* [PATCH] mm, slub: remove slub_memcg_sysfs boot param and CONFIG_SLUB_MEMCG_SYSFS_ON
@ 2021-01-27 12:47 Vlastimil Babka
2021-01-27 18:19 ` Roman Gushchin
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Vlastimil Babka @ 2021-01-27 12:47 UTC (permalink / raw)
To: Christoph Lameter, Pekka Enberg, David Rientjes, Joonsoo Kim,
Andrew Morton
Cc: linux-mm, linux-kernel, Roman Gushchin, Vlastimil Babka
The boot param and config determine the value of memcg_sysfs_enabled, which is
unused since commit 10befea91b61 ("mm: memcg/slab: use a single set of
kmem_caches for all allocations") as there are no per-memcg kmem caches
anymore.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
---
Documentation/admin-guide/kernel-parameters.txt | 8 --------
init/Kconfig | 14 --------------
mm/slub.c | 16 ----------------
3 files changed, 38 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index f4497faef266..7dc351da0005 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4892,14 +4892,6 @@
last alloc / free. For more information see
Documentation/vm/slub.rst.
- slub_memcg_sysfs= [MM, SLUB]
- Determines whether to enable sysfs directories for
- memory cgroup sub-caches. 1 to enable, 0 to disable.
- The default is determined by CONFIG_SLUB_MEMCG_SYSFS_ON.
- Enabling this can lead to a very high number of debug
- directories and files being created under
- /sys/kernel/slub.
-
slub_max_order= [MM, SLUB]
Determines the maximum allowed order for slabs.
A high setting may cause OOMs due to memory
diff --git a/init/Kconfig b/init/Kconfig
index e4e2932da237..af454a51f3c5 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1851,20 +1851,6 @@ config SLUB_DEBUG
SLUB sysfs support. /sys/slab will not exist and there will be
no support for cache validation etc.
-config SLUB_MEMCG_SYSFS_ON
- default n
- bool "Enable memcg SLUB sysfs support by default" if EXPERT
- depends on SLUB && SYSFS && MEMCG
- help
- SLUB creates a directory under /sys/kernel/slab for each
- allocation cache to host info and debug files. If memory
- cgroup is enabled, each cache can have per memory cgroup
- caches. SLUB can create the same sysfs directories for these
- caches under /sys/kernel/slab/CACHE/cgroup but it can lead
- to a very high number of debug files being created. This is
- controlled by slub_memcg_sysfs boot parameter and this
- config option determines the parameter's default value.
-
config COMPAT_BRK
bool "Disable heap randomization"
default y
diff --git a/mm/slub.c b/mm/slub.c
index 1b5148747c64..88782727412c 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -5040,22 +5040,6 @@ enum slab_stat_type {
#define SO_OBJECTS (1 << SL_OBJECTS)
#define SO_TOTAL (1 << SL_TOTAL)
-#ifdef CONFIG_MEMCG
-static bool memcg_sysfs_enabled = IS_ENABLED(CONFIG_SLUB_MEMCG_SYSFS_ON);
-
-static int __init setup_slub_memcg_sysfs(char *str)
-{
- int v;
-
- if (get_option(&str, &v) > 0)
- memcg_sysfs_enabled = v;
-
- return 1;
-}
-
-__setup("slub_memcg_sysfs=", setup_slub_memcg_sysfs);
-#endif
-
static ssize_t show_slab_objects(struct kmem_cache *s,
char *buf, unsigned long flags)
{
--
2.30.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] mm, slub: remove slub_memcg_sysfs boot param and CONFIG_SLUB_MEMCG_SYSFS_ON
2021-01-27 12:47 [PATCH] mm, slub: remove slub_memcg_sysfs boot param and CONFIG_SLUB_MEMCG_SYSFS_ON Vlastimil Babka
@ 2021-01-27 18:19 ` Roman Gushchin
2021-01-27 19:18 ` David Rientjes
2021-01-28 2:25 ` Miaohe Lin
2 siblings, 0 replies; 4+ messages in thread
From: Roman Gushchin @ 2021-01-27 18:19 UTC (permalink / raw)
To: Vlastimil Babka
Cc: Christoph Lameter, Pekka Enberg, David Rientjes, Joonsoo Kim,
Andrew Morton, linux-mm, linux-kernel
On Wed, Jan 27, 2021 at 01:47:45PM +0100, Vlastimil Babka wrote:
> The boot param and config determine the value of memcg_sysfs_enabled, which is
> unused since commit 10befea91b61 ("mm: memcg/slab: use a single set of
> kmem_caches for all allocations") as there are no per-memcg kmem caches
> anymore.
