[PATCH v6 00/13] spi: atmel-quadspi: introduce sam9x60 qspi controller

[PATCH v6 00/13] spi: atmel-quadspi: introduce sam9x60 qspi controller

[Tudor.Ambarus]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Patches from 1 to 11 are minor fixes or cosmetics.
Patches 12 and 13 introduce the sam9x60 qspi controller.

sam9x60 qspi controller tested with sst26vf064b jedec,spi-nor flash.
Backward compatibility test done on sama5d2 qspi controller and
mx25l25635e jedec,spi-nor flash.

v6: patch 13/13: add a caps instance to the sama5d2 entry instead of
allowing caps to be NULL

v5:
- use WICR for sam9x60
- remove ops hooks and introduce caps->has_ricr
- get rid of the cfg struct
- group IO accesses together in atmel_qspi_set_cfg()

v4:
- s/smm/mr, init controller in serial memory mode by default
- drop local variables that kept aq->regs and &pdev->dev, the compiler
  should be smart enough to store them in a register
- introduce QSPI_IFR_TFRTYP_MEM
- add comment saying QSPI_IFR_APBTFRTYP_READ is defined in sam9x60
- s/sama5d2_qspi_modes/atmel_qspi_modes, modes are the same both
  controllers
- fix kernel doc header
- move comment in function body
- collect R-b tags

v3:
- update smm value when different.
- treat just regular spi transfers when introducing sam9x60 qspi IP.
  Mem transfers will be added together with dirmap support.
- reorganize the code and change ops functions pointers to avoid code
  duplication.
- rename aq->clk to aq->pclk to indicate that it's a peripheral clock.
- drop unused and NOP transfer macros.
- add Suggested-by tags, reword some commits.

v2:
- cache MR value,
- drop iomem wrappers,
- make "pclk" clock-name mandatory even for sama5d2,
- rework clock handling,
- reorder setting of register values in set_cfg() calls,
- collect R-b tags.

Tudor Ambarus (13):
  spi: atmel-quadspi: cache MR value to avoid a write access
  spi: atmel-quadspi: order header files inclusion alphabetically
  spi: atmel-quadspi: drop wrappers for iomem accesses
  spi: atmel-quadspi: fix naming scheme
  spi: atmel-quadspi: remove unnecessary cast
  spi: atmel-quadspi: return appropriate error code
  spi: atmel-quadspi: switch to SPDX license identifiers
  spi: atmel-quadspi: rework transfer macros
  dt-bindings: spi: atmel-quadspi: update example to new clock binding
  dt-bindings: spi: atmel-quadspi: make "pclk" mandatory
  spi: atmel-quadspi: add support for named peripheral clock
  dt-bindings: spi: atmel-quadspi: QuadSPI driver for Microchip SAM9X60
  spi: atmel-quadspi: add support for sam9x60 qspi controller

 .../devicetree/bindings/spi/atmel-quadspi.txt      |  12 +-
 drivers/spi/atmel-quadspi.c                        | 270 +++++++++++++--------
 2 files changed, 184 insertions(+), 98 deletions(-)

-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v6 01/13] spi: atmel-quadspi: cache MR value to avoid a write access

[Tudor.Ambarus]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Set the controller by default in Serial Memory Mode (SMM) at probe.
Cache Mode Register (MR) value to avoid write access when setting
the controller in serial memory mode at exec_op().

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v6: no change
v5: collect R-b
v4: s/smm/mr, init controller in serial memory mode by default
v3: update smm value when different. rename mr/smm
v2: cache MR value instead of moving the write access at probe

 drivers/spi/atmel-quadspi.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index ddc712410812..d6864d29f294 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -155,6 +155,7 @@ struct atmel_qspi {
 	struct clk		*clk;
 	struct platform_device	*pdev;
 	u32			pending;
+	u32			mr;
 	struct completion	cmd_completion;
 };
 
@@ -238,7 +239,14 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 	icr = QSPI_ICR_INST(op->cmd.opcode);
 	ifr = QSPI_IFR_INSTEN;
 
-	qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
+	/*
+	 * If the QSPI controller is set in regular SPI mode, set it in
+	 * Serial Memory Mode (SMM).
+	 */
+	if (aq->mr != QSPI_MR_SMM) {
+		qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
+		aq->mr = QSPI_MR_SMM;
+	}
 
 	mode = find_mode(op);
 	if (mode < 0)
@@ -381,6 +389,10 @@ static int atmel_qspi_init(struct atmel_qspi *aq)
 	/* Reset the QSPI controller */
 	qspi_writel(aq, QSPI_CR, QSPI_CR_SWRST);
 
+	/* Set the QSPI controller by default in Serial Memory Mode */
+	qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
+	aq->mr = QSPI_MR_SMM;
+
 	/* Enable the QSPI controller */
 	qspi_writel(aq, QSPI_CR, QSPI_CR_QSPIEN);
 
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v6 01/13] spi: atmel-quadspi: cache MR value to avoid a write access

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 531 bytes --]

On Tue, Feb 05, 2019 at 05:33:06PM +0000, Tudor.Ambarus@microchip.com wrote:
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> 
> Set the controller by default in Serial Memory Mode (SMM) at probe.
> Cache Mode Register (MR) value to avoid write access when setting
> the controller in serial memory mode at exec_op().
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
> v6: no change
> v5: collect R-b

You say you've collected a reviewed-by for this but there's no
reviewed-by on the patch?

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 144 bytes --]

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v6 01/13] spi: atmel-quadspi: cache MR value to avoid a write access

[Tudor.Ambarus]

On 02/06/2019 06:08 PM, Mark Brown wrote:
> On Tue, Feb 05, 2019 at 05:33:06PM +0000, Tudor.Ambarus@microchip.com wrote:
>> From: Tudor Ambarus <tudor.ambarus@microchip.com>
>>
>> Set the controller by default in Serial Memory Mode (SMM) at probe.
>> Cache Mode Register (MR) value to avoid write access when setting
>> the controller in serial memory mode at exec_op().
>>
>> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
>> ---
>> v6: no change
>> v5: collect R-b
> 
> You say you've collected a reviewed-by for this but there's no
> reviewed-by on the patch?
> 

Not intended. 8/13 has the same problem. I guess I added the R-b tags after
formatting the patches, this may explain why they're gone now.

Boris, can you please add your R-b tag on 8/13 too?

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v6 01/13] spi: atmel-quadspi: cache MR value to avoid a write access

[Boris Brezillon]

On Tue, 5 Feb 2019 17:33:06 +0000
<Tudor.Ambarus@microchip.com> wrote:

> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> 
> Set the controller by default in Serial Memory Mode (SMM) at probe.
> Cache Mode Register (MR) value to avoid write access when setting
> the controller in serial memory mode at exec_op().
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>

Add my R-b back

Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

> ---
> v6: no change
> v5: collect R-b
> v4: s/smm/mr, init controller in serial memory mode by default
> v3: update smm value when different. rename mr/smm
> v2: cache MR value instead of moving the write access at probe
> 
>  drivers/spi/atmel-quadspi.c | 14 +++++++++++++-
>  1 file changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
> index ddc712410812..d6864d29f294 100644
> --- a/drivers/spi/atmel-quadspi.c
> +++ b/drivers/spi/atmel-quadspi.c
> @@ -155,6 +155,7 @@ struct atmel_qspi {
>  	struct clk		*clk;
>  	struct platform_device	*pdev;
>  	u32			pending;
> +	u32			mr;
>  	struct completion	cmd_completion;
>  };
>  
> @@ -238,7 +239,14 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
>  	icr = QSPI_ICR_INST(op->cmd.opcode);
>  	ifr = QSPI_IFR_INSTEN;
>  
> -	qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
> +	/*
> +	 * If the QSPI controller is set in regular SPI mode, set it in
> +	 * Serial Memory Mode (SMM).
> +	 */
> +	if (aq->mr != QSPI_MR_SMM) {
> +		qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
> +		aq->mr = QSPI_MR_SMM;
> +	}
>  
>  	mode = find_mode(op);
>  	if (mode < 0)
> @@ -381,6 +389,10 @@ static int atmel_qspi_init(struct atmel_qspi *aq)
>  	/* Reset the QSPI controller */
>  	qspi_writel(aq, QSPI_CR, QSPI_CR_SWRST);
>  
> +	/* Set the QSPI controller by default in Serial Memory Mode */
> +	qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
> +	aq->mr = QSPI_MR_SMM;
> +
>  	/* Enable the QSPI controller */
>  	qspi_writel(aq, QSPI_CR, QSPI_CR_QSPIEN);
>  


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v6 02/13] spi: atmel-quadspi: order header files inclusion alphabetically

[Tudor.Ambarus]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Cosmetic change, no functional change.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
---
v6: no change
v5: no change
v4: no change
v3: no change
v2: collect R-b

 drivers/spi/atmel-quadspi.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index d6864d29f294..7d83ce8747e8 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -22,16 +22,15 @@
  * This driver is based on drivers/mtd/spi-nor/fsl-quadspi.c from Freescale.
  */
 
-#include <linux/kernel.h>
 #include <linux/clk.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
-#include <linux/of.h>
-
 #include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
 #include <linux/spi/spi-mem.h>
 
 /* QSPI register offsets */
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v6 03/13] spi: atmel-quadspi: drop wrappers for iomem accesses

[Tudor.Ambarus]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

The wrappers hid that the accesses are relaxed. Drop them.

