_area_init_node(int nid, unsigned long * zones_size,
 		unsigned long zone_start_pfn, unsigned long *zholes_size);
 extern void free_initmem(void);
 
+extern int walk_free_mem_block(void *opaque,
+			       int min_order,
+			       int (*report_pfn_range)(void *opaque,
+						       unsigned long pfn,
+						       unsigned long num));
+
 /*
  * Free reserved pages within range [PAGE_ALIGN(start), end & PAGE_MASK)
  * into the buddy system. The freed pages will be poisoned with pattern
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 4ea0182..83e50fd 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4912,6 +4912,103 @@ void show_free_areas(unsigned int filter, nodemask_t *nodemask)
 	show_swap_cache_info();
 }
 
+/*
+ * Walk through a free page list and report the found pfn range via the
+ * callback.
+ *
+ * Return 0 if it completes the reporting. Otherwise, return the non-zero
+ * value returned from the callback.
+ */
+static int walk_free_page_list(void *opaque,
+			       struct zone *zone,
+			       int order,
+			       enum migratetype mt,
+			       int (*report_pfn_range)(void *,
+						       unsigned long,
+						       unsigned long))
+{
+	struct page *page;
+	struct list_head *list;
+	unsigned long pfn, flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&zone->lock, flags);
+	list = &zone->free_area[order].free_list[mt];
+	list_for_each_entry(page, list, lru) {
+		pfn = page_to_pfn(page);
+		ret = report_pfn_range(opaque, pfn, 1 << order);
+		if (ret)
+			break;
+	}
+	spin_unlock_irqrestore(&zone->lock, flags);
+
+	return ret;
+}
+
+/**
+ * walk_free_mem_block - Walk through the free page blocks in the system
+ * @opaque: the context passed from the caller
+ * @min_order: the minimum order of free lists to check
+ * @report_pfn_range: the callback to report the pfn range of the free pages
+ *
+ * If the callback returns a non-zero value, stop iterating the list of free
+ * page blocks. Otherwise, continue to report.
+ *
+ * Please note that there are no locking guarantees for the callback and
+ * that the reported pfn range might be freed or disappear after the
+ * callback returns so the caller has to be very careful how it is used.
+ *
+ * The callback itself must not sleep or perform any operations which would
+ * require any memory allocations directly (not even GFP_NOWAIT/GFP_ATOMIC)
+ * or via any lock dependency. It is generally advisable to implement
+ * the callback as simple as possible and defer any heavy lifting to a
+ * different context.
+ *
+ * There is no guarantee that each free range will be reported only once
+ * during one walk_free_mem_block invocation.
+ *
+ * pfn_to_page on the given range is strongly discouraged and if there is
+ * an absolute need for that make sure to contact MM people to discuss
+ * potential problems.
+ *
+ * The function itself might sleep so it cannot be called from atomic
+ * contexts.
+ *
+ * In general low orders tend to be very volatile and so it makes more
+ * sense to query larger ones first for various optimizations which like
+ * ballooning etc... This will reduce the overhead as well.
+ *
+ * Return 0 if it completes the reporting. Otherwise, return the non-zero
+ * value returned from the callback.
+ */
+int walk_free_mem_block(void *opaque,
+			int min_order,
+			int (*report_pfn_range)(void *opaque,
+			unsigned long pfn,
+			unsigned long num))
+{
+	struct zone *zone;
+	int order;
+	enum migratetype mt;
+	int ret;
+
+	for_each_populated_zone(zone) {
+		for (order = MAX_ORDER - 1; order >= min_order; order--) {
+			for (mt = 0; mt < MIGRATE_TYPES; mt++) {
+				ret = walk_free_page_list(opaque, zone,
+							  order, mt,
+							  report_pfn_range);
+				if (ret)
+					return ret;
+			}
+			cond_resched();
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(walk_free_mem_block);
+
 static void zoneref_set_zone(struct zone *zone, struct zoneref *zoneref)
 {
 	zoneref->zone = zone;
-- 
2.7.4

[PATCH v32 2/4] virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT

[Wei Wang]

Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the
support of reporting hints of guest free pages to host via virtio-balloon.

