From: Baoquan He <bhe@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org, akpm@linux-foundation.org,
richardw.yang@linux.intel.com, david@redhat.com,
osalvador@suse.de, dan.j.williams@intel.com, mhocko@suse.com,
bhe@redhat.com, rppt@linux.ibm.com, robin.murphy@arm.com
Subject: [PATCH v2 6/7] mm/sparse.c: move subsection_map related codes together
Date: Thu, 20 Feb 2020 12:33:15 +0800 [thread overview]
Message-ID: <20200220043316.19668-7-bhe@redhat.com> (raw)
In-Reply-To: <20200220043316.19668-1-bhe@redhat.com>
No functional change.
Signed-off-by: Baoquan He <bhe@redhat.com>
---
mm/sparse.c | 172 +++++++++++++++++++++++++---------------------------
1 file changed, 84 insertions(+), 88 deletions(-)
diff --git a/mm/sparse.c b/mm/sparse.c
index 14bff0b44e7c..053d6c2e5c1f 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -244,10 +244,94 @@ void __init subsection_map_init(unsigned long pfn, unsigned long nr_pages)
nr_pages -= pfns;
}
}
+
+/**
+ * clear_subsection_map - Clear subsection map of one memory region
+ *
+ * @pfn - start pfn of the memory range
+ * @nr_pages - number of pfns to add in the region
+ *
+ * This is only intended for hotplug, and clear the related subsection
+ * map inside one section.
+ *
+ * Return:
+ * * -EINVAL - Section already deactived.
+ * * 0 - Subsection map is emptied.
+ * * 1 - Subsection map is not empty.
+ */
+static int clear_subsection_map(unsigned long pfn, unsigned long nr_pages)
+{
+ DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
+ DECLARE_BITMAP(tmp, SUBSECTIONS_PER_SECTION) = { 0 };
+ struct mem_section *ms = __pfn_to_section(pfn);
+ unsigned long *subsection_map = ms->usage
+ ? &ms->usage->subsection_map[0] : NULL;
+
+ subsection_mask_set(map, pfn, nr_pages);
+ if (subsection_map)
+ bitmap_and(tmp, map, subsection_map, SUBSECTIONS_PER_SECTION);
+
+ if (WARN(!subsection_map || !bitmap_equal(tmp, map, SUBSECTIONS_PER_SECTION),
+ "section already deactivated (%#lx + %ld)\n",
+ pfn, nr_pages))
+ return -EINVAL;
+
+ bitmap_xor(subsection_map, map, subsection_map, SUBSECTIONS_PER_SECTION);
+
+ if (bitmap_empty(subsection_map, SUBSECTIONS_PER_SECTION))
+ return 0;
+
+ return 1;
+}
+
+/**
+ * fill_subsection_map - fill subsection map of a memory region
+ * @pfn - start pfn of the memory range
+ * @nr_pages - number of pfns to add in the region
+ *
+ * This fills the related subsection map inside one section, and only
+ * intended for hotplug.
+ *
+ * Return:
+ * * 0 - On success.
+ * * -EINVAL - Invalid memory region.
+ * * -EEXIST - Subsection map has been set.
+ */
+static int fill_subsection_map(unsigned long pfn, unsigned long nr_pages)
+{
+ struct mem_section *ms = __pfn_to_section(pfn);
+ DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
+ unsigned long *subsection_map;
+ int rc = 0;
+
+ subsection_mask_set(map, pfn, nr_pages);
+
+ subsection_map = &ms->usage->subsection_map[0];
+
+ if (bitmap_empty(map, SUBSECTIONS_PER_SECTION))
+ rc = -EINVAL;
+ else if (bitmap_intersects(map, subsection_map, SUBSECTIONS_PER_SECTION))
+ rc = -EEXIST;
+ else
+ bitmap_or(subsection_map, map, subsection_map,
+ SUBSECTIONS_PER_SECTION);
+
+ return rc;
+}
#else
void __init subsection_map_init(unsigned long pfn, unsigned long nr_pages)
{
}
+
+static int clear_subsection_map(unsigned long pfn, unsigned long nr_pages)
+{
+ return 0;
+}
+
+static int fill_subsection_map(unsigned long pfn, unsigned long nr_pages)
+{
+ return 0;
+}
#endif
/* Record a memory area against a node. */
@@ -732,52 +816,6 @@ static void free_map_bootmem(struct page *memmap)
}
#endif /* CONFIG_SPARSEMEM_VMEMMAP */
-#ifdef CONFIG_SPARSEMEM_VMEMMAP
-/**
- * clear_subsection_map - Clear subsection map of one memory region
- *
- * @pfn - start pfn of the memory range
- * @nr_pages - number of pfns to add in the region
- *
- * This is only intended for hotplug, and clear the related subsection
- * map inside one section.
- *
- * Return:
- * * -EINVAL - Section already deactived.
- * * 0 - Subsection map is emptied.
- * * 1 - Subsection map is not empty.