Suggested-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
---
v6: no change
v5: no change
v4:
- drop local variable that kept aq->regs, the compiler should be
  smart enough to store it in a register
- collect R-b
v3: no change
v2: new patch

 drivers/spi/atmel-quadspi.c | 45 +++++++++++++++++----------------------------
 1 file changed, 17 insertions(+), 28 deletions(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index 7d83ce8747e8..c745e75b755e 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -175,17 +175,6 @@ static const struct qspi_mode sama5d2_qspi_modes[] = {
 	{ 4, 4, 4, QSPI_IFR_WIDTH_QUAD_CMD },
 };
 
-/* Register access functions */
-static inline u32 qspi_readl(struct atmel_qspi *aq, u32 reg)
-{
-	return readl_relaxed(aq->regs + reg);
-}
-
-static inline void qspi_writel(struct atmel_qspi *aq, u32 reg, u32 value)
-{
-	writel_relaxed(value, aq->regs + reg);
-}
-
 static inline bool is_compatible(const struct spi_mem_op *op,
 				 const struct qspi_mode *mode)
 {
@@ -243,7 +232,7 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 	 * Serial Memory Mode (SMM).
 	 */
 	if (aq->mr != QSPI_MR_SMM) {
-		qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
+		writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR);
 		aq->mr = QSPI_MR_SMM;
 	}
 
@@ -303,17 +292,17 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 		ifr |= QSPI_IFR_TFRTYP_TRSFR_WRITE;
 
 	/* Clear pending interrupts */
-	(void)qspi_readl(aq, QSPI_SR);
+	(void)readl_relaxed(aq->regs + QSPI_SR);
 
 	/* Set QSPI Instruction Frame registers */
-	qspi_writel(aq, QSPI_IAR, iar);
-	qspi_writel(aq, QSPI_ICR, icr);
-	qspi_writel(aq, QSPI_IFR, ifr);
+	writel_relaxed(iar, aq->regs + QSPI_IAR);
+	writel_relaxed(icr, aq->regs + QSPI_ICR);
+	writel_relaxed(ifr, aq->regs + QSPI_IFR);
 
 	/* Skip to the final steps if there is no data */
 	if (op->data.nbytes) {
 		/* Dummy read of QSPI_IFR to synchronize APB and AHB accesses */
-		(void)qspi_readl(aq, QSPI_IFR);
+		(void)readl_relaxed(aq->regs + QSPI_IFR);
 
 		/* Send/Receive data */
 		if (op->data.dir == SPI_MEM_DATA_IN)
@@ -324,22 +313,22 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 				op->data.buf.out, op->data.nbytes);
 
 		/* Release the chip-select */
-		qspi_writel(aq, QSPI_CR, QSPI_CR_LASTXFER);
+		writel_relaxed(QSPI_CR_LASTXFER, aq->regs + QSPI_CR);
 	}
 
 	/* Poll INSTRuction End status */
-	sr = qspi_readl(aq, QSPI_SR);
+	sr = readl_relaxed(aq->regs + QSPI_SR);
 	if ((sr & QSPI_SR_CMD_COMPLETED) == QSPI_SR_CMD_COMPLETED)
 		return err;
 
 	/* Wait for INSTRuction End interrupt */
 	reinit_completion(&aq->cmd_completion);
 	aq->pending = sr & QSPI_SR_CMD_COMPLETED;
-	qspi_writel(aq, QSPI_IER, QSPI_SR_CMD_COMPLETED);
+	writel_relaxed(QSPI_SR_CMD_COMPLETED, aq->regs + QSPI_IER);
 	if (!wait_for_completion_timeout(&aq->cmd_completion,
 					 msecs_to_jiffies(1000)))
 		err = -ETIMEDOUT;
-	qspi_writel(aq, QSPI_IDR, QSPI_SR_CMD_COMPLETED);
+	writel_relaxed(QSPI_SR_CMD_COMPLETED, aq->regs + QSPI_IDR);
 
 	return err;
 }
@@ -378,7 +367,7 @@ static int atmel_qspi_setup(struct spi_device *spi)
 		scbr--;
 
 	scr = QSPI_SCR_SCBR(scbr);
-	qspi_writel(aq, QSPI_SCR, scr);
+	writel_relaxed(scr, aq->regs + QSPI_SCR);
 
 	return 0;
 }
@@ -386,14 +375,14 @@ static int atmel_qspi_setup(struct spi_device *spi)
 static int atmel_qspi_init(struct atmel_qspi *aq)
 {
 	/* Reset the QSPI controller */
-	qspi_writel(aq, QSPI_CR, QSPI_CR_SWRST);
+	writel_relaxed(QSPI_CR_SWRST, aq->regs + QSPI_CR);
 
 	/* Set the QSPI controller by default in Serial Memory Mode */
-	qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
+	writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR);
 	aq->mr = QSPI_MR_SMM;
 
 	/* Enable the QSPI controller */
-	qspi_writel(aq, QSPI_CR, QSPI_CR_QSPIEN);
+	writel_relaxed(QSPI_CR_QSPIEN, aq->regs + QSPI_CR);
 
 	return 0;
 }
@@ -403,8 +392,8 @@ static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id)
 	struct atmel_qspi *aq = (struct atmel_qspi *)dev_id;
 	u32 status, mask, pending;
 
-	status = qspi_readl(aq, QSPI_SR);
-	mask = qspi_readl(aq, QSPI_IMR);
+	status = readl_relaxed(aq->regs + QSPI_SR);
+	mask = readl_relaxed(aq->regs + QSPI_IMR);
 	pending = status & mask;
 
 	if (!pending)
@@ -510,7 +499,7 @@ static int atmel_qspi_remove(struct platform_device *pdev)
 	struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
 
 	spi_unregister_controller(ctrl);
-	qspi_writel(aq, QSPI_CR, QSPI_CR_QSPIDIS);
+	writel_relaxed(QSPI_CR_QSPIDIS, aq->regs + QSPI_CR);
 	clk_disable_unprepare(aq->clk);
 	return 0;
 }
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v6 04/13] spi: atmel-quadspi: fix naming scheme

[Tudor.Ambarus]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Let general names to core drivers.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
---
v6: no change
v5: no change
v4: collect R-b
v3: no change
v2: update after the removing of iomem access wrappers

 drivers/spi/atmel-quadspi.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index c745e75b755e..be1d1ba7898c 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -158,14 +158,14 @@ struct atmel_qspi {
 	struct completion	cmd_completion;
 };
 
-struct qspi_mode {
+struct atmel_qspi_mode {
 	u8 cmd_buswidth;
 	u8 addr_buswidth;
 	u8 data_buswidth;
 	u32 config;
 };
 
-static const struct qspi_mode sama5d2_qspi_modes[] = {
+static const struct atmel_qspi_mode sama5d2_qspi_modes[] = {
 	{ 1, 1, 1, QSPI_IFR_WIDTH_SINGLE_BIT_SPI },
 	{ 1, 1, 2, QSPI_IFR_WIDTH_DUAL_OUTPUT },
 	{ 1, 1, 4, QSPI_IFR_WIDTH_QUAD_OUTPUT },
@@ -175,8 +175,8 @@ static const struct qspi_mode sama5d2_qspi_modes[] = {
 	{ 4, 4, 4, QSPI_IFR_WIDTH_QUAD_CMD },
 };
 
-static inline bool is_compatible(const struct spi_mem_op *op,
-				 const struct qspi_mode *mode)
+static inline bool atmel_qspi_is_compatible(const struct spi_mem_op *op,
+					    const struct atmel_qspi_mode *mode)
 {
 	if (op->cmd.buswidth != mode->cmd_buswidth)
 		return false;
@@ -190,12 +190,12 @@ static inline bool is_compatible(const struct spi_mem_op *op,
 	return true;
 }
 
-static int find_mode(const struct spi_mem_op *op)
+static int atmel_qspi_find_mode(const struct spi_mem_op *op)
 {
 	u32 i;
 
 	for (i = 0; i < ARRAY_SIZE(sama5d2_qspi_modes); i++)
-		if (is_compatible(op, &sama5d2_qspi_modes[i]))
+		if (atmel_qspi_is_compatible(op, &sama5d2_qspi_modes[i]))
 			return i;
 
 	return -1;
@@ -204,7 +204,7 @@ static int find_mode(const struct spi_mem_op *op)
 static bool atmel_qspi_supports_op(struct spi_mem *mem,
 				   const struct spi_mem_op *op)
 {
-	if (find_mode(op) < 0)
+	if (atmel_qspi_find_mode(op) < 0)
 		return false;
 
 	/* special case not supported by hardware */
@@ -236,7 +236,7 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 		aq->mr = QSPI_MR_SMM;
 	}
 
-	mode = find_mode(op);
+	mode = atmel_qspi_find_mode(op);
 	if (mode < 0)
 		return -ENOTSUPP;
 
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v6 05/13] spi: atmel-quadspi: remove unnecessary cast

[Tudor.Ambarus]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

The cast is done implicitly.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
---
v6: no change
v5: no change
v4: no change
v3: no change
v2: collect R-b

 drivers/spi/atmel-quadspi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index be1d1ba7898c..be7f87fd5ac7 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -389,7 +389,7 @@ static int atmel_qspi_init(struct atmel_qspi *aq)
 
 static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id)
 {
-	struct atmel_qspi *aq = (struct atmel_qspi *)dev_id;
+	struct atmel_qspi *aq = dev_id;
 	u32 status, mask, pending;
 
 	status = readl_relaxed(aq->regs + QSPI_SR);
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v6 06/13] spi: atmel-quadspi: return appropriate error code

[Tudor.Ambarus]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Return -ENOTSUPP when atmel_qspi_find_mode() fails. Propagate
the error in atmel_qspi_exec_op().