Host requests the guest to report free page hints by sending a new cmd
id to the guest via the free_page_report_cmd_id configuration register.

When the guest starts to report, the first element added to the free page
vq is the cmd id given by host. When the guest finishes the reporting
of all the free pages, VIRTIO_BALLOON_FREE_PAGE_REPORT_STOP_ID is added
to the vq to tell host that the reporting is done. Host polls the free
page vq after sending the starting cmd id, so the guest doesn't need to
kick after filling an element to the vq.

Host may also requests the guest to stop the reporting in advance by
sending the stop cmd id to the guest via the configuration register.

Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
---
 drivers/virtio/virtio_balloon.c     | 288 +++++++++++++++++++++++++++++++-----
 include/uapi/linux/virtio_balloon.h |   4 +
 2 files changed, 256 insertions(+), 36 deletions(-)

diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index dfe5684..197f865 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -51,9 +51,22 @@ MODULE_PARM_DESC(oom_pages, "pages to free on OOM");
 static struct vfsmount *balloon_mnt;
 #endif
 
+enum virtio_balloon_vq {
+	VIRTIO_BALLOON_VQ_INFLATE,
+	VIRTIO_BALLOON_VQ_DEFLATE,
+	VIRTIO_BALLOON_VQ_STATS,
+	VIRTIO_BALLOON_VQ_FREE_PAGE,
+	VIRTIO_BALLOON_VQ_MAX
+};
+
 struct virtio_balloon {
 	struct virtio_device *vdev;
-	struct virtqueue *inflate_vq, *deflate_vq, *stats_vq;
+	struct virtqueue *inflate_vq, *deflate_vq, *stats_vq, *free_page_vq;
+
+	/* Balloon's own wq for cpu-intensive work items */
+	struct workqueue_struct *balloon_wq;
+	/* The free page reporting work item submitted to the balloon wq */
+	struct work_struct report_free_page_work;
 
 	/* The balloon servicing is delegated to a freezable workqueue. */
 	struct work_struct update_balloon_stats_work;
@@ -63,6 +76,13 @@ struct virtio_balloon {
 	spinlock_t stop_update_lock;
 	bool stop_update;
 
+	/* The new cmd id received from host */
+	uint32_t cmd_id_received;
+	/* The cmd id that is actively in use */
+	__virtio32 cmd_id_active;
+	/* Buffer to store the stop sign */
+	__virtio32 stop_cmd_id;
+
 	/* Waiting for host to ack the pages we released. */
 	wait_queue_head_t acked;
 
@@ -320,17 +340,6 @@ static void stats_handle_request(struct virtio_balloon *vb)
 	virtqueue_kick(vq);
 }
 
-static void virtballoon_changed(struct virtio_device *vdev)
-{
-	struct virtio_balloon *vb = vdev->priv;
-	unsigned long flags;
-
-	spin_lock_irqsave(&vb->stop_update_lock, flags);
-	if (!vb->stop_update)
-		queue_work(system_freezable_wq, &vb->update_balloon_size_work);
-	spin_unlock_irqrestore(&vb->stop_update_lock, flags);
-}
-
 static inline s64 towards_target(struct virtio_balloon *vb)
 {
 	s64 target;
@@ -347,6 +356,34 @@ static inline s64 towards_target(struct virtio_balloon *vb)
 	return target - vb->num_pages;
 }
 
