linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Zhengxun Li <zhengxunli@mxic.com.tw>
To: linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org
Cc: tudor.ambarus@microchip.com, miquel.raynal@bootlin.com,
	broonie@kernel.org, jaimeliao@mxic.com.tw,
	Zhengxun Li <zhengxunli@mxic.com.tw>
Subject: [PATCH v3 3/3] spi: mxic: patch for octal DTR mode support
Date: Tue, 20 Apr 2021 14:29:39 +0800	[thread overview]
Message-ID: <1618900179-14546-4-git-send-email-zhengxunli@mxic.com.tw> (raw)
In-Reply-To: <1618900179-14546-1-git-send-email-zhengxunli@mxic.com.tw>

Driver patch for octal DTR mode support.

Owing to the spi_mem_default_supports_op() is not support dtr
operation. Based on Pratyush patch "spi: spi-mem: add spi_mem_dtr
_supports_op()" add spi_mem_dtr_supports_op() to support dtr and
keep checking the buswidth and command bytes.

Signed-off-by: Zhengxun Li <zhengxunli@mxic.com.tw>
---
 drivers/spi/spi-mxic.c | 41 ++++++++++++++++++++++++++++++-----------
 1 file changed, 30 insertions(+), 11 deletions(-)

diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c
index 96b4182..32e757a 100644
--- a/drivers/spi/spi-mxic.c
+++ b/drivers/spi/spi-mxic.c
@@ -335,8 +335,10 @@ static int mxic_spi_data_xfer(struct mxic_spi *mxic, const void *txbuf,
 static bool mxic_spi_mem_supports_op(struct spi_mem *mem,
 				     const struct spi_mem_op *op)
 {
-	if (op->data.buswidth > 4 || op->addr.buswidth > 4 ||
-	    op->dummy.buswidth > 4 || op->cmd.buswidth > 4)
+	bool all_false;
+
+	if (op->data.buswidth > 8 || op->addr.buswidth > 8 ||
+	    op->dummy.buswidth > 8 || op->cmd.buswidth > 8)
 		return false;
 
 	if (op->data.nbytes && op->dummy.nbytes &&
@@ -346,7 +348,13 @@ static bool mxic_spi_mem_supports_op(struct spi_mem *mem,
 	if (op->addr.nbytes > 7)
 		return false;
 
-	return spi_mem_default_supports_op(mem, op);
+	all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr &&
+		    !op->data.dtr;
+
+	if (all_false)
+		return spi_mem_default_supports_op(mem, op);
+	else
+		return spi_mem_dtr_supports_op(mem, op);
 }
 
 static int mxic_spi_mem_exec_op(struct spi_mem *mem,
@@ -355,14 +363,15 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
 	struct mxic_spi *mxic = spi_master_get_devdata(mem->spi->master);
 	int nio = 1, i, ret;
 	u32 ss_ctrl;
-	u8 addr[8];
-	u8 opcode = op->cmd.opcode;
+	u8 addr[8], cmd[2];
 
 	ret = mxic_spi_set_freq(mxic, mem->spi->max_speed_hz);
 	if (ret)
 		return ret;
 
-	if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD))
+	if (mem->spi->mode & (SPI_TX_OCTAL | SPI_RX_OCTAL))
+		nio = 8;
+	else if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD))
 		nio = 4;
 	else if (mem->spi->mode & (SPI_TX_DUAL | SPI_RX_DUAL))
 		nio = 2;
@@ -374,19 +383,25 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
 	       mxic->regs + HC_CFG);
 	writel(HC_EN_BIT, mxic->regs + HC_EN);
 
-	ss_ctrl = OP_CMD_BYTES(1) | OP_CMD_BUSW(fls(op->cmd.buswidth) - 1);
+	ss_ctrl = OP_CMD_BYTES(op->cmd.nbytes) |
+		  OP_CMD_BUSW(fls(op->cmd.buswidth) - 1) |
+		  (op->cmd.dtr ? OP_CMD_DDR : 0);
 
 	if (op->addr.nbytes)
 		ss_ctrl |= OP_ADDR_BYTES(op->addr.nbytes) |
-			   OP_ADDR_BUSW(fls(op->addr.buswidth) - 1);
+			   OP_ADDR_BUSW(fls(op->addr.buswidth) - 1) |
+			   (op->addr.dtr ? OP_ADDR_DDR : 0);
 
 	if (op->dummy.nbytes)
 		ss_ctrl |= OP_DUMMY_CYC(op->dummy.nbytes);
 
 	if (op->data.nbytes) {
-		ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1);
+		ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1) |
+			   (op->data.dtr ? OP_DATA_DDR : 0);
 		if (op->data.dir == SPI_MEM_DATA_IN)
 			ss_ctrl |= OP_READ;
+			if (op->data.dtr)
+				ss_ctrl |= OP_DQS_EN;
 	}
 
 	writel(ss_ctrl, mxic->regs + SS_CTRL(mem->spi->chip_select));
@@ -394,7 +409,10 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
 	writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT,
 	       mxic->regs + HC_CFG);
 
-	ret = mxic_spi_data_xfer(mxic, &opcode, NULL, 1);
+	for (i = 0; i < op->cmd.nbytes; i++)
+		cmd[i] = op->cmd.opcode >> (8 * (op->cmd.nbytes - i - 1));
+
+	ret = mxic_spi_data_xfer(mxic, cmd, NULL, op->cmd.nbytes);
 	if (ret)
 		goto out;
 
@@ -567,7 +585,8 @@ static int mxic_spi_probe(struct platform_device *pdev)
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
 	master->mode_bits = SPI_CPOL | SPI_CPHA |
 			SPI_RX_DUAL | SPI_TX_DUAL |
-			SPI_RX_QUAD | SPI_TX_QUAD;
+			SPI_RX_QUAD | SPI_TX_QUAD |
+			SPI_RX_OCTAL | SPI_TX_OCTAL;
 
 	mxic_spi_hw_init(mxic);
 
-- 
1.9.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply	other threads:[~2021-04-20  6:32 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-20  6:29 [PATCH v3 0/3] Add octal DTR support for Macronix flash Zhengxun Li
2021-04-20  6:29 ` [PATCH v3 1/3] mtd: spi-nor: macronix: add support for Macronix octal dtr operation Zhengxun Li
2021-04-27  2:36   ` Pratyush Yadav
2021-05-04  5:31     ` zhengxunli
2021-05-04  7:42       ` Pratyush Yadav
2021-05-05  8:29         ` zhengxunli
2021-04-20  6:29 ` [PATCH v3 2/3] mtd: spi-nor: macronix: add support for Macronix octaflash series Zhengxun Li
2021-04-27  2:47   ` Pratyush Yadav
2021-05-04  5:38     ` zhengxunli
2021-04-20  6:29 ` Zhengxun Li [this message]
2021-04-26 16:53   ` [PATCH v3 3/3] spi: mxic: patch for octal DTR mode support Mark Brown
2021-04-27  1:48     ` zhengxunli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1618900179-14546-4-git-send-email-zhengxunli@mxic.com.tw \
    --to=zhengxunli@mxic.com.tw \
    --cc=broonie@kernel.org \
    --cc=jaimeliao@mxic.com.tw \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=tudor.ambarus@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).