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
---
v6: no change
v5: no change
v4: no change
v3: no change
v2: collect R-b

 drivers/spi/atmel-quadspi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index be7f87fd5ac7..06c31830d07b 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -198,7 +198,7 @@ static int atmel_qspi_find_mode(const struct spi_mem_op *op)
 		if (atmel_qspi_is_compatible(op, &sama5d2_qspi_modes[i]))
 			return i;
 
-	return -1;
+	return -ENOTSUPP;
 }
 
 static bool atmel_qspi_supports_op(struct spi_mem *mem,
@@ -238,7 +238,7 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 
 	mode = atmel_qspi_find_mode(op);
 	if (mode < 0)
-		return -ENOTSUPP;
+		return mode;
 
 	ifr |= sama5d2_qspi_modes[mode].config;
 
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v6 07/13] spi: atmel-quadspi: switch to SPDX license identifiers

[Tudor.Ambarus]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Adopt the SPDX license identifiers to ease license compliance
management.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
---
v6: no change
v5: no change
v4: no change
v3: no change
v2: collect R-b

 drivers/spi/atmel-quadspi.c | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index 06c31830d07b..ce4f8a648f45 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for Atmel QSPI Controller
  *
@@ -7,18 +8,6 @@
  * Author: Cyrille Pitchen <cyrille.pitchen@atmel.com>
  * Author: Piotr Bugalski <bugalski.piotr@gmail.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- *
  * This driver is based on drivers/mtd/spi-nor/fsl-quadspi.c from Freescale.
  */
 
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v6 08/13] spi: atmel-quadspi: rework transfer macros

[Tudor.Ambarus]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Split the TFRTYP_TRSFR_ bitfields in 2: one bit encoding the
mem/reg transfer type and one bit encoding the direction of
the transfer (read/write).

Remove NOP when setting read transfer type. Remove useless
setting of write transfer type when
op->data.dir == SPI_MEM_DATA_IN && !op->data.nbytes.

QSPI_IFR_TFRTYP_TRSFR_WRITE is specific just to sama5d2 qspi,
rename it to QSPI_IFR_SAMA5D2_WRITE_TRSFR.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v6: no change
v5: collect R-b
v4: introduce QSPI_IFR_TFRTYP_MEM, reword commit
v3: new patch

 drivers/spi/atmel-quadspi.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index ce4f8a648f45..19a3980775ad 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -113,11 +113,8 @@
 #define QSPI_IFR_OPTL_4BIT              (2 << 8)
 #define QSPI_IFR_OPTL_8BIT              (3 << 8)
 #define QSPI_IFR_ADDRL                  BIT(10)
-#define QSPI_IFR_TFRTYP_MASK            GENMASK(13, 12)
-#define QSPI_IFR_TFRTYP_TRSFR_READ      (0 << 12)
-#define QSPI_IFR_TFRTYP_TRSFR_READ_MEM  (1 << 12)
-#define QSPI_IFR_TFRTYP_TRSFR_WRITE     (2 << 12)
-#define QSPI_IFR_TFRTYP_TRSFR_WRITE_MEM (3 << 13)
+#define QSPI_IFR_TFRTYP_MEM		BIT(12)
+#define QSPI_IFR_SAMA5D2_WRITE_TRSFR	BIT(13)
 #define QSPI_IFR_CRM                    BIT(14)
 #define QSPI_IFR_NBDUM_MASK             GENMASK(20, 16)
 #define QSPI_IFR_NBDUM(n)               (((n) << 16) & QSPI_IFR_NBDUM_MASK)
@@ -275,10 +272,8 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 	if (op->data.nbytes)
 		ifr |= QSPI_IFR_DATAEN;
 
-	if (op->data.dir == SPI_MEM_DATA_IN && op->data.nbytes)
-		ifr |= QSPI_IFR_TFRTYP_TRSFR_READ;
-	else
-		ifr |= QSPI_IFR_TFRTYP_TRSFR_WRITE;
+	if (op->data.dir == SPI_MEM_DATA_OUT)
+		ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR;
 
 	/* Clear pending interrupts */
 	(void)readl_relaxed(aq->regs + QSPI_SR);
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v6 09/13] dt-bindings: spi: atmel-quadspi: update example to new clock binding

[Tudor.Ambarus]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Introduced in:
commit b60557876849 ("ARM: dts: at91: sama5d2: switch to new clock binding")

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
---
v6: no change
v5: no change
v4: no change
v3: new patch

 Documentation/devicetree/bindings/spi/atmel-quadspi.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
index b93c1e2f25dd..e9dae6264d89 100644
--- a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
+++ b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
@@ -19,7 +19,7 @@ spi@f0020000 {
 	reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>;
 	reg-names = "qspi_base", "qspi_mmap";
 	interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
-	clocks = <&spi0_clk>;
+	clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-names = "default";
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v6 10/13] dt-bindings: spi: atmel-quadspi: make "pclk" mandatory

[Tudor.Ambarus]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Naming clocks is a good practice. Make "pclk" madatory even if
we support unnamed clock in the driver, to be backward compatible
with old DTs.

Suggested-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
---
v6: no change
v5: no change
v4: add missing semicolon, collect R-b
v3: new patch

 Documentation/devicetree/bindings/spi/atmel-quadspi.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
index e9dae6264d89..50bd257e6826 100644
--- a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
+++ b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
@@ -9,6 +9,7 @@ Required properties:
                   - qspi_mmap: memory mapped address space
 - interrupts:     Should contain the interrupt for the device.
 - clocks:         The phandle of the clock needed by the QSPI controller.
+- clock-names:    Should contain "pclk" for the peripheral clock.
 - #address-cells: Should be <1>.
 - #size-cells:    Should be <0>.
 
@@ -20,6 +21,7 @@ spi@f0020000 {
 	reg-names = "qspi_base", "qspi_mmap";
 	interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
 	clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+	clock-names = "pclk";
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-names = "default";
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v6 11/13] spi: atmel-quadspi: add support for named peripheral clock

[Tudor.Ambarus]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Naming clocks is a good practice. Keep supporting unnamed
peripheral clock, to be backward compatible with old DTs.
While here, rename clk to pclk, to indicate that it is a
peripheral clock.

Suggested-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
---
v6: no change
v5: no change
v4: collect R-b
v3: new patch

 drivers/spi/atmel-quadspi.c | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index 19a3980775ad..336501d962e5 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -137,7 +137,7 @@
 struct atmel_qspi {
 	void __iomem		*regs;
 	void __iomem		*mem;
-	struct clk		*clk;
+	struct clk		*pclk;
 	struct platform_device	*pdev;
 	u32			pending;
 	u32			mr;
@@ -341,7 +341,7 @@ static int atmel_qspi_setup(struct spi_device *spi)
 	if (!spi->max_speed_hz)
 		return -EINVAL;
 
-	src_rate = clk_get_rate(aq->clk);
+	src_rate = clk_get_rate(aq->pclk);
 	if (!src_rate)
 		return -EINVAL;
 
@@ -433,15 +433,18 @@ static int atmel_qspi_probe(struct platform_device *pdev)
 	}
 
 	/* Get the peripheral clock */
-	aq->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(aq->clk)) {
+	aq->pclk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(aq->pclk))
+		aq->pclk = devm_clk_get(&pdev->dev, NULL);
+
+	if (IS_ERR(aq->pclk)) {
 		dev_err(&pdev->dev, "missing peripheral clock\n");
-		err = PTR_ERR(aq->clk);
+		err = PTR_ERR(aq->pclk);
 		goto exit;
 	}
 
 	/* Enable the peripheral clock */
-	err = clk_prepare_enable(aq->clk);
+	err = clk_prepare_enable(aq->pclk);
 	if (err) {
 		dev_err(&pdev->dev, "failed to enable the peripheral clock\n");
 		goto exit;
@@ -452,25 +455,25 @@ static int atmel_qspi_probe(struct platform_device *pdev)
 	if (irq < 0) {
 		dev_err(&pdev->dev, "missing IRQ\n");
 		err = irq;
-		goto disable_clk;
+		goto disable_pclk;
 	}
 	err = devm_request_irq(&pdev->dev, irq, atmel_qspi_interrupt,
 			       0, dev_name(&pdev->dev), aq);
 	if (err)
-		goto disable_clk;
+		goto disable_pclk;
 
 	err = atmel_qspi_init(aq);
 	if (err)
-		goto disable_clk;
+		goto disable_pclk;
 
 	err = spi_register_controller(ctrl);
 	if (err)
-		goto disable_clk;
+		goto disable_pclk;
 
 	return 0;
 
-disable_clk:
-	clk_disable_unprepare(aq->clk);
+disable_pclk:
+	clk_disable_unprepare(aq->pclk);
 exit:
 	spi_controller_put(ctrl);
 
@@ -484,7 +487,7 @@ static int atmel_qspi_remove(struct platform_device *pdev)
 
 	spi_unregister_controller(ctrl);
 	writel_relaxed(QSPI_CR_QSPIDIS, aq->regs + QSPI_CR);
-	clk_disable_unprepare(aq->clk);
+	clk_disable_unprepare(aq->pclk);
 	return 0;
 }
 