+static void virtballoon_changed(struct virtio_device *vdev)
+{
+	struct virtio_balloon *vb = vdev->priv;
+	unsigned long flags;
+	s64 diff = towards_target(vb);
+
+	if (diff) {
+		spin_lock_irqsave(&vb->stop_update_lock, flags);
+		if (!vb->stop_update)
+			queue_work(system_freezable_wq,
+				   &vb->update_balloon_size_work);
+		spin_unlock_irqrestore(&vb->stop_update_lock, flags);
+	}
+
+	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT)) {
+		virtio_cread(vdev, struct virtio_balloon_config,
+			     free_page_report_cmd_id, &vb->cmd_id_received);
+		if (vb->cmd_id_received !=
+		    VIRTIO_BALLOON_FREE_PAGE_REPORT_STOP_ID) {
+			spin_lock_irqsave(&vb->stop_update_lock, flags);
+			if (!vb->stop_update)
+				queue_work(vb->balloon_wq,
+					   &vb->report_free_page_work);
+			spin_unlock_irqrestore(&vb->stop_update_lock, flags);
+		}
+	}
+}
+
 static void update_balloon_size(struct virtio_balloon *vb)
 {
 	u32 actual = vb->num_pages;
@@ -419,44 +456,196 @@ static void update_balloon_size_func(struct work_struct *work)
 		queue_work(system_freezable_wq, work);
 }
 
+static void free_page_vq_cb(struct virtqueue *vq)
+{
+	unsigned int unused;
+
+	while (virtqueue_get_buf(vq, &unused))
+		;
+}
+
 static int init_vqs(struct virtio_balloon *vb)
 {
-	struct virtqueue *vqs[3];
-	vq_callback_t *callbacks[] = { balloon_ack, balloon_ack, stats_request };
-	static const char * const names[] = { "inflate", "deflate", "stats" };
-	int err, nvqs;
+	struct virtqueue *vqs[VIRTIO_BALLOON_VQ_MAX];
+	vq_callback_t *callbacks[VIRTIO_BALLOON_VQ_MAX];
+	const char *names[VIRTIO_BALLOON_VQ_MAX];
+	struct scatterlist sg;
+	int ret;
 
 	/*
-	 * We expect two virtqueues: inflate and deflate, and
-	 * optionally stat.
+	 * Inflateq and deflateq are used unconditionally. The names[]
+	 * will be NULL if the related feature is not enabled, which will
+	 * cause no allocation for the corresponding virtqueue in find_vqs.
 	 */
-	nvqs = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ) ? 3 : 2;
-	err = virtio_find_vqs(vb->vdev, nvqs, vqs, callbacks, names, NULL);
-	if (err)
-		return err;
+	callbacks[VIRTIO_BALLOON_VQ_INFLATE] = balloon_ack;
+	names[VIRTIO_BALLOON_VQ_INFLATE] = "inflate";
+	callbacks[VIRTIO_BALLOON_VQ_DEFLATE] = balloon_ack;
+	names[VIRTIO_BALLOON_VQ_DEFLATE] = "deflate";
+	names[VIRTIO_BALLOON_VQ_STATS] = NULL;
+	names[VIRTIO_BALLOON_VQ_FREE_PAGE] = NULL;
 
-	vb->inflate_vq = vqs[0];
-	vb->deflate_vq = vqs[1];
 	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) {
-		struct scatterlist sg;
-		unsigned int num_stats;
-		vb->stats_vq = vqs[2];
+		names[VIRTIO_BALLOON_VQ_STATS] = "stats";
+		callbacks[VIRTIO_BALLOON_VQ_STATS] = stats_request;
+	}
+
+	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT)) {
+		names[VIRTIO_BALLOON_VQ_FREE_PAGE] = "free_page_vq";
+		callbacks[VIRTIO_BALLOON_VQ_FREE_PAGE] = free_page_vq_cb;
+	}
+
+	ret = vb->vdev->config->find_vqs(vb->vdev, VIRTIO_BALLOON_VQ_MAX,
+					 vqs, callbacks, names, NULL, NULL);
+	if (ret)
+		return ret;
 
