Linux-mmc Archive on lore.kernel.org
 help / color / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: Ulf Hansson <ulf.hansson@linaro.org>, linux-mmc@vger.kernel.org
Cc: "Matthias Brugger" <matthias.bgg@gmail.com>,
	"Mauro Carvalho Chehab" <mchehab@kernel.org>,
	"Kalle Valo" <kvalo@codeaurora.org>,
	"Amitkumar Karwar" <amitkarwar@gmail.com>,
	"Ganapathi Bhat" <ganapathi.bhat@nxp.com>,
	"Xinming Hu" <huxinming820@gmail.com>,
	linux-kernel@vger.kernel.org, ath10k@lists.infradead.org,
	b43-dev@lists.infradead.org, brcm80211-dev-list.pdl@broadcom.com,
	brcm80211-dev-list@cypress.com, libertas-dev@lists.infradead.org,
	linux-wireless@vger.kernel.org,
	"Marek Behún" <marek.behun@nic.cz>
Subject: [PATCH 08/11] mmc: sdio: Move SDIO IDs from ath10k driver to common include file
Date: Fri, 22 May 2020 16:44:09 +0200
Message-ID: <20200522144412.19712-9-pali@kernel.org> (raw)
In-Reply-To: <20200522144412.19712-1-pali@kernel.org>

Also replace generic MANUFACTURER macros by proper SDIO IDs macros.

Checks for device IDs are slightly modified to use SDIO device IDs.
This allows removal of all custom MANUFACTURER macros from ath10k.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 drivers/net/wireless/ath/ath10k/sdio.c | 25 ++++++++++---------------
 drivers/net/wireless/ath/ath10k/sdio.h |  8 --------
 include/linux/mmc/sdio_ids.h           |  2 ++
 3 files changed, 12 insertions(+), 23 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 1f709b65c29b..59e725515041 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -1083,10 +1083,10 @@ static void ath10k_sdio_set_mbox_info(struct ath10k *ar)
 
 	mbox_info->ext_info[0].htc_ext_addr = ATH10K_HIF_MBOX0_EXT_BASE_ADDR;
 
-	dev_id_base = FIELD_GET(QCA_MANUFACTURER_ID_BASE, device);
-	dev_id_chiprev = FIELD_GET(QCA_MANUFACTURER_ID_REV_MASK, device);
+	dev_id_base = (device & 0x0F00);
+	dev_id_chiprev = (device & 0x00FF);
 	switch (dev_id_base) {
-	case QCA_MANUFACTURER_ID_AR6005_BASE:
+	case (SDIO_DEVICE_ID_ATHEROS_AR6005 & 0x0F00):
 		if (dev_id_chiprev < 4)
 			mbox_info->ext_info[0].htc_ext_sz =
 				ATH10K_HIF_MBOX0_EXT_WIDTH;
@@ -1097,7 +1097,7 @@ static void ath10k_sdio_set_mbox_info(struct ath10k *ar)
 			mbox_info->ext_info[0].htc_ext_sz =
 				ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0;
 		break;
-	case QCA_MANUFACTURER_ID_QCA9377_BASE:
+	case (SDIO_DEVICE_ID_ATHEROS_QCA9377 & 0x0F00):
 		mbox_info->ext_info[0].htc_ext_sz =
 			ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0;
 		break;
@@ -2185,19 +2185,16 @@ static int ath10k_sdio_probe(struct sdio_func *func,
 	skb_queue_head_init(&ar_sdio->rx_head);
 	INIT_WORK(&ar_sdio->async_work_rx, ath10k_rx_indication_async_work);
 
-	dev_id_base = FIELD_GET(QCA_MANUFACTURER_ID_BASE, id->device);
-	switch (dev_id_base) {
-	case QCA_MANUFACTURER_ID_AR6005_BASE:
-	case QCA_MANUFACTURER_ID_QCA9377_BASE:
-		ar->dev_id = QCA9377_1_0_DEVICE_ID;
-		break;
-	default:
+	dev_id_base = (id->device & 0x0F00);
+	if (dev_id_base != (SDIO_DEVICE_ID_ATHEROS_AR6005 & 0x0F00) &&
+	    dev_id_base != (SDIO_DEVICE_ID_ATHEROS_QCA9377 & 0x0F00)) {
 		ret = -ENODEV;
 		ath10k_err(ar, "unsupported device id %u (0x%x)\n",
 			   dev_id_base, id->device);
 		goto err_free_wq;
 	}
 
+	ar->dev_id = QCA9377_1_0_DEVICE_ID;
 	ar->id.vendor = id->vendor;
 	ar->id.device = id->device;
 