@@ -492,7 +495,7 @@ static int __maybe_unused atmel_qspi_suspend(struct device *dev)
 {
 	struct atmel_qspi *aq = dev_get_drvdata(dev);
 
-	clk_disable_unprepare(aq->clk);
+	clk_disable_unprepare(aq->pclk);
 
 	return 0;
 }
@@ -501,7 +504,7 @@ static int __maybe_unused atmel_qspi_resume(struct device *dev)
 {
 	struct atmel_qspi *aq = dev_get_drvdata(dev);
 
-	clk_prepare_enable(aq->clk);
+	clk_prepare_enable(aq->pclk);
 
 	return atmel_qspi_init(aq);
 }
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v6 12/13] dt-bindings: spi: atmel-quadspi: QuadSPI driver for Microchip SAM9X60

[Tudor.Ambarus]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

The sam9x60 qspi controller uses 2 clocks, one for the peripheral register
access, the other for the qspi core and phy. Both are mandatory.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
---
v6: no change
v5: no change
v4: collect R-b
v3: "pclk" was made mandatory in previous patch. Reword clock
descriptions.
v2:
- make "pclk" mandatory even for sama5d2. Unnamed clk will be
supported in the driver.
- drop unneeded example

 Documentation/devicetree/bindings/spi/atmel-quadspi.txt | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
index 50bd257e6826..7c40ea694352 100644
--- a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
+++ b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
@@ -1,15 +1,19 @@
 * Atmel Quad Serial Peripheral Interface (QSPI)
 
 Required properties:
-- compatible:     Should be "atmel,sama5d2-qspi".
+- compatible:     Should be one of the following:
+		  - "atmel,sama5d2-qspi"
+		  - "microchip,sam9x60-qspi"
 - reg:            Should contain the locations and lengths of the base registers
                   and the mapped memory.
 - reg-names:      Should contain the resource reg names:
                   - qspi_base: configuration register address space
                   - qspi_mmap: memory mapped address space
 - interrupts:     Should contain the interrupt for the device.
-- clocks:         The phandle of the clock needed by the QSPI controller.
-- clock-names:    Should contain "pclk" for the peripheral clock.
+- clocks:         Should reference the peripheral clock and the QSPI system
+                  clock if available.
+- clock-names:    Should contain "pclk" for the peripheral clock and "qspick"
+                  for the system clock when available.
 - #address-cells: Should be <1>.
 - #size-cells:    Should be <0>.
 
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v6 13/13] spi: atmel-quadspi: add support for sam9x60 qspi controller

[Tudor.Ambarus]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

The sam9x60 qspi controller uses 2 clocks, one for the peripheral register
access, the other for the qspi core and phy. Both are mandatory. It uses
different transfer type bits in IFR register. It has dedicated registers
to specify a read or a write instruction: Read Instruction Code Register
(RICR) and Write Instruction Code Register (WICR). ICR/RICR/WICR have
identical fields.

Tested with sst26vf064b jedec,spi-nor flash. Backward compatibility test
done on sama5d2 qspi controller and mx25l25635e jedec,spi-nor flash.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v6: add a caps instance to the sama5d2 entry instead of allowing caps
    to be NULL
v5:
- use WICR for sam9x60
- remove ops hooks and introduce caps->has_ricr
- get rid of the cfg struct
- group IO accesses together in atmel_qspi_set_cfg()
v4:
- drop local variables that kept aq->regs and &pdev->dev, the compiler
  should be smart enough to store them in a register
- add comment saying QSPI_IFR_APBTFRTYP_READ is defined in sam9x60
- s/sama5d2_qspi_modes/atmel_qspi_modes, modes are the same both
  controllers
- fix kernel doc header
- move comment in function body
v3:
- reorganize the code and change ops functions pointers to avoid code
  duplication. From the IP perspective, the transfer type bits are
  different, and what registers are written: ricr/wicr instead of icr.
- treat just regular spi transfers. Mem transfers will be added together
  with dirmap support.
v2:
- rework clock handling
- reorder setting of register values in set_cfg() calls -> move functions
  that can fail in the upper part of the function body.

 drivers/spi/atmel-quadspi.c | 163 ++++++++++++++++++++++++++++++++++----------
 1 file changed, 128 insertions(+), 35 deletions(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index 336501d962e5..fffc21cd5f79 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi-mem.h>
 
@@ -35,7 +36,9 @@
 
 #define QSPI_IAR     0x0030  /* Instruction Address Register */
 #define QSPI_ICR     0x0034  /* Instruction Code Register */
+#define QSPI_WICR    0x0034  /* Write Instruction Code Register */
 #define QSPI_IFR     0x0038  /* Instruction Frame Register */
+#define QSPI_RICR    0x003C  /* Read Instruction Code Register */
 
 #define QSPI_SMR     0x0040  /* Scrambling Mode Register */
 #define QSPI_SKR     0x0044  /* Scrambling Key Register */
@@ -88,7 +91,7 @@
 #define QSPI_SCR_DLYBS_MASK             GENMASK(23, 16)
 #define QSPI_SCR_DLYBS(n)               (((n) << 16) & QSPI_SCR_DLYBS_MASK)
 
-/* Bitfields in QSPI_ICR (Instruction Code Register) */
+/* Bitfields in QSPI_ICR (Read/Write Instruction Code Register) */
 #define QSPI_ICR_INST_MASK              GENMASK(7, 0)
 #define QSPI_ICR_INST(inst)             (((inst) << 0) & QSPI_ICR_INST_MASK)
 #define QSPI_ICR_OPT_MASK               GENMASK(23, 16)
@@ -118,6 +121,7 @@
 #define QSPI_IFR_CRM                    BIT(14)
 #define QSPI_IFR_NBDUM_MASK             GENMASK(20, 16)
 #define QSPI_IFR_NBDUM(n)               (((n) << 16) & QSPI_IFR_NBDUM_MASK)
+#define QSPI_IFR_APBTFRTYP_READ		BIT(24)	/* Defined in SAM9X60 */
 
 /* Bitfields in QSPI_SMR (Scrambling Mode Register) */
 #define QSPI_SMR_SCREN                  BIT(0)
@@ -133,12 +137,18 @@
 #define QSPI_WPSR_WPVSRC_MASK           GENMASK(15, 8)
 #define QSPI_WPSR_WPVSRC(src)           (((src) << 8) & QSPI_WPSR_WPVSRC)
 
+struct atmel_qspi_caps {
+	bool has_qspick;
+	bool has_ricr;
+};
 
 struct atmel_qspi {
 	void __iomem		*regs;
 	void __iomem		*mem;
 	struct clk		*pclk;
+	struct clk		*qspick;
 	struct platform_device	*pdev;
+	const struct atmel_qspi_caps *caps;
 	u32			pending;
 	u32			mr;
 	struct completion	cmd_completion;
@@ -151,7 +161,7 @@ struct atmel_qspi_mode {
 	u32 config;
 };
 
-static const struct atmel_qspi_mode sama5d2_qspi_modes[] = {
+static const struct atmel_qspi_mode atmel_qspi_modes[] = {
 	{ 1, 1, 1, QSPI_IFR_WIDTH_SINGLE_BIT_SPI },
 	{ 1, 1, 2, QSPI_IFR_WIDTH_DUAL_OUTPUT },
 	{ 1, 1, 4, QSPI_IFR_WIDTH_QUAD_OUTPUT },
@@ -180,8 +190,8 @@ static int atmel_qspi_find_mode(const struct spi_mem_op *op)
 {
 	u32 i;
 
-	for (i = 0; i < ARRAY_SIZE(sama5d2_qspi_modes); i++)
-		if (atmel_qspi_is_compatible(op, &sama5d2_qspi_modes[i]))
+	for (i = 0; i < ARRAY_SIZE(atmel_qspi_modes); i++)
+		if (atmel_qspi_is_compatible(op, &atmel_qspi_modes[i]))
 			return i;
 
 	return -ENOTSUPP;
@@ -201,36 +211,37 @@ static bool atmel_qspi_supports_op(struct spi_mem *mem,
 	return true;
 }
 
-static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
+static int atmel_qspi_set_cfg(struct atmel_qspi *aq,
+			      const struct spi_mem_op *op, u32 *offset)
 {
-	struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->master);
-	int mode;
+	u32 iar, icr, ifr;
 	u32 dummy_cycles = 0;
-	u32 iar, icr, ifr, sr;
-	int err = 0;
+	int mode;
 
 	iar = 0;
 	icr = QSPI_ICR_INST(op->cmd.opcode);
 	ifr = QSPI_IFR_INSTEN;
 
-	/*
-	 * If the QSPI controller is set in regular SPI mode, set it in
-	 * Serial Memory Mode (SMM).
-	 */
-	if (aq->mr != QSPI_MR_SMM) {
-		writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR);
-		aq->mr = QSPI_MR_SMM;
-	}
-
 	mode = atmel_qspi_find_mode(op);
 	if (mode < 0)
 		return mode;
-
-	ifr |= sama5d2_qspi_modes[mode].config;
+	ifr |= atmel_qspi_modes[mode].config;
 
 	if (op->dummy.buswidth && op->dummy.nbytes)
 		dummy_cycles = op->dummy.nbytes * 8 / op->dummy.buswidth;
 