- */
-static int clear_subsection_map(unsigned long pfn, unsigned long nr_pages)
-{
- DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
- DECLARE_BITMAP(tmp, SUBSECTIONS_PER_SECTION) = { 0 };
- struct mem_section *ms = __pfn_to_section(pfn);
- unsigned long *subsection_map = ms->usage
- ? &ms->usage->subsection_map[0] : NULL;
-
- subsection_mask_set(map, pfn, nr_pages);
- if (subsection_map)
- bitmap_and(tmp, map, subsection_map, SUBSECTIONS_PER_SECTION);
-
- if (WARN(!subsection_map || !bitmap_equal(tmp, map, SUBSECTIONS_PER_SECTION),
- "section already deactivated (%#lx + %ld)\n",
- pfn, nr_pages))
- return -EINVAL;
-
- bitmap_xor(subsection_map, map, subsection_map, SUBSECTIONS_PER_SECTION);
-
- if (bitmap_empty(subsection_map, SUBSECTIONS_PER_SECTION))
- return 0;
-
- return 1;
-}
-#else
-static int clear_subsection_map(unsigned long pfn, unsigned long nr_pages)
-{
- return 0;
-}
-#endif
-
/*
* To deactivate a memory region, there are 3 cases to handle across
* two configurations (SPARSEMEM_VMEMMAP={y,n}):
@@ -833,48 +871,6 @@ static void section_deactivate(unsigned long pfn, unsigned long nr_pages,
ms->section_mem_map = (unsigned long)NULL;
}
-#ifdef CONFIG_SPARSEMEM_VMEMMAP
-/**
- * fill_subsection_map - fill subsection map of a memory region
- * @pfn - start pfn of the memory range
- * @nr_pages - number of pfns to add in the region
- *
- * This fills the related subsection map inside one section, and only
- * intended for hotplug.
- *
- * Return:
- * * 0 - On success.
- * * -EINVAL - Invalid memory region.
- * * -EEXIST - Subsection map has been set.
- */
-static int fill_subsection_map(unsigned long pfn, unsigned long nr_pages)
-{
- struct mem_section *ms = __pfn_to_section(pfn);
- DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
- unsigned long *subsection_map;
- int rc = 0;
-
- subsection_mask_set(map, pfn, nr_pages);
-
- subsection_map = &ms->usage->subsection_map[0];
-
- if (bitmap_empty(map, SUBSECTIONS_PER_SECTION))
- rc = -EINVAL;
- else if (bitmap_intersects(map, subsection_map, SUBSECTIONS_PER_SECTION))
- rc = -EEXIST;
- else
- bitmap_or(subsection_map, map, subsection_map,
- SUBSECTIONS_PER_SECTION);
-
- return rc;
-}
-#else
-static int fill_subsection_map(unsigned long pfn, unsigned long nr_pages)
-{
- return 0;
-}
-#endif
-
static struct page * __meminit section_activate(int nid, unsigned long pfn,
unsigned long nr_pages, struct vmem_altmap *altmap)
{
--
2.17.2
next prev parent reply other threads:[~2020-02-20 4:34 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-20 4:33 [PATCH v2 0/7] mm/hotplug: Only use subsection map in VMEMMAP case Baoquan He
2020-02-20 4:33 ` [PATCH v2 1/7] mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case Baoquan He
2020-02-20 6:11 ` Wei Yang
2020-02-20 12:07 ` David Hildenbrand
2020-02-26 12:31 ` David Hildenbrand
2020-02-26 13:07 ` Baoquan He
2020-02-26 18:09 ` Dan Williams
2020-03-03 8:34 ` David Hildenbrand
2020-03-03 8:39 ` Baoquan He
2020-02-20 4:33 ` [PATCH v2 2/7] mm/sparse.c: introduce new function fill_subsection_map() Baoquan He
2020-02-20 6:14 ` Wei Yang
2020-02-28 14:27 ` David Hildenbrand
2020-03-01 4:59 ` Baoquan He
2020-02-20 4:33 ` [PATCH v2 3/7] mm/sparse.c: introduce a new function clear_subsection_map() Baoquan He
2020-02-20 6:15 ` Wei Yang
2020-02-28 14:36 ` David Hildenbrand
2020-03-01 5:20 ` Baoquan He
2020-03-02 15:43 ` David Hildenbrand
2020-03-03 1:53 ` Baoquan He
2020-03-03 8:22 ` Baoquan He
2020-03-03 8:33 ` David Hildenbrand
2020-03-03 8:38 ` Baoquan He
2020-02-20 4:33 ` [PATCH v2 4/7] mm/sparse.c: only use subsection map in VMEMMAP case Baoquan He
2020-02-20 6:17 ` Wei Yang
2020-02-25 9:57 ` Michal Hocko
2020-02-26 3:53 ` Baoquan He
2020-02-26 9:10 ` Michal Hocko
2020-02-28 7:25 ` Baoquan He
2020-02-20 4:33 ` [PATCH v2 5/7] mm/sparse.c: add code comment about sub-section hotplug Baoquan He
2020-02-20 4:33 ` Baoquan He [this message]
2020-02-20 6:18 ` [PATCH v2 6/7] mm/sparse.c: move subsection_map related codes together Wei Yang
2020-02-20 7:04 ` Baoquan He
2020-02-20 7:12 ` Wei Yang
2020-02-20 8:55 ` Baoquan He
2020-02-20 21:52 ` Wei Yang
2020-02-20 4:33 ` [PATCH v2 7/7] mm/sparse.c: Use __get_free_pages() instead in populate_section_memmap() Baoquan He
2020-02-20 10:38 ` [PATCH v2 0/7] mm/hotplug: Only use subsection map in VMEMMAP case Michal Hocko
2020-02-21 14:28 ` Baoquan He
2020-02-25 9:10 ` David Hildenbrand
2020-02-25 10:02 ` Michal Hocko
2020-02-26 3:42 ` Baoquan He
2020-02-26 9:14 ` Michal Hocko
2020-02-26 12:30 ` Baoquan He
2020-02-25 10:03 ` Michal Hocko
2020-02-26 3:44 ` Baoquan He
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200220043316.19668-7-bhe@redhat.com \
--to=bhe@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=dan.j.williams@intel.com \
--cc=david@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=osalvador@suse.de \
--cc=richardw.yang@linux.intel.com \
--cc=robin.murphy@arm.com \
--cc=rppt@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).