Linux-mm Archive on lore.kernel.org
 help / color / Atom feed
From: Christophe Leroy <christophe.leroy@c-s.fr>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	linux-mm@kvack.org
Subject: [PATCH v4 3/7] powerpc/kuap: Fix set direction in allow/prevent_user_access()
Date: Fri, 24 Jan 2020 11:54:41 +0000 (UTC)
Message-ID: <f4e88ec4941d5facb35ce75026b0112f980086c3.1579866752.git.christophe.leroy@c-s.fr> (raw)
In-Reply-To: <b6f97231868c43b90ae7abe7f68f84d176a8ebe1.1579866752.git.christophe.leroy@c-s.fr>

__builtin_constant_p() always return 0 for pointers, so on RADIX
we always end up opening both direction (by writing 0 in SPR29):

  0000000000000170 <._copy_to_user>:
  ...
   1b0:	4c 00 01 2c 	isync
   1b4:	39 20 00 00 	li      r9,0
   1b8:	7d 3d 03 a6 	mtspr   29,r9
   1bc:	4c 00 01 2c 	isync
   1c0:	48 00 00 01 	bl      1c0 <._copy_to_user+0x50>
  			1c0: R_PPC64_REL24	.__copy_tofrom_user
  ...
  0000000000000220 <._copy_from_user>:
  ...
   2ac:	4c 00 01 2c 	isync
   2b0:	39 20 00 00 	li      r9,0
   2b4:	7d 3d 03 a6 	mtspr   29,r9
   2b8:	4c 00 01 2c 	isync
   2bc:	7f c5 f3 78 	mr      r5,r30
   2c0:	7f 83 e3 78 	mr      r3,r28
   2c4:	48 00 00 01 	bl      2c4 <._copy_from_user+0xa4>
  			2c4: R_PPC64_REL24	.__copy_tofrom_user
  ...

Use an explicit parameter for direction selection, so that GCC
is able to see it is a constant:

  00000000000001b0 <._copy_to_user>:
  ...
   1f0:	4c 00 01 2c 	isync
   1f4:	3d 20 40 00 	lis     r9,16384
   1f8:	79 29 07 c6 	rldicr  r9,r9,32,31
   1fc:	7d 3d 03 a6 	mtspr   29,r9
   200:	4c 00 01 2c 	isync
   204:	48 00 00 01 	bl      204 <._copy_to_user+0x54>
  			204: R_PPC64_REL24	.__copy_tofrom_user
  ...
  0000000000000260 <._copy_from_user>:
  ...
   2ec:	4c 00 01 2c 	isync
   2f0:	39 20 ff ff 	li      r9,-1
   2f4:	79 29 00 04 	rldicr  r9,r9,0,0
   2f8:	7d 3d 03 a6 	mtspr   29,r9
   2fc:	4c 00 01 2c 	isync
   300:	7f c5 f3 78 	mr      r5,r30
   304:	7f 83 e3 78 	mr      r3,r28
   308:	48 00 00 01 	bl      308 <._copy_from_user+0xa8>
  			308: R_PPC64_REL24	.__copy_tofrom_user
  ...

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Spell out the directions, s/KUAP_R/KUAP_READ/ etc.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/56743b700c56e5d341468151f0e95ff0c46663cd.1579715466.git.christophe.leroy@c-s.fr
---
v4: taken from powerpc/next-test
---
 arch/powerpc/include/asm/book3s/32/kup.h      | 13 ++++++--
 .../powerpc/include/asm/book3s/64/kup-radix.h | 11 +++----
 arch/powerpc/include/asm/kup.h                | 30 ++++++++++++++-----
 arch/powerpc/include/asm/nohash/32/kup-8xx.h  |  4 +--
 arch/powerpc/include/asm/uaccess.h            |  4 +--
 5 files changed, 43 insertions(+), 19 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/32/kup.h b/arch/powerpc/include/asm/book3s/32/kup.h
index d88008c8eb85..91c8f1d9bcee 100644
--- a/arch/powerpc/include/asm/book3s/32/kup.h
+++ b/arch/powerpc/include/asm/book3s/32/kup.h
@@ -102,11 +102,13 @@ static inline void kuap_update_sr(u32 sr, u32 addr, u32 end)
 	isync();	/* Context sync required after mtsrin() */
 }
 