+	/*
+	 * The controller allows 24 and 32-bit addressing while NAND-flash
+	 * requires 16-bit long. Handling 8-bit long addresses is done using
+	 * the option field. For the 16-bit addresses, the workaround depends
+	 * of the number of requested dummy bits. If there are 8 or more dummy
+	 * cycles, the address is shifted and sent with the first dummy byte.
+	 * Otherwise opcode is disabled and the first byte of the address
+	 * contains the command opcode (works only if the opcode and address
+	 * use the same buswidth). The limitation is when the 16-bit address is
+	 * used without enough dummy cycles and the opcode is using a different
+	 * buswidth than the address.
+	 */
 	if (op->addr.buswidth) {
 		switch (op->addr.nbytes) {
 		case 0:
@@ -264,6 +275,9 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 		}
 	}
 
+	/* offset of the data access in the QSPI memory space */
+	*offset = iar;
+
 	/* Set number of dummy cycles */
 	if (dummy_cycles)
 		ifr |= QSPI_IFR_NBDUM(dummy_cycles);
@@ -272,16 +286,51 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 	if (op->data.nbytes)
 		ifr |= QSPI_IFR_DATAEN;
 
-	if (op->data.dir == SPI_MEM_DATA_OUT)
-		ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR;
+	/*
+	 * If the QSPI controller is set in regular SPI mode, set it in
+	 * Serial Memory Mode (SMM).
+	 */
+	if (aq->mr != QSPI_MR_SMM) {
+		writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR);
+		aq->mr = QSPI_MR_SMM;
+	}
 
 	/* Clear pending interrupts */
 	(void)readl_relaxed(aq->regs + QSPI_SR);
 
-	/* Set QSPI Instruction Frame registers */
-	writel_relaxed(iar, aq->regs + QSPI_IAR);
-	writel_relaxed(icr, aq->regs + QSPI_ICR);
-	writel_relaxed(ifr, aq->regs + QSPI_IFR);
+	if (aq->caps->has_ricr) {
+		if (!op->addr.nbytes && op->data.dir == SPI_MEM_DATA_IN)
+			ifr |= QSPI_IFR_APBTFRTYP_READ;
+
+		/* Set QSPI Instruction Frame registers */
+		writel_relaxed(iar, aq->regs + QSPI_IAR);
+		if (op->data.dir == SPI_MEM_DATA_IN)
+			writel_relaxed(icr, aq->regs + QSPI_RICR);
+		else
+			writel_relaxed(icr, aq->regs + QSPI_WICR);
+		writel_relaxed(ifr, aq->regs + QSPI_IFR);
+	} else {
+		if (op->data.dir == SPI_MEM_DATA_OUT)
+			ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR;
+
+		/* Set QSPI Instruction Frame registers */
+		writel_relaxed(iar, aq->regs + QSPI_IAR);
+		writel_relaxed(icr, aq->regs + QSPI_ICR);
+		writel_relaxed(ifr, aq->regs + QSPI_IFR);
+	}
+
+	return 0;
+}
+
+static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->master);
+	u32 sr, offset;
+	int err;
+
+	err = atmel_qspi_set_cfg(aq, op, &offset);
+	if (err)
+		return err;
 
 	/* Skip to the final steps if there is no data */
 	if (op->data.nbytes) {
@@ -290,11 +339,11 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 
 		/* Send/Receive data */
 		if (op->data.dir == SPI_MEM_DATA_IN)
-			_memcpy_fromio(op->data.buf.in,
-				aq->mem + iar, op->data.nbytes);
+			_memcpy_fromio(op->data.buf.in, aq->mem + offset,
+				       op->data.nbytes);
 		else
-			_memcpy_toio(aq->mem + iar,
-				op->data.buf.out, op->data.nbytes);
+			_memcpy_toio(aq->mem + offset, op->data.buf.out,
+				     op->data.nbytes);
 
 		/* Release the chip-select */
 		writel_relaxed(QSPI_CR_LASTXFER, aq->regs + QSPI_CR);
@@ -450,28 +499,55 @@ static int atmel_qspi_probe(struct platform_device *pdev)
 		goto exit;
 	}
 
+	aq->caps = of_device_get_match_data(&pdev->dev);
+	if (!aq->caps) {
+		dev_err(&pdev->dev, "Could not retrieve QSPI caps\n");
+		err = -EINVAL;
+		goto exit;
+	}
+
+	if (aq->caps->has_qspick) {
+		/* Get the QSPI system clock */
+		aq->qspick = devm_clk_get(&pdev->dev, "qspick");
+		if (IS_ERR(aq->qspick)) {
+			dev_err(&pdev->dev, "missing system clock\n");
+			err = PTR_ERR(aq->qspick);
+			goto disable_pclk;
+		}
+
+		/* Enable the QSPI system clock */
+		err = clk_prepare_enable(aq->qspick);
+		if (err) {
+			dev_err(&pdev->dev,
+				"failed to enable the QSPI system clock\n");
+			goto disable_pclk;
+		}
+	}
+
 	/* Request the IRQ */
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "missing IRQ\n");
 		err = irq;
-		goto disable_pclk;
+		goto disable_qspick;
 	}
 	err = devm_request_irq(&pdev->dev, irq, atmel_qspi_interrupt,
 			       0, dev_name(&pdev->dev), aq);
 	if (err)
-		goto disable_pclk;
+		goto disable_qspick;
 
 	err = atmel_qspi_init(aq);
 	if (err)
-		goto disable_pclk;
+		goto disable_qspick;
 
 	err = spi_register_controller(ctrl);
 	if (err)
-		goto disable_pclk;
+		goto disable_qspick;
 
 	return 0;
 
+disable_qspick:
+	clk_disable_unprepare(aq->qspick);
 disable_pclk:
 	clk_disable_unprepare(aq->pclk);
 exit:
@@ -487,6 +563,7 @@ static int atmel_qspi_remove(struct platform_device *pdev)
 
 	spi_unregister_controller(ctrl);
 	writel_relaxed(QSPI_CR_QSPIDIS, aq->regs + QSPI_CR);
+	clk_disable_unprepare(aq->qspick);
 	clk_disable_unprepare(aq->pclk);
 	return 0;
 }
@@ -495,6 +572,7 @@ static int __maybe_unused atmel_qspi_suspend(struct device *dev)
 {
 	struct atmel_qspi *aq = dev_get_drvdata(dev);
 
+	clk_disable_unprepare(aq->qspick);
 	clk_disable_unprepare(aq->pclk);
 
 	return 0;
@@ -505,6 +583,7 @@ static int __maybe_unused atmel_qspi_resume(struct device *dev)
 	struct atmel_qspi *aq = dev_get_drvdata(dev);
 
 	clk_prepare_enable(aq->pclk);
+	clk_prepare_enable(aq->qspick);
 
 	return atmel_qspi_init(aq);
 }
@@ -512,8 +591,22 @@ static int __maybe_unused atmel_qspi_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
 			 atmel_qspi_resume);
 
+static const struct atmel_qspi_caps atmel_sama5d2_qspi_caps = {};
+
+static const struct atmel_qspi_caps atmel_sam9x60_qspi_caps = {
+	.has_qspick = true,
+	.has_ricr = true,
+};
+
 static const struct of_device_id atmel_qspi_dt_ids[] = {
-	{ .compatible = "atmel,sama5d2-qspi" },
+	{
+		.compatible = "atmel,sama5d2-qspi",
+		.data = &atmel_sama5d2_qspi_caps,
+	},
+	{
+		.compatible = "microchip,sam9x60-qspi",
+		.data = &atmel_sam9x60_qspi_caps,
+	},
 	{ /* sentinel */ }
 };
 
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v6 13/13] spi: atmel-quadspi: add support for sam9x60 qspi controller

[Boris Brezillon]

On Tue, 5 Feb 2019 17:33:38 +0000
<Tudor.Ambarus@microchip.com> wrote:

> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> 
> The sam9x60 qspi controller uses 2 clocks, one for the peripheral register
> access, the other for the qspi core and phy. Both are mandatory. It uses
> different transfer type bits in IFR register. It has dedicated registers
> to specify a read or a write instruction: Read Instruction Code Register
> (RICR) and Write Instruction Code Register (WICR). ICR/RICR/WICR have
> identical fields.
> 
> Tested with sst26vf064b jedec,spi-nor flash. Backward compatibility test
> done on sama5d2 qspi controller and mx25l25635e jedec,spi-nor flash.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>

Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

> ---
> v6: add a caps instance to the sama5d2 entry instead of allowing caps
>     to be NULL
> v5:
> - use WICR for sam9x60
> - remove ops hooks and introduce caps->has_ricr
> - get rid of the cfg struct
> - group IO accesses together in atmel_qspi_set_cfg()
> v4:
> - drop local variables that kept aq->regs and &pdev->dev, the compiler
>   should be smart enough to store them in a register
> - add comment saying QSPI_IFR_APBTFRTYP_READ is defined in sam9x60
> - s/sama5d2_qspi_modes/atmel_qspi_modes, modes are the same both
>   controllers
> - fix kernel doc header
> - move comment in function body
> v3:
> - reorganize the code and change ops functions pointers to avoid code
>   duplication. From the IP perspective, the transfer type bits are
>   different, and what registers are written: ricr/wicr instead of icr.
> - treat just regular spi transfers. Mem transfers will be added together
>   with dirmap support.
> v2:
> - rework clock handling
> - reorder setting of register values in set_cfg() calls -> move functions
>   that can fail in the upper part of the function body.
> 
>  drivers/spi/atmel-quadspi.c | 163 ++++++++++++++++++++++++++++++++++----------
>  1 file changed, 128 insertions(+), 35 deletions(-)
> 
> diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
> index 336501d962e5..fffc21cd5f79 100644
> --- a/drivers/spi/atmel-quadspi.c
> +++ b/drivers/spi/atmel-quadspi.c
> @@ -19,6 +19,7 @@
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> +#include <linux/of_platform.h>
>  #include <linux/platform_device.h>
>  #include <linux/spi/spi-mem.h>
>  
> @@ -35,7 +36,9 @@
>  
>  #define QSPI_IAR     0x0030  /* Instruction Address Register */
>  #define QSPI_ICR     0x0034  /* Instruction Code Register */
> +#define QSPI_WICR    0x0034  /* Write Instruction Code Register */
>  #define QSPI_IFR     0x0038  /* Instruction Frame Register */
> +#define QSPI_RICR    0x003C  /* Read Instruction Code Register */
>  
>  #define QSPI_SMR     0x0040  /* Scrambling Mode Register */
>  #define QSPI_SKR     0x0044  /* Scrambling Key Register */
> @@ -88,7 +91,7 @@
>  #define QSPI_SCR_DLYBS_MASK             GENMASK(23, 16)
>  #define QSPI_SCR_DLYBS(n)               (((n) << 16) & QSPI_SCR_DLYBS_MASK)
>  
> -/* Bitfields in QSPI_ICR (Instruction Code Register) */
> +/* Bitfields in QSPI_ICR (Read/Write Instruction Code Register) */
>  #define QSPI_ICR_INST_MASK              GENMASK(7, 0)
>  #define QSPI_ICR_INST(inst)             (((inst) << 0) & QSPI_ICR_INST_MASK)
>  #define QSPI_ICR_OPT_MASK               GENMASK(23, 16)
> @@ -118,6 +121,7 @@
>  #define QSPI_IFR_CRM                    BIT(14)
>  #define QSPI_IFR_NBDUM_MASK             GENMASK(20, 16)
>  #define QSPI_IFR_NBDUM(n)               (((n) << 16) & QSPI_IFR_NBDUM_MASK)
> +#define QSPI_IFR_APBTFRTYP_READ		BIT(24)	/* Defined in SAM9X60 */
>  
>  /* Bitfields in QSPI_SMR (Scrambling Mode Register) */
>  #define QSPI_SMR_SCREN                  BIT(0)
> @@ -133,12 +137,18 @@
>  #define QSPI_WPSR_WPVSRC_MASK           GENMASK(15, 8)
>  #define QSPI_WPSR_WPVSRC(src)           (((src) << 8) & QSPI_WPSR_WPVSRC)
>  
> +struct atmel_qspi_caps {
> +	bool has_qspick;
> +	bool has_ricr;
> +};
>  
>  struct atmel_qspi {
>  	void __iomem		*regs;
>  	void __iomem		*mem;
>  	struct clk		*pclk;
> +	struct clk		*qspick;
>  	struct platform_device	*pdev;
> +	const struct atmel_qspi_caps *caps;
>  	u32			pending;
>  	u32			mr;
>  	struct completion	cmd_completion;
> @@ -151,7 +161,7 @@ struct atmel_qspi_mode {
>  	u32 config;
>  };
>  
> -static const struct atmel_qspi_mode sama5d2_qspi_modes[] = {
> +static const struct atmel_qspi_mode atmel_qspi_modes[] = {
>  	{ 1, 1, 1, QSPI_IFR_WIDTH_SINGLE_BIT_SPI },
>  	{ 1, 1, 2, QSPI_IFR_WIDTH_DUAL_OUTPUT },
>  	{ 1, 1, 4, QSPI_IFR_WIDTH_QUAD_OUTPUT },
> @@ -180,8 +190,8 @@ static int atmel_qspi_find_mode(const struct spi_mem_op *op)
>  {
>  	u32 i;
>  
> -	for (i = 0; i < ARRAY_SIZE(sama5d2_qspi_modes); i++)
> -		if (atmel_qspi_is_compatible(op, &sama5d2_qspi_modes[i]))
> +	for (i = 0; i < ARRAY_SIZE(atmel_qspi_modes); i++)
> +		if (atmel_qspi_is_compatible(op, &atmel_qspi_modes[i]))
>  			return i;
>  
>  	return -ENOTSUPP;
> @@ -201,36 +211,37 @@ static bool atmel_qspi_supports_op(struct spi_mem *mem,
>  	return true;
>  }
>  
> -static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
> +static int atmel_qspi_set_cfg(struct atmel_qspi *aq,
> +			      const struct spi_mem_op *op, u32 *offset)
>  {
> -	struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->master);
> -	int mode;
> +	u32 iar, icr, ifr;
>  	u32 dummy_cycles = 0;
> -	u32 iar, icr, ifr, sr;
> -	int err = 0;
> +	int mode;
>  
>  	iar = 0;
>  	icr = QSPI_ICR_INST(op->cmd.opcode);
>  	ifr = QSPI_IFR_INSTEN;
>  
> -	/*
> -	 * If the QSPI controller is set in regular SPI mode, set it in
> -	 * Serial Memory Mode (SMM).
> -	 */
> -	if (aq->mr != QSPI_MR_SMM) {
> -		writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR);
> -		aq->mr = QSPI_MR_SMM;
> -	}
> -
>  	mode = atmel_qspi_find_mode(op);
>  	if (mode < 0)
>  		return mode;
> -
> -	ifr |= sama5d2_qspi_modes[mode].config;
> +	ifr |= atmel_qspi_modes[mode].config;
>  
>  	if (op->dummy.buswidth && op->dummy.nbytes)
>  		dummy_cycles = op->dummy.nbytes * 8 / op->dummy.buswidth;
>  
> +	/*
> +	 * The controller allows 24 and 32-bit addressing while NAND-flash
> +	 * requires 16-bit long. Handling 8-bit long addresses is done using
> +	 * the option field. For the 16-bit addresses, the workaround depends
> +	 * of the number of requested dummy bits. If there are 8 or more dummy
> +	 * cycles, the address is shifted and sent with the first dummy byte.
> +	 * Otherwise opcode is disabled and the first byte of the address
> +	 * contains the command opcode (works only if the opcode and address
> +	 * use the same buswidth). The limitation is when the 16-bit address is
> +	 * used without enough dummy cycles and the opcode is using a different
> +	 * buswidth than the address.
> +	 */
>  	if (op->addr.buswidth) {
>  		switch (op->addr.nbytes) {
>  		case 0:
> @@ -264,6 +275,9 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
>  		}
>  	}
>  
> +	/* offset of the data access in the QSPI memory space */
> +	*offset = iar;
> +
>  	/* Set number of dummy cycles */
>  	if (dummy_cycles)
>  		ifr |= QSPI_IFR_NBDUM(dummy_cycles);
> @@ -272,16 +286,51 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
>  	if (op->data.nbytes)
>  		ifr |= QSPI_IFR_DATAEN;
>  
> -	if (op->data.dir == SPI_MEM_DATA_OUT)
> -		ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR;
> +	/*
> +	 * If the QSPI controller is set in regular SPI mode, set it in
> +	 * Serial Memory Mode (SMM).
> +	 */
> +	if (aq->mr != QSPI_MR_SMM) {
> +		writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR);
> +		aq->mr = QSPI_MR_SMM;
> +	}
>  
>  	/* Clear pending interrupts */
>  	(void)readl_relaxed(aq->regs + QSPI_SR);
>  
> -	/* Set QSPI Instruction Frame registers */
> -	writel_relaxed(iar, aq->regs + QSPI_IAR);
> -	writel_relaxed(icr, aq->regs + QSPI_ICR);
> -	writel_relaxed(ifr, aq->regs + QSPI_IFR);
> +	if (aq->caps->has_ricr) {
> +		if (!op->addr.nbytes && op->data.dir == SPI_MEM_DATA_IN)
> +			ifr |= QSPI_IFR_APBTFRTYP_READ;
> +
> +		/* Set QSPI Instruction Frame registers */
> +		writel_relaxed(iar, aq->regs + QSPI_IAR);
> +		if (op->data.dir == SPI_MEM_DATA_IN)
> +			writel_relaxed(icr, aq->regs + QSPI_RICR);
> +		else
> +			writel_relaxed(icr, aq->regs + QSPI_WICR);
> +		writel_relaxed(ifr, aq->regs + QSPI_IFR);
> +	} else {
> +		if (op->data.dir == SPI_MEM_DATA_OUT)
> +			ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR;
> +
> +		/* Set QSPI Instruction Frame registers */
> +		writel_relaxed(iar, aq->regs + QSPI_IAR);
> +		writel_relaxed(icr, aq->regs + QSPI_ICR);
> +		writel_relaxed(ifr, aq->regs + QSPI_IFR);
> +	}
> +
> +	return 0;
> +}
> +
> +static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
> +{
> +	struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->master);
> +	u32 sr, offset;
> +	int err;
> +
> +	err = atmel_qspi_set_cfg(aq, op, &offset);
> +	if (err)
> +		return err;
>  
>  	/* Skip to the final steps if there is no data */
>  	if (op->data.nbytes) {
> @@ -290,11 +339,11 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
>  
>  		/* Send/Receive data */
>  		if (op->data.dir == SPI_MEM_DATA_IN)
> -			_memcpy_fromio(op->data.buf.in,
> -				aq->mem + iar, op->data.nbytes);
> +			_memcpy_fromio(op->data.buf.in, aq->mem + offset,
> +				       op->data.nbytes);
>  		else
> -			_memcpy_toio(aq->mem + iar,
> -				op->data.buf.out, op->data.nbytes);
> +			_memcpy_toio(aq->mem + offset, op->data.buf.out,
> +				     op->data.nbytes);
>  
>  		/* Release the chip-select */
>  		writel_relaxed(QSPI_CR_LASTXFER, aq->regs + QSPI_CR);
> @@ -450,28 +499,55 @@ static int atmel_qspi_probe(struct platform_device *pdev)
>  		goto exit;
>  	}
>  
> +	aq->caps = of_device_get_match_data(&pdev->dev);
> +	if (!aq->caps) {
> +		dev_err(&pdev->dev, "Could not retrieve QSPI caps\n");
> +		err = -EINVAL;
> +		goto exit;
> +	}
> +
> +	if (aq->caps->has_qspick) {
> +		/* Get the QSPI system clock */
> +		aq->qspick = devm_clk_get(&pdev->dev, "qspick");
> +		if (IS_ERR(aq->qspick)) {
> +			dev_err(&pdev->dev, "missing system clock\n");
> +			err = PTR_ERR(aq->qspick);
> +			goto disable_pclk;
> +		}
> +
> +		/* Enable the QSPI system clock */
> +		err = clk_prepare_enable(aq->qspick);
> +		if (err) {
> +			dev_err(&pdev->dev,
> +				"failed to enable the QSPI system clock\n");
> +			goto disable_pclk;
> +		}
> +	}
> +
>  	/* Request the IRQ */
>  	irq = platform_get_irq(pdev, 0);
>  	if (irq < 0) {
>  		dev_err(&pdev->dev, "missing IRQ\n");
>  		err = irq;
> -		goto disable_pclk;
> +		goto disable_qspick;
>  	}
>  	err = devm_request_irq(&pdev->dev, irq, atmel_qspi_interrupt,
>  			       0, dev_name(&pdev->dev), aq);
>  	if (err)
> -		goto disable_pclk;
> +		goto disable_qspick;
>  
>  	err = atmel_qspi_init(aq);
>  	if (err)
> -		goto disable_pclk;
> +		goto disable_qspick;
>  
>  	err = spi_register_controller(ctrl);
>  	if (err)
> -		goto disable_pclk;
> +		goto disable_qspick;
>  
>  	return 0;
>  
> +disable_qspick:
> +	clk_disable_unprepare(aq->qspick);
>  disable_pclk:
>  	clk_disable_unprepare(aq->pclk);
>  exit:
> @@ -487,6 +563,7 @@ static int atmel_qspi_remove(struct platform_device *pdev)
>  
>  	spi_unregister_controller(ctrl);
>  	writel_relaxed(QSPI_CR_QSPIDIS, aq->regs + QSPI_CR);
> +	clk_disable_unprepare(aq->qspick);
>  	clk_disable_unprepare(aq->pclk);
>  	return 0;
>  }
> @@ -495,6 +572,7 @@ static int __maybe_unused atmel_qspi_suspend(struct device *dev)
>  {
>  	struct atmel_qspi *aq = dev_get_drvdata(dev);
>  
> +	clk_disable_unprepare(aq->qspick);
>  	clk_disable_unprepare(aq->pclk);
>  
>  	return 0;
> @@ -505,6 +583,7 @@ static int __maybe_unused atmel_qspi_resume(struct device *dev)
>  	struct atmel_qspi *aq = dev_get_drvdata(dev);
>  
>  	clk_prepare_enable(aq->pclk);
> +	clk_prepare_enable(aq->qspick);
>  
>  	return atmel_qspi_init(aq);
>  }
> @@ -512,8 +591,22 @@ static int __maybe_unused atmel_qspi_resume(struct device *dev)
>  static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
>  			 atmel_qspi_resume);
>  
> +static const struct atmel_qspi_caps atmel_sama5d2_qspi_caps = {};
> +
> +static const struct atmel_qspi_caps atmel_sam9x60_qspi_caps = {
> +	.has_qspick = true,
> +	.has_ricr = true,
> +};
> +
>  static const struct of_device_id atmel_qspi_dt_ids[] = {
> -	{ .compatible = "atmel,sama5d2-qspi" },
> +	{
> +		.compatible = "atmel,sama5d2-qspi",
> +		.data = &atmel_sama5d2_qspi_caps,
> +	},
> +	{
> +		.compatible = "microchip,sam9x60-qspi",
> +		.data = &atmel_sam9x60_qspi_caps,
> +	},
>  	{ /* sentinel */ }
>  };
>  