>
> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Nice cleanup!
Acked-by: Roman Gushchin <guro@fb.com>
Thanks, Vlastimil!
> ---
> Documentation/admin-guide/kernel-parameters.txt | 8 --------
> init/Kconfig | 14 --------------
> mm/slub.c | 16 ----------------
> 3 files changed, 38 deletions(-)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index f4497faef266..7dc351da0005 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -4892,14 +4892,6 @@
> last alloc / free. For more information see
> Documentation/vm/slub.rst.
>
> - slub_memcg_sysfs= [MM, SLUB]
> - Determines whether to enable sysfs directories for
> - memory cgroup sub-caches. 1 to enable, 0 to disable.
> - The default is determined by CONFIG_SLUB_MEMCG_SYSFS_ON.
> - Enabling this can lead to a very high number of debug
> - directories and files being created under
> - /sys/kernel/slub.
> -
> slub_max_order= [MM, SLUB]
> Determines the maximum allowed order for slabs.
> A high setting may cause OOMs due to memory
> diff --git a/init/Kconfig b/init/Kconfig
> index e4e2932da237..af454a51f3c5 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -1851,20 +1851,6 @@ config SLUB_DEBUG
> SLUB sysfs support. /sys/slab will not exist and there will be
> no support for cache validation etc.
>
> -config SLUB_MEMCG_SYSFS_ON
> - default n
> - bool "Enable memcg SLUB sysfs support by default" if EXPERT
> - depends on SLUB && SYSFS && MEMCG
> - help
> - SLUB creates a directory under /sys/kernel/slab for each
> - allocation cache to host info and debug files. If memory
> - cgroup is enabled, each cache can have per memory cgroup
> - caches. SLUB can create the same sysfs directories for these
> - caches under /sys/kernel/slab/CACHE/cgroup but it can lead
> - to a very high number of debug files being created. This is
> - controlled by slub_memcg_sysfs boot parameter and this
> - config option determines the parameter's default value.
> -
> config COMPAT_BRK
> bool "Disable heap randomization"
> default y
> diff --git a/mm/slub.c b/mm/slub.c
> index 1b5148747c64..88782727412c 100644
> --- a/mm/slub.c
> +++ b/mm/slub.c
> @@ -5040,22 +5040,6 @@ enum slab_stat_type {
> #define SO_OBJECTS (1 << SL_OBJECTS)
> #define SO_TOTAL (1 << SL_TOTAL)
>
> -#ifdef CONFIG_MEMCG
> -static bool memcg_sysfs_enabled = IS_ENABLED(CONFIG_SLUB_MEMCG_SYSFS_ON);
> -
> -static int __init setup_slub_memcg_sysfs(char *str)
> -{
> - int v;
> -
> - if (get_option(&str, &v) > 0)
> - memcg_sysfs_enabled = v;
> -
> - return 1;
> -}
> -
> -__setup("slub_memcg_sysfs=", setup_slub_memcg_sysfs);
> -#endif
> -
> static ssize_t show_slab_objects(struct kmem_cache *s,
> char *buf, unsigned long flags)
> {
> --
> 2.30.0
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] mm, slub: remove slub_memcg_sysfs boot param and CONFIG_SLUB_MEMCG_SYSFS_ON
2021-01-27 12:47 [PATCH] mm, slub: remove slub_memcg_sysfs boot param and CONFIG_SLUB_MEMCG_SYSFS_ON Vlastimil Babka
2021-01-27 18:19 ` Roman Gushchin
@ 2021-01-27 19:18 ` David Rientjes
2021-01-28 2:25 ` Miaohe Lin
2 siblings, 0 replies; 4+ messages in thread
From: David Rientjes @ 2021-01-27 19:18 UTC (permalink / raw)
To: Vlastimil Babka
Cc: Christoph Lameter, Pekka Enberg, Joonsoo Kim, Andrew Morton,
linux-mm, linux-kernel, Roman Gushchin
On Wed, 27 Jan 2021, Vlastimil Babka wrote:
> The boot param and config determine the value of memcg_sysfs_enabled, which is
> unused since commit 10befea91b61 ("mm: memcg/slab: use a single set of
> kmem_caches for all allocations") as there are no per-memcg kmem caches
> anymore.