-static inline void allow_user_access(void __user *to, const void __user *from, u32 size)
+static __always_inline void allow_user_access(void __user *to, const void __user *from,
+					      u32 size, unsigned long dir)
 {
 	u32 addr, end;
 
-	if (__builtin_constant_p(to) && to == NULL)
+	BUILD_BUG_ON(!__builtin_constant_p(dir));
+	if (!(dir & KUAP_WRITE))
 		return;
 
 	addr = (__force u32)to;
@@ -119,11 +121,16 @@ static inline void allow_user_access(void __user *to, const void __user *from, u
 	kuap_update_sr(mfsrin(addr) & ~SR_KS, addr, end);	/* Clear Ks */
 }
 
-static inline void prevent_user_access(void __user *to, const void __user *from, u32 size)
+static __always_inline void prevent_user_access(void __user *to, const void __user *from,
+						u32 size, unsigned long dir)
 {
 	u32 addr = (__force u32)to;
 	u32 end = min(addr + size, TASK_SIZE);
 
+	BUILD_BUG_ON(!__builtin_constant_p(dir));
+	if (!(dir & KUAP_WRITE))
+		return;
+
 	if (!addr || addr >= TASK_SIZE || !size)
 		return;
 
diff --git a/arch/powerpc/include/asm/book3s/64/kup-radix.h b/arch/powerpc/include/asm/book3s/64/kup-radix.h
index dbbd22cb80f5..c8d1076e0ebb 100644
--- a/arch/powerpc/include/asm/book3s/64/kup-radix.h
+++ b/arch/powerpc/include/asm/book3s/64/kup-radix.h
@@ -77,20 +77,21 @@ static inline void set_kuap(unsigned long value)
 	isync();
 }
 
-static inline void allow_user_access(void __user *to, const void __user *from,
-				     unsigned long size)
+static __always_inline void allow_user_access(void __user *to, const void __user *from,
+					      unsigned long size, unsigned long dir)
 {
 	// This is written so we can resolve to a single case at build time
-	if (__builtin_constant_p(to) && to == NULL)
+	BUILD_BUG_ON(!__builtin_constant_p(dir));
+	if (dir == KUAP_READ)
 		set_kuap(AMR_KUAP_BLOCK_WRITE);
-	else if (__builtin_constant_p(from) && from == NULL)
+	else if (dir == KUAP_WRITE)
 		set_kuap(AMR_KUAP_BLOCK_READ);
 	else
 		set_kuap(0);
 }
 
 static inline void prevent_user_access(void __user *to, const void __user *from,
-				       unsigned long size)
+				       unsigned long size, unsigned long dir)
 {
 	set_kuap(AMR_KUAP_BLOCKED);
 }
diff --git a/arch/powerpc/include/asm/kup.h b/arch/powerpc/include/asm/kup.h
index 812e66f31934..94f24928916a 100644
--- a/arch/powerpc/include/asm/kup.h
+++ b/arch/powerpc/include/asm/kup.h
@@ -2,6 +2,10 @@
 #ifndef _ASM_POWERPC_KUP_H_
 #define _ASM_POWERPC_KUP_H_
 
+#define KUAP_READ	1
+#define KUAP_WRITE	2
+#define KUAP_READ_WRITE	(KUAP_READ | KUAP_WRITE)
+
 #ifdef CONFIG_PPC64
 #include <asm/book3s/64/kup-radix.h>
 #endif
@@ -42,9 +46,9 @@ void setup_kuap(bool disabled);
 #else
 static inline void setup_kuap(bool disabled) { }
 static inline void allow_user_access(void __user *to, const void __user *from,
-				     unsigned long size) { }
+				     unsigned long size, unsigned long dir) { }
 static inline void prevent_user_access(void __user *to, const void __user *from,
-				       unsigned long size) { }
+				       unsigned long size, unsigned long dir) { }
 static inline bool
 bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
 {
@@ -54,24 +58,36 @@ bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
 