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Applied "spi: atmel-quadspi: add support for sam9x60 qspi controller" to the spi tree

[Mark Brown]

The patch

   spi: atmel-quadspi: add support for sam9x60 qspi controller

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 2e5c888873586400e3e9197514995458c7f4c3e0 Mon Sep 17 00:00:00 2001
From: Tudor Ambarus <tudor.ambarus@microchip.com>
Date: Tue, 5 Feb 2019 17:33:38 +0000
Subject: [PATCH] spi: atmel-quadspi: add support for sam9x60 qspi controller

The sam9x60 qspi controller uses 2 clocks, one for the peripheral register
access, the other for the qspi core and phy. Both are mandatory. It uses
different transfer type bits in IFR register. It has dedicated registers
to specify a read or a write instruction: Read Instruction Code Register
(RICR) and Write Instruction Code Register (WICR). ICR/RICR/WICR have
identical fields.

Tested with sst26vf064b jedec,spi-nor flash. Backward compatibility test
done on sama5d2 qspi controller and mx25l25635e jedec,spi-nor flash.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/atmel-quadspi.c | 163 ++++++++++++++++++++++++++++--------
 1 file changed, 128 insertions(+), 35 deletions(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index 336501d962e5..fffc21cd5f79 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi-mem.h>
 
@@ -35,7 +36,9 @@
 
 #define QSPI_IAR     0x0030  /* Instruction Address Register */
 #define QSPI_ICR     0x0034  /* Instruction Code Register */
+#define QSPI_WICR    0x0034  /* Write Instruction Code Register */
 #define QSPI_IFR     0x0038  /* Instruction Frame Register */
+#define QSPI_RICR    0x003C  /* Read Instruction Code Register */
 
 #define QSPI_SMR     0x0040  /* Scrambling Mode Register */
 #define QSPI_SKR     0x0044  /* Scrambling Key Register */
@@ -88,7 +91,7 @@
 #define QSPI_SCR_DLYBS_MASK             GENMASK(23, 16)
 #define QSPI_SCR_DLYBS(n)               (((n) << 16) & QSPI_SCR_DLYBS_MASK)
 
-/* Bitfields in QSPI_ICR (Instruction Code Register) */
+/* Bitfields in QSPI_ICR (Read/Write Instruction Code Register) */
 #define QSPI_ICR_INST_MASK              GENMASK(7, 0)
 #define QSPI_ICR_INST(inst)             (((inst) << 0) & QSPI_ICR_INST_MASK)
 #define QSPI_ICR_OPT_MASK               GENMASK(23, 16)
@@ -118,6 +121,7 @@
 #define QSPI_IFR_CRM                    BIT(14)
 #define QSPI_IFR_NBDUM_MASK             GENMASK(20, 16)
 #define QSPI_IFR_NBDUM(n)               (((n) << 16) & QSPI_IFR_NBDUM_MASK)
+#define QSPI_IFR_APBTFRTYP_READ		BIT(24)	/* Defined in SAM9X60 */
 
 /* Bitfields in QSPI_SMR (Scrambling Mode Register) */
 #define QSPI_SMR_SCREN                  BIT(0)
@@ -133,12 +137,18 @@
 #define QSPI_WPSR_WPVSRC_MASK           GENMASK(15, 8)
 #define QSPI_WPSR_WPVSRC(src)           (((src) << 8) & QSPI_WPSR_WPVSRC)
 
+struct atmel_qspi_caps {
+	bool has_qspick;
+	bool has_ricr;
+};
 
 struct atmel_qspi {
 	void __iomem		*regs;
 	void __iomem		*mem;
 	struct clk		*pclk;
+	struct clk		*qspick;
 	struct platform_device	*pdev;
+	const struct atmel_qspi_caps *caps;
 	u32			pending;
 	u32			mr;
 	struct completion	cmd_completion;
@@ -151,7 +161,7 @@ struct atmel_qspi_mode {
 	u32 config;
 };
 
-static const struct atmel_qspi_mode sama5d2_qspi_modes[] = {
+static const struct atmel_qspi_mode atmel_qspi_modes[] = {
 	{ 1, 1, 1, QSPI_IFR_WIDTH_SINGLE_BIT_SPI },
 	{ 1, 1, 2, QSPI_IFR_WIDTH_DUAL_OUTPUT },
 	{ 1, 1, 4, QSPI_IFR_WIDTH_QUAD_OUTPUT },
@@ -180,8 +190,8 @@ static int atmel_qspi_find_mode(const struct spi_mem_op *op)
 {
 	u32 i;
 