+	vb->inflate_vq = vqs[VIRTIO_BALLOON_VQ_INFLATE];
+	vb->deflate_vq = vqs[VIRTIO_BALLOON_VQ_DEFLATE];
+	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) {
+		vb->stats_vq = vqs[VIRTIO_BALLOON_VQ_STATS];
 		/*
 		 * Prime this virtqueue with one buffer so the hypervisor can
 		 * use it to signal us later (it can't be broken yet!).
 		 */
-		num_stats = update_balloon_stats(vb);
-
-		sg_init_one(&sg, vb->stats, sizeof(vb->stats[0]) * num_stats);
-		if (virtqueue_add_outbuf(vb->stats_vq, &sg, 1, vb, GFP_KERNEL)
-		    < 0)
-			BUG();
+		sg_init_one(&sg, vb->stats, sizeof(vb->stats));
+		ret = virtqueue_add_outbuf(vb->stats_vq, &sg, 1, vb,
+					   GFP_KERNEL);
+		if (ret) {
+			dev_warn(&vb->vdev->dev, "%s: add stat_vq failed\n",
+				 __func__);
+			return ret;
+		}
 		virtqueue_kick(vb->stats_vq);
 	}
+
+	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
+		vb->free_page_vq = vqs[VIRTIO_BALLOON_VQ_FREE_PAGE];
+
+	return 0;
+}
+
+static int add_one_sg(struct virtqueue *vq, unsigned long pfn, uint32_t len)
+{
+	struct scatterlist sg;
+	unsigned int unused;
+
+	sg_init_table(&sg, 1);
+	sg_set_page(&sg, pfn_to_page(pfn), len, 0);
+
+	/* Detach all the used buffers from the vq */
+	while (virtqueue_get_buf(vq, &unused))
+		;
+
+	/*
+	 * Since this is an optimization feature, losing a couple of free
+	 * pages to report isn't important. We simply return without adding
+	 * this page hint if the vq is full.
+	 * We are adding one entry each time, which essentially results in no
+	 * memory allocation, so the GFP_KERNEL flag below can be ignored.
+	 * Host works by polling the free page vq for hints after sending the
+	 * starting cmd id, so the driver doesn't need to kick after filling
+	 * the vq.
+	 * Lastly, there is always one entry reserved for the cmd id to use.
+	 *
+	 * TODO: The current implementation could be further improved by
+	 * stopping the reporting when the vq is full and continuing the
+	 * reporting when host notifies the driver that entries have been
+	 * used.
+	 */
+	if (vq->num_free > 1)
+		return virtqueue_add_inbuf(vq, &sg, 1, vq, GFP_KERNEL);
+
 	return 0;
 }
 