>
> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] mm, slub: remove slub_memcg_sysfs boot param and CONFIG_SLUB_MEMCG_SYSFS_ON
2021-01-27 12:47 [PATCH] mm, slub: remove slub_memcg_sysfs boot param and CONFIG_SLUB_MEMCG_SYSFS_ON Vlastimil Babka
2021-01-27 18:19 ` Roman Gushchin
2021-01-27 19:18 ` David Rientjes
@ 2021-01-28 2:25 ` Miaohe Lin
2 siblings, 0 replies; 4+ messages in thread
From: Miaohe Lin @ 2021-01-28 2:25 UTC (permalink / raw)
To: Vlastimil Babka
Cc: linux-mm, linux-kernel, Roman Gushchin, Christoph Lameter,
Pekka Enberg, David Rientjes, Joonsoo Kim, Andrew Morton
Hi:
On 2021/1/27 20:47, Vlastimil Babka wrote:
> The boot param and config determine the value of memcg_sysfs_enabled, which is
> unused since commit 10befea91b61 ("mm: memcg/slab: use a single set of
> kmem_caches for all allocations") as there are no per-memcg kmem caches
> anymore.
>
Good catch. Thanks.
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
> ---
> Documentation/admin-guide/kernel-parameters.txt | 8 --------
> init/Kconfig | 14 --------------
> mm/slub.c | 16 ----------------
> 3 files changed, 38 deletions(-)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index f4497faef266..7dc351da0005 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -4892,14 +4892,6 @@
> last alloc / free. For more information see
> Documentation/vm/slub.rst.
>
> - slub_memcg_sysfs= [MM, SLUB]
> - Determines whether to enable sysfs directories for
> - memory cgroup sub-caches. 1 to enable, 0 to disable.
> - The default is determined by CONFIG_SLUB_MEMCG_SYSFS_ON.
> - Enabling this can lead to a very high number of debug
> - directories and files being created under
> - /sys/kernel/slub.
> -
> slub_max_order= [MM, SLUB]
> Determines the maximum allowed order for slabs.
> A high setting may cause OOMs due to memory
> diff --git a/init/Kconfig b/init/Kconfig
> index e4e2932da237..af454a51f3c5 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -1851,20 +1851,6 @@ config SLUB_DEBUG
> SLUB sysfs support. /sys/slab will not exist and there will be
> no support for cache validation etc.
>
> -config SLUB_MEMCG_SYSFS_ON
> - default n
> - bool "Enable memcg SLUB sysfs support by default" if EXPERT
> - depends on SLUB && SYSFS && MEMCG
> - help
> - SLUB creates a directory under /sys/kernel/slab for each
> - allocation cache to host info and debug files. If memory
> - cgroup is enabled, each cache can have per memory cgroup
> - caches. SLUB can create the same sysfs directories for these
> - caches under /sys/kernel/slab/CACHE/cgroup but it can lead
> - to a very high number of debug files being created. This is
> - controlled by slub_memcg_sysfs boot parameter and this
> - config option determines the parameter's default value.
> -
> config COMPAT_BRK
> bool "Disable heap randomization"
> default y
> diff --git a/mm/slub.c b/mm/slub.c
> index 1b5148747c64..88782727412c 100644
> --- a/mm/slub.c
> +++ b/mm/slub.c
> @@ -5040,22 +5040,6 @@ enum slab_stat_type {
> #define SO_OBJECTS (1 << SL_OBJECTS)
> #define SO_TOTAL (1 << SL_TOTAL)
>
> -#ifdef CONFIG_MEMCG
> -static bool memcg_sysfs_enabled = IS_ENABLED(CONFIG_SLUB_MEMCG_SYSFS_ON);
> -
> -static int __init setup_slub_memcg_sysfs(char *str)
> -{
> - int v;
> -
> - if (get_option(&str, &v) > 0)
> - memcg_sysfs_enabled = v;
> -
> - return 1;
> -}
> -
> -__setup("slub_memcg_sysfs=", setup_slub_memcg_sysfs);
> -#endif
> -
> static ssize_t show_slab_objects(struct kmem_cache *s,
> char *buf, unsigned long flags)
> {
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-01-28 2:25 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-27 12:47 [PATCH] mm, slub: remove slub_memcg_sysfs boot param and CONFIG_SLUB_MEMCG_SYSFS_ON Vlastimil Babka
2021-01-27 18:19 ` Roman Gushchin
2021-01-27 19:18 ` David Rientjes
2021-01-28 2:25 ` Miaohe Lin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).