@@ -2246,10 +2243,8 @@ static void ath10k_sdio_remove(struct sdio_func *func)
 }
 
 static const struct sdio_device_id ath10k_sdio_devices[] = {
-	{SDIO_DEVICE(QCA_MANUFACTURER_CODE,
-		     (QCA_SDIO_ID_AR6005_BASE | 0xA))},
-	{SDIO_DEVICE(QCA_MANUFACTURER_CODE,
-		     (QCA_SDIO_ID_QCA9377_BASE | 0x1))},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_AR6005)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_QCA9377)},
 	{},
 };
 
diff --git a/drivers/net/wireless/ath/ath10k/sdio.h b/drivers/net/wireless/ath/ath10k/sdio.h
index 33195f49acab..e8951f9cdb5f 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.h
+++ b/drivers/net/wireless/ath/ath10k/sdio.h
@@ -10,14 +10,6 @@
 
 #define ATH10K_HIF_MBOX_BLOCK_SIZE              256
 
-#define QCA_MANUFACTURER_ID_BASE                GENMASK(11, 8)
-#define QCA_MANUFACTURER_ID_AR6005_BASE         0x5
-#define QCA_MANUFACTURER_ID_QCA9377_BASE        0x7
-#define QCA_SDIO_ID_AR6005_BASE                 0x500
-#define QCA_SDIO_ID_QCA9377_BASE                0x700
-#define QCA_MANUFACTURER_ID_REV_MASK            0x00FF
-#define QCA_MANUFACTURER_CODE                   0x271 /* Qualcomm/Atheros */
-
 #define ATH10K_SDIO_MAX_BUFFER_SIZE             4096 /*Unsure of this constant*/
 
 /* Mailbox address in SDIO address space */
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index 95b67ab7d06a..2894f7739acc 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -33,6 +33,8 @@
 #define SDIO_DEVICE_ID_ATHEROS_AR6004_02	0x0402
 #define SDIO_DEVICE_ID_ATHEROS_AR6004_18	0x0418
 #define SDIO_DEVICE_ID_ATHEROS_AR6004_19	0x0419
+#define SDIO_DEVICE_ID_ATHEROS_AR6005		0x050A
+#define SDIO_DEVICE_ID_ATHEROS_QCA9377		0x0701
 
 #define SDIO_VENDOR_ID_BROADCOM			0x02d0
 #define SDIO_DEVICE_ID_BROADCOM_43143		0xa887
-- 
2.20.1


  parent reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-22 14:44 [PATCH 00/11] mmc: sdio: Move SDIO IDs from drivers " Pali Rohár
2020-05-22 14:44 ` [PATCH 01/11] mmc: sdio: Fix macro name for Marvell device with ID 0x9134 Pali Rohár
2020-05-22 14:44 ` [PATCH 02/11] mmc: sdio: Change macro names for Marvell 8688 modules Pali Rohár
2020-05-22 14:44 ` [PATCH 03/11] mmc: sdio: Move SDIO IDs from mwifiex driver to common include file Pali Rohár
2020-05-25 10:38   ` Kalle Valo
2020-05-22 14:44 ` [PATCH 04/11] mmc: sdio: Move SDIO IDs from btmrvl " Pali Rohár
2020-05-22 14:44 ` [PATCH 05/11] mmc: sdio: Move SDIO IDs from btmtksdio " Pali Rohár
2020-05-22 15:02   ` Matthias Brugger
2020-05-22 14:44 ` [PATCH 06/11] mmc: sdio: Move SDIO IDs from smssdio " Pali Rohár
2020-05-22 14:44 ` [PATCH 07/11] mmc: sdio: Move SDIO IDs from ath6kl " Pali Rohár
2020-05-25 10:38   ` Kalle Valo
2020-05-22 14:44 ` Pali Rohár [this message]
2020-05-22 14:44 ` [PATCH 09/11] mmc: sdio: Move SDIO IDs from b43-sdio " Pali Rohár
2020-05-22 14:44 ` [PATCH 10/11] mmc: sdio: Fix Cypress SDIO IDs macros in " Pali Rohár
2020-05-22 14:44 ` [PATCH 11/11] mmc: sdio: Sort all SDIO IDs " Pali Rohár
2020-05-25  7:15 ` [PATCH 00/11] mmc: sdio: Move SDIO IDs from drivers to " Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200522144412.19712-9-pali@kernel.org \
    --to=pali@kernel.org \
    --cc=amitkarwar@gmail.com \
    --cc=ath10k@lists.infradead.org \
    --cc=b43-dev@lists.infradead.org \
    --cc=brcm80211-dev-list.pdl@broadcom.com \
    --cc=brcm80211-dev-list@cypress.com \
    --cc=ganapathi.bhat@nxp.com \
    --cc=huxinming820@gmail.com \
    --cc=kvalo@codeaurora.org \
    --cc=libertas-dev@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=marek.behun@nic.cz \
    --cc=matthias.bgg@gmail.com \
    --cc=mchehab@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mmc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mmc/0 linux-mmc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mmc linux-mmc/ https://lore.kernel.org/linux-mmc \
		linux-mmc@vger.kernel.org
	public-inbox-index linux-mmc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mmc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git