Re: [PATCH v7 27/27] x86/cet/shstk: Add Shadow Stack instructions to opcode map

[Yu-cheng Yu <yu-cheng.yu@intel.com>]

On Fri, 2019-11-01 at 16:03 +0200, Adrian Hunter wrote:
> On 6/06/19 11:06 PM, Yu-cheng Yu wrote:
> > Add the following shadow stack management instructions.
> > 
> > INCSSP:
> >     Increment shadow stack pointer by the steps specified.
> > 
> > RDSSP:
> >     Read SSP register into a GPR.
> > 
> > SAVEPREVSSP:
> >     Use "prev ssp" token at top of current shadow stack to
> >     create a "restore token" on previous shadow stack.
> > 
> > RSTORSSP:
> >     Restore from a "restore token" pointed by a GPR to SSP.
> > 
> > WRSS:
> >     Write to kernel-mode shadow stack (kernel-mode instruction).
> > 
> > WRUSS:
> >     Write to user-mode shadow stack (kernel-mode instruction).
> > 
> > SETSSBSY:
> >     Verify the "supervisor token" pointed by IA32_PL0_SSP MSR,
> >     if valid, set the token to busy, and set SSP to the value
> >     of IA32_PL0_SSP MSR.
> > 
> > CLRSSBSY:
> >     Verify the "supervisor token" pointed by a GPR, if valid,
> >     clear the busy bit from the token.
> 
> Does the notrack prefix also need to be catered for somehow?

Yes, I will fix it.

> 
> > 
> > Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
> > ---
> >  arch/x86/lib/x86-opcode-map.txt               | 26 +++++++++++++------
> >  tools/objtool/arch/x86/lib/x86-opcode-map.txt | 26 +++++++++++++------
> >  2 files changed, 36 insertions(+), 16 deletions(-)
> > 
> > diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
> > index e0b85930dd77..c5e825d44766 100644
> > --- a/arch/x86/lib/x86-opcode-map.txt
> > +++ b/arch/x86/lib/x86-opcode-map.txt
> > @@ -366,7 +366,7 @@ AVXcode: 1
> >  1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
> >  1c:
> >  1d:
> > -1e:
> > +1e: RDSSP Rd (F3),REX.W
> >  1f: NOP Ev
> >  # 0x0f 0x20-0x2f
> >  20: MOV Rd,Cd
> > @@ -610,7 +610,17 @@ fe: paddd Pq,Qq | vpaddd Vx,Hx,Wx (66),(v1)
> >  ff: UD0
> >  EndTable
> >  
> > -Table: 3-byte opcode 1 (0x0f 0x38)
> > +Table: 3-byte opcode 1 (0x0f 0x01)
> > +Referrer:
> > +AVXcode:
> > +# Skip 0x00-0xe7
> > +e8: SETSSBSY (f3)
> > +e9:
> > +ea: SAVEPREVSSP (f3)
> > +# Skip 0xeb-0xff
> > +EndTable
> > +
> > +Table: 3-byte opcode 2 (0x0f 0x38)
> >  Referrer: 3-byte escape 1
> >  AVXcode: 2
> >  # 0x0f 0x38 0x00-0x0f
> > @@ -789,12 +799,12 @@ f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2)
> >  f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2)
> >  f2: ANDN Gy,By,Ey (v)
> >  f3: Grp17 (1A)
> > -f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
> > -f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
> > +f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSS Pq,Qq (66),REX.W
> > +f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq (66),REX.W
> 
> AFAICT WRSS does not have 66 prefix

I will check.

Thanks,
Yu-cheng