 static inline void allow_read_from_user(const void __user *from, unsigned long size)
 {
-	allow_user_access(NULL, from, size);
+	allow_user_access(NULL, from, size, KUAP_READ);
 }
 
 static inline void allow_write_to_user(void __user *to, unsigned long size)
 {
-	allow_user_access(to, NULL, size);
+	allow_user_access(to, NULL, size, KUAP_WRITE);
+}
+
+static inline void allow_read_write_user(void __user *to, const void __user *from,
+					 unsigned long size)
+{
+	allow_user_access(to, from, size, KUAP_READ_WRITE);
 }
 
 static inline void prevent_read_from_user(const void __user *from, unsigned long size)
 {
-	prevent_user_access(NULL, from, size);
+	prevent_user_access(NULL, from, size, KUAP_READ);
 }
 
 static inline void prevent_write_to_user(void __user *to, unsigned long size)
 {
-	prevent_user_access(to, NULL, size);
+	prevent_user_access(to, NULL, size, KUAP_WRITE);
+}
+
+static inline void prevent_read_write_user(void __user *to, const void __user *from,
+					   unsigned long size)
+{
+	prevent_user_access(to, from, size, KUAP_READ_WRITE);
 }
 
 #endif /* !__ASSEMBLY__ */
 
-#endif /* _ASM_POWERPC_KUP_H_ */
+#endif /* _ASM_POWERPC_KUAP_H_ */
diff --git a/arch/powerpc/include/asm/nohash/32/kup-8xx.h b/arch/powerpc/include/asm/nohash/32/kup-8xx.h
index f2fea603b929..1d70c80366fd 100644
--- a/arch/powerpc/include/asm/nohash/32/kup-8xx.h
+++ b/arch/powerpc/include/asm/nohash/32/kup-8xx.h
@@ -35,13 +35,13 @@
 #include <asm/reg.h>
 
 static inline void allow_user_access(void __user *to, const void __user *from,
-				     unsigned long size)
+				     unsigned long size, unsigned long dir)
 {
 	mtspr(SPRN_MD_AP, MD_APG_INIT);
 }
 
 static inline void prevent_user_access(void __user *to, const void __user *from,
-				       unsigned long size)
+				       unsigned long size, unsigned long dir)
 {
 	mtspr(SPRN_MD_AP, MD_APG_KUAP);
 }
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index c92fe7fe9692..cafad1960e76 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -313,9 +313,9 @@ raw_copy_in_user(void __user *to, const void __user *from, unsigned long n)
 	unsigned long ret;
 
 	barrier_nospec();
-	allow_user_access(to, from, n);
+	allow_read_write_user(to, from, n);
 	ret = __copy_tofrom_user(to, from, n);
-	prevent_user_access(to, from, n);
+	prevent_read_write_user(to, from, n);
 	return ret;
 }
 #endif /* __powerpc64__ */
-- 
2.25.0



  parent reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-24 11:54 [PATCH v4 1/7] readdir: make user_access_begin() use the real access range Christophe Leroy
2020-01-24 11:54 ` [PATCH v4 2/7] powerpc/32s: Fix bad_kuap_fault() Christophe Leroy
2020-02-04 12:03   ` Michael Ellerman
2020-01-24 11:54 ` Christophe Leroy [this message]
2020-01-24 11:54 ` [PATCH v4 4/7] powerpc/32s: Drop NULL addr verification Christophe Leroy
2020-01-24 11:54 ` [PATCH v4 5/7] powerpc/32s: prepare prevent_user_access() for user_access_end() Christophe Leroy
2020-01-24 11:54 ` [PATCH v4 6/7] powerpc: Implement user_access_begin and friends Christophe Leroy
2020-01-24 11:54 ` [PATCH v4 7/7] powerpc: Implement user_access_save() and user_access_restore() Christophe Leroy

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f4e88ec4941d5facb35ce75026b0112f980086c3.1579866752.git.christophe.leroy@c-s.fr \
    --to=christophe.leroy@c-s.fr \
    --cc=benh@kernel.crashing.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mm Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mm/0 linux-mm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mm linux-mm/ https://lore.kernel.org/linux-mm \
		linux-mm@kvack.org
	public-inbox-index linux-mm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kvack.linux-mm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git