+static int virtio_balloon_send_free_pages(void *opaque, unsigned long pfn,
+					   unsigned long nr_pages)
+{
+	struct virtio_balloon *vb = (struct virtio_balloon *)opaque;
+	uint32_t len = nr_pages << PAGE_SHIFT;
+
+	/*
+	 * If a stop id or a new cmd id was just received from host, stop
+	 * the reporting, and return -EINTR to indicate an active stop.
+	 *
+	 * Ideally, we could have cmd_id_received accessed under locks, which
+	 * ensures that no more entries are added to the vq once a stop cmd
+	 * id is received from host. This requires host to wait for the
+	 * driver's ACK about finishing the update of cmd_id_received. But
+	 * this is not how host side works, because host doesn't work on an
+	 * assumption that the driver would always be responsive. So
+	 * theorically, there are possibilities that some entries may stay in
+	 * the vq when host has exited the optimization. This isn't an issue,
+	 * because entries simply contain guest physical addresses. There is no
+	 * allocated memory that needs to be freed or dma mapped pages that
+	 * need to be unmapped since virtio-balloon works with
+	 * VIRTIO_F_IOMMU_PLATFORM disabled.
+	 */
+	if (virtio32_to_cpu(vb->vdev, vb->cmd_id_active) !=
+			    vb->cmd_id_received)
+		return -EINTR;
+
+	return add_one_sg(vb->free_page_vq, pfn, len);
+}
+
+static int send_start_cmd_id(struct virtio_balloon *vb, uint32_t cmd_id)
+{
+	struct scatterlist sg;
+	struct virtqueue *vq = vb->free_page_vq;
+
+	vb->cmd_id_active = cpu_to_virtio32(vb->vdev, cmd_id);
+	sg_init_one(&sg, &vb->cmd_id_active, sizeof(vb->cmd_id_active));
+	return virtqueue_add_outbuf(vq, &sg, 1, vb, GFP_KERNEL);
+}
+
+static int send_stop_cmd_id(struct virtio_balloon *vb)
+{
+	struct scatterlist sg;
+	struct virtqueue *vq = vb->free_page_vq;
+
+	sg_init_one(&sg, &vb->stop_cmd_id, sizeof(vb->stop_cmd_id));
+	return virtqueue_add_outbuf(vq, &sg, 1, vb, GFP_KERNEL);
+}
+
+static void report_free_page_func(struct work_struct *work)
+{
+	struct virtio_balloon *vb;
+	struct virtqueue *vq;
+	int ret;
+
+	vb = container_of(work, struct virtio_balloon, report_free_page_work);
+	vq = vb->free_page_vq;
+
+	/* Start by sending the received cmd id to host with an outbuf. */
+	ret = send_start_cmd_id(vb, vb->cmd_id_received);
+	if (unlikely(ret))
+		goto err;
+
+	ret = walk_free_mem_block(vb, 0, &virtio_balloon_send_free_pages);
+	/*
+	 * -EINTR is the case that host actively stops the reporting, so we
+	 * don't treat it as an error that needs to bail out.
+	 */
+	if (unlikely(ret == -EIO))
+		goto err;
+
+	/* End by sending a stop id to host with an outbuf. */
+	ret = send_stop_cmd_id(vb);
+	if (unlikely(ret))
+		goto err;
+
+	/*
+	 * The used buffers are not detached here, because host consumes
+	 * entries asychronously and will send a vq interrupt after putting
+	 * back all the used buffers. So free_page_vq_cb will take care of
+	 * the used buffer detaching work.
+	 */
+	return;
+err:
+	dev_err(&vb->vdev->dev, "%s: free page vq failure, ret=%d\n",
+		__func__, ret);
+}
+
 #ifdef CONFIG_BALLOON_COMPACTION
 /*
  * virtballoon_migratepage - perform the balloon page migration on behalf of
@@ -570,18 +759,36 @@ static int virtballoon_probe(struct virtio_device *vdev)
 	if (err)
 		goto out_free_vb;
 
+	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT)) {
+		/*
+		 * There is always one entry reserved for cmd id, so the ring
+		 * size needs to be at least two to report free page hints.
+		 */
+		if (virtqueue_get_vring_size(vb->free_page_vq) < 2)
+			goto out_free_vb;
+		vb->balloon_wq = alloc_workqueue("balloon-wq",
+					WQ_FREEZABLE | WQ_CPU_INTENSIVE, 0);
+		if (!vb->balloon_wq) {
+			err = -ENOMEM;
+			goto out_del_vqs;
+		}
+		vb->stop_cmd_id = cpu_to_virtio32(vb->vdev,
+				VIRTIO_BALLOON_FREE_PAGE_REPORT_STOP_ID);
+		INIT_WORK(&vb->report_free_page_work, report_free_page_func);
+	}
+
 	vb->nb.notifier_call = virtballoon_oom_notify;
 	vb->nb.priority = VIRTBALLOON_OOM_NOTIFY_PRIORITY;
 	err = register_oom_notifier(&vb->nb);
 	if (err < 0)
-		goto out_del_vqs;
+		goto out_del_balloon_wq;
 
