[PATCH AUTOSEL 4.14 081/115] mmc: tmio: Fix SCC error detection

[PATCH AUTOSEL 4.14 081/115] mmc: tmio: Fix SCC error detection

[Sasha Levin]

From: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>

[ Upstream commit b85fb0a1c8aeaaa40d08945d51a6656b512173f0 ]

SDR104, HS200 and HS400 need to check for SCC error. If SCC error is
detected, retuning is necessary.

Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
[Niklas: update commit message]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/tmio_mmc_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 2437fcde915a7..01e51b7945750 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -914,8 +914,8 @@ static void tmio_mmc_finish_request(struct tmio_mmc_host *host)
 	if (mrq->cmd->error || (mrq->data && mrq->data->error))
 		tmio_mmc_abort_dma(host);
 
-	if (host->check_scc_error)
-		host->check_scc_error(host);
+	if (host->check_scc_error && host->check_scc_error(host))
+		mrq->cmd->error = -EILSEQ;
 
 	/* If SET_BLOCK_COUNT, continue with main command */
 	if (host->mrq && !mrq->cmd->error) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 115/115] mmc: tmio: fix SCC error handling to avoid false positive CRC error

[Sasha Levin]

From: Takeshi Saito <takeshi.saito.xv@renesas.com>

[ Upstream commit 51b72656bb39fdcb8f3174f4007bcc83ad1d275f ]

If an SCC error occurs during a read/write command execution, a false
positive CRC error message is output.

mmcblk0: response CRC error sending r/w cmd command, card status 0x900

check_scc_error() checks SCC_RVSREQ.RVSERR bit. RVSERR detects a
correction error in the next (up or down) delay tap position. However,
since the command is successful, only retuning needs to be executed.
This has been confirmed by HW engineers.

Thus, on SCC error, set retuning flag instead of setting an error code.

Fixes: b85fb0a1c8ae ("mmc: tmio: Fix SCC error detection")
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
[wsa: updated comment and commit message, removed some braces]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/tmio_mmc_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 01e51b7945750..2fd862dc97701 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -914,8 +914,9 @@ static void tmio_mmc_finish_request(struct tmio_mmc_host *host)
 	if (mrq->cmd->error || (mrq->data && mrq->data->error))
 		tmio_mmc_abort_dma(host);
 
+	/* SCC error means retune, but executed command was still successful */
 	if (host->check_scc_error && host->check_scc_error(host))
-		mrq->cmd->error = -EILSEQ;
+		mmc_retune_needed(host->mmc);
 
 	/* If SET_BLOCK_COUNT, continue with main command */
 	if (host->mrq && !mrq->cmd->error) {
-- 
2.20.1