-	for (i = 0; i < ARRAY_SIZE(sama5d2_qspi_modes); i++)
-		if (atmel_qspi_is_compatible(op, &sama5d2_qspi_modes[i]))
+	for (i = 0; i < ARRAY_SIZE(atmel_qspi_modes); i++)
+		if (atmel_qspi_is_compatible(op, &atmel_qspi_modes[i]))
 			return i;
 
 	return -ENOTSUPP;
@@ -201,36 +211,37 @@ static bool atmel_qspi_supports_op(struct spi_mem *mem,
 	return true;
 }
 
-static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
+static int atmel_qspi_set_cfg(struct atmel_qspi *aq,
+			      const struct spi_mem_op *op, u32 *offset)
 {
-	struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->master);
-	int mode;
+	u32 iar, icr, ifr;
 	u32 dummy_cycles = 0;
-	u32 iar, icr, ifr, sr;
-	int err = 0;
+	int mode;
 
 	iar = 0;
 	icr = QSPI_ICR_INST(op->cmd.opcode);
 	ifr = QSPI_IFR_INSTEN;
 
-	/*
-	 * If the QSPI controller is set in regular SPI mode, set it in
-	 * Serial Memory Mode (SMM).
-	 */
-	if (aq->mr != QSPI_MR_SMM) {
-		writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR);
-		aq->mr = QSPI_MR_SMM;
-	}
-
 	mode = atmel_qspi_find_mode(op);
 	if (mode < 0)
 		return mode;
-
-	ifr |= sama5d2_qspi_modes[mode].config;
+	ifr |= atmel_qspi_modes[mode].config;
 
 	if (op->dummy.buswidth && op->dummy.nbytes)
 		dummy_cycles = op->dummy.nbytes * 8 / op->dummy.buswidth;
 
+	/*
+	 * The controller allows 24 and 32-bit addressing while NAND-flash
+	 * requires 16-bit long. Handling 8-bit long addresses is done using
+	 * the option field. For the 16-bit addresses, the workaround depends
+	 * of the number of requested dummy bits. If there are 8 or more dummy
+	 * cycles, the address is shifted and sent with the first dummy byte.
+	 * Otherwise opcode is disabled and the first byte of the address
+	 * contains the command opcode (works only if the opcode and address
+	 * use the same buswidth). The limitation is when the 16-bit address is
+	 * used without enough dummy cycles and the opcode is using a different
+	 * buswidth than the address.
+	 */
 	if (op->addr.buswidth) {
 		switch (op->addr.nbytes) {
 		case 0:
@@ -264,6 +275,9 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 		}
 	}
 
+	/* offset of the data access in the QSPI memory space */
+	*offset = iar;
+
 	/* Set number of dummy cycles */
 	if (dummy_cycles)
 		ifr |= QSPI_IFR_NBDUM(dummy_cycles);
@@ -272,16 +286,51 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 	if (op->data.nbytes)
 		ifr |= QSPI_IFR_DATAEN;
 
-	if (op->data.dir == SPI_MEM_DATA_OUT)
-		ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR;
+	/*
+	 * If the QSPI controller is set in regular SPI mode, set it in
+	 * Serial Memory Mode (SMM).
+	 */
+	if (aq->mr != QSPI_MR_SMM) {
+		writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR);
+		aq->mr = QSPI_MR_SMM;
+	}
 
 	/* Clear pending interrupts */
 	(void)readl_relaxed(aq->regs + QSPI_SR);
 
-	/* Set QSPI Instruction Frame registers */
-	writel_relaxed(iar, aq->regs + QSPI_IAR);
-	writel_relaxed(icr, aq->regs + QSPI_ICR);
-	writel_relaxed(ifr, aq->regs + QSPI_IFR);
+	if (aq->caps->has_ricr) {
+		if (!op->addr.nbytes && op->data.dir == SPI_MEM_DATA_IN)
+			ifr |= QSPI_IFR_APBTFRTYP_READ;
+
+		/* Set QSPI Instruction Frame registers */
+		writel_relaxed(iar, aq->regs + QSPI_IAR);
+		if (op->data.dir == SPI_MEM_DATA_IN)
+			writel_relaxed(icr, aq->regs + QSPI_RICR);
+		else
+			writel_relaxed(icr, aq->regs + QSPI_WICR);
+		writel_relaxed(ifr, aq->regs + QSPI_IFR);
+	} else {
+		if (op->data.dir == SPI_MEM_DATA_OUT)
+			ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR;
+
+		/* Set QSPI Instruction Frame registers */
+		writel_relaxed(iar, aq->regs + QSPI_IAR);
+		writel_relaxed(icr, aq->regs + QSPI_ICR);
+		writel_relaxed(ifr, aq->regs + QSPI_IFR);
+	}
+
+	return 0;
+}
+
+static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->master);
+	u32 sr, offset;
+	int err;
+
+	err = atmel_qspi_set_cfg(aq, op, &offset);
+	if (err)
+		return err;
 
 	/* Skip to the final steps if there is no data */
 	if (op->data.nbytes) {
@@ -290,11 +339,11 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 
 		/* Send/Receive data */
 		if (op->data.dir == SPI_MEM_DATA_IN)
-			_memcpy_fromio(op->data.buf.in,
-				aq->mem + iar, op->data.nbytes);
+			_memcpy_fromio(op->data.buf.in, aq->mem + offset,
+				       op->data.nbytes);
 		else
-			_memcpy_toio(aq->mem + iar,
-				op->data.buf.out, op->data.nbytes);
+			_memcpy_toio(aq->mem + offset, op->data.buf.out,
+				     op->data.nbytes);
 
 		/* Release the chip-select */
 		writel_relaxed(QSPI_CR_LASTXFER, aq->regs + QSPI_CR);
@@ -450,28 +499,55 @@ static int atmel_qspi_probe(struct platform_device *pdev)
 		goto exit;
 	}
 
+	aq->caps = of_device_get_match_data(&pdev->dev);
+	if (!aq->caps) {
+		dev_err(&pdev->dev, "Could not retrieve QSPI caps\n");
+		err = -EINVAL;
+		goto exit;
+	}
+
+	if (aq->caps->has_qspick) {
+		/* Get the QSPI system clock */
+		aq->qspick = devm_clk_get(&pdev->dev, "qspick");
+		if (IS_ERR(aq->qspick)) {
+			dev_err(&pdev->dev, "missing system clock\n");
+			err = PTR_ERR(aq->qspick);
+			goto disable_pclk;
+		}
+
+		/* Enable the QSPI system clock */
+		err = clk_prepare_enable(aq->qspick);
+		if (err) {
+			dev_err(&pdev->dev,
+				"failed to enable the QSPI system clock\n");
+			goto disable_pclk;
+		}
+	}
+
 	/* Request the IRQ */
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "missing IRQ\n");
 		err = irq;
-		goto disable_pclk;
+		goto disable_qspick;
 	}
 	err = devm_request_irq(&pdev->dev, irq, atmel_qspi_interrupt,
 			       0, dev_name(&pdev->dev), aq);
 	if (err)
-		goto disable_pclk;
+		goto disable_qspick;
 
 	err = atmel_qspi_init(aq);
 	if (err)
-		goto disable_pclk;
+		goto disable_qspick;
 
 	err = spi_register_controller(ctrl);
 	if (err)
-		goto disable_pclk;
+		goto disable_qspick;
 
 	return 0;
 
+disable_qspick:
+	clk_disable_unprepare(aq->qspick);
 disable_pclk:
 	clk_disable_unprepare(aq->pclk);
 exit:
@@ -487,6 +563,7 @@ static int atmel_qspi_remove(struct platform_device *pdev)
 
 	spi_unregister_controller(ctrl);
 	writel_relaxed(QSPI_CR_QSPIDIS, aq->regs + QSPI_CR);
+	clk_disable_unprepare(aq->qspick);
 	clk_disable_unprepare(aq->pclk);
 	return 0;
 }
@@ -495,6 +572,7 @@ static int __maybe_unused atmel_qspi_suspend(struct device *dev)
 {
 	struct atmel_qspi *aq = dev_get_drvdata(dev);
 
+	clk_disable_unprepare(aq->qspick);
 	clk_disable_unprepare(aq->pclk);
 
 	return 0;
@@ -505,6 +583,7 @@ static int __maybe_unused atmel_qspi_resume(struct device *dev)
 	struct atmel_qspi *aq = dev_get_drvdata(dev);
 
 	clk_prepare_enable(aq->pclk);
+	clk_prepare_enable(aq->qspick);
 
 	return atmel_qspi_init(aq);
 }
@@ -512,8 +591,22 @@ static int __maybe_unused atmel_qspi_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
 			 atmel_qspi_resume);
 
+static const struct atmel_qspi_caps atmel_sama5d2_qspi_caps = {};
+
+static const struct atmel_qspi_caps atmel_sam9x60_qspi_caps = {
+	.has_qspick = true,
+	.has_ricr = true,
+};
+
 static const struct of_device_id atmel_qspi_dt_ids[] = {
-	{ .compatible = "atmel,sama5d2-qspi" },
+	{
+		.compatible = "atmel,sama5d2-qspi",
+		.data = &atmel_sama5d2_qspi_caps,
+	},
+	{
+		.compatible = "microchip,sam9x60-qspi",
+		.data = &atmel_sam9x60_qspi_caps,
+	},
 	{ /* sentinel */ }
 };
 
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/