* [PATCH 0/2] mtd: spinand: macronix: Add MX31LF1GE4BC/MX31UF1GE4BC support
@ 2020-07-22 8:02 YouChing Lin
2020-07-22 8:02 ` [PATCH 1/2] mtd: spinand: macronix: Add support for MX31LF1GE4BC YouChing Lin
2020-07-22 8:02 ` [PATCH 2/2] mtd: spinand: macronix: Add support for MX31UF1GE4BC YouChing Lin
0 siblings, 2 replies; 5+ messages in thread
From: YouChing Lin @ 2020-07-22 8:02 UTC (permalink / raw)
To: miquel.raynal, richard, vigneshr
Cc: juliensu, YouChing Lin, linux-mtd, linux-kernel
Hi,
The Macronix MX31LF1GE4BC/MX31UF1GE4BC are 3V/1.8V, 1Gbit (128MB) serial
NAND flash devices.
Validated by read, erase, read back, write and read back
on Xilinx Zynq PicoZed FPGA board which included
Macronix SPI Host (driver/spi/spi-mxic.c).
Thanks for your time and review.
Best Regards,
YouChing
YouChing Lin (2):
mtd: spinand: macronix: Add support for MX31LF1GE4BC
mtd: spinand: macronix: Add support for MX31UF1GE4BC
drivers/mtd/nand/spi/macronix.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
--
1.9.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] mtd: spinand: macronix: Add support for MX31LF1GE4BC
2020-07-22 8:02 [PATCH 0/2] mtd: spinand: macronix: Add MX31LF1GE4BC/MX31UF1GE4BC support YouChing Lin
@ 2020-07-22 8:02 ` YouChing Lin
2020-09-07 7:22 ` Miquel Raynal
2020-07-22 8:02 ` [PATCH 2/2] mtd: spinand: macronix: Add support for MX31UF1GE4BC YouChing Lin
1 sibling, 1 reply; 5+ messages in thread
From: YouChing Lin @ 2020-07-22 8:02 UTC (permalink / raw)
To: miquel.raynal, richard, vigneshr
Cc: juliensu, YouChing Lin, linux-mtd, linux-kernel
The Macronix MX31LF1GE4BC is a 3V, 1Gbit (128MB) serial
NAND flash device.
Validated by read, erase, read back, write and read back
on Xilinx Zynq PicoZed FPGA board which included
Macronix SPI Host (driver/spi/spi-mxic.c).
Signed-off-by: YouChing Lin <ycllin@mxic.com.tw>
---
drivers/mtd/nand/spi/macronix.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index 0f900f3..c9aa9f4 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -118,6 +118,16 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
&update_cache_variants),
SPINAND_HAS_QE_BIT,
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL)),
+ SPINAND_INFO("MX31LF1GE4BC",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x1e),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0 /*SPINAND_HAS_QE_BIT*/,
+ SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+ mx35lf1ge4ab_ecc_get_status)),
};
static const struct spinand_manufacturer_ops macronix_spinand_manuf_ops = {
--
1.9.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] mtd: spinand: macronix: Add support for MX31UF1GE4BC
2020-07-22 8:02 [PATCH 0/2] mtd: spinand: macronix: Add MX31LF1GE4BC/MX31UF1GE4BC support YouChing Lin
2020-07-22 8:02 ` [PATCH 1/2] mtd: spinand: macronix: Add support for MX31LF1GE4BC YouChing Lin
@ 2020-07-22 8:02 ` YouChing Lin
2020-09-07 7:22 ` Miquel Raynal
1 sibling, 1 reply; 5+ messages in thread
From: YouChing Lin @ 2020-07-22 8:02 UTC (permalink / raw)
To: miquel.raynal, richard, vigneshr
Cc: juliensu, YouChing Lin, linux-mtd, linux-kernel
The Macronix MX31UF1GE4BC is a 1.8V, 1Gbit (128MB) serial
NAND flash device.
Validated by read, erase, read back, write and read back
on Xilinx Zynq PicoZed FPGA board which included
Macronix SPI Host (driver/spi/spi-mxic.c).
Signed-off-by: YouChing Lin <ycllin@mxic.com.tw>
---
drivers/mtd/nand/spi/macronix.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index c9aa9f4..afc631b 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -128,6 +128,16 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
0 /*SPINAND_HAS_QE_BIT*/,
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
mx35lf1ge4ab_ecc_get_status)),
+ SPINAND_INFO("MX31UF1GE4BC",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x9e),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0 /*SPINAND_HAS_QE_BIT*/,
+ SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+ mx35lf1ge4ab_ecc_get_status)),
};
static const struct spinand_manufacturer_ops macronix_spinand_manuf_ops = {
--
1.9.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] mtd: spinand: macronix: Add support for MX31UF1GE4BC
2020-07-22 8:02 ` [PATCH 2/2] mtd: spinand: macronix: Add support for MX31UF1GE4BC YouChing Lin
@ 2020-09-07 7:22 ` Miquel Raynal
0 siblings, 0 replies; 5+ messages in thread
From: Miquel Raynal @ 2020-09-07 7:22 UTC (permalink / raw)
To: YouChing Lin, miquel.raynal, richard, vigneshr
Cc: juliensu, linux-mtd, linux-kernel
On Wed, 2020-07-22 at 08:02:58 UTC, YouChing Lin wrote:
> The Macronix MX31UF1GE4BC is a 1.8V, 1Gbit (128MB) serial
> NAND flash device.
>
> Validated by read, erase, read back, write and read back
> on Xilinx Zynq PicoZed FPGA board which included
> Macronix SPI Host (driver/spi/spi-mxic.c).
>
> Signed-off-by: YouChing Lin <ycllin@mxic.com.tw>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.
Miquel
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] mtd: spinand: macronix: Add support for MX31LF1GE4BC
2020-07-22 8:02 ` [PATCH 1/2] mtd: spinand: macronix: Add support for MX31LF1GE4BC YouChing Lin
@ 2020-09-07 7:22 ` Miquel Raynal
0 siblings, 0 replies; 5+ messages in thread
From: Miquel Raynal @ 2020-09-07 7:22 UTC (permalink / raw)
To: YouChing Lin, miquel.raynal, richard, vigneshr
Cc: juliensu, linux-mtd, linux-kernel
On Wed, 2020-07-22 at 08:02:57 UTC, YouChing Lin wrote:
> The Macronix MX31LF1GE4BC is a 3V, 1Gbit (128MB) serial
> NAND flash device.
>
> Validated by read, erase, read back, write and read back
> on Xilinx Zynq PicoZed FPGA board which included
> Macronix SPI Host (driver/spi/spi-mxic.c).
>
> Signed-off-by: YouChing Lin <ycllin@mxic.com.tw>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.
Miquel
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-09-07 7:23 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-22 8:02 [PATCH 0/2] mtd: spinand: macronix: Add MX31LF1GE4BC/MX31UF1GE4BC support YouChing Lin
2020-07-22 8:02 ` [PATCH 1/2] mtd: spinand: macronix: Add support for MX31LF1GE4BC YouChing Lin
2020-09-07 7:22 ` Miquel Raynal
2020-07-22 8:02 ` [PATCH 2/2] mtd: spinand: macronix: Add support for MX31UF1GE4BC YouChing Lin
2020-09-07 7:22 ` Miquel Raynal
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).