 #ifdef CONFIG_BALLOON_COMPACTION
 	balloon_mnt = kern_mount(&balloon_fs);
 	if (IS_ERR(balloon_mnt)) {
 		err = PTR_ERR(balloon_mnt);
 		unregister_oom_notifier(&vb->nb);
-		goto out_del_vqs;
+		goto out_del_balloon_wq;
 	}
 
 	vb->vb_dev_info.migratepage = virtballoon_migratepage;
@@ -591,7 +798,7 @@ static int virtballoon_probe(struct virtio_device *vdev)
 		kern_unmount(balloon_mnt);
 		unregister_oom_notifier(&vb->nb);
 		vb->vb_dev_info.inode = NULL;
-		goto out_del_vqs;
+		goto out_del_balloon_wq;
 	}
 	vb->vb_dev_info.inode->i_mapping->a_ops = &balloon_aops;
 #endif
@@ -602,6 +809,9 @@ static int virtballoon_probe(struct virtio_device *vdev)
 		virtballoon_changed(vdev);
 	return 0;
 
+out_del_balloon_wq:
+	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
+		destroy_workqueue(vb->balloon_wq);
 out_del_vqs:
 	vdev->config->del_vqs(vdev);
 out_free_vb:
@@ -635,6 +845,11 @@ static void virtballoon_remove(struct virtio_device *vdev)
 	cancel_work_sync(&vb->update_balloon_size_work);
 	cancel_work_sync(&vb->update_balloon_stats_work);
 
+	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT)) {
+		cancel_work_sync(&vb->report_free_page_work);
+		destroy_workqueue(vb->balloon_wq);
+	}
+
 	remove_common(vb);
 #ifdef CONFIG_BALLOON_COMPACTION
 	if (vb->vb_dev_info.inode)
@@ -686,6 +901,7 @@ static unsigned int features[] = {
 	VIRTIO_BALLOON_F_MUST_TELL_HOST,
 	VIRTIO_BALLOON_F_STATS_VQ,
 	VIRTIO_BALLOON_F_DEFLATE_ON_OOM,
+	VIRTIO_BALLOON_F_FREE_PAGE_HINT,
 };
 
 static struct virtio_driver virtio_balloon_driver = {
diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
index 4e8b830..b2d86c2 100644
--- a/include/uapi/linux/virtio_balloon.h
+++ b/include/uapi/linux/virtio_balloon.h
@@ -34,15 +34,19 @@
 #define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
 #define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
 #define VIRTIO_BALLOON_F_DEFLATE_ON_OOM	2 /* Deflate balloon on OOM */
+#define VIRTIO_BALLOON_F_FREE_PAGE_HINT	3 /* VQ to report free pages */
 
 /* Size of a PFN in the balloon interface. */
 #define VIRTIO_BALLOON_PFN_SHIFT 12
 
+#define VIRTIO_BALLOON_FREE_PAGE_REPORT_STOP_ID		0
 struct virtio_balloon_config {
 	/* Number of pages host wants Guest to give up. */
 	__u32 num_pages;
 	/* Number of pages we've actually got in balloon. */
 	__u32 actual;
+	/* Free page report command id, readonly by guest */
+	__u32 free_page_report_cmd_id;
 };
 
 #define VIRTIO_BALLOON_S_SWAP_IN  0   /* Amount of memory swapped in */
-- 
2.7.4

[PATCH v32 3/4] mm/page_poison: expose page_poisoning_enabled to kernel modules

[Wei Wang]

In some usages, e.g. virtio-balloon, a kernel module needs to know if
page poisoning is in use. This patch exposes the page_poisoning_enabled
function to kernel modules.

Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
---
 mm/page_poison.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/mm/page_poison.c b/mm/page_poison.c
index e83fd44..762b472 100644
--- a/mm/page_poison.c
+++ b/mm/page_poison.c
@@ -17,6 +17,11 @@ static int early_page_poison_param(char *buf)
 }
 early_param("page_poison", early_page_poison_param);
 
+/**
+ * page_poisoning_enabled - check if page poisoning is enabled
+ *
+ * Return true if page poisoning is enabled, or false if not.
+ */
 bool page_poisoning_enabled(void)
 {
 	/*
@@ -29,6 +34,7 @@ bool page_poisoning_enabled(void)
 		(!IS_ENABLED(CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC) &&
 		debug_pagealloc_enabled()));
 }
+EXPORT_SYMBOL_GPL(page_poisoning_enabled);
 
 static void poison_page(struct page *page)
 {
-- 
2.7.4

[PATCH v32 4/4] virtio-balloon: VIRTIO_BALLOON_F_PAGE_POISON

[Wei Wang]

The VIRTIO_BALLOON_F_PAGE_POISON feature bit is used to indicate if the
guest is using page poisoning. Guest writes to the poison_val config
field to tell host about the page poisoning value in use.

Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 drivers/virtio/virtio_balloon.c     | 10 ++++++++++
 include/uapi/linux/virtio_balloon.h |  3 +++
 2 files changed, 13 insertions(+)

diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 197f865..aea91ab 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -730,6 +730,7 @@ static struct file_system_type balloon_fs = {
 static int virtballoon_probe(struct virtio_device *vdev)
 {
 	struct virtio_balloon *vb;
+	__u32 poison_val;
 	int err;
 
 	if (!vdev->config->get) {
@@ -775,6 +776,11 @@ static int virtballoon_probe(struct virtio_device *vdev)
 		vb->stop_cmd_id = cpu_to_virtio32(vb->vdev,
 				VIRTIO_BALLOON_FREE_PAGE_REPORT_STOP_ID);
 		INIT_WORK(&vb->report_free_page_work, report_free_page_func);
+		if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_PAGE_POISON)) {
+			memset(&poison_val, PAGE_POISON, sizeof(poison_val));
+			virtio_cwrite(vb->vdev, struct virtio_balloon_config,
+				      poison_val, &poison_val);
+		}
 	}
 
 	vb->nb.notifier_call = virtballoon_oom_notify;
@@ -893,6 +899,9 @@ static int virtballoon_restore(struct virtio_device *vdev)
 
 static int virtballoon_validate(struct virtio_device *vdev)
 {
+	if (!page_poisoning_enabled())
+		__virtio_clear_bit(vdev, VIRTIO_BALLOON_F_PAGE_POISON);
+
 	__virtio_clear_bit(vdev, VIRTIO_F_IOMMU_PLATFORM);
 	return 0;
 }
@@ -902,6 +911,7 @@ static unsigned int features[] = {
 	VIRTIO_BALLOON_F_STATS_VQ,
 	VIRTIO_BALLOON_F_DEFLATE_ON_OOM,
 	VIRTIO_BALLOON_F_FREE_PAGE_HINT,
+	VIRTIO_BALLOON_F_PAGE_POISON,
 };
 
 static struct virtio_driver virtio_balloon_driver = {
diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
index b2d86c2..8b93581 100644
--- a/include/uapi/linux/virtio_balloon.h
+++ b/include/uapi/linux/virtio_balloon.h
@@ -35,6 +35,7 @@
 #define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
 #define VIRTIO_BALLOON_F_DEFLATE_ON_OOM	2 /* Deflate balloon on OOM */
 #define VIRTIO_BALLOON_F_FREE_PAGE_HINT	3 /* VQ to report free pages */
+#define VIRTIO_BALLOON_F_PAGE_POISON	4 /* Guest is using page poisoning */
 
 /* Size of a PFN in the balloon interface. */
 #define VIRTIO_BALLOON_PFN_SHIFT 12
@@ -47,6 +48,8 @@ struct virtio_balloon_config {
 	__u32 actual;
 	/* Free page report command id, readonly by guest */
 	__u32 free_page_report_cmd_id;
+	/* Stores PAGE_POISON if page poisoning is in use */
+	__u32 poison_val;
 };
 
 #define VIRTIO_BALLOON_S_SWAP_IN  0   /* Amount of memory swapped in */
-- 
2.7.4